LG WM2011HW, WM2010CW Owner’s Manual
S G AC INE
USER'SGUIDE&
INSTA//MIONINSTRUCTIONS
Before beginning installation, read these
instructions carefully. This will simplify installation
and ensure that the washer is installed correctly
and safely. Leave these instructions near the
washer after installation for future reference.
To contact LG Electronics, 24 hours a day,
7 days a week:
1=800=243=0000
Or visit us on the Web at: us.lge.com
NOmero teief6nico de LG Electronics, las 24
horas del dia, 7 dias a la semana:
1-800-243-0000
0 vidtenos en la Web en: us.lge.com
[AVADORA
GUIADE/USUARiOE
INSTRUCCIONESDEINSTAI_ACION
Antes de comenzar la instalacion, leaatentamente
estasinstrucciones. Estosimpiificara ia instalacion
y aseguraraque iaiavadoraesta instaiada en forma
correcta y segura. Conserve estas instrucciones cerca
de ia iavadoraiuego de iainstalacion para futuras
consuitas.
rvlodel/rvlodele
WM2010C*
Designed specially to use only
HE (High-Efficiency) detergent
Speciaiement concu pour
utilisation avec un detergent
haute efficacite uniquement
INT ODUCTION
iMPORTANT SAFETY iNSTRUCTiONS
Basic Safety Precautions .................................. 3-6
PARTS AND FEATURES
specialFeatures.....................................................7
Key Partsand Components ...................................8
iNSTALLATION iNSTRUCTiONS
Choose the Proper Location .................................. 9
Clearances ............................................................. 9
Flooring ................................................................ 10
Installations With Optional Pedestal Base
or Stacking Kit ...................................................... 10
Unpacking and Removing Shipping Bolts ........... 11
Connecting the Water Lines ................................. 12
Connecting the Drain Line .................................... 13
Leveling the Washer ............................................. 14
HOW TO USE
Sorting Wash Loads ............................................. 15
Selecting Detergent .............................................. 16
About the Dispenser ............................................. 16
Loading the Dispenser ......................................... 17
Control Panel Features ........................................ 18
Cycle Guide .......................................................... 19
The Time and Status Display ............................... 20
Operating the Washer .......................................... 21
Cycle Setting Buttons .......................................... 22
Cycle Options Buttons ................................... 23-24
Special Functions ................................................. 24
CARE AND CLEANING
Regular Cleaning .................................................. 25
Cleaning the Washer ............................................ 26
Maintenance ................................................... 27-28
THANKYOUI
Oongratulations on your purchase
and welcome to the LG family.
Your new LG washing machine
combines the most advanced
washing technology with simple
operation and high efficiency.
By following the operating and care
instructions in this manual, your
washer will provide you with many
years of reliable service.
Product Registration Information
Model:
Serial Number:
Date of Purchase:
The model and serial number can be located on
the rating plate on the front of the washer.
TROUBLESHOOTING
Normal Bounds You May Hear .............................29
BeforeCallingforService...............................29-31
SPECIFICATIONS / OPTIONAL ACCESSORIES
Key Dimensions and Specifications ..................... 32
Optional Accessories ........................................... 32
WARRANTY ...................................................33
2
I 0 TANTSAFETYINST UcTIONS
RSAD ALL iNSTRUCTiONS BEFORS USE
_WARNING Foryo.rsafety,theinformationinthisman.alre.stbe
followed to minimize the risk of fire or explosion, electric shock, or to prevent
property damage, personal injury, or loss of life.
Your Safety and the safety of others is very important.
We have provided many important safety messages in this manual and on your appliance. Always read
and obey all safety messages.
This isthe safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word DANGER or WARNING.
These words mean:
_E)A_G_R: You can be killed or seriously injured if you don't immediately follow instructions.
_WARN|NG-" You can be killed or seriously injured ifyou don't follow instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of
injury, and tell you what can happen if the instructions are not followed.
5
I PORTANTSAFETYINSTRUCTIONS
RSAD ALL iNSTRUCTiONS BEFORS USS
,WARNING For your safe ,the information in this manual must be
followed to minimize the risk of fire or explosion, electric shock, or to prevent
property damage, personal injury, or loss of life.
