LG WF-S7012DS, WF-S7562DN, WF-S7012DN, WF-T7066MN, WF-T7516MN Owner’s Manual

...
Owner's Manual
Please read this manual carefully and thoroughly before operating this unit. Record model name and serial number of the set. Quote this information to your dealer when you require service.
MODEL : WF-T7062DN
WF-T7512FN WF-T7516LN WF-T7066MN WF-T7516MN WF-N7035DN WF-N6836DN WF-N6866DN
F
F OO T
U A
3
y
Fuzz
m
R
A
Econoy
T T S
3
E
Jean
S
Turbo
AU P
Wool
Wsah
r
Hou
s
Rine
Detergent
pin
S
.n
W rate
Mi
Delay
-
g
O R
Lr e
P
Ex-a
Time
e
ag
RAM
Lr
G
eft
L
m u i
Extra Wash
Hot
O­R P
l l a
Extra Rinse
Sm
S S
Cold
k
CE
c
Warm
Gentle Spin
C
LAY
o
h
ED
L
i
l
d
RT
A
ER
T S
A
R
WT
E
H
TW
SA
A
L
W
V E
L E
N
M.
IO E T P
PT O
Read this manual
Inside you will find many helpful hints on how to use and maintain your washer properly. Just a little preventive care on your part can save you a great deal of time and money over the life of your washer. You will find many answers to common problems in the Troubleshooting section. If you review our chart of Troubleshooting Tips first, you may not need to call for service at all.
Introduction
Installation
Before Starting to Wash
Washing Programs
Additional Features
Care and Maintenance
Product Features
Safety Information
Identification of Parts
Placing, Leveling and Installation
Connecting Water Supply Hose
Connecting Drain Hose
Preparation Before Washing
Use of Water, Detergent, Bleach and Softener
Water Level and Amount of Detergent Use of Bleach
Use of Softener Stain Removal Techniques
Function of each Button
Fuzzy Wash (Normal Wash)
Economy Wash
Jean Wash
Wool Wash
Turbo Wash
Washing Process
Delay Start (Reservation) Wash
Child Lock, Mute
Cleaning Inlet Valve Filter
Cleaning Lint Filter
Cleaning and Maintenance
Grounding Method
3
4
7
8
9
10
11
12
13
13 14 15
16
24
24
24
24
24
26
28
28
32
32
33
34
Troubleshooting
Specification
Common washing problems
Troubleshooting
Specification
35
36
38
roduct Features
P
Washer doesn't operate while the lid is open. If the lid is open during the wash, rinse or spin cycles, the operation stops for safety.
Fuzzy Logic Control
A built-in load sensor automatically detects and measures the laundry load and a microprocessor optimizes washing conditions such as ideal water level, washing time and optimum detergent quantity indication.
Advanced technology is built into the Electronic Control System which ensures the best washing result.
START
SENSING
Laundry Sensor
Water Level
Sensor
SETTING
Optimum Washing
Condition
WASHING
AUTO
POWER
OFF
Turbo drum washing
When "Punch + 3" washing wings turn, the washing tub turns in the opposite direction. This makes the both sides current of water which improve washing-performance by rubbing clothes strongly.
3 Step washing
3 step washing makes best washing performance with low tangling.
Rubbing
Rubbing and
Shaking
Shaking and
Disentangling
Auto Restart
In the event of a power failure, the washing machine will automatically start its cycle from the point of interruption when power is resumed.
Lint Filter
Lint and loose threads from laundry generated during the washing cycle are caught by the lint filter for a cleaner wash.
Note :
Be sure to remove the unit from all packing base, otherwise the machine will not be able to operate properly.
Introduction
3
afety Information
S
Read carefully and thoroughly through this booklet as it contains important safety information that will protect the user from unexpected dangers and prevent potential damages to the product.
This booklet is divided into 2 parts : Warning and Caution.
: This is a warning sign specifying user’s applications which might be dangerous.
: This is a sign specifying ‘Strictly Forbidden’ applications.
WARNING
CAUTION
WATER HEATER SAFETY
PROPER INSTALLATION
: Failure to comply with the instructions under this
sign may result in major physical injuries or death.
: Failure to comply with the instructions under this sign may result in minor physical injuries or damages to the product.
WARNING
Under certain conditions hydrogen gas may be produced in a water heater that has not been used for two weeks or more. Hydrogen gas can be explosive under these circumstances. If the HOT water has not been used for two weeks or more, prevent the possibility of damage or injury by turning on all Hot w ater faucets and allowing them to run for several minutes. Do this before using any electrical appliance which is connected to the HOT water system. This simple procedure will allow any built-up hydrogen gas to escape. Since the gas is flammable, do not smoke or use an open flame or appliance during this process.
