LG VR242CW Owner's Manual

OWNER'S MANUAL

AIR CONDITIONER

Read this owner's manual thoroughly before operating the appliance and keep it handy for reference at all times.

TYPE : WALL MOUNTED

EN English SP Español

MODELS

Indoor Unit Outdoor Unit

VR122HW NJM0 (USNW122JRP1)

VR182HW NKM0 (USNW182KRP1)

VR242HW NKM0 (USNW242KRP1) VR242HW USM0 (USUW242KRP1)

VR122CW NJM0 (USNQ122JRP0)

VR182CW NKM0 (USNQ182KRP0)

VR242CW NKM0 (USNQ242KRP0) VR242CW USM0 (USUQ242KRP0)

VR122HW USM0 (USUW122JRP1)

VR182HW USM0 (USUW182KRP1)

VR122CW USM0 (USUQ122JRP0)

VR182CW USM0 (USUQ182KRP0)

P/NO : MFL69829302 Rev.01_170125

www.lg.com

TABLE OF CONTENTS

SAFETY INSTRUCTIONS ................................................... 3

IMPORTANT SAFETY INSTRUCTIONS ................................................3

OPERATION ....................................................................... 11

Notes for Operation .............................................................................. 11

Parts and Functions .............................................................................. 11

Wireless Remote Control ...................................................................... 12

Restarting the Air Conditioner Automatically ........................................17

Using the Mode Function ...................................................................... 17

Using the Jet Mode Function ................................................................ 19

Using the Fan Speed Function ............................................................. 20

Using the Air Flow Direction Function ...................................................20

Setting the On/Off Timer ....................................................................... 21

Using the Sleep Function (Optional) ..................................................... 22

Using the Simple Timer Function (Optional) .........................................22

Using the Energy Display Function (Optional) ...................................... 23

Using the Light Off Function (Optional) ................................................23

Using the Comfort Air Function (Optional) ............................................23

Using the Energy Saving Function (Optional) ......................................24

Using the Energy Control Function (Optional) ...................................... 24

Using the Comfort Sleep Function(Optional) ........................................ 25

Using Special Functions ....................................................................... 25

This manual may contain images or content different from the model you purchased.

This manual is subject to revision by the manufacturer.

SMART FUNCTIONS ......................................................... 28

Using Smart ThinQ Application .............................................................28

MAINTENANCE .................................................................. 30

Clean the Air Filter ................................................................................32

Clean the 3M and Triple Filter (Optional) ..............................................33

TROUBLESHOOTING ....................................................... 34

SAFETY INSTRUCTIONS

The following safety guidelines are intended to prevent unforeseen risks or damage from unsafe or incorrect operation of the appliance. The guidelines are separated into ‘WARNING’ and ‘CAUTION’ as described below.

This symbol is displayed to indicate matters and operations that can cause risk. Read the part with this symbol carefully and follow the instructions in order to avoid risk.

WARNING

This indicates that the failure to follow the instructions can cause serious injury or death.

CAUTION

This indicates that the failure to follow the instructions can cause the minor injury or damage to the product.

IMPORTANT SAFETY INSTRUCTIONS

WARNING

To reduce the risk of explosion, fire, death, electric shock, injury or scalding to persons when using this product, follow basic precautions, including the following:

•Before accessing the terminals, all power circuits must be disconnected.

•Fixed installations will incorporate disconnect means in accordance with installation rules.

•This device will not be accessible to public.

•The appliance must be installed in accordance with national regulations for electrical installations.

Children in the Household

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

Installation

•Do not install the air conditioner on an unstable surface or in a place where there is danger of it falling.

•Contact an authorized service center when installing or relocating the air conditioner.

•Install the panel and the cover of the control box safely.

•Do not install the air conditioner in a place where flammable liquids or gases such as gasoline, propane, paint thinner, etc., are stored.

•Make sure that the pipe and the power cable connecting the indoor and outdoor units are not pulled too tight when installing the air conditioner.

•Use standard circuit breaker and fuse that conform to the rating of the air conditioner.

•Do not input air or gas into the system except with the specific refrigerant.

•Use non-flammable gas (nitrogen) to check for leak and to purge air; using compressed air or flammable gas may cause fire or explosion.

•The indoor/outdoor wiring connections must be secured tightly, and the cable should be routed properly so that there is no force pulling the cable from the connection terminals. Improper or loose connections can cause heat generation or fire.

•Install dedicated electric outlet and circuit breaker before using the air conditioner.

•Do not connect the ground wire to a gas pipe, a lightning rod, or a telephone ground wire.