BASIC SAFETY PRECAUTIONS
_II_WAR_II_ | _I_II_G== To reduce the risk of fire, electric shock, or injury to persons when using this
appliance, follow basic precautions, including the following.
• Before use, the washer must be properly installed
as described in this manual.
• Do not wash articles that have been previously
cleaned in, washed in, soaked in, or spotted with
gasoline, dry cleaning solvents, or other flammable
or explosive substances, as they give off vapors that
could ignite or explode.
Do not add gasoline, dry cleaning solvents, or other
flammable or explosive substances to the wash
water. These substances give off vapors that could
ignite or explode.
Under certain conditions, hydrogen gas may be
produced in a hot water system that has not been
used for 2 weeks or more. HYDROGEN GAS IS
EXPLOSIVE. If the hot water system has not been
used for such a period, before using the washer,
turn on all hot water faucets and let the water flow
from each for several minutes. This will release any
accumulated hydrogen gas. As the gas is flammable,
do not smoke or use an open flame during this time.
Do not allow children to play on or in the washer.
Close supervision of children is necessary when the
washer is used near children.
Before the washer is removed from service or
discarded, remove the door to prevent children from
climbing inside.
Do not install or store the washer where it will be
exposed to the weather or freezing temperatures.
• Do not tamper with controls.
• Do not repair or replace any part of the washer or
attempt any servicing other than as described in this
manual. We strongly recommend that any service be
performed by a qualified individual.
See Installation Instructions for grounding
requirements.
ALWAYS follow the fabric care instructions
supplied by the garment manufacturer.
Do not place items exposed to cooking oil in your
washer. Items contaminated with cooking oils may
contribute to a chemical reaction that could cause a
load to catch fire.
Use fabric softeners or products to eliminate static
only as recommended by the manufacturer.
This washer is not designed for maritime use or for
mobile installations such as in RVs, aircraft, etc.
Turn off the water taps and unplug the washer if the
machine is to be left for an extended period of time,
such as during vacations.
Packaging material can be dangerous for children.
There is a risk of suffocatio!! Keep all packaging
from children.
Always check the inside of the washer for foreign
objects before loading laundry. Keep the door closed
when not in use.
GROUNDING INSTRUCTIONS
This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce
the risk of electric shock by providing a path of least resistance for electric current. This appliance is
equipped with a cord having an equipment-grounding conductor and grounding plug. The plug must
be plugged into an appropriate outlet that is properly installed and grounded in accordance with all
local codes and ordinances.
WARNING: Improper connection of the equipment-grounding conductor can result in risk
of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the
appliance is properly grounded. Do not modify the plug provided with the appliance, lilt does not fit the
outlet, have a proper outlet installed by a qualified electrician. Failure to follow these warnings can cause
serious injury,fire, electrical shock, or death.
4
I 0 TANTSAFETYINST UcTIONS
RSAD ALL iNSTRUCTiONS BEFORS USE
WARNING Foryo.rsafety,theinformationinthismanualmustbe
followed to minimize the risk of fire or explosion, electric shock, or to prevent
property damage, personal injury, or loss of life.
SAFETY iNSTRUCTiONS FOR iNSTALLATiON
WARNING: To reduce the risk of fire, electric shock, or injury to persons when using this
appliance, follow basic precautions, including the following.
• Refer to INSTALLATION INSTRUCTIONS for
detailed grounding procedures. Installation
instructions are packed in the washer for installer's
reference. Ifthe washer is moved to a new location,
have it checked and reinstalled by a qualified service
person. Failure to follow this warning can cause
serious injury, fire, electrical shock, or death.
• Do not, under any circumstances, cut or remove
the third (ground) prong from the power cord.
Failure to follow this warning can cause serious
injury, fire, electrical shock, or death.
• For personal safety, this appliance must be
properly grounded. Failure to follow this warning
can cause serious injury, fire, electrical shock,
or death.
• The power cord of this appliance is equipped
with a 3-prong (grounding) plug which mates
with a standard 3-prong (grounding) wall outlet to
minimize the possibility of electric shock hazard from
this appliance.
