LG WD-12433BDA Owner’s Manual

STEA M WASH E R

USE R’S GU IDE &

INS TA LLATIO N I NST RU CTI ONS

Before beginning installation, read these instructions

carefully. This wll simplify installation and ensure that the

washer is installed correctly and safely. Leave these instructions

near the washer after installation for future reference.

STEA M WASH E R

LAVA DOR A

GUÍ A D EL USUAR IO E

INS TRUCC ION ES DE IN STALACI ÓN

Antes de comenzar la instalación, lea atentamente estas

instrucciones. Esto simpliﬁcará la instalación y asegurará que

la lavadora está instalada en forma correcta y segura. Conserve

estas instrucciones cerca de la lavadora luego de la instalación

para futuras consultas.

To contact LG Electronics, 24 hours a day, 7 days a week:

1-800-243-0000

Or visit us on the Web at: us.lge.com Número telefónico de LG Electronics, las 24

horas del día, 7 días a la semana:

1-800-243-0000

O visítenos en la Web en: us.lge.com

To contact LG Electronics, 24 hours a day, 7 days a week:

1-888-LGCANADA

Or visit us on the Web at: ca.lge.com Pour contacter LG Electronics, 24 heures par

jour, 7 jours par semaine :

1-888-LGCANADA

Ou visitez notre site Web à l’adresse : ca.lge.com

STEA M WASH E R

GUI DE DE L’U TILIS AT EUR ET

DIR ECT IVE S D ’INSTA LLATIO N

Avant de commencer à installer votre machine à laver, lisez at-

tentivement ces instructions. Cela simpliﬁera votre installation

et assurera que la machine à laver est installée correctement et

en toute sécurité. Conservez ces instructions à proximité de la

machine à laver après son installation, pour référence future.

Mo de l/ Mo de lo /M od èl e

WM2487H*MA

Designed specially to use only HE (High-Efﬁciency) detergent

Diseñada especíﬁcamente para usar con el detergente tipo HE (Alta eﬁciencia)

Spécialement conçu pour utilisation avec un détergent haute efﬁcacité uniquement

Protocol P172 Sanitization Performance of Residential and Commercial, Family Sized Clothes Washers

Protocolo P172 Ejecucion de Saneamiento en la zona residencial y comercial, lavodoras del uso del hogar

Protocole P172 Performance en matière d'assainissement des laveuses résidentielles et commerciales de grande taille

P/No. MFL31245179

I N T RO D U C T I O N

IMPORTANT SAFETY INSTRUCTIONS

Basic Safety Precautions .................................. 3–6

PARTS AND FEATURES

Special Features ..................................................... 7

Key Parts and Components ................................... 8

INSTALLATION INSTRUCTIONS

Choose the Proper Location .................................. 9

Clearances ............................................................. 9

Flooring ................................................................ 10

Installations With Optional Pedestal Base

or Stacking Kit ...................................................... 10

Unpacking and Removing Shipping Bolts ........... 11

Connecting the Water Lines ................................. 12

Connecting the Drain Line .................................... 13

Leveling the Washer ............................................. 14

HOW TO USE

Sorting Wash Loads ............................................. 15

Selecting Detergent .............................................. 16

About the Dispenser ............................................. 16

Loading the Dispenser ......................................... 17

Control Panel Features ......................................... 18

Cycle Guide .......................................................... 19

The LED Display ................................................... 20

Operating the Washer .......................................... 21

Steam Cycles ....................................................... 22

Cycle Setting Buttons .......................................... 23

Cycle Option Buttons .......................................... 24

Special Functions ................................................. 24

CARE AND CLEANING

Regular Cleaning .................................................. 26

Cleaning the Washer ............................................ 27

Maintenance ................................................... 28–29

THANK YOU!

Congratulations on your purchase

and welcome to the LG family.

Your new LG Steam Washer™

combines the most advanced

washing technology with simple

operation and high efficiency.

By following the operating and care

instructions in this manual, your

washer will provide you with many

years of reliable service.

Product Registration Information

Model: Serial Number: Date of Purchase:

The model and serial number can be located on the rating plate on the front of the washer.

TROUBLESHOOTING

Normal Sounds You May Hear ............................. 30

Before Calling for Service ............................... 30–32

SPECIFICATIONS/OPTIONAL ACCESSORIES

Key Dimensions and Speciﬁ cations ..................... 33

Optional Accessories ........................................... 33

WARRANTY ................................................... 34

I M P O RTAN T S A F E T Y I N S T R U C T I O N S

READ ALL INSTRUCTIONS BEFORE USE wWARNING For your safety, the information in this manual must be

followed to minimize the risk of ﬁre or explosion, electric shock, or to prevent property damage, personal injury, or loss of life.

Your Safety and the safety of others is very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol and either the word DANGER or WARNING. These words mean:

wDANGER: You can be killed or seriously injured if you don’t immediately follow instructions. wWARNING: You can be killed or seriously injured if you don’t follow instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.

I M P O RTAN T S A F E T Y I N S T R U C T I O N S

READ ALL INSTRUCTIONS BEFORE USE wWARNING For your safety, the information in this manual must be

followed to minimize the risk of ﬁ re or explosion, electric shock, or to prevent property damage, personal injury, or loss of life.

BASIC SAFETY PRECAUTIONS

wWARNING: To reduce the risk of fire, electric shock, or injury to persons when using this

appliance, follow basic precautions, including the following.

• Before use, the washer must be properly installed as described in this manual.

• Do not wash articles that have been previously cleaned in, washed in, soaked in, or spotted with gasoline, dry cleaning solvents, or other ﬂ ammable or explosive substances, as they give off vapors that could ignite or explode.

• Do not add gasoline, dry cleaning solvents, or other ﬂ ammable or explosive substances to the wash water. These substances give off vapors that could ignite or explode.

• Under certain conditions, hydrogen gas may be produced in a hot water system that has not been used for 2 weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot water system has not been used for such a period, before using the washer, turn on all hot water faucets and let the water ﬂ ow from each for several minutes. This will release any accumulated hydrogen gas. As the gas is ﬂ ammable, do not smoke or use an open ﬂ ame during this time.

• Do not allow children to play on or in the washer. Close supervision of children is necessary when the washer is used near children.

• Before the washer is removed from service or discarded, remove the door to prevent children from climbing inside.

• Do not install or store the washer where it will be exposed to the weather or freezing temperatures.

• Do not tamper with controls.

• Do not repair or replace any part of the washer or attempt any servicing other than as described in this manual. We strongly recommend that any service be performed by a qualiﬁ ed individual.

• See Installation Instructions for grounding requirements.

• ALWAYS follow the fabric care instructions supplied by the garment manufacturer.

• Do not place items exposed to cooking oil in your washer. Items contaminated with cooking oils may contribute to a chemical reaction that could cause a load to catch ﬁ re.

• Use fabric softeners or products to eliminate static only as recommended by the manufacturer.

• This washer is not designed for maritime use or for mobile installations such as in RVs, aircraft, etc.

