LG WT5101HV Owner's Manual
MFL42065494
RELEASING THIS DRAWING
WITHOUT PERMISSION LG
Electronics SHOULD BE
ACCUSED ACCORDING TO THE
LAWS AND COMPANY RULES.
이 도면은 LG전자의 자산으로 불법
유출시 관계법과 회사규정에 의해 처벌됨.
210
WORK
94
SEC.
가
BRAND
LG
<FRONT> <BACK>
가
나
MODEL
WT5101HV
다
P/NO.
MFL42065494
PRINTING DEGREE
EXTERIER INTERIER
1
1
SNOW WHITE 100g OFFSET 인쇄
MATERIAL AND PRINTING DESCRIPTION
<< 주기 >>
1. 재질 : 모조지 100g
2. 인쇄 작업
1) G/S(LG) BRAND(FIG1): * 표지 - 1도 : LG RED PANTONE #207
2) OEM BRAND(FIG2) : * 표지 - 1도 : BLACK
* 내지 - 1도 : BLACK
3. 문자의 크기 및 형상은 주어진 FILM에 준한다.
4. 책자의 크기는 일반적 규격(국판)에 준한다.
5. 양산 전에 설계 한도를 득할것.
6. 유해물질 관리 기준
:본 부품에 금지물질이 포함되지 않도록 하고, 상세내용은 LG(63)-A-5501-34를
만족할 것.
LG MODEL 명
SUFFIX
T1309ADFH6 ASSELAT
- 2도 : LG GRAY PANTONE #430
* 내지 -1도 : BLACK
LANGUAGE
ENG+SPA
PAGE
72
REMARK
ROCKY
1
2
3
4
REV. NO.
기호
REVISION DESCRIPTION
변경 사항
나
P/NO. 다
150 150
APPROVED
REF. NO.
시방 번호
년/월/일
DATE
PREPARED
시방자
승인자
<< NOTES >>
1. Material : Vellum paper
2. Print work
1) G/S(LG) BRAND(FIG1) : * Cover - First color : LG Red Pantone #207
- Second color : LG GRAY PANTONE #430
* Inside - First color : Black
2) OEM BRAND(FIG2) : * Cover - First color : Black
* Inside - First color : Black
3. Printing, text size and line are based on LG designg film.
4. Size will Follow the standard.
5. Before product controlled by criteria sample.
6. Standard of supervision for hazardous material
: The part should not contain prohibited substances(Pb,Cd,Hg,Cr+6,PBB,PBDE)
and details should comply with LG standard of LG(63)-A-5501-34.
TRIG.
MODELING
LG 전자 (주)
LG Electronics Inc.
권 다 영
11.01.20
UNIT SCALE
REVIEWEDDESIGNED
mm
CHECKED APPROVED
김 종 길
11.01.21
RELATED DWG.
1
배 종 득
11.01.22
1
T
I
T
L
E
DWG.
No.
MANUAL,OWNER’S
ROCKY 1/1
MFL42065494
PDF
ILLUSTRATOR
DR COMPLETED
도면 DR 완료
완료일 : 11.01.24
ENGLISH
ESPAÑOL
OWNER’S MANUAL
WASHING MACHING
Please read this manual carefully before operating
your washing machine and retain it for future reference.
WT5101HV
P/No.: MFL42065494
www.lg.com
2
INTRODUCTION
IMPORTANT SAFETY INSTRUCTIONS
Basic safety precautions .....................................3-4
Grounding instructions ........................................... 4
Safety instructions for installation .......................... 5
Safety instructions for use, care and cleaning,
and disposal ........................................................... 6
THANK YOU!
Congratulations on your purchase
PARTS AND FEATURES
Special Features ..................................................... 7
Key Parts and Components ................................... 8
INSTALLATION INSTRUCTIONS
Choose the Proper Location ..................................9
Flooring .................................................................. 9
Clearances.............................................................. 9
Unpack the Washer .............................................. 10
Connecting the Water Lines ................................. 11
Connecting the Drain Line ............................... 11-12
Leveling the Washer ............................................ 12
Connect to the Power Supply .............................. 12
HOW TO USE
Control Panel Features ......................................... 1 3
Operating the Washer........................................... 1 4
Cycle Guide .......................................................... 15
Sorting Wash Loads ............................................. 1 6
About the Dispenser ............................................. 1 7
Loading the Dispenser ......................................... 1 8
The LED Display ................................................... 19
Cycle Modifier Buttons ................................... 20-21
Cycle Option Buttons .................................... 22-23
CARE AND CLEANING
Regular Cleaning ............................................ 24-25
Maintenance ......................................................... 2 5
Cleaning the Washer ............................................ 2 6
TROUBLESHOOTING
Normal Sounds You May Hear .............................27
Before Calling for Service ............................... 27-31
SmartDiagnosis™................................................. 32
and welcome to the LG family.
Your new LG washing machine
combines the most advanced
washing technology with simple
operation and high efficiency.
Follow the operating and care
instructions in this manual, and your
washer will provide many years of
reliable service.
SPECIFICATION
Specification ......................................................... 3 3
3
ENGLISH
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
wWARNING For your safety, the information in this manual must be
followed to minimize the risk of fire or explosion, electric shock, or to prevent
property damage, personal injury, or loss of life.
We have provided many important safety messages in this manual and on your appliance. Always read
and obey all safety messages.
This is the safety alert symbol.
w
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word DANGER or WARNING.
