MFL67680096
RELEASING THIS DRAWING WITHOUT PERMISSION LG Electronics SHOULD BE ACCUSED ACCORDING TO THE LAWS AND COMPANY RULES.
LG .
|
|
|
|
|
|
|
|
|
|
|
SEC. |
|
|
|
PRINTING DEGREE |
MATERIALANDPRINTINGDESCRIPTION |
LG MODEL |
LANGUAGE |
PAGE |
REMARK |
|
WORK |
BRAND |
MODEL |
P/NO. |
EXTERIER |
INTERIER |
|||||
1 |
LG |
VR648*****.****GSP |
MFL67680072 |
1 |
1 |
80gOFFSET |
- |
+ |
140 |
A5 |
|
|
|
|
|
|
|
|
|
|
|
<< >>
<BACK> |
<FRONT> |
<![endif]>210
P/NO.
148 |
148 |
|
|
|
|
1., , , .
2., , FILM .
3..
4..
5.,
LG(63)-A-5501-34 .
<<NOTES >>
1.Material, printing and exterier size are refer to work tables.
2.Printing, text size and line are based on LG design film.
3.Exterier size on the drawing is cutting line.
4.Before product controlled by criteria sample.
5.The part should not contain prohibited substances(Pb,Cd,Hg,Cr+6,PBB,PBDE) and details should comply with LG standard of LG(63)-A-5501-34.
|
|
|
|
|
|
|
|
|
|
|
DR COMPLETED |
|
|
|
|
|
|
|
|
|
|
DR |
|
|
|
|
|
|
|
|
mm SCALE 1 1 |
|
ILLUSTRATOR |
: |
|
|
|
|
|
|
TRIG. |
UNIT |
T |
Manual,Owners |
|||
5 |
|
|
|
|
MODELING DESIGNED REVIEWED CHECKED APPROVED |
TI |
|||||
4 |
|
|
|
|
|
|
|
|
L |
HIT-N |
1/1 |
|
|
|
|
18.06.19 |
18.06.19 |
18.06.19 |
E |
||||
3 |
|
|
|
|
|||||||
|
|
|
|
|
|||||||
2 |
|
|
|
|
LG |
( ) |
RELATED DWG. |
DWG. |
MFL67680096 |
||
1 |
|
|
|
|
|
|
|||||
REV. NO. |
REVISION DESCRIPTION |
REF. NO. |
DATE |
PREPARED APPROVED |
LG Electronics Inc. |
|
|
No. |
|||
|
|
|
/ / |
|
|
|
|
|
|
|
|
OWNER’S MANUAL
HOM-BOT
Before using, please carefully read the Safety Precautions pages to allow for safe operation of the product. After reading the operation manual, please keep it in an easily accessible location. Be sure to charge the battery fully before using the product for the first time after purchase.
VR6480**
www.lg.com
MFL67680096 |
Copyright © 2018 LG Electronics Inc. All Rights Reserved. |
FEATURES
Zigzag
Corner Master
By having adopted a brand new concept design that is appropriate for walls, the Robot Cleaner's cleaning performance is incredibly efficient.
Learning Mode
The Robot Cleaner is capable of memorizing the cleaning environment via its
Smart Operation feature for smarter cleaning.
Turbo Mode
In the Turbo mode, the Robot Cleaner operates the suction motor and the brushes at a greater speed giving cleaner results.
When selected, the "Turbo" mode is automatically activated on carpets, which enables the Robot Cleaner to run more efficiently.
Drawer Mop Plate (Option)
The "Drawer mop plate" makes it much easier for users to fit and remove the mop without having to turn over the device.
My Space Mode
By commanding it to clean a particular area, the Robot Cleaner quickly cleans that desired area.
Repeat Cleaning
The Robot Cleaner will continuously clean.
Location Search Function
If the Robot Cleaner is moved from a spot while operating, the device will automatically search for the previous location and return to the spot from where it was interrupted.
LG Smart ThinQ Smartphone Application
You can control the Robot Cleaner from your smartphone.
CONTENTS
1
BEFORE USING
2~6 Safety precautions
7 Included with product
8~9 Parts description - robot cleaner 10~11 Button functions – robot cleaner
12Display status information
13Before you start
14Overview
2
METHOD OF USE
15How to install the home station
16How to turn the robot cleaner power supply on & off
17How to start and stop cleaning 18~20 How to charge the battery
21Using Magnetic Wall Strips 22~23 Cleaning modes
24~25 Auxiliary cleaning modes
26Time setting
27Scheduled cleaning
28Mop cleaning (option)
29Location search function 30~31 Smart diagnosis
32~51 Smart application function
52Product info initialization
3
HANDLING METHOD AFTER USE
53Cleaning the dust bin
54Cleaning the dust bin filter
55Cleaning the brush
56Cleaning the sensors/charging terminals
57Cleaning the side brush
58Cleaning the ultra microfiber mop
(option)
4
ADDITIONAL INFORMATION
59~61 Troubleshooting
62 Before you call for service
5
REFERENCE
63~64 Product Specifications
65Reference items
66[IEC 62929 Standard] Setting for Cleaning Performance Test
Safety precautions
The purpose of the safety precautions described below is for the user to use the product safely and correctly to prevent any unexpected risk of injury or damage.
