LG WK7, WKM7 User Manual

OWNER’S MANUAL

MFL70521720

built-in

Please read this manual carefully before operating your set and retain it for future reference.

MODEL WK7 WKM7

www.lg.com

Getting Started2

Safety Information

Getting Started

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

This lightning ash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufcient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

CAUTION: The apparatus should not be exposed to water (dripping or splashing) and no objects lled with liquids, such as vases, should be placed on the apparatus.

WARNING: Do not install this equipment in a conned space such as a book case or similar unit.

CAUTION: Do not use high voltage products around this product. (ex. Electrical swatter) This product may malfunction due to electrical shock.

CAUTION: No naked ame sources, such as lighted candles, should be placed on the apparatus.

CAUTION: Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from over heating. The openings shall never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product shall not be placed in a builtin installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instruction has been adhered to.

Getting Started 3

CAUTION concerning the Power Cord

The Power Plug is the disconnecting device. In case of an emergency, the Power Plug must remain readily

accessible.

Check the specication page of this owner’s manual to be certain of the current requirements.

Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or re. Periodically examine the cord of your device, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the device, and have the cord replaced with an exact replacement part by an authorized service center. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits

the device.

NOTICE: For safety marking information including product identication and supply ratings, please refer to the main label on the bottom or the other surface of the product.

CAUTION when using this product in environments of low humidity

yIt may cause static electricity in environments of

low humidity.

yIt is recommended to use this product after

touching any metal object which conducts

electricity.

For models using an adapter

Only use the AC adapter supplied with this device. Do not use a power supply from another device or another manufacturer. Using any other power cable or power supply may cause damage to the device and void your warranty.

Getting Started

Getting Started4

Symbols

Refers to alternating current (AC).

Refers to direct current (DC).

Refers to class II equipment.

Refers to stand-by.

Refers to “ON” (power).

Refers to dangerous voltage.

Table of Contents

1 Getting Started

2 Safety Information 6 Unique features 6 Introduction 7 Front

8 Rear

2 Connecting

9 Network connection 9 Setting up the Speaker 9 – Connecting the AC Adapter 10 – Installing “Google Home” App 10 – Launch the app to connect Wi-Fi 13 – Reference site for Google Assistant Help

3 Operating

14 Basic Operations 14 – Function LED status 15 – Simple Operation Guide 16 How to use the Google Assistant 16 – Google Assistant LED status 16 – Talk to the Google Assistant 17 – Control Smart Home devices 17 – Voice command 19 LG Wi-Fi Speaker 19 – Installing "LG Wi-Fi Speaker" App 20 – BLUETOOTH connection lock 20 – Sound adjustment 21 Using BLUETOOTH® technology 21 – Listening to music stored on the

BLUETOOTH devices

23 Other Operations 23 – Turn off the microphone temporarily 23 – Auto function change 24 – Edit speaker name

24 – Resetting

4 Troubleshooting

25 Troubleshooting

25 – General

26 – Network 26 – Application

5 Appendix

27 Trademarks and Licenses

27 Handling the Unit 28 OPEN SOURCE

29 Specifications

Table of Contents 5

Getting Started6

Unique features

BLUETOOTH®

Getting Started

Listen to music stored on your Bluetooth device.

"Google Home" application

You can enjoy various functions of this speaker by connecting to network and your smart device with "Google Home" app.

The speaker and your smart device must be connected to the same network. Visit or "Google Play” or “App Store” to search for "Google Home" app. For detailed information, refer to page 10

Voice recognition

You can use a variety of voice commands to control the speaker with Google Assistant.

"LG Wi-Fi Speaker" application

Listens to music stored on your smart device.

You can control this speaker with your iPhone or Android device via "LG Wi-Fi Speaker" app. Visit "Google Play” or “App Store” to search for "LG Wi-Fi Speaker" app. For detailed information, refer to page

Introduction

Symbol used in this manual

Note

Indicates special notes and operating features.

Caution

Indicates cautions for preventing possible damages from abuse.

yDepending on the application’s version and the

software of smart device, "LG Wi-Fi Speaker" app may not be operated normally.

ySome smart devices may not be compatible with

this speaker.

Front

Getting Started 7

d e f

Plays, pauses or skip playback.

Function LED

Changes LED status in according function.

Bluetooth: Blue / Wi-Fi: White (Page 14)

(Function)

Changes Wi-Fi or Bluetooth. (Page 15)

- Use in instead of saying "Hey Google" by long pressing the (Page 16)

- Plays or pauses a music and stops the Google Assistant feedback. (Page 15)

Adjusts the volume.

Built-in microphones

Google Assistant LED

Changes LED status according to Google

Assistant performance. (Page 16)

Note

Precautions in using the touch buttons

y Use the touch buttons with clean and dry

hands.

- In a humid environment, wipe out any moisture on the touch buttons before using.

y Do not press the touch buttons hard to make

it work.

