LG VR62601LV, VR62701LVMB, VR62701LVB Owner's Manual

OWNER’S MANUAL

CLEANING ROBOT

Before using, please carefully read the Safety Precautions pages to allow for safe operation of the product. After reading the operation manual, please keep it in an easily accessible location.

VR6260 Ser. VR6270 Ser.

www.lg.com

FEATURES

Zigzag

Corner Master

By having adopted a brand new concept design that is appropriate for walls, the Robot Cleaner's cleaning performance is incredibly efﬁcient.

Learning Mode

The Robot Cleaner is capable of memorizing the cleaning environment via its Smart Operation feature for smarter cleaning.

Turbo Mode

In the "Turbo" mode, the Robot Cleaner runs more powerful giving cleaner results. When selected, the "Turbo" mode is automatically activated on carpets, which enables the Robot Cleaner to run more efﬁciently.

Drawer Mop Plate

The "Drawer mop plate" makes it much easier for users to change the mop without having to ﬂip the device over.

My Space Mode

By commanding it to clean a particular space, the Robot Cleaner quickly cleans the desired space.

Repeat Cleaning

The Robot Cleaner will continuously clean until the battery runs out.

Location Search Function

When the Robot Cleaner is moved from a spot while operating, the device will automatically search for the previous location and return to the spot from where it was interrupted.

CONTENTS

BEFORE USING

Safety precautions

2~5

Included with product

Parts description

7~8

Button functions

9~10

Display status information

Before you start

Overview

METHOD OF USE

How to install the home station

How to turn the Robot Cleaner power supply on & off

How to start and stop cleaning

17~18

How to charge the battery

19~20

Cleaning modes

21~22

Auxiliary cleaning modes

Time setting

Scheduled cleaning

Mop cleaning (option)

Location search function

27~28

Smart diagnosis

ADDITIONAL INFORMATION

35~37

Troubleshooting

Before you call for service

REFERENCE

Product speciﬁcations

Reference items

HANDLING METHOD AFTER USE

Cleaning the dust bin

Cleaning the dust bin ﬁlter

Cleaning the brush

Cleaning the sensor/charging terminal

Cleaning the side brush

Cleaning the ultra microﬁber mop (option)

SAFETY PRECAUTIONS

The purpose of the safety precautions described below is for the user to use the product safely and correctly to prevent any unexpected risk of injury or damage.

Basic safety precautions

After reading this manual, please keep it in an easily accessible location.

This is the safety alert symbol. This symbol alerts you to potential hazards that can result in property damage and/or serious bodily harm or death.

WARNING

CAUTION

Indicates a hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.

WARNING

1. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

2. Children should be supervised to ensure that they do

not play with the appliance.

3. If the supply cord is damaged, it must be replaced by

LG Electronics Service Agent in order to avoid a hazard

4. This appliance can be used by children aged from 8

years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance must not be made by children without supervision.

For your safety, do not remove the battery from the Robot Cleaner. If you need to replace the battery or the Robot Cleaner, take it to the nearest authorized LG Electronics service center or dealer for assistance.

Failure to follow this warning can cause ﬁre or product failure.

Never use the Robot Cleaner with a battery and/or home station from any other product than the Robot Cleaner.

Doing so can cause ﬁre or product failure.

WARNING

Gasoline

Detergent

SAFETY PRECAUTIONS

Make sure the power cord of the home station is not crushed under a heavy object or damaged by contact with sharp objects.

Failure to follow this warning can cause electric shock, ﬁre or product failure. If the power cord is broken, do not plug it in. Take the product to an LG Electronics Authorised service repairer.

Do not place the home station and the Robot Cleaner near a heating device.

Doing so can cause product deformation, ﬁre, or product failure.

Do not force the power plug to bend. Do not use the power plug when it has been damaged or loosened.

Doing so can cause ﬁre or product failure.

Do not touch the power plug with wet hands.

Doing so can cause electric shock.

Do not spray or use inﬂammable materials, surfactants, or drinking water in the vicinity of the Robot Cleaner.

Doing so can cause ﬁre or product failure. * Inﬂammable materials: gasoline,

thinner, etc.

* Surfactant: detergent, articles for

bath, etc.

Do not insert any part of the body, such as a hand or foot, below the brush or wheels of the Robot Cleaner while in use.

Doing so can cause injury or product damage.

