LG XC-62-A0U User Manual

LGETT_XC62_ENG_MFL38289202

MICRO Hi-Fi SYSTEM

OWNER’S MANUAL

MODEL: XC62

XC62-A0U/D0U/X0U

XCS62F

Before connecting, operating or adjusting this product, please read this instruction booklet carefully and completely.

USB

Safety Precaution

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK

OF ELECTRIC SHOCK

DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

CAUTION: The apparatus should not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, should be placed on the apparatus.

CAUTION concerning the Power Cord

Most appliances recommend they be placed upon a dedicated circuit;

That is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain.

Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer.

Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance.

To disconnect power from the mains, pull out the mains cord plug. When installing the product, ensure that the plug is easily accessible.

WARNING: Do not install this equipment in a confined space such as a book case or similar unit.

CAUTION: Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.

Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from over heating.

The openings should be never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instruction has been adhered to.

CAUTION:

This product employs a Laser System.

To ensure proper use of this product, please read this owner’s manual carefully and retain it for future reference. Should the unit require maintenance, contact an authorized service center. Use of controls, adjustments or the performance of procedures other than those specified herein may result in hazardous radiation exposure.

To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM.

POWER SAVE MODE

You can set up the unit into an economic power save mode. In the power-on status, press and hold POWER (1/]) for about

3seconds.

-Nothing is displayed on display window when the unit goes into the power save mode.

To cancel power save mode, press POWER (1/]).

2

Before use
Contents
Before use
About the symbols for instruction . . . . . . . .	3
Notes on Discs . . . . . . . . . . . . . . . . . . . . . .	3
Notes on Tapes . . . . . . . . . . . . . . . . . . . . . .	3
Front / Back Panel . . . . . . . . . . . . . . . . . . . .	4
Remote Control . . . . . . . . . . . . . . . . . . . . . .	5
Connection

Speaker System Connection . . . . . . . . . . . .6

Antenna (Aerial) Connection . . . . . . . . . . . .6

Auxiliary Function . . . . . . . . . . . . . . . . . . . .6

Operation

Basic Operation . . . . . . . . . . . . . . . . . . . . . .7

Sound Adjustment . . . . . . . . . . . . . . . . . . . .7

Advanced Setting . . . . . . . . . . . . . . . . . . .7-8

USB Function . . . . . . . . . . . . . . . . . . . . . . . .8-9

TAPE Function . . . . . . . . . . . . . . . . . . . . . . .9

RADIO Function . . . . . . . . . . . . . . . . . .10-11

PORTABLE Function . . . . . . . . . . . . . . . . . . .11

CD Function . . . . . . . . . . . . . . . . . . . . . . . .12

Reference

Troubleshooting . . . . . . . . . . . . . . . . . . . . .13

About MP3/WMA . . . . . . . . . . . . . . . . . . . .13

Specifications . . . . . . . . . . . . . . . . . . . . . .14

About the symbols for instruction

Indicates hazards likely to cause harm to the unit itself or other material damage.

Indicates special notes and operating

Note features.

Notes on Discs

Handling discs

Do not touch the playback side of the disc. Hold the disc by the edges so that fingerprints do not get on the surface. Never stick paper or tape on the disc.

Storing discs

After playing, store the disc in its case. Do not expose the disc to direct sunlight or sources of heat and never leave it in a parked car exposed to direct sunlight.

Cleaning discs

Fingerprints and dust on the disc can cause poor picture quality and sound distortion. Before playing, clean the disc with a clean cloth. Wipe the disc from the center outward.

Do not use strong solvents such as alcohol, benzine, thinner, commercially available cleaners, or anti-static spray intended for older vinyl records.

Notes on Tapes

Preventing record

Removing the tab(s) of the cassette (with a small screwdriver) will prevent accidental erasure.

Side A

Tab for side A

Tab for side B

To record again, cover the hole of the tab with an adhesive tape.

Adhesive tape

Before use

3

Front / Back Panel

	1	13
	2	12
	3	11
	4	10 14		17
		9
	5		15
		8
	6
		7
			16

1.	DISPLAY WINDOW			7.	Z PUSH EJECT position
2. 1/] (POWER)				8.	(USB connector)
3. bB/[] PLAY(PAUSE)				9.	• M (CD SKIP/SEARCH)
4.	• m (CD SKIP/SEARCH)				(FAST FORWARD PLAY)
			(FAST REWIND PLAY)		• TUNE.+
	• TUNE.-			10.	VOLUME CONTROL KNOB
5.	• PORT.IN jack			11. x STOP
	•		(Headphone jack) : 3.5mm	12.	• TIMER
6.	• FUNCTION				• CLOCK
	(FM, AM, CD, USB, AUX, PORTABLE, TAPE)				• SET (RDS - OPTIONAL)
	• XDSS plus			13.	DISC TRAY
	• PLAY MODE			14.	AM/FM ANTENNA TERMINAL
	ST./MONO			15.	AUX IN (AUXILIARY INPUT) connector
	• CD SYNC			16.	POWER IN (POWER CORD)
	• Z CD OPEN (DEMO)			17.	SPEAKER TERMINAL

4

Remote Control

POWER

PRESET/FOLDER(/ )

SLEEP

CD FUNCTION B/[] (PLAY/PAUSE) • x (CD STOP) •

.bb/BB>(CD SKIP/SEARCH)• TUN.-/+ • REPEAT •

D.SKIP

XTS Pro •

XDSS plus •

EQ master •

RDS (Radio Data System) FUNCTION RDS : OPTIONAL • PTY : OPTIONAL •

PTY SEARCH : OPTIONAL •

DIMMER

MUTE

• USB

• FUNCTION

VOLUME (/ )

CLOCK

PROGRAM/MEMO

TAPE FUNCTION • b (BACKWARD PLAY)

• B (FORWARD PLAY)

• m (FAST REWIND PLAY)

• M (FAST FORWARD PLAY)

• z/[] (RECORD/RECORD PAUSE)

• x (TAPE STOP)

RANDOM

MP3 Info

(MP3/WMA file information display)

NUMERIC

Remote Control battery installation

		Detach the battery cover on
		the rear of the remote control,
		and insert two R03 (size AAA)
AAA	AAA	batteries with 3 and #
		aligned correctly.

3#

Caution

:Do not mix old and new batteries. Never mix different types of batteries (standard,

alkaline, etc.).

Remote Control Operation Range

Point the remote control at the remote sensor and press the buttons.

• Distance : About 23 ft (7 m) from the front of the remote sensor.

• Angle : About 30° in each direction of the front of the remote sensor.

Before use

5