• This washer must be plugged into a 120VAC, 60Hz
grounded outlet. Failure to follow this warning can
cause serious injury, fire, electrical shock, or death.
• Have the wall outlet and circuit checked by a
qualified electrician to make sure the outlet is
properly grounded. Failure to follow this warning
can cause serious injury, fire, electrical shock,
or death.
• Where a standard 2=prong wall outlet is
encountered, it is your personal responsibility
and obligation to have it replaced with a properly
grounded 3-prong wall outlet. Failure to follow
this warning can cause serious injury, fire, electrical
shock, or death.
• Do not install on carpet. Install washer on a solid
floor. Failure to follow this warning can cause serious
leak damage.
Do not remove ground prong. Do not use an
adapter or extension cord. Plug into a grounded
3=prong outlet. Failure to follow these warnings can
cause serious injury, fire, electrical shock, or death.
• The washer should always be plugged into its
own individual electrical outlet which has a
voltage rating that matches the rating plate. This
provides the best performance and also prevents
overloading house wiring circuits which could cause
a fire hazard from overheated wires.
• Never unplug your washer by pulling on the
power cord. Always grip plug firmly and pull straight
out from the outlet. Failure to follow this warning can
cause serious injury, fire, electrical shock, or death.
• Repair or replace immediately all power cords
that have become frayed or otherwise damaged.
Do not use a cord that shows cracks or abrasion
damage along its length or at either end. Failure
to follow this warning can cause serious injury, fire,
electrical shock, or death.
When installing or moving the washer, be careful
not to pinch, crush, or damage the power cord.
Failure to follow this warning can cause serious
injury, fire, electrical shock, or death.
The washer must be installed and electrically
grounded by a qualified service person in
accordance with local codes to prevent shock
hazard and assure stability during operation.
Washer is heavy. Two or more people may be
needed to install and move the appliance. Failure
to do so can result in back or other injury.
Store and install the washer where it will not
be exposed to temperatures below freezing or
exposed to outdoor weather conditions. Failure to
follow this warning can cause serious leak damage.
Do not install the washer in humid spaces to
reduce the risk of electric shock. Failure to follow
this warning can cause serious injury, fire, electrical
shock, or death.
5
I PORTANTSAFETYINSTRUCTIONS
READ ALL iNSTRUCTiONS BEFORE USE
WARNING For your safety,the information in this manual must be
followed to minimize the risk of fire or explosion, electric shock, or to prevent
property damage, personal injury, or loss of life.
SAFETY iNSTRUCTiONS FOR USE, CAREAND CLEANING, AND DISPOSAL
_II_WAF_II_ | _I_G== To reduce the risk of fire, electric shock, or injury to persons when using this
appliance, follow basic precautions, including the following.
• Unplug the washer before cleaning to avoid the
risk of electric shock.
• Never use harsh chemicals, abrasive cleaners,
or solvents to clean the washer. They will
damage the finish.
• Do not put oily or greasy rags or clothing on
top of the washer. These substances give off
vapors that could ignite the materials.
• Do not wash items that are soiled with
vegetable or cooking oil. These items may
contain some oil after laundering. Due to the
remaining oil, the fabric may smoke or catch
fire by itself.
• Disconnect this appliance from the
power supply before attempting any user
maintenance. Turning the controls to the OFF
position does not disconnect this appliance
from the power supply. Failure to follow this
warning can cause serious injury,fire, electrical
shock, or death.
• Do not combine laundry products for use
in one load unless specified on the label.
• Do not mix chlorine bleach with ammonia
or acids such as vinegar. Follow package
directions when using laundry products.
incorrect usage can produce poisonous gas,
resulting in serious injury or death.
• Do not reach into the washer while parts are
moving. Before loading, unloading, or adding
items, push in the cycle selector knob and
allow the drum to coast to a complete stop
before reaching inside. Failure to follow this
warning can cause serious injury,fire, electrical
shock, or death.
• Do not allow children to play on or in the
washer. Close supervision of children is
necessary when the washer is used near
children. As children grow, teach them the
proper, safe use of all appliances. Failure to
comply with these warnings could result in
serious personal injuries.
• Destroy the carton, plastic bag, and other
packing materials after the washer is
unpacked. Children might use them for play.
