LG WM5000H A Series Owner's Manual

ENGLISH

FRANÇAIS

OWNER’S MANUAL

WASHING MACHINE

Please read this owner's manual thoroughly before operating and keep it handy for reference at all times.

WM5000H*A

MFL69306208

www.lg.com

TABLE OF CONTENTS

3 IMPORTANT SAFETY INSTRUCTIONS

3 BASIC SAFETY PRECATUTIONS 4 GROUNDING INSTRUCTIONS 5 SAFETY INSTRUCTIONS FOR INSTALLATION 6 SAFETY INSTRUCTIONS FOR USE, CARE,

CLEANING, AND DISPOSAL

7 REGULATION NOTICE FOR

TRANSMITTER MODULE CONTAINED IN WASHING MACHINE

7 FCC Statement 8 PRODUCT SPECIFICATIONS

9 PRODUCT FEATURES

INTRODUCING YOUR WASHING MACHINE

10 Parts and Accessories 11 Control Panel Features 12 Display

13 INSTALLATION INSTRUCTIONS

13 Preview installation order 14 Checking and choosing the proper location 15 Unpacking and removing shipping bolts 16 Connecting the water lines 17 Connecting the drain line 18 Leveling the washing machine 19 Plugging in the power cord and grounding 19 Test run

20 PREPARATION

20 Sorting wash loads 20 - Precautions for fabric care before wash cycle 21 - Fabric care labels 21 - Sorting laundry 21 Using the detergent dispenser lid 21 - Opening the lid 21 - Closing the lid 22 Using detergent/fabric softener 22 - Recommended detergent 22 - Loading the dispenser

24 USING YOUR WASHING MACHINE

24 Basic operation 25 Cycle guide 26 Main cycle 26 - For white fabrics, Bright Whites™ 26 - Reduce laundry allergen, Allergiene™ 26 - Reduce laundry bacteria, Sanitary 26 - Blankets or bulky items, Bedding 26 - Heavily soiled items, Heavy Duty 26 - Normal items, Normal 26 - For sportswear, Sportswear 26 - Wrinkle free items, Perm.Press 26 - Sheer items, Delicates 26 - For towels, Towels 26 - Quick wash, Speed Wash 26 - Rinse, drain and spin only, Rinse+Spin 26 - Downloading cycles, Downloded

27 Cycle modifier buttons 27 - Setting the water temperature, Temp. 27 - Setting spin speed, Spin 27 - Setting soil level of laundry, Soil 28 - Adjusts the melody and button tones, Signal 28 Setting options before cycle 28 - High temperature, Steam 28 - Lower energy costs, Smart Grid 28 - Control your appliance remotely, Remote Start 29 - Presetting the start time, Delay Wash 29 - Selecting your customized cycle, Custom PGM 29 - Saving time, Turbo Wash™ 29 - Saving energy, Cold Wash 29 - Adding extra rinse cycle, Extra Rinse 29 - Prewashing, Pre Wash 30 Setting the options during cycle 30 - Tumbles clothes to prevent wrinkles, Fresh Care 30 - Saving customized wash cycle, PGM Save 30 - Drum Lighting, Drum Light 30 - Button lock feature, Child Lock

31 SMART APPLIANCE CONNECTIVITY

31 Connectivity Overview 31 Connectivity Setup 31 - Install LG Smart Laundry application 31 - Profile Setup (ID and Password setup) 31 - Product Registration and Wi-Fi Setup 32 Smart ThinQ 32 - Remote Start 32 - Using Remote Start 32 - Smart Grid 33 - Download Cycle 33 - Smart Diagnosis™ 33 - Cycle Set 33 - Laundry Stats 33 - Smart Message 33 - Energy Monitoring

34 USING SMART DIAGNOSIS™

34 Adudible Diagnosis 34 Smart Diagnosis™ Through the Call Center

35 MAINTENANCE

35 Care 35 - Care after wash 35 - Care in cold climates 36 Cleaning 36 - Cleaning the drum, Tub Clean 37 - Cleaning the detergent dispenser 38 - Cleaning the water inlet filters 39 - Cleaning the drain pump filter 40 - Cleaning the door seal

41 TROUBLESHOOTING

41 Checking error messages 42 Before calling for service

43 SPECIFICATIONS

44 WARRANTY

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USE

WARNING

For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, injury to persons, or death.

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and

obey all safety messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word DANGER, WARNING or CAUTION.

These words mean:

DANGER

You will be killed or seriously injured if you don’t immediately follow instructions.

WARNING

You can be killed or seriously injured if you don’t follow instructions.

CAUTION

You may be slightly injured or cause damage to the product if you do not follow instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury,

and tell you what can happen if the instructions are not followed.

BASIC SAFETY PRECAUTIONS

WARNING

To reduce the risk of fire, electric shock, or injury to persons when using this appliance, follow basic precautions, including the following.

• Use this appliance only for its intended purpose as

described in this owner’s Manual.

• Before use, the washer must be properly installed as

described in this manual.

• Do not wash articles that have been previously

cleaned in, washed in, soaked in, or spotted with gasoline, dry cleaning solvents, or other flammable or explosive substances, as they give off vapors that

could ignite or explode.

• Do not add gasoline, dry cleaning solvents, or other

flammable or explosive substances to the wash water.

These substances give off vapors that could ignite or explode.

• Under certain conditions, hydrogen gas may be

produced in a hot water system that has not been used for 2 weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot water system has not been

used for such a period, before using the washer, turn on all hot water faucets and let the water flow from each for several minutes. This will release any accu- mulated hydrogen gas. As the gas is flammable, do not smoke or use an open flame during this time.

• Do not allow children to play on or in the washer.

Close supervision of children is necessary when the washer is used near children.

• Before the washer is removed from service or dis-

carded, remove the lid to prevent children from climbing inside.

• Do not install or store the washer where it will be

exposed to the weather or freezing temperatures.

• Do not tamper with controls.

• Keep the area underneath and around your appli-

ances free of combustible materials (lint, paper, rags, etc.), gasoline, chemicals and other flammable vapors and liquids.

• Do not repair or replace any part of the washer or

attempt any servicing other than as described in this manual. We strongly recommend that any service be

performed by a qualified technician.

• See Installation Instructions for grounding require-

ments.

• ALWAYS follow the fabric care instructions supplied

by the garment manufacturer.

• Do not place items exposed to cooking oil in your

washer. Items contaminated with cooking oils may

contribute to a chemical reaction that could cause a load to catch fire.

• Use fabric softeners or products to eliminate static

only as recommended by the manufacturer.

• This washer is not designed for maritime use or for

mobile installations such as in RVs, aircraft, etc.

• Turn off the water faucets and unplug the washer if

the machine is to be left for an extended period of time, such as during vacations.

