LG WD-11270BD, WM2677HM, WM2177H, WM2077CW, WM2277H Service Manual

100
WASHING MACHINE
SERVICE MANUAL
READ THIS MANUAL CAREFULLY TO DIAGNOSE PROBLEMS CORRECTLY BEFORE SERVICING THE UNIT.
MODEL: WM2277H*/WM2077CW
WM2177H*/WM2677H*M WD-11270BD
CAUTION
Website: http: //www.LGEservice.com E-mail: http: //www.LGEservice.com/techsup.html
!
101
APR. 2004 PRINTED IN KOREA
P/No.:3828ER3018Y
2
CONTENTS
1. SPECIFICATIONS .........................................................................................................................3
2. FEATURES & TECHNICAL EXPLANATION ................................................................................ 4
3. PARTS IDENTIFICATION ............................................................................................................ 7
4. INSTALLATION & TEST ............................................................................................................... 8
5. OPERATION ................................................................................................................................11
6. WIRING DIAGRAM/PROGRAM CHART.....................................................................................14
7. TROUBLESHOOTING.................................................................................................................17
7-1. BEFORE PERFORMING SERVICE ...................................................................................17
7-2. QC TEST MODE.................................................................................................................17
7-3. HOW TO CHECK THE WATER LEVEL FREQUENCY ......................................................17
7-4. ERROR DISPLAY ...............................................................................................................18
8. ERROR DIAGNOSIS AND CHECK LIST ....................................................................................20
8-1. DIAGNOSIS AND SOLUTION FOR ABNORMAL OPERATION ........................................20
8-2. FAULT DIAGNOSIS AND TROUBLESHOOTING ..............................................................23
9. DISASSEMBLY INSTRUCTIONS ...............................................................................................32
10. EXPLODED VIEW .....................................................................................................................41
10-1. CABINET & CONTROL PANEL ASSEMBLY ....................................................................41
10-2. DRUM & TUB ASSEMBLY................................................................................................42
10-3. DISPENSER ASSEMBLY .................................................................................................43
3
1. SPECIFICATIONS
ITEM WM2677H*M
WM2277H*/WD-11270BD
WM2177H* WM2077CW
COLOR W: BLUE WHITE, B: BLACK PEARL, S: TITANIUM
POWER SUPPLY AC 120 V, 60 Hz
PRODUCT WEIGHT 190 lbs. (86 kg)
WASHING 280 W
DRAIN MOTOR 80 W
WASH HEATER 1000 W
WASH 42 rpm
SPIN
0-1320 rpm 0-1100 rpm 0-1000 rpm
CYCLES 9 7
WASH/RINSE TEMPERATURES 5
SPIN SPEEDS 5
OPTIONS Prewash, Stain Cycle, Quick Cycle, Extra Rinse, Rinse+Spin, Delay Wash
CUSTOM PROGRAM Incorporated
WATER CIRCULATION Incorporated
OPERATIONAL WATER PRESSURE 4.5-145 psi (30-1000 kPa)
CONTROL TYPE Electronic
WASH CAPACITY [cu. ft.] 3.32 (3.83 IEC) 3.22 (3.72 IEC)
DIMENSIONS 27” (W) X 293/4” (D) X 3811/16” (H), 5013/16” (D, door open)
DELAY WASH up to 19 hours up to 12 hours up to 9 hours
DOOR SWITCH TYPE PTC + Solenoid
WATER LEVEL 10 steps (by sensor)
LAUNDRY LOAD SENSING Incorporated
ERROR DIAGNOSIS Incorporated
AUTO POWER OFF Incorporated
CHILD LOCK Incorporated
RLM ENABLE Incorporated
ELECTRIC POWER
CONSUMTION
REVOLUTION SPEED
4
2. FEATURES & TECHNICAL EXPLANATION
2-1. FEATURES
Direct Drive System
The advanced Brushless DC motor directly drives the drum without belt and pulley.
Tilted Drum and Extra Large Door Opening
Tilted drum and extra large door opening make it possible to load and unload easily.
Water Circulation
Spray detergent solution and water onto the load repeatedly. Clothes are soaked more quickly and thoroughly during the wash cycle. Detergent suds are eliminated more easily by the water shower during rinse cycle. The water circulation system uses both water and detergent more efficiently.
RollerJets
Washing ball enhances wash performance and reduces damage to clothing.
The jets spray and help tumble clothes to enhance
washing performance while maintaining fabric care.
Automatic Wash Load Detection
Automatically detects the load and optimizes the washing time.
Built-in Heater
Internal heater automatically heats the water to the optimum temperature on selected cycles.
Child Lock
The Child lock feature prevents children from pressing any buttons to change the settings during operation.
Using the RLM (Remote Laundry Monitor)
The RLM monitors status of your washer and/or dryer. You can plug the display unit into any power outlet in your home. The RLM Display Unit can be purchased separately for this washer.
추가선택, 예약,
5
2-2. NEURO FUZZY WASHING TIME OPTIMIZATION
To get the best washing performance, optimal time is determined by the water temperature,
the selected washing temperature, and the size of the load.
2-3. WATER LEVEL CONTROL
This model incorporates a pressure sensor which can sense the water level in the tub.
The water supply is stopped when the water level reaches the preset level, the washing
program then proceeds.
Spinning does not proceed until the water in the tub drains to a certain level.
2-4. DOOR CONTROL
The door can be opened by pulling the door handle whenever washer is not in operation.
When the cycle is completed, the DOOR LOCKED light will turn off.
If a power failure has occurred while in operation, the door will unlock after 5 minutes.
Clicking sounds can be heard when the door is locked/unlocked.