These words mean:
wDANGER: You can be killed or seriously injured if you don’t immediately follow instructions.
wWARNING: You can be killed or seriously injured if you don’t follow instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of
injury, and tell you what can happen if the instructions are not followed.
Your safety and the safety of others is very important.
4
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
wWARNING For your safety, the information in this manual must be
followed to minimize the risk of fire or explosion, electric shock, or to prevent
property damage, personal injury, or loss of life.
BASIC SAFETY PRECAUTIONS
wWARNING: To reduce the risk of fire, electric shock, or personal injury when using
this appliance, follow basic precautions, including the following.
• Before use, the washer must be properly installed as
described in this manual.
• Do not wash articles that have been previously
cleaned in, washed in, soaked in, or spotted with
gasoline, dry cleaning solvents, or other flammable or
explosive substances, as they give off vapors that could
ignite or explode.
• Do not add gasoline, dry cleaning solvents, or other
flammable or explosive substances to the wash water.
These substances give off vapors that could ignite or
explode.
• Under certain conditions, hydrogen gas may be
produced in a hot water system that has not been used
for 2 weeks or more. HYDROGEN GAS IS EXPLOSIVE.
If the hot water system has not been used for such a
period, before using the washer, turn on all hot water
faucets and let the water flow from each for several
minutes. This will release any accumulated hydrogen
gas. As the gas is flammable, do not smoke or use an
open flame during this time.
• Do not allow children to play on or in the washer. Close
supervision of children is necessary when the washer is
used near children.
• Before the washer is removed from service or
discarded, remove the lid to prevent children from
climbing inside.
• Do not install or store the washer where it will be
exposed to the weather or freezing temperatures.
• Do not tamper with controls.
• Do not repair or replace any part of the washer or
attempt any servicing other than as described in this
manual. We strongly recommend that any service be
performed by a qualified individual.
• See Installation Instructions for grounding
requirements.
• ALWAYS follow the fabric care instructions
supplied by the garment manufacturer.
• Do not place items exposed to cooking oil in your
washer. Items contaminated with cooking oils may
contribute to a chemical reaction that could cause a
load to catch fire.
• Use fabric softeners or products to eliminate static only
as recommended by the manufacturer.
• This washer is not designed for maritime use or for
mobile installations such as in RVs, aircraft, etc.
• Turn off the water taps and unplug the washer if the
machine is to be left for an extended period of time,
such as during vacations.
• Packaging material can be dangerous for children.
There is a risk of suffocation! Keep all packaging from
children.
• Always check the inside of the washer for foreign
objects before loading laundry. Keep the lid closed
when not in use.
• Do not reach into the washer while parts are moving.
GROUNDING INSTRUCTIONS
This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce
the risk of electric shock by providing a path of least resistance for electric current. This appliance is
equipped with a cord having an equipment-grounding conductor and grounding plug. The plug must
be plugged into an appropriate outlet that is properly installed and grounded in accordance with all
local codes and ordinances.
wWARNING:
of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the appliance is properly grounded. Do not modify the plug provided with the appliance. If it does not fit the outlet, have
a proper outlet installed by a qualified electrician. Failure to follow these warnings can cause serious injury, fire,
electrical shock, or death.
Improper connection of the equipment-grounding conductor can result in risk
5
ENGLISH
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
wWARNING For your safety, the information in this manual must be
followed to minimize the risk of fire or explosion, electric shock, or to prevent
property damage, personal injury, or loss of life.
SAFETY INSTRUCTIONS FOR INSTALLATION
wWARNING: To reduce the risk of fire, electric shock, or personal injury when using
this appliance, follow basic precautions, including the following.
• Refer to INSTALLATION INSTRUCTIONS for detailed
grounding procedures. Installation instructions are
packed in the washer for installer’s reference. If the washer
is moved to a new location, have it checked and reinstalled
by a qualified service person. Failure to follow this warning
can cause serious injury, fire, electrical shock, or death.
• Do not, under any circumstances cut or remove the
third (ground) prong from the power cord. Failure to
follow this warning can cause serious injury, fire, electrical
shock, or death.
• For personal safety, this appliance must be properly
grounded. Failure to follow this warning can cause serious
injury, fire, electrical shock,
or death.
• The power cord of this appliance is equipped with
a 3-prong (grounding) plug which mates with a
standard 3-prong (grounding) wall outlet to minimize the
possibility of electric shock hazard from this appliance.
• This washer must be plugged into a 120V AC, 60Hz
grounded outlet. Failure to follow this warning can cause
serious injury, fire, electrical shock, or death.
• Have the wall outlet and circuit checked by a qualified
electrician to make sure the outlet is properly
grounded. Failure to follow this warning can cause serious
injury, fire, electrical shock,
or death.
• Where a standard 2-prong wall outlet is encountered, it
is your personal responsibility and obligation to have it
replaced with a properly grounded 3-prong wall outlet.
Failure to follow this warning can cause serious injury, fire,
electrical shock, or death.
• Do not install on carpet. Install washer on a solid floor.
Failure to follow this warning can cause serious leak
damage.
• Do not remove ground prong. Do not use an adapter
or extension cord. Plug into a grounded 3-prong outlet.
Failure to follow these warnings can cause serious injury,
fire, electrical shock, or death.
• The washer should always be plugged into its own
individual electrical outlet which has a voltage rating
that matches the rating plate. This provides the best
performance and also prevents overloading house wiring
circuits which could cause a fire hazard from overheated
wires.
