OWNER’S MANUAL
ROBOKING
Before using, please carefully read the Safety Precautions pages to allow for safe operation of the product. After reading this manual, please keep it in an easily accessible location.
VR626** Ser. VR647** Ser.
VR627** Ser. VR646** Ser.
www.lg.com
FEATURES
Corner Master
By having adopted a brand new concept design that is appropriate for walls, the Robot Cleaner's cleaning performance is incredibly efficient.
Learning Mode
The Robot Cleaner is capable of memorizing the cleaning environment via its Smart Operation feature for smarter cleaning.
Turbo Mode
In the Turbo mode, the Robot Cleaner operates the suction motor and the brushes at a greater speed giving cleaner results.
When selected, the "Turbo" mode is automatically activated on carpets, which enables the Robot Cleaner to run more efficiently.
Drawer Mop Plate (Option)
The "Drawer mop plate" makes it much easier for users to fit and remove the mop without having to turn over the device.
My Space Mode
By commanding it to clean a particular area, the Robot Cleaner quickly cleans that desired area.
Repeat Cleaning
The Robot Cleaner will continuously clean until the battery runs out.
Zigzag
Location Search Function
If the Robot Cleaner is moved from a spot while operating, the device will automatically search for the previous location and return to the spot from where it was interrupted.
CONTENTS
1 |
|
4 |
|
||
BEFORE USING |
ADDITIONAL INFORMATION |
||||
|
|
|
|
|
|
2~6 |
Safety precautions |
36~38 |
Troubleshooting |
||
7 |
Included with product |
39 |
Before you call for service |
||
8~9 |
Parts description |
5 |
|
||
10~11 |
Button functions |
|
|||
|
|
|
|||
12 |
Display status information |
REFERENCE |
|||
13 |
Before you start |
||||
|
|
|
|||
40 |
Product specifications |
||||
14 |
Overview |
||||
41 |
Reference items |
||||
|
|
2
METHOD OF USE
15How to install the home station
16How to turn the Robot Cleaner power supply on & off
17How to start and stop cleaning 18~19 How to charge the battery 20~21 Cleaning modes
22~23 Auxiliary cleaning modes
24Time setting
25Scheduled cleaning
26Mop cleaning (option)
27Location search function 28~29 Smart diagnosis
3
HANDLING METHOD AFTER USE
30Cleaning the dust bin
31Cleaning the dust bin filter
32Cleaning the brush
33Cleaning the sensor/charging terminal
34Cleaning the side brush
35Cleaning the ultra microfiber mop (option)
SAFETY PRECAUTIONS
The purpose of the safety precautions described below is for the user to use the product safely and correctly to prevent any unexpected risk of injury or damage.
Basic safety precautions
After reading this manual, please keep it in an easily accessible location.
WARNING CAUTION
This is the safety alert symbol. This symbol alerts you to potential hazards that can result in property damage and/or serious bodily harm or death.
Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
WARNING
1.This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
2.Children should be supervised to ensure that they do not play with the appliance.
3.If the supply cord is damaged, it must be replaced by LG Electronics Service Agent in order to avoid a hazard
4.This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance must not be made by children without supervision.
2
WARNING
For your safety, do not remove the battery from the Robot Cleaner. If you need to replace the battery of the Robot Cleaner, take it to the nearest authorized LG Electronics service center or dealer for assistance.
Failure to follow this warning can cause fire or product failure.
Make sure the power cord of the home station is not crushed under a heavy object or damaged by contact with sharp objects.
Failure to follow this warning can cause electric shock, fire or product failure. If the power cord is broken, do not plug it in. Take the product to an LG Electronics Authorised service repairer.
Do not place the home station and the Robot Cleaner near a heating device.
Doing so can cause product deformation, fire, or product failure.
Do not force the power plug to bend. Do not use the power
plug when it has been damaged or loosened.
Doing so can cause fire or product failure.
Do not touch the power plug with wet hands.
Doing so can cause electric shock.
SAFETY PRECAUTIONS
Never use the Robot Cleaner with a battery and/or home station from any other product than the Robot Cleaner.
Doing so can cause fire or product failure.
