Congratulations for choosing the advanced and compact
VX4500 cellular phone, designed to operate with the latest
digital mobile communication technology, Code Division
Multiple Access (CDMA). Along with the many advanced
features of the CDMA system, such as greatly enhanced voice
clarity, this phone offers:
●Large, easy-to-read, 8-line backlight LCD with status icons.
●Paging, messaging, voice mail, and caller ID.
●18-key keypad.
●Voice Commands.
●Menu, List and Keypad Readout.
●Announce Mode/Driving Mode.
●Long battery standby and talk time.
●Menu-driven interface with prompts for easy operation and
configuration.
●Any key answer, auto answer, auto retry, one-touch and
speed dialing with 99 memory locations.
●Bilingual (English and Spanish) capabilities.
Check Accessories
Your mobile phone comes with a rechargeable battery and a
one-slot desktop charger. Please verify that these accessories
are included.
Important Information
This user’s guide provides important information on the use
and operation of your phone. Please read all the information
carefully prior to using the phone for the best performance and
to prevent any damage to or misuse of the phone. Any
unapproved changes or modifications will void your warranty.
6
VX4500
VX4500
7
Page 5
FCC Part 15 Class B Compliance
This device and its accessories comply with part 15 of FCC
rules. Operation is subject to the following two conditions: (1)
This device and its accessories may not cause harmful
interference, and (2) this device and its accessories must accept
any interference received, including interference that causes
undesired operation.
Technical Details
The VX4500 is a dual-band phone that operates on both Code
Division Multiple Access (CDMA) frequencies: cellular services
at 800 MHz and Personal Communication Services (PCS) at 1.9
Ghz.
CDMA technology uses a feature called DSSS (Direct Sequence
Spread Spectrum) that enables the phone to keep
communication from being crossed and to use one frequency
channel by multiple users in the same specific area. This results
in a 10-fold capacity increase when compared with analog
mode. In addition, features such as soft / softer handoff, hard
Handoff, and dynamic RF power control technologies combine
to reduce call interruptions.
The Cellular and PCS CDMA networks consist of MSO (Mobile
Switching Office), BSC (Base Station Controller), BTS (Base
station Transmission System), and MS (Mobile Station). The
following table lists some major CDMA standards.
14.4kbps radio link protocol and
inter-band operations
IS-95 adapted for PCS frequency
band cdma2000 1xRTT AirInterface
Advanced Mobile Phone Service
MAS-BS
PCSC-RS
Intersystem operations
Nom-signaling data comm.
Speech CODEC
Async Data and Fax
Short message service
Packet Data
Position Determination
Service (gpsOne)
High Speed Packet Data
Cellular base station
Cellular mobile station
PCS personal station
PCS base station
Speech CODEC
* TSB -74: Protocol between an IS-95A system and ANSI J-STD-008
1xRTT system receives twice as many subscribers in the wireless
section as IS-95. Its battery life is twice as long as IS-95. High-speed
data transmission is also possible.
8
VX4500
VX4500
9
Page 6
FCC RF Exposure Information
WARNING! Read this information before operating the phone.
In August 1996, the Federal Communications Commission
(FCC) of the United States, with its action in Report and Order
FCC 96-326, adopted an updated safety standard for human
exposure to radio frequency (RF) electromagnetic energy
emitted by FCC regulated transmitters. Those guidelines are
consistent with the safety standard previously set by both U.S.
and international standards bodies.
The design of this phone complies with the FCC guidelines and
these international standards.
Bodily Contact During Operation
This device was tested for typical use with the back of the
phone kept 3/4 inches (2 cm) from the body. To comply with
FCC RF exposure requirements, a minimum separation distance
of 3/4 inches (2 cm) must be maintained between the user’s
body and the back of the phone, including the antenna, whether
extended or retracted. Third-party belt-clips, holsters, and
similar accessories containing metallic components should not
be used. Avoid the use of accessories that cannot maintain 3/4
inches (2 cm) distance between the user’s body and the back of
the phone and have not been tested for compliance with FCC
RF exposure limits.
Vehicle-Mounted External Antenna
(Optional, if available.)
A minimum distance of 8 inches (20 cm) must be maintained
between the user / bystander and the vehicle-mounted external
antenna to satisfy FCC RF exposure requirements. For more
information about RF exposure, visit the FCC website at
www.fcc.gov.
Caution
Use only the supplied and approved antenna. Use of
unauthorized antennas or modifications could impair call
quality, damage the phone, void your warranty and/or result in
violation of FCC regulations.
Do not use the phone with a damaged antenna. If a damaged
antenna comes into contact with the skin a minor burn may
result. Contact your local dealer for a replacement of antenna.
10
VX4500
VX4500
11
Page 7
Phone Over
Phone Over
1. Earpiece
2. Flip
3. LCD Screen
4. Headset Jack
5. Left Soft Key
6. Side Key
7. SEND Key
8. Voice Command
Key
9. Manner Mode
Key
view
view
10. Speaker Key
11. Right Soft Key
12. Navigation Key
13. Message Key
14. Clear Key
15. END/POWER Key
16.Alphanumeric
Keypad
17. Lock Mode Key
18. Microphone
1.Earpiece
2.Flip Flip open the case to answer an incoming call and
close to end the call.
3.LCD Screen Displays messages and indicator icons.
4.Headset Jack
5.Left Soft Key Use to display the function setting menu.
6.Side Keys Use to adjust the ringer volume in standby
mode and the earpiece volume during a call.
7.SEND Key Use to place or answer calls.
8.Voice Command Key Use for quick access to Voice
Commands and Driving Mode.
9.Manner Mode Key Use to set the mode (from standby
mode press and hold for about 3 seconds).
10. Speaker Key Use to set Speaker On/Off.
11. Right Soft Key Use to select an action within a menu.
12. Navigation Key Use for quick access to messages,
Mobile Web, Get It Now.
13. Message Key Use to retrieve or send voice and text
messages.
14. Clear Key Press to delete a single space or character.
Press and hold to delete entire words. Press this key
once in a menu to go back one level.
15. END/POWER Key Use to turn the power on/off and to
end a call. Also return to the main menu display screen.
16. Alphanumeric Keypad Use to enter numbers and
characters and select menu items.
17. Lock Mode Key Use in standby mode to set the lock
function by pressing and holding the key for about 3
seconds.
18. Microphone
12
VX4500
VX4500
13
Page 8
Menus Over
Menus Over
view
view
Press Left Soft KeyMenu. Press to Scroll.
6. Msg Settings
ontacts
CContacts
1. List Contacts
2. New Number
3. New E-mail
4. Groups
5. Speed Dials
6. My VCard
ecentCC
RRecent
1. Dialed Calls
2. Received Calls
3. Missed Calls
4. Erase Calls
1. Dialed Calls
2. Received Calls
3. Missed Calls
4. All Calls
5. Call Timer
1. Last Call
2. Home Calls
3. Roam Calls
4. All Calls
6. 1x Packet Counter
1. Received
2. Transmitted
3. Total
essages
MMessages
1. Voice Mail
2. New Message
3. Inbox
4. Outbox
5. Saved
alls
alls
1. Auto Save
2. Auto Delete
3. Callback #
4. Msg Alerts
5. Signature
6. Direct View
7. Entry Mode
8. Edit Voice Mailbox #
9. Quick-Text
0. Auto Play
*. Font Size
7. Erase All
1. Inbox
2. Outbox
3. Saved
4. All
GGetetIIttNNow
1. Get Apps
2. Get Info
MMobile
1. Start Browser
2. Web Messages
3. Alert Beep
MMy y MMedia
1. Graphics
2. Music
3. Message Objects
1. Small Pictures
2. Large Pictures
3. My Pictures
ow
obileWWebeb
edia
4. Sounds
5. My Melodies
6. Animations
7. My Animations
oice
VVoice
1. Start Commands
2. Voice Memos
3. Voice Settings
1. Voice Commands
2. Sound Modes
3. Announce Alerts
4. Best Match
5. Train Words
4. Help
ools
TTools
1. Alarm Clock
2. Scheduler
3. Notepad
4. Ez Tip Calc
5. Calculator
6. World Clock
ettings
SSettings
1. Sounds
1. Ringers
2. Key Tone
3. Volume
4. Alerts
5. Power On/Off Tone
2. Display
1. Banner
2. Backlight
3. Screens
4. Menu Style
5. Clocks
6. Theme Colors
7. Status LED Colors
8. Contrast
9. Fonts
0. Language
3. System
1. Select System
2. Set NAM
3. Auto NAM
4. Serving System
4. Security
1. Lock Phone
2. Restrict
3. Emergency #s
4. Change Code
5. Erase Contacts
6. Reset Default
5. Call Setup
1. Auto Retry
2. Answer Call
3. Auto-Answer
4. One-Touch Dial
5. Voice Privacy
6. Auto Volume
7. TTY Mode
6. 1x Data
1. Data/Fax
2. Select Port
3. Port Speed
7. Location
8. Phone Info
1. My Phone Number
2. S/W Version
3. Icon Glossary
4. Shortcut Help
14
VX4500
VX4500
15
Page 9
Getting Y
Getting Y
our Phone Star
our Phone Star
ted
ted
The Battery
NOTE: It is important to fully charge the battery before initial use
of the phone.
The phone comes with a rechargeable battery. Keep the battery
charged while not in use in order to maximize talk and standby
time. The battery charge level is shown at the top of the LCD
screen.
Installing the Battery
To install the battery, insert the bottom of the battery into the
opening on the back of the phone. Push the battery down until
the latch clicks.
Removing the Battery
Tu rn the power off. Lift the release latch to detach the battery.
Charging the Battery
The desktop charger has a charging slot that accommodates
the phone with the battery attached or the battery by itself.
Warning! Use only the desktop charger provided with the
phone. Using any (desktop) charger other than the one
included with the VX4500 may damage your phone or battery.
1. Plug the charger into a wall outlet. The phone must be
charged from a 120V AC power source.
2. Insert the phone with an installed battery, or the battery by
itself, into the charging slot. The red light indicates the
battery is charging and the green light indicates the battery
is fully charged.
The charge time varies depending upon the battery level.
The maximum charge time for a fully discharged battery is
3 hours.
Battery Charge Level
The battery charge level is shown at the top right of the LCD
screen. When the battery charge level becomes low, the low
battery sensor alerts you in three ways: sounding an audible
tone, blinking the battery icon, and displaying
WARNING! If the battery charge level becomes exceedingly low,
the phone automatically switches off and any function in
progress is not saved.
Fully DischargedFully Charged
Turning the Phone On and Off
Tur ning the Phone On
1. Install a charged battery or connect the phone to an external
power source such as a cigarette lighter charger or handsfree car kit.
2. Press for a few seconds until the LCD screen lights up.
NOTE: Like any other radio device, avoid any unnecessary contact
with the antenna while your phone is on.
Tur ning the Phone Off
1. Press and hold until the display turns off.
Signal Strength
Call quality depends on the signal strength in your area. The
signal strength is indicated on the screen as the number of bars
next to the signal strength icon: The more bars, the better the
signal strength. If the signal quality is poor, move to an open
area. If you are in a building, the reception may be better near a
window.
LOW BATTERY
16
VX4500
VX4500
17
Page 10
Getting Y
Getting Y
our Phone Star
our Phone Star
ted
ted
Screen Icons
When the phone is powered on, the top line of the LCD screen
displays icons indicating the status of the phone.
Icon
Signal strength indicator.The strength of the signal received
by the phone is indicated by the number of bars displayed.
No service indicator. The phone is not receiving a system
signal.
In use indicator. A call is in progress.
* No icon indicates the phone is in standby mode.
Digital indicator. Digital service is available.
Roaming indicator.The phone is outside of the home service
area.
1.Make sure the phone is turned on. If not, press .
2. Enter the phone number (include the area code if needed).
3.Press .
lf the phone is locked, enter the lock code.
Call Failed - indicates the call did not go through.
Restricted - indicates outgoing calls are in restricted mode.
NOTE: If the phone is restricted, you can only dial phone
numbers saved in the Emergency Numbers or your
Contacts.
To turn off this function:
Menu -> Settings -> Security -> Enter Lock
Code -> Restrict -> Off -> OK
4.Press or the side keys twice to end the call.
Correcting Dialing Mistakes
If you make a mistake while dialing a number, press once
to erase the last digit entered or hold downfor at least 2
seconds to delete all digits.
Redialing Calls
1. Press twice to redial the last number you dialed. The
last 30 numbers are stored in the call history list and you can
also select one of these to redial.
Receiving Calls
1.When the phone rings or vibrates press to answer.
NOTE: If you press or the side keys while the phone is
ringing, the ringing or vibration is muted for that call.
2. Press or the side keys twice to end the call.
18
VX4500
VX4500
19
Page 11
Quick Access to Convenient Featur
Quick Access to Convenient Featur
es
es
Manner Mode
Use Manner Mode in public places. When Manner Mode is set,
is displayed on the screen, the key tones are silent, and the
phone is set to vibrate.
Manner Mode Quick Activation
1. From standby mode press for 3 seconds.
NOTE: The phone remains in Manner Mode even if you turn it
off and back on.
Manner Mode Quick Cancellation
1. Press to switch to Silence All Mode or Normal Mode.
NOTE: When folder is closed, you can press (lower side key)
for three seconds to set Manner mode.
Silence All Mode
Use Silence All Mode in public places. When Silence All Mode is
set, is displayed on the screen, the key tones are silent, and
the lamp blinks instead of the phone ringing or vibrating.
Silence All Mode Quick Activation
1. Set the ringer to Silent by pressing
Silence All Mode Quick Activation
1. Press(upper side key) to switch to Normal Mode.
(lower side key).
Lock Mode
Use Lock Mode to prevent others from using your phone.
When Lock Mode is set, is displayed on the screen and your
4-digit password is required to use the phone.
NOTE: The lock code/password is the last 4 digits of your phone
number.
Lock Mode Quick Activation
1. From standby mode, pressfor 3 seconds.
Lock Mode Quick Cancellation
1.
Press Right Soft KeyUnlock then enter your 4-digit password.
Mute Function
The Mute function prevents the other party from hearing your
voice, but allows you to hear the other party.
Mute Quick Activation
1. Press Left Soft Key Mute during a call.
Mute Quick Cancellation
1. Press Left Soft Key again.
Volume Quick Adjustment
Use the side keys to adjust the earpiece and ringer volumes. The
upper key increases the volume and the lower key decreases the
volume.
●Earpiece volume can be adjusted during a call.
●Ringer volume can be adjusted while the phone is ringing.
NOTE: Key beep volume is adjusted through the Menu.
20
VX4500
VX4500
21
Page 12
Quick Access to Convenient Featur
Quick Access to Convenient Featur
es
es
Call Waiting
Your cellular service may offer call waiting. While a call is in
progress, two beeps indicate another incoming call. When call
waiting is enabled, you may put the active call on hold while
you answer the other incoming call. Check with your cellular
service provider for information about this function.
1. Press to receive a waiting call.
2.Press again to switch between calls.
Caller ID
Caller ID displays the number of the person calling when your
phone rings. If the caller’s identity is stored in Contacts, the
name appears with the number. Check with your service
provider to ensure they offer this feature.
Speed Dialing
Speed dialing is a convenient feature that allows you to make
phone calls quickly and easily with a few keystrokes. Your phone
recalls the number from your Contacts, displays it briefly, and
then dials it. Speed Dial number 1 is always for Voice mail.
Dialing Speed Dials from 2 to 9
1. Press and hold the Speed Dial number.
OR
Enter the speed dial number and press .
Dialing Speed Dials from 10 to 99
1. Press the first digit and then press and hold the key of the
last digit.
OR
Enter the first and second digits and press
.
Voice Command
Voice Command is a convenient feature that allows you to
activate certain feature quickly and easily by verbal command.
Using this Voice Commands, you can make phone calls,
confirm voice mails and missed calls, set driving/announce
mode, edit the contact entries and so on.
1. Press the Voice Command key ( ).
2. When prompted, say "Call Someone."
3. When prompted, say the name entered in your contacts.
The phone will ask you to confirm the name, then dial the
number associated with the Contact name.
NOTE: Another way to activate Voice Command is to set
Announce Mode to on. When the flip is opened you will be
asked to say a command.
22
VX4500
VX4500
23
Page 13
Entering and Editing Infor
Entering and Editing Infor
mation
mation
Text Input
You can input and edit your Banner, Schedule, Contacts,
Notepad and messages.
Clear: Press to delete a single space or character.
Hold to delete words.
Punctuation: In T9 mode, press to insert
punctuation in a word and complete a sentence.
Text Input Modes
There are five modes for entering text, numbers, special characters,
and punctuation. In a text entry field, pressing Right Soft Key
(or Right Soft Key ) displays a pop-up list of text modes.
NOTE: It reads out the letter or the number, when the Announce
Mode is On.
T9Word (T9) Mode
Use to type text using one keystroke per letter. The phone
translates keystrokes into common words by using the letters
on each key and a compressed database.
Abc (Multi-tap) Mode
Use to add words to the T9 database.
123 (Numbers) Mode
Use to type numbers using one keystroke per number.
Symbols Mode
Use to insert special characters or punctuation. There are 39
special characters including “SP” which inserts a space and
“LF” which forces the text to the next line.
Smiley Mode
Use to insert smiley graphics. There are 40 smiley characters.
Changing Letter Case
Using T9 and Abc text input modes you can set the
capitalization. Press to cycle through the following:
24
VX4500
Initial Cap (T9Word / Abc)
Only the first letter is capitalized. All subsequent letters are lower
case.
VX4500
25
Page 14
Entering and Editing Infor
Entering and Editing Infor
mation
mation
Caps Lock (T9WORD / ABC)
All letters are capitalized.
Lower case (T9word / abc)
All letters are in lower case.
Text Input Examples
Display the text modes and select a text mode:
1.In a text entry field, press Right Soft Key(or Left Soft Key
) to display text modes.
2.Press to highlight the text input mode you want to use.
3.Press to select the highlighted text input mode.
Using Abc (Multi-tap) Text Input
1. Press Right Soft Key (or Left Soft Key ) to change
to Abc mode.
2. Press to change to ABC Caps Lock.
3. Press .
LG is displayed.
Using T9 Mode Text Input
To type the message “Call the office” follow these steps:
1.Press Right Soft Key(or Left Soft Key ) to change to
T9Word mode.
2.Press .
3.Press to complete the word and add a space.
4.Press .
Call the office is displayed.
Using the NEXT Key
After you have finished entering a word, if the word displayed
is not the one you want, press to display additional
choices of words from the database.
1. Press .
Good is displayed.
2. Press .
The display gives you additional choices such as:
Gone, Hood, etc.
Adding Words to the T9 Database
If a word is not in the T9 database, add it using Abc (Multi-tap)
mode text entry. The word is automatically added to the T9
database.
1. Press Right Soft Key(or Left Soft Key ) to change to
Abc (multi-tap) mode.
2. Press .
Bop is displayed.
3.Press Right Soft Key(or Left Soft Key ) to change to
T9 mode to add the word Bop to the T9 database.
4. Press to erase the existing word.
5. Press .
Cop is displayed.
6. Press .
Bop is displayed.
Home,
26
VX4500
VX4500
27
Page 15
Contacts in Y
Contacts in Y
our Phone’
our Phone’
s Memoryy
s Memor
Contacts Entries
This allows you to have easy access to your most frequently
dialed phone numbers. You may store up to 499 entries with up
to 5 phone numbers each. Each entry may be up to 22
characters. Each phone number may be up to 48 digits.
The Basics of Storing Contacts Entries
1. From standby mode enter the phone
number you want to save (up to 48 digits).
2. Press Left Soft Key Save.
3. Use to select a Label and press .
Home / Home2 / Office / Office2 / Mobile
/ Mobile2 / Pager / Fax / Fax2 / None
4. Use to select New Name or Existing
and press .
NOTE: Use Existing to add another phone
number to a contact already stored in
memory.
NOTE:
To skip name entry, press to go to
the next step.
NOTE: If the information is complete, press
to return to the Main Menu screen.
NOTE: To further customize the Contact entry,
press Left Soft Key Done.
6. Continue saving the entry as a Speed Dial,
press to select Speed Dial.
7. Enter a Speed Dial digit (e.g., 2)
Use the keypad and press or
Use to highlight the Speed Dial
location and press.
28
VX4500
5. Enter a name for the phone number (up to
22 characters) and press .
A confirmation message is displayed briefly.
VX4500
29
Page 16
Contacts in Y
Contacts in Y
our Phone’
our Phone’
s Memoryy
s Memor
Options to Customize Your Contacts
Once basic phone number and name information is stored in
your Contacts, you can edit and/or customize the entries.
1.Enter the phone number and name as described on the
previous page.
2.Press Left Soft Key Done to access the Edit Entry screen.
3.Use to highlight the information you want to customize
and press .
Adding or Changing the Group
Allows you to manage your Contacts entries by organizing
them into groups.
1.Access your Contacts and use to highlight an entry,
then press .
2.Press Left Soft Key Edit.
3.Use to highlight
4.Use to select the Group and press .
No Group / Family / Friends / Colleagues / Business /
School
5.Press Left Soft Key Done to continue editing the Contact
entry.
NOTE: You can change the name of the group, add groups, and
delete groups.
No Group and press .
Changing the Call Ringer
Allows you to identify who is calling by setting different ringers
for different phone numbers in your Contacts. It is automatically
set to the default ringer when the Contact is saved.
1. Access your Contacts and use to highlight an entry,
then press .
2. Press Left Soft Key Edit.
3. Use to highlight
4. Use to select the Ringer Type and press.
5. Press Left Soft Key Done to continue editing the Contact
entry.
Changing the Message Ringer
Allows you to identify who is sending you a message by setting
different ringers for different phone numbers in your Contacts. It
is automatically set to the default ringer when the Contact is
saved.
1.Access your Contacts and use to highlight an entry,
then press .
2.Press Left Soft Key Edit.
3.Use to highlight
.
4.Use to select the Ringer Type and press .
5.Press Left Soft Key Done to continue editing the Contact
entry.
Default Ringer and press.
Default Text Msg Ringer and press
30
VX4500
VX4500
31
Page 17
Contacts in Y
Contacts in Y
our Phone’
our Phone’
s Memoryy
s Memor
Adding or Changing the Memo
Allows you to enter up to 64 characters as a memo to the
Contact entry.
1.Access your Contacts and use to highlight an entry,
then press .
2.Press Left Soft Key Edit.
3.Use to highlight
4.Enter text and press.
5.Press Left Soft Key Done to continue editing the Contact
entry.
Adding or Changing the Picture ID
Allows the phone to display a picture to identify the caller.
1.Access your Contacts and use to highlight an entry,
then press .
2.Press Left Soft Key Edit.
3.Use to highlight
4.Use to select a graphic and press Left Soft Key
Select.
5.Press Left Soft Key Done to continue editing the
Contact entry.
Memo and press .
Default and press.
Changing the Secret Setting
Allows you to hide certain entries from being displayed when
the Contacts are searched.
1.Access your Contacts and use to highlight an entry,
then press .
2.Press Left Soft Key Edit.
3.Use to highlight Not Secret and press .
4.Use to select the Secret setting and press.
5.Press Left Soft Key Done to continue editing the Contact
entry.
Adding or Changing the URL
Allows you to enter a Web address associated with the Contact
entry.
1.Access your Contacts and use to highlight an entry,
then press .
2.Press Left Soft Key Edit.
3.Use to highlight
4.Enter a Web address and press .
5.Press Left Soft Key Done to continue editing the Contact
entry.
URL and press .
32
VX4500
VX4500
33
Page 18
Contacts in Y
Contacts in Y
our Phone’
our Phone’
s Memoryy
s Memor
Adding Speed Dial
1.Access your Contacts and use to highlight an entry,
then press .
2.Press Left Soft Key Edit.
3.Use to highlight the phone number you want to set
with a Speed Dial and press.
4.Press to select
5.Enter a Speed Dial digit.
Use the Keypad and press , or Use to highlight
the Speed Dial digit and press.
6.Press Left Soft Key Done to continue editing the
Contact entry, or
Press to return to the Main Menu.
Speed Dial.
Editing Contacts Entries
Adding Another Phone Number
From the Main Menu Screen
1.From standby mode, enter the phone number you want to
save (up to 48 digits).
2.Press Left Soft Key Save.
3.Use to highlight a Label and press .
Home / Home2 / Office / Office2 / Mobile / Mobile2 /
Pager / Fax / Fax2 / None
4.Use to highlight Existing and press .
5.Use to highlight the existing Contact entry and press
.
A confirmation message is displayed.
Through Contacts
1.From standby mode, press Right Soft KeyContacts.
Your Contacts display alphabetically.
2.Use to highlight the Contact entry you want to edit,
then press .
3.Press Left Soft Key Edit.
4.Use to highlight Add Number, then press .
5.Enter the number and press.
6.Use to highlight a Label, then press .
A confirmation message is displayed.
34
VX4500
VX4500
35
Page 19
Contacts in Y
Contacts in Y
our Phone’
our Phone’
s Memoryy
s Memor
Default Numbers
The phone number saved when a Contact is created is the
Default Number. If more than one number is saved in a Contact
entry, another number can be saved as the Default Number.
NOTE: The Default Number cannot be deleted by itself. The entire
Contact entry can be deleted or another number can be set
as the Default Number allowing you to delete the original
saved number and keep the Contact entry.
Changing the Default Number
1.From standby mode, press Right Soft Key Contacts.
Your Contacts display alphabetically.
2.Use to highlight the Contact entry you want to edit,
then press .
3.Press Left Soft Key Edit.
4.
Use to highlight the phone number you want to set as
the Default Number and press Right Soft Key Options.
5.Press Set as Default#.
A confirmation message is displayed.
Editing Stored Phone Numbers
1.From standby mode, press Right Soft KeyContacts.
Your Contacts display alphabetically.
2.Use to highlight the Contact entry you want to edit,
then press .
3.Press Left Soft Key Edit.
5.Edit the phone number as necessary and press .
Editing Stored Names
1.From standby mode, press Right Soft KeyContacts.
Your Contacts display alphabetically.
2.Use to highlight the Contact entry you want to edit,
then press .
3.Press Left Soft Key Edit.
4.Use to highlight the name and press .
5.Edit the name as necessary and press .
Editing Customized Options
Edit any of the Contacts options in the same manner as when
the Contact is created.
1.From standby mode, press Right Soft KeyContacts.
Your Contacts display alphabetically.
2.Use to highlight the Contact entry you want to edit,
then press.
3.Press Left Soft Key Edit.
4.Use to highlight the information you want to
customize and press .
5.Edit the information as necessary and press .
4.Use to highlight the phone number and press .
36
VX4500
VX4500
37
Page 20
Contacts in Y
Contacts in Y
our Phone’
our Phone’
s Memoryy
s Memor
Deleting
Deleting a Phone Number from a Contact
1. Press Right Soft KeyContacts.
2. Use to highlight the Contact entry, then press .
3. Press Left Soft Key Edit.
4. Use to highlight the phone number to be deleted.
5. Press Right Soft KeyOptions.
6. Press Erase Number.
7. Press Erase number.
A confirmation message is displayed.
Deleting a Contact Entry
1. Press Right Soft Key Contacts.
2. Use to highlight the Contact entry to be deleted, then
press .
3. Press Right Soft KeyOptions.
4. Press Erase Entry.
5. Press Erase.
A confirmation message is displayed.
Deleting a Speed Dial
1. Press Right Soft KeyContacts.
2. Use to highlight the Contact entry, then press .
3. Use to highlight the Speed Dial number.
4. Press Left Soft Key Edit.
5. Use to highlight the Speed Dial number and press.
6. Use to highlight the Speed Dial entry and press .
7. Use to highlight the Speed Dial location.
8. Press Right Soft Key Options.
9. PressRemove.
10. PressRemove.
A confirmation message is displayed.
Additional Ways to Delete a Contact
Once you have accessed your Contacts, pressing Right Soft
KeyOptions. at any point provides the option to erase the
entry.
38
VX4500
VX4500
39
Page 21
Contacts in Y
Contacts in Y
our Phone’
our Phone’
s Memoryy
s Memor
Phone Numbers With Pauses
When you call automated systems such as voice mail or credit
billing numbers, you often have to enter a series of numbers.
Instead of entering these numbers by hand, you can store the
numbers in your Contacts separated by special pause
characters (P, T). There are two different types of pauses you
can use when storing a number:
Hard pause (P)
The phone stops dialing until you press Left Soft KeyRelease
to advance to the next number.
2-sec pause (T)
The phone waits 2 seconds before sending the next string of digits.
Storing a Number With Pauses
1.Press Left Soft Key Menu.
2.Press Contacts.
3.Press New Number.
4.Enter the number.
5.Press Right Soft KeyPause.
6.Use to select pause type and press.
Hard Pause / 2-sec pause
7.Enter additional number(s) (e.g., pin number or credit card
number) and press .
8.Use to select a Label and press .
9.Enter a name (up to 22 characters).
A confirmation message is displayed.
Adding a Pause to an Existing Number
1.Press Right Soft KeyContacts.
2.Use to highlight the Contact entry to edit, then press
.
3.Press Left Soft Key Edit.
4.Use to highlight the number then press .
5.Press Right Soft Key Pause.
6.Press Hard pause or 2-sec pause.
7.Enter additional number(s) and press .
8.Use to select the label type and press .
A confirmation message is displayed.
40
VX4500
VX4500
41
Page 22
Contacts in Y
Contacts in Y
our Phone’
our Phone’
s Memoryy
s Memor
Searching Your Phone’s Memory
The VX4500 phone is able to perform a dynamic search of the
contents in your phone’s memory. A dynamic search compares
entered letters or numbers against the entries in your Contacts.
A matching list is displayed in descending order. You can then
select a number from the list to call or edit. There are several
ways to search:
●Scrolling Alphabetically
●Searching by Letter
●Searching by Options
- Find Name - Find Group
- Find Number - Find E-mail
- Find Speed Dial - Send Message
- Erase
Scrolling Through Your Contacts
1.Press Right Soft Key Contacts.
Contacts list is displayed alphabetically.
2.Use to scroll through the list.
Searching by Letter
1.Press Right Soft Key Contacts.
Contacts list is displayed alphabetically.
2.Press (or press repeatedly) the key on the keypad that
corresponds with the search letter.
Searching Options
1.Press Right Soft Key Contacts.
2.Press Right Soft Key Options.
3.Select the search criteria using (or press the
corresponding number on the keypad):
Find Name - Enter the character(s) to search for (such
as the first letters of the name).
Find Number - Enter the number(s) to search.
Find Speed Dial - Enter the speed dial number(s) to
search.
Find Group - Use to highlight the group to
search for and press .
Find E-mail -Enter the email address to search.
Send Message - Enter the text and press .
Erase - Press Erase to erase the entry.
4.A list of matches is displayed.
Use to highlight a matched entry.
5.Press to see more information or press to place a
call.
42
VX4500
VX4500
43
Page 23
Contacts in Y
Contacts in Y
our Phone’
our Phone’
s Memoryy
s Memor
Making a Call From Your Phone’s Memory
Once you have stored phone numbers into your Contacts, you
can place calls to those numbers quickly and easily.
●Pressing after you’ve searched for a phone number in
Contacts or Recent Calls.
●Using Speed Dialing.
From Contacts
1.Press Right Soft KeyContacts.
2.Use to select the Contact entry and press .
3.Use to select the phone number.
4.Press to place the call.
From Recent Calls
1.Press Left Soft Key Menu.
2.Press Recent Calls.
3.Use to select the type of recent call and press .
Dialed Calls / Received Calls / Missed Calls
4.Use to highlight the phone number.
5.Press to place the call.
Voice Command
Call Someone is a convenient feature that allows you to make
phone calls quickly and easily by saying a voice command that
you have recorded in your Contacts.
To make a Voice Command:
1.From standby mode, press the Voice Command key ( ).
2.When prompted, say "Call someone."
3.When prompted, say the name of the Contact you want to
call.
The phone confirms and dials the phone number
associated with the Contact.
Prepending a Stored Number
Prepend can be used if you are out of your home system area
and need to add the area code to an existing number. When a
Contacts entry or message callback number shows up on the
display, you can add to the beginning of the original number.
However, you cannot edit the original number.
1.Recall a number in your Recent Calls.
2.Press Right Soft Key Options.
3.Press Prepend.
4.Enter the prepend digits to the phone number.
5.Press to place the call.
44
VX4500
VX4500
45
Page 24
Using Phone Menus
Using Phone Menus
Menu Access
Press Left Soft KeyMenu to have access to nine phone
menus. There are two methods to access menus and submenus:
●Use the navigation key to highlight and select, or
●Press the number key that corresponds to the menu or
submenu.
For example:
1.Press Left Soft Key Menu.
Nine menu items are displayed.
Use to scroll through the list of menus.
2.Press the appropriate number key corresponding to the
menu item you want to select.
The sub-menu list will be displayed.
3.Press the appropriate number key corresponding to the
sub-menu you want to access.
4.Use to highlight your preferred setting and press
to select it.
NOTE: Press to go back one step while accessing the
menu or selecting a setting.
NOTE: Press to cancel without saving.
Contacts (Menu )
The Contacts Menu allows you to store names, phone numbers
and other information in your phone’s memory. When you
access your Contacts, the number in parenthesis represents the
number of entries you have stored (up to 499).
Access and Options
1. Press Left Soft Key Menu.
2. Press Contacts.
3. Select a sub-menu.
●List Contacts
●New Number
●New E-mail
●Groups
●Speed Dials
●My VCard
46
VX4500
VX4500
47
Page 25
Using Phone Menus
Using Phone Menus
List Contacts (Menu )
Allows you to view your Contacts list.
1. Press Left Soft Key Menu.
2.Press Contacts.
3.Press List Contacts.
4.Options from here:
●Press to scroll through your Contacts alphabetically.
●Press Right Soft Key Options to select one of the
following:
Find Name / Find Number / Find Speed Dial /
Find Group / Find E-mail / Send Message / Erase
●Press Left Soft Key New to store a new phone
number or new e-mail.
New Number (Menu )
Allows you to add a new number.
NOTE: Using this sub-menu, the number is saved as a new
Contact. To save the number into an existing Contact, edit
the Contact entry.
1. Press Left Soft Key Menu.
2.Press Contacts.
3.Press New Number.
4.Enter the number and press .
5.Select the label you want and press .
6.Enter the name and press .
7.Continue saving the entry as necessary.
New E-mail (Menu )
Allows you to save a new e-mail address.
NOTE: Using this sub-menu, the e-mail is saved as a new Contact.
To save the number into an existing Contact, edit the
Contact entry.
1. Press Left Soft Key Menu.
2.Press Contacts.
3.Press New E-mail.
4.Enter the e-mail address and press .
5.Enter the name and press .
6.Continue saving the entry as necessary.
Groups (Menu )
Allows you to view your grouped Contacts, add a new group,
change the name of a group, or delete a whole group.
1.Press Left Soft Key Menu.
2.Press Contacts.
3.Press Groups.
4.Options from here:
●Use to highlight a group to view and press .
Press Left Soft Key Add to add a new group to the list.
●
●Use to highlight a group and press Right Soft
Key Options to change the name of the group or
delete the group.
48
VX4500
VX4500
49
Page 26
Using Phone Menus
Using Phone Menus
Speed Dials (Menu )
Allows you to view your list of Speed Dials or designate Speed
Dial for numbers entered in your Contacts.
1.Press Left Soft Key Menu.
2.Press Contacts.
3.Press Speed Dials.
4.Use to highlight the Speed Dial position, or enter the
Speed Dial digit and press .
5.Use to highlight the Contact and press .
6.Use to highlight the number and press .
A confirmation message is displayed.
My VCard (Menu )
Allows you to enter your own virtual business card to be used
in e-mails or SMS messages.
1.Press Left Soft Key Menu.
2.Press Contacts.
3.Press My VCard.
4.Select the feature you want to edit by highlighting it and
pressing .
Recent Calls (Menu )
The Recent Calls Menu is a list of the last phone numbers or
Contact entries for calls you placed, accepted, or missed. It is
continually updated as new numbers are added to the
beginning of the list and the oldest entries are removed from
the bottom of the list.
NOTE: To view a quick list of all your recent calls, press from
the Main Menu.
●indicates a dialed call.
●indicates a received call.
●indicates a missed call.
Access and Options
1.Press Left Soft Key Menu.
2.Press Recent Calls.
3.Select a sub-menu.
●Dialed Calls
●Received Calls
●Missed Calls
●Erase Calls
●Call Timer
50
VX4500
●1x Packet Counter
VX4500
51
Page 27
Using Phone Menus
Using Phone Menus
Dialed Calls (Menu )
Allows you to view the list of outgoing calls; up to 30 entries.
1.Press Left Soft Key Menu.
2.Press Recent Calls.
3.Press Dialed Calls.
4.Useto highlight an entry, then
●Press to view the entry.
●Press to place a call to the number.
●Press Right Soft Key Options to select:
Contact Info / Send Msg. / Prepend / Erase / Erase all
Received Calls (Menu )
Allows you to view the list of incoming calls; up to 30 entries.
1.Press Left Soft Key Menu.
2.Press Recent Calls.
3.Press Received Calls.
4.Use to highlight an entry, then
●Press to view the entry.
●Press to place a call to the number.
●Press Right Soft KeyOptions to select:
Contact Info / Send Msg. / Prepend / Erase / Erase all
Missed Calls (Menu )
Allows you to view the list of missed calls; up to 30 entries.
1.Press Left Soft Key Menu.
2.Press Recent Calls.
3.Press Missed Calls.
4.Use to highlight an entry, then
●Press to view the entry.
●Press to place a call to the number.
●Press Right Soft KeyOptions to select:
Contact Info / Send Msg. / Prepend / Erase / Erase all
Erase Calls (Menu )
Allows you to erase selected call list(s).
1.Press Left Soft Key Menu.
2.Press Recent Calls.
3.Press Erase Calls.
4.Use to highlight the list of calls to erase and press .
Dialed Calls / Received Calls / Missed Calls / All Calls
5.Press Erase or Cancel.
52
VX4500
VX4500
53
Page 28
Using Phone Menus
Using Phone Menus
Call Timer (Menu )
Allows you to view the duration of selected calls.
1.Press Left Soft KeyMenu.
2.Press Recent Calls.
3.Press Call Timer.
4.Use to highlight a call list and press .
Last Call / Home Calls / Roam Calls / All Calls
1x Packet Counter (Menu )
Allows you to view the list of received and transmitted data calls.
1.Press Left Soft Key Menu.
2.Press Recent Calls.
3.Press 1x Packet Counter.
4.Use to highlight a data call list and press .
Received / Transmitted / Total
Messages (Menu )
Text messages, pages, and the voice mail box become available
as soon as the phone is powered on.
●Check types of messages by pressing the message key .
●Make a call to the callback number by pressing during
a message check.
●Read and edit messages saved in the outbox during
transmission and send them.
The phone can store up to 116 messages (for example, 1 voice
message, 50 inbox text messages, 50 outbox text messages, 15
saved text messages). The VX4500 supports up to 160
characters per message including header information. The
information stored in the message is determined by phone
mode and service capability. Other limits to available characters
per message may exist. Please check with your service provider
for system features and capabilities.
New Message Alert
There are three ways your phone alerts you to new messages.
1.The phone displays the message on the screen.
2. One of five ring types is heard, if selected.
3.The message icon () is displayed on the display screen.
In the case of an urgent message, the icon will flash and
Urgent is displayed.
54
VX4500
NOTE: If you receive the same message twice, your phone
deletes the older one and the new one is stored as a
DUPLICATE.
VX4500
55
Page 29
Using Phone Menus
Using Phone Menus
Access and Options
1.Press Left Soft Key Menu.
2.Press Messages.
3.Select a sub-menu.
●Voice Mail: Shows the number of
messages in voice mail box.
●New Message: Sends a message.
●Inbox: Shows the list of received
messages.
●Outbox: Shows the list of sent
messages.
●Saved: Shows the list of saved and
draft messages.
●Msg Settings: Selects alert type
for new messages.
●Erase All: Deletes all stored
messages.
Voice Mail (Menu )
Allows you to view new voice messages recorded in the voice
mail box. Once you exceed the storage limit, old messages are
overwritten. When you have a new voice message, your phone
alerts you.
Checking Your Voice Mail Box
1. Press Left Soft Key Menu.
2.Press Messages.
3.Select Voice Mail.
4.Options from here:
●Press Left Soft KeyClear to delete information,
and then select Clear.
●Press to listen to the message(s).
New Message (Menu )
Allows you to send text messages, pages, and
e-mail transmissions. Each message has a destination (Address
1) and information (Message). These are dependent upon the
type of message you want to send.
The Basics of Sending a Message
56
VX4500
1.Press Left Soft Key Menu.
2.Press Messages.
3.Press New Message.
4.Enter the message destination in Address 1.
VX4500
57
Page 30
Using Phone Menus
Using Phone Menus
● SMS phone number for a text message.
● SMS phone number for a page.
● E-mail address for an e-mail message.
5.Press .
NOTE: To send a page, press Left Soft Key Send now.
6.Press to access the message screen.
7.Type your message (text or e-mail) then press .
8.Press Left Soft Key Send.
A confirmation message is displayed.
NOTE: If you send an SMS message to a phone without
SMS, you will still be notified that the message was
sent, however the message will not be received.
Customizing the Message Using Options
1.Create a new message.
2.Press Right Soft Key Options.
3.Select the option(s) to customize.
SendSends the message.
PriorityGives priority to the message.
Callback #Inserts a pre-programmed callback number
with your message.
On / Off / Edit
DeferredDelays sending the message until the
programmed time frame.
Immediate / After 3 days / After 2 days
/ After 1 day / After 12 hours / After 2
hours / After 1 hour / After 30 minutes
ValidityValidates delivery to the Short Message
Center (SMC) without being transmitted to
the destination address for certain periods
of time. Those messages will be deleted
within the programmed time frame.
Default / 3 days / 2 days / 1 day / 12
hours / 2 hours / 1 hour / 30 minutes
Delivery Notice
Enhanced / On
SaveSaves the message into the saved folder.
Erase FieldDeletes address or contents of message
field.
4.Complete and send the message.
Using Contacts to Send a Message
You can designate an entry saved in your Contacts as Address 1
instead of manually entering the destination.
1.Press Left Soft Key Menu.
2.Press Messages.
3.Select New Message.
4.Press Left Soft KeyContacts.
5.Use to highlight the Contact entry containing the
destination and press .
6.Use to highlight the SMS phone number or e-mail
address and press .
NOTE: The Address 1 feature allows multi-sending of up to 10
total addresses.
7. Complete the message as necessary.
58
VX4500
VX4500
59
Page 31
Using Phone Menus
Using Phone Menus
Text Options
While you are composing the text of a message you can insert
customized text.
1.Create a new message.
2.Use to highlight Message then press .
3.Press Right Soft Key Options.
4.Select the option(s) to customize.
Insert Quick-Text
Inserts predefined phrases.
Ye s / No / Call Me / Need Directions /
Where Are You? / Will Call Later /
Busy / On My Way / Will Arrive 15
Minutes / Thank You / Love You
Insert ObjectInserts objects into the message.
Small Pictures / Large Pictures / My
Pictures / Sounds / My Melodies /
Animations / My Animations
Format TextAllows you to change the look of the text.
Alignment / Font Size / Font Style /
Text Color / Background
Save Quick-Text
Allows you to define phrases to insert as
Insert Quick Text.
Insert Signature
Inserts a predefined signature.
Custom / My VCard
5.Complete and send or save the message.
Message Icon Reference
Icons
Sent
Fail
Delivery
Cancel
Lock
Multi-
sending
Pending
Descriptions
Messages saved in Short Message Center (SMC) have
been transmitted.
Indicates a failed message transmission.
Message has been delivered.
After transmission to message center has occurred,
messages that have not been delivered may be canceled
by transmitting cancel message.
Indicates that messages are locked.
Indicates more than one designated recipient.
Tr ansmission is unavailable in a no service area.
Messages are pending transmission. Pending messages
are transmitted automatically when digital mode
becomes available.
Inbox (Menu )
The phone alerts you in 3 ways when you receive a new message:
●By displaying a message notification on the screen.
●By sounding a beep or vibrating, if set.
●By blinking . (Only when you get a urgent message)
Received text messages, page messages, and e-mail lists may
be searched and the contents viewed. Received messages are
displayed from newest to oldest.
60
VX4500
VX4500
61
Page 32
Using Phone Menus
Using Phone Menus
Out of Memory Warning
If the memory is full, no more messages can be received until
enough memory space becomes available. The message NOT
ENOUGH MEMORY is displayed and new messages are not
accepted.
Viewing Your Inbox
1.Press Left Soft Key Menu.
2.Press Messages.
3.Press Inbox.
4.Options from here:
● Left Soft KeyReply.
● Right Soft KeyOptions.
Reply w Copy
ForwardForwards a received message to others
EraseDeletes the selected message from the
Save Address
Save Object Saves pictures, animations, sounds,
Save Quick-Text
Replies to the SMS with the original
message attached.
destination address(es).
Inbox.
Stores the callback number, e-mail address,
and numbers in user data included in the
received message into your Contacts.
melodies and vcard objects in Message
Objects and Contacts allowing you to use
Wallpaper and Ringtone.
Saves the message into the Canned message
list.
Save Message
Lock/Unlock Locks or unlocks the selected message.
Outbox (Menu )
Up to 50 sent messages can be stored in the Outbox. View lists
and contents of sent messages and verify whether the
transmission was successful or not.
1.Press Left Soft Key Menu.
2.Press Messages.
3.Press Outbox.
4.Press Left Soft Key Resend.
Press Right Soft KeyOptions.
EraseDeletes the selected message from the
Lock/Unlock Locks a message so that it is not erased if the
Saved (Menu )
Displays saved messages and draft messages.
1.Press Left Soft Key Menu.
2.Press Messages.
3.Press Saved.
4.Press Left Soft Key Resume.
Press Right Soft KeyOptions.
Saves Inbox message into the Saved Folder.
Locked messages can not be deleted by the
Erase Inbox and Erase All functions.
Outbox.
Erase Outbox or Erase All feature is used.
62
VX4500
VX4500
63
Page 33
Using Phone Menus
Using Phone Menus
EraseDeletes the selected message.
Lock/Unlock
Locks a message so that it is not erased if the
Erase Saved or Erase All feature is used.
Msg Settings (Menu )
Allows you to configure ten settings for received messages.
1.Press Left Soft Key Menu.
2.Press Messages.
3.Press Msg Settings.
4.Use to highlight one of the settings and press to
select it.
Auto SaveAuto Save / Prompt / Do not Save
Auto Delete On / Off
Callback #On / Off
Msg AlertsVoice Mail Alert / Text Msg Alert /
Email Alert / Page Alert / 2 MIN Alert
SignatureNone / Custom / My VCard
Direct View On / Off
Entry ModeT9 Word / Abc / 123
Edit Voice Mailbox #
Quick-Text
Auto PlayOn / Off
Font SizeSmall / Normal
Message Settings Sub-Menu Descriptions
Auto Save (Menu )
With this feature on, messages are automatically saved in the
Outbox when transmitted.
Auto Delete (Menu )
With this feature on, read messages are automatically deleted
when you exceed the storage limit.
Callback # (Menu )
Allows you to automatically send a designated callback number
when you send a message.
Msg Alerts (Menu )
Allows you to select the alert type for a new message. Alert
types are Voice Mail Alert, Text Msg Alert, Email Alert,Page Alert, and 2 MIN Alert.
Signature (Menu )
Allows you make/edit a signature to automatically send with
your messages.
Direct View (Menu )
Allows you to directly display the content when receiving a message.
Entry Mode (Menu )
Allows you to select the default input method including T9 Word,
Abc, 123.
Edit Voice Mailbox # (Menu )
Allows you to manually enter the access number for Voice Mail
Service. This number should only be used when VMS access
number is not provided from the network.
64
VX4500
VX4500
65
Page 34
Using Phone Menus
Using Phone Menus
Quick-Text (Menu )
Display, edit, and add Canned Messages.
Auto Play (Menu )
Display automatically scrolls down while viewing messages.
Font Size (Menu )
Allows you to determine the font to use when entering message
content or reading text Inbox, Outbox, and Saved Msgs Folders.
Erase All (Menu )
Allows you to erase all text messages stored in your Inbox,
Outbox, or Saved Msgs Folders. You can also erase all messages
at the same time.
1. Press Left Soft Key Menu.
2.Press Messages.
3.PressErase All.
●
Press Inbox to erase all messages stored in the Inbox.
● Press Outbox to erase all messages stored in the
Outbox.
● Press Saved to erase all messages stored in the
Saved Msgs Folders.
● Press All to erase all messages stored in the Inbox,
Outbox, and Saved Msgs Folders.
4.Press Erase all.
Confirmation message is displayed.
Get It Now (Menu)
Get It Now allows you to do more than just talk on your phone.
Get It Now is a technology and service that allows you to
download and use applications on your phone. With Get It
Now, it is quick and easy to personalize your phone to your
lifestyle and tastes. Just download the applications that appeal
to you. With a wide range of software available, from Ring
Tones to games to productivity tools, you can be assured that
you can find something useful, practical, or down right
entertaining. There are constantly new applications being
created for your use.
Downloading Applications
You can download applications and use Get It Now anywhere
on the Verizon Wireless network, as long as your handset has a
digital signal available. Most applications do not use a network
connection while in use.
Incoming Calls
While downloading an application, incoming calls will
automatically be sent to your voice mail, if available. If you do
not have voice mail, downloading will not be interrupted by an
incoming call, however the caller will receive a busy signal.
When using applications, an incoming call will automatically
pause the application and allow you to answer the call. When
you complete your call, you can resume using the application.
66
VX4500
VX4500
67
Page 35
Using Phone Menus
Using Phone Menus
Access and Options
1.Press Left Soft Key Menu.
2.Press Get It Now.
3.Options from here:
●Get Apps: To add, delete, or
disable Get It Now applications.
●Get Info: To view information
about Get It Now applications.
Get Apps (Menu )
Allows you to download selected applications while displaying
the Get It Now application list relayed from the Get It Now
server connection.
1. Press Left Soft Key Menu.
2.Press Get It Now.
3.Select Get Apps.
4.Press .
5.Select [Get It Now] Icon and press .
NOTE: Pressing the right arrow key will start Get It Now.
NOTE: When the file memory is full, the message "File
Memory Full. To make enough storage space to install
this app,the following app(s) will be temporarily
disabled : %s. You can restore disabled apps by simply
starting them, at no additional purchase cost.
Proceed?" will be displayed. If you select Yes, the
app(s) will be disabled.
Get Info (Menu )
Gives you information about the Get It Now selection key.
1. Press Left Soft Key Menu.
2.Press Get It Now.
3.Select Get Info.
4.Press .
Managing Your Get It Now Applications
Add new applications and remove old ones at any time.
Disabling Applications
If you need more memory, but still want to be able to access
the application later, try using Disable. Disabling keeps the
application usage and purchase information, but removes it
from memory. Restore an application when needed.
1. Access Get It Now.
2. Select Settings.
68
VX4500
3. Use to highlight Manage Apps, then press .
VX4500
69
Page 36
Using Phone Menus
Using Phone Menus
4. Use to highlight the application to be disabled, then
press .
5. Select Disable.
Removing Applications
Only removing an application deletes it completely from the
memory of the phone. To restore an application once it has been
removed will require that you pay and download it again.
1. Access Get It Now.
2. Select Settings.
3. Use to highlight Manage Apps, then press .
4. Use to highlight the application to be deleted, then
press .
5. Select Remove.
Mobile Web (Menu )
The MiniBrowser feature allows you to view internet content,
via VZW with MSN, especially designed for your mobile phone.
Access and selections within this feature are dependent upon
your service provider. For specific information on MiniBrowser
access through your phone, contact your service provider.
Access and Options
1.Press Left Soft Key Menu.
2.Press Mobile Web.
●Start Browser
●Web Messages
●Alert Beep
70
VX4500
VX4500
71
Page 37
Using Phone Menus
Using Phone Menus
Start Browser (Menu )
Allows you to initiate a MiniBrowser session.
1. Press Left Soft Key Menu.
2.Press Mobile Web.
3.Press Start Browser.
4.A reminder of the charge will appear; press Yes to
launch MiniBrowser, if required.
After a few seconds, you see the Home Page.
Ending a MiniBrowser Session
End a MiniBrowser session by pressing .
Navigating Through the Browser
On-screen items may be presented in one of the following ways:
●
Numbered options
You can use your numeric keypad or you can select the
items by moving the cursor and pressing the appropriate
Soft Keys.
Links embedded in content
●
You can act on the options or the links by using the Soft
Keys just below the display screen.
Text or numbers
●
You can select the items by moving the cursor and pressing
the appropriate Soft Keys.
Scrolling
Use to scroll through the content if the current page does
not fit on one screen. The currently selected item is indicated by
a cursor on the screen.
Fast Scrolling
Press and hold to quickly move the cursor up and down
on the current screen.
Scrolling by Page
Press the Side Keys to move up and down a page at a time.
Home Page
To go to the Home Page, press and hold .
View Browser Menu
Press Voice Command ( ) Key to use the Browser Menu.
View Browser Alert Inbox
Press and hold key to use the Browser Alert Inbox.
Soft Keys
To navigate to different screens or select special functions, use
the Soft Keys. The function associated with the Soft Keys can
change for each page and depends on each highlighted item.
Left Soft Key
Left Soft Key is used primarily for first options or selecting
an item but its function may change, depending on the content
displayed.
Right Soft Key
Right Soft Keyis used primarily for secondary options or a
menu of secondary options.
72
VX4500
VX4500
73
Page 38
Using Phone Menus
Using Phone Menus
Entering Text, Numbers, or Symbols
When prompted to enter text, the current text entry method
appears above the Right Soft Keyas Alpha, Symbol,Number, Word. To change the input mode, press the Right
Soft Key.
To create an upper case character, use .
The current text method appears above the Right Soft Key
as ALPHA and allows you to shift input case sensitivity.
Clearing Out Text/Number Entered
When entering text or numbers, press to clear the last
number, letter or symbol. Press and hold to clear the input
field completely.
Initiating a Phone Call From Minibrowser
You can make a phone call from Minibrowser if the site you are
using supports the feature (the phone number may be
highlighted and Left Soft Key appears as Call).
The browser connection is terminated when you initiate the
call. After you end the call, your phone returns to the screen
from which you initiated the call.
Web Messages (Menu )
Allows you to view Web messages. If there are any browser
messages, the list is displayed from newest to oldest.
1.Press Left Soft Key Menu.
2.Press Mobile Web.
3.Press Web Messages.
A message
4.Press Yes .
Your list of Web messages is displayed.
Alert Beep (Menu )
Allows you to select a browser alert sound.
1.Press Left Soft Key Menu.
2.Press Mobile Web.
3.Press Alert Beep.
4.Select an alert option.
Mute / 2 Beeps / 4 Beeps
Charges will apply. Start MiniBrowser? is displayed.
74
VX4500
VX4500
75
Page 39
Using Phone Menus
Using Phone Menus
My Media (Menu )
This menu allows you to download and use a wide variety of
graphics, sounds, and more.
Access and Options
1.Press Left Soft Key Menu.
2.Press My Media.
3.Select a sub-menu.
●Graphics
●Music
●Message Objects
Graphics (Menu)
Allows you to choose the background displayed on the phone.
1.Press Left Soft Key Menu.
2.Press My Media.
3.Press Graphics.
4.Use to highlight your selection then press to select.
Music (Menu )
Allows you to choose the ring tones heard for incoming calls.
1.Press Left Soft Key Menu.
2.Press My Media.
3.Press Music.
4.Use to highlight your selection then press to select.
Message Objects (Menu )
Allows you to set objects to correspond with your messages.
1.Press Left Soft Key Menu.
2.Press My Media.
3.Press Message Objects.
4.Press the corresponding number key to select one of the
following:
[1] Small Pictures / [2] Large Pictures / [3] My Pictures
/ [4] Sounds / [5] My Melodies / [6] Animations /
[7] My Animations
5.Use to highlight your selection then press .
76
VX4500
VX4500
77
Page 40
Using Phone Menus
Using Phone Menus
Voice (Menu )
Voice Menu allows you to use your voice to activate certain
features of your phone such as the Memo and Driving Mode.
Access and Options
1.Press Left Soft Key Menu.
2.Press Voice.
3.Select a sub-menu.
●Start Commands
●Voice Memos
●Voice Settings
●Help
NOTE: For voice recognition, keep surrounding area quiet and
speak clearly.
NOTE: When entering names in your Contacts list, avoid symbols
other than letters (such as digits and punctuation marks).
Start Commands (Menu )
Allows you to use your voice or the keypad to activate certain
features of your phone.
1.Press Left Soft Key Menu.
2.Press Voice.
3.Press Start Commands.
1. Call Someone: Phone call is made by saying the
name, saved on the Contacts, based on List Contacts
search.
2. Voicemail: Connects to *86 and Voice Mail.
3. Digit Dial: Phone call is made by saying the telephone
number of 4, 7, 10 and 11 digits.
4. Service Alerts: Reads out the number of missed calls,
new Voice Mails, and new messages.
5. Missed Calls: Reads out the number of new missed
calls and the list of all missed calls.
6. Contact: Reads, creates, or erases the Contacts.
7. Driving: Switches the hands-free driving mode on and off.
8. Announce: Sets the Announce Mode On/Off.
9. Time and Date: Announces the time and date and
displays it on the phone.
10. Phone Status: Reads out the phone status.
NOTE: Pronounce phone numbers digit by digit. Do not say "1-800"
as "one eight hundred." Instead, say "One, eight, zero, zero."
78
VX4500
NOTE: Voice function is recognized only in English, but Spanish is
not supported. For instance, "San Jose" is not recognized
as [San Hose], Spanish pronunciation, but as [San Jose]
as in English.
VX4500
79
Page 41
Using Phone Menus
Using Phone Menus
To voice-dial a name from your Contacts list:
1. Flip open the phone, and press the Voice Command Key.
2. When prompted, say "Call Someone".
3. When prompted again, say a name from your Contacts list.
4. When asked to confirm, say "Yes". The phone dials the person's
number.
NOTE: You should select the phone label, if the phone numbers
are stored more than two.
To voice-dial a number:
1. Flip open the phone, and press the Voice Command Key.
2. When prompted, say "Digit Dial".
3. When prompted again, say a phone number.
4.
When asked to confirm, say "Yes" . The phone dials the number.
Voice Memos (Menu )
Allows you to listen to, add, and erase short verbal reminders.
1.Press Left Soft Key Menu.
2.Press Voice.
3.Press Voice Memos.
4.Press Left Soft Key New to record a new voice memo.
5.Use to highlight your desired Voice Memo and press
Right Soft Key Options.
Edit title / Memory info / Erase / Erase all
6. Follow the Voice Memo prompts. A confirmation message
is displayed.
Voice Settings (Menu )
Allows you to select options for voice activation, announce
alerts and recognition results; and enables you to adapt the
phone to recognize your way of saying numbers.
Voice Commands (Menu )
Allows you to set how you activate voice recognition.
1.Press Left Soft Key Menu.
2.Press Voice.
3.Press Voice Settings.
4.Press Voice Commands.
5.Select either of the following then press .
Flip open: Activates voice recognition whenever you flip
●
open the phone. (When the phone is already open, you
activate voice recognition by pressing the voice command
key.)
●
Side key only: Activates voice recognition when you flip
open the phone and press the voice command key.
(It operates as Flip open Mode, when set to Announce or
Driving Mode.)
Sound Modes (Menu )
Allows you to set Driving Mode/Announce/Normal Mode.
1.Press Left Soft Key Menu.
2.Press Voice.
3.Press Voice Settings.
4.Press Sound Modes.
5. Select Driving Mode / Announce Mode / Normal Mode
and press .
80
VX4500
VX4500
81
Page 42
Using Phone Menus
Using Phone Menus
When the Announce Mode is on, the highlighted menu will be announced.
For example,
1) Press Left Soft Key Menu.
2)
Main menu screen appears, phone announces “Main menu”.
3)
Then, phone announces the first menu item that is highlighted.
4) When the cursor is moved, the highlighted menu item is
announced.
5) Menu readout only to the first sub-level.
Announce Alerts (Menu )
Allows you to notify caller ID and sender of message by voice.
1.Press Left Soft Key Menu.
2.Press Voice.
3.Press Voice Settings.
4.Press Announce Alerts.
5.Select On / Off and press .
NOTE: When Announce Alerts is set, is displayed on the screen.
Best Match (Menu )
After you say a name or a number, your phone displays the
recognition results—the name or number that best matches the
one you said—and asks you to confirm. Select the number of
results that you want your phone to display.
1.Press Left Soft Key Menu.
2.Press Voice.
3.Press Voice Settings.
4.PressBest Match.
5.Select an option and press .
●1 Result: Displays the name or number that best
matches the one you said.
●4 Results: Displays the four names or numbers that
best match the one you said and asks you if the first
one is correct. If you say "Yes," the phone makes the
call. If you say "No," the phone suggests the second
one in the list, and so on, up to the fourth result.
Train Words (Menu )
Command Train is an optional personalization feature that helps
your phone recognize the way you pronounce commands. If
you do not get consistently good results with the commands,
perform this brief, one-time session.
Your phone tools include a Scheduler, Alarm Clock, Notepad,
EZ Tip Calculator, Calculator, and World Clock.
Access and Options
1.Press Left Soft Key Menu.
2.Press Tools.
3.Select a sub-menu.
●Alarm Clock
●Scheduler
●Notepad
●Ez Tip Calc
●Calculator
●World Clock
Alarm Clock (Menu )
Allows you to set one of four alarms. The current time is
displayed at the top of the screen when you select an alarm to
set. At the alarm time, Alarm 1 (or 2 or 3, as applicable) will be
displayed on the LCD screen and the alarm will sound.
1. Press Left Soft Key Menu.
2.Press Tools.
3.Press Alarm Clock.
4.Select the alarm you want to edit.
●
Alarm 1 / Alarm 2 / Alarm 3 / Quick Alarm
5.Use to highlight the alarm time then press .
6.Set the time for alarm and press Left Soft KeySave.
7.Use to highlight Once (recurring setting).
8.Press to select one of the following:
●
Once / Daily / Mon-Fri / Weekends
9.Use to highlight Ring (ring type setting) and press .
10. Use to select one of the available alarm ring types
and press .
11. Press Left Soft Key Save.
Scheduler (Menu )
Allows you to conveniently keep and access your agenda(s).
Simply store your appointments and your phone will alert you
with a reminder of your appointment.
1.Press Left Soft Key Menu.
2.Press Tools.
3.Press Scheduler.
4.Use to highlight the scheduled day.
84
VX4500
VX4500
85
Page 44
Using Phone Menus
Using Phone Menus
Moves cursor to the left.
Moves cursor to the right.
Moves to the previous week.
Moves to the next week.
5.Press Left Soft Key Add.
6.Enter your schedule information including:
●
Date
●
Time
●
Title/Information
●
Recurring event
●
When to ring the alarm reminder
●
Which ring alarm to sound
7.Press Left Soft Key Save.
NOTE: Scheduler will not alert you during a call or during SMS
transmitting. It will sound the reminder after you exit a call.
Notepad (Menu )
Allows you to read, add, edit, and erase notes to yourself.
1.Press Left Soft Key Menu.
2.Press Tools.
3.Press Notepad.
4.Press Left Soft Key Add to write a new note.
Ez Tip Calc (Menu )
Allows you to quickly and easily calculate the amounts for a bill
with the amount of the bill, the amount of the tip and the
number of people as variables.
1.Press Left Soft Key Menu.
2.Press Tools.
3.Press Ez Tip Calc.
Calculator (Menu )
Allows you to calculate simple mathematical computations. You
can enter numbers up to the second decimal place.
1.Press Left Soft Key Menu.
2.Press Tools.
3.Press Calculator.
NOTE: Calculations can be made with up to 32 characters at one
time (e.g., 63+78-21 would be 8 characters).
World Clock (Menu )
Allows you to determine the current time in another time zone
or country.
1.Press Left Soft Key Menu.
2.Press Tools.
3.Press World Clock.
NOTE: Press Left Soft Key Set DST to set DST.
86
VX4500
VX4500
87
Page 45
Using Phone Menus
Using Phone Menus
Settings (Menu )
The Setup menu has options to customize your phone.
Access and Options
1.Press Left Soft Key Menu.
2.Press Settings.
3.Select a sub-menu.
●Sounds
●Display
●System
●Security
●Call Setup
●1x Data
●Location
●Phone Info
Sounds (Menu )
Options to customize the phone’s sounds.
Ringers (Menu )
Sets ring tones for types of incoming calls.
1.Press Left Soft Key Menu.
2.Press Settings.
3.Press Sounds then press Ringers.
4.Select Caller ID / No Caller ID / Restrict.
5.Use to select a ringer then press to save the sound.
Key Tone (Menu )
Allows you to set the Key Tone length and touch tone playback
speed.
1.Press Left Soft Key Menu.
2.Press Settings.
3.Press Sounds then press Key Tone.
4.Select either of the following then press .
NormalSends out a tone for a fixed period of time even
if you keep the key pressed.
LongSends out a continuous tone for as long as you
keep the key pressed.
NOTE: Dual-Tone Multi Frequency (DTMF) Signaling by the
simultaneous transmission of two tones, one from a group
of low frequencies and another from a group of high
frequencies. Each group of frequencies consists of four
frequencies. Setting the Key Beep length to Long will extend
the DTMF tone.
● Dynamic / Red / Green / Blue / Ye ll ow / Magenta /
Cyan / Off
Contrast (Menu )
Allows you to set the level of contrast for your LCD screen.
1. Press Left Soft Key Menu.
2. Press Settings.
3. Press Display.
4. Press Contrast.
5. Choose a Contrast sub-menu and press .
Main LCD / Front LCD.
6. Use to adjust the contrast level.
94
VX4500
VX4500
95
Page 49
Using Phone Menus
Using Phone Menus
Fonts (Menu )
Allows you to set the size and color of the font.
1.Press Left Soft Key Menu.
2.Press Settings.
3.Press Display.
4.Press Fonts.
Calling Digits (Menu )
1.Select Size / Color.
2.Press until you find the size or color you desire
then press to save.
Text Editor (Menu )
1.Select Size / Color.
2.Press until you find the size or color you desire
then press to save.
Language (Menu )
Allows you to set the bilingual feature according to your
preference. Choose between English and Spanish.
1.Press Left Soft Key Menu.
2.Press Settings.
3.Press Display.
4.Press Language.
5.Set English / Spanish with then press .
System (Menu )
The System menu allows you to designate specific system
network settings.
Select System (Menu )
Allows you to set up the phone producer’s management
environment. Leave this setting as the default unless you want
to alter system selection as instructed by your service provider.
1.Press Left Soft Key Menu.
2.PressSettings.
3.Press System.
4.Press Select System.
5.Select Home Only / Automatic then press .
Set NAM (Menu )
Allows you to select the phone’s NAM (Number Assignment
Module) if the phone is registered with multiple service
providers.
1.Press Left Soft Key Menu.
2.PressSettings.
3.Press System.
4.Press Set NAM.
5.Select NAM1 / NAM2 then press .
96
VX4500
VX4500
97
Page 50
Using Phone Menus
Using Phone Menus
Auto NAM (Menu )
Allows the phone to automatically switch between
programmed telephone numbers corresponding to the service
provider area.
1.Press Left Soft Key Menu.
2.Press Settings.
3.Press System.
4.Press Auto NAM.
5.Select On / Off then press .
Serving System (Menu )
Identifies the channel number of a system that is served and a
SID Number. This information is only for technical support.
1.Press Left Soft Key Menu.
2.Press Settings.
3.Press System.
4.Press Serving System.
Security (Menu )
The Security menu allows you to secure the phone electronically.
Lock Phone (Menu )
Keeps your phone from unauthorized use. Once the phone is
locked, it is in restricted mode until the lock code is entered.
You can receive phone calls and still make emergency calls.
You can modify the lock code using the New Lock code within
the Security menu.
1.Press Left Soft Key Menu.
2.Press Settings.
3.Press Security.
4.Enter the four-digit lock code.
The lock code is commonly the last 4 digits of your phone
number.
5.Press Lock Phone.
6.Select an option then press .
UnlockThe phone is never locked (Lock mode
can be used).
LockThe phone is always locked.
When locked, you can receive incoming
calls or make only emergency calls.
On Power UpThe phone is locked when it is turned on.
98
VX4500
VX4500
99
Page 51
Using Phone Menus
Using Phone Menus
Restrict (Menu )
Allows you to restrict outgoing calls. If you set this feature to On,
you can only place calls to emergency numbers and phone
numbers stored in your Contacts. You can still receive calls in the
restrict mode.
1.Press Left Soft Key Menu.
2.Press Settings.
3.Press Security.
4.Enter the four-digit lock code.
5.Press Restrict.
6.Select On / Off then press .
Emergency #s (Menu )
Allows you to enter 3 emergency numbers You can call these
emergency numbers and 911, even when the phone is locked
or restricted.
1.Press Left Soft Key Menu.
2.Press Settings.
3.Press Security.
4.Enter the four-digit lock code.
5.Press Emergency #s.
6.Select an emergency number using .
7.Enter an emergency phone number then press .
Change Code (Menu )
Allows you to enter a new four-digit lock code.
1.Press Left Soft Key Menu.
2.PressSettings.
3.PressSecurity.
4.Enter the four-digit lock code.
5.PressChange Code.
6.For confirmation, it will ask you to enter the new lock code
again.
Erase Contacts (Menu )
Allows you to erase all of your Contacts at once.
1.Press Left Soft Key Menu.
2.Press Settings.
3.PressSecurity.
4.Enter the four-digit lock code.
5.PressErase Contacts.
6.Select Erase all #s then press .
100
VX4500
VX4500
101
Page 52
Using Phone Menus
Using Phone Menus
Reset Default (Menu )
Allows you to reset your phone to the factory default settings.
1.Press Left Soft Key Menu.
2.Press Settings.
3.PressSecurity.
4.Enter the four-digit lock code.
5.Press Reset Default.
6.Press , select Revert then press .
Call Setup (Menu )
The Call Setup menu allows you to designate how the phone
handles both incoming and outgoing calls.
Auto Retry (Menu )
Allows you to set the length of time the phone waits before
automatically redialing a number when the attempted call fails.
1.Press Left Soft Key Menu.
2.Press Settings.
3.Press Call Setup.
4.PressAuto Retry.
5.Select Off / Every 10 seconds / Every 30 seconds /
Every 60 seconds then press .
Answer Call (Menu )
Allows you to determine how to initiate an answered call.
1.Press Left Soft Key Menu.
2.Press Settings.
3.Press Call Setup.
4.Press Answer Call.
5.Select Flip Open / Any Key / SEND Only then press .
Auto-Answer (Menu )
Allows you to select the number of rings before the phone
automatically answers a call. This feature is intended for use
with hands free devices, but is an independent feature of the
phone and must be manually turned on/off when connected or
disconnected from the device.
1.Press Left Soft Key Menu.
2.Press Settings.
3.Press Call Setup.
4.Press Auto-Answer.
5.Select an option then press .
●Off
●After 1 ring When you have an incoming call, the phone
automatically responds after 1 ring.
●After 3 rings When you have an incoming call, the phone
automatically responds after 3 rings.
102
VX4500
VX4500
103
Page 53
Using Phone Menus
Using Phone Menus
One-Touch Dial (Menu )
Allows you to initiate a speed dial call by pressing and holding
the speed dial digit. If set to Disable, Speed Dial numbers
designated in your Contacts will not function.
1.Press Left Soft Key Menu.
2.Press Settings.
3.Press Call Setup.
4.Press One-Touch Dial.
5.Select Enable / Disable then press .
Voice Privacy (Menu )
Allows you to set the voice privacy feature for CDMA calls as
Enhanced or Standard. CDMA offers inherent voice privacy.
Check with your service provider for availability.
1.Press Left Soft Key Menu.
2.Press Settings.
3.Press Call Setup.
4.Press Voice Privacy.
5.Select Enhanced / Standard then press .
Auto Volume (Menu )
Provides a better audio experience by enabling the Auto
Volume feature to control the dynamic range and volume of the
sending and receiving voice across different levels of speaker
and environments.
1.Press Left Soft Key Menu.
2.PressSettings.
3.Press Call Setup.
4.Press Auto Volume.
5.Select On / Off then press .
TTY Mode (Menu )
Allows you to attach a TTY device enabling you to
communicate with parties also using a TTY device. A phone
with TTY support is able to translate typed characters to voice.
Voice can also be translated into characters and then displayed
on the TTY.
1.Press Left Soft Key Menu.
2.Press Settings.
3.Press Call Setup.
4.Press TTY Mode.
5.Select TTY Full / TTY+TALK / TTY+HEAR / TTY Off then
press .
104
VX4500
VX4500
105
Page 54
Using Phone Menus
Using Phone Menus
1x Data (Menu )
This menu allows you to use wireless data communication
services. Wireless data communication services refers to the
utilization of subscriber terminals for access to the internet with
personal computers or laptops at 19.2 Kbps or at a maximum
of 230.4 Kbps. The connection speed depends on your carrier’s
network and other variables. Contact communication
information specifications must match the network.
Data/Fax (Menu )
Allows you to use your phone to transmit data and faxes.
1.Press Left Soft Key Menu.
2.Press Settings.
3.Press 1x Data.
4.Press Data/ Fax.
5.Select Off / Fax In Once / Fax In Always / Data In Once
/ Data In Always then press .
NOTE: The Data Connection Kit allows you to connect your PC or
PDA to your LG wireless phone, freeing you from having to
locate a telephone outlet. You can send or receive an e-mail,
a fax, or access the Internet anytime, anywhere.
Select Port (Menu )
Allows you to select the data port.
1.Press Left Soft Key Menu.
2.Press Settings.
3.Press 1x Data.
4.Press Select Port.
5.Select RS-232C(COM Port) / Closed then press .
Port Speed (Menu )
Allows you to set the port speed. Set the port speed based on
your carrier’s network. Contact your carrier to determine the
maximum available speed.
1.Press Left Soft Key Menu.
2.Press Settings.
3.Press 1x Data.
4.Press Port Speed.
5.Select 19200 / 115200 / 230400 then press .
NOTE: When using the 1X HSPD data service via an RS-232C data
cable, the port speed is set to 115,200 (230,400 is not
supported). When using the 1X HSPD data service via a
USB data cable, you may get better port speed if the port
speed is set to 230,400 rather than 115,200.
106
VX4500
VX4500
107
Page 55
Using Phone Menus
Using Phone Menus
Location (Menu )
Menu for GPS (Global Positioning System: Satellite assisted
location information system) mode.
1.Press Left Soft Key Menu.
2.Press Settings.
3.Press Location.
4.Select Location On / E911 Only then press .
NOTE: GPS satellite signals are not always transmitted,
especially under bad atmospheric and environmental
conditions, indoors or otherwise.
Phone Info (Menu )
The Phone Info menu provides you with specific information
pertaining to your phone model.
My Phone Number (Menu )
Allows you to view your phone number.
1.Press Left Soft Key Menu.
2.Press Settings.
3.Press Phone Info.
4.Press My Phone Number.
S/W Version (Menu )
Allows you to view the software, PRL, ERI, and browser version.
1.Press Left Soft Key Menu.
2.Press Settings.
3.Press Phone Info.
4.Press S/W Version.
Icon Glossary (Menu )
Allows you to view all the icons and their meanings.
1.Press Left Soft Key Menu.
2.Press Settings.
3.Press Phone Info.
4.Press Icon Glossary.
Shortcut Help (Menu )
Allows you to view condensed information about using the
phone.
1.Press Left Soft Key Menu.
2.Press Settings.
3.Press Phone Info.
4.Press Shortcut Help.
● From the Standby screen, press .
108
VX4500
VX4500
109
Page 56
Safety
Safety
TIA Safety Information
The following is the complete TIA Safety Information for wireless
handheld phones.
Exposure to Radio Frequency Signal
Your wireless handheld portable phone is a low power radio
transmitter and receiver. When it is ON, it receives and also
sends out radio frequency (RF) signals.
In August, 1996, the Federal Communications Commissions
(FCC) adopted RF exposure guidelines with safety levels for
handheld wireless phones. Those guidelines are consistent with
the safety standards previously set by both U.S. and
international standards bodies:
American National Standards Institute; National Council on
Radiation Protection and Measurements; International
Commission on Non-Ionizing Radiation Protection
Those standards were based on comprehensive and periodic
evaluations of the relevant scientific literature. For example, over
120 scientists, engineers, and physicians from universities,
government health agencies, and industry reviewed the
available body of research to develop the ANSI Standard (C95.1).
The design of your phone complies with the FCC guidelines (and
those standards).
Antenna Care
Use only the supplied or an approved replacement antenna.
Unauthorized antennas, modifications, or attachments could
damage the phone and may violate FCC regulations.
Phone Operation
NORMAL POSITION: Hold the phone as you would any other
telephone with the antenna pointed up and over your shoulder.
Tips on Efficient Operation
For your phone to operate most efficiently:
Do not touch the antenna unnecessarily when the phone is in use.
Contact with the antenna affects call quality and may cause the
phone to operate at a higher power level than otherwise needed.
Driving
Check the laws and regulations on the use of wireless phones
in the areas where you drive and always obey them. Also, if
using your phone while driving, please observe the following:
●Give full attention to driving -- driving safely is your first
responsibility;
●Use hands-free operation, if available;
●Pull off the road and park before making or answering a
call if driving conditions or the law so require.
Electronic Devices
Most modern electronic equipment is shielded from RF signals.
However, certain electronic equipment may not be shielded
against the RF signals from your wireless phone.
Pacemakers
The Health Industry Manufacturers Association recommends
that a minimum separation of six (6) inches be maintained
between a handheld wireless phone and a pacemaker to avoid
potential interference with the pacemaker. These
recommendations are consistent with the independent research
by and recommendations of Wireless Technology Research.
110
VX4500
VX4500
111
Page 57
Safety
Safety
Persons with pacemakers:
• Should ALWAYS keep the phone more than six (6) inches
from their pacemaker when the phone is turned ON;
• Should not carry the phone in a breast pocket;
• Should use the ear opposite the pacemaker to minimize the
potential for interference;
• Should turn the phone OFF immediately if there is any reason
to suspect that interference is taking place.
Hearing Aids
Some digital wireless phones may interfere with some hearing
aids. In the event of such interference, you may want to consult
your service provider (or call the customer service line to
discuss alternatives.) Optional for each phone manufacturer.
Other Medical Devices
If you use any other personal medical device, consult the
manufacturer of your device to determine if it is adequately
shielded from external RF energy. Your physician may be able
to assist you in obtaining this information.
Health Care Facilities
Tu rn your phone OFF in health care facilities when any regulations
posted in these areas instruct you to do so. Hospitals or health
care facilities may use equipment that could be sensitive to
external RF energy.
Posted Facilities
Tu rn your phone OFF in any facility where posted notices so
require.
Aircraft
FCC regulations prohibit using your phone while in the air.
Switch OFF your phone before boarding an aircraft.
Blasting Areas
To avoid interfering with blasting operations, turn your phone
OFF when in a “blasting area” or in areas posted: “Turn off
two-way radio”. Obey all signs and instructions.
Potentially Explosive Atmosphere
Tu rn your phone OFF when in any area with a potentially
explosive atmosphere and obey all signs and instructions.
Sparks in such areas could cause an explosion or fire resulting
in bodily injury or even death.
Areas with a potentially explosive atmosphere are often, but
not always marked clearly. Potential areas may include: fueling
areas (such as gasoline stations); below deck on boats; fuel or
chemical transfer or storage facilities; vehicles using liquefied
petroleum gas (such as propane or butane); areas where the air
contains chemicals or particles (such as grain, dust, or metal
powders) and any other area where you would normally be
advised to turn off your vehicle engine.
Vehicles
RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles. Check with the
manufacturer or its representative regarding your vehicle. You
should also consult the manufacturer of any equipment that
has been added to your vehicle.
112
VX4500
For Vehicles Equipped with an Air Bag
An air bag inflates with great force. DO NOT place objects,
including either installed or portable wireless equipment, in the
area over the air bag or in the air bag deployment area. If invehicle wireless equipment is improperly installed and the air
bag inflates, serious injury could result.
VX4500
113
Page 58
Safety
Safety
Charger and Adapter Safety
●The charger and adapter are intended for indoor use only.
●Do not expose the battery charger or adapter to direct
sunlight or use it in places with high humidity, such as a
bathroom.
Battery Information and Care
●Please dispose of your battery properly or take it to your
local wireless carrier for recycling.
●Do not dispose of your battery in fire or with hazardous or
flammable materials.
●Never store your phone in temperatures less than -4° F or
greater than 122° F.
●Never use an unapproved battery since this could damage
the phone and/or battery and could cause the battery to
explode.
●The battery does not need to be fully discharged before
recharging.
●Use only LG-approved chargers specific to your phone
model since they are designed to maximize battery life.
●Do not disassemble or short-circuit the battery.
●Keep the battery’s metal contacts clean.
●Replace the battery when it no longer provides acceptable
performance. The battery can be recharged several
hundred times before replacement.
●Recharge the battery after long periods of non-use to
maximize battery life.
●Battery life will vary due to usage patterns and environmental
conditions.
●Use of extended backlighting, MiniBrowser, and data
connectivity kits affect battery life and talk/standby times.
Safety Information
Please read and observe the following information for safe and
proper use of your phone and to prevent damage. Also, keep
the user’s guide in an accessible place at all the times after
reading it.
Explosion, Shock, and Fire Hazards
●Make sure that no sharp-edged items such as animal’s
teeth, nails, come into contact with the battery. There is a
risk of this causing a fire.
●Do not use harsh chemicals(such as alcohol, benzene,
thinners, etc.) or detergents to clean your phone. There is a
risk of this causing a fire.
●When riding in a car, do not leave your phone or set up the
hands-free kit near to the air bag. If wireless equipment is
improperly installed and the air bag is activated, you may
be seriously injured.
●Do not handle the phone with wet hands while it is being
charged. It may cause an electric shock or seriously
damage your phone.
●Do not drop, strike, or shake your phone severely. Such
actions may harm the internal circuit boards of the phone.
●Be careful that children do not swallow any parts such as
rubber plugs (earphone, connection parts of the phone,
etc.). This could cause asphyxiation or suffocation.
●Do not use your phone in high explosive areas as the
phone may generate sparks.
●Do not put your phone in a place subject to excessive dust
and keep the minimum required distance between the
power cord and heat sources.
●Unplug the power cord prior to cleaning your phone, and
clean the power plug pin when it is dirty.
114
VX4500
VX4500
115
Page 59
Safety
Safety
●Do not damage the power cord by bending, twisting,
pulling, or heating. Do not use the plug if it is loose as it
may cause a fire or electric shock.
●When using the power plug, ensure that it is firmly
connected. If it is not, it may cause excessive heat or fire.
●Do not place any heavy items on the power cord. Do not
allow the power cord to be crimped as it may cause fire or
electric shock.
●Do not disassemble the phone.
●Do not place or answer calls while charging the phone as it
may short-circuit the phone and/or cause electric shock or
fire.
●If you put your phone in a pocket or bag without covering
the receptacle of the phone (power plug pin), metallic
articles (such as a coin, paperclip or pen) may short-circuit
the phone. Always cover the receptacle when not in use.
●Do not short-circuit the battery. Metallic articles such as a
coin, paperclip or pen in your pocket or bag may shortcircuit the + and – terminals of the battery (metal strips on
the battery) upon moving. Short-circuit of the terminal may
damage the battery and cause an explosion.
●Never place your phone in a microwave oven as it will
cause the battery to explode.
General Warnings and Cautions
●Only use the batteries, antennas, and chargers provided by
LG. The warranty will not be applied to products provided
by other suppliers.
●Store the battery in a place out of reach of children.
●Using a damaged battery or placing a battery in your
mouth may cause serious injury.
●Do not place items containing magnetic components such
as a credit card, phone card, bank book or subway ticket
near your phone. The magnetism of the phone may
damage the data stored in the magnetic strip.
●Do not hold or let the antenna come in contact with your
body during a call.
●Ta lking on your phone for a long period of time may
reduce call quality due to heat generated during use.
●When the phone is not used for a long period time, store it
in a safe place with the power cord unplugged.
●Using the phone in proximity to receiving equipment (i.e.,
TV or radio) may cause interference to the phone.
●Only authorized personnel should service the phone and
its accessories. Faulty installation or service may result in
accidents and consequently invalidate the warranty.
●Do not use the phone if the antenna is damaged. If a
damaged antenna contacts skin, it may cause a slight burn.
Please contact an LG Authorized Service Center to replace
the damaged antenna.
●Do not use the phone in areas where its use is prohibited.
(For example: aircraft).
●Do not immerse your phone in water. If this happens, turn
it off immediately and remove the battery. If the phone
does not work, take it to an LG Authorized Service Center.
●The power cord on this product will expose you to lead, a
chemical known to the State of California to cause (cancer,
and) birth defects or other reproductive harm. Wash hands
after handling.
116
VX4500
VX4500
117
Page 60
Safety
Safety
FDA Consumer Update
The U.S. Food and Drug Administration’s Center for Devices
and Radiological Health Consumer Update on Mobile Phones:
1. Do wireless phones pose a health hazard?
The available scientific evidence does not show that any health
problems are associated with using wireless phones. There is
no proof, however, that wireless phones are absolutely safe.
Wireless phones emit low levels of radiofrequency energy (RF)
in the microwave range while being used. They also emit very
low levels of RF when in the standby mode. Whereas high
levels of RF can produce health effects (by heating tissue),
exposure to low level RF that does not produce heating effects
causes no known adverse health effects. Many studies of low
level RF exposures have not found any biological effects. Some
studies have suggested that some biological effects may occur,
but such findings have not been confirmed by additional
research. In some cases, other researchers have had difficulty in
reproducing those studies, or in determining the reasons for
inconsistent results.
2. What is the FDA's role concerning the safety of wireless
phones?
Under the law, the FDA does not review the safety of radiationemitting consumer products such as wireless phones before
they can be sold, as it does with new drugs or medical devices.
However, the agency has authority to take action if wireless
phones are shown to emit radiofrequency energy (RF) at a level
that is hazardous to the user. In such a case, the FDA could
require the manufacturers of wireless phones to notify users of
the health hazard and to repair, replace, or recall the phones so
that the hazard no longer exists.
Although the existing scientific data do not justify FDA
regulatory actions, the FDA has urged the wireless phone
industry to take a number of steps, including the following:
●Support needed research into possible biological effects of
RF of the type emitted by wireless phones;
●Design wireless phones in a way that minimizes any RF
exposure to the user that is not necessary for device
function; and
●Cooperate in providing users of wireless phones with the
best possible information on possible effects of wireless
phone use on human health.
The FDA belongs to an interagency working group of the
federal agencies that have responsibility for different aspects of
RF safety to ensure coordinated efforts at the federal level. The
following agencies belong to this working group:
●National Institute for Occupational Safety and Health
●Environmental Protection Agency
●Occupational Safety and Health Administration
●National Telecommunications and Information Administration
The National Institutes of Health participates in some
interagency working group activities, as well.
The FDA shares regulatory responsibilities for wireless phones
with the Federal Communications Commission (FCC). All
phones that are sold in the United States must comply with
FCC safety guidelines that limit RF exposure. The FCC relies on
the FDA and other health agencies for safety questions about
wireless phones.
The FCC also regulates the base stations that the wireless
phone networks rely upon. While these base stations operate at
higher power than do the wireless phones themselves, the RF
exposures that people get from these base stations are typically
thousands of times lower than those they can get from wireless
phones. Base stations are thus not the subject of the safety
questions discussed in this document.
118
VX4500
VX4500
119
Page 61
Safety
Safety
3.What kinds of phones are the subject of this update?
The term “wireless phone” refers here to handheld wireless
phones with built-in antennas, often called “cell”, “mobile”, or
“PCS” phones. These types of wireless phones can expose the
user to measurable radiofrequency energy (RF) because of the
short distance between the phone and the user’s head.
These RF exposures are limited by FCC safety guidelines that
were developed with the advice of the FDA and other federal
health and safety agencies. When the phone is located at
greater distances from the user, the exposure to RF is drastically
lower because a person's RF exposure decreases rapidly with
increasing distance from the source. The so-called “cordless
phones,” which have a base unit connected to the telephone
wiring in a house, typically operate at far lower power levels,
and thus produce RF exposures far below the FCC safety limits.
4.What are the results of the research done already?
The research done thus far has produced conflicting results,
and many studies have suffered from flaws in their research
methods. Animal experiments investigating the effects of
radiofrequency energy (RF) exposures characteristic of wireless
phones have yielded conflicting results that often cannot be
repeated in other laboratories. A few animal studies, however,
have suggested that low levels of RF could accelerate the
development of cancer in laboratory animals. However, many
of the studies that showed increased tumor development used
animals that had been genetically engineered or treated with
cancer-causing chemicals so as to be pre-disposed to develop
cancer in the absence of RF exposure. Other studies exposed
the animals to RF for up to 22 hours per day. These conditions
are not similar to the conditions under which people use
wireless phones, so we don’t know with certainty what the
results of such studies mean for human health.
Three large epidemiology studies have been published since
December 2000. Between them, the studies investigated any
possible association between the use of wireless phones and
primary brain cancer, glioma, meningioma, or acoustic
neuroma, tumors of the brain or salivary gland, leukemia, or
other cancers. None of the studies demonstrated the existence
of any harmful health effects from wireless phone RF
exposures. However, none of the studies can answer questions
about long-term exposures, since the average period of phone
use in these studies was around three years.
5.What research is needed to decide whether RF exposure
from wireless phones poses a health risk?
A combination of laboratory studies and epidemiological
studies of people actually using wireless phones would provide
some of the data that are needed. Lifetime animal exposure
studies could be completed in a few years. However, very large
numbers of animals would be needed to provide reliable proof
of a cancer promoting effect if one exists. Epidemiological
studies can provide data that is directly applicable to human
populations, but 10 or more years follow-up may be needed to
provide answers about some health effects, such as cancer.
This is because the interval between the time of exposure to a
cancer-causing agent and the time tumors develop — if they do
— may be many, many years. The interpretation of
epidemiological studies is hampered by difficulties in measuring
actual RF exposure during day-to-day use of wireless phones.
Many factors affect this measurement, such as the angle at
which the phone is held, or which model of phone is used.
6.What is the FDA doing to find out more about the possible
health effects of wireless phone RF?
The FDA is working with the U.S. National Toxicology Program
and with groups of investigators around the world to ensure
that high priority animal studies are conducted to address
important questions about the effects of exposure to radio
frequency energy (RF).
120
VX4500
VX4500
121
Page 62
Safety
Safety
The FDA has been a leading participant in the World Health
Organization International Electromagnetic Fields (EMF) Project
since its inception in 1996. An influential result of this work has
been the development of a detailed agenda of research needs
that has driven the establishment of new research programs
around the world. The project has also helped develop a series
of public information documents on EMF issues.
The FDA and the Cellular Telecommunications & Internet
Association (CTIA) have a formal Cooperative Research and
Development Agreement (CRADA) to do research on wireless
phone safety. The FDA provides the scientific oversight,
obtaining input from experts in government, industry, and
academic organizations. CTIA-funded research is conducted
through contracts with independent investigators. The initial
research will include both laboratory studies and studies of
wireless phone users. The CRADA will also include a broad
assessment of additional research needs in the context of the
latest research developments around the world.
7.How can I find out how much radio frequency energy
exposure I can get by using my wireless phone?
All phones sold in the United States must comply with Federal
Communications Commission (FCC) guidelines that limit radio
frequency energy (RF) exposures. The FCC established these
guidelines in consultation with the FDA and the other federal
health and safety agencies. The FCC limit for RF exposure from
wireless telephones is set at a Specific Absorption Rate (SAR) of
1.6 watts per kilogram (1.6 W/kg). The FCC limit is consistent
with the safety standards developed by the Institute of Electrical
and Electronic Engineering (IEEE) and the National Council on
Radiation Protection and Measurement. The exposure limit
takes into consideration the body’s ability to remove heat from
the tissues that absorb energy from the wireless phone and is
set well below levels known to have effects. Manufacturers of
wireless phones must report the RF exposure level for each
model of phone to the FCC. The FCC website
(http://www.fcc.gov/oet/ rfsafety) gives directions for locating
the FCC identification number on your phone so you can find
your phone’s RF exposure level in the online listing.
8.What has the FDA done to measure the radio frequency
energy coming from wireless phones?
The Institute of Electrical and Electronic Engineers (IEEE) is
developing a technical standard for measuring the radio
frequency energy (RF) exposure from wireless phones and
other wireless handsets with the participation and leadership of
FDA scientists and engineers. The standard, “Recommended
Practice for Determining the Spatial-Peak Specific Absorption
Rate (SAR) in the Human Body Due to Wireless
Communications Devices: Experimental Techniques,” sets forth
the first consistent test methodology for measuring the rate at
which RF is deposited in the heads of wireless phone users.
The test method uses a tissue-simulating model of the human
head. Standardized SAR test methodology is expected to
greatly improve the consistency of measurements made at
different laboratories on the same phone. SAR is the
measurement of the amount of energy absorbed in tissue,
either by the whole body or a small part of the body. It is
measured in watts/kg (or milliwatts/g) of matter. This
measurement is used to determine whether a wireless phone
complies with safety guidelines.
9.What steps can I take to reduce my exposure to radio
frequency energy from my wireless phone?
If there is a risk from these products — and at this point we do
not know that there is — it is probably very small. But if you are
concerned about avoiding even potential risks, you can take a
few simple steps to minimize your exposure to radio frequency
energy (RF). Since time is a key factor in how much exposure a
person receives, reducing the amount of time spent using a
wireless phone will reduce RF exposure.
122
VX4500
VX4500
123
Page 63
Safety
Safety
If you must conduct extended conversations by wireless phone
every day, you could place more distance between your body
and the source of the RF, since the exposure level drops off
dramatically with distance. For example, you could use a
headset and carry the wireless phone away from your body or
use a wireless phone connected to a remote antenna.
Again, the scientific data do not demonstrate that wireless
phones are harmful. But if you are concerned about the RF
exposure from these products, you can use measures like those
described above to reduce your RF exposure from wireless
phone use.
10. What about children using wireless phones?
The scientific evidence does not show a danger to users of
wireless phones, including children and teenagers. If you want
to take steps to lower exposure to radio frequency energy (RF),
the measures described above would apply to children and
teenagers using wireless phones. Reducing the time of wireless
phone use and increasing the distance between the user and
the RF source will reduce RF exposure.
Some groups sponsored by other national governments have
advised that children be discouraged from using wireless
phones at all. For example, the government in the United
Kingdom distributed leaflets containing such a
recommendation in December 2000. They noted that no
evidence exists that using a wireless phone causes brain
tumors or other ill effects. Their recommendation to limit
wireless phone use by children was strictly precautionary; it was
not based on scientific evidence that any health hazard exists.
11. What about wireless phone interference with medical
equipment?
Radio frequency energy (RF) from wireless phones can interact
with some electronic devices. For this reason, the FDA helped
develop a detailed test method to measure electromagnetic
interference (EMI) of implanted cardiac pacemakers and
defibrillators from wireless telephones. This test method is now
part of a standard sponsored by the Association for the
Advancement of Medical instrumentation (AAMI). The final
draft, a joint effort by the FDA, medical device manufacturers,
and many other groups, was completed in late 2000. This
standard will allow manufacturers to ensure that cardiac
pacemakers and defibrillators are safe from wireless phone
EMI. The FDA has tested hearing aids for interference from
handheld wireless phones and helped develop a voluntary
standard sponsored by the Institute of Electrical and Electronic
Engineers (IEEE). This standard specifies test methods and
performance requirements for hearing aids and wireless
phones so that no interference occurs when a person uses a
“compatible” phone and a “compatible” hearing aid at the
same time. This standard was approved by the IEEE in 2000.
The FDA continues to monitor the use of wireless phones for
possible interactions with other medical devices. Should harmful
interference be found to occur, the FDA will conduct testing to
assess the interference and work to resolve the problem.
12. Where can I find additional information?
For additional information, please refer to the following resources:
FDA web page on wireless phones
(http://www.fda.gov/cdrh/phones/index.html)
Federal Communications Commission (FCC) RF Safety Program
(http://www.fcc.gov/oet/rfsafety)
International Commission on Non-lonizing Radiation Protection
(http://www.icnirp.de)
World Health Organization (WHO) International EMF Project
(http://www.who.int/emf)
National Radiological Protection Board (UK)
(http://www.nrpb.org.uk/)
124
VX4500
VX4500
125
Page 64
Safety
Safety
Consumer Information on SAR
(Specific Absorption Rate)
This Model Phone Meets the Government’s Requirements for
Exposure to Radio Waves. Your wireless phone is a radio
transmitter and receiver. It is designed and manufactured not to
exceed the emission limits for exposure to radio frequency (RF)
energy set by the Federal Communications Commission of the
U.S. Government. These limits are part of comprehensive
guidelines and establish permitted levels of RF energy for the
general population. The guidelines are based on standards that
were developed by independent scientific organizations
through periodic and thorough evaluation of scientific studies.
The standards include a substantial safety margin designed to
assure the safety of all persons, regardless of age and health.
The exposure standard for wireless mobile phones employs a
unit of measurement known as the Specific Absorption Rate, or
SAR. The SAR limit set by the FCC is 1.6 W/kg. Tests for SAR
are conducted using standard operating positions specified by
the FCC with the phone transmitting at its highest certified
power level in all tested frequency bands. Although SAR is
determined at the highest certified power level, the actual SAR
level of the phone while operating can be well below the
maximum value. Because the phone is designed to operate at
multiple power levels to use only the power required to reach
the network, in general, the closer you are to a wireless base
station antenna, the lower the power output.
Before a phone model is available for sale to the public, it must
be tested and certified to the FCC that it does not exceed the
limit established by the government-adopted requirement for
safe exposure. The tests are performed in positions and
locations (e.g., at the ear and worn on the body) as required by
the FCC for each model. The highest SAR value for this model
phone when tested for use at the ear is 1.17 W/kg and when
worn on the body, as described in this user guide, is 0.914 W/kg
(body-worn measurements differ among phone models,
depending upon available accessories and FCC requirements).
While there may be differences between SAR levels of various
phones and at various positions, they all meet the government
requirement for safe exposure.
The FCC has granted an Equipment Authorization for this
model phone with all reported SAR levels evaluated as in
compliance with the FCC RF emission guidelines. SAR
information on this model phone is on file with the FCC and can
be found under the Display Grant section of
http://www.fcc.gov/oet/fccid after searching on FCC ID
BEJVX4500. Additional information on Specific Absorption
Rates (SAR) can be found on the Cellular Telecommunications
Industry Association (CTIA) website at http://www.wowcom.com.
* In the United States and Canada, the SAR limit for mobile
phones used by the public is 1.6 watts/kg (W/kg) averaged over
one gram of tissue. The standard incorporates a substantial
margin of safety to give additional protection for the public and
to account for any variations in measurements.
126
VX4500
VX4500
127
Page 65
Safety
Safety
10 Driver Safety Tips
Your wireless phone gives you the powerful ability to
communicate by voice almost anywhere, anytime. An
important responsibility accompanies the benefits of wireless
phones, one that every user must uphold.
When operating a car, driving is your first responsibility. When
using your wireless phone behind the wheel of a car, practice
good common sense and remember the following tips:
1. Get to know your wireless phone and its features such as
speed dial and redial. Carefully read your instruction manual
and learn to take advantage of valuable features most
phones offer, including automatic redial and memory. Also,
work to memorize the phone keypad so you can use the
speed dial function without taking your attention off the
road.
2. When available, use a hands-free device. A number of
hands-free wireless phone accessories are readily available
today. Whether you choose an installed mounted device for
your wireless phone or a speaker phone accessory, take
advantage of these devices if available to you.
3. Position your wireless phone within easy reach. Make sure
you place your wireless phone within easy reach and where
you can reach it without removing your eyes from the road.
If you get an incoming call at an inconvenient time, if
possible, let your voicemail answer it for you.
4. Suspend conversations during hazardous driving conditions
or situations. Let the person you are speaking with know
you are driving; if necessary, suspend the call in heavy
traffic or hazardous weather conditions. Rain, sleet, snow
and ice can be hazardous, but so is heavy traffic. As a driver,
your first responsibility is to pay attention to the road.
5. Do not take notes or look up phone numbers while driving. If
you are reading an address book or business card, or
writing a “to-do” list while driving a car, you are not
watching where you are going. It is common sense. Don’t
get caught in a dangerous situation because you are
reading or writing and not paying attention to the road or
nearby vehicles.
6. Dial sensibly and assess the traffic; if possible, place calls
when you are not moving or before pulling into traffic. Try
to plan your calls before you begin your trip or attempt to
coincide your calls with times you may be stopped at a stop
sign, red light or otherwise stationary. But if you need to dial
while driving, follow this simple tip -- dial only a few
numbers, check the road and your mirrors, then continue.
7. Do not engage in stressful or emotional conversations that
may be distracting. Stressful or emotional conversations
and driving do not mix; they are distracting and even
dangerous when you are behind the wheel of a car. Make
people you are talking with aware you are driving and if
necessary, suspend conversations which have the potential
to divert your attention from the road.
8. Use your wireless phone to call for help. Your wireless
phone is one of the greatest tools you can own to protect
yourself and your family in dangerous situations -- with
your phone at your side, help is only three numbers away.
Dial 911 or other local emergency number in the case of fire,
traffic accident, road hazard or medical emergency.
Remember, it is a free call on your wireless phone!
9. Use your wireless phone to help others in emergencies.
Your wireless phone provides you a perfect opportunity to
be a “Good Samaritan” in your community. If you see an
auto accident, crime in progress or other serious emergency
128
VX4500
VX4500
129
Page 66
Safety
Safety
Accessories
Accessories
where lives are in danger, call 911 or other local emergency
number, as you would want others to do for you.
10. Call roadside assistance or a special wireless nonemergency assistance number when necessary. Certain
situations you encounter while driving may require
attention, but are not urgent enough to merit a call for
emergency services. But you can still use your wireless
phone to lend a hand. If you see a broken-down vehicle
posing no serious hazard, a broken traffic signal, a minor
traffic accident where no one appears injured or a vehicle
you know to be stolen, call roadside assistance or other
special non-emergency wireless number.
For more information, please call to 888-901-SAFE, or visit our
website www.wow-com.com
There are a variety of accessories available for your mobile
phone. Consult your local dealer for availability.
Travel Charger
The travel charger allows you to charge
the battery while away from your home
or office. It supports standard U.S.
AC120 Volt 60 Hz outlets. It takes 5 hours
to charge a completely discharged
battery.
Battery
Tw o batteries are available. The
standard battery, and the extended
battery.
Desktop Charger
The desktop charger allows you to place
the phone in a convenient stand for
charging. It can charge a completely
discharged battery in 3 hours.
Cigarette Lighter Charger
The cigarette lighter charger allows you
to operate the phone and trickle charge
the phone’s battery from your vehicle. It
takes 5 hours to charge a completely
discharged battery.
130
VX4500
VX4500
131
Page 67
Accessories
Accessories
ranty Infor
WWararranty Infor
mation
mation
Hands-Free Car Kit (Portable)
The hands-free car kit enables you to
attach the phone to the power jack in
your car, providing you with hands-free
operation. It can charge a completely
discharged battery in 5 hours.
Headset
The headset connects to your phone
allowing hands-free operation. It
includes earpiece, microphone, and
integrated call answer / termination
button.
NOTE: It operates in vibration/no sound mode on Manner
Mode/Silence All Mode even when connected to
headset.
Holster
1. WHAT THIS WARRANTY COVERS:
LG offers you a limited warranty that the enclosed subscriber
unit and its enclosed accessories will be free from defects in
material and workmanship, according to the following terms
and conditions:
(1) The limited warranty for the unit and enclosed accessories shall be
a period of one (1) year from the date of original purchase. The
remaining warranty period for the unit being repaired or replaced
shall be determined by presentation of the original sales receipt
for the purchase of the unit.
(2) The limited warranty extends only to the original purchaser of the
product and is not assignable or transferable to any subsequent
purchaser / end user.
(3) The limited warranty is good only to the original purchaser of the
product during the warranty period as long as it is in the U.S.,
including Alaska, Hawaii, U.S. Territories, and all Canadian
Provinces.
(4) The external housing and cosmetic parts shall be free of major
defects at the time of shipment and, therefore, shall not be
covered under these limited warranty terms.
(5) Upon request from LG, the consumer must provide information
satisfactory to LG to prove the date of purchase or exchange.
(6) The customer shall bear the cost of shipping the product to the
Customer Service Department of LG. LG shall bear the cost of
shipping the product back to the consumer after the completion of
service under this limited warranty.
132
VX4500
2. WHAT THIS WARRANTY DOES NOT COVER:
1) Defects or damage resulting from use of the product in other than
(
its normal and customary manner.
(2) Defect or damage from abnormal use, abnormal conditions,
improper storage, exposure to moisture or dampness, unauthorized
modifications, unauthorized connections, unauthorized repair,
VX4500
133
Page 68
WWararranty Infor
ranty Infor
mation
mation
misuse, neglect, abuse, accident, alteration, improper installation, or
other acts which are not the fault of LG, including damage caused by
shipping, blown fuses, or spills of food or liquid.
(3) Breakage or damage to antennas unless caused directly by defects
in material or workmanship.
(4) Alleged defects or malfunctions of the product if the Customer
Service Department at LG was not notified by the consumer
during the applicable limited warranty period.
(5) Products which have had the serial number removed or made
illegible.
(6) This limited warranty is in lieu of all other warranties, express or
implied either in fact or by operations of law, statutory or
otherwise, including but not limited to any implied warranty of
marketability merchantability or fitness for a particular use.
(7) Damage resulting from use of non-LG approved accessories.
(8) All plastic surfaces and all other externally exposed parts that are
scratched or damaged due to normal customer use.
(9) Products operated outside published maximum ratings.
(10) Products used or obtained in a rental program.
(11) Consumables (such as fuses).
3. STATE LAW RIGHTS:
No other express warranty is applicable to this product. THE
DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE
IMPLIED WARRANTY OF MARKETABILITY OR
MERCHANTABILITY, IS LIMITED TO THE DURATION OF THE
EXPRESS WARRANTY HEREIN. LG INFOCOMM U.S.A., INC.
SHALL NOT BE LIABLE FOR THE LOSS OF THE USE OF THE
PRODUCT, INCONVENIENCE, LOSS OR ANY OTHER
DAMAGES, DIRECT OR CONSEQUENTIAL, ARISING OUT OF
THE USE OF, OR INABILITY TO USE, THIS PRODUCT OR FOR
ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY,
INCLUDING THE IMPLIED WARRANTY OF MARKETABILITY OR
MERCHANTABILITY APPLICABLE TO THIS PRODUCT.
Some states do not allow the exclusive of limitation of
incidental or consequential damages or limitations on how long
an implied warranty lasts; so these limitations or exclusions
may not apply to you. This warranty gives you specific legal
rights and you may also have other rights, which vary from
state to state.
4. HOW TO GET WARRANTY SERVICE:
To obtain warranty service, please call the following telephone
number from anywhere in the continental United States:
Tel. 1-800-793-8896 or visit www.lgeservice.com. Please call or
write for the location of the LGE authorized service center
nearest you and the procedures for obtaining warranty claims.
Accessories 131
Aircraft 113
Alarm Clock 84
Alert Beep 75
Alerts 90
Announce Alerts 82
Answer Call 103
Antenna Care 110
Auto Delete 65
Auto NAM 98
Auto Play 66
Auto Retry 102
Auto Save 65
Auto Volume 105
Auto-Answer 103
B
Backlight 92
Banner 91
Battery 16
Battery Information and Care
114
Best Match 82
Blasting Areas 113
FCC RF Exposure Information
10
FDA Consumer Update 118
Font Size 66
Fonts 96
G
Get Apps 68
Get It Now 67
Get Info 69
Getting Your Phone Started 16
Graphics 76
Groups 49
H
Health Care Facilities 112
Hearing Aids 112
Help 83
I
Icon Glossary 109
Important Information 7
Inbox 61
K
Key Light Timer 93
Key Tone 89
L
Language 96
List Contacts 48
Location 108
Lock Mode 21
Lock Phone 99
M
Main LCD 92
Making a Call From Your
Phone’s Memory 44
Making Calls 19
Manner Mode 20
Menus Overview 14
Menu Style 93
Message Icon Reference 61
Message Objects 77
Messages 55
Missed Call 53
Mobile Web 71
Msg Alerts 65
Msg Settings 64
Music 77
Mute Function 21
My Media 76
My Phone Number 108
My VCard 50
N
New E-mail 49
New Message 57
New Number 48
Notepad 86
O
One-Touch Dial 104
Other Medical Devices 112
Outbox 63
P
Pacemakers 111
Phone Info 108
Phone Numbers With Pauses
40
Phone Operation 111
Phone Overview 12
Port Speed 107
Posted Facilities 113
Power On/Off Tone 91