LG WM20VVS6 Owner's manual

RELEASING THIS DRAWING

mfl68639783

WITHOUT PERMISSION LG Electronics SHOULD BE ACCUSED ACCORDING TO THE LAWS AND COMPANY RULES.

이 도면은 LG전자의 자산으로 불법 유출시 관계법과 회사규정에 의해 처벌됨.

WORK

SEC.

257+/-3

BRAND

<BACK>

MODEL

F1K2CS2W F1K2CS2T

<FRONT>

P/NO.

MFL68639784

12 +/-2

PRINTING DEGREE

MATERIAL AND PRINTING DESCRIPTION

내지:SNOW WHITE 80g OFFSET 인쇄

F1K2CSV2*

외지:SNOW WHITE 150g OFFSET 인쇄

<< NOTES >>

1. Material, printing and exterier size are refer to work tables.

2. Printing, text size and line are based on LG design film.

3. Exterier size on the drawing is cutting line.

4. Before product controlled by criteria sample.

5. The part should not contain prohibited substances(Pb,Cd,Hg,Cr+6,PBB,PBDE)and details

LG MODEL Name

SUFFIX

A**QPOR

LANGUAGE

ENGLISH+ PORTUGAL

PAGE

101

REMARK

VICTOR 1399

182+/-3

Update Manual of Victor 999 Colombia

17/02/11EDXH200072

182+/-3

<FRONT>

182+/-3

DM.KIMHA.NGUYEN

APPROVEDPREPAREDDATEREF. NO.REV. NO. REVISION DESCRIPTION

12 +/-2

should comply with LG standard of LG(63)-A-5501-34

TRIG.

MODELING

LG 전자 (주)

LG Electronics Inc.

UNIT SCALE

REVIEWEDDESIGNED

N.V.HA

17.04.01 17.04.01 17.04.01

D.J.LEE

17.04.01

CHECKED APPROVED

D.J.LEE

RELATED DWG.

DM.KIM

I T L E

DWG. No.

MANUAL,OWNER’S

MFL68639784

PDF

ILLUSTRATOR

VICTOR 999

DR COMPLETED

도면 DR 완료

완료일 :

16.04.01

1/1

OWNER’S MANUAL

WASHING

ENGLISH

ESPAÑOL

MACHINE

Before beginning installation, read these instructions carefully. This will simplify installation and ensure that the product is installed correctly and safely. Leave these instructions near the product after installation for future reference.

68639784

ver071217.00

TABLE OF CONTENTS

SAFETY INSTRUCTIONS ......................................03

Important Safety Instructions ............................................................... 05

INSTALLATION .......................................................08

Parts ....................................................................................................08

Accessories Specifications Installation Place Requirements Unpacking and Removing Shipping Bolts Using

Anti–Slip Sheets Wooden Floors (Suspended Floors) Leveling the Washing Machine Connecting Inlet Hose Installation of Drain Hose

This manual is produced for a group of products and may contain images or content different from the model you purchased.

This manual is subject to revision by the manufacturer.

.........................................................................................08

......................................................................................09

.......................................................... 10

........................................... 11

(Optional) ........................................................12

....................................................12

............................................................ 13

.........................................................................13

....................................................................16

OPERATION ...........................................................17

Using the Washing Machine ................................................................17

Sorting Iaundry Adding Cleaning Products Control Panel Programme Table Option Cycle

....................................................................................18

................................................................... 19

....................................................................................... 21

................................................................................22

........................................................................................ 26

SMART FUNCTIONS...............................................30

Using LG SmartThinQ Application .......................................................30

Using Smart Diagnosis™ .....................................................................31

MAINTENANCE ......................................................32

Cleaning your Washing Machine .........................................................32

Cleaning the Water Inlet Filter .............................................................32

Cleaning the Drain Pump Filter ...........................................................33

Cleaning the Dispenser Drawer...........................................................34

Limpieza de Tina (Tub Clean) .............................................................34

Caution on Freezing During Winter .....................................................35

TROUBLESHOOTING ............................................37

Diagnosing Problems ..........................................................................37

Error Messages ...................................................................................40

ENGLISH

SAFETY INSTRUCTIONS

The following safety guidelines are intended to prevent unforeseen risks or damage from unsafe or incorrect operation of the product.

The guidelines are separated into ‘WARNING’ and ‘CAUTION’ as described below.

This symbol is displayed to indicate matters and operations that can cause risk. Read the part with this symbol carefully and follow the instructions in order to avoid risk.

WARNING

can cause serious injury or death.

CAUTION

can cause the minor injury or damage the product.