Basic safety precautions
After reading this manual, please keep it in an easily accessible location.
WARNING
CAUTION
This is the safety alert symbol. This symbol alerts you to potential hazards that can result in property damage and/or serious bodily harm or death.
Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
WARNING
1.This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
2.Children should be supervised to ensure that they do not play with the appliance.
3.If the supply cord is damaged, it must be replaced by
LG Electronics Service Agent in order to avoid a hazard
4.This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance must not be made by children without supervision.
2
SAFETY PRECAUTIONS
WARNING
For your safety, do not remove the battery from the Robot Cleaner. If you need to replace the battery of the Robot Cleaner, take it to the nearest authorized LG Electronics service center or dealer for assistance.
Failure to follow this warning can cause fire or product failure.
Make sure the power cord of the home station is not crushed under a heavy object or damaged by contact with sharp objects.
Failure to follow this warning can cause electric shock, fire or product failure. If the power cord is broken, do not plug it in. Take the product to an LG
Electronics Authorised service repairer.
Do not place the home station and the Robot Cleaner near a heating device.
Doing so can cause product
deformation, fire, or product failure.
Do not force the power plug to bend. Do not use the power plug when it has been damaged or loosened.
Doing so can cause fire or product failure.
Do not touch the power plug with wet hands.
Doing so can cause electric shock.
Never use the Robot Cleaner with a battery and/or home station from any other product than the Robot Cleaner.
Doing so can cause fire or product failure.
Do not use the Robot Cleaner when candles or fragile objects are placed on the floor.
Doing so can cause fire or product failure.
Always use a dedicated power outlet with a 10 amp rating.
If multiple appliances are connected to an outlet simultaneously, they can generate enough heat to cause a fire.
When pulling out the home station power plug, always pull it out by grabbing the plug, not the cord. When pulling out the power plug, do not to touch the prongs with your fingers.
Doing so can cause an electric shock.
Do not allow children or pets to play with or rest upon the Robot Cleaner at any time. Do not use the Robot Cleaner while an object is hanging from it.
Doing so can cause injury or product damage.
3
SAFETY PRECAUTIONS
WARNING
|
Do not spray or use |
|
|
inflammable materials, |
|
|
surfactants, or drinking water |
|
<![if ! IE]> <![endif]>Gasoline |
in the vicinity of the Robot |
|
Cleaner. |
||
|
||
|
Doing so can cause fire or |
|
|
product failure. |
*Inflammable materials: gasoline, thinner, etc.
*Surfactant: detergent, articles for bath, etc.
Do not insert any part of the body, such as a hand or foot, below the brush or wheels of the Robot Cleaner while in use.
Doing so can cause injury or product damage.
Do not operate the Robot Cleaner on narrow and high furniture such as a wardrobe, refrigerator, desk, table, etc.
Doing so can cause injury, product failure or damage which is not covered by the warranty.
Do not activate the device on a floor that has more than a
10 degree incline.
The device may not work properly.
Turn the power supply off immediately if any abnormal sound, odor, or smoke is generated from the Robot Cleaner by removing it from the home station and turning off the main switch on the rear side of the unit.
Failure to do so can cause fire or product failure.
Do not operate the Robot Cleaner in a room where a child is sleeping.
Doing so can cause injury or product damage.
Do not leave Children or pets near the Robot Cleaner unsupervised.
Doing so can cause injury or product damage.
This product is intended for indoor domestic home use and should not be used in mobile applications. it should not be used in commercial applications such as workshops or garages or around indoor swimming pools, etc.
4
SAFETY PRECAUTIONS
CAUTION
Frequently empty the dust bin and maintain its cleanliness.
The dust collected in the dust bin can trigger allergies and may contain harmful insects. it should be cleaned after each use.
Use the Robot Cleaner indoors only.
Using it outdoors can cause product failure and irreparable damage to the unit.
Close the cover of the dust bin on the main unit before starting cleaning.
If the cover is not closed, it can cause injury or product damage.
DO NOT use the Robot Cleaner around a banister,
staircase or any other dangerous place.
Doing so could cause injury or
damage to the unit.
In rare cases, the Robot Cleaner’s brush can damage carpet. If this happens, immediately stop the cleaning operation.
When a carpet has long tassels, the tassels can be damaged.
Do not let the main unit and charging terminal of the home station come into contact with metallic objects.
Doing so can cause product failure.
Do not put water, detergent, etc. into or onto the Robot Cleaner.
Doing so can cause product failure. Do not put any water or detergent on the Robot Cleaner.
If liquids get inside of the Robot Cleaner, turn off the power supply and contact an LG
Electronics sales agent or customer care center.