• Turn off the water taps and unplug the washer if the machine is to be left for an extended period of time, such as during vacations.

• Packaging material can be dangerous for children. There is a risk of suffocation! Keep all packaging from children.

• Always check the inside of the washer for foreign objects before loading laundry. Keep the door closed when not in use.

GROUNDING INSTRUCTIONS

This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance is equipped with a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

wWARNING: Improper connection of the equipment-grounding conductor can result in risk

of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the appliance is properly grounded. Do not modify the plug provided with the appliance. If it does not fit the outlet, have a proper outlet installed by a qualified electrician. Failure to follow these warnings can cause serious injury, fire, electrical shock, or death.

I M P O RTAN T S A F E T Y I N S T R U C T I O N S

READ ALL INSTRUCTIONS BEFORE USE wWARNING For your safety, the information in this manual must be

followed to minimize the risk of ﬁre or explosion, electric shock, or to prevent property damage, personal injury, or loss of life.

SAFETY INSTRUCTIONS FOR INSTALLATION

wWARNING: To reduce the risk of fire, electric shock, or injury to persons when using this

appliance, follow basic precautions, including the following.

• Refer to INSTALLATION INSTRUCTIONS for detailed grounding procedures. Installation instructions are packed in the washer for installer’s reference. If the washer is moved to a new location, have it checked and reinstalled by a qualiﬁed service person. Failure to follow this warning can cause serious injury, ﬁre, electrical shock, or death.

• Do not, under any circumstances cut or remove the third (ground) prong from the power cord. Failure to follow this warning can cause serious injury, ﬁre, electrical shock, or death.

• For personal safety, this appliance must be properly grounded. Failure to follow this warning can cause serious injury, ﬁre, electrical shock, or death.

• The power cord of this appliance is equipped

with a 3-prong (grounding) plug which mates with a standard 3-prong (grounding) wall outlet to

minimize the possibillty of electric shock hazard from this appliance.

• This washer must be plugged into a 120VAC, 60Hz grounded outlet. Failure to follow this warning can cause serious injury, ﬁre, electrical shock, or death.

• Have the wall outlet and circuit checked by a

qualiﬁed electrician to make sure the outlet is properly grounded. Failure to follow this warning

can cause serious injury, ﬁre, electrical shock, or death.

• Where a standard 2-prong wall outlet is

encountered, it is your personal responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet. Failure to follow

this warning can cause serious injury, ﬁre, electrical shock, or death.

• Do not install on carpet. Install washer on a solid ﬂoor. Failure to follow this warning can cause serious leak damage.

• Do not remove ground prong. Do not use an

adapter or extension cord. Plug into a grounded 3-prong outlet. Failure to follow these warnings can

cause serious injury, ﬁre, electrical shock, or death.

• The washer should always be plugged into its

own individual electrical outlet which has a voltage rating that matches the rating plate. This

provides the best performance and also prevents overloading house wiring circuits which could cause a ﬁre hazard from overheated wires.

• Never unplug your washer by pulling on the power cord. Always grip plug ﬁrmly and pull straight out from the outlet. Failure to follow this warning can cause serious injury, ﬁre, electrical shock, or death.

• Repair or replace immediately all power cords

that have become frayed or otherwise damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either end. Failure

to follow this warning can cause serious injury, ﬁre, electrical shock, or death.

• When installing or moving the washer, be careful not to pinch, crush, or damage the power cord. Failure to follow this warning can cause serious injury, ﬁre, electrical shock, or death.

• The washer must be installed and electrically

grounded by a qualiﬁed service person in accordance with local codes to prevent shock

hazard and assure stability during operation.

• Washer is heavy. Two or more people may be need to install and move the appliance. Failure to do so can result in back or other injury.

• Store and install the washer where it will not

be exposed to temperatures below freezing or exposed to outdoor weather conditions. Failure to

follow this warning can cause serious leak damage.

• Do not install the washer in humid spaces to reduce the risk of electric shock. Failure to follow this warning can cause serious injury, ﬁre, electrical shock, or death.

I M P O RTAN T S A F E T Y I N S T R U C T I O N S

READ ALL INSTRUCTIONS BEFORE USE wWARNING For your safety, the information in this manual must be

followed to minimize the risk of ﬁ re or explosion, electric shock, or to prevent property damage, personal injury, or loss of life.

SAFETY INSTRUCTIONS FOR USE, CARE AND CLEANING, AND DISPOSAL

wWARNING: To reduce the risk of fire, electric shock, or injury to persons when using this

appliance, follow basic precautions, including the following.

•

Unplug the washer before cleaning to avoid the risk of electric shock.

•

Never use harsh chemicals, abrasive cleaners, or solvents to clean the washer. They will

damage the ﬁ nish.

•

Do not put oily or greasy rags or clothing on top of the washer. These substances give off

vapors that could ignite the materials.

•

Do not wash items that are soiled with vegetable or cooking oil. These items may

contain some oil after laundering. Due to the remaining oil, the fabric may smoke or catch ﬁ re by itself.

•

Disconnect this appliance from the power supply before attempting any user maintenance. Turning the controls to the OFF position does not disconnect this appliance from the power supply. Failure to follow this

warning can cause serious injury, ﬁ re, electrical shock, or death.

•

Do not combine laundry products for use in one load unless speciﬁ ed on the label.

•

Do not mix chlorine bleach with ammonia or acids such as vinegar. Follow package directions when using laundry products.

Incorrect usage can produce poisonous gas, resulting in serious injury or death.

•

Do not reach into the washer while parts are moving. Before loading, unloading or adding items, push in the cycle selector knob and allow the drum to coast to a complete stop before reaching inside. Failure to follow this

warning can cause serious injury, ﬁ re, electrical shock, or death.

•

Do not allow children to play on or in the washer. Close supervision of children is necessary when the washer is used near children. As children grow, teach them the proper, safe use of all appliances. Failure to

comply with these warnings could result in serious personal injuries.

•

Destroy the carton, plastic bag and other packing materials after the washer is unpacked. Children might use them for play. Cartons covered with rugs, bedspreads, or plastic sheets can become airtight chambers.

Failure to comply with these warnings could result in serious personal injuries or death.

•

Keep laundry products out of children’s reach. To prevent personal injury, observe all warnings on product labels. Failure to comply with these

warnings could result in serious personal injuries.

•

Remove the door to the washing compartment to avoid the danger of children or small animals getting trapped inside before your washer is removed from service or discarded. Failure

to do so can result in serious personal injury or death.

SAVE THESE INSTRUCTIONS

PA RT S A N D F E ATU R E S

SPECIAL FEATURES

DETERGENT DISPENSER DRAWER

This four-compartment drawer provides separate dispensers for prewash and main wash detergent, liquid bleach, and liquid fabric softener.

CONTROL PANEL WITH LED DISPLAY

Simple electronic controls are user-friendly. The LED display indicates cycle options and cycle time during operation.