- This indicates that the failure to follow the instructions

WARNING

To reduce the risk of re, electric shock, or injury to persons when using

your product, basic safety precautions should be followed, including the following.

CHILDREN IN THE HOUSEHOLD

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

For use in Europe:

This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

Children of less than 3 years should be kept away unless continuously supervised.

GROUNDING REQUIREMENTS

WARNING

For your safety, the information in this manual must be followed to

minimize the risk of re, explosion, or electric shock, or to prevent

property damage, injury to persons, or death.

This appliance must be grounded. In the event of malfunction or breakdown, grounding

•

will reduce the risk of electric shock by providing a path of least resistance for electric current.

This appliance is equipped with a cord having an equipment-grounding conductor and

•

grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

Improper connection of the equipment-grounding conductor can result in risk of electric

•

shock. Check with a qualified electrician or service person if ou are in doubt as to whether the appliance is properly grounded.

Do not modify the plug provided with the appliance. If it does not fit the outlet, have

•

proper outlet installed by a qualified electrician

Important Safety Instructions

WARNING

To reduce the risk of re, electric shock, or injury to persons when using

your product, basic safety precautions should be followed, including the following.

Installation

Never attempt to operate this appliance

•

if it is damaged, malfunctioning, partially disassembled, or has missing or broken parts, including a damaged cord or plug. It can cause electric shock or injury.

This appliance is heavy. Two or more

•

people may be needed to install and move the appliance. Failure to do so can result in injury.

Store and install this appliance where

•

it will not be exposed to temperatures below freezing or exposed to outdoor weather conditions. Failure to do so can result in leakage.

Tighten the drain hose to avoid

•

separation. Splashing of water may cause electric shock.

Operation

Do not use a sharp object like drill or pin

•

to press or separate an operation unit. It can cause the electric shock or injury.

Only an authorized repair person from

•

LG Electronics service centre should disassemble, repair, or modify the product. Improper service may cause injury, electric shock or fire

Do not spray the water inside or outside

•

the product to clean it. Water can damage the insulation, causing electric shock or fire

Keep the area underneath and around

•

your appliances free of combustible materials such as lint, paper, rags, chemicals, etc. Improper use can cause fire or explosion

If the supply cord is damaged, it must

•

be replaced by the manufacturer or its service agents or similarly qualifie person in order to avoid a hazard.

The appliance must not be installed

•

behind a lockable door, a sliding door or a door with a hinge on the opposite side to that of the tumble dryer, in such a way that a full opening of the tumble dryer door is restricted. The washing machine shall not be installed at a humid place.

Do not put living animals, such as pets

•

into the product. It may cause injury.

Do not leave this appliance door open.

•

Children may hang on the door or crawl inside the appliance, causing damage or injury.

Never reach into this appliance while

•

it is operating. Wait until the drum has completely stopped. Failure to do so may result in injury.

Do not put in, wash or dry articles that

•

have been cleaned in, washed in, soaked in, or spotted with combustible or explosive substances (such as wax, oil, paint, gasoline, degreasers, drycleaning solvents, kerosene, vegetable oil, cooking oil, etc.). Improper use can cause fire or explosion

In case of flood, stop using the produc

•

and contact the LG Electronics service centre. Contact with water can cause electric shock.

Do not push down the door excessively,

•

when the appliance door is open. Doing so may topple over the appliance and it can cause the injury.

Use new hose-sets supplied with the

•

appliance. Old hose-sets should not be reused. Water leakage may cause property damage.

Do not touch the door during steam

•

cycles, drying or high-temperature washing. The door surface can become very hot. Allow the door lock to release before opening the door. Failure to do so may result in injury.

Do not use inflammable gas an

•

combustible substances (benzene, gasoline, thinner, petroleum, alcohol, etc.) around the product. It may cause explosion or fire

If the drain hose or inlet hose is frozen

•

during winter, use it only after thawing. Freezing may cause fire or electri shock, and frozen parts may cause product malfunction or reduction in product life span.

Keep all washing detergents, softener

•

and bleach away from children. These products contain poisonous materials.

Do not plug multiple products into

•

multiple socket-outlets or extension cords. This can cause fire

Remove the power plug when you clean

•

the product. Not removing the plug may result in electric shock or injury.

Do not touch the power plug with wet

•

hands. It can cause the electric shock or injury.

When pulling out the power plug from

•

an outlet, hold the power plug, not the cable. Damage of the cable can cause the electric shock or injury.

Do not bend the power cable

•

excessively or place a heavy object on top of it. Damage of the power cable can cause electric shock or fire

Technical Safety for Using the Tumble Dryer

Do not dry unwashed items in the

•

appliance.