- If you apply too much strength, it can be damaged the sensor of the touch buttons.

y Touch the button that you want to work in

order to operate the function correctly.

y Be careful not to have any conductive

material such as metallic object on the touch buttons. It can cause malfunctions.

Getting Started

Getting Started8

Rear

Getting Started

b c

(Microphone off) button

Enables or disables the Google Assistant

Microphone (voice recognition) (Page 23)

DC IN (AC adapter input)

RESET

Initialize information of existing connection. (Page 24)

Connecting 9

Network connection

You can enjoy various functions of this speaker by connecting to network and your smart device with "Google Home" app.

Choose the connection method considering your network environment.

The "Google Home" app is required to connect the speaker wirelessly to the network.

Setting up the Speaker

Connecting the AC Adapter

Connect the speaker to the power supply with the supplied AC adapter.

1. Connect the supplied AC power cord to DC IN adapter input.

2. Plug the AC power cord into an AC outlet.

3. Function LED rotates for tens of seconds (Approx. 30 ~ 50 seconds) during booting.

4. The speaker has completed booting when Function LED blinks in white with the sound.

Note

If the speaker is connected to Wi-Fi, Function LED is solid white when booting is completed.

Connecting

Caution

Only use the AC adapter supplied with this device. Do not use a power supply from another device or manufacturer. Using any other power cable or power supply may cause damage to the device and void your warranty.

Connecting10

Installing “Google Home” App

The "Google Home" app allows you to use various functions of this speaker through your smart device: There are a ways to install “Google Home” app onto your Smart device.

Requirements before setup

yA wireless router must be connected to the

Connecting

internet. A smart device such as Android or iOS devices must be connected to the wireless router via Wi-Fi connection.

yIt needs Google account to use this app. During

connect Wi-Fi, this app may request to create Google account.

Through "Google Play or “App Store”

1. Tap the“Google Play Store” icon or “App Store” icon on your smart device.

2. Type in “Google Home” in the search bar and tap “Search” on “Google Play” or “App Store”

3. Select “Google Home” in the search result list to download.

Google Home

Launch the app to connect Wi-Fi

Make sure your smart device Wi-Fi feature is turned on. Once a connecting operation is performed, it does not need to be performed again.

Note

In case of iOS devices, it should be turned on Bluetooth setting on your smart device.

1. Tap the "Google Home" icon to launch the app.

2. Follow the screen on app to set speaker. Follow these instructions in order.

Note

yDepending on the device version, “Google

Home” app may not work.

yFor more information, visit the web site.

https://www.google.com/cast/setup/

Connecting 11

Connecting

Connecting12

Connecting

Note

yFor more information on the setup, visit

the web site. https://support.google.com/ assistant/answer/7538816

yUse the same Wi-Fi connection to set the

speaker and your smart device.

yIf the Bluetooth setting turned on your

smart device, it will be easy to connect Wi-Fi.

yDuring installation, you should create a

speaker name. It is needed when pairing the Bluetooth device. You can check and edit the speaker name. Follow the “Edit speaker name”. (Page 24)

3. When the speaker is properly connected to Wi-Fi, the Function LED will be solid white with sound.

Note

yIf the app is already installed, this speaker is

display in main screen of the app.

yDepending on wireless router status, it might

not work well Wi-Fi connection.

yIt is recommended that you use WiFi Group

Play with less than 5 speakers.

yFor more information (Set up, Usage, Help

etc.), research “Google Assistant Help” or visit the web site. http://support.google.com/

assistant

yThe speaker is not available for use on some

functions from the “Google Assistant Help”

site. (ex. Call etc.) (Page 13)

y“Google Home” app is provided by Google. It

might be revised by a change of Google Policy.

yThe speaker is not compatible with ”Smart

ThinQ" app. Therefore it is not available in setup and cannot be controlled by using

"Smart ThinQ" app

Reference site for Google Assistant Help

Connecting 13

Set up the Google Assistant on your speakers

Listen to music https://support.google.com/assistant/answer/7539710

Play music on your TV or speakers https://support.google.com/assistant/answer/7539867

Play TV shows & movies https://support.google.com/assistant/answer/7539991

Control smart home devices https://support.google.com/assistant/answer/7540703

Create a shopping list https://support.google.com/assistant/answer/7540969

Buy items on your shopping list https://support.google.com/assistant/answer/7384588#speaker

Set up and manage My Day https://support.google.com/assistant/answer/7393908#speaker

Listen to radio https://support.google.com/assistant/answer/7540307

See which Google Account is linked to your Assistant

Control volume of your speakers https://support.google.com/assistant/answer/7538817

Change your language https://support.google.com/assistant/answer/7394513#speaker

https://support.google.com/assistant/answer/7538816

https://support.google.com/assistant/answer/7539992

Connecting

+ 29 hidden pages