EASY-ACCESS LOCKING DOOR

Extra-large door locks during operation and features a delay to prevent the door from being opened until the washer interior has cooled and the water level has lowered.

HIGH-EFFICIENCY STEAM CYCLES

During LG’s unique high-efficiency STEAM cycles, the steam nozzle injects fabrics with hot steam to gently remove tough stains.

ROLLERJETS

The RollerJet system enhances wash performance while reducing fabric wear. Integrated jets spray clothes to further improve washing efficiency.

INTERIOR DRUM LIGHT

The drum light illuminates the washer interior for greater visibility when loading and unloading. The ultra long-life LED bulbs should never need replacement.

DIRECT-DRIVE MOTOR

Direct-drive motor eliminates the belt and pulleys found on most washers to provide improved performance and reliability while increasing energy efficiency.

PA RT S A N D F E ATU R E S

KEY PARTS AND COMPONENTS

In addition to the special features and components outlined in the Special Features section, there are several other important components that are referenced in this manual.

ULTRA-CAPACITY STAINLESS STEEL DRUM

The ultra-large stainless steel drum offers extreme durability and is tilted to improve efficiency and allow easier access for large items.

WATER CIRCULATION AND STEAM NOZZLES

The water circulation nozzles spray the water/ detergent solution directly onto garments for super cleaning performance. During LG’s unique high-efficiency STEAM cycles, the steam nozzle injects fabrics with hot steam to gently remove tough stains.

LEVELING FEET

Four leveling feet (two in the front and two in the back) adjust to improve washer stability on uneven floors.

DRAIN ACCESS PANEL

Provides access to the drain line and drain pump filter.

Drain Hose

Hot and Cold Water Inlets

PLC MODEM ACCESS PANEL

This panel covers the PLC modem and should only be removed by a technician or

Rear of Washer

servicer, or when installing the optional Remote Laundry Monitor (purchased separately).

Included Accessories

Hot and Cold Water Hoses

Wrench

(for removing

shipping bolts and

adjusting leveling feet)

Tie Strap (for securing drain hose)

Caps (4) (for covering shipping bolt holes)

Elbow Bracket (for securing drain hose)

I N S TA L L AT I O N I N S T RU C T I O N S

293/4"

(75.6 cm)

(10 cm)

51"

(129.5 cm)

211/4"

(54 cm)

27"

(68.6 cm)1" (2.5 cm)

(2.5 cm)

EXTRA HOT/COLD

HOT/COLD

WARM/WARM

WARM/COLD

COLD/COLD

EXTRA HIGH

HIGH

MEDIUM

LOW

NO SPIN

HIGH

LOW

OFF

HEAVY

NORMAL

LIGHT

EXTRA RINSE

TUB CLEAN

RINSE +SPIN

DRUM LIGHT

PRE-WASH

CHILD LOCK

WATER PLUS

STAIN CYCLE

SPINSENSE™

DELAY WASH

STEAM

LOAD SENSING

WASHRINSESPIN

CHOOSE THE PROPER LOCATION

wWARNING

• Washer is heavy! Two or more people are required when moving and unpacking the washer. Failure to do so can result in back

or other injury.

• Store and install the washer where it will not

be exposed to temperatures below freezing or exposed to outdoor weather conditions.

Failure to follow this warning can cause serious injury, ﬁre, electrical shock, or death.

• Properly ground washer to conform with all

governing codes and ordinances. Failure to follow this warning can cause serious injury, ﬁre, electrical shock, or death.

• To reduce the risk of electric shock, do not

install the washer in humid spaces. Failure to follow this warning can cause serious injury, ﬁre, electrical shock, or death.

• The base opening must not be obstructed by

carpeting when the washer is installed on a carpeted ﬂoor.

• Do not remove ground prong. Do not use

an adapter or extension cord. Plug into a grounded 3-prong outlet. Failure to follow this

warning can cause serious injury, ﬁre, electrical shock, or death.

Power Outlet

• The power outlet must be within 60 in. (1.5 m) of either side of the washer.

• The appliance and outlet must be positioned so that the plug is easily accessible.

• Do not overload the outlet with more than one appliance.

• The outlet must be grounded in accordance with current wiring codes and regulations.

• Time-delay fuse or circuit breaker is recommended.

NOTE: It is the personal responsibility and obligation of the product owner to have a proper outlet installed by a qualified electrician.

CLEARANCES

To ensure sufficient clearance for water lines and airflow, allow minimum clearances of at least 1 in. (2.5 cm) at the sides and 4 in. (10 cm) behind the unit. Be sure to allow for wall, door, or floor moldings that may increase the required clearances.

Allow at least 24 in. (61.2 cm) in front of the washer to open the door.

I N S TA L L AT I O N I N S T RU C T I O N S

(75.6 cm)

(10 cm)

27"

(68.6 cm)1"(2.5 cm)

(2.5 cm)

771/2"

(190.5 cm)

FLOORING

• To minimize noise and vibration, the washer MUST be installed on a solidly constructed ﬂ oor. See the NOTE at right.

• Allowable slope under the entire washer is

1° maximum.

• Carpeting and soft tile surfaces are not recommended.

• Never install the washer on a platform or weakly supported structure. Use only an approved accessory pedestal as described below.

INSTALLATIONS WITH OPTIONAL PEDESTAL BASE OR STACKING KIT

IMPORTANT: If you are installing your washer using an optional pedestal base or stacking kit, please refer to the instructions for your pedestal or stacking kit before proceeding with the installation.

NOTE: Please note that the floor must be strong and rigid enough to support the weight of the washer when fully loaded, without flexing or bouncing. If your floor has too much flex in it, you may need to reinforce it to make it more rigid. A floor that is adequate for a top-loading washer may not be rigid enough for a frontloading washer, due to the difference in the spin speed and direction. If the floor is not solid, your washer may vibrate and you may hear and feel the vibration throughout your house.

Required Dimensions for Installation

With Pedestal

Required Dimensions for Installation

With Stacking Kit

I N S TA L L AT I O N I N S T RU C T I O N S

UNPACKING AND REMOVING SHIPPING BOLTS

When removing the washer from the carton base, be sure to remove the foam tub support in the middle of the carton base.

If you must lay the washer down to remove the base packaging materials, always lay it carefully on its side. Do NOT lay the washer on its front or back.

IMPORTANT: To prevent internal damage during transport, the washer is equipped with 4 shipping bolts and plastic retainers. These bolts and retainers MUST be removed before operating the washer.

• Failure to remove shipping bolts and retainers may cause severe vibration and noise, which can lead to permanent damage to the washer. The cord is secured to the back of the washer with a shipping bolt to help prevent operation with shipping bolts in place.

Foam Tub Support

Carton Base

Shipping Bolts

Starting with the bottom 2 shipping bolts, use the included wrench to remove the 4 shipping bolts by turning them counterclockwise.

Retainer

Hole Cap

Remove the retainers by turning them slightly while pulling. Rotate and press the hole caps into the shipping bolt holes.