Items that have been soiled with

•

substances such as cooking oil, vegetable oil, acetone, alcohol, petrol, kerosene, spot removers, turpentine, waxes and wax removers should be washed in hot water with an extra amount of detergent before being dried in the appliance.

Fabric softeners or other similar

•

products should be used according to the fabric softener instructions.

Remove all objects from pockets such

•

as lighters and matches.

Disposal

Before discarding an old appliance,

•

unplug it. Render the plug useless. Cut off the cable directly behind the appliance to prevent misuse.

Dispose of the packaging material (such

•

as vinyl and styrofoam) away from children. The packaging material can suffocate a child.

Remove the door to the washing

•

compartment before this appliance is removed from service or discarded to avoid the danger of children or small animals getting trapped inside. Failure to do so can result in serious injury to persons or death.

Never stop this appliance before the

•

end of the drying cycle unless all items are quickly removed and spread out so that the heat is dissipated.

This appliance is not to be used if

•

industrial chemicals have been used for cleaning.

Items such as foam rubber (latex foam),

•

shower caps, waterproof textiles, rubber backed articles and clothes or pillows fitted with foam rubber pads should no be dried in this appliance.

INSTALLATION

Parts

Transit bolts

Power plug

Drawer

Control panel

Drum

Door

Drain hose

Drain plug

Drain pump filte

Cover cap (Location may

vary depending on products)

Adjustable feet

Accessories

Inlet hose (1EA)

(Option : Hot & cold (2EA))

Anti–slip sheets (2EA)

(Optional)

Spanner Elbow Bracket

(for securing drain hose)

Caps for covering shipping bolt holes Tie strap

Model WM20VVS6 WM22VVS6

Wash Capacity 20 kg 22 kg

ENGLISH

Power Supply

Size

Product Weight

Max. Watt

Permissible Water pressure

Appearance and specifications may change without notice to improve the quality of the product

•

700 mm (W) x 770 mm (D) x 990 mm (H)

0.1 - 1.0 MPa (1.0 - 10.0 kgf / cm²)

120 V~, 60 Hz

92 kg

1,100 W

Installation Place Requirements

Location

0.5 cm

2 cm10 cm

Level oor :

machine is 1°. Power outlet : Must be within 1.5 meters of either side

of the location of the washing machine.

Do not overload the outlet with more than one

•

appliance.

Additional Clearance : For the wall, 10 cm: rear /2 cm: right & left side

Do not place or store laundry products on top of the

•

washing machine at any time. These products may damage the finish or controls

•

Allowable slope under the entire washing

Positioning

Install the washing machine on a flat hard flo .

•

Make sure that air circulation around the washing

•

machine is not impeded by carpets, rugs, etc. Never try to correct any unevenness in the floor with

•

pieces of wood, cardboard or similar materials under the washing machine.

If it is impossible to avoid positioning the washing

•

machine next to a gas cooker or coal burning insulation (85x60 cm) covered with aluminum foil on the side facing the cooker or stove must be inserted between the two appliances.

2 cm

Do not install your washing machine in rooms where

•

freezing temperatures may occur. Frozen hoses may burst under pressure. The reliability of the electronic control unit may be impaired at temperatures below freezing point.

Please ensure that when the washing machine is

•

installed, it is easily accessible for an engineer in the event of a breakdown.

With the washing machine installed, adjust all four feet

•

using the transit bolt spanner provided to ensure the appliance is stable, and a clearance of approximately 5 mm is left between the top of the washing machine and the underside of any work-top.

This equipment is not designed for maritime use or for

•

use in mobile installations such as caravans, aircraft etc.

Electrical Connection

Do not use an extension cord or double adapter.

•

Always unplug the washing machine and turn off the

•

water supply after use. Connect the washing machine to an earthed socket in

•

accordance with current wiring regulations. The washing machine must be positioned so that the

•

plug is easily accessible. Repairs to the washing machine must only be carried

•

out by qualified personnel. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Contact your local service centre.

If the washing machine is delivered in winter and

•

temperatures are below freezing, place the washing machine at room temperature for a few hours before putting it into operation.

Unpacking and Removing Shipping Bolts

Lift the washing machine off the foam base.

After removing the carton and shipping material,

•

lift the washing machine off the foam base. Make sure the tub support comes off with the base and is not stuck to the bottom of the washing machine.

If you must lay the washing machine down to

•

remove the carton base, always protect the side of the washing machine and lay it carefully on its side. DO NOT lay the washing machine on its front or back.

Install the hole caps.