Do not use the Robot Cleaner when candles or fragile objects are placed on the floor.
Doing so can cause fire or product failure.
Always use a dedicated power outlet with a 10 amp rating.
If multiple appliances are connected to an outlet simultaneously, they can generate enough heat to cause a fire.
When pulling out the home station power plug, always pull it out by grabbing the plug, not the cord. When pulling out the power plug, do not to touch the prongs with your fingers.
Doing so can cause an electric shock.
Do not allow children or pets to play with or rest upon the Robot Cleaner at any time. Do not use the Robot Cleaner while an object is hanging from it.
Doing so can cause injury or product damage.
3
SAFETY PRECAUTIONS
WARNING
|
Do not spray or use |
|
inflammable materials, |
<![if ! IE]> <![endif]>Gasoline |
surfactants, or drinking water |
in the vicinity of the Robot |
|
|
Cleaner. |
Doing so can cause fire or product failure.
*Inflammable materials: gasoline, thinner, etc.
*Surfactant: detergent, articles for bath, etc.
Do not insert any part of the body, such as a hand or foot, below the brush or wheels of the Robot Cleaner while in use.
Doing so can cause injury or product damage.
Do not operate the Robot Cleaner on narrow and high furniture such as a wardrobe, refrigerator, desk, table, etc.
Doing so can cause injury, product failure or damage which is not covered by the warranty.
Do not activate the device on a floor that has more than a 10 degree incline.
The device may not work properly.
Turn the power supply off immediately if any abnormal sound, odor, or smoke is generated from the Robot Cleaner by removing it from the home station and turning off the main switch on the rear side of the unit.
Failure to do so can cause fire or product failure.
Do not operate the Robot Cleaner in a room where a child is sleeping.
Doing so can cause injury or product damage.
Do not leave Children or pets near the Robot Cleaner unsupervised.
Doing so can cause injury or product damage.
This product is intended for indoor domestic home use and should not be used in mobile applications. it should not be used in commercial applications such as workshops or garages or around indoor swimming pools, etc.
4
CAUTION
Frequently empty the dust bin and maintain its cleanliness.
The dust collected in the dust bin can trigger allergies and may contain harmful insects. it should be cleaned after each use.
Use the Robot Cleaner indoors only.
Using it outdoors can cause product failure and irreparable damage to the unit.
Close the cover of the dust bin on the main unit before starting cleaning.
If the cover is not closed, it can cause injury or product damage.
DO NOT use the Robot Cleaner around a banister, staircase or any other dangerous place.
Doing so could cause injury or damage to the unit.
In rare cases, the Robot Cleaner’s brush can damage carpet. If this happens, immediately stop the cleaning operation.
When a carpet has long tassels, the tassels can be damaged.
Do not let the main unit and charging terminal of the home station come into contact with metallic objects.
Doing so can cause product failure.
Do not put water, detergent, etc. into or onto the Robot Cleaner.
Doing so can cause product failure. Do not put any water or detergent on the Robot Cleaner. If liquids get inside of the Robot Cleaner, turn off the power supply and contact an LG Electronics sales agent or customer care center.
SAFETY PRECAUTIONS
Do not drop the Robot Cleaner or subject it to strong impacts.
Doing so can cause injury or product failure not covered by the warranty.
Do not expose the Robot Cleaner to cold temperatures
(less than -5 C) for a long period of time.
Doing so can cause product failure.
Remove any cables or string from the floor before starting.
Cable or string can get tangled in the wheels of Robot Cleaner and cause product failure or the cord of an appliance can be disconnected.
Make sure the Robot Cleaner is not put on a table or desk, with the power ON.
It may result in an injury or damage to the product.
Do not allow the Robot Cleaner to sweep up liquids, blades, thumb tacks, sharp objects or ashes, hot or cold. etc.
These items can cause product failure or damage.
Do not put sharp objects into the opening of the Robot Cleaner’s ultrasonic sensors.
Doing so can cause product failure.
Do not use the Robot Cleaner when the dust bin is completely full.
Doing so can cause product failure.
