OWNER'S MANUAL
DISHWASHER
Before beginning installation, read these instructions carefully. This will simplify installation and ensure that the product is installed correctly and safely. Leave these instructions near the product after installation for future reference.
EN ENGLISH |
|
XD74* |
XD89** |
XD77* |
XD90** |
XD88** |
|
www.lg.com
MFL70282405 |
|
Rev.00_030218 |
Copyright © 2018 LG Electronics Inc. All Rights Reserved. |
|
TABLE OF CONTENTS
This manual may contain images or content different from the model you purchased.
This manual is subject to revision by the manufacturer.
SAFETY INSTRUCTIONS........................................................ |
3 |
IMPORTANT SAFETY INSTRUCTIONS.................................................... |
3 |
INSTALLATION....................................................................... |
10 |
Specifications............................................................................................ |
10 |
Accessories (On Some Models)................................................................ |
11 |
Preparing Cabinet Opening....................................................................... |
11 |
Installing Moisture Barrier Tape (On Some Models)................................. |
14 |
Levelling the Appliance............................................................................. |
14 |
Installing the Drain Hose........................................................................... |
15 |
Connecting the Water Supply Hose.......................................................... |
16 |
Preparing Electrical Wiring........................................................................ |
17 |
Final Check............................................................................................... |
17 |
OPERATION............................................................................ |
18 |
Before Using the Appliance....................................................................... |
18 |
Using the Appliance.................................................................................. |
22 |
Control Panel............................................................................................ |
23 |
Cycles....................................................................................................... |
25 |
Cycle Options............................................................................................ |
26 |
Auto Open Dry (AOD) (On Some Models)................................................ |
27 |
SignaLight™ (On Some Models).............................................................. |
27 |
Programme Guide (model dependent)...................................................... |
28 |
Available Options...................................................................................... |
29 |
Information for Energy Test (EN50242)..................................................... |
30 |
Loading the Dishwasher............................................................................ |
31 |
Adding Cleaning Agents............................................................................ |
36 |
Refilling..................................................................................................... |
38 |
Drying........................................................................................................ |
38 |
SMART FUNCTIONS.............................................................. |
39 |
Using LG SmartThinQ Application............................................................ |
39 |
Using Smart Diagnosis™.......................................................................... |
41 |
MAINTENANCE...................................................................... |
43 |
Cleaning the Exterior................................................................................. |
43 |
Cleaning the Interior.................................................................................. |
43 |
Cleaning the Filters................................................................................... |
44 |
Cleaning the Spray Arms.......................................................................... |
45 |
Cleaning the Water Supply Hose Filter..................................................... |
47 |
TROUBLESHOOTING............................................................ |
48 |
Diagnosing Problems................................................................................ |
48 |
Error Codes............................................................................................... |
53 |
SAFETY INSTRUCTIONS
EN
The following safety guidelines are intended to prevent unforeseen risks or damage from unsafe or incorrect operation of the appliance.
The guidelines are separated into ‘WARNING’ and ‘CAUTION’ as described below.
This symbol is displayed to indicate matters and
operations that can cause risk. Read the part with this symbol carefully and follow the instructions in order to avoid risk.
WARNING
This indicates that the failure to follow the instructions can cause serious injury or death.
CAUTION
This indicates that the failure to follow the instructions can cause the minor injury or damage to the product.
IMPORTANT SAFETY INSTRUCTIONS
WARNING
To reduce the risk of explosion, fire, death, electric shock, injury or scalding to persons when using this product, follow basic precautions, including the following:
Children in the Household
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
3
EN
Installation
••Never attempt to operate the appliance if it is damaged, malfunctioning, partially disassembled, or has missing or broken parts, including a damaged cord or plug.
••If the power cord is damaged or the hole of the socket outlet is loose, do not use the power cord and contact an authorized service centre.
••Do not modify the power cord provided with the appliance. Please contact the LG Customer information centre to advise of its incompatibility.
••This appliance should only be transported by two or more people holding the appliance securely.
••Do not install the appliance in a damp and dusty place. Do not install or store the appliance in any outdoor area, or any area that is subject to weathering conditions such as direct sunlight, wind, or rain or temperatures below freezing.
••Do not plug multiple socket outlets, an extension power cable or adapter with this appliance.
••Disconnect the power cord, house fuse or circuit breaker before installing or servicing the appliance.