Locate the hole caps included in the accessory

•

pack and install them in the shipping bolt holes.

Cap

NOTE

•Save the bolt assemblies for future use. To prevent damage to internal components, DO NOT transport the washing machine without reinstalling the shipping bolts.

•Failure to remove shipping bolts and retainers may cause severe vibration and noise, which can lead to permanent damage to the washing machine. The cord is secured to the back of the washing machine with a shipping bolt to help prevent operation with shipping bolts in place.

Tub Support

(Optional)

Remove the bolt assemblies.

Starting with the bottom two shipping bolts, use

•

the spanner (included) to fully loosen all shipping bolts by turning them counterclockwise. Remove the bolt assemblies by wiggling them slightly while pulling them out.

Shipping

bolt

Carton base

Retainer

Using Anti–Slip Sheets (Optional)

Wooden Floors (Suspended

If you install the washing machine on a slippery surface, it may move because of excessive vibration. Incorrect leveling may cause malfunction through noise and vibration. If this occurs, install the anti–slip sheets under the leveling feet and adjust the level.

Clean the floor to attach the anti–slip sheets

Use a dry rag to remove and clean foreign

•

objects and moisture. If moisture remains, the anti–slip sheets may slip.

Adjust the level after placing the washing machine

in the installation area.

Place the adhesive side of the anti–slip sheet on

the floo .

It is most effective to install the anti–slip sheets

•

under the front legs. If it is difficult to place the pads under the front legs, place them under the back legs.

This side up

Adhesive side

Floors)

Wooden floors are particularly susceptible to vibration

•

To prevent vibration we recommend you place rubber

•

cups at least 15 mm thick of the each foot of the washing machine, secured to at least two floor beams with screws.

Rubber Cup

If possible install the washing machine in one of the

•

corners of the room, where the floor is more stable Fit the rubber cups to reduce vibration.

•

You can obtain rubber cups (p/no.4620ER4002B) from

•

the LG Service Centre.

NOTE

•Proper placement and leveling of the washing machine will ensure long, regular, and reliable operation.

•The washing machine must be 100% horizontal and stand firmly in position

•It must not ‘Seesaw’ across corners under the load.

•The installation surface must be clean, free from floor wax and other lubricant coatings

•Do not let the feet of the washing machine get wet. Failure to do so may cause vibration or noise.

Ensure the washing machine is level.

Push or rock the top edges of the washing

•

machine gently to make sure that the washing machine does not rock. If the washing machine rocks, level the washing machine again.

Leveling the Washing Machine

Connecting Inlet Hose

If the floor is uneven, turn the adjustable feet as required (Do not insert pieces of wood etc. under the feet). Make sure that all four feet are stable and resting on the floor and then check that the appliance is perfectly level (Use a spirit level).

Once the washing machine is level, tighten the lock

•

nuts up towards the base of the washing machine. All lock nuts must be tightened.

Raise

Lock Nut

Diagonal Check

•

Lower

Tighten all 4

locknuts securely

When pushing down the edges of the washing machine top plate diagonally, the washing machine should not move up and down at all (Check both directions). If the washing machine rocks when pushing the machine top plate diagonally, adjust the feet again.

Water supply pressure must be between 0.1 MPa and

•

1.0 MPa (1.0 ‒ 10.0 kgf/cm Do not strip or crossthread when connecting inlet hose

•

to the valve. If the water supply pressure is more than 1.0 MPa, a

•

decompression device should be installed. Periodically check the condition of the hose and

•

replace the hose if necessary.

Checking Rubber Seal Inlet Hose

Two rubber seals are supplied with the water inlet hoses. They are used for preventing water leaks. Make sure the connection to taps is sufficiently tight

Hose connector

Rubber seal

NOTE

•Timber or suspended type flooring may contribute to excessive vibration and unbalance.

•If the washing machine is installed on a raised platform, it must be securely fastened in order to eliminate the risk of falling off.

Hose connector

Rubber seal

Connecting Hose to Water Tap

Connecting screw-type hose to tap with thread

Screw the hose connector onto the water supply tap.

Push the adapter onto the end of the tap so that

the rubber seal forms a watertight connection. Tighten the four fixing screws

Push the inlet hose vertically upwards so that the

rubber seal within the hose can adhere completely to the tap and then tighten it by screwing it to the right.

Connecting screw-type hose to tap without thread

Loose the four fixing screws

Upper

connector

Fixing screw

Remove the guide plate if the tap is too large to fit

the adapter.

