LG VR6260, VR6270 Operating Instructions

ENGLISH

CZECH

SLOVENSKÝ

OWNER’S MANUAL

CLEANING ROBOT

Before using, please carefully read the Safety Precautions pages to allow for safe operation of the product. After reading the operation manual, please keep it in an easily accessible location.

VR6260 Ser. VR6270 Ser.

www.lg.com

FEATURES

Corner Master

By having adopted a brand new concept design that is appropriate for walls, the Robot Cleaner's cleaning performance is incredibly efﬁ cient.

Learning Mode

The Robot Cleaner is capable of memorizing the cleaning environment via its Smart Operation feature for smarter cleaning.

Turbo Mode

In the "Turbo" mode, the Robot Cleaner runs more powerful giving cleaner results. When selected, the "Turbo" mode is automatically activated on carpets, which enables the Robot Cleaner to run more efﬁ ciently.

Drawer Mop Plate

The "Drawer mop plate" makes it much easier for users to change the mop without having to ﬂ ip the device over.

My Space Mode

By commanding it to clean a particular space, the Robot Cleaner quickly cleans the desired space.

Repeat Cleaning

The Robot Cleaner will continuously clean until the battery runs out.

Location Search Function

When the Robot Cleaner is moved from a spot while operating, the device will automatically search for the previous location and return to the spot from where it was interrupted.

CONTENTS

ENGLISH

BEFORE USING

Safety precautions

2~5

Included with product

Parts description

7~8

Button functions

9~10

Display status information

Before you start

Overview

METHOD OF USE

How to install the home station

How to turn the Robot Cleaner power supply on & off

How to start and stop cleaning

17~18

How to charge the battery

19~20

Cleaning modes

21~22

Auxiliary cleaning modes

Time setting

Scheduled cleaning

Mop cleaning (option)

Location search function

27~28

Smart diagnosis

ADDITIONAL INFORMATION

35~37 38

Troubleshooting Before you call for service

REFERENCE

39 40

Product speciﬁ cations Reference items

HANDLING METHOD AFTER USE

Cleaning the dust bin

Cleaning the dust bin ﬁ lter

Cleaning the brush

Cleaning the sensor/charging terminal

Cleaning the side brush

Cleaning the ultra microﬁ ber mop (option)

SAFETY PRECAUTIONS

The purpose of the safety precautions described below is for the user to use the product safely and correctly to prevent any unexpected risk of injury or damage.

Basic safety precautions

After reading this manual, please keep it in an easily accessible location.

This is the safety alert symbol. This symbol alerts you to potential hazards that can result in property damage and/or serious bodily harm or death.

WARNING CAUTION

Indicates a hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.

WARNING

1. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

2. Children should be supervised to ensure that they do

not play with the appliance.

3. If the supply cord is damaged, it must be replaced by

LG Electronics Service Agent in order to avoid a hazard

4. This appliance can be used by children aged from 8

years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance must not be made by children without supervision.

For your safety, do not remove the battery from the Robot Cleaner. If you need to replace the battery or the Robot Cleaner, take it to the nearest authorized LG Electronics service center or dealer for assistance.

Failure to follow this warning can cause ﬁ re or product failure.

Never use the Robot Cleaner with a battery and/or home station from any other product than the Robot Cleaner.

Doing so can cause ﬁ re or product failure.

WARNING

Gasoline

Detergent

SAFETY PRECAUTIONS

ENGLISH

Make sure the power cord of the home station is not crushed under a heavy object or damaged by contact with sharp objects.

Failure to follow this warning can cause electric shock, ﬁ re or product failure. If the power cord is broken, do not plug it in. Take the product to an LG Electronics Authorised service repairer.

Do not place the home station and the Robot Cleaner near a heating device.

Doing so can cause product deformation, ﬁ re, or product failure.

Do not force the power plug to bend. Do not use the power plug when it has been damaged or loosened.

Doing so can cause ﬁ re or product failure.

Do not touch the power plug with wet hands.

Doing so can cause electric shock.

Do not spray or use inﬂ ammable materials, surfactants, or drinking water in the vicinity of the Robot Cleaner.

Doing so can cause ﬁ re or product failure. * Inﬂ ammable materials: gasoline,

thinner, etc.

* Surfactant: detergent, articles for

bath, etc.

Do not insert any part of the body, such as a hand or foot, below the brush or wheels of the Robot Cleaner while in use.

Doing so can cause injury or product damage.

Do not use the Robot Cleaner when candles or fragile objects are placed on the ﬂ oor.

Doing so can cause ﬁ re or product failure.

Always use a dedicated power outlet with a 10 amp rating.

If multiple appliances are connected to an outlet simultaneously, they can generate enough heat to cause a ﬁ re.

When pulling out the home station power plug, always pull it out by grabbing the plug, not the cord. When pulling out the power plug, do not to touch the prongs with your ﬁ ngers.

Doing so can cause an electric shock.

Do not allow children or pets to play with or rest upon the Robot Cleaner at any time. Do not use the Robot Cleaner while an object is hanging from it.

Doing so can cause injury or product damage.

Turn the power supply off immediately if any abnormal sound, odor, or smoke is generated from the Robot Cleaner by removing it from the home station and turning off the main switch on the rear side of the unit.

Failure to do so can cause ﬁ re or product failure.