Cartons covered with rugs, bedspreads, or
plastic sheets can become airtight chambers.
Failure to comply with these warnings could result
in serious personal injuries.
• Keep laundry products out of children's reach.
To prevent personal injury, observe all warnings
on product labels. Failure to comply with these
warnings could result in serious personal injuries.
• Remove the door to the washing compartment
to avoid the danger of children or small animals
getting trapped inside before your washer is
removed from service or discarded. Failure
to do so can result in serious personal injury
or death.
6
SPECIAL FEATURES
O DETERGENT DISPENSER DRAWER
This four-compartment drawer provides separate
dispensers for prewash and main wash detergent,
liquid bleach, and liquid fabric softener.
EASY=ACCESS LOCKING DOOR
Extra-large door locks during operation and
features a delay to prevent the door from being
opened until the washer interior has cooled and
the water level has lowered.
DIRECT-DRIVE MOTOR
Direct-drive motor eliminates the belt and pulleys
found on most washers to provide improved
performance and reliability while increasing
energy efficiency.
PA TS AND FEATU ES
o o o o
O
7
PARTSAND FEATU ES
KEY PARTSAND COMPONENTS
In addition to the special features and
components outlined in the Special Features
section, there are several other important
components that are referenced in this manual.
O LARGE=CAPACITY STAINLESS STEEL
The large capacity stainless steel drum offers
extreme durability and is tilted to improve
efficiency and allow easier access for large items.
LED DISPLAY
O
The LED display shows the selected settings and
options, as well as the estimated time rem aining
in the cycle.
LEVELING FEET
O
Four leveling feet (two in the front and two in
the back) adjust to improve washer stability on
uneven floors.
_) DRAIN ACCESS PANEL
Provides access to the drain line and drain
pump filter.
DRUM
O
Hot and Cold
Water Inlets
Drain
Hose
Rear of Washer
included Accessories
Hot an_
Water Hoses
h
Tie Strap
shipping bolts and (for securing (for securing
adjusting leveling feet) drain hose)
Caps (4)
(for covering
shipping bolt holes)
Elbow Bracket
drain hose)
8
INSTA[/MION INST UcTIONS
cHOOSE THE PROPER LOcATiON
WARN|NG
• Washer is heavy! Two or more people
are required when moving and unpacking
the washer. Failure to do so can result in back
or other injury.
=Store and install the washer where it will not
be exposed to temperatures below freezing
or exposed to outdoor weather conditions.
Failure to follow this warning can cause serious
injury, fire, electrical shock, or death.
• Properly ground washer to conform with all
governing codes and ordinances. Failure to
follow this warning can cause serious injury, fire,
electrical shock, or death.
• To reduce the risk of electric shock, do not
install the washer in humid spaces. Failure to
follow this warning can cause serious injury,fire,
electrical shock, or death.
The base opening must not be obstructed by
carpeting when the washer is installed on a
carpeted floor.
= DO not remove ground prong. Do not use
an adapter or extension cord. Plug into a
grounded 3=prong outlet. Failure to follow this
warning can cause serious injury, fire, electrical
shock, or death.
Power Outlet
=The power outlet must be within 60 in. (1.5 m) of
either side of the washer.
The appliance and outlet must be positioned so
that the plug is easily accessible.
Do not overload the outlet with more than one
appliance.
The outlet must be grounded in accordance with
current wiring codes and regulations.
Time-delay fuse or circuit breaker is
recommended.
NOTE: it is the personal responsibility and
obligation of the product owner to have a
proper outlet installed by a qualified electrician.
CLEARANCES
211/4L:_
(54cm)
I
(75.6 cm) (10 cm)
51_
(129.5 cm)
To ensure sufficient clearance for water lines and
airflow, allow minimum clearances of at least
1 in. (2.5 cm) at the sides and 4 in. (10 cm)
behind the unit. Be sure to allow for wall, door,
or floor moldings that may increase the required
clearances.
1"-_11_,_ 27" _ _=-1"
(2.5 cm) (68.6 cm) (2.5 cm)
Allow at least 24 in. (61.2 cm) in front of the
washer to open the door.
