LG WT7155CW Product Specifications

HOME APPLIANCES
LG LAUNDRYLG LAUNDRY
WT7155CW
4.8 cu. ft. Top Load Washer with 4-Way™ Agitator & TurboDrum™ Technology
4-Way™ Agitator
TurboDrum™ Technology
6Motion™ Technology
KE Y FEAT UR ES
SmartDiagnosis™
Deep Fill Option
ColdWash™ Technology
NeveRust™ Stainless Steel Tub
Direct Drive Motor 10-Year Limited Warranty
ENERGY STAR® Certied
AVAILABLE COLORS
wh i te
SUMMARY
Typ e Top Load Wash er
Capacity (cu.ft.) 4.8 cu. f t.
Matching Electric Dryer DLE7150W
Matching Gas Dryer DL G7151 W
Color White (W)
PRODUCT FEATURES
IMPELLER/Agitator
Agitator Yes
APPEARANCE
Intelligent Electronic Controls with Dual LED Display
Touch Buttons Yes
Electronic Control Panel with LED Display
Dial-A-Cycle™ Yes
ENERGY
IMEF 1.57
IWF 6.5
WASH PROGRAMS
No. of Pro grams 8
Wash Programs
Yes
Yes
Normal , Heavy Duty, Deep Wash, Waterproof, Bedding, Delicates, Speed Wa sh, Tub Clean
WASH OPTIONS
No. of Opt ions 9
Options
No. of Wash/Rinse Temps 3
Wash/Rinse Temps Hot, War m, Cold
No. of Spin S peeds 3
Spin Speeds High, Medium, Low
No. of Water Levels Load Sensing
No. of Soil Level s 3
FABRIC CARE FEATURES
ColdWash™ Option Yes
CONVENIENCE FEATURES
SlamProof™ Lid Ye s
TrueBalance™ Anti-Vibration System
SmartDiagnosis™ Yes
3-Tray Dispenser Yes
LoadSense Yes
Status Indicator(s) Yes
End of Cycle Si gnal Yes
Control Lock Yes
Auto Suds Removal Yes
Forced Dr ain System Yes
Add Garment Indicator Yes
Leveling Legs Yes
ColdWash™, Signal , Delay Wash, Rinse+Spin, Deep Fill , Max, Extr a Rinse, Control Lock, Spin Only
Yes
MOTOR AND AGITATOR
Motor Type Inverter Direct Drive Motor
Max RPM 800
Axis Vertical
MATERIALS AND FINISHES
NeveRust™ Stainless Steel Drum Yes
Cabinet Painted Steel
All Available Colors White (W)
Lid White - Transparen t Glass
POWER SOURCE
Ratings CSA Lis ted
Electrical Requirements 120V @ 60Hz.
DIMENSIONS
Product (WxHxD)
Carton (WxHxD) 29 19/32" x 46 3/8" x 31 3/8"
Weight (Product) 127. 9 lb s
Weight (Carton) 147 l bs
LIMITED WARRANTY
Part s and Labor 1 Year
Direc t Drive Motor 10 Ye ars
Drum 3 Yea rs
UPC CODE S
WT7155CW (White) 1951740 2670 0
DLE7150W (White) 048231028448
DLG7151W (White) 048 231028455
27" x 44 1/2" x 28 3/8" (57 1/5" H with lid open)
© 2021 LG Electr onics USA, In c. All right s reserve d. "LG Life’s Good " is a registere d trademar k of LG Corp. All ot her produc t and brand nam es are tradem arks or regi stered tra demarks of t heir respec tive owner s. Design, fe atures and sp ecificat ions are subje ct to change w ithout not ice. Non-met ric weights a nd measurem ents are app roximate. So me features m ay require Int ernet access . Content and s ervices ma y vary by prod uct and are su bject to chan ge without n otice. 11/15/21
HOME APPLIANCES
Drain Hose
LG LAUNDRY
WT7
155CW
4.8 cu. ft. Top Load Washer with 4-Way™ Agitator & TurboDrum™ Technology
DIMENSIONS AND CLEARANCES
4"
3-1/2"
QUICK INSTALL & CLEARANCES
For full installation directions/clearances please refer to the corresponding User Manual and Installation Guide.