Do not drop the Robot Cleaner or subject it to strong impacts.
Doing so can cause injury or product failure not covered by the warranty.
Do not expose the Robot Cleaner to cold temperatures
(less than -5 ˚C) for a long period of time.
Doing so can cause product
failure.
Remove any cables or string from the floor before starting.
Cable or string can get tangled in the wheels of Robot Cleaner and cause product failure or the cord of an appliance can be disconnected.
Make sure the Robot Cleaner is not put on a table or desk, with the power ON.
It may result in an injury or damage to the product.
Do not allow the Robot Cleaner to sweep up liquids, blades, thumb tacks, sharp objects or ashes, hot or cold. etc.
These items can cause product failure or damage.
Do not put sharp objects into the opening of the Robot Cleaner’s ultrasonic sensors.
Doing so can cause product failure.
Do not use the Robot Cleaner when the dust bin is completely full.
Doing so can cause product failure.
5
SAFETY PRECAUTIONS
CAUTION
If the floor is wet or has wet spots, wipe them up before using the Robot Cleaner. Do
not use the Robot Cleaner on a wet surface.
Doing so can cause product failure.
When attaching the mop, ensure that it is fitted correctly so that it does not block the lower camera sensor.
Blocking the bottom camera sensor may not allow the product to work correctly.
To save energy when the Roboking is not in use for longer periods, turn off the power switch, and turn on the
power switch again just prior to using the Robot cleaner again.
When the robot cleaner is operating, it may hit the chair leg, desk leg, table leg or other narrow pieces of furniture.
For quicker and better cleaning, place the dining chairs on top of the dining table.
NOTE: Very low thresholds will allow the Robot cleaner to go over them and perhaps into an undesirable location. Make sure that all the doors of the rooms that are not to be cleaned are closed.
Tip Check the following items before use:
• Empty the dust bin after each operation or prior to it filling up.
• Remove any cables or long strings from the floor.
• Remove any moisture from the floor before cleaning.
• Close the cover of the dust bin before cleaning.
• Remove fragile or unnecessary objects from the room to be cleaned.
For example, remove expensive ceramics and valuables from the floor.
• Confirm whether the battery has sufficient power, and if it is low, recharge it.
• Close the doors of any room that you do not want the Robot Cleaner to enter. During cleaning, the Robot Cleaner may enter another room and continue cleaning.
• Do not use this product in the room where a child is sleeping alone. The child can be hurt or woken.
• Remove towels, foot towel or any other thin cloth from the floor as they can get caught by the brush.
• Before starting the device, it's better to remove carpets that are thicker than 20 mm as they may cause it to malfunction.
• Please close any balcony doors as the wheels may get stuck while cleaning.
6
Included with product
Robot Cleaner
Remote controller |
Home station |
Adapter |
► Appearance and accessories may vary depending on model.
Manual
Cleaning Tool |
Dust bin filter* (spare) |
Manual |
Magnetic Wall strip* |
|
|
|
(3.2 ft / 2 m) |
for cleaning |
|
|
|
sensors |
|
|
|
for cleaning |
|
|
|
the filter |
|
|
|
Cleaning brush |
Mop plate* |
Ultra microfiber mop* |
|
(on dust bin cover) |
|
(2 pieces) |
Batteries for remote controller |
Side brush* |
Pet Brush* |
(2 units of AAA size) |
(2 pieces) |
|
*Available on some models. |
|
|
7
Parts description - robot cleaner
Plan view
Upper camera sensor
Dust bin cover
Display & function buttons
Dust bin compartment release button
Front view
Ultrasonic sensors
Obstacle detecting sensor window Detecting
sensors of home station & Receiving sensors of
remote controller
Front camera LED
Rear view
Main Power switch
Ventilation port
Bottom view
Cliff detection sensors
Side brush
Charging terminals
Brush
Wheel
Battery housing
Lower camera sensor
►Figures can be different from actual objects.
8
PART DESCRIPTION – HOME STATION / DUST BIN
Home station
Remote controller holder
Charging terminal
Adapter jack
Power cord fixing hook
Dust bin
Dust bin handle
Cleaning brush
Dust bin cover
Suction port flap
Sponge filter
Dust bin lid opening button
EPA filter
Filter cover
►Figures can be different from actual objects.
9
Button functions – robot cleaner
TURBO
START/STOP
MODE
• If the button is pressed, ‘Turbo Mode’ will be set with a voice confirmation.
• If the button is pressed whilst in ‘Turbo Mode’, it will be canceled.
• Used to turn the power on from Standby, start or stop cleaning.
• If the button is pressed whilst the unit is powered ON, it will start cleaning.
• If button is pressed during the cleaning, it will stop the cleaning.
• If the button is pressed for about 2 sec. whilst the power is ON, the power will be returned to Standby.
• If the button is pressed in 'Smart Diagnosis' mode, it will end the diagnosis.
• Used to change the clean mode setting.