9
INSTALLATIONINST UcTIONS
FLOORING
• To minimize noise and vibration, the washer
MUST be installed on a solidly constructed floor.
See the NOTE at right.
• Allowable slope under the entire washer is
1o maximum.
• Carpeting and soft tile surfaces are not
recommended.
• Never install the washer on a platform or weakly
supported structure. Use only an approved
accessory pedestal as described below.
INSTALLATIONS WiTH OPTIONAL
PEDESTAL BASE OR STACKINGKIT
IMPORTANT: if you are installing your washer
using an optional pedestal base or stacking kit,
please refer to the instructions for your pedestal
or stacking kit before proceeding with the
installation.
NOTE: Please note that the floor must be strong
and rigid enough to support the weight of the
washer when fully loaded, without flexing or
bouncing. If your floor has too much flex in it,
you may need to reinforce it to make it more
rigid. A floor that is adequate for a top-loading
washer may not be rigid enough for a front-
loading washer, due to the difference in the spin
speed and direction. If the floor is not solid, your
washer may vibrate and you may hear and feel
the vibration throughout your house.
Required Dimensions for Installation
With Pedestal
I_ 293/4_1 I_ 4"
(75.6 cm) (10 cm)
Required Dimensions for Installation
With Stacking Kit
m: :
771/2 ''
(196.8 cm)
1"-_11_ 27" _ I_-1"
(2.5 cm) (68.6 cm) (2.5 cm)
10
INSTAI_/ATIONINST UcTIONS
UNPACKING AND REMOVING SHiPPiNG BOLTS
When removing the washer from the carton
base, be sure to remove the foam tub support
in the middle of the carton base.
If you must lay the washer down to remove the
base packaging materials, always lay it carefully
on its side. Do NOT lay the washer on its front
or back.
iMPORTANT: To prevent internal damage
during transport, the washer is equipped with
4 shipping bolts and plastic retainers. These
bolts and retainers MUST be removed before
operating the washer.
• Failure to remove shipping bolts and retainers
may cause severe vibration and noise, which can
lead to permanent damage to the washer. The
cord is secured to the back of the washer with
a shipping bolt to help prevent operation with
shipping bolts in place.
Foam Tub Carton Base
Support
Shipping
Bolts
Starting with the bottom 2 shipping bolts,
use the included wrench to remove the
4 shipping bolts by turning them
counterclockwise.
Remove the retainers by turning them slightly
while pulling. Rotate and press the hole caps
into the shipping bolt holes.
NOTE: Save the bolts and retainers for
future use. To prevent damage to internal
components, the shipping bolts and
retainers must be installed when
transporting the washer.
11
INSTALLATIONINST UcTIONS
CONNECTING THE WATER LINES
• iMPORTANT: Use new hoses when installing
the washer. DO NOT reuse old hoses.
• iMPORTANT: Use ONLY the inlet hoses
provided by LG with this laundry product.
Aftermarket hoses are not guaranteed to fit or
function correctly. Other hoses may not tighten
correctly and could cause leaks. Subsequent
damage to product or property will not be
covered under the terms of LG's warranty.
• Water supply pressure must be between
14.5 PSI and 116 PSi (100-800 kPa). if the
water supply pressure is more than 116 PSI,
a pressure reducing valve must be installed.
• Periodically check the hose for cracks, leaks,
and wear, and replace the hose if necessary.
• Make sure that the water lines are not stretched,
pinched, crushed, or kinked.
• The washer should never be installed or stored
in a location subject to freezing temperatures.
Damage to the water lines and internal
mechanisms of the washer can result, if the
washer was exposed to freezing temperatures
prior to installation, allow it to stand at room
temperature for several hours before use.
f
Water Hose
(to water inlet
on washer
Rubber Seal
Rubber Seal
Water Hose "/
(to tap)
insert a rubber seal into the threaded
fittings on each hose.
12
Water
Inlets
NOTE: Do not cross-thread the hose fittings.
Attach the hot water line to the red hot water
inlet on the back of the washer. Attach the
cold water line to the blue cold water inlet on
the back of the washer. Tighten the fittings
securely.
Water Tap
--,,J
Attach the hot water line to the hot water
tap. Attach the cold water line to the cold
water tap.