••When moving or installing the product in a different location, call qualified service personnel for installation and service.
••Fix the drain hose securely in place.
••This appliance is not designed for maritime use or for mobile installations such as in RVs, trailers, or aircraft.
••This appliance must be positioned near to an electrical power supply.
••When installing or moving the appliance, be careful not to pinch, crush, or damage the power cord.
4
EN
••Use new hose or hose-set supplied with the appliance. Reusing old hoses can cause a water leak and subsequent property damage.
••Improper connection of the equipment-grounding conductor can result in risk of electric shock. Check with a qualified electrician or service personnel if you are in doubt as to whether the appliance is properly grounded.
••This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current.
••This appliance is equipped with a power cord having an equipment-grounding conductor and a grounding power plug. The power plug must be plugged into an appropriate socket outlet that is installed and grounded in accordance with all local codes and ordinances.
••After installing, check the hose connection for leaks before moving the appliance into the cabinet opening.
••Do not damage or place heavy items on the power cord of the appliance.
••This appliance is intended to be used in household and domestic applications only and must not be used for commercial purposes.
••For a permanently connected dishwasher: This appliance must be connected to a grounded metal, permanent wiring system, or an equipment-grounding conductor must be run with the circuit conductors and connected to the equipment-grounding terminal or lead to the appliance.
••Connect the ground wire to the green ground connector in the terminal box.
5
EN
Operation
••Immediately unplug the power plug and contact an LG Electronics customer information centre if you detect a strange sound, odour, or smoke coming from the appliance.
••Do not repair or replace any part of the appliance. All repairs and servicing must be performed by qualified service personnel unless specifically recommended in this Owner’s Manual. Use only authorized factory parts.
••Do not leave the appliance door open. Children may hang on the door or crawl inside the appliance, causing damage or injury.
••Do not use flammable gas and combustible substances (benzene, gasoline, thinner, petroleum, alcohol, etc.) near the appliance.
••Do not attempt to separate any panels or disassemble the appliance. Do not apply any sharp objects to the control panel in order to operate the appliance.
••Do not bend the power cable excessively or place a heavy object on it.
••Do not put animals, such as pets into the appliance.
••Do not touch the power plug or the appliance controls with wet hands.
••If there is a gas leakage (isobutane, propane, natural gas, etc.), do not touch the appliance or power plug and ventilate the area immediately.
••In case of flood, disconnect the power plug and contact the LG Electronics Customer Information Centre.
••Under certain conditions, hydrogen gas may be produced in a hot-water system that has not been used for two weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot-water system has not been used for such a period, before using the appliance turn on all hot water tap and let the water flow from each for several minutes. This will release any accumulated hydrogen gas. As the gas is flammable, do not smoke or use an open flame during this time.
6
EN
••Keep the area underneath and around your appliances free of combustible materials such as lint, paper, rags, chemicals, etc.
••Some dishwasher detergents are strongly alkaline. They can be extremely dangerous if swallowed. Avoid contact with the skin and eyes and keep children away from the dishwasher when the door is open. Check that the detergent receptacle is empty after completion of the wash cycle.
••Do not operate the appliance unless all enclosure panels are properly in place.
••Use only detergents or wetting agents recommended for use in a appliance and keep them out of the reach of children.
••Do not wash and dry articles that have been soaked in explosive substances such as gasoline, solvents, solvent-based detergent.
••When loading items to be washed:
−−Locate sharp items so that they are not likely to damage the door seal.
−−Load sharp knives with the handles up to reduce the risk of cut-type injuries.
••Do not wash plastic items unless they are marked "dishwasher safe" or the equivalent. For plastic items not so marked, check the manufacturer’s recommendations.
••Do not touch any heating element (where it is exposed) during or immediately after use.
••Do not abuse, sit on, or stand on the door or dish rack of the dishwasher.
••After cleaning the dishes, turn off the tap. Turn on the tap again and check the connection status of water supply hose before cleaning.
••Do not open the door while the appliance is in operation. Water will splash out and could cause a slipping hazard.
••Be careful not to catch your hand when closing the door of the appliance.
••Do not wash and dry articles that have been soaked in explosive substances such as gasoline, solvents, solvent-based detergent.
7
EN
••Do not come into contact with any fitted steam outlet.
••Small parts, such as rack clips and filter retaining posts can be a choke hazard to small children if removed from the dishwasher. Keep out of reach of small children.