• Never unplug your washer by pulling on the power
cord. Always grip plug firmly and pull straight out from
the outlet. Failure to follow this warning can cause serious
injury, fire, electrical shock, or death.
• Repair or replace immediately all power cords that
have become frayed or otherwise damaged. Do not
use a cord that shows cracks or abrasion damage
along its length or at either end. Failure to follow this
warning can cause serious injury, fire, electrical shock,
or death.
• When installing or moving the washer, be careful not
to pinch, crush, or damage the power cord. Failure to
follow this warning can cause serious injury, fire, electrical
shock, or death.
• The washer must be installed and electrically
grounded by a qualified service person in accordance
with local codes to prevent shock hazard and assure
stability during operation.
• The washer is heavy. Two or more people may be
needed to install and move the appliance. Failure to do
so can result in back or other injury.
• Store and install the washer where it will not be
exposed to temperatures below freezing or exposed
to outdoor weather conditions. Failure to follow this
warning can cause serious leak damage.
• Do not install the washer in humid spaces to reduce
the risk of electric shock. Failure to follow this warning
can cause serious injury, fire, electrical shock, or death.
• To reduce the risk of personal injury, adhere to all
industry recommended safety procedures including the
use of long sleeved gloves and safety glasses. Failure to
follow all of the safety warnings in this manual could result
in property damage, personal injury or death.
6
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
wWARNING
For your safety, the information in this manual must be
followed to minimize the risk of fire or explosion, electric shock, or to prevent
property damage, personal injury, or loss of life.
SAFETY INSTRUCTIONS FOR USE, CARE AND CLEANING, AND DISPOSAL
wWARNING: To reduce the risk of fire, electric shock, or personal injury when using
this appliance, follow basic precautions, including the following.
•
Unplug the washer before cleaning to avoid
the risk of electric shock.
•
Never use harsh chemicals, abrasive
cleaners, or solvents to clean the washer.
They will damage the finish.
•
Do not put oily or greasy rags or clothing on
top of the washer. These substances give off
vapors that could ignite the materials.
•
Do not wash items that are soiled with
vegetable or cooking oil. These items may
contain some oil after laundering. Due to the
remaining oil, the fabric may smoke or catch
fire by itself.
•
Disconnect this appliance from the
power supply before attempting any user
maintenance. Turning the controls to the
OFF position does not disconnect this
appliance from the power supply. Failure to
follow this warning can cause serious injury,
fire, electrical shock, or death.
•
Do not combine laundry products for use in
one load unless specified on the label.
•
Do not mix chlorine bleach with ammonia
or acids such as vinegar. Follow package
directions when using laundry products.
Incorrect usage can produce poisonous gas,
resulting in serious injury or death.
•
Do not reach into the washer while parts
are moving. Before loading, unloading or
adding items, press the START/PAUSE
button and allow the drum to coast to a
complete stop before reaching inside.
Failure to follow this warning can cause
serious injury, fire, electrical shock, or death.
•
Do not allow children to play on or in the
washer. Close supervision of children is
necessary when the washer is used near
children. As children grow, teach them the
proper, safe use of all appliances. Failure
to comply with these warnings could result in
serious personal injuries or death.
•
Destroy the carton, plastic bag and other
packing materials after the washer is
unpacked. Children might use them for play.
Cartons covered with rugs, bedspreads,
or plastic sheets can become airtight
chambers. Failure to comply with these
warnings could result in serious personal
injuries or death.
•
Keep laundry products out of reach of
children. To prevent personal injury, observe
all warnings on product labels. Failure to
comply with these warnings could result in
serious personal injuries.
• Remove the lid to the washing compartment
before your washer is removed from service
or discarded to avoid the danger of children or
small animals getting trapped inside.
to do so can result in serious personal injury
or death.
Failure
SAVE THESE INSTRUCTIONS
7
ENGLISH
PARTS AND FEATURES
D
C
E
F
G
A
B
SPECIAL FEATURES
SMARTRINSE™ WITH JET SPRAY
A
This washer is designed to save rinse water
by using the SMARTRINSE™ with jet spray in
COTTON/NORMAL and HEAVY DUTY cycles.
NOTE: Select FABRIC SOFTENER option or
EXTRA RINSE option, if you use fabric softener
in COTTON/NORMAL and HEAVY DUTY cycles.
B
WATER HEATER
The heater inside washer increases water
temperature and provides better cleaning for
SANITARY and BRIGHT WHITES™ cycle.
C
INVERTER DIRECT DRIVE
Inverter Direct Drive eliminates the belt and
pulleys found on most washers to provide
improved performance and reliability while
increasing energy efficiency.
D
LID LOCK SWITCH
The washer lid is locked during operation. The
lid can be unlocked by pressing the Start/Pause
button to stop the washer.
E
SLAMPROOF™ LID
The SLAMPROOF™ lid is a safety device that
closes the lid slowly. The SLAMPROOF™ lid
keeps the heavy lid from falling and injuring the
user.
F
WAVEFORCE™
Rapidly rotating drum uses centrifugal force and
an angled spray to pull water through the fabric,
resulting in less friction for a gentler and more
thorough cleaning.
G
SMARTDIAGNOSIS™
Should you experience any technical difficulty
with your washing machine, it has the capability
of transmitting data by phone to the Customer
Information Center. The call center agent records
the data transmitted from your machine and
uses it to analyze the issue, providing a fast and
effective diagnosis (refer to page 32).
8
C
E
F
B
A
PARTS AND FEATURES
D
KEY PARTS AND COMPONENTS
In addition to the special features and components
outlined in the Special Features section, there
are several other important components that are
referenced in this manual.