NOTE: Save the bolts and retainers for future use. To prevent damage to internal components, the shipping bolts and retainers must be installed when transporting the washer.

I N S TA L L AT I O N I N S T RU C T I O N S

CONNECTING THE WATER LINES

• IMPORTANT: Use new hoses when installing the washer. Do NOT reuse old hoses.

• IMPORTANT: Use ONLY the inlet hoses provided by LG with this laundry product. Aftermarket hoses are not guaranteed to ﬁ t or function correctly. Other hoses may not tighten correctly and could cause leaks. Subsequent damage to product or property will not be covered under the terms of LG's warranty.

• Water supply pressure must be between 14.5 PSI and 116 PSI (100~800 kPa). If the water supply pressure is more than 116 PSI, a pressure reducing valve must be installed.

• Periodically check the hose for cracks, leaks, and wear, and replace the hose if necessary.

• Make sure that the water lines are not stretched, pinched, crushed, or kinked.

• The washer should never be installed or stored in a location subject to freezing temperatures. Damage to the water lines and internal mechanisms of the washer can result. If the washer was exposed to freezing temperatures prior to installation, allow it to stand at room temperature for several hours before use.

Water Hose (to water inlet on washer)

Rubber Seal

Insert a rubber seal into the threaded ﬁ ttings on each hose.

Rubber Seal

Water Hose (to tap)

Water Inlets

NOTE: Do not cross-thread the hose ﬁ ttings.

Attach the hot water line to the red hot water inlet on the back of the washer. Attach the cold water line to the blue cold water inlet on the back of the washer. Tighten the fittings securely.

Water Tap

Attach the hot water line to the hot water

tap. Attach the cold water line to the cold water tap.

Tighten the ﬁ ttings securely. Open the water taps fully to check for leaks.

I N S TA L L AT I O N I N S T RU C T I O N S

CONNECTING THE DRAIN LINE

• The drain hose should always be properly secured. Failure to properly secure the drain hose can result in ﬂooding and property damage.

• Do not install the end of the drain hose higher than 96 in. (244.8 cm) above the bottom of the washer.

• The drain must be installed in accordance with any applicable local codes and regulations.

• Make sure that the water lines are not stretched, pinched, crushed, or kinked.

Option 1: Standpipe

Elbow Bracket

Tie Strap

Stand Pipe

Drain Hose

Clip the end of the hose into the elbow bracket. Insert the end of the drain hose into a standpipe. Use tie strap to secure the drain hose in place.

NOTE: Total height of the hose end should not exceed 96 in. (244.8 cm) from the bottom of the washer.

Option 2: Laundry Tub

Elbow Bracket

Tie Strap

Drain Hose

Clip the end of the hose into the elbow bracket. Hang the end of the drain hose over the side of the laundry tub. Use tie strap to secure the drain hose in place.

NOTE: Total height of the hose end should not exceed 96 in. (244.8 cm) from the bottom of the washer.

Laundry Tub

Option 3: Floor Drain

Drain Hose

Floor Drain

Insert the end of the drain hose into the floor drain. Secure the hose in place to prevent it from moving.

I N S TA L L AT I O N I N S T RU C T I O N S

LEVELING THE WASHER

The drum of your new washer spins at very high speeds, up to 1,200 RPM. To minimize vibration, noise, and unwanted movement, the floor must be a perfectly level, solid surface.

NOTE: Adjust the leveling feet only as far as necessary to level the washer. Extending the leveling feet more than necessary can cause the washer to vibrate.

• All four leveling feet must rest solidly on the ﬂ oor. Rock the washer gently from corner to corner to make sure that the washer does not rock.

If you are installing the washer on the optional pedestal, you must use the leveling feet on the pedestal to level the washer. The washer’s leveling feet should be fully retracted and locked into position with the locknuts.

Level

Leveling Feet

Position the washer in the final location, taking special care to not pinch, strain, or crush the water and drain lines. Place a level across the top of the washer.

Leveling Feet

Raise

Loosen the locknuts on all 4 leveling feet

until you can turn the feet with the included wrench. Turn clockwise to raise the washer or counterclockwise to lower it.

Lower

Tighten all 4 locknuts securely

Once the washer is level from side to side

and front to back, tighten all locknuts securely.

Make sure that all 4 leveling feet are in firm contact with the floor.

NOTE: To make sure that the washer is properly level, run the washer with a test load: place approximately 6 pounds of laundry in the machine. Then, press POWER, press RINSE+SPIN, and then press the START/PAUSE button. See the following sections for additional information on cycle selection and operation.

Verify that the washer does not rock or vibrate excessively during the spin cycle. If the washer vibrates or shakes, adjust the leveling feet until the washer is stable and retest.

SORTING WASH LOADS

Bleach symbols

Any bleach

(when needed)

Only non-chlorine bleach

(when needed)

Do not bleach

Machine wash cycle

Normal

Permanent press/

wrinkle resistant

Gentle/

delicate

Hand wash

Do not wash Do not wring

Water temperature

Hot

(50°C/120°F)

Warm

(40°C/105°F)

Cold/cool

(30°C/85°F)

H O W TO U S E

Fabric Care Labels

Most articles of clothing feature fabric care labels that include instructions for proper care.

Fabric Care Labels

Loading the Washer

• Check all pockets to make sure that they are empty. Items such as clips, matches, pens, coins, and keys can damage both your washer and your clothes.

• Close zippers, hooks, and drawstrings to prevent these items from snagging or tangling on other clothes.

• Pretreat heavily stained areas for best results.

• Combine large and small items in a load. Load large items ﬁrst.

• Large items should not be more than half of the total washload.

• The washer can be fully loaded, but the drum should not be tightly packed with items. The door of the washer should close easily.

• To prevent an out-of-balance load, do not wash single items. Add one or two similar items to the load. Large, bulky items, such as a blanket, comforter, or bedspread should be washed individually.

• Do not wash or spin waterproof clothes.

• When unloading the washer, check under the door seal for small items.

Grouping Similar Items

For best results, sort clothes into loads that can be washed with the same wash cycle.

Different fabrics have different care requirements. Always wash dark colors separately from light

colors and whites to prevent discoloration. If possible, do not wash heavily soiled items with lightly soiled ones. The chart below shows recommended groupings.

Sort Laundry...

by Colors by Soil by Fabric by Lint

Whites Heavy Delicates Lint Producer Lights Normal Easy Care Lint Collector Darks Light Sturdy

NOTE: The front loading washer rotates the wet laundry to wash it with less water. If you do not see the water during washing, it is not a problem because the laundry is sufﬁciently wet.

H O W TO U S E

SELECTING DETERGENT

IMPORTANT: Your Steam Washer™ is designed for use with only High-Efficiency (HE) detergents. HE detergents are formulated specifically for front-load washers and contain suds-reducing agents. Always look for the HE symbol when purchasing detergent.

HE detergents produce fewer suds, dissolve more efficiently to improve washing and rinsing performance, and help to keep the interior of your washer clean.