Do not operate the Robot Cleaner in a room where a child is sleeping.

Doing so can cause injury or product damage.

Do not operate the Robot Cleaner on narrow and high furniture such as a wardrobe, refrigerator, desk, table, etc.

Doing so can cause injury, product failure or damage which is not covered by the warranty.

Do not activate the device on a ﬂ oor that has more than a 10 degree incline.

The device may not work properly.

Do not leave Children or pets near the Robot Cleaner unsupervised.

Doing so can cause injury or product damage.

This product is intended for indoor domestic home

use and should not be used in mobile applications. it should not be used in commercial applications such as workshops or garage, etc.

SAFETY PRECAUTIONS

CAUTION

Frequently empty the dust bin and maintain its cleanliness.

The dust collected in the dust bin can trigger allergies and may contain harmful insects.

Use the Robot Cleaner indoors only.

Using it outdoors can cause product failure and irreparable damage to the unit.

Close the cover of the dust bin on the main unit before starting cleaning.

If the cover is not closed, it can cause injury or product damage.

DO NOT use the Robot Cleaner around a banister, staircase or any other dangerous place.

Otherwise, the user or the product can be exposed to damage.

Do not drop the Robot Cleaner or subject it to strong impacts.

Doing so can cause injury or product failure not covered by the warranty.

Do not expose the Robot Cleaner to cold temperatures (less than -5 ) for a long period of time.

Doing so can cause product failure.

Remove any cables or string from the ﬂ oor before starting.

Cable or string can get tangled in the wheels of Robot Cleaner and cause product failure or the cord of an appliance can be disconnected.

Make sure the Robot Cleaner is not put on a table or desk, with the power ON.

It may result in injury of the user or damage in the product.

In rare cases, the Robot Cleaner’s brush can damage the carpet. If this happens, immediately stop the cleaning operation.

When a carpet has long tassels, the tassels can be damaged.

Do not let the main unit and charging terminal of the home station come into contact with metallic objects.

Doing so can cause product failure.

Do not put water, detergent, etc. into the Robot Cleaner.

Doing so can cause product failure. Do not put any water or detergent on the Robot Cleaner. If liquids get inside of the Robot Cleaner, turn off the power supply and contact an LG Electronics sales agent or customer care center.

Do not allow the Robot Cleaner to sweep up liquids, blades, thumb tacks, kindling, etc.

These items can cause product failure.

Do not put sharp objects into the opening of the Robot Cleaner’s ultrasonic sensor.

Doing so can cause product failure.

Do not use the Robot Cleaner when the dust bin is completely ﬁ lled up.

Doing so can cause product failure.

CAUTION

SAFETY PRECAUTIONS

ENGLISH

Tip

If the ﬂ oor is wet or has wet spots, wipe them up before using the Robot Cleaner. Do not use the Robot Cleaner on a wet surface.

Failure to do so can cause product failure.

When attaching the mop, do not block the bottom camera sensor.

Blocking the bottom camera sensor may not allow the product to work smoothly.

If you do not use it to save the energy, turn off the power switch, and turn on the power switch when you are cleaning or recharging it.

When the robot cleaner is operating, it may hit the chair leg, desk leg, table leg or other narrow pieces of furniture.

For quicker and better cleaning, place the dining chairs on top of the dining table.

Make sure the plate on the ﬂ oor is higher than 2  from the ground before starting the cleaning.

If the threshold is low, the Robot Cleaner can go over it and perhaps into an undesirable location. Make sure that all the doors of the rooms that are not to be cleaned are closed.

Check the following items before use:

• Empty the dust bin after each operation or prior to it filling up.

• Remove any cables or long strings from the floor.

• Remove any moisture from the floor before cleaning.

• Close the cover of the dust bin before cleaning.

• Remove fragile or unnecessary objects from the room to be cleaned. For example, remove expensive ceramics and valuables from the floor.

• Confirm whether the battery has sufficient power, and if it is low, recharge it.

• Close the doors of any room that you do not want the Robot Cleaner to enter. During cleaning, the Robot Cleaner may enter another room and continue cleaning.

• Do not use this product in the room where a child is sleeping alone. The child can be hurt or woken.

• Remove towels, foot towel or any other thin cloth from the floor as they can get caught by the brush.

• Before starting the device, it's better to remove carpets that are thicker than 20  as they may cause it to malfunction.

• Please close any balcony doors. The wheels may get stuck while cleaning.

INCLUDED WITH PRODUCT

Robot Cleaner

Remote controller

 Figures can be different from actual objects.

Cleaning Tool

for cleaning

sensors

for cleaning

the ﬁ lter

Cleaning brush

(It’s on the dust bin cover)

Dust bin ﬁ lter (spare)

(option)

Mop plate (option)

Home station

Quick Guide

Cleaning Robot

This guide brieﬂy describes how to use the Cleaning Robot. For more detail, please refer to the user manual

Please read this manual carefully before installing and operating the product.

www.lg.com

Quick guide Operation manual

OWNER’S MANUAL

CLEANING ROBOT

Before using, please carefully read the Safety Precautions pages to allow for safe operation of the product. After reading the operation manual, please keep it in an easily accessible location.