A
ULTRA-CAPACITY STAINLESS STEEL DRUM
The ultra-large stainless steel drum offers extreme
durability.
B
TEMPERED GLASS LID
The tempered glass lid is durable and makes it
easy to see the inside of washer.
C
ROTARY KNOB
Turn this knob to select the desired cycle. Once
the desired cycle has been selected, the standard
presets will be shown in the display. These
settings can be adjusted using the cycle setting
buttons anytime before starting the cycle.
AUTO LEVELING FEET
D
The automatic leveling feet (in the rear) adjust to
improve washer stability on uneven floors.
Drain
Hose
Power
Cord
Hot Water
Inlet valve
Cold Water
Inlet valve
E
REAR CONTROL PANEL WITH LED DISPLAY
The easy-to-read LED display show cycle options,
settings, processing, estimated time remaining
during operation.
F
DETERGENT DISPENSER DRAWER
There are two compartments, one each for main
wash (liquid or powder) and liquid fabric softener.
Included Accessories
• Hot and Cold Water Hoses (with 2 seals per
hose at each ends)
• Tie Strap (for securing drain hose)
9
ENGLISH
INSTALLATION INSTRUCTIONS
68.6 cm
2.5 cm
2.5 cm
115.3 cm
68.6 cm
2.5 cm
2.5 cm
72.1 cm
10 cm
115.3 cm
141.7 cm
(with lid
open)
CHOOSE THE PROPER LOCATION
wWARNING
• The washer is heavy! Two or more people
are required when moving and unpacking
the washer. Failure to do so can result in back or
other injury.
• Store and install the washer where it will not
be exposed to temperatures below freezing or
exposed to outdoor weather conditions. Failure
to follow this warning can cause serious injury, fire,
electrical shock, or death.
• Properly ground washer to conform with all
governing codes and ordinances. Failure to
follow this warning can cause serious injury, fire,
electrical shock, or death.
• To reduce the risk of electric shock, do not
install the washer in humid spaces. Failure to
follow this warning can cause serious injury, fire,
electrical shock, or death.
• The base opening must not be obstructed by
carpeting when the washer is installed on a
carpeted floor.
• Keep the area underneath and around your
appliances free of combustible materials such as
lint, paper, rags, chemicals, etc.
• Do not remove ground prong. Do not use an
adapter or extension cord. Plug into a grounded
3-prong outlet. Failure to follow this warning can
cause serious injury, fire, electrical shock, or death.
POWER OUTLET
• The power outlet must be within 1.5 m of either
side of the washer.
• The appliance and outlet must be positioned so
that the plug is easily accessible.
• Do not overload the outlet with more than one
appliance.
• The outlet must be grounded in accordance with
current wiring codes and regulations.
• Time-delay fuse or circuit breaker is recommended.
NOTE: It is the personal responsibility and
obligation of the product owner to have a
proper outlet installed by a qualified electrician.
NOTE: The washer must be installed on firm
flooring to minimize vibration during the spin cycle.
Concrete flooring is best, but a wood floor is
sufficient, provided it is built to FHA standards. The
washer should not be installed on rugs or exposed
to weather.
CLEARANCES
To ensure sufficient clearance for water lines allow
minimum clearances of at least 1 inches (2.5 cm) at
the sides and 4 inches (10 cm) behind the unit. Be
sure to allow for wall, lid, or floor moldings that may
increase the required clearances.
FLOORING
• To minimize noise and vibration, the washer
MUST be installed on a solidly constructed floor.
• Allowable slope under the entire washer is 1˚
maximum.
• Carpeting and soft tile surfaces are not
recommended.
• Never install the washer on a platform or weakly
supported structure.
Minimum vertical space from floor to overhead
shelves, cabinets, ceilings, etc., is 142cm.
10
INSTALLATION INSTRUCTIONS
UNPACK THE WASHER
After the washer is in the home, remove the
1
carton and Styrofoam® shipping base from
the washer.
When removing the washer from the carton
base, be sure to remove the tub support in the
middle of the carton base.
If you must lay the washer down to remove the
base packaging materials, always protect the
side of the washer and lay it carefully on its side.
Do NOT lay the washer on its front or back.
Remove the packing block containing the
2
owner's manual, parts, water hoses, and
laundry product samples.
Unfasten the power cord from the back of the
3
washer.
TOOLS YOU WILL NEED
• Adjustable Pliers
Tub support
• Carpenter’s Level
Carton Base
11
ENGLISH
INSTALLATION INSTRUCTIONS
99 cm
CONNECTING THE WATER LINES
• IMPORTANT: Use new hoses when installing
the washer. Do NOT reuse old hoses.
• IMPORTANT: Use ONLY the inlet hoses
provided by LG with this laundry product.
Aftermarket hoses are not guaranteed to fit or
function correctly. Other hoses may not tighten
correctly and could cause leaks. Subsequent
damage to product or property will not be
covered under the terms of LG's warranty.
• Water supply pressure must be between
100~800 kPa If the water supply pressure is
more than 800 kPa, a pressure reducing valve
must be installed.
• Periodically check the hose for cracks, leaks,
and wear, and replace the hose every 5 years.
• Make sure that the water lines are not stretched,
pinched, crushed, or kinked.
• The washer should never be installed or stored
in a location subject to freezing temperatures.
Damage to the water lines and internal
mechanisms of the washer can result. If the
washer was exposed to freezing temperatures
prior to installation, allow it to stand at room
temperature for several hours before use.