Using a regular detergent may cause oversudsing and unsatisfactory performance.

ABOUT THE DISPENSER

The automatic dispenser consists of four compartments which hold:

• Liquid chlorine bleach.

• Liquid fabric softener.

• Liquid or powdered detergent for prewash.

• Liquid or powdered detergent and color-safe bleach for main wash.

All laundry products can be added at once in their respective dispenser compartments. They will be dispensed at the appropriate time for the most effective cleaning.

After adding the laundry products to the dispenser, close the dispenser drawer.

IMPORTANT: Do not place or store laundry products, such as detergent, bleach, or liquid fabric softener, on top of your washer or dryer. Wipe up any spills immediately. These products can damage the finish and controls.

Designed specially to use only HE (High-Efﬁ ciency) detergent

Liquid Chlorine Bleach Compartment

Liquid Fabric Softener Compartment

Insert

Liquid Detergent Cup

Prewash Detergent Compartment

To add detergent, bleach, and fabric softener to the automatic dispenser:

Open the dispenser drawer.

Load the laundry products into the

appropriate compartments.

Slowly close the dispenser drawer to

avoid early dispensing of the laundry products.

NOTE: It is normal for a small amount of water to remain in the dispenser compartments at the end of the cycle.

Main Wash Detergent Compartment

LOADING THE DISPENSER

H O W TO U S E

Prewash Detergent Compartment

Add liquid or powdered detergent to this compartment when using the Prewash option. Always use HE (High-Efficiency) detergent with your washing machine.

• The amount of detergent added for the Prewash option is 1/2 the amount recommended for the main wash cycle. For example, if the main wash cycle requires one cup of detergent, add 1/2 cup for the Prewash option.

NOTE: If liquid detergent is to be used for the main wash when using the pre-wash option, the liquid detergent cup accessory must be used in main wash dispenser to prevent the main wash liquid detergent from being dispensed immediately.

Main Wash Detergent Compartment

This compartment holds laundry detergent for the main wash cycle, which is added to the load at the beginning of the cycle. Always use HE (High-Efficiency) detergent with your washing machine.

Never exceed the manufacturer’s recommendations when adding detergent. Using too much detergent can result in detergent buildup in clothing and the washer. Either powdered or liquid detergent may be used.

• When using liquid detergent, make sure the liquid detergent cup and insert are in place. Do not exceed the maximum ﬁll line.

• When using powdered detergent, remove the insert and liquid detergent cup from the compartment. Powdered detergent will not dispense with the liquid detergent cup and insert in place.

NOTE: Liquid or powdered color-safe bleach may be added to the main wash compartment with detergent of the same type.

Liquid Bleach Compartment

This compartment holds liquid chlorine bleach, which will be dispensed automatically at the proper time during the wash cycle.

• Do not add powdered or liquid color-safe bleach to this compartment.

• Always follow the manufacturer’s recommendations when adding bleach. Do not exceed the maximum ﬁll line. Using too much bleach can damage fabrics.

• Never pour undiluted liquid chlorine bleach directly onto the load or into the drum. Fabric damage can occur.

Fabric Softener Compartment

This compartment holds liquid fabric softener, which will be automatically dispensed during the final rinse cycle.

• Always follow the manufacturer’s recommendations when adding fabric softener. Do not exceed the maximum ﬁll line. Using too much fabric softener may result in stained clothes.

• Dilute concentrated fabric softeners with warm water. Do not exceed the maximum ﬁll line.

• Never pour fabric softener directly onto the load or into the drum.

Designed specially to use only HE (High-Efﬁciency) detergent

WASH/RINSE SPIN SPEED SOIL LEVEL BEEPER

EXTRA HOT/COLD

HOT/COLD

WARM/WARM

WARM/COLD

COLD/COLD

EXTRA HIGH

HIGH

MEDIUM

LOW

NO SPIN

HIGH

LOW

OFF

HEAVY

NORMAL

LIGHT

EXTRA RINSE

TUB CLEAN

RINSE +SPIN

DRUM LIGHT

PRE-WASH

CHILD LOCK

WATER

PLUS

STAIN CYCLE

SPINSENSE™

OPTION

PRESS & HOLD 3SEC

FOR EXTRA FUNCTIONS

DELAY WASH

STEAM

LOAD

SENSING

WASH RINSE SPIN

H O W TO U S E

CONTROL PANEL FEATURES

POWER ON/OFF BUTTON

Press to turn the washer ON. Press again to turn the washer OFF.

NOTE: Pressing the ON/OFF button during a cycle will cancel that cycle and any load settings will be lost.

CYCLE SETTING BUTTONS

Use these buttons to select the desired cycle options for the selected cycle. Press the button for that setting until the indicator light for

the desired value is lit.

CYCLE SELECTOR KNOB

Turn this knob to select the desired cycle. Once the desired cycle has been selected, the standard presets will be shown in the display. These settings can be adjusted using the cycle setting buttons anytime before starting the cycle.

START/PAUSE BUTTON

Press this button to START the selected cycle. If the washer is running, use this button to PAUSE the cycle without losing the current settings.

NOTE: If you do not press the START/PAUSE button within 4 minutes of selecting a cycle, the washer automatically turns off.

STEAM BUTTON

Press the STEAM button to add steam to the selected cycle for added cleaning power.

NOTE: Steam can only be added to the following cycles: STEAMFRESH™, ALLERGIENE™, SANITARY, BULKY/LARGE, COTTON/NORMAL, and PERM. PRESS

DELAY BUTTON

Press this button to delay the start of the wash cycle. Each press of the button increases the delay time by one hour, up to 19 hours.

LED DISPLAY

The display shows the settings, estimated time remaining, options, and status messages for your Steam Washer™. The display will remain on through the cycle.

OPTION BUTTONS

The option buttons allow you to select additional cycle options and will light when selected. Certain buttons also allow you to activate special functions by pressing and holding the button for 3 seconds.

For detailed information about the individual options, please see the following pages.

H O W TO U S E

CYCLE GUIDE

The cycle guide below shows the options and recommended fabric types for each cycle.

NOTE: To protect your garments, not every wash/rinse temperature, spin speed, soil level, or option is available with every cycle.

H O W TO U S E

LOAD

SENSING

WASH RINSE SPIN

THE LED DISPLAY

The LED display shows the settings, estimated time remaining, options, and status messages for your washer. When the washer is turned on, the display will illuminate.

CYCLE COMPLETION INDICATOR

This portion of the display shows which stage of the wash cycle is currently underway (LOAD SENSING, WASH, RINSE or SPIN

ESTIMATED TIME REMAINING

When the START/PAUSE button is pressed, the washer automatically detects the wash load (weight) and optimizes the washing time, based on the selected cycle and options. The display will then indicate the estimated time remaining for the selected wash cycle.

NOTE: The cycle time displayed may appear much longer than that of a top-loading washer. The displayed time is for the complete cycle, rather than just the agitation portion of the cycle, as is typically shown on a top-loading washer.

