LG WK7 USER'S GUIDE

Download

SIMPLE MANUAL

MODEL

WK7

MFL70405158

1907_Rev01

www.lg.com

ENGLISH

Safety Information

AUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This lightning ash with arrowhead symbol within an equilateral triangle is intended to

alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufcient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an

equilateral triangle is intended to

alert the user to the presence of

important operating and maintenance (servicing) instructions in the literature accompanying the product.

WARNING:

yTO PREVENT FIRE OR ELECTRIC SHOCK

HAzARD, DO NOT ExPOSE THIS PRODUCT TO RAIN OR MOISTURE.

yDo not install this equipment in a conned

space such as a book case or similar unit.

yThis unit contains magnets which can

be harmful to some kind of object (Ex: Magnetic card, Pacemaker etc..).

CAUTION:

yDo not block any ventilation openings. Install in

accordance with the manufacturer’s instructions. Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from over heating. The openings should never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product shall not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instruction has been adhered to.

yThe apparatus should not be exposed

to water (dripping or splashing) and no objects lled with liquids, such as vases, should be placed on the apparatus.

yNo naked ame sources, such as lighted

candles, should be placed on the apparatus.

yTo avoid re or electric shock, do not open the

unit. contact to qualied personnel only.

yDo not leave the unit in a place near the

heating appliances or subject to direct sunlight, moisture, or mechanical shock.

yThe Power Plug is the disconnecting

device. In case of an emergency, the Power Plug must remain readily accessible.

yTo clean the unit, use a soft, dry cloth. If

the surfaces are extremely dirty, use a soft cloth lightly moistened with a mild detergent solution. Do not use strong solvents such as alcohol, benzine, or thinner, as these might damage the surface of the unit.

yDo not use volatile liquids such as

insecticide spray near the unit. Wiping with strong pressure may damage the surface. Do not leave rubber or plastic products in contact with the unit for a long period of time.

yDo not place the unit over the vehicle’s

air bag. When the air bag deploys, it may result in injury. Before using in the car, x the unit.

yDo not use the handsfree function during

driving a car.

yDo not leave the unit on an unstable place

such as high shelves. it may fall down because of the vibration of the sound.

yDo not use high voltage products around this

product. (ex. Electrical swatter) This product may malfunction due to electrical shock.

CAUTION when using this product in environments of low humidity.

yIt may cause static electricity in environments

of low humidity.

yIt is recommended to use this product after

touching any metal object which conducts electricity.

NOTICE: For safety marking information including product identication and supply ratings, please refer to the main label on the bottom or the other surface of the product.

Symbols

Refers to alternating current (AC).

Refers to direct current (DC).

Refers to class II equipment.

Refers to stand-by.

Refers to “ON” (power).

Refers to dangerous voltage.

CAUTION: Only use the AC adapter supplied

with this device. Do not use a power supply from another device or another manufacturer. Using any other power cable or power supply may cause damage to the device and void your warranty.

OPEN SOURCE SOFTWARE NOTICE INFORMATION

To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http://opensource.lge.com. In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CDROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon email request to opensource@lge. com. This offer is valid for a period of three years after our last shipment of this product. This offer is valid to anyone in receipt of this information.

Disclaimers

yGoogle, Google Home, Google Play,

Chromecast built-in and other related marks and logos are trademarks of Google LLC.

yGoogle Assistant requires an internet/data

connection. Data rates may apply.

yThe Google Assistant is not available in

certain languages and countries.

ySubscriptions may be required, and additional

terms, conditions and/or charges may apply.

yControlling certain devices and features

in your home requires a compatible smart device.

Set up

Step 1. Connect the AC adapter

After connecting the AC adapter, the speaker starts booting. Then Function LED rotates for 10 seconds (Approx. 30 ~ 50 seconds) during booting.

Step 2. Install "Google Home" App

Download the Google Home App from the Google Play or App Store.

Google Home

Step 3. Set up the Wi-Fi connection with app

a Connect your smart device to the

Wi-Fi network that you’ll use for your speaker.

NOTE

In case of iOS devices, it should be turned on Bluetooth setting on your smart device.

NOTE

The speaker is not compatible with the “Smart ThinQ” app. So it can not be used for setup or for control by using the “Smart ThinQ” app.

b Launch the “Google Home” app.

c Follow the steps for Wi-Fi

connection on the app.

NOTE

When connected to Wi-Fi, this app may request to create a Google Account. You will need a Google account to use this app.

d When successfully connected Wi-Fi,

blinking Function LED will be solid white.

NOTE

yFor more information (Set up,

Usage, Help etc.), research “Google Assistant Help” or visit the web site. https://support.google.com/ assistant This public site is provided for devices that work with Google Assistant.

yThe speaker may not be available

to use some function from “Google Assistant Help” site.

y“Google Home” app is provided by

Google. It might be revised by a change of Google Policy.