Operation

•Be sure to use only those parts listed in the service parts list. Never attempt to modify the equipment.

•Make sure that children do not climb on or hit the outdoor unit.

•Dispose of the batteries in a place where there is no danger of fire.

•Use only the refrigerant specified on the air conditioner label.

•Cut off the power supply if there is any noise, smell, or smoke coming from the air conditioner.

•Do not leave flammable substances such as gasoline, benzene, or thinner near the air conditioner.

•Contact an authorized service center when the air conditioner is submerged by flood waters.

•Do not use the air conditioner for an extended period time in a small place without proper ventilation.

•In the event of a gas leak (such as Freon, propane gas, LP gas, etc.) ventilate sufficiently before using the air conditioner again.

•To clean the interior, contact an authorized service center or dealer. Using harsh detergents may cause corrosion or damage to the unit.

•Be sure to ventilate sufficiently when the air conditioner and a heating appliance such as a heater are used simultaneously.

•Do not block the inlet or outlet of air flow.

•Do not insert hands or other objects through the air inlet or outlet while the air conditioner is operating.

•Make sure that the power cable is neither dirty, loose, nor broken.

•Never touch, operate, or repair the air conditioner with wet hands.

•Do not place any objects on the power cable.

•Do not place a heater or other heating appliances near the power cable.

•Do not modify or extend the power cable. Scratches or peeling insulation on the power cables may result in fire or electric shock, and should be replaced.

•Cut off the power supply immediately in the event of a blackout or a thunderstorm.

•Take care to ensure that power cable could not be pulled out or damaged during operation.

•Do not touch refrigerant pipe or water pipe or any internal parts while the unit is operation or immediately after operation.

Maintenance

•Do not clean the appliance by spraying water directly onto the product.

•Before cleaning or performing maintenance, disconnect the power supply and wait until the fan stops.

Technical Safety

•Installation or repairs made by unauthorized persons can pose hazards to you and others.

•The information contained in the manual is intended for use by a qualified service technician who is familiar with the safety procedures and equipped with the proper tools and test instruments.

•Failure to read and follow all instructions in this manual can result in equipment malfunction, property damage, personal injury and/or death.

•The appliance shall be installed in accordance with national wiring regulations.

•When the power cord is to be replaced, the replacement work shall be performed by authorized personnel using only genuine replacement parts.

•This appliance must be properly grounded to minimize risk of electric shock.

•Do not cut or remove the grounding prong from the power plug.

•Attaching the adapter ground terminal to the wall receptacle cover screw does not ground the appliance unless the cover screw is metal, uninsulated, and the wall receptacle is grounded through house wiring.

•If you have any doubt whether the air conditioner is properly grounded, have the wall receptacle and circuit checked by a qualified electrician.

•The refrigerant and insulation blowing gas used in the appliance require special disposal procedures. Consult a service agent or a similarly qualified person before disposing of them.

•If the supply cord is damaged, it must be replaced by the manufacturer or its service agents or similarly qualified person in order to avoid a hazard.

CAUTION

To reduce the risk of minor injury to persons, malfunction, or damage to the product or property when using this product, follow basic precautions, including the following:

Installation

•Do not install the air conditioner in an area where it is directly exposed to sea wind (salt spray).

•Install the drain hose properly for the smooth drainage of water condensation.

•Exercise caution when unpacking or installing the air conditioner.

•Do not touch the leaking refrigerant during installation or repair.

•Transport the air conditioner with two or more people or use a forklift.

•Install the outdoor unit such that it is protected from direct sunlight. Do not place the indoor unit in a place where it is directly exposed to sunlight via the windows.

•Safely dispose of packing materials such as screws, nails or batteries using proper packaging after installation or repair.

•Install the air conditioner in a place where the noise from the outdoor unit or the exhaust fumes will not inconvenience the neighbors. Failure to do so may result in conflict with the neighbors.

Operation

•Remove the batteries if the remote control is not to be used for an extended period of time.

•Make sure that the filter is installed before operating the air conditioner.

•Be sure to check if there is a refrigerant leak after installing or repairing the air conditioner.

•Do not place any object on the air conditioner.

•Never mix different types of batteries, or old and new batteries for the remote control.

•Do not let the air conditioner run for a long time when humidity is very high or when a door or a window has been left open.

•Stop using the remote control if there is a fluid leak in the battery. If your clothes or skin are exposed to the leaking battery fluid, wash off with clean water.

•Do not expose people, animals, or plants to the cold or hot wind from the air conditioner for extended periods of time.

