LG VR6270LVMB, VR6271LVMB Owner’s Manual

OWNER’S MANUAL

CLEANING ROBOT

Before using, please carefully read the Safety Precautions pages to
allow for safe operation of the product. After reading the operation
manual, please keep it in an easily accessible location.

VR6260 Ser.
VR6270 Ser.

www.lg.com

FEATURES

Zigzag

Corner Master

By having adopted a brand new concept design that is appropriate for walls,
the Robot Cleaner's cleaning performance is incredibly efficient.

Learning Mode

The Robot Cleaner is capable of memorizing the cleaning environment via
its Smart Operation feature for smarter cleaning.

Turbo Mode

In the "Turbo" mode, the Robot Cleaner runs more powerful giving cleaner
results.
When selected, the "Turbo" mode is automatically activated on carpets,
which enables the Robot Cleaner to run more efficiently.

Drawer Mop Plate

The "Drawer mop plate" makes it much easier for users to change the mop
without having to flip the device over.

My Space Mode

By commanding it to clean a particular space, the Robot Cleaner quickly
cleans the desired space.

Repeat Cleaning

The Robot Cleaner will continuously clean until the battery runs out.

Location Search Function

When the Robot Cleaner is moved from a spot while operating, the device
will automatically search for the previous location and return to the spot from
where it was interrupted.

CONTENTS

1

BEFORE USING

Safety precautions

2~5

Included with product

6

Parts description

7~8

Button functions

9~10

Display status information

11

Before you start

12

Overview

13

2

METHOD OF USE

14

How to install the home station

15

How to turn the Robot Cleaner power supply on & off

16

How to start and stop cleaning

17~18

How to charge the battery

19~20

Cleaning modes

21~22

Auxiliary cleaning modes

23

Time setting

24

Scheduled cleaning

25

Mop cleaning (option)

26

Location search function

27~28

Smart diagnosis

4

ADDITIONAL INFORMATION

35~37

38

Troubleshooting

Before you call for service

5

REFERENCE

39

40

Product specifications

Open source software notice

3

HANDLING METHOD AFTER USE

29

Cleaning the dust bin

30

Cleaning the dust bin filter

31

Cleaning the brush

32

Cleaning the sensor/charging terminal

33

Cleaning the side brush

34

Cleaning the ultra microfiber mop (option)

2

SAFETY PRECAUTIONS

The purpose of the safety precautions described below is for the user to use the product safely and
correctly to prevent any unexpected risk of injury or damage.

Basic safety precautions

After reading this manual, please keep it in an easily accessible location.

This is the safety alert symbol. This symbol alerts you to potential hazards that can result in
property damage and/or serious bodily harm or death.

WARNING

CAUTION

Indicates a hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a hazardous situation which, if not avoided, could result in minor or moderate
injury.

WARNING

1. This appliance is not intended for use by persons
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction
concerning use of the appliance by a person responsible
for their safety.

2. Children should be supervised to ensure that they do

not play with the appliance.

3. If the supply cord is damaged, it must be replaced by

LG Electronics Service Agent in order to avoid a hazard

4. This appliance can be used by children aged from 8

years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way
and understand the hazards involved. Children shall not
play with the appliance. Cleaning and user maintenance
must not be made by children without supervision.

For your safety, do not remove the
battery from the Robot Cleaner. If
you need to replace the battery or the
Robot Cleaner, take it to the nearest
authorized LG Electronics service
center or dealer for assistance.

Failure to follow this warning can
cause fire or product failure.

Never use the Robot Cleaner with
a battery and/or home station from
any other product than the
Robot Cleaner.

Doing so can cause fire or product
failure.

3

WARNING

Gasoline

Detergent

SAFETY PRECAUTIONS

Make sure the power cord of the
home station is not crushed under a
heavy object or damaged by contact
with sharp objects.

Failure to follow this warning can cause
electric shock, fire or product failure.
If the power cord is broken, do not
plug it in. Take the product to an LG
Electronics Authorised service repairer.

Do not place the home station and
the Robot Cleaner near a heating
device.

Doing so can cause product
deformation, fire, or product failure.

Do not force the power plug to
bend. Do not use the power plug
when it has been damaged or
loosened.

Doing so can cause fire or product
failure.

Do not touch the power plug with
wet hands.

Doing so can cause electric shock.

Do not spray or use inflammable
materials, surfactants, or drinking water
in the vicinity of the Robot Cleaner.

Doing so can cause fire or product
failure.
* Inflammable materials: gasoline,

thinner, etc.

* Surfactant: detergent, articles for

bath, etc.

