LG Innotek RBDAG332A User Manual
• User Manual
Dimensions
Description
- Model : RBDA-G332A
- Profile : Hands free(1.6), A2DP (1.2), AVRCP (1.4)
- Bluetooth: v3.0+EDR
- Frequency Range : 2402MHz ~ 2480MHz
Features
- Dimension : 35.3 X 35.3 X 7.8mm
- Temperature Range : -40℃ ~ +85℃
- Supply Voltage : VREGIN – 3.1V to 3.6V
- Output Power
BT: Typ. 1dBm(Class 2)
- Sensitivity
BT: -80dBm
Interface
-. BT: UART, I2S
Application
- Automotive
PART NO.
NO. Changes
1.0.1 `13.10.10
Deployment
NAME MATERIAL SPEC FINISH SIZE
LG Innotek Co, Ltd
UNIT SCALE
DRAW DSGD CHKD APPD
B
H
Choi
I
P
Park
K
S
Kim
TITLE
User Manual(1/5)
DOCUMENT NO.
RBDA-G332A(FCC)
* Power Supply Specification
The power of DC3.1V ~ 3.6V is should be supplied to the Bluetooth module power(VDD). The
module supplies the power to the each block depending on the function. Module input power in
excess of the rated input power may cause damage to the internal components. And the influx of
Surge and ESD also may lead to the damage of the modem in the vehicle. For the prevention of this,
the module is necessary to design block the infloux of Sugre and EDS.
Pin NO. Signal Name
13.14 VDD In 3.1V 3.3V 3.6V
* Data Tx/Rx Specification
The Bluetooth modules communicates with other bluetooth devices using Bluetooth communication
technology. It has the data buffer used to receive and process data transmitted at 625㎲ time
intervals defined in the Bluetooth specification from the remote device. This buffer is enough to
process the data sent at the ideal speed(3Mbps). Additionally in order to prevent the buffer overflow,
the module could control the transmission by the flow control scheme defined in the Bluetooth
specification.
* UART ( RS-232 Interface )
The module has the UART interface to communicate with other serial devices using the RS232
protocol. the UART parameters such as the packet format and baud rate are configured by the
module firmware.
Function
(Module case)
MIN TYP MAX
PART NO.
NO. Changes
1.0.1 `13.10.10
Deployment
NAME MATERIAL SPEC FINISH SIZE
LG Innotek Co, Ltd
UNIT SCALE
DRAW DSGD CHKD APPD
B
H
Choi
I
P
Park
K
S
Kim
TITLE
User Manual(2/5)
DOCUMENT NO.
RBDA-G332A(FCC)
General Features
RBDA-G332A satisfies the following standards
1)Griffin Bluetooth Module Features
• Bluetooth Power Class 2
• Bluetooth v3.0 + EDR Compliant
• Support for Wide-Band Speech.
• Embedded Fully Bluetooth v2.0/v2.1 + EDR System Compliant
• Embedded Bluetooth Profile
• Embedded AEC/NR Algorithm for Hands-free
• Embedded 16-bits Stereo CODEC
• Operation Voltage is 3.3V Single Power Rail
• Excellent Compatibility with Cellular Telephones
• Command and data Interface is UART
• Audio Input/Output Interface is I2S
• Support Software update by UART
• Support for 802.11 Co-existence
• RoHS Compliant
2) Functionality Key Features : 2.1+EDR
• Secure simple pairing
• Sniff sub-rating
• Encryption pause resume
• Packet boundary flags
• Encryption
• Extended inquiry response
3) Functionality Key Features : 2.0+EDR
• Adaptive frequency hopping (AFH), including classifier
• Faster connection - enhanced inquiry scan (immediate FHS response)
• LMP improvements
• Adaptive Frequency Hopping (AFH) as Master and Automatic Channel Classification
• Fast Connect-Interlaced Inquiry and Page Scan plus RSSI during Inquiry
• Extended SCO (eSCO), eV3 +CRC, eV4, eV5 • SCO handle
• Synchronization
4) Support Profiles
• GAP
• HFP : 1.6
• A2DP : 1.2
• AVRCP : 1..4
• PBAP : 1.1
• MAP : 1.0
• SPP : 1.1
PART NO.
NAME MATERIAL SPEC FINISH SIZE
UNIT SCALE
NO. Changes
1.0.1 `13.10.10
Deployment
LG Innotek Co, Ltd
DRAW DSGD CHKD APPD
B
H
Choi
I
P
Park
K
S
Kim
TITLE
User Manual(3/5)
DOCUMENT NO.
RBDA-G332A(FCC)
Loading...