Do not use the Robot Cleaner when candles or fragile objects are placed on the ﬂoor.

Doing so can cause ﬁre or product failure.

Always use a dedicated power outlet with a 10 amp rating.

If multiple appliances are connected to an outlet simultaneously, they can generate enough heat to cause a ﬁre.

When pulling out the home station power plug, always pull it out by grabbing the plug, not the cord. When pulling out the power plug, do not to touch the prongs with your ﬁngers.

Doing so can cause an electric shock.

Do not allow children or pets to play with or rest upon the Robot Cleaner at any time. Do not use the Robot Cleaner while an object is hanging from it.

Doing so can cause injury or product damage.

Turn the power supply off immediately if any abnormal sound, odor, or smoke is generated from the Robot Cleaner by removing it from the home station and turning off the main switch on the rear side of the unit.

Failure to do so can cause ﬁre or product failure.

Do not operate the Robot Cleaner in a room where a child is sleeping.

Doing so can cause injury or product damage.

Do not operate the Robot Cleaner on narrow and high furniture such as a wardrobe, refrigerator, desk, table, etc.

Doing so can cause injury, product failure or damage which is not covered by the warranty.

Do not activate the device on a ﬂoor that has more than a 10 degree incline.

The device may not work properly.

This product is intended for indoor domestic home

use and should not be used in mobile applications. it should not be used in commercial applications such as workshops or garage, etc.

Do not leave Children or pets near the Robot Cleaner unsupervised.

Doing so can cause injury or product damage.

SAFETY PRECAUTIONS

CAUTION

Frequently empty the dust bin and maintain its cleanliness.

The dust collected in the dust bin can trigger allergies and may contain harmful insects.

Use the Robot Cleaner indoors only.

Using it outdoors can cause product failure and irreparable damage to the unit.

Close the cover of the dust bin on the main unit before starting cleaning.

If the cover is not closed, it can cause injury or product damage.

DO NOT use the Robot Cleaner around a banister, staircase or any other dangerous place.

Otherwise, the user or the product can be exposed to damage.

Do not drop the Robot Cleaner or subject it to strong impacts.

Doing so can cause injury or product failure not covered by the warranty.

Do not expose the Robot Cleaner to cold temperatures (less than -5 C) for a long period of time.

Doing so can cause product failure.

Remove any cables or string from the ﬂoor before starting.

Cable or string can get tangled in the wheels of Robot Cleaner and cause product failure or the cord of an appliance can be disconnected.

Make sure the Robot Cleaner is not put on a table or desk, with the power ON.

It may result in injury of the user or damage in the product.

In rare cases, the Robot Cleaner’s brush can damage the carpet. If this happens, immediately stop the cleaning operation.

When a carpet has long tassels, the tassels can be damaged.

Do not let the main unit and charging terminal of the home station come into contact with metallic objects.

Doing so can cause product failure.

Do not put water, detergent, etc. into the Robot Cleaner.

Doing so can cause product failure. Do not put any water or detergent on the Robot Cleaner. If liquids get inside of the Robot Cleaner, turn off the power supply and contact an LG Electronics sales agent or customer care center.

Do not allow the Robot Cleaner to sweep up liquids, blades, thumb tacks, kindling, etc.

These items can cause product failure.

Do not put sharp objects into the opening of the Robot Cleaner’s ultrasonic sensor.

Doing so can cause product failure.

Do not use the Robot Cleaner when the dust bin is completely ﬁlled up.

Doing so can cause product failure.

CAUTION

SAFETY PRECAUTIONS

Tip

If the ﬂoor is wet or has wet spots, wipe them up before using the Robot Cleaner. Do not use the Robot Cleaner on a wet surface.

Failure to do so can cause product failure.

When attaching the mop, do not block the bottom camera sensor.

Blocking the bottom camera sensor may not allow the product to work smoothly.

If you do not use it to save the energy, turn off the power switch, and turn on the power switch when you are cleaning or recharging it.

When the robot cleaner is operating, it may hit the chair leg, desk leg, table leg or other narrow pieces of furniture.

For quicker and better cleaning, place the dining chairs on top of the dining table.

Make sure the plate on the ﬂoor is higher than 2 cm from the ground before starting the cleaning.

If the threshold is low, the Robot Cleaner can go over it and perhaps into an undesirable location. Make sure that all the doors of the rooms that are not to be cleaned are closed.