Tighten the fittings securely. Open the water
taps fully to check for leaks.
INSTAI_/ATIONINST UcTIONS
CONNEcTiNG THE DRAIN LiNE
• The drain hose should always be properly
secured. Failure to properly secure the drain
hose can result in flooding and property
damage.
Do not install the end of the drain hose higher
than 96 in. (244.8 cm) above the bottom of the
washer.
The drain must be installed in accordance with
any applicable local codes and regulations.
Make sure that the water lines are not stretched,
pinched, crushed, or kinked.
Option 1: Standpipe
_.._ Elbow
Bracket
Drain
Hose
Clip the end of the hose into the elbow bracket.
Insert the end of the drain hose into a standpipe.
Use tie strap to secure the drain hose in place.
NOTE: Total height of the hose end should not
exceed 96 in. (244.8 cm) from the bottom of the
washer.
Option 2: Laundry Tub
Elbow
Bracket Laundry
Tub
In Strap
Hose
Clip the end of the hose into the elbow bracket.
Hang the end of the drain hose over the side of
the laundry tub. Use tie strap to secure the drain
hose in place.
NOTE: Total height of the hose end should not
exceed 96 in. (244.8 cm) from the bottom of the
washer.
Option 3: Floor Drain
Drain Hose
Floor Drain _
J
Insert the end of the drain hose into the floor
drain. Secure the hose in place to prevent it
from moving.
15
INSTALLATIONINST UcTIONS
LEVELING THE WASHER
The drum of your new washer spins at very high
speeds, up to 1,100 RPM. To minimize vibration,
noise, and unwanted movement, the floor must
be a perfectly level, solid surface.
NOTE: Adjust the leveling feet only as far as
necessary to level the washer. Extending the
leveling feet more than necessary can cause
the washer to vibrate.
• All four leveling feet must rest solidly on the
floor. Rock the washer gently from corner to
corner to make sure that the washer does
not rock.
If you are installing the washer on the optional
pedestal, you must use the leveling feet on
the pedestal to level the washer. The washer's
leveling feet should be fully retracted and locked
into position with the Iocknuts.
Leveling
Feet
Position the washer inthe final location,
taking special care to not pinch, strain, or
crush the water and drain lines. Place a level
across the top of the washer.
Leveling
Feet
14
Raise Lower
Loosen the Iocknuts on all 4 leveling feet
until you can turn the feet with the included
wrench. Turn clockwise to raise the washer
or counterclockwise to lower it.
Tighten all 4
Iocknuts securely
Once the washer is level from side to side
and front to back, tighten all Iocknuts
securely.
Make sure that all 4 leveling feet are in firm
contact with the floor.
NOTE: To make sure that the washer is
properly level, run the washer with a test
load: place approximately 6 pounds of
laundry in the machine. Then press POWER,
press RINSE+SPIN, and then press the
START/PAUSE button. See the following
sections for additional information on cycle
selection and operation.
Verify that the washer does not rock or
vibrate excessively during the spin cycle.
If the washer vibrates or shakes, adjust
the leveling feet until the washer is stable
and retest.
SORTING WASH LOADS
0 TO USE
FaDri¢ Care LaDels
Most articles of clothing feature fabric care labels
that include instructions for proper care.
Fabric Care Labels
wash
cycle .orma, Permanent"_press/ GentlY/
Water • Q • • • •
temperature Hot Warm Cold/cool
Bleach _ _
symbols Any bleach Only non-chlodne bleach Do not bleach
wrinkle resistant delicate
H h Donot wash Donotwring
(50°C/120°F) (40°C/105°F) (30°C/85°F)
(whenneeded) (whenneeded)
Loading the washer
* Check all pockets to make sure that they
are empty. Items such as clips, matches,
pens, coins, and keys can damage both your
washer and your clothes.
* Close zippers, hooks, and drawstrings to
prevent these items from snagging or tangling
on other clothes.
. Pretreat heavily stained areas for best results.
. Combine large and small items in a load. Load
large items first.
. Large items should not be more than half of the
total washload.
. The washer can be fully loaded, but the drum
should not be tightly packed with items. The
door of the washer should close easily.