••Knives and other utensils with sharp points must be loaded in the basket with their points down or placed in a horizontal position.
••The door should not be left in the open position since this could present a tripping hazard.
Maintenance
••Never unplug the appliance by pulling on the power cable. Always grip the power plug firmly and pull straight out from the socket outlet.
••Securely plug the power plug in the socket outlet after completely removing any moisture and dust.
••Do not spray water inside or outside the appliance to clean it.
••Disconnect the appliance from the power supply before cleaning the appliance. Setting the controls to the OFF or stand by position does not disconnect this appliance from the power supply.
Disposal
••Before discarding an old appliance, unplug it. Cut off the cable directly behind the appliance to prevent misuse.
••Dispose of all packaging materials (such as plastic bags and styrofoam) away from children. The packaging materials can cause suffocation.
••Remove the door before disposing of or discarding this appliance to avoid the danger of children or small animals getting trapped inside.
8
EN
CAUTION
To reduce the risk of fire, electric shock, or injury to persons when using your product, basic safety precautions should be followed, including the following:
Installation
••Install the product on a firm and level floor.
••Do not put the drain hose under the dishwasher during installation.
Operation
••Turn off the water tap and unplug the appliance if the appliance is to be left for an extended period of time, such as during vacations.
••Do not place objects on the top of the appliance.
••Do not wipe or coat the surface of the product with liquid detergent or bleach (chlorine bleach, oxygen bleach, etc). Failure to follow these instructions may result in corrosion or discoloration of the coating.
••Do not touch water draining from the machine as it may be hot.
••If the drain hose and the water supply hose are frozen in winter, defrost before using.
••Do not put hands, feet, or metal objects below or behind the appliance.
••Do not wash dishes stained with chemical products such as oil, cream or lotions used in a massage parlor, skin care shop, beauty shop or barber shop.
9
INSTALLATION
EN
Specifications
1 |
|
1 |
Control Panel & Door Handle |
|
|
2 |
Front Cover |
||
|
5 |
|||
|
3 |
Lower Cover |
||
|
6 |
4 |
Leveling Feet |
|
2 |
5 |
Drain Hose |
||
|
||||
|
|
6 |
Water Supply Hose |
|
|
|
7 |
Power Cord |
|
3 |
7 |
|
|
|
|
4 |
|
|
|
|
|
1 |
Top Wash Impeller |
1 |
|
|
2 |
Upper Spray Arm |
|
|
|
3 |
Lower Spray Arm |
|
2 |
|
4 |
Salt Container Cap |
|
|
5 |
Filtration System |
|
|
|
8 |
||
|
|
6 |
Cutlery Basket |
|
|
|
9 |
||
3 |
|
|
(On Some Models) |
|
|
|
7 |
Detergent and Rinse Aid |
|
4 |
|
|
||
|
|
|
Dispenser |
|
5 |
|
|
8 |
Cutlery Rack |
6 |
|
10 |
|
(On Some Models) |
|
9 |
Upper Rack |
||
|
|
11 |
||
|
|
10 |
Lower Rack |
|
|
|
|
||
|
|
|
11 |
Steam Nozzle (Steam Models) |
7 |
|
|
|
|
••Power supply: 220-240 V~ 50 Hz
••Size: 600 mm (W) X 600 mm (D) X 850 mm (H)
••Product weight: XD74* –48 kg, XD77* –49 kg, XD88**/XD89**/XD90** –52 kg
••Max. capacity: XD74* / XD77* / XD88** / XD89** / XD90** – 14 place settings
••Water feed pressure: 0.05 – 0.6 Mpa
••Power consumption: 1600 – 1800 W
••Appearance and specification is may vary without notice to improve the quality of the appliance.
10
EN
Accessories (On Some Models)
Funnel |
White Noise Strip (Front) |
Black Noise Strip |
White Noise Strips (Side) |
(All models) |
|
(Lower) |
|
Cover Felt |
Moisture Barrier Tape |
|
(Aluminum Tape) |
Preparing Cabinet Opening
Min. 600 mm |
|
100 mm |
75 mm |
820 |
- 870 mm |
600 - 605 mm |
|
••Cut out for hoses and electrical cables on either side. (Approximately 100 mm X 75 mm)
••Select a location as close to the sink as possible for ease of connection to the water and drain pipes.
••To ensure drainage, the appliance should not be installed more than 1 meter away from the sink.