Check the following items before use:

• Empty the dust bin after each operation or prior to it filling up.

• Remove any cables or long strings from the floor.

• Remove any moisture from the floor before cleaning.

• Close the cover of the dust bin before cleaning.

• Remove fragile or unnecessary objects from the room to be cleaned.

For example, remove expensive ceramics and valuables from the floor.

• Confirm whether the battery has sufficient power, and if it is low, recharge it.

• Close the doors of any room that you do not want the Robot Cleaner to enter.

During cleaning, the Robot Cleaner may enter another room and continue cleaning.

• Do not use this product in the room where a child is sleeping alone. The child can be hurt or

woken.

• Remove towels, foot towel or any other thin cloth from the floor as they can get caught by the

brush.

• Before starting the device, it's better to remove carpets that are thicker than 20 mm as they

may cause it to malfunction.

• Please close any balcony doors. The wheels may get stuck while cleaning.

INCLUDED WITH PRODUCT

www.lg.com

Quick Guide

Cleaning Robot

This guide brieﬂy describes how to use the Cleaning Robot. For more detail, please refer to the user manual.

Please read this manual carefully before installing and operating the product.

OWNER’S MANUAL

CLEANING ROBOT

Before using, please carefully read the Safety Precautions pages to allow for safe operation of the product. After reading the operation manual, please keep it in an easily accessible location.

www.lg.com

Robot Cleaner

Remote controller

 Figures can be different from actual objects.

Cleaning Tool

for cleaning

sensors

for cleaning

the ﬁlter

Cleaning brush

(It’s on the dust bin cover)

Dust bin ﬁlter (spare)

(option)

Mop plate (option)

Home station

Quick guide Operation manual

Ultra microﬁber mop

(2 pieces) (option)

Dry cell for remote controller

(2 units of AAA size)

Side brush (2 pieces)

(option)

Carpet Master

(option)

PARTS DESCRIPTION - ROBOT CLEANER

Plan view

Front view

Upper camera sensor

Dust bin cover

Display & Manipulation button

Dust bin cover button

Ultrasonic sensors

Obstacle detecting sensor window Detecting sensors of home station & Receiving sensors of remote controller

Rear view

Bottom view

Power switch

Ventilation port

Cliff detection sensor

Side brush

Charging terminal Brush

Wheel

Battery

Lower camera sensor

 Figures can be different from actual objects.

PART DESCRIPTION – HOME STATION / DUST BIN

Home station

Remote controller holder

Charging terminal

Power switch

Dust bin

Dust bin cover

Suction port ﬂap

Dust bin cover

opening button

Power cord ﬁxing hook

Dust bin handle

Cleaning brush

Sponge ﬁlter

HEPA ﬁlter

 Figures can be different from actual objects.

Filter cover

BUTTON FUNCTIONS – ROBOT CLEANER

TURBO

START/STOP

MODE

HOME

BUTTON LOCK

On/Off

• If the button is pressed, ‘Turbo Mode’ will be set with a voice confirmation.

• If the button is pressed whilst in ‘Turbo Mode’, it will be canceled.

• Used to turn the power ON, start or stop cleaning.

• If the button is pressed whilst the unit is powered ON, it will start cleaning.

• If button is pressed during the cleaning, it will stop the cleaning.

• If the button is pressed for about 2 sec. whilst the power is ON, the power will be

OFF.

• If the button is pressed in 'Smart Diagnosis' mode, it will end the diagnosis.

• Used to change the clean mode setting.

• If the machine is at the Home Station, ‘Spot Clean’ option is not available.

• The 'My Space' mode can only be selected by remote control (when the Robot

Cleaner is not on the home station).

• Used to return the Robot Cleaner back to the home station for charging.

• If cleaning is finished or the battery is low, the Robot Cleaner will return to the

Home Station by itself to recharge its battery.

• Pressing the ‘Turbo' and 'Mode' button for 3 seconds will activate or deactivate

the Lock function.

• If 'Lock' is ON, a voice announcement "Key has been locked" will be heard each

time a button is pressed.

BUTTON FUNCTIONS – REMOTE CONTROLLER

Start

Pressing this button will start the cleaning. (p16)

Mode

Change the cleaning mode. (p19)

Directional button

This button enables Manual Operation and selection of an area in 'My Space cleaning' mode.