. To prevent an out-of-balance load, do not wash
single items. Add one or two similar items to
the load. Large, bulky items, such as a blanket,
comforter, or bedspread should be washed
individually.
. Do not wash or spin waterproof clothes.
. When unloading the washer, check under the
door seal for small items.
Grouping Similar Items
For best results, sort clothes into loads that can
be washed with the same wash cycle.
Different fabrics have different care requirements.
Always wash dark colors separately from light
colors and whites to prevent discoloration. If
possible, do not wash heavily soiled items with
lightly soiled ones. The chart below shows
recommended groupings.
NOTE: The front loading washer rotates the
wet laundry to wash it with less water. If you
do not see the water during washing, it is
not a problem because the laundry is suf-
ficiently wet.
15
OWTO USE
SELECTING DETERGENT
IMPORTANT: Your washing machine is
designed for use with only High-Efficiency
(HE) detergents. HE detergents are formulated
specifically for front-load washers and contain
suds-reducing agents. Always look for the HE
symbol when purchasing detergent.
HE detergents produce fewer suds, dissolve
more efficiently to improve washing and rinsing
performance, and help to keep the interior of your
washer clean.
Using a regular detergent may cause oversudsing
and unsatisfactory performance.
ABOUT THE DISPENSER
The automatic dispenser consists of four
compartments which hold:
• Liquid chlodne bleach.
Liquid fabric softener.
Liquid or powdered detergent for prewash.
Liquid or powdered detergent and color-safe
bleach for main wash.
All laundry products can be added at once in
their respective dispenser compartments. They
will be dispensed at the appropriate time for the
most effective cleaning.
After adding the laundry products to the
dispenser, close the dispenser drawer.
IMPORTANT: Do not place or store laundry
products, such as detergent, bleach, or liquid
fabric softener, on top of your washer or dryer.
Wipe up any spills immediately. These products
can damage the finish and controls.
Designed specially to use only
HE (High-Efficiency) detergent
Liquid Chlorine Liquid Fabric
Bleach Softener
Compartment Compartment
Prewash
Detergent
Compartment
16
To add detergent, bleach, and fabric softener to
the automatic dispenser:
_Open the drawer.
O Load the into the
appropriate compartments.
O Slowly close the drawerdispenser
avoid early dispensing of the laundry
products,
NOTE: It is normal for a small amount of water to
remain in the dispenser compartments at the end
of the cycle,
dispenser
laundry products
to
Main Wash Detergent
Compartment
LOADING THE DISPENSER
0 TO USE
Prewash Detergent Compartment
Add liquid or powdered detergent to this
compartment when using the Prewash option.
Always use HE (High-Efficiency) detergent with
your washing machine.
• The amount of detergent added for the Prewash
option is 1/2 the amount recommended for the
main wash cycle. For example, if the main wash
cycle requires one measure of detergent, add
1/2 measure for the Prewash option.
NOTE: If you are using the Prewash option,
powdered detergent must be used in the main
wash compartment. Liquid detergent will drain
into the washer drum as it is added.
Main wash Detergent Compartment
This compartment holds laundry detergent
for the main wash cycle, which is added to
the load at the beginning of the cycle. Always
use HE (High-Efficiency) detergent with your
washing machine.
Never exceed the manufacturer's
recommendations when adding detergent.
Using too much detergent can result in
detergent buildup in clothing and the washer.
Either powdered or liquid detergent may be used.
NOTE: Liquid detergent will drain into the washer
drum as it is added.
NOTE: Liquid or powdered color-safe bleach
may be added to the main wash compartment
with detergent of the same type.
Liquid Bleach Compartment
This compartment holds liquid chlorine bleach,
which will be dispensed automatically at the
proper time during the wash cycle.
Do not add powdered or liquid color-safe bleach
to this compartment.
Always follow the manufacturer's
recommendations when adding bleach. Do not
exceed the maximum fill line. Using too much
bleach can damage fabrics.
Never pour undiluted liquid chlorine bleach
directly onto the load or into the drum. Fabric
damage can occur.
Fabric Softener Compartment
This compartment holds liquid fabric softener,
which will be automatically dispensed during the
final rinse cycle.