IMPORTANT
DIMENSIONS/CLEARANCES/WEIGHTS
A Width 27"
B Height 44 1/2"
C Depth 28 3/8"
D Heigh t with lid open 57 1/5"
Carton Dimensions (WxHxD) 29 19/32” x 46 3/8” x 31 3/8”
ENERGY / R ATINGS
IMEF 1.57
IWF 6.5
Ratings CSA Lis ted
Electrical Requirements 120V @ 60Hz.
ELECTRICAL REQUIREMENTS
The washer should be plugged into a 120-VAC, 60-Hz grounded 3-prong outlet.
Plug in the washer. Improper connection of the equipment-grounding conductor
can result in risk of electric shock. Check with a qualied electrician or service
technician if you are in doubt as to whether the appliance is properly grounded.
Do not modify the plug provided with the appliance. If it does not t the outlet, have a proper outlet installed by a qualied electrician. Failure to follow these warnings can cause serious injury, re, electrical shock, or death.
The power outlet must be within 60 inches (1.5 m) of either side of the washer.
The appliance and outlet must be positioned so that the plug is easily accessible.
Do not overload the outlet with more than one appliance.
The outlet must be grounded in accordance with current wiring codes and
regulations.
Time-delay fuse or circuit breaker is recommended.
It is the personal responsibility and obligation of the product owner to have a
proper outlet installed by a qualied electrician.
D
B
C
1" 1"
To ensure sufcient clearance for water lines and airow, allow minimum clearances
of at least 1 in. (2.5 cm) at the sides and 4 in. (10 cm) behind the unit. Be sure to
allow for wall, door, or oor moldings that may increase the required clearances.
CONNECTING THE WATER LINES
LG recommends the use of LG hoses. Any leaking,
property damage, or damage to the washing machine caused by an improper installation or by the use of non-LG hoses is not covered under the terms of the LG warranty and is the sole responsibility of the customer and/or an installer.
Water supply pressure must be between 20 psi and
120 psi (138~827 kPa). If the water supply pressure is more than 120 psi, a pressure reducing valve must be installed.
Inspect the threaded tting on each hose and make
sure there is a rubber seal in place in both ends of each hose.
Connect the water supply hoses to the HOT and COLD
water faucets tightly by hand and then tighten another 2/3 turn with pliers.
Always run a gallon or two of water through each inlet
hose to ush dirt, scale and other debris out of the
water lines. Doing so will help prevent future problems
with clogged lter screens, and will also allow you to
verify which water line is hot and which is cold. Attach the hot water line to the hot water inlet on the
back of the washer. Attach the cold water line to the cold water inlet on the back of the washer. Tighten the
ttings securely. Turn ON both faucets all the way and
check for leaks at both ends of the hoses.
A
Rubber Seal
Water Hose (to water inlet on washer)
4"
Rubber Seal
Water Hose (to tap)
Water Faucet
Hot water inlet
Cold water inlet
CONNECTING THE DRAIN HOSE
The drain hose should always be
properly secured. Failure to properly secure the drain hose can result in
ooding and property damage.
The drain must be installed in
accordance with any applicable local codes and regulations.
Make sure that the drain hose is not
stretched, pinched, crushed, or kinked. Normal height of the end of the hose
should be approximately 35”~47”
(0.9~1.2 m) from the oor.
Do not install the end of the drain
hose lower than 29 in. (73.7 cm) or higher than 96 in. (243.8 cm) above the bottom of the washer or more than 60 in. (152.4 cm) away from the washer.
Never create an airtight seal between
the hose and the drain with tape or other means. If no air gap is present, water can be siphoned out of the tub resulting in poor wash/rinse performance or clothing damage.
© 2021 LG Electronics USA, Inc. All rights reserved. "LG Life’s Good" is a registered trademark of LG Corp. All other product and brand names are trademarks or registered trademarks of their respective owners. Design, features and specifications are subject to change without notice. Non-metric weights and measurements are approximate. Some features may require Internet access. Content and services may vary by product and are subject to change without notice. 11/15/21
8”(20 cm)
Tie Strap
STANDPIPE Option
Do not insert the end of
the drain hose into the standpipe more than 8 inches (20cm). Doing so
can cause siphoning, odors, or improper draining.
39”
(99 cm)
39”
(99 cm)
Tie Strap
LAUNDRY TUB Option
Do not use this drain
hose with a oor drain.
The end of the drain hose must be at least 29 inches
above the oor for proper
draining to occur.
Tie Strap
Loading...