• If the machine is at the Home Station, ‘Spot Clean’ option is not available.
• The 'My Space' mode can only be selected by remote control (when the Robot Cleaner is not on the home station).
HOME
BUTTON LOCK
On/Off
Language
Change
Product registration (Wi-Fi)
Front camera On/OFF
•Used to return the Robot Cleaner back to the home station for charging.
•If cleaning is finished or the battery is low, the Robot Cleaner will return to the
Home Station by itself to recharge its battery.
•Pressing the ‘Turbo' and 'Mode' button for 3 seconds will activate or deactivate the Lock function.
•If 'Lock' is ON, a voice announcement "Key lock has already been set" will be heard each time a button is pressed.
•Pressing the ‘HOME’ button for 3 seconds will change the language for the voice message. (English, Spanish, Italian, French, German, Danish, Czech, Hungarian)
•You cannot use this function with the button on the remote controller.
•Press and hold down the Turbo button for 3 seconds to activate the registration mode with a voice message.
•This mode is for registering the product to Robot Cleaner over Wi-Fi.
•Press and hold down the MODE and CHARGE buttons for 3 seconds to activate or deactivate the front camera.
•Home Guard and Home View will not be available with the front camera disabled.
10
BUTTON FUNCTIONS – REMOTE CONTROLLER
Option
Power
Pressing this button will turn the power on from Standby or the power will be returned to Standby while the power is
ON. (p17)
Mode
Changes the cleaning mode.
(p22)
Directional button
This button enables Manual
Operation and selection of an area in 'My Space cleaning'
mode.
Repeat
This button allows activating or deactivating 'Repeat Cleaning'
mode. (p25)
Schedule
Used to start cleaning at a scheduled time. Pressing the button for 3 sec. will
cancel the scheduled cleaning.
Schedule Setting/Cancel options are available only in
'Charge' mode. (p27)
Clock
Used to set the current time indicated on the Robot
Cleaner. (p26)
Home
Used to recharge the Robot Cleaner by making it return to the Home Station. (p18)
Turbo
Used to activate or deactivate
'Turbo' mode. (p25)
Start/Stop button
Pressing the button will Start or Stop the Robot Cleaner, or
confirm a cleaning schedule or
time setting.
My Space
Used to put the Robot Cleaner in 'My Space clean' mode. (p23)
Mute
Used to activate or deactivate 'Mute' mode. (p12)
Diagnosis
Used to run Smart Diagnosis. Available only when Robot
Cleaner is recharging. (p30)
Tip • With the machine's power OFF, the Remote Controller will not work.
• To turn the power ON/OFF, use the 'START/STOP' button on the upper section of the Robot
Cleaner or 'Power' button on the Remote Controller.
• The 'Mode', 'My Space' or 'Clock' button can only be used after stopping the Robot Cleaner or whilst it is charging on the Home station.
11
Display status information
Lock icon
Indicates whether
'Lock‘ is activated
or not.
Remote connection
Is Displayed smartphone
Robot
Schedule icon
Indicates the status of Schedule/'Once reservation', or
'Daily reservation'
setting.
Repeat cleaning
Displayed if the machine is in 'Repeat
Cleaning' mode.
Zigzag cleaning
This icon is displayed to indicate Robot Cleaner is working in a Zigzag Clean.
Cell by Cell cleaning
This icon is displayed to indicate Robot Cleaner is working in a Cell by Cell cleaning mode.
Time display
This indicates the current and scheduled time.
Mute icon
This icon indicates whether the Mute is ON or OFF.
Battery icon
This icon indicates the residual battery level, it flashes if the battery needs recharging.
AM/PM icon
This indicates a.m. or p.m. according to the clock setting.
Turbo icon
This display illuminates if Turbo Mode is activated.
Homing icon
This icon is displayed if Robot Cleaner is in 'Homing' mode.
My Space cleaning
Is displayed when the
Robot Cleaner runs
My Space cleaning mode.
Spot cleaning
This icon appears when Spot cleaning is selected.
Tip • Once the clean mode is selected (Zigzag or Cell by Cell) it will be remembered even if the power is OFF.
•To cancel the reservation, please press the 'Schedule' button on the remote for 3 seconds while the Robot Cleaner is recharging.
12
Before you start
Check these items before cleaning
•Do not use this device in a room where a child is left alone. The child could be injured.
•Remove fragile or unnecessary objects from the room to be cleaned. Especially, remove expensive ceramics and valuables from the floor.
•Close the cover of the dust bin compartment before cleaning.
•Remove any moisture that might be on the floor.
•Remove cables, strips, towels, mats etc. from the floor so they will not get tangled in the brushes.
•Confirm whether the battery charge is sufficient, and if it is low, recharge it.
•Empty the dust bin before or after each clean, or before it becomes full.
•Close the doors of any room that you do not want the Robot Cleaner to enter. During cleaning, the Robot Cleaner may enter another room and continue cleaning.