Guide plate

Rubber seal

Plate

Inlet hose

Connecting one touch type hose to tap without thread

Unscrew the adapter ring plate and loose the four

fixing screws

Ring plate

Remove the guide plate if the tap is too large to fit

the adapter.

Guide plate

Push the adapter onto the end of the tap so that

the rubber seal forms a watertight connection. Tighten the adapter ring plate and the four fixing

screws.

Pull the connector latch plate down, push the inlet

hose onto the adapter, and release the connector latch plate. Make sure the adapter locks into place.

Latch plate

Connecting Hose to Washing Machine

Make sure that there are no kinks in the hose and that they are not crushed.

When your washing machine has two valves.

The Inlet hose with the red connector is for the hot

•

water tap.

NOTE

•After completing connection, if water leaks from the hose, repeat the same steps. Use the most conventional type of tap for the water supply remove the guide plate before inserting the tap into the adaptor.

. In case the tap is square or too big,

NOTE

•After connecting the inlet hose to the water tap, turn on the water tap to flush out foreign substances (dirt, sand, sawdust, etc.) in the water lines. Let the water drain into a bucket, and check the water temperature.

Using the horizontal tap

Horizontal tap

Extension tap

Square tap

Installation of Drain Hose

The drain hose should not be placed higher than 100

•

cm above the floo . Water in the washing machine may not drain or may drain slowly.

Securing the drain hose correctly will protect the floor

•

from damage due to water leakage. If the drain hose is too long, do not force it back into

•

the washing machine. This will cause abnormal noise.

about 100 cm

about 145 cm

max. 100 cm

When installing the drain hose to a sink, secure it

•

about 105 cm

tightly with string. Securing the drain hose correctly will protect the floor

•

from damage due to water leakage.

Laundry tub

Hose

retainer

Tie strap

max. 100 cm

OPERATION

Using the Washing Machine

Before the first wash, select a cycle (Cotton 60 °C, add a half load of detergent), allow the washing machine to wash without clothing. This will remove residue and water from the drum that may have been left during manufacturing.

Sort laundry and load items.

Sort laundry by fabric type, soil level, colour and

•

load size as needed. Open the door and load items into the washing machine.

Add cleaning products and/or detergent and

softener.

Add the proper amount of detergent to the

•

detergent dispenser drawer. If desired, add bleach or fabric softener to the appropriate areas of the dispenser.

Choose the desired washing cycle.

Press the Cycle button repeatedly or turn the

•

cycle selector knob until the desired cycle is selected.

Begin cycle.

Press the Start/Pause button to begin the cycle.

•

The washing machine will agitate briefly without water to measure the weight of the load. If the Start/Pause button is not pressed within 5 minutes, the washing machine will shut off and all settings will be lost.

End of cycle.

When the cycle is finished, a melody will sound.

•

Immediately remove your clothing from the washing machine to reduce wrinkling. Check around the door seal when removing the load for small items that may be caught in the seal.

Turn on the washing machine.

Press the Power button to turn ON the washing

•

machine.

Sorting Iaundry

Look for a care label on your clothes.

This will tell you about the fabric content of your

•

garment and how it should be washed. Symbols on the care labels.

•

Wash temperature

Normal machine wash

Permanent press

Delicate

Hand wash

Do not wash

Sorting laundry.

To get the best results, sort clothes into loads

•

that can be washed with the same wash cycle. Different fabrics need to be washed at varying

•

temperatures and spin speeds. Always sort dark colours from pale colours and

•

whites. Wash separately as dye and lint transfer can occur causing discolouration of white and pale garments. If possible, do not wash heavily soiled items with lightly soiled ones.

– Soil (Heavy, Normal, Light)

Separate clothes according to amount of soil.

– Colour (White, Lights, Darks)

Separate white fabrics from coloured fabrics.

– Lint (Lint producers, Collectors)

Wash lint producers and lint collectors separately.

Caring before loading.

Combine large and small items in a load. Load

•

large items first. Large items should not be more than half the

•

total wash load. Do not wash single items. This may cause an unbalanced load. Add one or two similar items.

Check all pockets to make sure that they are

•

empty. Items such as nails, hair clips, matches, pens, coins and keys can damage both your washing machine and your clothes.

Close zippers, hooks and strings to make sure

•

that these items don’t snag on other clothes. Pre-treat dirt and stains by brushing a small

•

amount of detergent dissolved water onto stains to help lift dirt.

Check the folds of the flexible gasket (gray) and

•

remove any small articles. Check inside the drum and remove any items

•

from a previous wash.

Remove any clothing or items from the flexible

•

gasket to prevent clothing and gasket damage.