CAUTION
The base opening must not be obstructed by carpeting when the washing machine is installed on a carpeted floor.
Install or store where it will not be exposed to temperatures below freezing or exposed to the weather.
If the product is exposed to such conditions,electric stock, fire, break down or deformation may occur.
Properly ground washer to conform with all governing codes and ordinances. Follow details in Installation Instructions.
If not grounded properly, break down and leakage of electricity may occur, which may cause electric shock.
Must be positioned so that the plug is accessible.
If the plug is placed between the wall and the machine, it may get damaged, possibly causing fire or electric shock.
• Make sure the plug is completely pushed into the outlet.
Failure to do so may cause electric shock and fire due to overheating.
• Do not connect ground to a gas pipe.
It can cause explosion.
• Do not connect ground to telephone wires or lightning rods.
This may be dangerous during electrical storms.
4
Introduction
afety Information
S
YOUR LAUNDRY AREA
WHEN USING THE WASHER
WARNING
• Keep the area underneath and around your appliances free of combustible materials such as lint, paper, rags, chemical, etc.
Operating with such materials around the machine may trigger explosion or fire.
Close supervision is necessary if this appliance is used by or near children. Do not allow children to play on, with, or inside this or any other appliance.
There is potential danger that children might drown in the tub.
Do not touch the power plug with a wet hand.
It will cause electric shock
Do not put your hand, foot or anything under the washing machine while the washing machine is in operation.
There is a rotating mechanism under the machine, so you could be injured.
CAUTION
• Use this appliance only for its intended purpose as described in this Owner’s Manual.
• The laundry process can reduce the flame retardancy of fabrics. To avoid such a result, carefully follow the garment manufacturer’s wash and care instructions.
• To minimize the possibility of electric shock, unplug this appliance from the power supply or disconnect the washer at the household distribution panel by removing the fuse or switching off the circuit breaker before attempting any maintenance or cleaning.
NOTE : Pressing Power button to turn off does NOT
disconnect the appliance from the power supply.
• Make sure that drainage is working properly.
If water is not drained properly, your floor may get flooded. Flooded floors may induce electricity leakage, further resulting in electric shock or fire.
• If, during spinning, opening the lid does not stop the tub within about 15 seconds, immediately discontinue operating the machine.
Call for repair. A machine that spins with its door open may cause injuries.
Never reach into washer while it is moving. Wait until the machine has completely stopped before opening the lid.
Even slow rotation can cause injury.
Never attempt to operate this appliance if it is damaged, malfunctioning, partially disassembled, or has missing or broken parts, including a damaged cord or plug.
Operating with a damaged plug may cause electric shock.
Do not use water hotter than 60°C.
Use of excessively hot water may cause damage to fabrics or cause leakage of water.
Introduction
5
afety Information
S
WHEN USING THE WASHER
WHEN NOT IN USE
WARNING
Do not use a plug socket and wiring equipment for more than their rated capacity.
Exceeding the limit may lead to electric shock, fire , break down, and/or deformation of parts.
Do not mix chlorine bleach with other household chemicals such as toilet cleaners, rust removers, acids (such as vinegar) or product containing ammonia.
Mixing different chemicals can produce toxic gases which may cause death.
Do not wash or dry articles that have been cleaned in, washed in, soaked in, or spotted with combustible or explosive substances (such as wax, oil, paint, gasoline, dry­cleaning solvents, kerosene, etc). Do not add these substances to the wash water. Do not use or place these substances around your washer or dryer during operation.
It may ignite or explode.
CAUTION
• Turn off water faucets to relieve pressure on hoses and valves and to minimize leakage if a break or rupture should occur. Check the condition of the fill hoses; they may need replacement after 5years.
• When the air temperature is high and the water temperature is low, condensation may occur and thus wet the floor.
• Wipe off dirt or dust on the contacts of the power plug.
Using unclean power plug may cause fire.
• Before discarding a washer, or removing it from service, remove the washer lid to prevent children from hiding inside.
Children may be trapped and suffocated if the lid is left intact.
Do not attempt to repair or replace any part of this appliance unless specifically recommended in this Owner’s Manual, or in published user­repair instructions that you understand and have the skills to carry out.
Operating the machine with improperly replaced parts may be a cause for fire or electric shock.
Do not tamper with controls.
It may lead to electric shock, fire , break down, deformation.
Do not yank the power cord in an attempt to disconnect the power plug. Securely hold the power plug to unplug the machine.
Failure to observe these instructions may cause electric shock or fire due to short­circuit .