Ultra microﬁ ber mop

(2 pieces) (option)

www.lg.com

Dry cell for remote controller

(2 units of AAA size)

Side brush (2 pieces)

(option)

Carpet Master

(option)

PARTS DESCRIPTION - ROBOT CLEANER

Plan view

Front view

ENGLISH

Upper camera sensor

Dust bin cover

Display & Manipulation button

Dust bin cover button

Ultrasonic sensors

Obstacle detecting sensor window Detecting sensors of home station & Receiving sensors of remote controller

Rear view

Bottom view

Power switch

Ventilation port

Cliff detection sensor

Side brush Charging terminal

Brush

Wheel

Battery

Lower camera sensor

 Figures can be different from actual objects.

PART DESCRIPTION – HOME STATION / DUST BIN

Home station

Remote controller holder

Charging terminal

Power switch

Dust bin

Dust bin cover

Suction port ﬂ ap

Dust bin cover

opening button

Power cord ﬁ xing hook

Dust bin handle

Cleaning brush

Sponge ﬁ lter

HEPA ﬁ lter

 Figures can be different from actual objects.

Filter cover

BUTTON FUNCTIONS – ROBOT CLEANER

ENGLISH

TURBO

START/STOP

MODE

HOME

BUTTON LOCK

On/Off

• If the button is pressed, ‘Turbo Mode’ will be set with a voice confirmation.

• If the button is pressed whilst in ‘Turbo Mode’, it will be canceled.

• Used to turn the power ON, start or stop cleaning.

• If the button is pressed whilst the unit is powered ON, it will start cleaning.

• If button is pressed during the cleaning, it will stop the cleaning.

• If the button is pressed for about 2 sec. whilst the power is ON, the power will be OFF.

• If the button is pressed in 'Smart Diagnosis' mode, it will end the diagnosis.

• Used to change the clean mode setting.

• If the machine is at the Home Station, ‘Spot Clean’ option is not available.

• The 'My Space' mode can only be selected by remote control (when the Robot Cleaner is not on the home station).

• Used to return the Robot Cleaner back to the home station for charging.

• If cleaning is finished or the battery is low, the Robot Cleaner will return to the Home Station by itself to recharge its battery.

• Pressing the ‘Turbo' and 'Mode' button for 3 seconds will activate or deactivate the Lock function.

• If 'Lock' is ON, a voice announcement "Key has been locked" will be heard each time a button is pressed.

BUTTON FUNCTIONS – REMOTE CONTROLLER

Start

Pressing this button will start the cleaning. (p16)

Mode

Change the cleaning mode. (p19)

Directional button

This button enables Manual Operation and selection of an area in 'My Space cleaning' mode.

Repeat

This button allows activating or deactivating 'Repeat Cleaning' mode. (p22)

Schedule

Used to start cleaning at a scheduled time. Pressing the button for 3 sec. will cancel the scheduled cleaning.

Schedule Setting/Cancel

※

options are available only in 'Charge' mode. (p24)

Clock

Used to set the current time indicated on the Robot Cleaner. (p23)

Home

Used to recharge the Robot Cleaner by making it return to the Home Station. (p17)

Turbo

Used to activate or deactivate 'Turbo' mode. (p22)

Stop/OK

Pressing the button will stop the Robot Cleaner, or conﬁ rm a cleaning schedule or time setting.

My Space

Used to put the Robot Cleaner in 'My Space clean' mode. (p20)

Mute

Used to activate or deactivate 'Mute' mode. (p11)

Diagnosis

Used to run Smart Diagnosis. Available only when Robot Cleaner is recharging. (p27)

Tip

• Remote Controller does NOT provide a Power ON function.

• With the machine's power OFF, the Remote Controller will not work.

• To turn the power ON/OFF, use the 'Start/Stop' button on the upper section of the Robot Cleaner.

• Only use the 'Mode', 'My Space' or 'Clock' button after stopping Robot Cleaner.

Lock icon

Indicates whether 'Lock‘ is activated or not.

Schedule icon

Indicates the status of Schedule/'One time', or 'Everyday' setting.

Repeat cleaning

Displayed if the machine is in 'Repeat Cleaning' mode.

Zigzag cleaning

This icon is displayed to indicate Robot Cleaner is working in a Zigzag Clean.

Cell by Cell cleaning

This icon is displayed to indicate Robot Cleaner is working in a Cell by Cell cleaning mode.

DISPLAY STATUS INFORMATION

Mute icon

This icon indicates whether the Mute is ON or OFF.

Battery icon

This icon indicates the residual battery level, it ﬂ ickers if the battery needs recharging.

AM/PM icon

This indicates whether it's a.m. or p.m. according to the clock setting.

Turbo icon

This display is ON if Turbo Mode is activated.

Homing icon

This icon is displayed if Robot Cleaner is in 'Homing' mode.

My Space cleaning

Displayed when the Robot Cleaner runs My Space clean.

Time display

This indicates the current and scheduled time.

Spot cleaning

This icon appears when Robot cleaner starts Spot cleaning.

ENGLISH

Tip

• Once the clean mode is selected (Zigzag or Cell by Cell) it will be remembered even if the power is OFF.

• To cancel the reservation, please press the 'Schedule' button on the remote for 3 seconds while the Robot Cleaner is recharging.

BEFORE YOU START

–

Check these items before cleaning

• Do not use this device in a room where a child is left alone. The child could be injured.