Adding Cleaning Products

Adding Detergent and Fabric Softener

Detergent Dosage

Detergent should be used according to the instruction

•

of the detergent manufacturer and selected according to type, colour, soiling of the fabric and washing temperature.

If too much detergent is used, too many suds can

•

occur and this will result in poor washing results or cause heavy load to the motor.

If you wish to use liquid detergent, follow the

•

guidelines provided by the detergent manufacturer. You can pour liquid detergent directly into the

•

main detergent drawer if you are starting the cycle immediately.

Do not use liquid detergent if you are using Time

•

delay, or if you have selected Pre Wash, as the liquid may harden.

If too many suds occur, reduce the detergent amount.

•

Detergent usage may need to be adjusted for water

•

temperature, water hardness, size and soil level of the load. For best results, avoid oversudsing.

Refer to the label of the clothes, before choosing the

•

detergent and water temperature: When using the washing machine, use designated

•

detergent for each type of clothing only:

– General powdered detergents for all types of fabric – Powdered detergents for delicate fabric – Liquid detergents for all types of fabric or

designated detergents only for wool

For better washing performance and whitening, use

•

detergent with the general powdered bleach. Detergent is flushed from the dispenser at the

•

beginning of the cycle.

Adding detergent

Main wash only →

•

Pre wash+Main wash →

•

NOTE

•Too much detergent, bleach or softener may cause an overflo .

•Be sure to use the appropriate amount of detergent.

Adding fabric softener

Do not exceed the maximum fill line. Overfill g can

•

cause early dispensing of the fabric softener, which may stain clothes. Close the dispenser drawer slowly.

NOTE

•Do not let the detergent harden. Doing so may lead to blockages, poor rinse performance or odour.

•Full load : According to manufacturer’s recommendation.

•Part load : 3/4 of the normal amount

•Minimum load : 1/2 of full load

Do not leave the fabric softener in the detergent

•

drawer for more than 2 days (Fabric softener may harden).

Softener will automatically be added during the last

•

rinse cycle. Do not open the drawer when water is being supplied.

•

Solvents (benzene, etc) should not be used.

•

NOTE

•Do not pour fabric softener directly on the clothes.

Adding water softener

A water softener, such as Anti-limescale (e.g. Calgon)

•

can be used to cut down on the use of detergent in extremely hard water areas. Dispense according to the amount specified on the packaging. First add detergent and then the water softener.

Use the quantity of detergent required for soft water.

•

Using tablet

Open the door and put tablets into the drum.

Load the laundry into the drum and close the door.

Control Panel

Power button

Press the Power button to turn the washing

•

machine on. To cancel the Delay Wash function, the Power

•

button should be pressed.

Start/Pause button

This Start/Pause button is used to start the

•

wash cycle or pause the wash cycle. If a temporary stop of the wash cycle is needed,

•

press the Start/Pause button.

Display

The display shows the settings, estimated

•

time remaining, options, and status messages. When the product is turned on, the default settings in the display will illuminate.

The display shows estimate time remaining.

•

While the size of the load is being calculated automatically, blinking appears.

or ‘Detecting’

Programme dial

Programmes are available according to laundry

•

type. Lamp will light up to indicate the selected

•

programme.

Options

This allows you to select an additional cycle

•

and will light when selected. Use these buttons to select the desired cycle

•

options for the selected cycle.

Programme Table

Washing Programme

Programme Description Fabric Type

Algodón/Normal (Normal/Cotton)

Carga Pesada

(Heavy Duty)

Voluminoso

(Bulky/Large)

Planchado

Permanente

(Perm.Press)

Toallas

(Towels)

Sanitario

(Sanitary)

Allergiene™

Provides better performance by combining various drum motions.

This cycle is for washing heavily soiled laundry though more powerful tub rotation.

This cycle is for washing blankets or bulky items.

This cycle is for washing items such as wrinkle-free clothes or tablecloths to minimize wrinkles.

This cycle is for washing towels. Towels Rating

Washes laundry in a hot cycle.

Removes allergens such as house

mites, pollen, and cat fur.

Coloured fast garments (shirts, nightdresses, pajamas, etc) and normally soiled cotton load (underwear).

Heavily soiled Cotton Fabrics

Large items such as blankets and comforters.

Dress shirts/pants, wrinkle-free clothing, poly/cotton blend clothing, tablecloths.

Cotton, underwear, pillow covers, bed sheets, baby wear

Maximum

Load

Rating

Less than

8.5 kg

1 item

Less than

8.5 kg

Less than

8.5 kg

Bright Whites™ This cycle is for washing white items only. White Fabrics

Delicados

(Delicates)

Lavado Rápido

(Speed Wash)

Limpeza de Tina

(Tub Clean)

Descargar Ciclo

(Downloaded

Cycle)

This cycle is for washing lingerie or sheer and lacy clothes which can easily be damaged.