When you are cleaning the washing machine, do not apply water directly to any part of the washing machine.
It will cause short circuit and electric shock.
6
Introduction
dentification of Parts
I
Body
POWDER DETERGENT
12
14
13
BOX FOR DELAYED WASHING
SOFTENER INLET Softener will automatically flow into the tub.
INLET HOLE F OR BLEACH
FUNCTION SELECTOR
TUB
START/PAUSE
*
BUTTON
Use to start or stop the washing machine temporarily.
*
WATER SUPPLY HOSE
Make sure the water does not leak.
POWER PLUG
If the supply cord is damaged, it must be replaced by the manufacturer or its service agents or similarly qualified person in order to avoid a hazard.
LINT FILTER
Clean regularly to stop linting on the clothes load.
*
CASTER
Use for easy translocation
7
30
6
ADJUSTABLE LEGS
6
(2 adjustable legs are optional. Some models have provision for only 1 adjustable leg).
Use to level the washing machine for correct balance & spin operation.
WASHING WINGS
Vertical movement of washing punch can be operated when a sufficient amount of laundry is deposited. Set the proper water level, an excessive amount of water may increase entanglement of laundry.
Accessories
Water supply hoses
Note
"*" Parts can be different according to the model.
Drain hose
Snap Ring
DRAIN HOSE
Keep the drain hose flipped down while washing is in process.
BASE
BASE
Anti-rat cover
Screw
Introduction
7
lacing, Leveling and Installation
P
Improper installation of the washer may cause noise and malfunctioning.
1.
The ventilating openings in the base area must not be obstructed by carpeting when the washing machine is
Note :
installed on a carpeted floor. Install the washing machine on a level and firm
2. surface, any tilt should be less than 4°.
How to adjust leveling
Adjustable leg
Turn the adjustable legs to set the washer
(2 adjustable legs are optional. Some models have provision for only 1 adjustable leg).
H
Distance between drain hose and the wall
Distance between drain hose and the wall should be more than 10cm, and the distance between the other part or the rear part and the wall should be more than 2 cm.
horizontal (Both the front legs).
Don't add anything under back side legs.
.
More than 2cm
Installation area
1
Install the washer on flat and firm surface.
Checking level
2
The Basement is not flat, fill the water just touching the Pulsator and see uniform distribution. If not, adjust the legs as shown in the figure.
Top View
Checking Proper placement
3
More than 2cm
Anti-rat cover installation
Insert the anti rat cover firmly from back side or Front side of washing machine and screw it.
High Base
Low Base
8
Installation
More than 10cm
FIXING POSITION
Adjustable Leg
Screws
Anti Rat Cover
Press the corners of the m achine diagonally as shown in the figure, I f any movement is observed, adjust the legs for proper l eveling.
Moving of the Machine
Casters are provided for easy translocation of your machine
* Grip the machines properly as shown in fig. * Tilt the machine towards your side at a angle
O O
45 ~ 55 .
Casters
Note : * Be careful that you should not drop the machine.
* Never move the machine on casters when there is load inside. * Applicable for : WF-T7512FN and WF-T7516LN.
onnecting Water Supply Hose
C
Normal Type
Separate Middle connector from Water Supply Hose
1
Separate Middle connector from the Wa ter Supply Hose by pulling the Pressing Rod and the Pressing Handle that is attached to the Wa ter Supply Hose
Loosen the fixed nuts to connect the connector to the tap
2
Untighten the screw of the connector so that the tap can be placed in the middle.
NOTE
In case tap is too large.
If the tap diameter is too large or is square, untighten the 4 screws and remove the guide plate. Then follow step1
Fixing Connectors to the Tap
3
Push the upper connector up till the rubber packing is in tight contact with the tap. Then tighten the 4 screws.
Fixing Upper Connector and Middle Connector
4
Remove the fixed sticker in between the Upper and Middle Connectors. Tighten the connectors by holding one connector and twist middle connector to the right.
Connecting Middle Connector and Water Supply Hose
5
Press down the pressing rod of the Wa ter Supply Hose which was separated from middle connector (refer to Step1) and then join it to the middle connector.
(Normal tap without thread & one touch type inlet hose.)
Middle connector
.
.
Water Supply Hose
Guide plate
Connector
Connector
Fixed sticker
Pressing rod
Fixed Sticker Pressing Handle
Pressing Rod
Water Supply Hose
Rubber packing screw
Fixed sticker
Rubber packing
Middle Connector
Connector Middle
Connector
Pressing handle
Check for water leakage
6
After connecting the hose, open the tap to check for any water leakage. If the connection leaks, close the tap and start again from step 1. If you skip step 1, water leakage may occur.