•When the mop is attached, Robot Cleaner will not be able to go over thresholds of 5 mm or higher.
If you are not planning to use the mop for cleaning, remove the mop before using Robot Cleaner.
•Before starting the device, it's better to remove carpets that are thicker than 20 mm as they may cause it to malfunction.
•Please close any balcony doors as the wheels may get stuck while cleaning.
Loading the remote controller battery
1.Open the battery cover by lifting the rear hook of the remote controller.
2.Insert two AAA batteries, checking for +, - nodes while loading.
3.Close the battery cover completely so that the batteries will not fall out.
–
+
+
Precautions while using the remote control
•Only press one button at a time.
•Do not drop or subject it to any impact.
•Do not store it near devices that give off heat, fire or hot air.
•Certain fluorescent lamps, such as the three band radiation lamp, can interfere with the activation of the remote control. Therefore, use it as far away as possible from such lamps.
•If the remote control is far from the Robot Cleaner when activated, it may fail to operate properly. Use the remote within 3 m of the Robot Cleaner if possible.
13
Overview
1
2
3
4
5
6
Install the home station. (p15) |
|
1.5 |
Insert the power cord plug into an outlet and locate the |
|
2 |
station against a wall. If power is not supplied to the |
1.5 |
home station, the Robot Cleaner will not charge.
Turn on the power supply of the Robot
Cleaner. (p16)
Turn ON the power switch on the rear-left of
Robot Cleaner, and press the ‘START/STOP’ button on the top or press the ‘Power’ button on the Remote controller.
If the power supply is not turned on, refer to page 16.
Check the dust bin.
Check the cleanness of the dust bin before starting cleaning and close the dust bin compartment cover on the main unit.
Start cleaning. (p17)
Press the ‘START/STOP’ button (or ‘ ’ button on the
Remote Controller) once again while the Robot Cleaner is turned on. You will hear an announcement of the cleaning mode and cleaning will begin once the Robot Cleaner has reversed and turned around.
Automatic charge. (p18~20)
The Robot Cleaner will self-diagnose and automatically return to the home station to recharge before
the complete discharge of the battery. It takes approximately three hours to charge the battery.
Use the cleaning mode and auxiliary functions. (p22~28)
Use the buttons on Robot cleaner and Remote
Controller to use each cleaning mode and supporting features Cleaning modes include ZigZag, Cell by Cell, Spot, My space, and Repeat cleaning; supporting features include Manual, Scheduled and Microfiber Mop cleaning.
< Warning > When the Robot Cleaner is operated with the dust bin compartment lid left open, it can cause an injury or serious damage to the product.
14
How to install the home station
How to Install the Home Station
1.Position the home station against a wall on hard, level flooring to prevent sliding during docking.
Installing the home station on carpet is not recommended. The robot cleaner may have difficulty docking.
Remove objects within 1.5 m to the right and left side and within 2 m to the front.
1.5
1.5
2
2. Plug the jack into the home station.
3. Plug the power cord into an outlet.
Wrap the remaining power cord around the fixed hook on the back side of the home station or along the wall surface so that the travel path of the Robot Cleaner will not be obstructed.
power cord keeper
4. Fix the home station against the wall so that it does not move. Then turn on the power switch.
5. When the remote controller is not used, store it in the remote controller holder on the home station.
Tip • Always keep the home station plugged in when in use. If the home station is not plugged in, the Robot Cleaner will not return to the station to charge automatically.
< Warning > Do not operate the Robot Cleaner if the Home Station has a damaged cord or |
|
plug, if it is not working properly, or if it has been damaged or dropped. To |
|
avoid electrical hazards, the cord must be replaced by LG Electronics, Inc. or a |
|
qualified service person. |
15 |
How to turn the robot cleaner power supply on & off
Turning on the main power supply
Make sure the Power Switch is on at the rear-left of the Robot
Cleaner.
If the power is OFF, turn the switch ON.
When turning on the power switch, do not press or touch any button located on the upper section of the Robot Cleaner. Button operations can be delayed.
Turn off the power switch if the Robot Cleaner is not used for a long period of time in order to protect the battery. The Robotic Cleaner cannot charge if the main switch is in the "OFF" position.
Turning on from Stand By power.
With the Standby power of the Robot Cleaner OFF, press 'START/ STOP' button for 1 second until a "Ting" sound is heard or press 'Power' button on the remote controller. In about 10 seconds, the power will be on and a melody will sound.
If 10 minutes elapse without the Robot Cleaner having being given an active command after being turned on, the power will automatically return to Standby again.
Turning off the power supply
Press and hold the START/STOP button for two seconds or
Power button on the remote controller while the Robot Cleaner is turned on. A melody will sound when the power is turned off.
Tip • If the power cannot be turned on, do the following.
- Turn the main power switch OFF, wait 5 seconds then ON again.
- Press the ‘START/STOP’ button or press 'Power' button on the remote controller after the main power switch has been turned on again
- If the power is not turned on or if there is no display but only the “Ting” sound, put the Robot
Cleaner manually on to the home station as the battery may be flat.