DOOR LOCK INDICATOR

Indicates that the door is locked. The washer door will lock while the washer is operating. The door can be unlocked by pressing the START/ PAUSE button to stop the washer.

NOTE: If the temperature in the washer is too high, the door cannot be unlocked until the washer has cooled. If the water level is too high, select the DRAIN & SPIN cycle to drain excess water. Do not try to force open the door.

DELAY WASH INDICATOR

This indicator shows that the washer has been set for DELAY WASH. The washer will start automatically after the set delay time has passed.

OPERATING THE WASHER

EXTRA RINSE

TUB CLEAN

RINSE +SPIN

DRUM LIGHT

PRE-WASH

CHILD LOCK

WATER

PLUS

STAIN CYCLE

SPINSENSE™

OPTION

PRESS & HOLD 3SEC

FOR EXTRA FUNCTIONS

Once you have loaded the washer and added laundry products (detergent, bleach, and/or fabric softener):

H O W TO U S E

Press the ON/OFF button to turn on the

washer. The lights around the cycle selector knob will illuminate.

Turn the cycle selector knob to the desired

cycle. The display will show the preset Rinse/Wash Temperature, Spin Speed, Soil Level, and Option settings for that cycle.

If you would like to change the settings for that cycle, press the appropriate cycle settings button(s) until the indicator light for the desired setting is lit.

NOTE: To protect your garments, not every wash/rinse temperature, spin speed, soil level, or option is available with every cycle.

Press the START/PAUSE button to begin

the cycle. The door will latch, the display will change, and the washer will calculate the

estimated time remaining. Once the washer has calculated the estimated total cycle time, the washer will start. To pause the cycle at any time, press PAUSE.

NOTE: The cycle time displayed may appear much longer than that of a toploading washer. The displayed time is for the complete cycle, rather than just the agitation portion of the cycle, as is typically shown on a top-loading washer.

Washing time can be reduced significantly for small or lightly soiled loads by selecting the Speed Wash cycle and setting the Soil Level button to Light.

Select any additional cycle options, such as

STEAM or DELAY by pressing the button for that option.

NOTE: To protect your garments, not every wash/rinse temperature, spin speed, soil level, or option is available with every cycle.

When the load is finished, the beeper (if set) will sound and the door will unlock.

Remove damp clothes from the washer immediately. Check under the door seal for small items.

H O W TO U S E

STEAM CYCLES

STEAM cycles include the SteamFresh™, Allergiene™, Sanitary, Bulky/Large, Cotton/Normal, and

Perm. Press cycles. Adding the Steam option to these cycles provides superior cleaning performance while reducing energy and water consumption. By using a hot steam spray from above and cooler water below, fabrics get the cleaning benefits of a super hot wash, without the energy usage or potential damage to fabrics.

To Add STEAM to a Standard Cycle:

Turn on the washer and turn the cycle selector knob to select a cycle with the STEAM option.

Press the STEAM button. The washer will

automatically adjust the cycle settings.

Set any other desired options. Press the START/PAUSE button to start the

cycle. The washer will start automatically.

CAUTION: Do not touch the door during steam cycles. The door surface can become very hot. Allow the door lock to release before opening the door.

Do not attempt to override the door lock mechanism or reach into the washer during a steam cycle. Steam can cause severe burns.

IMPORTANT NOTES ABOUT STEAM CYCLES:

• Steam may not be clearly visible during the

steam cycles. This is normal. Too much steam could damage clothing.

• Do not use steam with delicate fabrics such as

wool, silk, or easily discolored fabrics.

• Do not touch the door.

Using the SteamFresh™ Cycle

SteamFresh uses the power of steam alone to quickly reduce wrinkles and odor in fabrics. It brings new life to wrinkled clothes that have been stored for an extended time and makes heavily wrinkled clothes easier to iron. SteamFresh can also be used to help reduce odors in fabrics.

To Use the SteamFresh Cycle:

Turn on the washer and turn the cycle selector knob to select the SteamFresh cycle.

Load up to 5 items and close the door. NOTE: If there is any moisture inside the

drum, such as from a previous wash cycle, wipe the drum dry with a towel before adding clothes.

Press the STEAM button until the correct number of items is shown in the display. No other options need to be set.

Press the START/PAUSE button to start the cycle.

After the SteamFresh cycle is complete, the washer will tumble the clothes for up to 30 minutes to prevent rewrinkling.

After removing clothes from the SteamFresh cycle, they may feel slightly damp. Place clothes on a hanger for at least 10 minutes to allow them to dry.

• The SteamFresh cycle is not recommended for use with 100% cotton clothing.

• Remove stains from clothing before using the SteamFresh cycle; the high heat could cause stains to set permanently.

• Do not use SteamFresh with the following items: wool, blankets, leather jackets, silk, wet clothes, lingerie, foam products, or electric blankets.

• Best results are achieved when articles are of similar size and fabric type. Do not overload.

CYCLE SETTING BUTTONS

H O W TO U S E

Each cycle has preset settings that are selected automatically. You may also customize the settings using the cycle setting buttons. Press the button for that setting until the indicator light forthe desired value is lit.

The washer automatically adjusts the water level for the type and size of wash load for best results and maximum efficiency. It may seem there is no water inside the drum in some cycles, but this is normal.

NOTE: To protect your garments, not every wash/ rinse temperature, spin speed, soil level, or option is available with every cycle. See the Cycle Guide for details.

WASH/RINSE

Selects the wash and rinse temperature combination for the selected cycle. Press the WASH/RINSE button until the indicator light for the

desired setting is lit.

• Your washer features a heating element to boost the hot water temperature for Extra Hot settings. This provides improved wash performance at normal water heater settings.

• Select the water temperature suitable for the

type of load you are washing. Follow the fabric care label for best results.

• Warm rinses leave the loads drier than cold

rinses. Warm rinses can increase wrinkling.

• In cold climates, a warm rinse makes the load

more comfortable to handle.

• Cold rinses use less energy.

SPIN SPEED

The washer drum spins at up to 1,200 RPM. This reduces drying time and saves energy. Press the SPIN SPEED

button until the indicator light for the desired setting is lit. Some fabrics, such as delicates, require a slower spin speed.

The Drain & Spin cycle:

The Spin Speed button also activates the Drain & Spin cycle to drain the tub and spin clothes; for example, if you want to remove clothes before the cycle has ended.

To activate the DRAIN & SPIN cycle:

Press the ON/OFF button to turn on

the washer. Press the SPIN SPEED button.

Select the desired spin speed.

NOTE: If NO SPIN is selected, the washer will drain only.

Press the START/PAUSE button.

SOIL LEVEL

Adjusts the selected cycle to allow more time for heavily soiled clothes or less time for lightly soiled clothes.

Press the SOIL LEVEL button until the indicator light for the desired setting is lit.

BEEPER

Adjusts the volume of the end-of-cycle beeper, or turns it off.