5
SAFETY PRECAUTIONS
CAUTION
If the floor is wet or has wet |
When the robot cleaner is |
|
spots, wipe them up before |
operating, it may hit the chair |
|
using the Robot Cleaner. Do |
leg, desk leg, table leg or other |
|
not use the Robot Cleaner on a |
narrow pieces of furniture. |
|
wet surface. |
For quicker and better cleaning, |
|
|
||
Doing so can cause product |
place the dining chairs on top |
|
failure. |
of the dining table. |
|
When attaching the mop, |
NOTE: Very low thresholds will |
|
ensure that it is fitted correctly |
allow the Robot cleaner to go |
|
so that it does not block the |
over them and perhaps into an |
|
lower camera sensor. |
undesirable location. Make sure |
|
Blocking the bottom camera |
that all the doors of the rooms |
|
that are not to be cleaned are |
||
sensor may not allow the |
||
closed. |
||
product to work correctly. |
||
|
||
To save energy when the |
|
|
Roboking is not in use for |
|
|
longer periods, turn off the |
|
|
power switch, and turn on the |
|
|
power switch again just prior to |
|
|
using the Robot cleaner again. |
|
Tip Check the following items before use:
•Empty the dust bin after each operation or prior to it filling up.
•Remove any cables or long strings from the floor.
•Remove any moisture from the floor before cleaning.
•Close the cover of the dust bin before cleaning.
•Remove fragile or unnecessary objects from the room to be cleaned.
For example, remove expensive ceramics and valuables from the floor.
•Confirm whether the battery has sufficient power, and if it is low, recharge it.
•Close the doors of any room that you do not want the Robot Cleaner to enter.
During cleaning, the Robot Cleaner may enter another room and continue cleaning.
•Do not use this product in the room where a child is sleeping alone. The child can be hurt or woken.
•Remove towels, foot towel or any other thin cloth from the floor as they can get caught by the brush.
•Before starting the device, it's better to remove carpets that are thicker than 20 mm as they may cause it to malfunction.
•Please close any balcony doors as the wheels may get stuck while cleaning.
6
INCLUDED WITH PRODUCT
Robot Cleaner
Remote controller |
Home station |
s Figures can be different from actual objects.
|
|
GUIDE RAPIDE |
|
|
|
ASPIRATEUR ROBOT |
|
|
|
Ce guide décrit brièvement comment utiliser l'aspirateur robot. |
|
|
|
Pour plus de détails, veuillez consulter le manuel de l'utilisateur.a |
|
|
|
Veuillez lire attentivement ce qui suit avant d'installer et de mettre en service le produit. |
|
|
|
www.lg.com |
|
Cleaning Tool |
Dust bin filter (spare) |
Quick guide |
Operation manual |
|
(option) |
|
|
for cleaning sensors
for cleaning |
|
|
the filter |
|
|
Cleaning brush |
Mop plate (option) |
Ultra microfiber mop |
(It’s on the dust bin cover) |
|
(2 pieces) (option) |
Batteries for remote controller |
Side brush (2 pieces) |
Carpet Master |
(2 units of AAA size) |
(option) |
(option) |
7
PARTS DESCRIPTION - ROBOT CLEANER
Plan view
Upper camera sensor
Dust bin cover
Display & function buttons
Dust bin compartment release button
Front view
Ultrasonic sensors
Obstacle detecting sensor window Detecting
sensors of home station & Receiving sensors of remote controller
Rear view
Main Power switch
Ventilation port
Bottom view
Cliff detection sensors
Side brush
Charging terminals
Brush
Wheel
Battery housing
Lower camera sensor
s Figures can be different from actual objects.
8
PART DESCRIPTION – HOME STATION / DUST BIN
Home station
Remote controller holder
Charging terminal
Power switch
Power cord fixing hook
Dust bin
Dust bin handle
Cleaning brush
Dust bin cover
Suction port flap
Sponge filter
Dust bin lid opening button
HEPA filter
Filter cover
s Figures can be different from actual objects.
9
BUTTON FUNCTIONS – ROBOT CLEANER
TURBO
START/STOP
MODE
HOME
BUTTON LOCK
On/Off
• If the button is pressed, ‘Turbo Mode’ will be set with a voice confirmation.
• If the button is pressed whilst in ‘Turbo Mode’, it will be canceled.