Installation
9
onnecting Drain Hose
C
§ How to connect the drain hose
Insert the drain hose to the connect­ing area at the body.
1 2
1.
Press the hose clip.
2.
While pressing, push the hose towards the body. Release the hose clip after pushing the
3. hose.
Less than 2m
The hose is placed over a doorsill.
The hose is clogged by alien substances.
Make sure that the hose is not crushed.
Less than 3m
Less than 6cm
Less than 10cm
Make sure that the hose is not crushed between the wall and the washer
Avoid submerging the end of hose.
.
Extension hose is used.
10
Installation
reparation BeforeWashing
P
Care Labels
* Look for acare label on your clothes This will tell you about the fabric content of your g arment
and how it should be washed. Sort clothes into loa ds that can be washed with the same wash cycle, Water Temperature and spin speed.
Sorting
To get the best results, different fabrics need to be washed in different ways.
SOIL (Heavy, Normal, Light) COLOR (Whites, Lights, Darks)
LINT (Lint Producers, Collectors)
Lint Produ cers Lint Collectors
Check before Loading
Check all po ckets to make sure that they are emtpy. Things such as nails, hairclips,, matches, pens, coins, and keys can damage both your washer and your clothes.
Mend any torn garments or loose buttons. Tears or holes may become larger during washing.
Remove belts, underwires, etc. to prevent damage to the machine or your clothes.
Pretreat any dirt and stains.
• Make sure the clothes are washable in water.
• Check the washing instructions.
• Remove tissue in pockets.
Pretreatment on stains or heavy soil
Pretreat shirt collars and cuffs with a pre-wash product or liquid Detergent when placing them in the washer.
Before washing treat special stains with bar soaps, liquid Detergent or a paste of water and granular Detergent.
• Use a pretreat soil and stain remover.
Treat stains AS SOON AS POSSIBLE. The longer they are left the harder they are to remove.
(For more detail refer to page15)
Loading
Do not wash fabrics containing flammable materials (waxes, cleaning fluids, etc.)
Load Size
The WATER LEVELF should just cover the clothes. Adjust the load size accordingly. Loosely load clothes not higher than the top row of holes in the washer tub. To add items after washer has started, press Start button and submerge additional items. Close the lid and press Start button again to restart.
Light and Large-sized clothing
Clothes like downs and woollens are light weight, large and float easily. Use a nylon net and wash them in a small amount of water. If the laundry floats during the wash cycle, it may become damaged. Use dissolved Detergent to prevent the Detergent from clumping.
Long laundry items
Use nylon nets for long, DELICATE items. For laundry with long strings or long length , a net will prevent tangling during washing. Fasten zippers, hook, and strings to make sure that these items don't snag on other clothes.
Nylon net is not supplied by LG.
Separate clothes according to the type and amount of soil. Separate white fabrics from colored fabrics. Separate lint producers and lint collectors.
Terry cloth, Chenille Towels, Nappies, Diapers Synthetics, Corduroy, Permanent Press, Socks
WIRE
.
Before Starting to Wash
11
se of Water, Detergent, Bleach and Softener
U
Deposit laundry and press the START/
1
PAUSE button.
START PAUSE
Press
H
If you feel the water level is not as per your choice you can change the water level manually.
Without water, the pulsator turns to the left and right for
2
about 4 seconds to sense the amount of laundry.
l
If either the inner-tub contains water or the laundry is wet, water level may be different from the initial set level.(It is not malfunctioning. It is the proper water setting for laundry.)
l
Bulky and light laundry may cause a water level lower than usual. In this case, manually adjust the water level.
A proper water level and the amount of
3
detergent is dis­played.
WATER DETERGENT
WF-T7062DN, WF-T7512FN WF-T7516LN, WF-N7035DN
WF-N6836DN, WF-N6866DN
WF-T7516MN, WF-N7066MN
Usage of Detergent
In case of small water level:
l
The following indication of the amount of detergent is based on a concentrated detergent. (1 detergent cup: around 40g)
WATER DETERGENT
XL
L
M
S
WATER LEVEL
X
concentrated detergent (1/2 cup).
l
Regular(high-density) detergent uses
1.5 times as much as the indicated amount.
XL
L
M
S
WATER LEVEL
X
Powder Detergent Box
WF-T7062DN, WF-T7512FN
WF-T7516LN, WF-N7035DN
WF-N6836DN, WF-N6866DN
Note : Follow detergent manufacturer's instructions for quantity of detergent.
H
Use only powder detergent.
12
Before Starting to Wash
WF-T7516MN, WF-N7066MN
Where you deposit the detergent
Loading...
+ 28 hidden pages