• Remove fragile or unnecessary objects from the room to be cleaned. Especially, remove expensive ceramics and valuables from the floor.

• Close the cover of the dust bin before cleaning.

• Remove any moisture that might be on the floor.

• Remove cables, strips, towels, mats etc. from the floor so they will not get caught by the brush.

• Confirm whether the battery charge is sufficient, and if it is low, recharge it.

• Empty the dust bin before or after each clean, or before it becomes full.

• Close the doors of any room that you do not want the Robot Cleaner to enter. During cleaning, the Robot Cleaner may enter another room and continue cleaning.

• When the mop is attached, Robot Cleaner will not be able to go over thresholds of 5  or higher. If you are not planning to use the mop for cleaning, separate the mop before using Robot Cleaner.

• Before starting the device, it's better to remove carpets that are thicker than 20  as they may cause it to malfunction.

• Please close any balcony doors. The wheels may get stuck while cleaning.

Loading the remote controller battery

1. Open the battery cover by lifting the rear hook of the remote controller.

2. Insert two AAA batteries, checking for +, - nodes while loading.

3. Close the battery cover completely so that the batteries will not fall out.

Precautions while using the remote control

• Only press one button at a time.

• Do not drop or subject it to forceful impact.

• Do not store it near devices that give off heat, fire or hot air.

• Certain fluorescent lamps, such as the three band radiation lamp, can interfere with the activation of the remote control. Therefore, use it as far away as possible from such lamps.

• If the remote control is far from the Robot Cleaner when activated, it may fail to operate properly. Use the device within 3  of the Robot Cleaner if possible.

OVERVIEW

ENGLISH

Install the home station. (p14)

Insert the power cord plug into an outlet and locate the station against a wall. If power is not supplied to the home station, the Robot Cleaner will not charge.

Turn on the power supply of the Robot Cleaner. (p15)

Turn ON the power switch on the rear-left of Robot Cleaner, and press the 'Start/Stop' button on the top.

※

If the power supply is not turned on, refer to

page 15.

Check the dust bin.

Check the cleanness of the dust bin before start cleaning and close the cover of the dust bin on the main unit.

Start cleaning. (p16)

Press the START/STOP button once again while the Robot Cleaner is turned on. You will hear the sound of cleaning and cleaning will begin.

1.5 

2 

Automatic charge. (p17~18)

< Warning > When Robot Cleaner is operated with the cover of the dust bin open,

The Robot Cleaner will self-diagnose and automatically return to the home station to recharge before the complete discharge of the battery. It takes approximately three hours to charge the battery.

Use the cleaning mode and auxiliary functions. (p19~25)

Use the buttons on Robot cleaner and Remote Controller to use each cleaning mode and supporting feature. Cleaning modes include ZigZag, Cell by Cell, Spot, My space, and Repeat cleaning; supporting features include Manual, Scheduled and Microﬁ ber Mop cleaning.

it can cause an injury or serious damage to the product.

HOW TO INSTALL THE HOME STATION

How to Install the Home Station

1. Position the home station against a wall on hard level ﬂ ooring to

prevent sliding during docking.

Remove objects within 1.5  to the right and left side and within

2  to the front.

1.5 

2. Plug the power cord into an outlet.

Wrap the power cord around the ﬁ xed hook on the back side of

the home station or along the wall surface so that the travel path of the Robot Cleaner will not be obstructed.

3. Fix the home station against the wall so that it does not move.

Please turn on the power switch.

1.5 

Fixing hook of power cord

2 

4. When the remote controller is not used, store it on the remote

controller holder on the home station.

Tip

< Warning > Do not operate the Robot Cleaner if the Home Station has a damaged cord or plug, if

• Always keep the home station plugged in. If the home station is not plugged in, the Robot Cleaner will not return to the station to charge automatically.

it is not working properly, or if it has been damaged or dropped. To avoid hazard, the cord must be replaced by LG Electronics, Inc. or a qualified service person.

HOW TO TURN THE ROBOT CLEANER POWER SUPPLY ON & OFF

Turning on the main power supply

Make sure the Power Switch on the rear-left of the Robot Cleaner. If the power is OFF, turn the switch ON.

※

When turning on the power switch, do not press the button located at the upper section of the Robot Cleaner. Operation of the button can be delayed.

※

Turn off the power switch if the Robot Cleaner will not be used

for a long period of time, in order to protect the battery. The Robotic Cleaner cannot charge if the main switch is in the "OFF" position.

Turning on from Stand By power.

With the power of Robot Cleaner OFF, press 'Start/Stop' button for 1 second until a "Ting" sound is heard. In about 10 seconds, the power will be on and a melody will sound.

※

If 10 minutes elapse without the Robot Cleaner having being

given an active command after being turned on, the power will automatically turn OFF.

ENGLISH

Turning off the power supply

Press the START/STOP button for two seconds while the Robot Cleaner is turned on. A melody will sound when the power is turned off.

Tip

• If the power cannot be turned on, do the following.

- Turn on the power switch and wait for more than 3 seconds.

- Press the ‘START/STOP’ button when the power switch is turned on.

- If the power is not turned on or if there is no display but only the “Ting” sound, put

the Robot Cleaner manually on to the home station.