• Do not use to dry articles containing foam rubber or

similarly textured rubber-like materials.

• Packaging material can be dangerous for children.

There is a risk of suffocation! Keep all packaging from children.

• Always check the inside of the washer for foreign

objects before loading laundry. Keep the lid closed when not in use.

• Do not reach into the appliance if the tub or agitator is

moving.

• WARNING : This product contains chemicals known

to the State of California to cause cancer and birth defects or other reproductive harm.

after handling.

Wash hands

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USE

WARNING

For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, injury to persons, or death.

GROUNDING INSTRUCTIONS

This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance is equipped with a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

WARNING

Improper connection of the equipment-grounding conductor can result in risk of electric shock. Check with a qualified electrician or servicer if you are in doubt as to whether the appliance is properly grounded. Do not modify the plug provided with the appliance. If it does not fit the outlet, have a proper outlet installed by a qualified electrician. Failure to follow these warnings can cause serious injury, fire, electric shock, or death.

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USE

WARNING

For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, injury to persons, or death.

SAFETY INSTRUCTIONS FOR INSTALLATION

WARNING

To reduce the risk of fire, electric shock, or injury to persons when using this appliance, follow basic precautions, including the following.

• Refer to INSTALLATION INSTRUCTIONS for detailed

grounding procedures. Installation instructions are

packed with the washer for installer’s reference. If the washer is moved to a new location, have it checked and reinstalled by a qualified service technician. Failure to follow this warning can cause serious injury, fire, electric shock, or death.

• Do not, under any circumstances, cut or remove the

third (ground) prong from the power cord. Failure to

follow this warning can cause serious injury, fire, electric shock, or death.

• For personal safety, this appliance must be properly

grounded. Failure to follow this warning can cause

serious injury, fire, electric shock, or death.

• The power cord of this appliance is equipped with a

3-prong (grounding) plug which mates with a standard 3-prong (grounding) wall outlet to minimize the pos-

sibility of electric shock from this appliance.

• This washer must be plugged into a 120 VAC, 60 Hz

grounded outlet. Failure to follow this warning can

cause serious injury, fire, electric shock, or death.

• Have the wall outlet and circuit checked by a qualified

electrician to make sure the outlet is properly grounded. Failure to follow this warning can cause serious

injury, fire, electric shock, or death.

• Where a standard 2-prong wall outlet is encountered,

it is your personal responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet. Failure to follow this warning can cause

serious injury, fire, electric shock, or death.

• Do not install on carpet. Install washer on a solid floor.

Failure to follow this warning can cause serious leak damage.

• Do not remove ground prong. Do not use an adapter

or extension cord. Plug into a grounded 3-prong outlet. Failure to follow these warnings can cause seri-

ous injury, fire, electric shock, or death.

• The washer should always be plugged into its own

individual electrical outlet which has a voltage rating that matches the rating plate. This provides the best

performance and also prevents overloading house wiring circuits which could cause a fire hazard from overheated wires.

• Never unplug your washer by pulling on the power

cord. Always grip plug firmly and pull straight out

from the outlet. Failure to follow this warning can cause serious injury, fire, electric shock, or death.

• Repair or immediately replace all power cords that

have become frayed or otherwise damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either end. Failure to follow this

warning can cause serious injury, fire, electric shock, or death.

• When installing or moving the washer, be careful not

to pinch, crush, or damage the power cord. Failure to

follow this warning can cause serious injury, fire, electric shock, or death.

• The washer must be installed and electrically ground-

ed by a qualified service person in accordance with local codes to prevent shock hazard and assure

stability during operation.

• The washer is heavy. Two or more people may be

needed to install and move the appliance. Failure to

do so can result in back or other injury.

• Store and install the washer where it will not be ex-

posed to temperatures below freezing or exposed to outdoor weather conditions. Failure to follow this

warning can cause serious leak damage.

• Do not install the washer in humid spaces to reduce

the risk of electric shock. Failure to follow this warn-

ing can cause serious injury, fire, electric shock, or death.

• To reduce the risk of injury to persons, adhere to all

industry recommended safety procedures including the use of long sleeved gloves and safety glasses.

Failure to follow all of the safety warnings in this manual could result in property damage, injury to persons or death.

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USE

WARNING

For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, injury to persons, or death.

SAFETY INSTRUCTIONS FOR USE, CARE, CLEANING, AND DISPOSAL

WARNING

To reduce the risk of fire, electric shock, or injury to persons when using this appliance, follow basic precautions, including the following.

• Unplug the washer before cleaning to avoid the risk

of electric shock.

• Never use harsh chemicals, abrasive cleaners, or

solvents to clean the washer. They will damage the

finish.

• Do not put oily or greasy rags or clothing on top of the

washer. These substances give off vapors that could

ignite the materials.

• Do not wash items that are soiled with vegetable or

cooking oil. These items may contain some oil after

laundering. Due to the remaining oil, the fabric may smoke or catch fire by itself.

• Disconnect this appliance from the power supply

before attempting any user maintenance. Turning the controls to the OFF position does not disconnect this appliance from the power supply. Failure to follow

this warning can cause serious injury, fire, electric shock, or death.

• Do not combine laundry products for use in one load

unless specified on the label.

• Do not mix chlorine bleach with ammonia or acids

such as vinegar. Follow package directions when using laundry products. Incorrect usage can produce

poisonous gas, resulting in serious injury or death.

• Do not reach into the washer while parts are moving.

Before loading, unloading, or adding items, press the START/PAUSE button and allow the drum to coast to a complete stop before reaching inside. Failure to fol-

low this warning can cause serious injury, fire, electric shock, or death.

• Do not allow children to play on or in the washer.

Close supervision of children is necessary when the washer is used near children. As children grow, teach them the proper, safe use of all appliances. Failure to

comply with these warnings could result in serious injury to persons or death.

• Destroy the carton, plastic bag, and other packing

materials after the washer is unpacked. Children might use them for play. Cartons covered with rugs, bedspreads, or plastic sheets can become airtight chambers. Failure to comply with these warnings

could result in serious injury to persons or death.

• Keep laundry products out of children’s reach. To

prevent injury to persons, observe all warnings on product labels. Failure to comply with these warn-

ings could result in serious injury to persons or death..

• Remove the door to the washing compartment to

avoid the danger of children or small animals getting trapped inside before your washer is removed from service or discarded. Failure to do so can result in

serious injury to persons or death.

• Make sure the dispenser lid is closed at all times

when not being filled with laundry products. Failure to

keep the lid closed can result in personal injury or flooding.

SAVE THESE INSTRUCTIONS

REGULATION NOTICE FOR TRANSMITTER MODULE CONTAINED IN WASHING MACHINE

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

- Reorient or relocate the receiving antenna

FCC RF Radiation Exposure Statement:

equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Responsible Party: LG Electronic USA, Inc. 1000 Sylvan Avenue Englewood Cliffs, NJ 07632 TEL. : +1-800-243-0000

Industry Canada Statement:

This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions:

1) this device may not cause interference and

2) this device must accept any interference, including interference that may cause undesired operation of the device

Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.