NEURO-
FUZZY
load size
selected washing
temperature
water
temperature
washing time
rinsing time
spin rhythm, time
the best washing performance
SENSING
PROCESSING
DETERMINATION
EFFECT
란제리
6
2-5. THE DOOR CAN NOT BE OPENED
While program is operating
When a power failed and power plug is taken out in operation
While Door Lock lights turn on.
White the motor is in the process of intertial rotating, through the operation is paused.
2-6. DOOR LOCKED LAMP LIGHTS
When the frequency of water level is lower than 22.9 kHz
(It can be canceled when the frequency is more than 23.8 kHz)
When the temperature inside the tub is higher than 45 °C and water level is not 25.5 kHz
(It can be canceled when the water level is 25.5 kHz or the temperature inside the tub is lower than 40 °C)
2-7. CHILD LOCK
Use this option to prevent unwanted use of the washer. Press and hold PRE WASH button for 3 seconds to
lock/unlock control.
When Child lock is set, CHILD LOCK lights and all buttons are disabled except the Power button. You can
lock the washer while it is operating.
2-8. WATER CIRCULATION
When Washing and Rinsing function of shower at the upper part of Gasket.
When Washing, it continuously operates for 3 minutes and intermittently.
When Rinsing, it continuously operates after completion of water supply at first rinse.
7
3. PARTS IDENTIFICATION
ACCESSORIES
란제리
Water Circulation Nozzle
A
Safety Cover (PLC Moderm)
8
Before servicing, ask the customer what the trouble is.
Check the setup (power supply is 120 V AC, remove the transit bolts....).
Check with the troubleshooting guide. Plan your service method by referring to the disassembly instructions. Service the unit. After servicing, operate the appliance to see whether it functions correctly.
STANDARD INSTALLATION
The appliance should be installed as follows:
REMOVE THE SHIPPING INSTALL THE APPLIANCE ADJUST THE
BOLTS
ON A FLAT AND FIRM SURFACE
LEVELING
Remove the 4 shipping bolts Turn the leveling feet to adjust
with the supplied wrench. the appliance.
Do first lower side to remove easily.
Keep the shipping bolts and
spanner for future use.
Insert the 4 caps
(provided) into the hole.
Turn clockwise to raise;
counterclockwise to lower.
4. INSTALLATION & TEST
9
HOW TO CONNECT THE INLET HOSE
Verify that the rubber washer is inside of the
valve connector.
Tighten the inlet hose securely to prevent leaks.
CONNECT THE DRAIN HOSE
CONNECT POWER PLUG
The end of the drain hose should be placed less than 96”from the floor.
Connect the power plug to the wall outlet.
Avoid connecting several electric devices, as doing so may cause a fire.
Make sure that the hose is not twisted.
Avoid submerging the end of the hose.
10
SOFTENER
MAX
TEST OPERATION
Connect the power plug to the outlet. Connect the inlet hoses.
Power off and the power on. Press the SPIN SPEED button. Press the START/PAUSE button. Check the spin and drain functions.
Listen for a click to determine if the door is unlocking.
Listen for a click to determine if the door has locked.
If SVC is needed during check, remove the remaining water by pulling out the hose cap.
Preparation for Press the POWER button. Press
the
Start/Pause
washing. button.
Press the WASH/RINSE button Check if the drum rotates Check if water is supplied
and the present temperature will
clockwise and counterclockwise.
through the detergent dispenser.
be displayed.
Check the water heating Check the automatic Check the water supply. function. reverse rotation.
Check the drain and spin
Press the
Water removal
functions.
START/PAUSE button.
11
5. OPERATION
WM2277H*/WM2177H*
WM2077CW
WM2677H*M
12
• Use this button to turn the power
On/Off.
• Rotate the Cycle selector knob to select the cycle designed for different types of fabric and soil levels.
Allows you to store a customized wash cycle for future use.
• To create a Custom Program:
1) Select a cycle.
2) Select the other desired Wash/Rinse Temp., Spin Speed, Soil Level.
3) Select the desired Options.
4) Press and hold the Custom Program button for 3 seconds (2 beep sounds). The Custom Program is now stored for future use.
• To reuse the program, select Custom Program and press Start/Pause .
• Use this option to preven Press and hold PRE WA lock/unlock control.
• When Child lock is set, C buttons are disabled exc can lock the washer whil
• Use this button to Start/ Stop the washer.
• S l
• T b o
• T b
• P
• This display shows:
a) the estimated time remaining in the
cycle when operating.
b) an error code when an error has been
detected.
13
ept the Power button. You e it is operating.
Prewash: Use this option for loads that need pretreatment. It
adds 16 minutes prewash and drain.
Rinse+Spin: Use this option to rinse and then spin.
Extra Rinse: This option provides an additional rinse cycle.
Stain Cycle: Adds time to the wash and rinse cycles for better
stain removal. Automatically provides a rinse.
Quick Cycle: The Quick cycle offers a quick cycle time.
• Lights whenever the door of the washer is locked.
• The door can be unlocked by pressing the Start/Pause button to stop the washer.
• Allows the start of any cycle to be delayed for 1~12 hours.
oad you are washing.
• These lights show which portion of the cycle the washer is operating.
14
6. WIRING DIAGRAM/PROGRAM CHART
BN
BK WH
GN
/
YL
GN
/
YL
RD
GN
BL
WH
NOISE FILTER
POWER CORD
123 123
123 123
BN
BK WH
GN
/
YL
GN
/
YL
GN
BL
WH
NOISE FILTER
POWER CORD
123 123
123 123
RD
WM2277H*
WM2077CW
Loading...
+ 35 hidden pages