•If the leaking battery fluid has been swallowed, wash off the inside of the mouth thoroughly and consult a doctor.

•Do not drink the water drained from the air conditioner.

•Do not use the product for special purposes, such as preserving foods, works of art, and etc. It is an air conditioner for consumer purposes, not a precision refrigeration system. There is risk of damage or loss of property.

•Do not recharge or disassemble the batteries.

Maintenance

•Never touch the metal parts of the air conditioner when removing the air filter.

•Use a sturdy stool or ladder when cleaning, maintaining, or repairing the air conditioner at a height.

•Never use strong cleaning agents or solvents when cleaning the air conditioner or spray water. Use a smooth cloth.

OPERATION

Notes for Operation

Suggestion for Energy Saving

• Do not cool excessively indoors. This may be harmful for your health and may consume more electricity.

• Block sunlight with blinds or curtains while you are operating the air conditioner.

• Keep doors or windows closed tightly while you are operating the air conditioner.

• Adjust the direction of the air flow vertically or horizontally to circulate indoor air.

• Speed up the fan to cool or warm indoor air quickly, within a short period of time.

• Open windows regularly for ventilation. The indoor air quality may deteriorate if the air conditioner is used for long durations.

• Clean the air filter once every 2 weeks. Dust and impurities collected in the air filter may block the air flow or weaken the cooling / dehumidifying functions.

Parts and Functions

Indoor Unit Outdoor Unit

Air Filter

Air Intake

Front Cover

On/Off Button

Air Deflector (Vertical Louver)

Air Deflector (Horizontal Vane)

Air Outlet

Air Intake Vents

Air Outlet Vents

NOTE

• The number and location of operation lamps may vary according to the model of the air conditioner.

• The feature may be changed according to the type of model.

SWING

kW [3 s]

Wireless Remote Control

Inserting Batteries

If the display screen of the remote control begins to fade, replace the batteries. Insert AAA batteries before using the remote control.

Remove the battery cover.

Insert the new batteries and make sure that

the + and - terminals of the batteries are installed correctly.

Installing the Remote Control Holder

To protect the remote control, install the holder where there is no direct sunlight.

Choose a safe and easily accessible

location.

Operating Method

Point the remote control towards the signal receiver at the right side of the air conditioner to operate it.

NOTE

• The remote control may operate other electronic devices if it is directed towards them. Make sure to point the remote control towards the air conditioner signal receiver.

• For proper operation, use a soft cloth to clean the signal transmitter and receiver.

• In case of a function not provided in the product, no buzzer sound occurs from the product when a button for such function on the remote control is pressed except for Air Flow

Direction ( Purification function (

), Energy Display (

), Air

Fix the holder by fastening 2 screws firmly

with a screwdriver.

℃↔℉ [5 s]

SWING

ON/OFF

Setting the Current Time

Insert batteries.

• The icon below blinks at the bottom of the display screen.

Press or button to select the

minutes.

Press SET/CANCEL button to finish.

NOTE

• The On/Off Timer is available after setting the current time.

Using the °C/°F Conversion Function (Optional)

This function changes unit between °C and °F

• Press and hold

button about 5 seconds.

Operating the Air Conditioner without the Remote Control

You can use the ON/OFF button of the indoor unit to operate the air conditioner when the remote control is unavailable.

Open the front cover (Type1) or horizontal

vane (Type2).

Press the ON/OFF button.

Type1

Type2

ON/OFF

NOTE

• The stepping motor may be broken, if the horizontal vane opens rapidly.

• The fan speed is set to high.

• The feature may be changed according to the type of model.

• The temperature cannot be altered when using this emergency On/Off button.

• For cooling-only models, the temperature is set to 22 °C

• For cooling & heating models, the temperature is set from 22 °C to 24 °C

Using Wireless Remote Control

RESET

SWING

You can operate the air conditioner more conveniently with the remote control.

MODE

TEMP

kW [3 s]

SWING

℃↔℉ [5 s]

SET UP

FUNC.

TIMER CANCEL

FAN

SPEED

JET

MODE

ROOM TEMP

DIAGNOSIS [5 s]

SET

CANCEL

Button

Display

Screen

- To turn on/off the air conditioner.

To adjust the desired room temperature in cooling, heating or auto changeover mode.

To select the cooling mode.

To select the heating mode.

MODE

To select the dehumidification mode.

To select the fan mode.

To select the auto changeover/auto operation mode.

JET

MODE

FAN

SPEED

To change room temperature quickly.

To adjust the fan speed.

To adjust the air flow direction vertically or horizontally.