IC Radiation Exposure Statement:

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator & your body.

This

ENGLISH

REGULATION NOTICE FOR TRANSMITTER MODULE CONTAINED IN WASHING MACHINE

PRODUCT SPECIFICATIONS

Standard IEEE 802.11 b/g/n

Host Interface UART

Operating Frequency 2.412–2.462 GHz

Security 64/128 bit WEP, WPA, WPA2, AES

802.11b: 133.660 mW

Maximum Output Power

Modulation Type

Data Rate

Number of Channels

Open Source Software Notice Information

To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http://opensource.lge.com.

In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.

LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to opensource@lge.com. This offer is valid for three (3) years from the date on which you purchased the product.

802.11g: 319.890 mW

802.11n (HT20): 298.538 mW

802.11b (HT40): 204.174 mW

CCK, DQPSK, DBPSK for DSSS 64 QAM, 16 QAM, QPSK, BPSK for OFDM

802.11b: up to 11 Mbps

802.11g: up to 54 Mbps

802.11n: up to 150 Mbps

11 for 802.11b, 802.11g, 802.11n (HT20) 7 for 802.11n (HT40)

PRODUCT FEATURES

INVERTER DIRECT DRIVE MOTOR

The inverter motor, which is directly connected to the tub, produces little noise and vibration and offers great durability and a long lifespan.

SMART THINQ

Remote Start

Smart Message

Smart Grid

Download Cycle Smart Diagnosis™

Cycle Set Laundry Stats

Energy Monitoring

TUB CLEAN

Regular cleaning of the tub on a monthly basis using Tub Clean can help keep the tub clean and fresh.

LARGE CAPACITY STAINLESS STEEL DRUM

The large capacity stainless steel drum offers extreme durability and is tilted to improve efficiency and allow easier access for large items.

- Use a smart phone to control your appliance remotely. Also, it is possible to monitor your cycle operation so you know how much time is left in the cycle.

- When the cycle is complete or the appliance has problems, you have the option of receiving push notifications on your smart phone.

- Smart appliances can communicate with local utility companies that are equipped with Smart Grid equipment. (Refer to page 32).

- Download new and special cycles that are not included with the machine.

- Should you experience technical difficulty, your appliance has the capability of transmitting data by phone to the Customer Information Center to diagnosis the problem.

- This feature automatically sets cycle settings based on your laundry needs.

- This feature provides the Tub Clean timing and cycle use history for the machine.

- Your washer energy usage is affected by the cycle and settings so you may see some changes in energy usage from one cycle to another.

ENGLISH

CHILD LOCK

Use this option to disable the controls during a wash cycle. This option can prevent children from changing cycles or operating the machine.

DETERGENT DISPENSER

The four-compartment dispenser makes it easy to separate the pre-wash detergent, the main laundry detergent, liquid bleach, and fabric softener into different compartments.

HIGH TEMPERATURE STEAM CYCLES

During LG's unique high-temperature steam cycles, the hot steam helps to remove tough stains.

INTRODUCING YOUR WASHING MACHINE

Parts and Accessories

Parts

Detergent

dispenser

(See page 23)

Water inlets

Water circulation

Door

Accessories

Drain pump filter cover

Drain pump filter Drain hose

nozzles

Door seal

Tu b

Leveling feet

Shipping

bolts

Power cord

Drain hose

Included Accessories

Hot/cold water

hoses

Wrench Tie strap

Non-skid pads

Caps for covering

shipping bolt holes

Elbow bracket

(for securing drain hose)

Optional Accessories

Pedestal or Pedestal Washer

(sold separately)

NOTE

yContact LG Customer Service at 1-800-243-0000 (1-888-542-2623 in Canada) if any accessories are missing. yFor your safety and for extended product life, use only authorized components. The manufacturer is not

responsible for product malfunction or accidents caused by the use of separately purchased unauthorized components or parts.

yThe images in this guide may be different from the actual components and accessories, and are subject to

change by the manufacturer without prior notice for product improvement purposes.

INTRODUCING YOUR WASHING MACHINE

Control Panel Features

Cycle selector

Power Button

Operation

Button Description

Operation

Start/ Pause Button

yTurns the washing machine on and off. y(During the wash cycle) stops operation, and cancels the settings.

Bright Whites™

- For white fabrics (see page 26)

Allergiene™

- For cotton, underwear (see page 26)

Sanitary

- For underwear, diapers, etc. (see page 26)

Bedding

- For blankets or large bulky items (see page 26)

Heavy Duty

- For heavily soiled cotton fabric (see page 26)

Normal

- For general laundry, such as cotton T-shirts or towels (see page 26)

Sportswear

- For sportswear (see page 26)

Perm.Press

- For wrinkle-free fabrics (see page 26)

Delicates

- For sheer and delicate fabrics (see page 26)

Towels

- For towels (see page 26)

Speed Wash

- For small quantities of lightly soiled items (see page 26)

Rinse + Spin

- For Rinse, drain and Spin only (see page

Downloaded

- For downloadable cycles. The default cycle is Small Load. (see page 33).

Tub Clean

- For tub clean (see page 36)

yStarts or pauses the washing machine cycle. Hold a second to Start

- If you do not press the button within 1 hour of selecting a cycle, the washing machine will turn off automatically.

y(Press repeatedly) Selects the water temperature for the wash cycle (see page 27).

- Select water temperature from 5 settings.

y(Press repeatedly) Selects the spin speed in the desired level (see page 27).

- Selects spin speed from 5 settings.

y(Press repeatedly) Selects a wash cycle by soil level (see page 27).

- Selects soil level from 5 settings.

y(Press repeatedly) Selects a Melody or Button sound by signal(see page 28).

Water Temperature Selection Button

26)

Display

Spin Speed Selection Button

Soil Level Selection Button

Signal Sound Selection Button

ENGLISH

INTRODUCING YOUR WASHING MACHINE

Operation (continued)

Button Description

Display

Cycle process indicator

y(Press before starting wash cycle) Use Steam option for extra cleaning power (See page

28).

y(Press and hold 3 seconds) Fresh Care tumbles clothes to prevent wrinkles (See page 30).

yUse Smart Grid to lower your energy costs by avoiding peak usage times

(See page 28).

y(Press and hold 3 seconds before starting wash cycle) Use Remote Start to control

your washer remotely (See page 28).

y(Press before starting wash cycle) Set delay time of starting cycle (See page 29). y(Press and hold 3 seconds after turning on the machine) Use Wi-Fi Connect for

connecting to the internet through your home Wi-Fi network (See page 31).

yUse Custom PGM to recall the customized wash cycle you had previously saved

(See page 29).

y(Press and hold 3 seconds after setting the desired option) Use PGM Save to save

special combination of setting that you use frequently (See page 30).

yUse Turbo Wash™ to save time (See page 29).

yUse Cold Wash to save on energy consumption (See page 29).

y(Press before wash cycle) Add an extra rinse to the selected cycle (See page 29). y(Press and hold during wash cycle) The drum is equipped with a white LED light that

illuminates when the washer is turned on (See page 30).

yPre-wash heavily soiled laundry (See page 29). y(Press and hold 3 seconds during wash cycle) Use the Child Lock option to Lock/

Unlock the controls (See page 30).