HOW TO START AND STOP CLEANING

Using the buttons on the Robot Cleaner

After the Robot Cleaner is turned on, press the START/STOP button to begin cleaning. A melody will sound and cleaning will begin.

Press the START/STOP button during the cleaning cycle to stop cleaning.

※

When the ‘START/STOP’ button is pressed while the power supply

of the Robot Cleaner is turned off, the power will be turned on. Press the ‘START/STOP’ button one more time to start cleaning.

Using the remote controller

After the Robot Cleaner is turned on from the Robotic Cleaner, press the START button on the remote control. A melody will sound and cleaning will begin.

Press the Stop/OK button during the cleaning cycle to stop cleaning.

※

The Robot Cleaner cannot be turned on from Stand By, by using

the remote controller when the power of the Robot Cleaner is off. When the power is off, press the ‘START/STOP’ button on the upper side of Robot Cleaner to turn the power on and to allow the remote to be used.

※

During cleaning, collisions can happen when the sensor cannot detect objects because of their shape (Thin

chairs and table legs, furniture corner). When this happens, the internal impact detecting sensor will react by using a backward motion.

※

If the Robot Cleaner is set to start cleaning at a location away from the home station, put the Robot

Cleaner on a ﬂ at ﬂ oor in order to prevent a malfunction of the obstacle detecting sensor. In addition, start cleaning from a location where there are no obstacles such as curtains or walls within 30  of the Robot Cleaner.

Tip

For best results:

• Briefly scan the area to be cleaned for big and small objects that will cause difficulty for the Robot Cleaner.

• If cleaning is started when the Robot Cleaner is at the home station, the device can rapidly be returned to the home station as the current home position has been accurately read.

• When the mop plate is installed, to prevent a 2 it will not go over door sills of 5  or higher.

contamination from the contaminated mop,

HOW TO CHARGE THE BATTERY

Automatic charging

The Robot Cleaner returns to the home station at the end of a cleaning cycle or when its battery is running low.

※

If 10 minutes elapse without the Robot Cleaner moving or the battery is too low, the power will automatically be turned OFF.

※

Do NOT turn OFF the Main Power Switch as the battery will not be recharged. If the machine is returned manually with the Main Power Switch OFF, it shows an error message, "Main power switch on the back of the HOM-BOT is turned off. Please turn the switch on."

※

In the event that the unit returns to the Home Station due to a

low battery during the cleaning, cleaning will be started, after the charging, from the nearest place of the area which has not been cleaned before. (Page 18)

※

If Robot Cleaner is unable to dock to the home station on its ﬁ rst attempt, it will try again until it docks successfully.

※

When Robot Cleaner has completed all areas that it can clean, it will return to the home station even when the battery level is not low.

Manual charging

If using the Robot Cleaner for the ﬁ rst time or when charging the battery during cleaning, you can manually charge the battery.

ENGLISH

Method 1. Attach the Robot Cleaner to the home

station by aligning to the front side of the home station. A melody sound will be generated along with an audio message to start charging.

※ If a voice message, "Main power switch on

the back of the HOM-BOT is turned off. Please turn the switch on." is announced repeatedly, then turn on the Main Power Switch.

Method 2. When the 'HOME' button of the remote

control or the Robot Cleaner is pressed, charging will be prompted by automatically generating a searching signal and returning the Robot Cleaner to the home station.

※ If the Robot Cleaner did not start cleaning from the home station or if the Robot Cleaner is manually

charged by pressing the Home button, it may take slightly longer to ﬁ nd the home station.

※

If the Robot Cleaner is within 10  of the front of the charging terminal while the power supply is turned on, it will automatically be returned to the home station and charging will begin.

Tip

Take the following precautions when using the home station:

• If foreign material is caught in the charging terminal, charging may not proceed smoothly. Wipe the terminal from time to time with a dry cloth after the power plug is disconnected.(p32)

• To prevent electric shock or damage to the home station, do not touch the charging terminal

with any metallic objects.

• To avoid fire or electric shock, never disassemble or modify the home station.

• Do not to place the home station or power plug near a heating source.

HOW TO CHARGE THE BATTERY

Flickering

Remaining Battery Charge Indicator

Battery level is indicated on Status Display, as follows.

• If recharging is in progress, the Battery Level Lamp ﬂ ickers.

• If recharging is complete, only the 'Battery' and 'Clean Mode' icons are displayed to save the energy.

• Upon the need for recharging, only the ﬁ rst level of Battery Level Lamp will be on and ﬂ ickering.

Flickering

Charging is required

Middle

※

If Robot Cleaner goes back to Home Station, with a low level of battery

while it is the 'Clean Mode' lamp starts to ﬂ icker.

- When the 'Clean Mode' lamp starts to ﬂ icker after recharging is complete, Robot Cleaner will then resume cleaning the areas which were not covered.

- Pressing the 'Start' button on the Remote Controller or 'Stop' button on

main unit whilst it is recharging, with the 'Clean Mode' lamp ﬂ ickering, will also make Robot Cleaner ﬁ nd and clean uncovered spots.

- Pressing the "Start" button on the remote control or the "Start/Stop"

button on the device after changing the mode will make the Robot Cleaner start to clean from beginning again.

If the Battery is Not Charging

Check 1:

If the battery is not charging even when the Robot Cleaner is attached to the home station, check the following items.