• Used to turn the power on from Standby, start or stop cleaning.
• If the button is pressed whilst the unit is powered ON, it will start cleaning.
• If button is pressed during the cleaning, it will stop the cleaning.
• If the button is pressed for about 2 sec. whilst the power is ON, the power will be returned to Standby.
• If the button is pressed in 'Smart Diagnosis' mode, it will end the diagnosis.
• Used to change the clean mode setting.
• If the machine is at the Home Station, ‘Spot Clean’ option is not available.
• The 'My Space' mode can only be selected by remote control (when the
Robot Cleaner is not on the home station).
• Used to return the Robot Cleaner back to the home station for charging.
• If cleaning is finished or the battery is low, the Robot Cleaner will return to the Home Station by itself to recharge its battery.
• Pressing the ‘Turbo' and 'Mode' button for 3 seconds will activate or deactivate the Lock function.
• If 'Lock' is ON, a voice announcement "Key lock has already been set" will be heard each time a button is pressed.
10
BUTTON FUNCTIONS – REMOTE CONTROLLER
Start
Pressing this button will start the cleaning. (p17)
Mode
Changes the cleaning mode. (p20)
Directional button
This button enables
Manual Operation and selection of an area in 'My
Space cleaning' mode.
Repeat
This button allows activating or deactivating 'Repeat Cleaning' mode. (p23)
Schedule
Used to start cleaning at a
scheduled time. Pressing the button for
3 sec. will cancel the scheduled cleaning.
Schedule Setting/Cancel options are available only in 'Charge' mode. (p25)
Clock
Used to set the current time indicated on the Robot Cleaner. (p24)
Home
Used to recharge the Robot
Cleaner by making it return to the
Home Station. (p18)
Turbo
Used to activate or deactivate 'Turbo' mode. (p23)
Stop/OK
Pressing the button will stop the Robot Cleaner, or confirm a
cleaning schedule or time setting.
My Space
Used to put the Robot Cleaner
in 'My Space clean' mode. (p21)
Mute
Used to activate or deactivate
'Mute' mode. (p12)
Diagnosis
Used to run Smart Diagnosis. Available only when Robot Cleaner is recharging. (p28)
Tip • Remote Controller does NOT provide a Power ON function.
• With the machine's power OFF, the Remote Controller will not work.
• To turn the power ON/OFF, use the 'Start/Stop' button on the upper section of the Robot Cleaner.
• The 'Mode', 'My Space' or 'Clock' button can only be used after stopping the Robot
Cleaner or whilst it is charging on the Home station.
11
DISPLAY STATUS INFORMATION
Lock icon
Indicates whether 'Lock‘ is activated or not.
Schedule icon
Indicates the status of
Schedule/'Once reservation', or 'Daily reservation' setting.
Repeat cleaning
Displayed if the machine is in 'Repeat Cleaning' mode.
Zigzag cleaning
This icon is displayed to indicate Robot Cleaner is working in a Zigzag Clean.
Cell by Cell cleaning
This icon is displayed to indicate Robot Cleaner is working in a Cell by Cell cleaning mode.
Mute icon
This icon indicates whether the Mute is ON or OFF.
Battery icon
This icon indicates the residual battery level, it flashes if the battery needs recharging.
AM/PM icon
This indicates a.m. or p.m. according to the clock setting.
|
|
Turbo icon |
|
|
This display |
|
|
illuminates if Turbo |
|
|
Mode is activated. |
|
|
|
|
|
Homing icon |
|
|
This icon is displayed |
|
|
if Robot Cleaner is in |
|
|
'Homing' mode. |
|
|
My Space cleaning |
|
|
Is displayed when the |
|
|
Robot Cleaner runs |
|
|
My Space cleaning |
|
|
mode. |
|
|
Spot cleaning |
Time display |
This icon appears |
|
This indicates the current |
when Spot cleaning |
|
and scheduled time. |
is selected. |
Tip • Once the clean mode is selected (Zigzag or Cell by Cell) it will be remembered even if the power is OFF.
•To cancel the reservation, please press the 'Schedule' button on the remote for 3 seconds while the Robot Cleaner is recharging.
12