Do not insert any part of the body,
such as a hand or foot, below the
brush or wheels of the
Robot Cleaner while in use.

Doing so can cause injury or
product damage.

Do not use the Robot Cleaner when
candles or fragile objects are placed
on the floor.

Doing so can cause fire or product
failure.

Always use a dedicated power
outlet with a 10 amp rating.

If multiple appliances are connected
to an outlet simultaneously, they
can generate enough heat to cause
a fire.

When pulling out the home station
power plug, always pull it out by
grabbing the plug, not the cord. When
pulling out the power plug, do not to
touch the prongs with your fingers.

Doing so can cause an electric shock.

Do not allow children or pets to play
with or rest upon the Robot Cleaner
at any time. Do not use the Robot
Cleaner while an object is hanging
from it.

Doing so can cause injury or
product damage.

Turn the power supply off
immediately if any abnormal sound,
odor, or smoke is generated from
the Robot Cleaner by removing it
from the home station and turning
off the main switch on the rear side
of the unit.

Failure to do so can cause fire or
product failure.

Do not operate the Robot Cleaner
in a room where a child is sleeping.

Doing so can cause injury or
product damage.

Do not operate the Robot Cleaner
on narrow and high furniture such
as a wardrobe, refrigerator, desk,
table, etc.

Doing so can cause injury, product
failure or damage which is not
covered by the warranty.

Do not activate the device on a floor
that has more than a 10 degree
incline.

The device may not work properly.

This product is intended for indoor domestic home

use and should not be used in mobile applications. it
should not be used in commercial applications such as
workshops or garage, etc.

Do not leave Children or pets near
the Robot Cleaner unsupervised.

Doing so can cause injury or
product damage.

4

SAFETY PRECAUTIONS

CAUTION

Frequently empty the dust bin and
maintain its cleanliness.

The dust collected in the dust
bin can trigger allergies and may
contain harmful insects.

Use the Robot Cleaner indoors only.

Using it outdoors can cause product
failure and irreparable damage to
the unit.

Close the cover of the dust bin
on the main unit before starting
cleaning.

If the cover is not closed, it can
cause injury or product damage.

DO NOT use the Robot Cleaner
around a banister, staircase or any
other dangerous place.

Otherwise, the user or the product
can be exposed to damage.

Do not drop the Robot Cleaner or
subject it to strong impacts.

Doing so can cause injury or
product failure not covered by the
warranty.

Do not expose the Robot Cleaner to
cold temperatures (less than -5 C)
for a long period of time.

Doing so can cause product failure.

Remove any cables or string from
the floor before starting.

Cable or string can get tangled in
the wheels of Robot Cleaner and
cause product failure or the cord of
an appliance can be disconnected.

Make sure the Robot Cleaner is
not put on a table or desk, with the
power ON.

It may result in injury of the user or
damage in the product.

In rare cases, the Robot Cleaner’s
brush can damage the carpet. If
this happens, immediately stop the
cleaning operation.

When a carpet has long tassels, the
tassels can be damaged.

Do not let the main unit and
charging terminal of the home
station come into contact with
metallic objects.

Doing so can cause product failure.

Do not put water, detergent, etc.
into the Robot Cleaner.

Doing so can cause product failure.
Do not put any water or detergent
on the Robot Cleaner. If liquids get
inside of the Robot Cleaner, turn off
the power supply and contact an LG
Electronics sales agent or customer
care center.

Do not allow the Robot Cleaner to
sweep up liquids, blades, thumb
tacks, kindling, etc.

These items can cause product
failure.

Do not put sharp objects into the
opening of the Robot Cleaner’s
ultrasonic sensor.

Doing so can cause product failure.

Do not use the Robot Cleaner when
the dust bin is completely filled up.

Doing so can cause product failure.

5

CAUTION

SAFETY PRECAUTIONS

Tip

If the floor is wet or has wet spots,
wipe them up before using the
Robot Cleaner. Do not use the
Robot Cleaner on a wet surface.

Failure to do so can cause product
failure.

When attaching the mop, do not
block the bottom camera sensor.

Blocking the bottom camera sensor
may not allow the product to work
smoothly.

If you do not use it to save the
energy, turn off the power switch,
and turn on the power switch when
you are cleaning or recharging it.

When the robot cleaner is
operating, it may hit the chair leg,
desk leg, table leg or other narrow
pieces of furniture.

For quicker and better cleaning,
place the dining chairs on top of the
dining table.

Make sure the plate on the floor is
higher than 2 cm from the ground
before starting the cleaning.