- Turn the power switch on the rear-left of the Robot Cleaner

off once and then on again.

- Check the power lamp of the home station.

- Wipe the terminal on the home station with a dry cloth. (p32)

Low

High

The status indication lamp

while the robot is charged

(In spatial Zigzag mode)

In the case of no existing

area to be cleaned

In the case of an existing area

to be cleaned (Flickering)

Power lamp Charge terminal

Zigzag Cleaning

In 'Zigzag Clean' mode, Robot Cleaner repeats a zigzag operation to clean every and each spot in the cleaning area.

If you need to quickly clean an area choose 'Zigzag Clean' mode. Press ‘Mode’ button on Remote Controller or main unit to select 'Zigzag Clean' mode and press 'Start' button.

※

Factory release default setting is 'Zigzag Clean.'

CLEANING MODES

ENGLISH

Cell by Cell Cleaning

In 'Cell by Cell' mode, Robot Cleaner cleans the area by dividing it into rectangular spaces. For meticulous cleaning, select this mode.

Press ‘Mode’ button on Remote Controller to select 'Cell by Cell' mode and press 'Start' button.

The 1st stage:

The maximum outline of 3  x 3  of cleaning area will be cleaned. (The size of the outline may vary in accordance with the shape of the area to be cleaned.)

The 2nd stage:

The 2nd stage of Cell by Cell cleaning engages a Zigzag mode automatically.

When the 1st, 2nd stages are completed, the cleaned area will be cleaned through the repetition of the above cleaning method as the device is being moved to the next part of cleaning area.

Tip

• Once set up, the cleaning mode(Zigzag, Cell by Cell) setting will be maintained even after the power supply is turned off.

• During operation, if a mode change is required, press the Stop/OK button and then select the mode. Cleaning will then start from the beginning.

CLEANING MODES

My Space Cleaning

Pressing 'My Space' on Remote Controller will set the My Space cleaning mode with a voice message. For cleaning of particular spaces, select this mode.

The 1st stage:

Use the Remote Controller to manually run the cleaning on outskirts of each cleaning block.

※

This cleaning mode will be accepted when the distance of the start and end position is less than 1 .

My Space

The 2nd stage:

Pressing the 'Start' button will then make the Robot Cleaner clean the manually outlined area by itself.

※

Upon failure to correctly outline a zone, a voice will announce, which says "Area does not meet the

speciﬁ ed conditions. Please continue to make speciﬁ ed area for cleaning process." Use the Remote Controller to assign a zone, again.

※

Upon completion of cleaning for all selected areas, the Robot Cleaner will be placed in the cleaning mode

(Zigzag or Cell by Cell) which was run, right before.

Tip

• While recharging, you cannot activate 'My Space clean' mode.

• To change the cleaning mode while Robot Cleaner is in operation, press 'Stop/OK' button first to select a mode The cleaning will the start from the begining.

AUXILIARY CLEANING MODES

Manual cleaning

By pressing a direction key on Remote Controller, you can move Robot Cleaner in a Manual mode. Robot Cleaner will clean the area, moving forward/backward/left/right, according to the input of the direction key. While in 'Manual' mode, the robot cleaner will run into obstacles placed behind it if the backward key on the remote remains held down.

ENGLISH

Spot Cleaning

Is best used used to clean certain parts of the house. Press 'Mode’ button on Remote Controller to select 'Spot Clean' mode, indicated on Status Display, and 'Start' button, then Robot Cleaner will start Spot cleaning for a space within a 1.5  diameter.

※

While recharging, 'Spot Clean' cannot be selected.

It stops at the started position after

completing the cleaning(takes 4~5 min.).

AUXILIARY CLEANING MODES

Turbo Mode

Pressing 'Turbo' button on Remote Controller or main unit will activate 'Turbo' mode, with a voice message.

While in 'Turbo' mode, pressing the same button will cancel 'Turbo' mode, with a voice message.

In 'Turbo' mode, Robot Cleaner runs more intensely for a powerful clean.

※

‘Turbo mode’ will automatically operate when the Robot Cleaner cleans carpets.

Repeat Mode

Pressing 'Repeat' button on Remote Controller will activate 'Repeat' mode, with a voice message.

While in 'Repeat' mode, pressing the same button will cancel 'Repeat' mode, with a voice message.

In 'Repeat' mode, Robot Cleaner repeats the cleaning in progress until the battery runs out.

Learning Mode

Robot Cleaner is capable of memorising the cleaning environment through its Learning mode for an intelligent cleaning operation.

※

'Learning Mode' is available only when the

machine starts cleaning from the Home Station.

Tip

• Precautions with Smart Operation

- This Learning mode enables memorizing locations with obstacles to bypass them. Robot

Cleaner memorizes every aspect of the environment it was put under from when it started cleaning from the Home Station to the moment it finishes its course.

- Robot Cleaner learns the new conditions when the location of Home Station has been

changed.

- If the learning mode is accepted, a voice message will say "The learning cleaning process is

complete."

TIME SETTING

Flickering

You can set the current time on the Robot Cleaner. Pressing ‘Clock' button on Remote Controller, when Robot Cleaner is waiting, will start the current time setting.

ENGLISH

Select by using ' on the Remote Controller.

The function can be heard through the voice guide.

' buttons

Flickering

Set the time units by using '' buttons on Remote Controller.