••If the appliance is installed in a corner, allow minimum clearance of at least 50 mm between the appliance and an adjacent cabinet or wall.
••Before sliding the appliance into the installation opening, all necessary height and height adjustments should be made using a spanner.
CAUTION
••Any bare wood surrounding the appliance should be sealed with a waterproof paint or sealant to prevent it from swelling.
••Slide the dishwasher into the cabinet, opening carefully. Make sure that the drain hose behind the machine and inside the cabinet is not kinked or stretched.
NOTE
••This installation must be conducted by qualified service personnel to ensure it has been installed correctly.
••Do not pull or lift the appliance using the handle; dosing so can damage the door and hinges. Open the door and grab the body frame and the top front opening of the tub to move or lift the appliance.
••Do not push the door of the dishwasher with knees.
11
Attaching the Strip to the Appliance Base
To reduce noise attach the strip to the appliance base.
1 |
Lay down the appliance and pull on both |
|
the hooks at the bottom of the lower cover. |
EN
4 Remove the double-sided tape from the lower and front strips.
5 |
Attach the black coloured lower strip to the |
|
bottom of the lower cover. |
Black lower strip
2 Pull on the lower cover to remove it.
6 |
Attach the white coloured front strip to the |
|
top of the lower cover. |
••The length of the front strip is longer than the lower cover. Attach the front strip so that the overhang is equal on both sides of the lower cover.
3 |
Remove the double-sided tape on the back |
|
of the felt and attach it to the front side of |
the appliance's bottom.
|
White front strip |
7 |
Attach the lower cover with the strip onto |
|
the appliance. |
12
Attaching the Strip to the Appliance side cabinet
To reduce noise attach the strip to the appliance sides, if the opening space allows.
1 |
Remove the double-side tape from the side |
|
strips. |
2 |
Attach the side strip to the front of the side |
||||
|
cabinet and then push down the side strip |
||||
|
so that the side strip adheres well to the |
||||
|
cabinet. |
||||
|
|
|
|
|
|
|
|
|
|
|
|
View A-A'
3 |
|
|
|
Repeat the above steps for attaching the |
|||
|
opposite side strip to the opposite side |
cabinet.
EN
Removing the Top Cover
If the height of the opening is below 850 mm, follow these instructions.
1 Remove the 2 screws on the back.
2 |
Pull the top cover backwards after removing |
|
the two screws and then lift it up to remove |
|
it. |
3 |
Remove the locating pins on the top by |
|
using a Phillips screw driver. |
NOTE
••When the appliance is correctly leveled, there should be no slant, stickiness or rubbing sound when the door is opened.
13
Installing Moisture Barrier Tape (On Some Models)
When the appliance is installed without the top cover, the counter top underside may be damaged by steam or condensation when the door is opened.
Install the moisture barrier tape to the underside of counter top to protect the counter top from condensation when the appliance opened.
1 |
Clean and dry the underside of the counter |
|
top on which the tape will be attached. |
EN
Levelling the Appliance
Levelling the appliance prevents unnecessary leakage and poor washing. Place the appliance on a solid, level floor. Do not install the appliance on an elevated surface.
If the appliance is not properly level, adjust all levelling feet as necessary.
Turn them clockwise to raise and counterclockwise to lower until the appliance no longer wobbles, both front-to-back and side-to-side and corner-to-corner.
Levelling feet |
Levelling feet |
|
NOTE
2 Remove the protective film from the tape.
••The appliance is not level if there is a rubbing sound or stickiness when the door is opened.
3 |
Install the tape to the underside of the |
|
counter top. |
NOTE
••Moisture barrier tape is included in the manual assembly bag.
••If the counter top is made of grinite or waterproof materials, the moisture barrier tape is not required.
••Condensation may occur on the underside or along the front edge of the counter top when the room temperature is low.
14
Case 1. The Door is Slanted to the Right
1 Unscrew (counter-clockwise) the rear left leg and correct the level.
2 |
Check the opening of door and repeat if |
|
necessary until the door opens and closes |
properly.
Slant to the right
Case 2. The Door is Slanted to the Left
1 Unscrew (counter-clockwise) the rear right leg and correct the level.
2 |
Check the opening of door and repeat if |
|
necessary until the door opens and closes |
properly.
Slant to the left
EN
Installing the Drain Hose
If the end of the drain hose does not fit to the drain line, use a drain extension kit (optional) that is resistant to heat and detergent.