H O W TO U S E

STAIN CYCLE

SPINSENSE™

WATER

PLUS

CYCLE OPTION BUTTONS

Your Steam Washer™ features several additional cycle options to customize cycles to meet your individual needs. Certain option buttons also feature a special function (see the following page for details) that can be activated by pressing and holding that option button for 3 seconds.

To Add Cycle Options to a Cycle:

Turn on the washer and turn the cycle

selector knob to select the desired cycle. Use the cycle setting buttons to adjust the

settings for that cycle. Press the cycle option button(s) for the

option you would like to add. The cycle option buttons, except STEAM and DELAY, will light when selected.

Press the START/PAUSE button to start the

cycle. The washer will start automatically.

NOTE: To protect your garments, not every wash/ rinse temperature, spin speed, soil level, or option is available with every cycle. See the Cycle Guide for details.

STEAM

Use the STEAM button to add steam to the cycle for extra cleaning power and improved efficiency. See Steam Cycles section for additional details.

NOTE: Not all cycles can be used with the STEAM option.

RINSE+SPIN

Select this option to rinse and spin a

load separately from a regular cycle.

This can be helpful in preventing fresh

stains from setting in fabrics.

To activate the Rinse+Spin cycle:

Press the ON/OFF button to turn on the washer.

Press the RINSE+SPIN button.

Press the START/PAUSE button.

EXTRA RINSE

This option will add an extra rinse

cycle to the selected cycle. Use this

option to help ensure the removal

of detergent or bleach residue from

fabrics.

STAIN CYCLE

Select this option for heavily stained

clothes, such as play clothes or work

clothes. Stain Cycle will add extra

wash time to the selected cycle, as

well as an additional rinse cycle.

WATER PLUS

Select this option to add extra water to

the wash and rinse cycles for superior

results, especially with large or bulky

items.

DELAY

PREWASH

Once you have selected the cycle and other settings, press this button to delay the start of the wash cycle. Each press of the button increases the delay time by one hour, up to 19 hours.

Select this option to add a 16-minute prewash and spin cycle to the chosen cycle. This is especially useful for heavily soiled items.

SPECIAL FUNCTIONS

The option buttons also activate special functions, including CHILD LOCK, DRUM LIGHT, TUB CLEAN, and SPIN SENSE™. Press and hold the option button marked with the special function for 3 seconds to activate.

CHILD LOCK

Use this option to prevent unwanted use of the washer or to keep cycle settings from being changed while the washer is

operating. Press and hold the PREWASH button for 3 seconds to activate or deactivate CHILD LOCK.

The lock icon will be shown in the display, and all controls are disabled. The washer can be locked during a cycle. Once CHILD LOCK is selected, the display will alternate between CL and the remaining.

SPECIAL FUNCTIONS

STAIN CYCLE

SPINSENSE™

H O W TO U S E

DRUM LIGHT

The drum is equipped with a blue LED light that illuminates when the washer is turned on. This light automatically

turns off when the door is closed and the cycle starts. To turn on the light during a cycle, press and hold the RINSE+SPIN button for 3 seconds. The drum light will illuminate and then turn off automatically after 4 minutes.

TUB CLEAN

A buildup of detergent residue can occur in the wash tub over time and can lead to a mildewy or musty smell.

The TUB CLEAN cycle is specially designed to remove this buildup. Fill the bleach dispenser to the MAX. line. Press and hold the EXTRA RINSE button for 3 seconds to activate this cycle. After the cycle has ended, open the door and allow the drum interior to dry completely.

NOTE: Do NOT use this cycle with clothes, and do NOT add detergent or fabric softener.

NOTE: If you use the TUB CLEAN cycle on a monthly basis, the wash drum will be kept clean.

SPINSENSE™

SPINSENSE can be used to help

reduce or eliminate vibrations,

especially on wood floor installations.

To activate SPINSENSE™:

While the washing machine is running in any cycle, press and hold the STAIN CYCLE button for 3 seconds.

The SPIN SPEED light will blink while the washer is running to show that SPINSENSE is active. The SPINSENSE function will remain active for every cycle, even after a power failure.

To cancel SPINSENSE™:

Press and hold the STAIN CYCLE button for 3 seconds to turn off the SPINSENSE function.

ALLERGIENE™

The ALLERGIENE™ cycle is a powerful, high temperature cycle designed specifically to reduce certain allergens.

• Selecting the ALLERGIENE™ cycle automatically incorporates steam into the wash cycle.

• The ALLERGIENE™ cycle can significantly reduce allergens in bedding and clothing.

• The ALLERGIENE™ cycle helps reduce dust mite populations and helps reduce allergens.

• Due to the higher energy and temperatures used, the ALLERGIENE™ cycle is not recommended for wool, silk, leather, or any other delicate or temperature sensitive items.

HAND WASH/WOOL

• Only woolen items that are designated as

“Machine-Washable” should be washed in this washing machine

• Wash only small loads for optimum fabric care

(less than 8 lbs.)

• Only neutral (wool safe) detergents should

be used (Only a small quantity of detergent is needed due to the small load size and low volume of water in the cycle.)

• The HANDWASH/WOOL cycle uses a gentle

tumble action and low speed spin for ultimate fabric care

The wool wash cycle of this machine has been approved by Woolmark for the washing of machine washable Woolmark products provided that the products are washed according to the instructions on the garment label and those issued by the manufacturer of this washing machine, M0807.

Certiﬁed by NSF Certiﬁcado por NSF

NSF International (formerly the National Sanitation Foundation), certifies that SANITARY cycle reduces 99.9% of bacteria on laundry, and none of bacteria will carry over onto the next laundry load.

C A R E A N D C L E A N I N G

REGULAR CLEANING

wWARNING:

• Unplug the washer before cleaning to avoid the risk of electric shock. Failure to follow this warning

can cause serious injury, fire, electrical shock, or death.

• Never use harsh chemicals, abrasive cleaners, or solvents to clean the washer.

They will damage the finish.

Cleaning the Exterior

Proper care of your washer can extend its life. The outside of the machine can be cleaned with warm water and a mild, nonabrasive household detergent.

Immediately wipe off any spills with a soft, damp cloth. IMPORTANT: Do not use methylated spirits,

solvents, or similar products. Never use steel wool or abrasive cleansers; they

can damage the surface.

Care and Cleaning of the Interior

Use a towel or soft cloth to wipe around the washer door opening, door seal, and door glass. These areas should be kept clean to ensure a watertight seal. Be sure to wipe under the inside rubber seal to remove any moisture or soil.

Always remove items from the washer as soon as the cycle is completed. Leaving damp items in the washer can cause wrinkling, color transfer, and odor.

Run the TUB CLEAN cycle regularly to remove detergent buildup and other residue.

NOTE: If you use the TUB CLEAN cycle on a monthly basis, the wash drum will be kept clean.

Cleaning the Steam and Water Circulation Nozzles

Use a cotton swab to remove lime or detergent buildup from the inside of the steam and water circulation nozzles. NEVER use a sharp or pointed object; you could damage the nozzles.