Set the unit of minutes using '' buttons on Remote Controller.

Set the AM/PM using '' buttons on Remote Controller.

Pressing ‘Clock’ or ‘Stop/OK’ button on Remote Controller will complete the time setting process.

Tip

• Any scheduled cleaning will be activated based on the time on the Robot Cleaner. You must set the clock before setting scheduled cleaning.

• If there is no input for 10 seconds, the clock setting is canceled.

SCHEDULED CLEANING

Flickering

You can schedule a cleaning so that the Robot Cleaner starts cleaning at a scheduled time. Pressing 'Schedule' button on Remote Controller, when the battery is recharging, will start the scheduled cleaning setting.

Setting/Cancelling the reservation is only possible when the unit is recharging.

Select a level by using ' buttons on Remote Controller.

'One time'

'Everyday'

'

Flickering

Select 'One Time' or 'Everyday' option by using '' buttons on Remote Controller. A voice message will conﬁ rm the schedule.

Set the hour units by using the '' buttons on Remote Controller.

Set the minutes by using the '' buttons on Remote Controller.

Set the AM/PM using the '' buttons on Remote Controller.

Pressing 'Schedule’ or ‘Stop/OK’ button on Remote Controller will then complete the scheduling process.

Tip

• When the scheduled time comes up, Robot Cleaner will start cleaning by itself.

• Scheduled cleaning can only be set when the Robot Cleaner is recharging.

• While recharging, by pressing the 'Schedule' button on the Remote Controller for 3 seconds will cancel the set schedule.

• If there is no input when setting the schedule time within 10 seconds, the setting is canceled.

MOP CLEANING (OPTION)

“Click!”

By attaching the ultra microﬁ ber mop, you can effectively use the Robot Cleaner to remove dust.

When the mop plate is attached, the Robot Cleaner will not climb on to carpets or over thresholds, in order to prevent transferring dirt from the mop.

Caution

Do not cover the bottom camera sensor by mop.

For mop cleaning, mount the mop and mop plate to the Robot Cleaner according to the following instructions:

1. Attach the ultra microﬁ ber mop to the Velcro of the mop plate as shown in the ﬁ gure.

ENGLISH

2. Firmly push the Mop Plate into the furrows

until you hear a 'click' sound.

※ Note that, if the Mop Plate is not secured

correctly, it may separate during the cleaning.

3. It is essential that the ﬁ xing hooks on the Mop

Plate align correctly on to the ﬁ xing grooves on the underside of the cleaner.

Tip

• To avoid odors, wash any foreign material or dust off the mop after cleaning is complete.

• To avoid staining floors, do not use the ultra microfiber mop to clean when dirt is mixed with liquids such as coffee or ink.

• To avoid damage to carpets from the Velcro or dirt transfer from the mop, do not clean the carpet while the mop plate or mop is attached.

• Keep the ultra microfiber mop dry. Do not use it on wet surfaces. If there is moisture, it can interfere with the navigation.

• Smart Diagnosis feature is not available, when the Mop Plate is attached.

Fixing hook

Fixing groove

“Click!”

LOCATION SEARCH FUNCTION

The Robot Cleaner remembers its location while cleaning. If the user moves the Robot Cleaner while it is operating, it will search for the location it was moved from by using its navigational location search function before continuing to clean.

※

The navigating function will be activated after the

Robot Cleaner adequately recognizes the cleaning environment.

When the location search

function is activated, the

cleaning mode of the status

indicator will ﬂ ash

1 

Location of incident

Manual Relocation.

1. Locate the Robot Cleaner near the location where it was originally moved from.

※

The location search is more effective when the

Robot Cleaner is closer to the location where it was moved from.

※

If it is moved from its original cleaning position

by more than 1 , it becomes difﬁ cult for the Robot Cleaner to search for it's previous location.

Change location

2. Press the START/STOP button on the Robot Cleaner or START button on the remote controller.

Robot Cleaner will then start the location search function along with an audio guide.

※

When the location search is successfully completed, it will continue cleaning from where it was moved.

If the location search fails, it will start again from the beginning.

To improve its accuracy, do not

stand near the HOM-BOT when

it is in location search mode.

Location of incident

Tip

• When the power is turned off after the location search function is set, the location search function will be canceled.

• Location search will be more effective when the Robot Cleaner is closer to the location where it was moved from.

SMART DIAGNOSIS

Robot Cleaner uses this Smart Diagnosis feature to run a self-diagnosis. If any irregularity is found from the diagnosis, please contact the local LG Electronics service center.

※

During Smart Diagnosis, the Robot Cleaner will move about within a 50  radius. So, make sure no

objects are in the way within a 1  radius around the Home Station, before starting Smart Diagnosis.

1. Turn ON the Main Power Switch on the back after making sure the Robot Cleaner is attached to the Home Station.

※

Smart Diagnosis is only possible when the Robot

Cleaner is attached to the Home Station.

2. Press 'Diagnosis' button on the Remote Controller, then

the process will start with a voice message which says "Starting HOM-BOT smart diagnosis. Please step away and remove any items within 1 meter, or about 3 feet."

※

If the Mop Plate is attached, the process will not be

activated.