This cycle provides fast washing time for

small loads and lightly soiled clothes.

Periodic use of this cycle helps to prevent mildew or a musty smell.

For downloadable cycles. If you did not download any cycles, the default is Small Load.

Dress shirts/blouses, nylons, sheer or lacy garments

Coloured laundry which is lightly soiled.

CAUTION : Use less than 20 g of

detergent (for 2.0 kg load) otherwise

detergent may remain on the clothes.

NOTE

•Neutral detergent is recommended.

Less than

4.5 kg

Less than

4.5 kg

ENGLISH

Extra Options

Programme

Algodón/Normal

(Normal/Cotton)

Carga Pesada

(Heavy Duty)

Voluminoso

(Bulky/Large)

Planchado

Permanente

(Perm.Press)

Toallas

(Towels)

Sanitario

(Sanitary)

Allergiene™

Reserva

(Delay Wash)

Prelavado

(Pre Wash)

Enjuague

Extra

(Extra

Rinse)

Vapor

(Steam)

Cold

Wash™

● ● ● ● ●

● ● ● ● ● ●

● ● ●

● ● ● ●

●

● ● ● ● ●

● ●

●*

Turbo

Wash™

●**

●

Bright Whites™

Delicados

(Delicates)

Lavado Rápido

(Speed Wash)

Limpeza de Tina

(Tub Clean)

Descargar Ciclo

(Downloaded

Cycle)

* : This option is automatically included in the cycle and can not be deleted. ** : This option is automatically included in the cycle and can be deleted.

● ● ● ● ●

● ● ●

● ●

●

●*

● ● ● ●

●

Operating Data

Programme Wash Temp. Spin Speed Soil Level

Algodón/Normal

(Normal/Cotton)

Carga Pesada

(Heavy Duty)

Voluminoso

(Bulky/Large)

Planchado Permanente

(Perm.Press)

Toallas

(Towels)

Más Caliente (Extra Hot)

Caliente (Hot)

Tibia* (Warm*)

Fría (Cold)

Ligeramente Fría (Tap Cold)

Caliente (Hot) Tibia* (Warm*)

Fría (Cold)

Ligeramente Fría (Tap Cold)

Caliente (Hot)

Tibia* (Warm*)

Fría (Cold)

Ligeramente Fría (Tap Cold)

Caliente (Hot)

Tibia* (Warm*)

Fría (Cold)

Ligeramente Fría (Tap Cold)

Caliente (Hot)

Tibia* (Warm*)

Fría (Cold)

Ligeramente Fría (Tap Cold)

Muy Alta (Extra High)

Fuerte* (High*)

Media (Medium)

Bajo (Low)

Muy Alta* (Extra High*)

Fuerte (High)

Media (Medium)

Bajo (Low)

Media* (Medium*)

Bajo (Low)

No Centrifugar (No Spin)

Fuerte (High)

Media* (Medium*)

Bajo (Low)

Muy Alta* (Extra High*)

Fuerte (High)

Media (Medium)

Bajo (Low)

No Centrifugar (No Spin)

Muy Sucia (Heavy)

Normal* (Normal*)

Ligero (Light)

Muy Sucia* (Heavy*)

Normal (Normal)

Ligero (Light)

Muy Sucia (Heavy)

Normal* (Normal*)

Ligero (Light)

Muy Sucia (Heavy)

Normal* (Normal*)

Ligero (Light)

Muy Sucia (Heavy)

Normal* (Normal*)

Ligero (Light)

Sanitary

(Sanitario)

Allergiene™

Más Caliente* (Extra Hot*)

Muy Alta (Extra High)

Fuerte* (High*)

Media (Medium)

Bajo (Low)

No Centrifugar (No Spin)

Muy Alta (Extra High)

Fuerte* (High*)

Media (Medium)

Bajo (Low)

No Centrifugar (No Spin)

Muy Sucia (Heavy)

Normal* (Normal*)

Ligero (Light)

ENGLISH

Programme Wash Temp. Spin Speed Soil Level

Bright Whites™

Delicados

(Delicates)

Lavado Rápido

(Speed Wash)

Limpeza de Tina

(Tub Clean)

Descargar Ciclo

(Downloaded Cycle)

Caliente* (Hot*)

Tibia (Warm)

Fría (Cold)

Ligeramente Fría (Tap Cold)

Tibia (Warm)

Fría* (Cold*)