Removing the Stain in Door Seal

NOTE: Wear rubber gloves and eye protection while performing the following procedure:

Dilute 3/4 cup (177 ml) liquid chlorine bleach with 1

gallon (3.8 L) of warm/hot water. Use this solution to wipe down all surfaces of the

gasket to remove the deposits that are causing any odor. (Be sure to fold back the lip of the gasket to get under the edge where residue can build up.)

Wipe the gasket with a dry cloth. Leave the door open to allow the gasket to dry completely.

Do not use undiluted bleach as this will damage the gasket. Follow the manufacturer’s instructions for proper use of bleach. If the gasket cannot be cleaned properly, it should be replaced.

Storing the Washer

If the washer will not be used for an extended period of time and is in an area that could be exposed to freezing temperatures:

Turn off water supply tap.

Disconnect hoses from water supply and

drain water from hoses. Plug the power cord into a properly grounded

electrical outlet. Add 1 gallon of nontoxic recreational vehicle

(RV) antifreeze to the empty wash drum. Close door.

Select the spin cycle and let washer spin

for 1 minute to drain out all the water. NOTE: Not all of the RV antifreeze will be

expelled. Unplug the power cord, dry the drum interior

with a soft cloth, and close the door. Remove the inserts from the dispenser. Drain

any water in compartments and dry the compartments.

Store the washer in an upright position.

To remove the antifreeze from the washer

after storage, run washer through a complete cycle using detergent. Do not add laundry!

Removing Lime Buildup

If you live in an area with hard water, lime scale can form on internal components of the washer. Use of a water softener is recommended in areas with hard water. If a descaler is used, make sure that it is suitable for use in a washer, and run the TUB CLEAN cycle before washing clothing.

Lime scale and other spots may be removed from the stainless steel drum using a stainless steel cleaner. Do NOT use steel wool or abrasive cleansers; they can damage the surface.

CLEANING THE WASHER

Cleaning the Dispenser

C A R E A N D C L E A N I N G

The dispenser should be cleaned periodically to remove buildup from detergent and other laundry products.

Pull out the dispenser drawer until it stops. Press the button in the center of the drawer and pull to remove the drawer.

NOTE: If you clean the detergent dispenser once a week, it will always dispense properly.

Remove the inserts from the drawer, and

clean them with warm water and a soft cloth or brush to remove any residue or buildup.

Wipe out the inside of the drawer opening with a damp cloth. Reassemble the drawer and reinstall in the drawer opening.

NOTE: Do not use anything other than water to clean the drawer, inserts, and drawer opening. If any sort of household cleaner drains into the interior of the washer, run a RINSE+SPIN cycle before washing clothes.

C A R E A N D C L E A N I N G

MAINTENANCE

Cleaning the Water Inlet Filters

If the washer detects that water is not entering the dispenser, an error message will show on the display. If you live in an area with hard water, this may be caused by clogged inlet filters.

IMPORTANT: Use extreme care when removing and cleaning the filters. If the filters cannot be cleaned or are damaged, do NOT operate the washer without the inlet filters. Contact LG Customer Service or a qualified LG servicer.

IMPORTANTE: Use ONLY the inlet hoses provided by LG with this laundry product. Aftermarket hoses are not guaranteed to fit or function correctly. Other hoses may not tighten correctly and could cause leaks. Subsequent damage to product or property will not be covered under the terms of LG's warranty.

Inlet Filter

Turn off both water taps completely. Unscrew the hot and cold water lines from the back of the washer.

Carefully remove the filters from the water

inlets, and soak them in white vinegar or a lime scale remover, following the manufacturer’s instructions. Rinse thoroughly before reinstalling.

Press the filters back into place and reattach the water lines. Do NOT operate the washer without the inlet filters.

MAINTENANCE (cont.)

Cleaning the Drain Pump Filter

Lint and other objects may accumulate and clog the drain pump filter. If the washer fails to drain properly, unplug the washer and allow the water to cool, if necessary, before proceeding.

C A R E A N D C L E A N I N G

Open the drain pump filter access panel.

Plug

Pump Filter

Drain Hose

Unclip the drain hose and pull it out. Place

the end of the drain hose in a pan, bucket, or floor drain to catch water.

Remove the plug from the drain hose, and allow the water to drain completely.

Twist the pump filter counterclockwise to remove. Remove any lint and foreign objects from the pump filter.

Reverse the above steps to reinstall the drain pump filter and drain hose. Be sure to close the cover panel when finished.

T RO U B L E S H O OT I N G

NORMAL SOUNDS YOU MAY HEAR

The following sounds may be heard while the washer is operating. They are normal.

Clicking: Door lock relay when the door locks and unlocks.

Spraying or hissing: Steam or water spraying or circulating during the cycle.

Humming or gurgling:

Drain pump pumping water from the washer at the end of a cycle.

Splashing:

Clothes tumbling in the drum during the wash and rinse cycles.

BEFORE CALLING FOR SERVICE

Your Steam Washer™ is equipped with an automatic error-monitoring system to detect and diagnose problems at an early stage. If your washer does not function properly or does not function at all, check the following before you call for service.

Problem Possible Causes Solutions

Rattling and clanking noise

Thumping sound

Vibrating noise

• Foreign objects, such as keys, coins, or safety pins, may be in drum or pump.

• Heavy wash loads may produce a thumping sound.

• Washer load may be out of balance.

• Shipping bolts and/or packaging materials not removed.

• Wash load may be unevenly distributed in the drum.

• Not all leveling feet are resting ﬁ rmly on the ﬂ oor.

• Floor not rigid enough.

• Stop washer and check drum and drain ﬁ lter for foreign objects. If noise continues after washer is restarted, call for service.

• This is normal. If sound continues, washer is

probably out of balance. Stop and redistribute wash load.

• Stop and redistribute wash load.

• See Installation Instructions for removing shipping bolts and packaging.

• Stop washer and rearrange wash load.

• Adjust the leveling feet. Make sure all four feet are in ﬁ rm contact with the ﬂ oor while the washer is in the spin cycle with a load.

• Make sure that the ﬂ oor is solid and does not ﬂ ex. Refer to “Flooring” in the Installation section.

Water leaking around washer

Excessive sudsing

Staining

• Fill hose connection is loose at tap or washer.

• House drain pipes are clogged.

• Too much detergent or incorrect detergent.

• Laundry products added directly to the washer drum.

• Washer not unloaded promptly.

• Clothes not sorted properly.

• Check hoses. Check and tighten hose connections.

• Unclog drain pipe. Contact a plumber if necessary.

• Reduce detergent amount or use low-sudsing detergent.

Only use detergent with the HE

(High-Efﬁ ciency) logo.

• Load the laundry products into the dispenser.

• Always remove items from the washer as soon as the cycle is completed.

• Always wash dark colors separately from light colors and whites to prevent discoloration. If possible, do not wash heavily soiled items with lightly soiled ones.

+ 74 hidden pages