This should be available from a plumbing shop or a hardware store.
Connection to the Waste Spigot
Check the waste spigot when initially installing. An OE error can occur when the waste spigot below the sink is not drilled out properly. To connect the drain hose, drill out at least a 15 mm diameter hole in the waste spigot before connecting and securing.
Waste spigot
CAUTION
••Make sure that plastic debris is not remaining inside of spigot after it has been drilled out.
••Do not attempt to open the waste hole with a screwdriver and hammer. this will induce debris to become stuck and cause a malfunction.
••Caution should be taken when passing hoses through Cabinetry holes as they may have sharp edges and could damage the hoses. Smooth or sand edges to avoid damaging the drain or inlet hose.
••Make sure that the line is not kinked or sharply bent.
15
To prevent siphoning, one of the following methods must be used.
Method 1
When the drain hose is connected to a waste spigot, the hose must be looped up to the underside of the bench top and secured.
Bench top
<![if ! IE]> <![endif]>Min. |
<![if ! IE]> <![endif]>– 1000 mm |
<![if ! IE]> <![endif]>300 mm |
<![if ! IE]> <![endif]>770 mm |
Method 2
When the drain hose is connected to a separate standpipe, it is essential that an airtight connection be made. If not, it can induce odors.
|
|
Air Tight |
|
|
|
|
|
||
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|||
|
<![if ! IE]> <![endif]>1000 mm Max. |
Connection |
|
|
|
|
|
||
<![if ! IE]> <![endif]>700 mm Min. |
|
|
|
|
|
|
|
||
|
<![if ! IE]> <![endif]>Min. |
|
|
|
|
|
|
||
|
|
|
<![if ! IE]> <![endif]>300 mm |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Standpipe 40 mm diametre Min.
EN
Connecting the Water Supply Hose
Connect the water supply hose to the water tap.
Water tap
Water supply hose
WARNING
••Do not shorten or damage the water supply hose as it contains electrical wires and components. It can not be detached or removed from the appliance for installation purposes.
••It is important that the water supply hose not be tampered with, cut, disassembled, pulled, or kinked. It contains electrical wiring inside and if damaged, can cause an electrical hazard.
CAUTION
••This appliance may be fed with either hot or cold water. If the water connection can not be maintained below 65ºC, the appliance must be connected to cold water.
••Use sealant tape or sealing compound on the tap's thread to avoid water leaks.
••Make sure that the line is not kinked or sharply bent.
NOTE
••Before connecting the water supply hose to the tap, turn on the tap to flush out foreign substances (dirt, sand or sawdust) in the water lines. Let water drain into a bucket.
••It takes about 3 – 4 minitues for the first supply water.
16
Preparing Electrical Wiring
Connect the appliance to an earthed socket in accordance with the current wiring regulations, protected by a minimum 15 amp circuit breaker or time delay fuse.
Wiring must be two wires with earth.
The power cord should not be positioned behind the appliance but within 1.2 meters of the side so that the plug is easily accessible.
WARNING
••For personal safety, remove house fuse or open circuit breaker or switch off power plug before installation.
••Do not use an extension cord or double adapter.
••The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
••Repairs to the appliance must only be carried out by qualified service personnel. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Contact our local service centre.
••Connect to a properly rated, protected, and sized power circuit to avoid electrical overload.
EN
Final Check
1 Turn on electrical power.
2 |
Turn on house water supply. |
3 |
The door should open and close smoothly |
|
and without harsh noises, if the unit has |
|
been leveled correctly. |
4 |
Run the appliance on a Rinse cycle to verify |
|
proper operation and check for leaks. |
|
|
Error Code Possible Cause and Solution |
|
|
Drain hose kinked or pinched. |
Feed the drainage and supply hoses through the hole under the sink. Then gradually slide the dishwasher into the cabinet while pulling on the hoses under the
sink to take up any slack. This OE Error helps avoid kinking the hoses or
trapping them beneath the dishwasher.
Waste spigot under sink is clogged.
Drill out the waste spigot under the sink.
Water supply line kinked under dishwasher.
Feed the drainage and supply hoses through the hole under the sink. Then gradually slide the dishwasher into the cabinet while pulling on the hoses under the
IE Error sink to take up any slack. This helps avoid kinking the hoses or
trapping them beneath the dishwasher.
House water supply not turned on.
Turn water on. Water pressure may be too high or too low.
17