Inspect the threaded fitting on each hose and
1
make sure there is a rubber seal in place in
both ends.
Water Hose
(to water inlet
on washer)
Rubber Seal
Rubber Seal
Water Hose
(to tap)
NOTE: To avoid build up that can clog the inlet
valve screen, thoroughly flush both faucet and
hose to remove any particles or other impurities
by running water through them into a container.
3
Attach water hose to washer.
Thread the hot water hose onto the washer
hot water connection (red) and the cold water
hose onto the cold water connection (blue).
Hand tighten; then make an additional 1/8 turn
with pliers.
Hot
Cold
Do not cross-thread the hose fittings. Attach
NOTE:
the hot water line to the red hot water inlet on the back
of the washer. Attach the cold water line to the blue
cold water inlet on the back of the washer. Tighten the
fittings securely.
NOTE: Tighten the fittings securely. Open the
water taps fully to check for leaks.
CONNECTING THE DRAIN LINE
• The drain hose should always be properly
secured. Failure to properly secure the drain hose
can result in flooding and property damage.
• Do not install the end of the drain hose higher than
243.8 cm above the bottom of the washer.
• The drain must be installed in accordance with any
applicable local codes and regulations.
• Make sure that the water lines are not stretched,
pinched, crushed, or kinked.
Connect water hose to hose utilities.
2
Connect the water hoses to the HOT and
COLD water valves of your home. Hand
tighten, plus make an additional 1/4 turn with
pliers.
NOTE: A water heater set to deliver 120°F (49°C)
water to the washer.
Water Tap
Drain Hose
Standpipe
12
INSTALLATION INSTRUCTIONS
99 cm
99 cm
CONNECTING THE DRAIN LINE (cont.)
Firmly insert the free end of the drain hose
into the drain opening of your home. Make sure
the soft rubber end is completely inside the drain
opening.
• If the water valves and drain are built into the
wall, fasten the drain hose to one of the water
hoses with the cable tie (ribbed side on inside).
• If your drain is a standpipe, fasten the drain hose
to the standpipe with the cable tie provided.
NOTE:
• Total height of the hose end should be approxi-
mately 0.9 ~ 1.2 m from the floor.
• The drain hose should be inserted no more than
20-30 centimeters into the standpipe.
Cable Tie
Cable Tie
LEVELING THE WASHER
The washer spins at very high speeds, up to 1,100
RPM.
NOTE: Adjust the leveling feet only as far as
necessary to level the washer. Extending the
leveling feet more than necessary can cause
the washer to vibrate.
• All four leveling feet must rest solidly on the
floor. Rock the washer gently from corner to
corner to make sure that the washer does
not rock.
NOTE: Before installing the washer, make sure
the floor is clean, dry and free of dust, dirt, water
and oils so the washer feet can not slide easily.
Leveling feet that can move or side on the floor
can contribute to excess vibration and noise due to
poor contact with the floor.
Position the washer in the final location,
1
taking special care to not pinch, strain, or crush
the water and drain lines. Place a level across
the top of the washer.
Adjust the 2 front leveling feet. Turn clockwise
2
to raise the washer or counterclockwise to
lower it.
3
To make sure that the washer is properly
level, open the lid and look from above to see
if it is same as shown above. If you have a
level, check your washer with the level.
• To check if the washer is level side to side,
close the lid and place a level at the back of
the lid.
• To check if the washer is level front to back,
place a level at the side of the washer on
the edge where the cabinet side meets the
top cover.
If the washer is not level, adjust the front leveling
feet. Turn clockwise to raise, counterclockwise to
lower.
The washer should be plugged into a 120V AC, 60Hz
grounded 3-prong outlet. Plug in the washer.
Raise Lower
side to side
front to back
Raise
Lower
CONNECT TO THE POWER SUPPLY
13
ENGLISH
HOW TO USE
FA
D
E
B
C
CONTROL PANEL FEATURES
A
POWER ON/OFF BUTTON
Press to turn the washer ON. Press again to
turn the washer OFF.
NOTE: If the washer remains idle for 4 minutes
after turning the washer off, the water in the
tub will drain.
NOTE: An alarm will sound 1 minute prior to
draining, and 'dr' will appear on the display.
You may restart the washer at this time.
However, once the washer initiates draining,
all functions will be suspended, and ‘dr’ will be
displayed until draining is complete.
B
CYCLE SELECTOR KNOB
Turn this knob to select the desired cycle.
Once the desired cycle has been selected, the
standard presets will be shown in the display.
These settings can be adjusted using the cycle
setting buttons before starting the cycle.
START/PAUSE BUTTON
C
Press this button to START the selected cycle.
If the washer is running, use this button to PAUSE
the cycle without losing the current settings.
NOTE: If you do not press the START/PAUSE
button within 4 minutes of selecting a cycle, the
washer automatically turns off.
NOTE: If the washer remains idle for 8 minutes
after pausing the cycle, the water in the tub will
drain.
D
CYCLE MODIFIER BUTTONS
Use these buttons to select the desired cycle
options for the selected cycle. Press the button
for that setting until the indicator light for the
desired value is lit.
E
OPTION BUTTONS
The option buttons allow you to select
additional cycle options and will light when
selected. Certain buttons also allow you to
activate special functions by pressing and
holding the button for 3 seconds.
For detailed information about the individual
options, please see the following pages.