Door lock indicator

Child lock

indicator

Fresh Care indicator

Wi-Fi Connection indicator

Estimated time remaining/ error message display

(See page 41)

Display Icon Description

yThis portion of the display shows which stage of the wash cycle is currently

underway (Sensing, Wash, Rinse and Spin).

yIndicates that the door is locked. The washer door will lock while the washer is operating.

The door can be unlocked by pressing the Start/Pause button to stop the washer.

yWhen Child Lock is set, the Child Lock indicator appears and all buttons are

disabled except the Pre Wash button. This prevents children from changing settings while the washer is operating.

yThis indicator shows that the washer has been set for Fresh Care. This function

provides periodic tumbling for up to about 19 hours to prevent wrinkles.

yWhen the appliance is connected to the internet through a home Wi-Fi network,

this indicator appears.

yWhen the Start/Pause button is pressed, the washer automatically detects the wash load

(weight) and optimizes the washing time, based on the selected cycle and options. The display will then indicate the estimated time remaining for the selected wash cycle.

yWhen the

y When the

signal is detected, this indicator appears.

Smart Grid

Remote Start

mode is activated, this indicator appears.

INSTALLATION INSTRUCTIONS

Preview installation order

Checking and choosing

the proper location

Connecting the drain line Leveling the washing

Test run

Unpacking and

removing shipping bolts

machine

Connecting the water line

Plugging in the power

cord and grounding

ENGLISH

WARNING

yWasher is heavy! Two or more people are required when moving and unpacking the washer.

can result in back or other injury.

yStore and install the washer where it will not be exposed to temperatures below freezing or exposed to

outdoor weather conditions.

death.

yProperly ground washer to conform with all governing codes and ordinances.

can cause serious injury, fire, electric shock, or death.

yTo reduce the risk of electric shock, do not install the washer in humid spaces.

can cause serious injury, fire, electric shock, or death.

yThe base opening must not be obstructed by carpeting when the washer is installed on a carpeted floor.

yDo not remove ground prong. Do not use an adapter or extension cord. Plug into a grounded 3-prong outlet.

Failure to follow this warning can cause serious injury, fire, electric shock, or death.

Failure to follow this warning can cause serious injury, fire, electric shock, or

Failure to follow this warning

Failure to do so

INSTALLATION INSTRUCTIONS

(83.2 cm)

Checking and choosing the proper location

Install the washing machine on a solid floor that is strong and rigid enough to support the weight of the washing machine, even when fully loaded, without flexing or bouncing. If the floor has too much flex, you may need to reinforce it to make it more rigid. If the floor is not solid, it may cause severe vibration and noise.

Clean the floor before installation.

- Make sure to select solid and smooth ground.

Two or more people are needed for moving and

unpacking the washing machine.

Allow for sufficient space between the walls and

the washing machine for installation.

Space requirements

You must allow sufficient space for water lines, the drain line, and airflow.

NOTE

yBe sure to allow for wall, door, or floor moldings

that may increase the required clearances.

Clearances

(59.4cm)

NOTE

yThe floor must be strong and rigid enough to

support the weight of the washer, when fully loaded, without flexing or bouncing. If your floor has too much flex, you may need to reinforce it to make it more rigid. A floor that is adequate for a top-loading washer may not be rigid enough for a front loading washer, due to the difference in the spin speed and direction. If the floor is not solid, your washer may vibrate and you may hear and feel the vibration throughout your house.

yBefore installing the washer, make sure the

floor is clean, dry and free of dust, dirt, water and oils so the washer feet can not slide easily. Leveling feet that can move or slide on the floor can contribute to excess vibration and noise due to poor contact with the floor.

yIf a drip pan must be used, take extra care

to follow the instructions provided with the drip pan and make sure the leveling feet are adjusted for firm and even contact with the pan. Use of drip pans and failure to properly level the machine may result in increased vibration and noise during operation.

Installing on a pedestal

31 "

(80.2 cm)

55"

(139.6 cm)

(10 cm)

(2.5 cm)

27"

(68.6 cm)

1" (2.5 cm)

NOTE

yRefer to the instructions packaged with the

32 "

4" (10 cm)

optional PEDESTAL before installing with a PEDESTAL.

INSTALLATION INSTRUCTIONS

Unpacking and removing shipping bolts

When removing the washer from the carton base, be sure to remove the foam drum support in the middle of the carton base. If you must lay the washer down to remove the base packaging materials, always lay it carefully on its side. Do NOT lay the washer on its front or back.

Starting with the bottom two shipping bolts,

use the wrench (included) to fully loosen all four shipping bolts by turning them counterclockwise. Remove the bolt assemblies by wiggling them slightly while pulling them out.

Shipping

bolt

Retainer

NOTE

ySave the bolt assemblies for future use. To

prevent damage to internal components, DO NOT transport the washer without reinstalling the shipping bolts.

yFailure to remove shipping bolts and retainers

may cause severe vibration and noise, which can lead to permanent damage to the washer. The cord is secured to the back of the washer with a shipping bolt to help prevent operation with shipping bolts in place.

ENGLISH

Locate the four hole caps included in the

accessory pack and install them in the shipping bolt holes.

Cap

INSTALLATION INSTRUCTIONS

Connecting the water lines

Check the rubber seals on both sides of the hose.

- Insert a rubber seal into the threaded fittings on each hose to prevent leaking.

Rubber seal

Water hose (To water inlet on the washing machine)

Connect the water supply hoses to the HOT and

COLD water faucets tightly by hand and then tighten another 2/3 turn with pliers.

- Connect the blue hose to a cold water faucet and the red hose to a hot water faucet.

WARNING

yDo not overtighten.

result.

After connecting inlet hose to water faucets,

turn on the water faucets to flush out foreign substances (dirt, sand or sawdust) in the water lines. Let water drain into a bucket, and check the water temperature.

Damage to the coupling can

Rubber seal

Water hose (To faucet)

Connect the hoses to the water inlets tightly

by hand and then tighten another 2/3 turn with pliers.

- Connect the blue hose to the cold water inlet and the red hose to the hot water inlet.