If the threshold is low, the Robot
Cleaner can go over it and perhaps
into an undesirable location. Make
sure that all the doors of the rooms
that are not to be cleaned are closed.

Check the following items before use:

• Empty the dust bin after each operation or prior to it filling up.

• Remove any cables or long strings from the floor.

• Remove any moisture from the floor before cleaning.

• Close the cover of the dust bin before cleaning.

• Remove fragile or unnecessary objects from the room to be cleaned.

For example, remove expensive ceramics and valuables from the floor.

• Confirm whether the battery has sufficient power, and if it is low, recharge it.

• Close the doors of any room that you do not want the Robot Cleaner to enter.

During cleaning, the Robot Cleaner may enter another room and continue cleaning.

• Do not use this product in the room where a child is sleeping alone. The child can be hurt or

woken.

• Remove towels, foot towel or any other thin cloth from the floor as they can get caught by the

brush.

• Before starting the device, it's better to remove carpets that are thicker than 20 mm as they

may cause it to malfunction.

• Please close any balcony doors. The wheels may get stuck while cleaning.

6

INCLUDED WITH PRODUCT

www.lg.com

GUIDE RAPIDE

ASPIRATEUR ROBOT

Ce guide décrit brièvement comment utiliser l'aspirateur robot.
Pour plus de détails, veuillez consulter le manuel de l'utilisateur.a

Veuillez lire attentivement ce qui suit avant d'installer et de mettre en service le produit.

GUIDE D'UTILISATION

ASPIRATEUR ROBOT

Avant toute utilisation, lisez attentivement la rubrique "Précautions
relatives à la sécurité" pour le bon fonctionnement du produit.
Après avoir lu le manuel d'utilisation, conservez-le dans un endroit
facilement accessible à tout moment.

www.lg.com

Robot Cleaner

Remote controller

 Figures can be different from actual objects.

Cleaning Tool

for cleaning

sensors

for cleaning

the filter

Cleaning brush

(It’s on the dust bin cover)

Dust bin filter (spare)

(option)

Mop plate (option)

Home station

Quick guide Operation manual

Ultra microfiber mop

(2 pieces) (option)

Dry cell for remote controller

(2 units of AAA size)

Side brush (2 pieces)

(option)

Carpet Master

(option)

7

PARTS DESCRIPTION - ROBOT CLEANER

Plan view

Front view

Upper camera sensor

Dust bin cover

Display & Manipulation button

Dust bin cover button

Ultrasonic sensors

Obstacle detecting sensor window
Detecting sensors of home station &
Receiving sensors of remote controller

Rear view

Bottom view

Power switch

Ventilation port

Cliff detection sensor

Side brush

Charging terminal
Brush

Wheel

Battery

Lower camera sensor

 Figures can be different from actual objects.

8

PART DESCRIPTION – HOME STATION / DUST BIN

Home station

Remote controller holder

Charging terminal

Power switch

Dust bin

Dust bin cover

Suction port flap

Dust bin cover

opening button

Power cord fixing hook

Dust bin handle

Cleaning brush

Sponge filter

HEPA filter

 Figures can be different from actual objects.

Filter cover

9

BUTTON FUNCTIONS – ROBOT CLEANER

TURBO

START/STOP

MODE

HOME

BUTTON LOCK

On/Off

• If the button is pressed, ‘Turbo Mode’ will be set with a voice confirmation.

• If the button is pressed whilst in ‘Turbo Mode’, it will be canceled.

• Used to turn the power ON, start or stop cleaning.

• If the button is pressed whilst the unit is powered ON, it will start cleaning.

• If button is pressed during the cleaning, it will stop the cleaning.

• If the button is pressed for about 2 sec. whilst the power is ON, the power will be

OFF.

• If the button is pressed in 'Smart Diagnosis' mode, it will end the diagnosis.

• Used to change the clean mode setting.

• If the machine is at the Home Station, ‘Spot Clean’ option is not available.

• The 'My Space' mode can only be selected by remote control (when the Robot

Cleaner is not on the home station).

• Used to return the Robot Cleaner back to the home station for charging.

• If cleaning is finished or the battery is low, the Robot Cleaner will return to the

Home Station by itself to recharge its battery.

• Pressing the ‘Turbo' and 'Mode' button for 3 seconds will activate or deactivate

the Lock function.

• If 'Lock' is ON, a voice announcement "Key has been locked" will be heard each

time a button is pressed.

10

BUTTON FUNCTIONS – REMOTE CONTROLLER

Start

Pressing this button will
start the cleaning. (p16)

Mode

Change the cleaning mode.
(p19)

Directional button

This button enables Manual
Operation and selection
of an area in 'My Space
cleaning' mode.