16
How to start and stop cleaning
Using the buttons on the Robot Cleaner
After the Robot Cleaner main power switch is turned on, press the
START/STOP button to begin cleaning. A melody will sound and cleaning will begin.
Press the START/STOP button during the cleaning cycle to stop cleaning.
When the ‘START/STOP’ button is pressed while the power supply of the Robot Cleaner is in Standby, the power will be turned on.
Press the ‘START/STOP’ button one more time to start cleaning.
Using the remote controller
After the Robot Cleaner is turned on press the ‘ ’ button on the remote controller. A melody will sound and cleaning will begin.
Press the button during the cleaning cycle to stop cleaning.
When the power is off, press the ‘Power’ button on the remote controller to turn the power on.
During cleaning, collisions can happen when the sensor cannot detect objects because of their shape (Thin chairs and table legs, furniture corner). When this happens, the internal impact detecting sensor will react by using a backward motion.
If the Robot Cleaner is set to start cleaning at a location away from the home station, put the Robot
Cleaner on a flat floor in order to prevent a malfunction of the obstacle detecting sensor. In addition, start cleaning from a location where there are no obstacles . For example, curtains or walls must be 30 cm from the Robot Cleaner.
Tip For best results:
•Briefly scan the area to be cleaned for big and small objects that will cause difficulty for the
Robot Cleaner.
•If cleaning is started when the Robot Cleaner is at the home station, the device can rapidly be returned to the home station as the current home position has been accurately read.
•When the mop plate is installed, to prevent a 2nd contamination from the contaminated mop, it will not go over door sills of 5 mm or higher.
17
How to charge the battery
Automatic charging
The Robot Cleaner returns to the home station at the end of a cleaning cycle or when its battery is running low.
If 10 minutes elapse without the Robot Cleaner moving or the battery is too low, the power will be automatically turned OFF.
Do NOT turn OFF the Main Power Switch as the battery will not be recharged. If the machine is returned manually with the Main Power Switch OFF, it announces an error message, "Main power switch on the back of the Roboking is turned off. Please turn the switch on."
In the event that the unit returns to the Home Station due to a low
battery during the cleaning, cleaning will be started, after recharging, from the nearest place of the area which has not been cleaned before. (Page 19)
If Robot Cleaner is unable to dock to the home station on its first attempt, it will try again until it docks successfully.
When Robot Cleaner has completed all areas that it can clean, it will return to the home station even when the battery level is not low.
Manual charging
You can manually charge the battery prior to using the Robot Cleaner for the first time or to charge the battery during cleaning.
Method 1. Attach the Robot Cleaner to the home
station by aligning to the front side of the
home station. A melody sound will be
generated along with an audio message to
start charging.
If a voice message, "Main power switch on the back of the Roboking is turned off. Please turn the switch on." is announced repeatedly, then turn on the Main Power Switch.
Method 2. When the 'HOME' button of the remote control or the Robot Cleaner is pressed, charging will be prompted by automatically generating a searching signal and returning the Robot Cleaner to the home station.
If the Robot Cleaner did not start cleaning from the home station or if the Robot Cleaner is manually charged by pressing the Home button, it may take slightly longer to find the home station.
If the Robot Cleaner is within 10 cm of the front of the charging terminal while the power is turned on from
Standby, it will automatically be returned to the home station and charging will begin.
Tip
18
Take the following precautions when using the home station:
•If foreign material is caught on the charging terminal, charging may not be activated. Wipe the terminal from time to time with a dry cloth after the power plug is disconnected.(p56)
•To prevent electric shock or damage to the home station, do not touch the charging terminal with any metallic objects.
•To avoid fire or electric shock, never disassemble or modify the home station.
• Do not to place the Robot cleaner, the home station or power plug near a heating source.
HOW TO CHARGE THE BATTERY
Remaining Battery Charge Indicator
The Battery level is indicated on the Status Display, as follows.
•If recharging is in progress, the Battery Level indicator flashes showing the battery charge status level.
•If recharging is complete, only the 'Battery' and 'Clean Mode' icons are displayed to save the energy.
•Upon the need for recharging, only the first level of the Battery charge level indicator will be on and flashing.
Flickering
Charging is required |
Low |
Middle |
High |
If Robot Cleaner goes back to the Home Station, in need of a charge during the cleaning mode, the Cleaning mode indicator will continue to flash during charging to indicate that cleaning was disrupted as the battery required charging.
-When the 'Clean Mode' lamp continues to flash after recharging is complete, Robot Cleaner will then resume cleaning the areas which were not previously completed.
-Pressing the 'Start' button on the Remote Controller or 'Start/Stop' button on main unit whilst it is recharging, with the 'Clean Mode' lamp flashing, will also manually force the Robot Cleaner to find and clean the uncovered areas.