Ligeramente Fría (Tap Cold)

Caliente* (Hot*)

Tibia (Warm)

Fría (Cold)

Ligeramente Fría (Tap Cold)

- - -

Caliente (Hot)

Tibia* (Warm*)

Fría (Cold)

Ligeramente Fría (Tap Cold)

Muy Alta (Extra High)

Fuerte* (High*)

Media (Medium)

Bajo (Low)

No Centrifugar (No Spin)

Media* (Medium*)

Bajo (Low)

No Centrifugar (No Spin)

Muy Alta* (Extra High*)

Fuerte (High)

Media (Medium)

Bajo (Low)

No Centrifugar (No Spin)

Muy Alta (Extra High)

Fuerte* (High*)

Media (Medium)

Bajo (Low)

No Centrifugar (No Spin)

Muy Sucia (Heavy)

Normal* (Normal*)

Ligero (Light)

Muy Sucia (Heavy)

Normal* (Normal*)

Ligero (Light)

Muy Sucia (Heavy)

Normal (Normal)

Ligero* (Light*)

Muy Sucia (Heavy)

Normal* (Normal*)

Ligero (Light)

* : default setting

Water Temperature: Select the appropriate water temperature for chosen wash cycle. Always follow garment

•

manufacturer’s care label or instructions when washing. If the Turbo Wash™ option is on, you cannot select No Spin as your Spin.

•

If the Turbo Wash™ option is off, you can select No Spin as your Spin.

Option Cycle

Añadir Prendas (Add Garments)

Reserva (Delay Wash)

You can set a time delay so that the washing machine will start automatically and finish after a specified tim interval.

Press the Power button.

Select a washing programme.

Press the Reserva button and set time required.

Press the Start/Pause button.

NOTE

•The delay time is the time to the end of the programme, not the start. The actual running time may vary due to water temperature, wash load and other factors.

Prelavado (Pre Wash)

If the laundry is heavily soiled, the Pre Wash cycle is recommended.

Press the Power button.

Use this function to add loads or remove the foreign material.

Press the Añadir Prendas button.

Close the door after add loads or remove the

foreign material. (e.g. coin or pin etc.)

Press the Start/Pause button.

Results when choosing Add Garments during cycles.

•

- When the tub is spinning : Tub stops and Door Lock is off.

- When water temperature in the tub is higher than 45°C : Add Garments is not available with short warning sound for safety.

- When lots of water is in the tub : Door Lock is off after draining by safe water level.

NOTE

•Open the door when Door Lock is off after checking the safety.

•Add Garments doesn't work when Tub Cleaning course is in progress for safety.

•Put the laundry into the tub completely. Laundry caught in between door closing part can damage door packing (rubber part) and might cause failure.

Select a washing programme.

Press the Prelavado button.

Press the Start/Pause button.

Vapor (Steam)

Temp. Lavado (Wash Temp.)

Steam Wash features enhance washing performance with low energy consumption.

Press the Power button.

Select steam course.

Press the Vapor button.

Press the Start/Pause button.

Steam Wash

For heavily stained clothes, underwear, or baby

•

clothes. Do not use Steam Wash for delicates such as wool,

•

silk, and easily discoloured clothes.

Fresh Care

Use this function when you won't be able to take out your clothes immediately after the wash cycle ends.

Press the Power button.

Set the water temperature for the wash cycle. Set the appropriate temperature, as specified in the fabri care label.

Press the Power button.

Select a washing programme.

Press the Temp. Lavado button repeatedly to

select the desired water temperature:

Press the Start/Pause button.

Velocidad de Centrifugado (Spin Speed)

You can set the desired spin speed. Use this feature properly according to the characteristics

of the load.

Spin Only

•

Press the Power button.

Select a washing programme.

Press and hold the Vapor button for 3 seconds.

The light (

Press the Start/Pause button.

NOTE

•After the cycle ends, the drum will tumble periodically for up to 19 hours to prevent wrinkles. Press the Start/Pause or Power button at any time to unload laundry.

) will turn on.

Press the Velocidad de Centrifugado button

repeatedly to select the desired spin speed.

Press the Start/Pause button.

NOTE

•The Velocidad de Centrifugado button also activates the Drain&Spin cycle to drain the tub and spin clothes; for example, if you want to remove clothes before the cycle has ended.

•To use Drain&Spin, press the Power button, then press the Velocidad de Centrifugado button repeatedly to select a spin speed. Press the Start/ Pause button to begin.

+ 65 hidden pages

LG WM20VVS6 Owner's manual

Specifications and Main Features

Frequently Asked Questions

User Manual