Cold

water

inlet

WARNING

yDo not overtighten the hoses.

can damage the valves resulting in leaking and property damage.

Check for leaks by turning on the faucets.

- If water leaks, check steps 1 to 4 again.

NOTE

yFor your safety, and for extended product

life, use only authorized components. The manufacturer is not responsible for product malfunction or accidents caused by the use of separately purchased, unauthorized parts.

yUse new hoses when you install the washing

machine. Do not reuse old hoses. Use only the inlet hoses provided with the washer. LG does not recommend the use of aftermarket hoses.

yPeriodically check the hoses for cracks, leaks

and wear, and replace the hoses every five years.

yDo not stretch the water hoses intentionally,

and make sure that they are not crushed by other objects.

yWater supply pressure must be between 20

psi and 120 psi (138–827 kPa). If the water supply pressure is more than 120 psi, a pressure reducing valve must be installed.

yTo provide optimum washing performance

the hot water temperature should be set at 120-135°F (48-57°C) and the cold at 60°F (15°C).

Overtightening

Hot water inlet

INSTALLATION INSTRUCTIONS

Connecting the drain line

Secure the drain hose in place to prevent moving and leaking.

NOTE

yThe drain hose should be properly secured.

Failure to properly secure the drain hose can result in flooding and malfunction.

yTotal height of the house end should not exceed

96 inches (244.8 cm) from the bottom of the washer.

yThe drain must be installed in accordance with

any applicable local codes and regulations.

yMake sure that the water lines are not stretched,

pinched, crushed, or kinked.

Using a standpipe

Clip the end of the hose into the elbow bracket.

- Connect the elbow bracket within 4 inches (10 cm) from the end of the drain hose. If the drain hose is extended more than 4 inches (10 cm) beyond the end of the elbow bracket, mold or microorganisms could spread to the inside of the washer.

No more than 4 inches (10 cm)

Elbow bracket

Using a laundry tub

Clip the end of the hose into the elbow bracket.

- Connect the elbow bracket within 4 inches (10 cm) from the end of the drain hose. If the drain hose is extended more than 4 inches (10 cm) beyond the end of the elbow bracket, mold, or microorganisms could spread to the inside of the washer.

No more than 4 inches (10 cm)

Elbow bracket

Hang the end of the drain hose over the side of

the laundry tub.

Elbow Bracket

Drain Hose

Use a tie strap to secure the drain hose in place.

ENGLISH

Insert the end of the drain hose into the

standpipe.

Elbow Bracket

Drain Hose

Use a tie strap to secure the drain hose in place.

INSTALLATION INSTRUCTIONS

Leveling the washing machine

The washer tub of your new washing machine spins at very high speeds. To minimize vibration, noise, and unwanted movement, the floor must be perfectly level and solid.

Check the washing machine’s level.

- Check the precise level by rocking the top edges of the washing machine or placing a level on the washing machine. The slope beneath the washing machine must not exceed 1°, and all four leveling feet must rest firmly on the floor.

Turn the lower leveling feet clockwise to level the

washing machine.

- Turning the lower leveling feet clockwise raises the washing machine.

Raise

Turn the locknuts counterclockwise and tighten

them when the washing machine is level.

Level

1°

Check the washing machine’s level again.

- Push or rock the top edges of the washing machine gently to make sure that the washing machine does not rock.

- If the washing machine rocks, repeat steps 1 to 3.

WARNING

yUsing the washing machine without leveling,

it may result in malfunction caused by the production of excess vibration and noise.

yIf you are installing the washing machine on the

optional pedestal, you must adjust the leveling feet on the pedestal to level the washing machine. The washing machine´s leveling feet should be minimized and turn the locknuts counterclockwise to secure.

yUse the leveling feet only when you level the

washing machine.

unnecessarily, it may cause abnormal vibration of the washing machine.

If you raise the leveling feet

Using non-skid pads (optional)

If you install the washing machine on a slippery surface, it may move because of excessive vibration. Incorrect leveling may cause malfunction through noise and vibration. In the event of this, lay the nonskid pads under the leveling feet and adjust the level.

Clean the floor to attach the non-skid pads.

- Use a dry rag to remove and clean foreign objects or moisture. If moisture remains, the non-skid pads may slip.

Adjust the level after placing the washing machine

in the installation area.

Place the adhesive side of the non-skid pad on

the floor.

- It is most effective to install the non-skid pads under the front legs. If it is hard to place the pads under the front legs, place them under the back legs.

This side up

Tighten all 4 lock

nuts securely using

the wrench.

Adhesive side

Remove backing

Check the washing machine’s level again.

- Push or rock the top edges of the washing machine gently to make sure that the washing machine does not rock. If the washing machine rocks, level the washing machine again.

INSTALLATION INSTRUCTIONS

Plugging in the power cord and grounding

Make sure to ground the washing machine to prevent a short circuit or an electric shock when plugging in.

Using a 3-prong outlet

Plug in the electrical outlet without additional grounding.

WARNING

yThe power outlet must be within 60 inches (1.5 m) of

either side of the washer.

yThe appliance and outlet must be positioned so that the

plug is easily accessible.

yDo not overload the outlet with more than one

appliance.

yThe outlet must be grounded in accordance with

current wiring codes and regulations.

yTime-delay fuse or circuit breaker is recommended. yIt is the personal responsibility and obligation of the

product owner to have a proper outlet installed by a qualified electrician.

yDo not use a worn or damaged power cord or power

plug. Replace or repair it immediately.

do so may result in death, fire, electric shock, or malfunction.

yDo not modify the power cord and take care not to

damage it when installing or moving the washing

Failure to do so may result in death, fire,

machine.

electric shock, or malfunction.

yMake sure that the washing machine is grounded. yConnect this washing machine to a grounded outlet

conforming to the rating prior to use.

may result in fire, electric shock, or malfunction.

yDo not use adaptors or extension cords.

machine should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating plate. Failure to do so may result in fire, electric shock or disorder.

yDo not damage or cut off the ground prong of the

power cord.

shock, or product malfunction.

Doing so may cause death, fire, electric

Failure to

Failure to do so

The washing

Test run

Check if the washing machine is properly installed and run a test cycle.

Load the washing machine with 6 pounds of

laundry.

Press .

Turn to RINSE + SPIN.

Press .

- The wash cycle starts.

Check if water is supplied, that the washing

machine does not rock or vibrates excessively, and that it drains well during the spin cycle.

- If water leaks during water supply, see page 16,

Connecting the water lines

properly.

- If the washing machine rocks and vibrates excessively, see page 18,

to level it again.

machine

- If the drain does not work, see page 17,

Connecting the drain line

to connect them

Leveling the washing

to install it properly.

ENGLISH

PREPARATION

Sorting wash loads

Precautions for fabric care before wash cycle

Read and observe the following to prevent shrinkage or damage to clothes.

