LG WD-65130F User Manual
Washing Machine
OWNER'S MANUAL
WD-10130(5)F
WD-80130F
WD-65130F
Thank you for buying a
LG Fully Automatic Washing machine.
Please read your owners manual carefully, it provides
instructions on safe installation, use and maintenance.
Retain it for future reference.
Record the model and serial numbers of your washing machine.
Q-t-Q
Temp.
roduct Feature
Jumbo drum
LG’s jumbo drum can wash about 40% more load than
conventional washing machines. A bigger drum improves the wash
performance.
More economical by Intelligent Wash System
Intelligent Wash System detects the amount of load and water
temperature, and then determines the optimum water level and
washing time to minimize energy and water consumption.
Child-Lock
'—Option
The Child-Lock system has been used to prevent children from
pressing any button to change the program during operation.
Low noise speed control system
By sensing the amount of load and balance, it evenly distributes
load to minimize the spinning noise level.
ontents
Warnings............................................................................................................3
Installation.........................................................................................................5
Care before washing......................................................................................11
Adding detergent............................................................................................12
Function...........................................................................................................13
How to use washer..........................................................................................14
Maintenance....................................................................................................21
Troubleshooting guide
Terms of Warranty...........................................................................................27
pf10n I.I.I.I.I.I.I.I.I.I.I.I.I.I.I.I.I.I.I.I.I..I.I.I.I.I.I.I.I.I.I.I.I.I.I.I.I.I.I
...................................................................................
24
w
arnings
READ ALL INSTRUCTIONS BEFORE USE
▲ WARNING!
For your safety, the information In this manual must be followed to minimize
the risk of fire or explosion, electric shock, or to prevent property damage,
personal injury, or loss of life.
IIVIPORTANT SAFETY INSTRUCTIONS
WARNING ! To reduce the risk of fire, eiectric shock, or injury to persons when using
the washer, follow basic precautions, including the following:
' Do not install or store the washer where it will
be exposed to the weather.
' Do not tamper with controls,
> Do not repair or replace any part of the washer
or attempt any servicing unless specifically
recomnnended in the user-maintenance
instructions or published user-repair instructions
that you understand and have the skills to carry
out.
' Keep the area underneath and around your
appliances free of combustible materials such as
lint, paper, rags, chemicals, etc.
' Close supervision is necessary if Hlis appliance
is used by or near children.
Do not allow children to play on, wHh, or inside
this or any other appliance,
> Do not leave the washer door open.
An open door could entice children to hang on
the door or crawl inside the washer.
> Never reach into washer while it is moving. Wait
until the drum has completely stopped.
I The laundry process can reduce the flame
retardant of fabrics.
> Do not wash or dry articles that have been
cleaned in, washed in, soaked in, or spotted with
combustible or explosive substances {such as
wax, oil, paint, gasoline, degreasers, drycleaning solvents, kerosene, etc.) which may
ignite or explode.
> To avoid such a result, carefully follow the
garment manufacturer's wash and care
instructions.
> Do not slam the washer door closed or try to
force the door open when locked. This could
result in damage to the washer.
■ To minimize Hie possibility of electric shock,
unplug this appliance from the power supply or
disconnect the washer at the household
distribution panel by removing the fuse or
switching off the circuit breaker before
attempting any maintenance or cleaning.
' Never attempt to operate this appliance if it is
damaged, malfunctioning, partially
disassembled, or has missing or broken parts,
including a damaged cord or plug.
SAVE THESE INSTRUCTIONS
GROUNDING INSTRUCTIONS
Tills appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk
of electric shock by providing a path of least resistance for electric current. This appliance is equipped with
a cord having an equrpment-grounding conductor and grounding plug. The plug must be plugged into an
appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinance.
* Do not use an adapter or olhenivise defeat the grounding plug.
* If you don’t have the proper ouHel, consult an electrician.
WARNING ! Improper connection of the equipment-grounding conductor can result in risk of electric
shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the appliance is
property grounded. Do not modify the plug provided with the appliance - if it does not fit the outlet, have a
proper outlet installed by a qualified electrician.
pecification
Power plug
• If the supply cord is damaged,
it must be replaced by the
manufacturer or its service agents
or a similarly qualified person in
order to avoid a hazard.
Control panel
Drum
Lower cover
Adjustable feet
Lower cover cap
Name
Power supply
Size
Weight / Max*Watt
Wash capacity
Spin speed
Water consumption
■ Permissible water pressure : 0.3-1 Okgf/dll' (30-1 OOOkPa)
^ The appearance and specifications may be varied without notice to raise the units
quality.
: Front loading washing machine
: 220-240V-, 50Hz
: 600mm(W) x600mm(D) x850mm(H)
: 67kg / 2200W
: Refer to the Rating Label
: No Spin/400/500/650[WD-65130F]
No Spin/400/600/800[WD-80130F]
No Spin/400/800/1000[WD-10130(5)F]
: 67 £ (9.6 £ / kg )
nstallation
Install or store where it will not be exposed to temperatures below freezing or exposed to the weather.
Properly ground washer to conform with all governing codes and ordinances.