-Pressing the "Start" button on the remote control or the "Start/Stop" button on the Robot Cleaner after the Charging has completed will make the Robot
Cleaner start to clean from the beginning again.
The status indicators show the different pending conditions during charging mode.
In the case of no existing area to be cleaned after charging.
In the case of an existing area that the Robot Cleaner will resume cleaning when charging has completed.
(flashing Cleaning indicator)
19
HOW TO CHARGE THE BATTERY
Energy Saving Charging Mode
You can recharge the battery with the Energy Saving mode, if you don't use the Robot Cleaner for a long period of time or overnight.
Step 1. Press the Power button on the remote. All functions of the
Robot Cleaner are turned off except the recharging mode.
After recharging is complete, press the Power button on the remote to use the Robot Cleaner.
If the Battery is Not Charging
Check 1:
If the battery is not charging even when the Robot Cleaner is attached to the home station, check the following items.
- Turn the power switch on the rear-left of the Robot Cleaner off once and then on again.
- Check the power lamp of the home station.
- Wipe the terminals on the home station with a dry cloth. (p56)
Power lamp
Charge terminal
20
Using Magnetic Wall Strips
Use a Magnetic Wall strip to block off areas the robot cleaner should not enter. The Magnetic Wall strip is only included with some models. To purchase a strip for use with a model that did not include one, or to purchase additional strips, visit the LG website at www.lg.com.
1. Use a Magnetic Wall strip to block off areas the robot cleaner should not enter.
Living room
Bathroom
Magnetic
Wall
Magnetic
Wall strip
2. Use the Magnetic Wall in areas where the robot cleaner could be damaged or could cause damage to objects.
Place the Magnetic Wall strip at least 6 inches (15 cm) away from the object.
Place the Magnetic Wall strips underneath the edges of carpets or mats you don't want cleaned.Do not overlap the ends of the Magnetic Wall strips.
Use the strips:
-Around stairs where the robot cleaner could fall
-Around lamps, plants, or other fragile items
-Around sofas, tables, chairs, or pet bowls to avoid scuffs and impacts
-Around tables, or thick carpets where the robot cleaner wheels could get stuck
|
6 inches |
6 inches |
(15 cm) |
|
|
(15 cm) |
|
Tip |
• You can cut the Magnetic Wall strip into shorter lengths. Make sure the Magnetic Wall strips |
|
form a continuous shape when surrounding an object. If the strips do not form a continuous |
|
line, the robot cleaner may have difficulty recognizing them. |
|
• Only use the Magnetic Wall strip provided with the product. Third-party magnetic strips may |
not be recognized by the robot cleaner.
• If necessary, use removable tape such as gaffer's tape or painter's tape to keep the Magnetic Wall strip in place.
• Do not install Magnetic Wall strips near products which are susceptible to magnetic fields, such as speakers, desktop computers or hard drives, laptops, and some electronics
including CRT TVs. |
21 |
|
Cleaning modes
Zigzag Cleaning
In ‘Zigzag’ mode, Robot Cleaner repeats a zigzag operation to clean each and every spot in the cleaning area.
If you need to quickly clean an area choose ‘Zigzag’ mode.
Press ‘Mode’ button on Remote Controller or main unit to select ‘Zigzag’ mode and press ‘ ’ button.
Factory release default setting is 'Zigzag'.
Cell by Cell Cleaning
In 'Cell by Cell' mode, Robot Cleaner cleans the area by dividing it into rectangular spaces.
For meticulous cleaning, select this mode.
Press ‘Mode’ button on Remote Controller to select
'Cell by Cell' mode and press ‘ ’ button.
The 1st stage:
The maximum outline of 3 m x 3 m of cleaning area will be cleaned. (The size of the outline may vary in accordance with the shape of the area to be cleaned.)
The 2nd stage:
The 2nd stage of Cell by Cell cleaning engages a
Zigzag mode automatically.
When the 1st, and 2nd stages are completed, the cleaned area will be cleaned again through the repetition of the above cleaning method as the device advances to the next part of cleaning area.
Tip • Once set up, the cleaning mode(Zigzag, Cell by Cell) setting will be maintained even after the power supply is turned off.
•During operation, if a mode change is required, press the button and then select the mode. Cleaning will then start from the beginning.
22
CLEANING MODES
My Space Cleaning
Pressing 'My Space' on the Remote Controller will set the My Space cleaning mode with a voice message. For cleaning of particular spaces, select this mode.
The 1st stage:
Use the Remote Controller to manually set the parameters of each cleaning block.
This cleaning mode will be accepted when the distance of the start and end position is less than 1 m in area.
My Space
The 2nd stage:
Pressing the ‘ ’ button will then make the Robot Cleaner clean the manually outlined area by itself.
Upon failure to correctly outline a zone, a voice will announce, which says "Area does not meet the specified conditions. Please continue to make specified area for cleaning process."
Use the Remote Controller to assign a zone, again.
Upon completion of cleaning for all selected areas, the Robot Cleaner will resume the cleaning mode (Zigzag or Cell by Cell) which it was last set to.