How to Use "Google Assistant"

Make sure the speaker is connected to Wi-Fi. (Page 6-8)

Case 1. Say "Ok Google"

Case 2. Long press the for 2 seconds.

Ok Google

NOTE

If you have any trouble or question about Google Assistant, please suggest by saying “Ok Google, Feedback”. It would be helpful for improving Google Services.

NOTE

Voice command

yPlan your day

“Tell me about my day.” “What’s my next meeting?” “Set a reminder to check schedule at 6pm.”

yWeather

“What’s the weather?” “What’s the weather on tomorrow?” “What’s the weather in New York?”

yMusic

“Play the music.” “Next song.” “Previous song.” “Pause the music”

yAvailability

“How many calories in a hot dog?” “How do I get to Ocean Beach?.” “How do you say hello in Korean?” “Talk to Best Jokes.”

yInternet

“What movies are showing this weekend?” “Why is the sky blue?” “What is the smallest country in Europe?” “How much sugar is there in a Coke?”

ySubscriptions

“What are the latest headlines?.” “Talk to News.” “Play Time’s The Brief.” “Play ESPN ScoreCenter.”

ySmart Home

“Turn up the thermostat.” “Set the thermostat to 72 degrees” “Dim the lights in the kitchen.” “Is the light on in the living room?”

For more information on the voice commands, refer to the “Google Home” app screen or visit the web site. https://support.google.com/assistant

Additional

Comfortable Function

With the Google Assistant built in, you can control compatible smart home devices such as TV’s, lights, switches, plugs, thermostats and more by simply using your voice.

NOTE

For more information, visit the below web site.

ySet up, Usage and more: https://

support.google.com/assistant

yCompatible LG appliance models:

Visit http://www.lg.com and then

search the information

Download “LG Wi-Fi Speaker”

“LG Wi-Fi Speaker” app is provided by LG electronics. This App provides more features (Sound effect etc.) on the speaker. To Enjoy it, download “LG Wi-Fi Speaker” app on the App Store or Google Play.

Sound effect

This system has a number of pre-set

surround sound elds. You can select a

desired sound mode by using “LG Wi-Fi Speaker” app.

Bluetooth Connection

Step 1. Connect the Wi-Fi

Make sure the speaker connects to Wi-Fi by using “Google Home” app (Page 6-8).

NOTE

The Bluetooth connection may not work properly before connecting to Wi-Fi.

Step 2. Change Function

Tap the Button to change functions.

Function LED will be blinking in blue.

Step 3. Find and Select your speaker name

Select speaker name that is set on “Google Home” app from phone’s smart device list. When successfully connected Bluetooth, Function LED will be solid blue.

Speaker name

Function LED

White color: Wi-Fi

Blink Ready for Wi-Fi connection.

Solid Connected Wi-Fi.

Blue color: Bluetooth

Search for Bluetooth

Blink

device.

Solid Paired Bluetooth device.

NOTE

When operation of speaker is completed, Function LED is off after 3 seconds.

Basic Operation

Microphone

Google Assistant LED

Function LED

Microphone Button

Function

Playback Controls

Volume

Microphone

Google Assistant

Wi-Fi / Bluetooth

Play / Pause

Forward Skip

Backward Skip

Volume Control

Enable / Disable Voice recognition

Activate (= Ok Google)

Stop (ex. Weather, News, Radio etc.)

...........................................

..........................................

........................................

.........................................

...............

......................

Long press

........................

Tap

X 2

Tap

X 3

Tap

Press (

for 2 seconds

Tap

)

Important Notice

Resetting

To initialize information of existing connection, follow these instructions.

Press and hold RESET button for 5

seconds. The Function LED is lled, during press RESET.

When speaker enter reset mode, Function

LED starts to rotate quickly with sound. Wait until resetting will complete. (Approx. 1 minute)

The speaker has completed resetting

when Function LED blinks slowly with sound.

NOTE

When you reset this speaker, it needs to reconnect Wi-Fi, Bluetooth.

Specification

Power consumption:

- Refer to the main label.

Dimensions (W x H x D):

- Approx. 135 mm X 210.7 mm X 135 mm

AC Adapter:

- Model : LCAP16B-A

-Manufacturer: Lien Chang Electronic

Enterprise Co., Ltd.

-Inp ut: 100-240 V~ 50-60 Hz

-Output: 19 V

yDesign and specications are subject to

change without notice.

2.1 A

For more information, download the online owner’s manual. http://www.lg.com

LG WK7 USER'S GUIDE

Specifications and Main Features

Frequently Asked Questions

User Manual