Repeat

This button allows activating or deactivating 'Repeat Cleaning' mode. (p22)

Schedule

Used to start cleaning at a scheduled time. Pressing the button for 3 sec. will cancel the scheduled cleaning.

Schedule Setting/Cancel

※

options are available only in 'Charge' mode. (p24)

Clock

Used to set the current time indicated on the Robot Cleaner. (p23)

Home

Used to recharge the Robot Cleaner by making it return to the Home Station. (p17)

Turbo

Used to activate or deactivate 'Turbo' mode. (p22)

Stop

Pressing the button will stop the Robot Cleaner, or cancel a cleaning schedule or time setting.

My Space

Used to put the Robot Cleaner in 'My Space clean' mode. (p20)

Mute

Used to activate or deactivate 'Mute' mode. (p11)

Diagnosis

Used to run Smart Diagnosis. Available only when Robot Cleaner is recharging. (p27)

Tip

• Remote Controller does NOT provide a Power ON function.

• With the machine's power OFF, the Remote Controller will not work.

• To turn the power ON/OFF, use the 'Start/Stop' button on the upper section of

the Robot Cleaner.

• Only use the 'Mode', 'My Space' or 'Clock' button after stopping Robot Cleaner.

Lock icon

Indicates whether 'Lock‘ is

activated or not.

Schedule icon

Indicates the status of Schedule/'One time', or 'Everyday' setting.

Repeat cleaning

Displayed if the machine is in 'Repeat Cleaning' mode.

Zigzag cleaning

This icon is displayed to indicate Robot Cleaner is

working in a Zigzag Clean.

Cell by Cell cleaning

This icon is displayed to indicate Robot Cleaner is working in a Cell by Cell cleaning mode.

DISPLAY STATUS INFORMATION

Mute icon

This icon indicates whether the Mute is ON or OFF.

Battery icon

This icon indicates the residual battery level, it ﬂickers if the battery needs recharging.

AM/PM icon

This indicates whether it's a.m. or p.m. according to the clock setting.

Turbo icon

This display is ON if Turbo Mode is activated.

Homing icon

This icon is displayed if Robot Cleaner is in 'Homing' mode.

My Space cleaning

Displayed when the Robot Cleaner runs My Space clean.

Time display

This indicates the current and scheduled time.

Spot cleaning

This icon appears when Robot cleaner starts Spot cleaning.

Tip

• Once the clean mode is selected (Zigzag or Cell by Cell) it will be remembered even if the

power is OFF.

• To cancel the reservation, please press the 'Schedule' button on the remote for 3 seconds while the Robot Cleaner is recharging.

BEFORE YOU START

–

Check these items before cleaning

• Do not use this device in a room where a child is left alone. The child could be injured.

• Remove fragile or unnecessary objects from the room to be cleaned.

Especially, remove expensive ceramics and valuables from the floor.

• Close the cover of the dust bin before cleaning.

• Remove any moisture that might be on the floor.

• Remove cables, strips, towels, mats etc. from the floor so they will not get caught by the brush.

• Confirm whether the battery charge is sufficient, and if it is low, recharge it.

• Empty the dust bin before or after each clean, or before it becomes full.

• Close the doors of any room that you do not want the Robot Cleaner to enter. During cleaning,

the Robot Cleaner may enter another room and continue cleaning.

• When the mop is attached, Robot Cleaner will not be able to go over thresholds of 5 mm or higher.

If you are not planning to use the mop for cleaning, separate the mop before using Robot Cleaner.

• Before starting the device, it's better to remove carpets that are thicker than 20 mm as they may cause it

to malfunction.

• Please close any balcony doors. The wheels may get stuck while cleaning.

Loading the remote controller battery

1. Open the battery cover by lifting the rear hook of the remote controller.

2. Insert two AAA batteries, checking for +, - nodes while loading.

3. Close the battery cover completely so that the batteries will not fall out.

Precautions while using the remote control

• Only press one button at a time.

• Do not drop or subject it to forceful impact.

• Do not store it near devices that give off heat, fire or hot air.

• Certain fluorescent lamps, such as the three band radiation lamp, can interfere with the activation of the

remote control. Therefore, use it as far away as possible from such lamps.

• If the remote control is far from the Robot Cleaner when activated, it may fail to operate properly. Use the

device within 3 m of the Robot Cleaner if possible.

+ 30 hidden pages