ENGLISH

3. When the Smart Diagnosis has successfully

ﬁ nished, Robot Cleaner will return back to the Home Station and inform the result through a voice message. After the voice message, pressing the 'HOME' button on the Remote Controller or main unit will allow the voice message to be repeated. To terminate the diagnosing process, press the '‘Stop/OK' button on the Remote Controller or main unit.

※

After the Smart Diagnosis voice message,

the Robot Cleaner will start recharging after 1minute.

※

If an error is detected with any of the Sensors

whilst in Smart Diagnosis, a voice message will announce, and the unit will not return to the home station.

Tip

• Be careful not to touch the Robot Cleaner or disturb its operation before Smart Diagnosis is complete. If it is accidently interrupted, turn the main power switch OFF then ON again to resume the diagnosis.

• Smart Diagnosis will not be activated in each of the following cases. In each case, check the problem and try again.

- Robot Cleaner is detached from Home Station

- Battery level is insufficient

- No Dust Bin Filter is fitted.

- Mop Plate is attached

SMART DIAGNOSIS

If a voice message is announced after Smart Diagnosis, refer to the following table to take proper actions.

Voice message Measures (for reference)

Spuštění HomBot chytré diagnostiky. Prosím, odstupte a odstraňte všechny položky v dosahu 1 metru nebo cca 3 stop.

Pro aktivaci chytré diagnostiky je třeba, aby se Hombot nabil. Prosím, ukotvěte Hombot do domovské stanice.

Spuštění HomBot chytré diagnostiky. Rezervace byla zrušena pro chytrou diagnostiku. Prosím, odstupte a odstraňte všechny položky v dosahu 1 metru nebo cca 3 stop.

Během diagnostiky nebyly zjištěny žádné závady. Nelze zahájit chytrou diagnostiku vzhledem k nízké úrovni nabití

baterie. Zkuste to prosím znovu, jakmile bude baterie nabitá. Zkontrolujte prosím, zda jsou odpadní nádoba a ﬁ ltr správně

nainstalovány. HomBot se nebude nabíjet kvůli chybě na ultrazvukovém

senzoru. Prosím zkuste znovu chytrou diagnostiku poté, co vypnete a zase zapnete hlavní vypínač na zadní straně HomBot vysavače. Pokud problém přetrvává, obraťte se prosím na zákaznickou linku LG Electronics.

HomBot se nebude nabíjet kvůli chybě na infračerveném senzoru.

HomBot se nebude nabíjet kvůli problému s cliff senzorem ve spodní části. Prosím očistěte senzory.

Prosím vyčistěte senzor kamery na spodní pravé straně. Clean the lens of Camera Sensor on the bottom-right Vyčistěte prosím senzorická okna detekce překážek na levé a

pravé straně vysavače HomBot. A problem has been found on the Gyro Sensor. Run Smart Diagnosis again and, if the same message is

Zkontrolujte prosím, zda není nějaký cizí materiál na pravém kole.

Zkontrolujte prosím, zda není nějaký cizí materiál na levém kole. Check for foreign materials on the right wheel. Byl nalezen problém na senzoru levého kola. Run Smart Diagnosis again and, if the same message is

Byl nalezen problém na senzoru pravého kola. Run Smart Diagnosis again and, if the same message is

Byl nalezen problém s kartáčem. Zkontrolujte prosím, zda na něm není nějaký cizí materiál.

Byl nalezen problém v sacím motoru. Run Smart Diagnosis again and, if the same message is

Byl nalezen problém v senzoru zrychlení.

Chcete-li si znovu poslechnout výsledek chytré diagnostiky, stiskněte prosím tlačítko pro nabíjení. Pro ukončení, stiskněte prosím tlačítko stop.

Režim chytré diagnostiky se vypne. Režim chytré diagnostiky nebude fungovat s připojeným talířem

mopu. Zkuste to prosím znovu po jeho odstranění. Chytré diagnostice se nepodařilo dokončit její diagnostiku.

Zkuste to prosím znovu poté, co vypnete a zase zapnete hlavní vypínač na zadní straně HomBot vysavače.

Zkontrolujte prosím, zda není nabíjecí terminál poškozený nebo špinavý.

Clear any object within a 1 m radius around Home Station, and stay back until the diagnosis is complete.

Move Robot cleaner to the Home Station to recharge it.

Try the Smart Diagnosis again after recharging the battery.

Open the Dust Bin Cover and examine the bin.

Run Smart Diagnosis again and, if the same message is announced, contact an LG Electronics service center.

Clean the three Cliff Sensors on the bottom at the front of the unit.

Clean the lens of the Obstacle Sensors on both the left and right hand sides.

announced, contact an LG Electronics service center. Check for foreign materials on the left wheel.

announced, contact an LG Electronics service center.

announced, contact an LG Electronics service center. Check for any foreign material stuck in the Brush.

announced, contact an LG Electronics service center. Run Smart Diagnosis again and, if the same message is

announced, contact an LG Electronics service center. If you need to repeat the diagnosis result, press the 'Home'

button, or press 'Stop/OK' button to ﬁ nish the diagnosis.

Run Smart Diagnosis again after removing the Mop Plate.

Turn the main power switch OFF and then ON again to resume the diagnosis. Do NOT touch the robot or disturb its operation until the diagnosis is complete.

Clean the bottom of the machine and Charging Terminal on Home Station.

+ 122 hidden pages