Tip • While recharging, you cannot activate ‘My Space’ mode.
• To change the cleaning mode while the Robot Cleaner is in operation, press button first then select a cleaning mode. The cleaning will then start from the begining.
23
Auxiliary cleaning modes
Manual Cleaning
By pressing a direction key on the Remote Controller, you can move the Robot Cleaner manually.
Robot Cleaner will clean the area, by pressing the forward/backward/left/right buttons accordingly on the keypad of the remote control.
While in 'Manual' mode, the robot cleaner will run into obstacles placed behind it if the backward key on the remote is pressed or held down.
Spot Cleaning
Is best used to clean certain parts of the house.
Press 'Mode’ button on the Remote Controller to select 'Spot' mode, which will then indicate on the Status Display, then press the button, then Robot Cleaner will start Spot cleaning an area of
1.5 m in diameter around it.
While recharging, 'Spot' cannot be selected.
It stops at the started position after completing the cleaning(takes 4~5 min.).
24
AUXILIARY CLEANING MODES
Turbo Mode
Pressing the 'Turbo' button on the Remote Controller or main unit will activate 'Turbo' mode, with a voice message.
While in 'Turbo' mode, pressing the same button will cancel 'Turbo' mode, with a voice message.
In 'Turbo' mode, Robot Cleaner runs more intensely for a powerful clean. Turbo mode will reduce the battery duration.
<Turbo Mode (Floor Master Function)>
‘Turbo mode’ will automatically operate when the Robot Cleaner cleans carpets.
Repeat Mode
Pressing 'Repeat' button on Remote Controller will activate 'Repeat' mode, with a voice message.
While in 'Repeat' mode, pressing the same button will cancel 'Repeat' mode, with a voice message.
In 'Repeat' mode, Robot Cleaner repeats the cleaning in progress.
Learning Mode
The Robot Cleaner is capable of memorising the cleaning environment through its Learning mode for an intelligent cleaning operation.
'Learning Mode' is available only when the machine starts cleaning from the Home Station.
Tip • Precautions with Smart Operation
- This Learning mode enables memorizing locations with obstacles to help bypass them.
Robot Cleaner memorizes every aspect of the environment it was subjected to from when it started cleaning from the Home Station to the moment it finishes its course.
- Robot Cleaner learns new conditions again when the location of Home Station has been changed.
- If the learning mode is accepted, a voice message will say "Environment has been studied by learning process."
25
Time setting
You can set or change the current time on the Robot Cleaner.
Pressing ‘Clock' button on the Remote Controller, when the Robot Cleaner is in standby mode, will start the clock setting mode.
Select by using ‘◄ ►’ buttons on the Remote Controller.
The function can be heard through the voice guide.
Flickering |
Set the hour by using ‘▲▼’ buttons on |
|
Remote Controller. |
Flickering |
Set the minutes using ‘▲▼’ buttons on |
|
Remote Controller. |
Flickering |
Set the AM/PM using ‘▲▼’ buttons on |
|
Remote Controller. |
|
Pressing ‘Clock’ or ‘ ’ button on |
|
Remote Controller will complete the |
|
time setting process. |
Tip • Any scheduled cleaning will be activated based on the time on the Robot Cleaner. You must set the clock before setting scheduled cleaning.
• If there is no input for 10 seconds, the clock setting is canceled.
26
Scheduled cleaning
You can schedule cleaning so that the Robot Cleaner starts cleaning at a scheduled time.
Pressing 'Schedule' button on Remote Controller, only when the Robot Cleaner is recharging, will start the scheduled cleaning setting.
Setting/Cancelling the schedule cleaning is only possible when the unit is recharging on the home station
|
Flickering |
Select ‘Once reservation’ or ‘Daily |
|
|
reservation’ option by using ‘▲▼’ |
|
|
buttons on Remote Controller. |
|
|
A voice message will confirm the |
|
|
schedule. |
|
|
Set the hour by using the ‘▲▼’ buttons |
Select a setting by using |
|
on Remote Controller. |
'◄ ►' buttons on Remote |
Flickering |
|
Controller. |
|
|
|
Flickering |
Set the minutes by using the ‘▲▼’ |
‘Once reservation’ |
|
buttons on Remote Controller. |
|
|
|
‘Daily reservation’ |
Flickering |
Set the AM/PM using the ‘▲▼’ buttons |
|
|
on Remote Controller. |
|
|
Pressing ‘Schedule’ or ‘ ’ button on |
|
|
Remote Controller will then complete |
|
|
the scheduling process. |
Tip • When the scheduled time comes up, Robot Cleaner will start cleaning by itself.
• Scheduled cleaning can only be set when the Robot Cleaner is recharging.
• While recharging, by pressing the 'Schedule' button on the Remote Controller for
3 seconds will cancel the set schedule.
• If there is no input when setting the schedule time within 10 seconds, the setting is canceled.
27