F
LED DISPLAY
The display shows the settings, estimated
time remaining, options, and status messages
for your washer. The display will remain on
through the cycle.
14
HOW TO USE
OPERATING THE WASHER
wWARNING: To reduce the risk of fire, electric shock, or personal injury when using
this appliance, follow basic precautions, including the following.
Once you have loaded the washer and added laundry products (detergent, bleach, and/or fabric softener):
SORT LAUNDRY AND LOAD WASHER.
1
Refer to page 16.
ADD DETERGENT.
2
Refer to pages 17-18.
TURN ON THE WASHER.
3
Press the POWER button to turn on the washer.
The lights around the cycle selector knob will
illuminate.
SELECT CYCLE.
4
Turn the cycle selector knob to the desired cycle.
The display will show the preset WASH/RINSE
temperature, SOIL LEVEL, SPIN SPEED for that
cycle.
SELECT CYCLE MODIFIER BUTTONS.
5
If you would like to change the modifier for that
cycle, press the appropriate cycle settings button(s)
until the indicator light for the desired setting is lit.
NOTE: To protect your garments, not every WASH/
RINSE temperature, SPIN SPEED, SOIL LEVEL, or
OPTION is available with every cycle.
SELECT OPTION BUTTONS.
6
Select any additional cycle options, such as
FABRIC SOFTENER or DELAY WASH.
NOTE: To protect your garments, not every WASH/
RINSE temperature, SPIN SPEED, SOIL LEVEL, or
OPTION is available with every cycle.
BEGIN CYCLE.
7
Press the START/PAUSE button to begin the cycle.
The lid will latch, the display will change, and the
washer will calculate the estimated time remaining.
Once the washer has calculated the estimated total
cycle time, the washer will start. To pause the cycle
at any time, press PAUSE.
To resume the cycle press START/PAUSE again.
NOTE: When the wash cycle is finished, the beeper (if set) will sound and the lid will unlock.
To prevent wrinkling, remove items from the washer immediately after the end of the cycle.
NOTE: WAVEFORCE™ is available for 8 lb. or larger loads in the COTTON/NORMAL or HEAVY DUTY cycles.
15
ENGLISH
HOW TO USE
CYCLE GUIDE
The cycle guide below shows the options and recommended fabric types for each cycle.
Cold
Cycle
Sanitary
Tub Clean
Bright Whites™
Bulky/Bedding
Heavy Duty
Perm Press
Casual
Cotton/Normal
Baby Wear
Towels
Sports Wear
Pure Color™
Speed Wash
Wool
Delicates
Fabric Type
Heavily soiled
underwear, work
clothes, diapers, etc.
Refer to page 24.
White fabrics
Large items such
as blankets and
comforters
* Use the Bulky/Bedding cycle for items such as pillows, comforters and other articles which have difficultly absorbing water. ONLY
WASH SMALL LOADS to make sure there is plenty of room for the load to move during washing. Keep like items together; do not mix
large bulky items with smaller clothing items. Failure to follow these instructions may result in damage to the clothing or to the washer.
Heavy soiled cotton
fabrics
Dress shirts/pants,
wrinkle-free clothing,
poly/cotton blend
clothing, tablecloths
Cotton, linen, towels,
shirts, sheets, jeans,
mixed loads
Small and lightly
soiled loads, specially
skin sensitive user.
Towels, shirts,
sheets, jeans, mixed
loads
Active sports,
exercise clothing
Lightly soiled and
colored clothing
Lightly soiled and
small loads
Item labeled machine
washable wool
Dress shirts/blouses
nylons, sheer or lacy
garments
Wash/Rinse
Extra Hot/Cold
Hot/Cold
Warm/Cold
Warm/Cold
Warm/Warm
Hot/Cold
Cold/Cold
Warm/Cold
Warm/Warm
Hot/Cold
Cold/Cold
Warm/Cold
Warm/Warm
Cold/Cold
Warm/Cold
Hot/Cold
Warm/Warm
Cold/Cold
Warm/Warm
Hot/Cold
Warm/Cold
Warm/Cold
Warm/Warm
Hot/Cold
Cold/Cold
Warm/Cold
Warm/Warm
Cold/Cold
Cold/Cold
Warm/Cold
Warm/Warm
Warm/Warm
Cold/Cold
Warm/Cold
Warm/Cold
Cold/Cold
Cold/Cold
Warm/Cold
Warm/Warm
Soil
Level
Heavy
Light
Normal
Heavy
Light
Normal
Normal
Heavy
Light
Heavy
Light
Normal
Normal
Heavy
Light
Normal
Heavy
Light
Light
Normal
Heavy
Normal
Heavy
Light
Normal
Heavy
Light
Normal
Heavy
Light
Light
Normal
Heavy
Light
Normal
Heavy
Light
Normal
Heavy
Spin Speed
High
Extra High
No Spin
Low
Medium
High
Medium
High
Extra High
No Spin
Low
Medium
High
Extra High
No Spin
Low
High
Extra High
No Spin
Low
Medium
Low
Medium
High
No Spin
High
Extra High
No Spin
Medium
High
Extra High
No Spin
Low
Medium
High
Extra High
No Spin
Low
Medium
Medium
High
No Spin
Low
Medium
High
Extra High
No Spin
Low
High
Extra High
No Spin
Low
Medium
Low
Medium
No Spin
Low
Medium
No Spin
Stain
Care™
Wash™
Extra
Rinse
=Default setting
RECOMMENDED LOADS
Fabric
Delay
Wash
Maximum
Load
Less than
5.0 kg
Less than
10.0 kg
Less than
10.0 kg
Less than
20.0 kg
Less than
10.0 kg
Less than
20.0 kg
Less than
5.0 kg
Less than
10.0 kg
Less than
10.0 kg
Less than
3.0 kg
Less than
3.0 kg
Less than
4.0 kg
Less than
4.0 kg
Softener
-
NOTE: To protect your garments, not every wash/rinse temperature, spin speed, soil level, or option is
available with every cycle.
