LG Innotek REBEMZ29A User Manual

ELS 2.9 Mono Graphic Type Manual

Ver. 0.2

2015.04.14

1. ELS Description & Key Function

사내한

 Remote control device provides customer with several functions as below
 Waking Tag up from sleep mode
 Updating new purchase image on Tag
 Deleting purchase image on Tag
 Returning a Tag to be factory settings

Display Area

 Remo-con description

Profile Hook

Battery Cover

 LED : One of any buttons is pushed, green led turns on.

 Registration : Updating New Purchase Information on Tag

 Release : Deleting Purchase Information on Tag

 Reset : Returning a Tag to be factory settings

 Keep Alive : Waking Tag up from sleep mode

Copyrightⓒ. 2015. All Rights Reserved.

After sending some data to a Tag, green led will turn off.

2. “Registration” Key Function

사내한

☜

To change purchase information on Tag, perform the following steps :

1. Put remote controller near center of Tag‟s display

2. Press and hold „Registration‟ button on remote controller until green LED off
(about 0.5 seconds)

3. When Tag is successfully received „Registration‟ data from remote controller,
Tag‟s display will be changed to “Connected” for a few minutes.
That means Tag hides purchase image to read Tag‟s IEEE MAC address through
the Barcode scanner

4. In NMS Client, download new purchase image to the Tag in registration status

5. When image downloading is finished successfully,
Tag‟s display will be changed to new purchase image

Copyrightⓒ. 2015. All Rights Reserved.