Repeat

This button allows activating
or deactivating 'Repeat
Cleaning' mode. (p22)

Schedule

Used to start cleaning at a
scheduled time.
Pressing the button for
3 sec. will cancel the scheduled
cleaning.

Schedule Setting/Cancel

※

options are available only in
'Charge' mode. (p24)

Clock

Used to set the current
time indicated on the Robot
Cleaner. (p23)

Home

Used to recharge the Robot Cleaner by
making it return to the Home Station. (p17)

Turbo

Used to activate or deactivate
'Turbo' mode. (p22)

Stop

Pressing the button will stop the
Robot Cleaner, or cancel a cleaning
schedule or time setting.

My Space

Used to put the Robot Cleaner in
'My Space clean' mode. (p20)

Mute

Used to activate or deactivate
'Mute' mode. (p11)

Diagnosis

Used to run Smart Diagnosis.
Available only when Robot Cleaner
is recharging. (p27)

Tip

• Remote Controller does NOT provide a Power ON function.

• With the machine's power OFF, the Remote Controller will not work.

• To turn the power ON/OFF, use the 'Start/Stop' button on the upper section of

the Robot Cleaner.

• Only use the 'Mode', 'My Space' or 'Clock' button after stopping Robot Cleaner.

11

Lock icon

Indicates whether 'Lock‘ is

activated or not.

Schedule icon

Indicates
the status of
Schedule/'One
time', or
'Everyday' setting.

Repeat cleaning

Displayed if the
machine is in 'Repeat
Cleaning' mode.

Zigzag cleaning

This icon is displayed to
indicate Robot Cleaner is

working in a Zigzag Clean.

Cell by Cell cleaning

This icon is displayed to indicate
Robot Cleaner is working in a
Cell by Cell cleaning mode.

DISPLAY STATUS INFORMATION

Mute icon

This icon indicates
whether the Mute is
ON or OFF.

Battery icon

This icon indicates the
residual battery level,
it flickers if the battery
needs recharging.

AM/PM icon

This indicates whether it's
a.m. or p.m. according to
the clock setting.

Turbo icon

This display is ON
if Turbo Mode is
activated.

Homing icon

This icon is displayed
if Robot Cleaner is in
'Homing' mode.

My Space cleaning

Displayed when the
Robot Cleaner runs
My Space clean.

Time display

This indicates the current and
scheduled time.

Spot cleaning

This icon appears
when Robot cleaner
starts Spot cleaning.

Tip

• Once the clean mode is selected (Zigzag or Cell by Cell) it will be remembered even if the

power is OFF.

• To cancel the reservation, please press the 'Schedule' button on the remote for 3 seconds
while the Robot Cleaner is recharging.

12

BEFORE YOU START

–

+

+

–

+

+

–

Check these items before cleaning

• Do not use this device in a room where a child is left alone. The child could be injured.

• Remove fragile or unnecessary objects from the room to be cleaned.

Especially, remove expensive ceramics and valuables from the floor.

• Close the cover of the dust bin before cleaning.

• Remove any moisture that might be on the floor.

• Remove cables, strips, towels, mats etc. from the floor so they will not get caught by the brush.

• Confirm whether the battery charge is sufficient, and if it is low, recharge it.

• Empty the dust bin before or after each clean, or before it becomes full.

• Close the doors of any room that you do not want the Robot Cleaner to enter. During cleaning,

the Robot Cleaner may enter another room and continue cleaning.

• When the mop is attached, Robot Cleaner will not be able to go over thresholds of 5 mm or higher.

If you are not planning to use the mop for cleaning, separate the mop before using Robot Cleaner.

• Before starting the device, it's better to remove carpets that are thicker than 20 mm as they may cause it

to malfunction.

• Please close any balcony doors. The wheels may get stuck while cleaning.

Loading the remote controller battery

1. Open the battery cover by lifting the rear hook of the remote controller.

2. Insert two AAA batteries, checking for +, - nodes while loading.

3. Close the battery cover completely so that the batteries will not fall out.

Precautions while using the remote control

• Only press one button at a time.

• Do not drop or subject it to forceful impact.

• Do not store it near devices that give off heat, fire or hot air.

• Certain fluorescent lamps, such as the three band radiation lamp, can interfere with the activation of the

remote control. Therefore, use it as far away as possible from such lamps.

• If the remote control is far from the Robot Cleaner when activated, it may fail to operate properly. Use the

device within 3 m of the Robot Cleaner if possible.