The base opening must not be obstructed by carpeting w hen the washing machine is installed on a
carpeted floor.
■ Transit bolts
The appliance is fitted with transit boils to prevent internal damage during transport.
■ Removing transit bolts
1. To prevent internal damage during
transport, the special 4 bolts are locked.
Before operating the washer, remove
the bolts along with the rubber bungs.
♦ If they are not removed, it may cause heavy
vibration, noise and malfunction.
3. Take out the 4 bolts along with the rubber
bungs by slightly twisting the bung. Keep
the 4 bolls and the spanner for future use.
• Whenever the appliance is transported, the
transit bolts must be refitted.
2 . Unscrew the 4 bolls with
the spanner supplied.
4. Close the holes with the caps supplied.
nstallation
Installation place requirement
Level floor:
Allowable slope under entire washer is 1 ’
Power outlet:
Must be within 1.5 meters of either side of location
of washer. Do not overload the outlet with more
than one appliance.
Additional Clearance :
For wall, door and floor modeling is required.
(10cm: rear/2cm:right & left side)
Do not place or store laundry products on top of
washer at any times.
They can damage the finish or controls.
BS Plug Safety Details (For U.K. User)
IMPORTANT
THE WIRES IN THIS MAINS LEAD ARE COLOURED IN
ACCORDANCE WITH THE FOLLOWING CODE;
GREEN AND YELLOW: EARTH
BLUE: NEUTRAL
BROWN: UVE
This appliance must be earthed
ahd Ifetw^ilh^ -
As the colours of the wires in the rnains lead of this apparatus may not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows:
The wire which is coloured Green and Yellow must be connected to the terminal in the plug which is marked with the
letter E or by the earth symbol (^) or coloured Green or Green and Yellow.
The wire which is coloured Blue must be connected to the terminal which is marked with the letter N or coloured Black.
The wire which is coloured Brown must be connected to the terminal which is marked with the letter L or coloured Red.
If a 13 amp (BS 1363) plug is used, fit a 13 amp BS 1362 fuse.
nstallation
■ Electrical connection
1. Do not use an extension cord or double adapter.
2. If the supply cord is damaged, it must be replaced by the manufacturer or its service agents
or similarly qualified person in order to avoid a hazard.
3. Always unplug the machine and turn off the water supply after use.
4. Connect the machine to an earthed socket in accordance with current wiring regulations.
5. The appliance must be positioned so that the plug is easily accessible.
■ Washing Machine is to be connected to the water mains using new hose-
sets and that old hose-sets should not be used.
■ Connecting water supply hose
► Water supply pressure must be between
30kPa ami iOOOkPa (OJ-Wkg/cnf)
^Don 't strip or crosstkread when coufiecting
Met hose to the valve.
^If the water supply pressure is more than
lOOOkPa, a deconipression device should be
in stalled.
* Two rubber seals are supplied with the
water inlet hoses these are in order to
prevent water leaks.
* Check water tightness of washing
machine connections by turning the tap
completely on.
• Periodically check the condition of the
hose and replace the hose if necessary.
• Make sure that there is no kink on the
hose and that it is not crushed.
nstallation
Normal Tap without thread & screw type inlet hose
T. Unscrew the fixing screw to
attach the tap.
Upper
CcnredG
Füdng screw
2. Push the connector up till the
rubber packing is in tight contact
with the tap, Then tighten the 4
screws.
FklbberpBddnf]
Upper
C«irc(;lur
3. Push the water supply hose
vertically upwards so that the
rubber packing within in the
hose can adhere completely to
the tap and then tighten it by
screwing it to the right.
Normal Tap without thread & one touch type inlet hose (Single inlet models)
1. Untighten the upper connector 2. Push the upper connector up'
screw. thA nihhpr n^rkinn iA in tinht
Rubb«i
packing
Fiiirg &318W
' In case the diameter of the tap is
large remove the guide plate
UtMl«
COniiKtoi
the rubber packing is in tight
contact with the tap. Then
tighten the 4 screws.
Rubber packng
Connecter-..
Middk—
connector
3. Connect the water supply hose
to the middle connector,
pushing the plate down.
upper
Comector
Water Sjppljf
hose
Pi3ie
Guide plate
Us«d the horlizontal tap
Horizontal tap
Extension tap
Square tap
Connector
• Turn the middle connector not
to have water leaked.
Make sure that the rubber seal
is inside the hose connector.
HoM ponnector
Rubber îmI
To separate the water supply
hose from the middle connector
shut off the tap. Then pull the
inlet hose down, pushing the
plate down.
■ Your machine comes with only
cold water connection.
Make sure that there are no
kinks in the hose and that it is
not crushed.
8
nstallation
Installation of drain hose
a 100 em
'
------
ca. 145 cm
f
When installing the drain hose sink,
secure it tightly with a string.
Proper securing of the drain hose will
protect the floor from damage due to
water leakage.
The drain hose should not be placed
higher than 100 cm above the floor.
Proper securing of the drain hose
protect the floor from damage due to
water leakage.
When the drain hose is too long, do not
force back into the washer. This
cause abnormal noise.
Loading...