LG ZLG9021 User Manual

Download

Page 1

Data Sheet

ZLG9021P0-1-TC

Data Sheet

Bluetooth

DS01010101 V1.00 Date: 2016/4/14

Guangzhou ZLG MCU Technology Co.,LTD.

Typ

Content

Seywords

ZLG9021P0-1-TC, Essential information

Summary

Brief introduction to the basic parameters of the module

Page 2

Guangzhou ZLG MCU Technology Co.,LTD.

ZLG9021P0-1

Bluetooth

Catalog

1. Basic information ....................................................................................................... 1

2. Mechanical Dimensions ............................................................................................. 2

3. Electrical Parameters ................................................................................................. 3

3.1 Working Conditions .................................................................................................. 3

3.2 Power Parameter ....................................................................................................... 3

3.3 Wireless Parameters .................................................................................................. 3

4. Typical Application Circuit ........................................................................................ 4

5. Classification reflow profiles ..................................................................................... 5

Page 3

Guangzhou ZLG MCU Technology Co.,LTD.

ZLG9021P0-1

1. Basic information

Product name: BLE Wireless transmission module Model:ZLG9021P0-1-TC ZLG9021P0-1-TC’s pin assignment diagram and physical diagram are shown below

Bluetooth

Fig1.1 Pin assignment diagram

Fig1.2 Physical diagram

Page 4

Guangzhou ZLG MCU Technology Co.,LTD.

ZLG9021P0-1

2. Mechanical Dimensions

Bluetooth

Fig2.1 Size

Notes: [1]Length and width dimension tolerance.minimum value 0.2mm,Typical value 0.3mm,Maximum

value 0.4mm .

[2]Thickness: 1.8mm±0.15mm.

Page 5

Guangzhou ZLG MCU Technology Co.,LTD.

ZLG9021P0-1

Symbol

Parameter

Conditions

Min

Typ

Max

Unit

VCC

Power supply

relative to

GND

2.4

3.3

3.6 V VDD

Power supply

relative to

GND

2.4

3.3

3.6 V TA

working

temperature

-40

+25

+85

℃

Symbol

Working mode

Typ

Unit

Current

deep sleep

2.32

µA

sleep normal

3.29

µA

Tx mode @0dbm

[1]

Rx mode

[2]

Symbol

Condition

Typ

Unit

wireless

parameters

frequency range

2400 ~ 2483.5

MHz

output power

-20 ~ 4

dBm

Output power adjustment step

Rx sensitivity

-93

dBm

maximum input signal level

dBm

3. Electrical Parameters

3.1 Working Conditions

Table3.1 Operating conditions

3.2 Power Parameter

Bluetooth

Table3.2 Power current

Ambient temperature: 25 C working voltage: 3.3V working mode: LDO mode

Notes: [1] Send the condition for the carrier to send continuously；

[2] Receiving condition is continuous.

3.3 Wireless Parameters

Table3.3 RF receiver characteristics

Page 6

Guangzhou ZLG MCU Technology Co.,LTD.

ZLG9021P0-1

4. Typical Application Circuit

Fig4.1 Typical application circuit

Notes: Module internal integrated RC reset circuit.

Bluetooth

Page 7

Guangzhou ZLG MCU Technology Co.,LTD.

ZLG9021P0-1

5. Classification reflow profiles

Bluetooth

Page 8

Guangzhou ZLG MCU Technology Co.,LTD.

ZLG9021P0-1

Bluetooth

6. Rights & Statements

This document is owned by Guangzhou ZLG MCU Technology Co.,LTD. (ZLG), and protected by applicable copyright law. The document is provided in “as is”. No warranty is made (explicitly, implicitly or legally). Such warranties are including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose to use this document. In no event shall ZLG be liable for any direct, indirect, incidental, special, exemplary, or consequential damages arising in any way out of the use of this document.

For future development, ZLG Electronics reserves the right to modify this document at any time without prior notice. ZLG Electronics shall not be liable for any responsibilities other than those specified explicitly in its sales terms and conditions.

The figures within this document are only for reference; if there is any difference with the practical item, please use the image of the practical item. Copyright ©2014, Guangzhou ZLG MCU Technology Co.,LTD.; All rights reserved.

Page 9

Guangzhou ZLG MCU Technology Co.,LTD.

ZLG9021P0-1

Bluetooth

7. Important compliance information for North American users

The ZLG9021P0-1-TC Module has been granted modular approval for mobile applications. Integrators may use the ZLG9021P0-1-TC Module in their final products without additional FCC certification if they meet the following conditions. Otherwise, additional FCC approvals must be obtained.

1. At least 20cm separation distance between the antenna and the user’s body

must be maintained at all times.

2. To comply with FCC regulations limiting both maximum RF output power and human exposure to RF radiation, the maximum antenna gain including cable loss in a mobile-only exposure condition must not exceed 5dBi in the 2.4G band.

3. The ZLG9021P0-1-TC Module and its antenna must not be co-located or operating in conjunction with any other transmitter or antenna within a host device.

4. A label must be affixed to the outside of the end product into which the ZLG9021P0-1-TC Module is incorporated, with a statement similar to the following: For ZLG9021P0-1-TC Module: This device contains FCC ID: 2AIVAZLG9021.

5. A user manual with the end product must clearly indicate the operating requirements and conditions that must be observed to ensure compliance with current FCC RF exposure guidelines. The end product with an embedded ZLG9021P0-1-TC Module may also need to pass the FCC Part 15 unintentional emission testing requirements and be properly authorized per FCC Part 15.

Note: If this module is intended for use in a po rtable device, you are responsible for separate approval to

satisfy the SAR requirements of FCC Part 2.1093.

FCC NOTICE:

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:

Page 10

Guangzhou ZLG MCU Technology Co.,LTD.

ZLG9021P0-1

Bluetooth

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

The module in this product is labeled with its own FCC ID and IC No.. The FCC ID and IC is not visible when the module is installed inside another device. Therefore, the outside of the device into which the module is installed must also display a label referring to the module. The final end device must be labeled in a visible area with the following

“Contains FCC ID: 2AIVAZLG9021”

Caution:

The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

LG ZLG9021 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual