Congratulations for choosing the advanced and compact
VX3200 cellular phone, designed to operate with the latest
digital mobile communication technology, Code Division
Multiple Access (CDMA) and Advanced Mobile Phone Service
(AMPS). Along with the many advanced features of the CDMA
system, such as greatly enhanced voice clarity, this phone
offers:
●Large, easy-to-read, 7-line backlight LCD with status icons.
●Paging, messaging, voice mail, and caller ID.
●18-key keypad.
●Speaker phone feature.
●Menu-driven interface with prompts for easy operation and
configuration.
●Any key answer, auto answer, auto retry, one-touch and
speed dialing with 99 memory locations.
●Bilingual (English and Spanish) capabilities.
Check Accessories
Your mobile phone comes with a rechargeable battery and an
AC adaptor. Please verify that these accessories are included.
6
VX3200
VX3200
7
Important Information
This user’s guide provides important information on the use
and operation of your phone. Please read all the information
carefully prior to using the phone for the best performance and
to prevent any damage to or misuse of the phone. Any
unapproved changes or modifications will void your warranty.
FCC Part 15 Class B Compliance
This device and its accessories comply with part 15 of FCC
rules. Operation is subject to the following two conditions: (1)
This device and its accessories may not cause harmful
interference, and (2) this device and its accessories must accept
any interference received, including interference that causes
undesired operation.
Technical Details
The VX3200 is an all digital phone that operates on both Code
Division Multiple Access (CDMA) frequencies: cellular services at
800 MHz and Personal Communication Services (PCS) at 1.9 Ghz.
Also, the VX3200 works on Advanced Mobile Phone Service
(AMPS). We call it a tri-mode phone. Since the phone operates
on Cellular, PCS and AMPS, the call fail rate is less than on a
conventional dual-mode or singlemode phone.
CDMA technology uses a feature called DSSS (Direct Sequence
Spread Spectrum) that enables the phone to keep
communication from being crossed and to use one frequency
channel by multiple users in the same specific area. This results
in a 10-fold capacity increase when compared with analog
mode. In addition, features such as soft / softer handoff, hard
Handoff, and dynamic RF power control technologies combine
to reduce call interruptions.
The Cellular and PCS CDMA networks consist of MSO (Mobile
Switching Office), BSC (Base Station Controller), BTS (Base
station Transmission System), and MS (Mobile Station). The
following table lists some major CDMA standards.
CDMA Standard
Basic Air Interface
Network
Service
Perf ormance
* TSB -74: Protocol between an IS-95A system and ANSI J-STD-008
1xRTT system receives twice as many subscribers in the wireless
section as IS-95. Its battery life is twice as long as IS-95. High-speed
data transmission is also possible.
14.4kbps radio link protocol and
inter-band operations
IS-95 adapted for PCS frequency
band cdma2000 1xRTT AirInterface
Advanced Mobile Phone Service
MAS-BS
PCSC-RS
Intersystem operations
Nom-signaling data comm.
Speech CODEC
Async Data and Fax
Short message service
Packet Data
Position Determination
Service (gpsOne)
High Speed Packet Data
Cellular base station
Cellular mobile station
PCS personal station
PCS base station
Speech CODEC
8
VX3200
VX3200
9
FCC RF Exposure Information
WARNING! Read this information before operating the phone.
In August 1996, the Federal Communications Commission
(FCC) of the United States, with its action in Report and Order
FCC 96-326, adopted an updated safety standard for human
exposure to radio frequency (RF) electromagnetic energy
emitted by FCC regulated transmitters. Those guidelines are
consistent with the safety standard previously set by both U.S.
and international standards bodies.
The design of this phone complies with the FCC guidelines and
these international standards.
Bodily Contact During Operation
This device was tested for typical use with the back of the
phone kept 3/4 inches (2 cm) from the body. To comply with
FCC RF exposure requirements, a minimum separation distance
of 3/4 inches (2 cm) must be maintained between the user’s
body and the back of the phone, including the antenna, whether
extended or retracted. Third-party belt-clips, holsters, and
similar accessories containing metallic components should not
be used. Avoid the use of accessories that cannot maintain 3/4
inches (2 cm) distance between the user’s body and the back of
the phone and have not been tested for compliance with FCC
RF exposure limits.
Vehicle-Mounted External Antenna
(Optional, if available.)
A minimum distance of 8 inches (20 cm) must be maintained
between the user / bystander and the vehicle-mounted external
antenna to satisfy FCC RF exposure requirements. For more
information about RF exposure, visit the FCC website at
www.fcc.gov.
Caution
Use only the supplied and approved antenna. Use of
unauthorized antennas or modifications could impair call
quality, damage the phone, void your warranty and/or result in
violation of FCC regulations.
Do not use the phone with a damaged antenna. If a damaged
antenna comes into contact with the skin a minor burn may
result. Contact your local dealer for a replacement of antenna.
10
VX3200
VX3200
11
Phone Over
Phone Over
1. Earpiece
2. Flip
3. LCD Screen
4. Speakerphone Key
5. Left Soft Key
6. Side Key
7. SEND Key
8. Headset Jack
9. Manner Mode
Key
view
view
10.Voice Dial/
Voice Memo Key
11. Right Soft Key
12. Navigation Key
13. Message Key
14.Clear Key
15.END/POWER
Key
16. Alphanumeric
Keypad
17. Lock Mode Key
18. Microphone
1. Earpiece
2. Flip Flip open the case to answer an incoming call and
close to end the call.
3. LCD Screen Displays messages and indicator icons.
4. Speakerphone Key Use to set the Speaker Phone Mode.
5. Left Soft Key Use to display the function setting menu.
6. Side Keys Use to adjust the ringer volume in Main Menu
Screen and the earpiece volume during a call.
7. SEND Key Use to place or answer calls.
8. Headset Jack
9. Manner Mode Key
Use to set the Manner Mode (from Main Menu Screen
press and hold for about 3 seconds).
10. Voice Dial/Voice Memo Key Use for quick access to
Voice Dial (Press and hold for about 3 seconds for
quick access to Voice Memo).
11. Right Soft Key Use to select an action within a menu.
12. Navigation Key Use for quick access to Messages,
Speaker on/off, Voice dial and Sounds.
Message Key Use to retrieve or send voice and text messages.
13.
14. Clear Key Press to delete a single space or character.
Press and hold to delete entire words. Press this key once
in a menu to go back one level.
15. END/PWR Key Use to turn the power on/off and to end a
call. Also return to the main menu display screen.
16. Alphanumeric Keypad Use to enter numbers and
characters and select menu items.
17. Lock Mode Key Use in Main Menu Screen to set the
lock function by pressing and holding the key for
about 3 seconds.
18. Microphone
12
VX3200
VX3200
13
Menus Over
Menus Over
view
view
Press Left Soft KeyMenu. Pressto scroll.
Contacts
1. List Contacts
2. New Number
3. New E-mail
4. Groups
5. Speed Dials
6. Voice Dials
7. My VCard
Recent Calls
1. Dialed Calls
2. Received Calls
3. Missed Calls
4. Erase Calls
1. Dialed Calls
2. Received Calls
3. Missed Calls
4. All Calls
5. Call Timer
1. Last Call
2. Home Calls
3. Roam Calls
4. All Calls
6. KB Counter
1. Received
2. Transmitted
3. Total
Messages
1. Voice Mail
2. New Message
3. Inbox
4. Outbox
5. Saved
6. Msg Settings
1. Auto Save
2. Auto Delete
3. Callback #
4. Msg Alerts
5. Signature
6. Auto View
7. Entry Mode
8. Quick-Text
9. Auto Play
7. Erase All
1. Inbox
2. Outbox
3. Saved
4. All
Media
1. Small Pictures
2. Large Pictures
3. My Pictures
4. Sounds
5. My Melodies
6. Animations
7. My Animations
Tools
1. Schedule
2. Alarm Clock
1. Alarm 1
2. Alarm 2
3. Alarm 3
4. Quick Alarm
3. Voice Memo
4. Notepad
5. EZ Tip Calc
6. Calculator
7. World Clock
Settings
1. Sounds
1. Ringers
2. Key Tone
3. Volume
4. Alerts
5. Power On/Off Tone
6. DTMF Length
2. Display
1. Banner
2. Backlight
3. Screens
4. Menu Style
5. Clocks
6. Theme Colors
7. Contrast
8. Fonts
9. Language
0. Power Saver
*. Status Light
3. System
1. Select System
2. Set NAM
3. Auto NAM
4. Serving System
4. Security
1. Lock Phone
2. Restrict
3. Emergency #s
4. Change Code
5. Erase Contacts
6. Reset Default
5. Call Setup
1. Auto Retry
2. Answer Call
3. Auto-Answer
4. One-Touch Dial
5. Voice Privacy
6. Auto Volume
7. TTY Mode
6. Data Settings
1. Data/Fax
2. PC Connection
7. Voice Services
1. Voice Dial Prompt
2. Train Words
8. Location
9. Phone Info
1. My Phone Number
2. S/W Version
3. Icon Glossary
4. Shortcut Help
14
VX3200
VX3200
15
Getting Y
Getting Y
our Phone Star
our Phone Star
ted
ted
The Battery
NOTE: It is important to fully charge the battery before initial use of
the phone.
The phone comes with a rechargeable battery. Keep the battery
charged while not in use in order to maximize talk and standby
time. The battery charge level is shown at the top of the LCD
screen.
Installing the Battery
To install the battery, insert the battery into the opening on the
back of the phone. Put the battery cover on the battery and
push it slightly upwards.
Removing the Battery
Turn the power off. While pressing the PUSH button on the back
of the phone, pull the battery cover downwards and remove it.
Then remove the battery by pressing the upper area of it.
Charging the Battery
To use the charger provided with your phone:
Warning! Use only the charger provided with the phone. Using
any charger other than the one included with the VX3200 may
damage your phone or battery.
1. Plug the round end of the adapter into the phone’s charger
jack and the other end into an electrical outlet.
2. The red light indicates the battery is charging and the
green light indicates the battery is fully charged. The
charge time varies depending upon the battery level. The
maximum charge time for a fully discharged battery is 3.5
hours.
Battery Charge Level
The battery charge level is shown at the top right of the LCD
screen. When the battery charge level becomes low, the low
battery sensor alerts you in three ways: sounding an audible
tone, blinking the battery icon, and displaying
WARNING! If the battery charge level becomes exceedingly low,
the phone automatically switches off and any function in
progress is not saved.
Tur ning the Phone On and Off
Tur ning the Phone On
1. Install a charged battery or connect the phone to an
external power source such as a cigarette lighter charger
or hands-free car kit.
2. Press for a few seconds until the LCD screen lights up.
NOTE: Like any other radio device, avoid any unnecessary
contact with the antenna while your phone is on.
Tur ning the Phone Off
1. Press and hold until the display turns off.
Signal Strength
Call quality depends on the signal strength in your area. The signal
strength is indicated on the screen as the number of bars next to the
signal strength icon: The more bars, the better the signal strength. If
the signal quality is poor, move to an open area. If you are in a
building, the reception may be better near a window.
LOW BATTERY
Fully DischargedFully Charged
16
VX3200
VX3200
17
Getting Y
Getting Y
our Phone Star
our Phone Star
ted
ted
Screen Icons
When the phone is powered on, the top line of the LCD screen
displays icons indicating the status of the phone.
Icon
Signal strength indicator.The strength of the signal
received by the phone is indicated by the number of bars
displayed.
Battery indicator.Indicates battery charge level.
In use indicator.A call is in progress.
* No icon indicates the phone is in Main Menu Screen.
No service indicator.The phone is not receiving a system
signal.
New text message indicator.
New voice mail indicator.
New text and voice message indicator.
In vibrate
Alarm
Roaming indicator.The phone is outside of the home
service area.
1x service indicator.
Analog indicator.
SSL
Location on mode.
Data Session
Description
Silence all
Digital indicator.
TTY.
E911 only mode.
Making Calls
1.Make sure the phone is turned on. If not, press for about
3 seconds.
2. Enter the phone number (include the area code if needed).
3.Press .
lf the phone is locked, enter the lock code.
Call Failed
Restricted
NOTE: If the phone is restricted, you can only dial phone
- indicates the call did not go through.
- indicates outgoing calls are in restricted mode.
numbers saved in the Emergency Numbers or your
Contacts. To turn off this function:
Menu -> Settings -> Security -> Enter Lock
Code -> Restrict -> Off -> OK
4.Press to end the call.
Correcting Dialing Mistakes
If you make a mistake while dialing a number, press once
to erase the last digit entered or hold downfor at least 2
seconds to delete all digits.
Redialing Calls
1. Press twice to redial the last number you dialed. The
last 30 numbers are stored in the call history list and you can
also select one of these to redial.
Receiving Calls
1.When the phone rings or vibrates press to answer.
NOTE: If you press or the side keys while the phone is
ringing, the ringing or vibration is muted for that call.
18
VX3200
2. Press or twice to end the call.
VX3200
19
Quick Access to Convenient Featur
Quick Access to Convenient Featur
es
es
Manner Mode
Use Manner Mode in public places. When Manner Mode is set,
is displayed on the screen, the key tones are silent, and the
phone is set to vibrate.
Manner Mode Quick Activation
1. From Main Menu Screen press for 3 seconds.
Manner Mode Quick Cancellation
1. Press to switch to Normal Mode.
Lock Mode
Use Lock Mode to prevent others from using your phone.
When Lock Mode is set, your 4-digit password is required to
use the phone.
NOTE: The lock code/password is the last 4 digits of your phone
number.
Lock Mode Quick Activation
1.From Main Menu Screen, press for 3 seconds.
Mute Function
The Mute function prevents the other party from hearing your
voice, but allows you to hear the other party.
Mute Quick Activation
1. Press Left Soft Key Mute during a call.
Mute Quick Cancellation
1. Press Left Soft Key again.
Volume Quick Adjustment
Use the side keys to adjust the earpiece and ringer volumes.
The upper key increases the volume and the lower key
decreases the volume.
●
Earpiece volume can be adjusted during a call.
NOTE: Key beep volume is adjusted through the Menu.
Lock Mode Quick Cancellation
1.Press Right Soft Key Unlock then enter your 4-digit
password.
20
VX3200
VX3200
21
Quick Access to Convenient Featur
Quick Access to Convenient Featur
es
es
Call Waiting
Your cellular service may offer call waiting. While a call is in
progress, two beeps indicate another incoming call. When call
waiting is enabled, you may put the active call on hold while
you answer the other incoming call. Check with your cellular
service provider for information about this function.
1. Press to receive a waiting call.
2.Press again to switch between calls.
Caller ID
Caller ID displays the phone number or name of the incoming
call. If the caller’s identity is stored in Contacts, the name appears
with the number. Check with your service provider to ensure they
offer this feature.
Speed Dialing
Speed dialing is a convenient feature that allows you to make
phone calls quickly and easily with a few keystrokes. Your phone
recalls the number from your Contacts, displays it briefly, and
then dials it. Speed Dial Number 1 is assigned to Voice Mail by
default, but you can edit it.
Dialing Speed Dials from 2 to 9
Press and hold the Speed Dial number.
OR
Enter the speed dial number and press .
Dialing Speed Dials from 10 to 99
Press the first digit and then press and hold the key of the
last digit.
OR
Enter the first and second digits and press
.
Voice Dialing
Voice Dialing is a convenient feature that allows you to make
phone calls quickly and easily by saying a voice command that
you have recorded in your Contacts.
To make a Voice Dial call:
1.From Main Menu Screen, press the Voice Dial key ().
2.Say the recorded Voice Dial command.
The phone confirms and dials the phone number.
22
VX3200
VX3200
23
Entering and Editing Infor
Entering and Editing Infor
mation
mation
Text Input
You can input and edit your Banner, Schedule, Contacts, and
messages.
Key Functions
( )
Right Soft Key (Left Soft Key): Press to scroll
through the following text input modes:
matching words.
Space: Press to complete a word and insert a
space.
Clear: Press to delete a single space or character.
Hold to delete words.
Punctuation: In T9 mode, press to insert
punctuation in a word and complete a sentence.
Text Input Modes
There are five modes for entering text, numbers, special
characters, and punctuation. In a text entry field, pressing Right
Soft Key (or Left Soft Key ) displays a pop-up list of text
modes.
T9Word (T9) Mode
Use to type text using one keystroke per letter. The phone
translates keystrokes into common words by using the letters on
each key and a compressed database.
Abc (Multi-tap) Mode
Use to add words to the T9 database.
123 (Numbers) Mode
Use to type numbers using one keystroke per number.
Symbols Mode
Use to insert special characters or punctuation. There are 39
special characters including “SP” which inserts a space and “LF”
which forces the text to the next line.
Smiley Mode
Use to insert smiley graphics. There are 40 smiley characters.
Changing Letter Case
Using T9 and Abc text input modes you can set the capitalization.
Press to cycle through the following:
24
VX3200
Initial Cap (T9Word / Abc)
Only the first letter is capitalized. All subsequent letters are lower
case.
VX3200
25
Entering and Editing Infor
Entering and Editing Infor
mation
mation
Caps Lock (T9WORD / ABC)
All letters are capitalized.
Lower Case (T9word / abc)
All letters are in lower case.
Text Input Examples
Display the text modes and select a text mode:
1.In a text entry field, press Right Soft Key(or Left Soft Key
) to display text modes.
2.Press to highlight the text input mode you want to use.
3.Press to select the highlighted text input mode.
Using Abc (Multi-tap) Text Input
1. Press Right Soft Key(or Left Soft Key ) to change to
Abc mode.
2. Press to change to ABC Caps Lock.
3. Press .
LG is displayed.
Using T9 Mode Text Input
1.Press Right Soft Key(or Left Soft Key ) to change to
T9Word mode.
2.Press .
3.Press to complete the word and add a space.
4.Press.
Call the office is displayed.
Using the NEXT Key
After you have finished entering a word, if the word displayed
is not the one you want, press to display additional
choices of words from the database.
1. Press .
Good is displayed.
2. Press .
The display gives you additional choices such as:
Gone, Hood, etc.
Adding Words to the T9 Database
If a word is not in the T9 database, add it by using Abc (Multitap) mode text entry.
1. Press Right Soft Key(or Left Soft Key ) to change to
Abc (multi-tap) mode.
2. Press .
Bop is displayed.
3.Press Right Soft Key(or Left Soft Key ) to change to
T9 mode to add the word Bop to the T9 database.
4. Press to erase the existing word.
5. Press .
cop is displayed.
6. Press .
bop is displayed.
Home,
26
VX3200
VX3200
27
Contacts in Y
Contacts in Y
our Phone’
our Phone’
s Memoryy
s Memor
Contacts Entries
This allows you to have easy access to your most frequently
dialed phone numbers. You may store up to 299 entries with up
to 5 phone numbers each. Each entry may be up to 22
characters. Each phone number may be up to 48 digits.
The Basics of Storing Contacts Entries
1. From Main Menu Screen enter the phone
number you want to save (up to 48 digits).
2. Press Left Soft Key Save.
3. Use to select a Label and press .
Home / Home2 / Office / Office2 /
Mobile / Mobile2 / Pager / Fax / Fax2 /
None
4. Use to select New Name or Existing
and press .
NOTE: Use Existing to add another phone
number to a contact already stored in
memory.
NOTE: To skip name entry, press to go to
the next step.
If the information is complete, press
NOTE:
to return to the Main Menu Screen.
To further customize the Contact entry,
NOTE:
press Left Soft Key Done.
6. Continue saving the entry as a Speed Dial,
press to select Speed Dial.
7. Enter a Speed Dial digit (e.g., 2)
Use the keypad and press or
Use to highlight the Speed Dial
location and press .
8. Continue saving the entry to have Voice Dial
access use to highlight Voice Dial and
press .
9. Press to select OK.
10. Follow the Voice Dial prompts.
28
VX3200
5. Enter a name for the phone number (up
to 22 characters) and press .
A confirmation message is displayed
briefly.
VX3200
29
Contacts in Y
Contacts in Y
our Phone’
our Phone’
s Memoryy
s Memor
Options to Customize Your Contacts
Once basic phone number and name informations are stored in
your Contacts, you can edit and/or customize the entries.
1.Press Right Soft Key () Contacts and use to hightlight
the Contact entry you want to edit , then press .
2.Press Left Soft KeyEdit to access the Edit Entry screen.
3.Use to highlight the information you want to customize
and press.
Adding or Changing the Group
Allows you to manage your Contacts entries by organizing them
into groups.
1.Press Right Soft Key () Contacts and use to highlight
an entry, then press .
2.Press Left Soft Key Edit.
3.Use to highlight
4.Use to select the Group and press .
No Group / Family / Friends / Colleagues / Business /
School
5.Press Left Soft Key Done to continue editing the Contact
entry.
NOTE: You can change the name of the group, add groups, and
delete groups.
No Group and press.
Changing the Call Ringer
Allows you to identify who is calling by setting different ringers
for different phone numbers in your Contacts. It is automatically
set to the default ringer when the Contact is saved.
1. Press Right Soft Key () Contacts and use to highlight
an entry, then press .
2. Press Left Soft Key Edit.
3. Useto highlight
4. Use to select the Ringer Type and press .
5. Press Left Soft Key Done to continue editing the
Contact entry.
Changing the Message Ringer
Allows you to identify who is sending you a message by setting
different ringers for different phone numbers in your Contacts. It
is automatically set to the default ringer when the Contact is
saved.
1.Press Right Soft Key () Contacts and use to highlight
an entry, then press .
2.Press Left Soft Key Edit.
3.Useto highlight
4.Use to select the Ringer Type and press .
5.Press Left Soft Key Done to continue editing the Contact
entry.
Default Ringer and press .
Default T ext Msg Ringer and press.
30
VX3200
VX3200
31
Contacts in Y
Contacts in Y
our Phone’
our Phone’
s Memoryy
s Memor
Adding or Changing the Memo
Allows you to enter up to 32 characters as a memo to the
Contact entry.
1.Press Right Soft Key () Contacts and use to highlight
an entry, then press .
2.Press Left Soft Key Edit.
3.Use to highlight Memo and press.
4.Enter text and press .
5.Press Left Soft Key Done to continue editing the Contact
entry.
Adding or Changing the Picture ID
Allows the phone to display a picture to identify the caller.
1.Press Right Soft Key () Contacts and use to highlight
an entry, then press .
2.Press Left Soft Key Edit.
3.Use to highlight
4.Use to select a graphic and press Select.
5.Press Left Soft Key Done to continue editing the Contact
entry.
Default and press.
Adding Speed Dial
1.Press Right Soft Key () Contacts and use to highlight
an entry , then press .
2.Press Left Soft Key Edit.
3.Use to highlight the phone number you want to set
with a Speed Dial and press .
4.Press to select
5.Enter a Speed Dial digit.
Use the Keypad and press , or Use to highlight the
Speed Dial digit and press .
6.Press Left Soft Key Done to continue editing the Contact
entry, or Press to return to the Main Menu Screen.
Adding Voice Dial
1.Press Right Soft Key () Contacts and use to highlight
an entry, then press .
2.Press Left Soft Key Edit.
3.Use to highlight the phone number you want to set
with Voice Dial and press .
4.Press to select
5.Press to select OK.
6.Follow the Voice Dial prompts.
7.Press Left Soft Key Done to continue editing the Contact
entry, or Press to return to the Main Menu Screen.
Speed Dial and press .
Voice Dial and press .
32
VX3200
VX3200
33
Loading...
+ 42 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.