16
HOW TO USE
SORTING WASH LOADS
wCAUTION:
• Do not load items over the tub.
Failure to follow this caution can result in leakage or fabrics damage.
• Use the BULKY/BEDDING cycle for buoyant or nonabsorbent items such as pillow or comforter.
Failure to follow this caution can result in leakage.
Fabric Care Labels
Most articles of clothing feature fabric care labels
that include instructions for proper care.
Fabric Care Labels
Grouping Similar Items
For best results, sort clothes into loads that can
be washed with the same wash cycle.
Different fabrics have different care requirements.
Always wash dark colors separately from light
colors and whites to prevent discoloration. If
possible, do not wash heavily soiled items with
lightly soiled ones. The chart below shows
recommended groupings.
Sort Laundry...
by Colors by Soil by Fabric by Lint
Whites Heavy Delicates Lint Producer
Lights Normal Easy Care Lint Collector
Darks Light Sturdy
Loading the Washer
Bulky items should be placed as far down in the
wash basket as possible for optimal results.
Always place buoyant items at the bottom of the
wash basket.
The washer will automatically detect the load size.
Because of the high-efficiency wash system, the
water level may not completely cover the load.
To add items after washer has started, press the
START/PAUSE button, lift the lid, add items, and
close the lid. Press the START/PAUSE button.
Refer to page 20.
• Check all pockets to make sure that they
are empty. Items such as clips, matches,
pens, coins, and keys can damage both your
washer and your clothes.
• Close zippers, hooks, and drawstrings to
prevent these items from snagging or tangling
on other clothes.
• Pretreat heavily stained areas for best results.
• Large items should not be more than half of the
total wash load.
• Do not wash or spin water proof clothes.
• Do not wash fabrics containing ammable
materials (waxes, cleaning fluids, etc.)
• The washer will not ll or operate with the lid
open.
* IMPORTANT: Use the Bulky/Bedding cycle for
large or bulky items such as poly-filled jackets,
comforters, pillows, etc. These items may not be
as absorbent as other laundry items and should
be sorted into a separate wash load for optimal
results.
17
ENGLISH
HOW TO USE
ABOUT THE DISPENSER
The automatic dispenser consists of two
compartments which hold:
• Liquid fabric softener.
• Liquid or powdered detergent.
All laundry products can be added at once
in their respective dispenser compartments.
They will be dispensed at the appropriate
time for the most effective cleaning.
After adding the laundry products to the
dispenser, close the dispenser drawer.
To add detergent, and fabric softener to the
automatic dispenser:
1
Open the dispenser drawer.
Load the laundry products into the
2
appropriate compartments.
3
Close the drawer slowly and smoothly
to avoid spilling, splashing or premature
dispensing of the contents.
NOTE: It is normal for a small amount
of water to remain in the dispenser
compartments at the end of the cycle.
NOTE: Do not use bleach in the dispenser
drawer.
Main Wash
Powder
Detergent
Compartment
Liquid Fabric
Softener
Compartment
Main Wash
Liquid Detergent
Compartment
Removing the dispenser drawer
Pull the dispenser
1
drawer.
Tilt the dispenser
2
drawer upward
and remove it.
Replacing the dispenser drawer
Place rail ② (dispenser
1
drawer rail) on top of
rail ①.
Push the dispenser
2
drawer firmly.
NOTE: Be careful not to pinch your finger.
①
②
Insert
18
HOW TO USE
LOADING THE DISPENSER
Using the Liquid Bleach Dispenser
The bleach dispenser
automatically dilutes and
dispenses liquid chlorine
bleach at the proper time
in the
wash cycle.
Check clothing care labels for special
1
instructions.
Measure liquid bleach carefully, following
2
instructions on the bottle.
• Never pour undiluted liquid chlorine bleach
directly onto clothes or into the wash basket.
• Do not pour powdered bleach into bleach
dispenser. Do not place load items on top
of the bleach dispenser when loading and
unloading the washer.
• Avoid overlling or splashing when adding
bleach to the dispenser. The maximum capacity
of the bleach dispenser is one cup of bleach
per wash cycle. Overfilling could result in
premature dispensing of bleach.
Before starting the washer, pour a pre-
3
measured amount of bleach directly into bleach
dispenser. If you prefer to use powdered
bleach, add it into the wash basket directly
before adding clothes.
NOTE: Please flush the bleach dispenser with water
after bleach use and then rinse out the residue by
use of Rinse & Spin cycle.
wWARNING: Do NOT mix chlorine
bleach with ammonia or acids, such as vinegar or
rust / scale remover.
Mixing chemicals like these can produce gas which
may cause death.
Put the manufacturer’s recommended amount of
undiluted liquid chlorine bleach into the bleach
dispenser. During the final portion of the wash cycle,
two sequential flushes of the dispenser put all the
bleach into the wash load and completely flush
the dispenser to eliminate the carryover of bleach
to a subsequent load. Any liquid remaining in the
bleach dispenser at the end of the cycle is water,
not bleach.