Always follow the manufacturer's
recommendations when adding fabric softener.
Do not exceed the maximum fill line. Using
too much fabric softener may result in stained
clothes.
Dilute concentrated fabric softeners with warm
water. Do not exceed the maximum fill line.
Never pour fabric softener directly onto the load
or into the drum.
Designed speciallv to use onlv
HE (High-Efficiencv) detergent
17
OWTO USE
CONTROL PANEL FEATURESmWM2010C *
POWER ON/OFF BUTTON
Press to turn the washer ON. Press again to turn
the washer OFR
NOTE: Pressing the ON/OFF button during a
cycle will cancel that cycle and any load settings
will be lost.
O CYCLE SELECTOR KNOB
Turn this knob to select the desired cycle. Once
the desired cycle has been selected, the standard
presets will be shown in the display. These
settings can be adjusted using the cycle setting
buttons anytime before starting the cycle.
START/PAUSE BUTTON
Press this button to START the selected cycle.
If the washer is running, use this button to PAUSE
the cycle without losing the current settings.
NOTE: If you do not press the START/PAUSE
button within 4 minutes of selecting a cycle, the
washer automatically turns off.
CYCLE SETTING BUTTONS
Use these buttons to adjust the desired cycle
options for the selected cycle.
TIME AND STATUS
The display shows the selected settings and
options, as well as the estimated time remaining
in the cycle.
O
OPTION BUTTONS
The option buttons allow you to select
additional cycle options and will light when
selected. Certain buttons also allow you to
activate special functions by pressing and
holding the button for 3 seconds.
For detailed information about the individual
options, please see the following pages.
18
0 TO USE
CYCLE GUIDEmWM2010C *
The cycle guide below shows the options and recommended fabric types for each cycle.
Cotton/
Towels
Normal
PetiT1,
Press
Delicates
HandWash/
Wool
\
Cotton,linen,
towels,shirts,
sheets
Mixedloads,
workclothes,
jeans,shirts
Dressshirts/
pants,wrinklefree
clothing,poly/
cottonblend
clothing,tablecloths
Dressshirts/
blouses,nylons,
sheeror
lacygarment
Itemslabeled
"handwashable"
Normal
Heavy
Light
Normal
Heavy
Light
Normal
Heavy
Light
Normal
Heavy
Light
Normal
Light
Warm/Cold
Warm/Warm
Hot/Cold
TapCold/Cold
Cold/Cold
Warm/Cold
Warm/Warm
Hot/Cold
TapCold/Cold
Cold/Cold
Warm/Cold
Warm/Warm
Hot/Cold
TapCold/Cold
Cold/Cold
Cold/Cold
Warm/Cold
Warm/Warm
TapCold/Cold
Warm/Cold
Warm/Warm
TapCold/Cold
Cold/Cold
ExtraHigh
NoSpin
Low
Medium
High
High
ExtraHigh
NoSpin
Low
Medium
Medium
High
NoSpin
Low
Medium
NoSpin
Low
Medium
NoSpin
Low
@
@
J
NOTE: To protect your garments, not every wash/rinse temperature, spin speed, soil level,
or option is available with every cycle.
19
OWTO USE
THE TIME AND STATUSDISPLAY
The time and status display shows the cycle progress and estimated time remaining, cycle
options, and other status messages for your washer.
DOOR LOCK iNDiCATOR
O
Indicates that the door is locked. The washer
door will lock while the washer is operating.
The door can be unlocked by pressing the
START/PAUSE button to stop the washer.
NOTE: If the temperature in the washer is too
high, the door cannot be unlocked until the
washer has cooled. If the water level is too high,
select the DRAIN & SPIN cycle to drain excess
water. Do not try to force open the door.
ESTIMATED TiME REMAiNiNG
O
When the START/PAUSE button is pressed, the
washer automatically detects the wash load
(weight) and optimizes the washing time, based
on the selected cycle and options. The display
will then indicate the estimated time remaining
for the selected wash cycle.
NOTE: The cycle time displayed may appear
much longer than that of a top-loading washer.
The displayed time is for the complete cycle,
rather than just the agitation portion of the cycle,
as istypically shown on a top-loading washer.
20
Loading...