 Check all pockets to make sure that they are

empty.

- Items such as clips, matches, pens, coins, and keys can damage both your washer and your clothes.

 Close zippers, hooks, and drawstrings to prevent

these items from snagging or tangling on other clothes.

 Pretreat heavily stained areas before washing.

- Doing so will produce clean, stain-free results.

 Combine large and small items in a load. Load

large items first.

 Large items should not be more than half of the

total washload.

 The washer can be fully loaded, but the drum

should not be tightly packed with items.

-The door of the washer should close easily.

 Do not wash single items, except for bulky items

such as blankets. Make sure to wash laundry in similar types of loads.

- Washing a single small item may result in the tub becoming unbalanced, vibrating and making a noise.

 Do not wash waterproof clothes.

- This may cause abnormal vibration, or may

cause the load to bounce, which could damage the tub.

 Check if there are any other foreign objects in the

door seal and take extra care that clothes do not get caught there.

- Foreign objects in the door seal may stain clothes, and water may leak if clothes get caught in the door seal.

 Wash underwear or small, light items in a laundry

net.

- Small, light items may get caught in the door seal, and a brassiere hook may damage other items or the tub.

 Brush heavy soil, dust, or hair off fabrics before

washing.

- Laundry may not wash clean if there is dirt or sand on the fabrics, or they may damage due to particles rubbing against sheer fabrics.

 Wash blankets individually.

- Washing more than one blanket together may result in poor cleaning performance due to tangling or an unbalanced load.

 Always separate fabrics according to their colors

and wash them separately to prevent colors from running.

- Fabrics may damage or become stained due to

fabric dyes running, or due to foreign objects transferring from one fabric to another.

PREPARATION

Fabric care labels

Most articles of clothing feature fabric care labels that include instructions for proper care.

Category Label Directions

Hand Wash

Machine Wash, Normal Cycle

Use Permanent Press/Wrinkle Resistant washing machine setting (which has a cool down or cold spray before the reduced spin)

Washing

Water Temperature

Bleach symbols

Use Gentle/Delicate washing machine setting (slow agitation and/ or reduced wash time).

Do Not Wash

Do Not Wring

Hot

Warm

Cold/Cool

Any Bleach (When Needed)

Only Non-Chlorine Bleach (When Needed)

Do Not Bleach

Sorting laundry

It is recommended that you sort laundry into similar loads that are washable in the same cycle. Refer to the following chart for sorting clothes.

Colors Soil Fabric Lint

Whites / Lights / Darks

Heavy / Normal / Light

Delicates / Easy Care / Sturdy Cottons

Lint Producers / Lint Collectors

Using the detergent dispenser lid

Opening the lid

- Push the front handle to slide the lid open.

Closing the lid

- Pull the top of the handle to slide the lid closed.

WARNING

yTo avoid injury, do not place fingers under the

lid or between the lid and the top plate when pressing or sliding the detergent dispenser lid open or closed.

ENGLISH

PREPARATION

Using detergent/fabric softener

Recommended detergent

Make sure to use HE (High-Efficiency) detergent for front-loading washing machines. HE detergents dissolve more efficiently and produce fewer suds to ensure efficient washing and rinsing. Use the correct amount of detergent as indicated on the label of the detergent packaging.

Designed specially to use only HE (High-Efficiency) detergent

NOTE

yOnly use HE detergents, because using a

regular detergent may produce excessive suds.

yHE detergents produce fewer suds, dissolve

more efficiently to improve washing and rinsing performance, and help to keep the interior of your washer clean.

yUse less detergent for soft water.

yWipe up any spills immediately, as liquids could

damage the finish and the control panel of the washing machine. If you do not wipe up any spills with a soft cloth, the cycle and option selections of the control panel may not operate.

yUsing too much detergent can cause a build-

up in the tub resulting in unsatisfactory performance and machine malfunction.

yIf you use a detergent that does not dissolve

easily or a detergent with high viscosity, it will leave a residue and clog on the dispenser.

yDilute concentrated detergents with water; it

will leave a residue on the tub and may not rinse properly.

Loading the dispenser

The detergent dispenser of the washing machine has a dispenser compartment for each detergent type. Add each detergent to its appropriate compartment.

Slide the detergent dispenser lid open.

Add each detergent to its appropriate

compartment.

- If you use a liquid detergent, make sure the liquid detergent cup is in place.

- If you use a powdered detergent, remove the liquid detergent cup and put the powder in the main wash detergent compartment.

MAX

NORMAL

Liquid

chlorine

bleach

compartment

Liquid fabric softener compartment

Liquid detergent cup

Detergent dispenser cover

MAX

NORMAL

Main wash

detergent

compartment

Pre-wash detergent compartment

NOTE

y Slide the detergent dispenser lid completely

closed before starting the cycle.

yBe careful not to catch your hand when opening

and closing the lid.

yIt is normal for a small amount of water to

remain in the dispenser compartments at the end of the cycle.

PREPARATION

Pre-Wash Detergent Compartment

Add liquid or powdered detergent to this compartment when using the pre-wash option. Always use HE (High-Efficiency) detergent with your washing machine.

NOTE

yIf liquid detergent is to be used for the main

wash when using the pre-wash option, the liquid detergent cup accessory must be used in main wash dispenser to prevent the main wash liquid detergent from being dispensed immediately.

yThe amount of detergent added for the pre-

wash option is 1⁄2 the amount recommended for the main wash cycle. For example, if the main wash cycle requires one measure of detergent, add 1⁄2 measure for the pre-wash option.

Main Wash Detergent Compartment

This compartment holds laundry detergent for the main wash cycle, which is added to the load at the beginning of the cycle. Always use HE (HighEfficiency) detergent with your washing machine. Never exceed the manufacturer’s recommendations when adding detergent. Using too much detergent can result in detergent buildup in clothing and the washer. Either powdered or liquid detergent may be used.

NOTE

yLiquid or powdered color-safe bleach may be

added to the main wash compartment with detergent of the same type.

yWhen using liquid detergent, make sure the

liquid detergent cup and insert are in place. Do not exceed the maximum fill line.

yWhen using powdered detergent, remove

the insert and liquid detergent cup from the compartment. Powdered detergent will not dispense with the liquid detergent cup and insert in place.

Liquid Bleach Compartment

This compartment holds liquid chlorine bleach, which will be dispensed automatically at the proper time during the wash cycle.

NOTE

yDo not add powdered or liquid color-safe bleach

to this compartment.

yAlways follow the manufacturer’s

recommendations when adding bleach. Do not exceed the maximum fill line. Using too much bleach can damage fabrics.

yNever pour undiluted liquid chlorine bleach

directly onto the load or into the drum. Fabric damage can occur.

Fabric Softener Compartment

This compartment holds liquid fabric softener, which will be automatically dispensed during the final rinse cycle.