To prevent unintentional self-siphoning of the bleach,
never fill the dispenser higher than the maximum fill
level marked on the dispenser.
When adding bleach to the dispenser, be careful
to avoid spilling it into the laundry load or leaving
droplets of bleach around the dispenser. These
things will damage your laundry items.
Main Wash Detergent Compartment
This compartment holds laundry detergent
for the main wash cycle, which is added to
the load at the beginning of the cycle.
Never exceed the detergent manufacturer’s
recommendations when adding detergent.
Using too much detergent can result in
detergent buildup in clothing and the washer.
Either powdered or liquid detergent may be used.
• When using liquid detergent, make sure the
liquid detergent cup and insert are in place.
Do not exceed the maximum fill line.
• When using powdered detergent, remove
the insert and liquid detergent cup from the
compartment. Powdered detergent will not
dispense with the liquid detergent cup and
insert in place.
Fabric
Softener
Main Wash
Detergent
Fabric Softener Compartment
This compartment holds liquid fabric softener,
which will be automatically dispensed during the
final rinse cycle.
• Always follow the detergent manufacturer’s
recommendations when adding fabric softener.
Do not exceed the maximum fill line. Using
too much fabric softener may result in stained
clothes.
• Dilute concentrated fabric softeners with warm
water. Do not exceed the maximum fill line.
• Never pour fabric softener directly onto the load
or into the drum.
19
ENGLISH
HOW TO USE
A D
CE
B
THE LED DISPLAY
The LED display shows the settings, estimated time remaining, options, and status messages
for your washer. When the washer is turned on, the display will illuminate.
A
CYCLE STATUS INDICATOR
This portion of the display shows which stage
of the wash cycle is currently underway LOAD
SENSING, WASH, RINSE, or SPIN.
B
ESTIMATED TIME REMAINING
When the START/PAUSE button is pressed, the
washer automatically detects the wash load
(weight) and optimizes the washing time based
on the selected cycle and options. The display
will then indicate the estimated time remaining
for the selected wash cycle.
C
LID LOCK INDICATOR
Indicates that the lid is locked. The washer lid
will lock while the washer is operating. The lid
can be unlocked by pressing the START/PAUSE
button to stop the washer.
D
DELAY WASH INDICATOR
This indicator shows that the washer has
been set for DELAY WASH. The washer will
start automatically after the set delay time
has passed.
E
COLDWASH™
This indicator turns on the light in eleven cycles.
These cycles save energy by using cold water.
20
HOW TO USE
CYCLE MODIFIER BUTTONS
Each cycle has preset settings that are selected
automatically. You may also customize the settings
using the cycle setting buttons.
Press the button for that setting until the indicator
light for the desired value is lit.
The washer automatically adjusts the water level for
the type and size of wash load for best results and
maximum efficiency. It may seem there is no water
inside the tub in some cycles, but this is normal.
NOTE: To protect your garments, not every wash/
rinse temperature, spin speed, soil level, or option is
available with every cycle. A beeper will sound and
the LED will not light if a selection is not allowed.
See the Cycle Guide on page 15 for details.
WASH/RINSE
Adjust to select the proper water
temperature for the wash cycle. It is
composed of washing temperature/
rinsing temperature.
• Your washer features a heating
element to boost the hot water
temperature for Extra Hot/Cold or
Hot/Cold settings.
• Select the water temperature
suitable for the type of load you are
washing. Follow the fabric care label
for best results.
• Warm rinses leave the loads drier than cold rinses.
Warm rinses can increase wrinkling.
• In cold climates, a warm rinse makes the load
more comfortable to handle.
• Cold rinses use less energy.
• Use both hot and cold water supply for optimal
results.
SOIL LEVEL
Adjusts the selected cycle to allow
more faster agitation speed for heavily
soiled clothes or less slower agitation
speed for lightly soiled clothes during
the wash and rinse course.
Press the SOIL LEVEL button until the
indicator light for the desired setting
is lit. You can choose between Light,
Normal or Heavy soil.
• The light will not show on this gure (▼).
SPIN SPEED
The washer drum spins at up to 1,100
RPM. This reduces drying time and
saves energy. Press the SPIN SPEED
button until the indicator light for the
desired setting is lit. You can change
maximum spin speed of spin cycle.
Some fabrics, such as delicates,
• If you select NO SPIN, the washer
require a slower spin speed.
turn off without spin cycle after
draining. (The cycle time will be
reduced by approximately 10
minutes.)
SPECIAL USE
Select any additional option, such
as RINSE+SPIN, SPIN ONLY, STAIN
CARE™ or SOAK
• If you press SPECIAL USE button
without selecting a cycle, COTTON/
NORMAL cycle with SOAK is
automatically selected.
NOTE: If you press SPECIAL USE
button 3 or 4 times, the cycle will
reset to COTTON/NORMAL.
ADD GARMENTS
Laundry may be added to the load at the proper
time in the wash cycle.
• ADD GARMENTS is automatically turned on
and off. You can not select it by pressing
SPECIAL USE button.
• If additional items are added during ADD
GARMENTS light is off, it may cause
unsatisfactory performance.
During ADD GARMENTS indicator light on.
Press START/PAUSE button to pause the
1
washer.
2
Open the lid after unlocked.
3
Add your additional items.
4
Close the lid.
Press START/PAUSE button to resume
5
the washer cycle. The washer will start
automatically.
NOTE: If the washer remains idle for 8 minutes
after pausing the cycle, the water in the tub will
drain.
Loading...