NOTE

yAlways follow the manufacturer’s

recommendations when adding fabric softener. Do not exceed the maximum fill line. Using too much fabric softener may result in stained clothes.

yDilute concentrated fabric softeners with warm

water. Do not exceed the maximum fill line.

yNever pour fabric softener directly onto the load

or into the drum.

ENGLISH

USING YOUR WASHING MACHINE

Basic operation

Load the laundry into the washing machine and close the door.

Press .

- The lights around the cycle selector knob will illuminate and a chime will sound.

Turn to the desired cycle.

- The proper default option is automatically set according to the wash cycle. See page 25,

- See page 26,

- To change the options, press the option button and select the desired option.

- Skip to step 4 to use the default setting without changing the options.

Add the proper amount of detergent and additional products (bleach, softener) into the dispensers.

- See page 22,

Press

- The washing machine starts.

When the melody plays, the wash cycle is finished.

- When the washing cycle is finished, the door unlocks. Open the door and

- Make sure to check around the door seal when taking out the finished load.

Cycle guide

See page 28,

remove the laundry immediately.

Small items may be caught in the door seal.

, for more detailed default options for each cycle.

Main cycle

Setting options before cycle

Using detergent/fabric softener

, for details on the wash cycles.

, for more details on options.

, for more details on using detergent.

WARNING

yTo reduce the risk of fire, electric shock, or injury to persons,

before operating this appliance.

read the IMPORTANT SAFETY INSTRUCTIONS

NOTE

yThe front-load washing machine rotates the laundry in a way that allows it to use less water while still

fully saturating your clothing. It is normal to not be able to see water during the wash cycle.

yIf the temperature or the water level inside the machine is too high, the door locks and cannot be opened.

To open the door while washing, use the Rinse + Spin feature.

USING YOUR WASHING MACHINE

Cycle guide

The cycle guide below shows the options and recommended fabric types for each cycle.

Cycle Fabric Type

Bright Whites

Allergiene

Sanitary Heavily soiled

Bedding Large items such as

Heavy Duty

Normal Cotton, linen,

Sportswear Active sports,

Perm.Press Dress shirts/pants,

Delicates

Towels

Speed Wash

Rinse + Spin Rinse, drain and

Tub Clean This cycle is

Downloaded

* Default: Small

Load

White Fabrics 72 ~ 85

™

Cotton, underwear, pillow covers, bed sheets, baby wear

underwear, work clothes, diapers, etc.

blankets and comforters

Heavily soiled Cotton Fabrics

towels, shirts, sheets, jeans, mixed loads

exercise clothing

wrinkle-free clothing, poly/ cotton blend clothing, tablecloths

Dress shirts/ blouses, nylons, sheer or lacy garments

Towels 61 ~ 74 Hot

Lightly soiled clothing and small loads

spin only

designed to remove a mildewy or musty smell.

Normally soiled and small loads.

Display

Time(min)

(Option :

Default)

103 ~ 138

116 ~ 129

62 Hot

89 ~ 132 Extra Hot

26 ~ 53 Extra Hot

37 ~ 47 Hot

41 Warm

93 ~ 95

49 ~ 51 Hot

Basic Option (=Default) Additional Options

Wash

Temp.

Hot

Warm

Cold

Tap Cold

Extra Hot

Warm

Cold

Tap Cold

Hot

Warm

Cold

Tap Cold

Hot

Warm

Cold

Tap Cold

Warm

Cold

Tap Cold

Warm

Cold

Tap Cold

Cold

Tap Cold

Warm

Cold

Tap Cold

Hot

Warm

Cold

Tap Cold

Cold

Warm

Cold

Tap Cold

Spin

Speed



Extra High

High

Medium

Low

No Spin

Extra High

High

Medium

Low

No Spin



Extra High

High

Medium

Low

No Spin

Medium



Low

No Spin

Extra High

High



Medium

Low

Extra High

High



Medium

Low



Medium

Low

No Spin

High



Medium

Low

Medium



Low

No Spin

Extra High



High

Medium

Low

No Spin



Extra High

High

Medium

Low

No Spin



Extra High

High

Medium

Low

No Spin

Extra High



High

Medium

Low

No Spin

Soil

Level

Heavy

Normal

Light

Heavy

Normal

Light

Heavy

Normal

Light

Heavy

Normal

Light

Heavy

Normal

Light

Heavy

Normal

Light

Heavy

Normal

Light

Heavy

Normal

Light

Heavy

Normal

Light

Heavy Normal Light

Heavy

Normal

Light



Cold

Steam

Wash™

    

   

    

     

    

   

    

   

 

   



= Available option

Delay

Extra

Wash

Rinse

 

Pre

Wash

Turbo

Wash™

ENGLISH

Cycle time depends on type and amount of load and detergent,water pressure and chosen additional options.

- If the Turbo Wash™ option is on, you cannot select No Spin as your Spin. (If the Turbo Wash™ option is off, you can select No Spin as your Spin.)

USING YOUR WASHING MACHINE

Main cycle

You can wash laundry items more thoroughly by selecting the wash cycle that best suits the type of items to be washed. Turn the cycle. When you select a wash cycle, the light for the corresponding wash cycle will turn on. See page 24,

Basic operation

methods.

For white fabrics,

This cycle is for washing white items only.

, for more details on operating

Bright Whites™

Reduce laundry allergen,

This cycle is a powerful, high temperature cycle designed specifically to reduce certain allergens.

NOTE

ySelecting the Allergiene™ cycle automatically

incorporates steam into the wash cycle.

yThe Allergiene™ cycle can significantly reduce

allergens in bedding and clothing.

yThe Allergiene™ cycle helps reduce dust mite

populations and helps reduce allergens.

yDue to the higher energy and temperatures

used, the Allergiene™ cycle is not recommended for wool, silk, leather, or any

other delicate or temperature sensitive items

Reduce laundry bacteria,

This wash cycle reduces 99% of bacteria on laundry through high temperature.

Sanitization Performance of Residential and Commercial, Family Sized Clothes Washers

NOTE

yThis cycle has been certified by NSF using Tide

HE powder.

Protocol P172

Blankets or bulky items,

This cycle is for washing blankets or bulky items.

Heavily soiled items,

This cycle is for washing heavily soiled laundry though more powerful tub rotation.

Heavy Duty

to the desired

Allergiene™

Sanitary

Bedding

Normal items,

Use this cycle to wash all normal items, except delicate fabrics such as wool or silk.

NOTE

yIf you press

another cycle, the washing machine proceeds to Normal.

For Sportswear,

Use this cycle for garments that are specially designed and treated for sport.

Wrinkle free items,

This cycle is for washing items such as wrinkle-free clothes or tablecloths to minimize wrinkles.

Sheer items,

This cycle is for washing lingerie or sheer and lacy clothes which can easily be damaged.

For towels,

This cycle is for washing towels.

Quick wash,

Use the Speed Wash cycle to quickly wash lightly soiled clothing and small load. For high wash and rinse efficiency, it is recommended to wash small loads of 2-3 lightly soiled garments.

NOTE

yUse very little detergent in this cycle. If you

want more rinsing, you can add an extra rinse by using the Extra Rinse option button.

Normal

and then without selecting

Sportswear

Perm.Press

Delicates

Towels

Speed Wash

Rinse, drain and spin only,

Rinse + Spin

This cycle is for rinsing detergent from the load.

Downloading cycles,

For downloadable cycles. The default cycle is Small Load. (See page 33.)

Downloaded

USING YOUR WASHING MACHINE

Cycle modifier buttons

Each cycle has preset settings that are selected automatically. You may also customize the settings using the cycle modifier buttons. Press the button for that option to view and select other settings. The washer automatically adjusts the water level for the type and size of wash load for best results and maximum efficiency. It may seem there is no water inside the drum in some cycles, but this is normal.

NOTE

yTo protect your garments, not every wash/rinse

temperature, spin speed, soil level, or option is available with every cycle. See the Cycle Guide for details.

Setting the water temperature,

Set the water temperature for the wash cycle. Set the appropriate temperature, as specified in the fabric care label.

Press and turn to the desired cycle.

Press repeatedly to select the desired

water temperature:

- When an optional item is selected, an indication light for the corresponding optional item turns on.

Press the desired option button to use the other

options.

- Skip to step 4 to use the default setting without changing the options.

Press .

Temp.

NOTE

yCold rinses use less energy. yYour washer features a heating element to

boost the hot water temperature for Extra Hot settings. This provides improved wash performance at normal water heater settings.

ySelect the water temperature suitable for the

type of load you are washing. Follow the fabric care label for best results.

Setting spin speed, Spin

You can set the desired spin speed. Use this feature properly according to the characteristics of the load.

Press and turn to the desired cycle.

Press repeatedly to select the desired spin

speed.

- When an optional item is selected, an indication light for the corresponding optional item turns on.

Press the desired option to use the other options.

- Skip to step 4 to use the default setting without changing the options.

Press .

NOTE

yThe Spin button also activates the Drain&Spin

cycle to drain the tub and spin clothes; for example, if you want to remove clothes before the cycle has ended.

yTo use Drain&Spin, press the Power button,

then press the Spin button repeatedly to select a spin speed. Press the Start/Pause button to begin.

Setting soil level of laundry,

You can wash your laundry more thoroughly by setting the proper soil level on the washing machine.

Press and turn to desired cycle.

Press repeatedly to select a soil level.

- When an optional item is selected, an indication light for the corresponding optional item turns on.

Press the desired option to use the other options.

- Skip to step 4 to use the default setting without changing the options.

Press .

Soil

NOTE

yThis feature needs more time for heavily soiled

loads or less time for lightly soiled loads.

ENGLISH

USING YOUR WASHING MACHINE

Adjusts the melody and button tones,

Signal

The washing machine plays a melody when the wash cycle is finished. The buttons make a sound each time a button is pressed. The volume of the melody and button tones can be changed or turned off as desired.

Press

Turn

Press

as desired.

Press the desired option to use the other options.

Press

to the desired cycle.

. Adjust the melody and button tones

Setting options before cycle

You can select and add the desired optional functions before you start the washing machine.

High temperature,

Adding the Steam option to these cycles helps to enhance washing performance. By using hot steam fabrics get the cleaning benefits of a super hot wash.

Press and turn to the desired cycle.

Press . The washer will automatically adjust

the cycle settings.

Set any other desired options.

Press .

Steam

WARNING

yDo not touch the door during steam cycles.

door surface can become very hot. Allow the door lock to release before opening the door.

yDo not attempt to override the door lock

mechanism or reach into the washer during a steam cycle.

Steam can cause severe burns.

The

NOTE

The steam option cannot be used with all cycles.

y Steam may not be clearly visible during the

steam cycles. This is normal. Too much steam could damage clothing.

yDo not use steam with delicate fabrics such as

wool, silk, or easily discolored fabrics.

Lower energy costs,

The smart appliance can communicate with local utility companies that are equipped with Smart Grid equipment. (See page 32).

Smart Grid

Control the appliance remotely,

Remote Start

Use a smart phone to control the appliance remotely. Or, monitor the cycle operation to see how much time is left in the cycle. (See page 32).

USING YOUR WASHING MACHINE

Presetting the start time, Delay Wash

Set the desired start time.

Press and turn to the desired cycle.

Press the desired option to use the other options.

Press repeatedly to select the desired start

time.

light will turn on.

- The set start time appears on the display panel.

- Each press of the button increases the delay time by one hour, up to 19 hours.

Press .

Selecting your customized cycle,

Custom PGM

Recall a customized wash cycle that was previously saved.

To recall a cycle

Press after then press .

Press .

You can save a cycle with all the settings and options you use most frequently.

Saving time, Turbo Wash™

Adding the Turbo Wash™ option reduces cycle time and provides good performance in normal cycle. Using Turbo Wash™ saves time without sacrificing performance.

Press and turn to the desired cycle.

Press

adjust the cycle settings.

Set any other desired options.

Press

. The washer will automatically

NOTE

y The Turbo Wash™ option cannot be used with

all cycles.

yThe option is selected by default on the

Normal, Heavy Duty, and Perm. Press cycles.

Saving energy, Cold Wash

Adding the Cold Wash option reduces energy usage and provides the same washing performance as a warm water wash. By using 6 different washing motions (Tumbling, Rolling, Stepping, Scrubbing, Swing, Filtration), fabrics get the cleaning benefits, without the energy usage.

Press and turn to the desired cycle.

Press

adjust the cycle settings.

Set any other desired options.

Press

. The washer will automatically

NOTE

When you select the Cold Wash option, wash time will be increased up to 5 - 20 minutes.

yFor high wash efficiency, it is recommended to

use less than 8 pounds.

Adding extra rinse cycle, Extra Rinse

Add an extra rinse cycle to the default rinse cycle.

Press and turn to the desired cycle.

Press .

light will turn on.

Press the desired option to use the other options.

- Skip to step 4 to use the default setting without changing the options.

Press .

Prewashing,

Pre-wash for 15 minutes when clothes are covered in dirt or dust. This feature is suitable for heavily soiled items.

Press and turn to the desired cycle.

Press .

Press the desired option to use the other options.

- Skip to step 4 to use the default setting without changing the options.

Pre Wash

light will turn on.

ENGLISH

Press .

+ 67 hidden pages

LG WM5000H A Series Owner's Manual

Specifications and Main Features

Frequently Asked Questions

User Manual