NOTE

• * buttons may be changed according to the type of model.

Description

TIMER

CANCEL

MODE

TEMP

kW [3 s]

SWING

℃↔℉ [5 s]

SET UP

FUNC.

TIMER CANCEL

FAN

SPEED

JET

MODE

ROOM TEMP

DIAGNOSIS [5 s]

SET

CANCEL

RESET

Button

SET/

CANCEL

Display

Screen

To turn on/off air conditioner automatically at desired time.

To set/cancel the special functions and timer.

Description

- To cancel the timer settings.

*LIGHT

OFF

ROOM

TEMP

°C↔°F [5 s] To change unit between °C and °F

*ENERGY

SAVING

*COMFORT

AIR

kW [3 s] -

*ENERGY

CTRL

*COMFORT

SLEEP

DIAGNOSIS

[5 s]

- To adjust time.

To set the brightness of the display on the indoor unit.

To display the room temperature.

To minimize power consumption.

To adjust the air flow to deflect wind.

To set whether or not to display information regarding energy.

To bring the effect of the power saving.

To make the comfortable sleep environment.

To conveniently check maintenance information of a product.

FUNC.

MODE

TEMP

kW [3 s]

SWING

℃↔℉ [5 s]

SET UP

FUNC.

TIMER CANCEL

FAN

SPEED

JET

MODE

ROOM TEMP

DIAGNOSIS [5 s]

SET

CANCEL

RESET

Button

Display

Screen

To purify the air by removing particles

that enters the indoor unit.

To reduce noise from outdoor units.

To keep your skin moisturized by generating ion clusters.

To lower indoor humidity quickly.

To maintain a minimum room temperature and prevent objects in the room from freezing.

To fan away a mosquito.

To remove moisture generated inside the indoor unit.

To make the comfortable sleep environment.

RESET - To Initialize the remote control settings.

NOTE

• Some functions may not be supported, depending on the model.

• * buttons may be changed according to the type of model.

• Press the SET/CANCEL button to operate the selected FUNC.

Description

ON/OFF

Restarting the Air Conditioner Automatically

When the air conditioner is turned on again after a power failure, this function restores the previous settings.

Disabling Auto Restart

Open the front cover (Type1) or horizontal

vane (Type2).

Press the ON/OFF button and hold it for 6

seconds, then the unit will beep twice and the lamp will blink twice 4 times.

• To re-enable the function, press the ON/ OFF button and hold it for 6 seconds. The unit will beep twice and the lamp will blink 4 times.

Type1

Type2

Using the Mode Function

This function allows you to select the desired function.

Cooling Only Model

Cooling Mode

Auto Operation(AI) Mode

Dehumidification Mode

Fan Mode

Cooling & Heating Model

Cooling Mode

Auto Changeover Mode

Dehumidification Mode

ON/OFF

NOTE

• The feature may be changed according to the type of model.

• If you press and hold the ON/OFF button for 3 – 5 seconds, instead of 6 seconds, the unit will switch to the test operation. In the test operation, the unit blows out strong cooling air for 18 minutes and then returns to factory default settings.

Heating Mode

Fan Mode

Cooling Mode

Turn the appliance on.

Press MODE button repeatedly to select the

Cooling Mode.

is displayed on the display screen.

•

Press or button to set the desired temperature.

Heating Mode

Turn the appliance on.

Press MODE button repeatedly to select the

Heating Mode.

is displayed on the display screen.

•

Press or button to set the desired temperature.

Dehumidification Mode

This mode removes excess moisture from a highly humid environment or during the rainy season, in order to prevent molding from setting in. This mode adjusts the room temperature and the fan speed automatically to maintain the optimal level of humidity.

Turn the appliance on.

Press MODE button repeatedly to select the

Dehumidification Mode.

is displayed on the display screen.

•

Fan Mode

This mode only circulates the indoor air without changing the room temperature.

Turn the appliance on.

Press MODE button repeatedly to select the

Fan Mode.

is displayed on the display screen.

•

Press FAN SPEED button to adjust the fan

speed.

Auto Changeover Mode

Cooling & Heating Model

This mode changes the mode automatically to maintain the set temperature at ±2 °C

Turn the appliance on.

Press MODE button repeatedly to select the

Auto Changeover Mode.

•

is displayed on the display screen.

NOTE

• In this mode you cannot adjust the room temperature, it is adjusted automatically.

• The room temperature is not displayed on the display screen.

Press or button to set the desired temperature.

Press FAN SPEED button to adjust the fan

speed.

Auto Operation (Artificial Intelligence)

Cooling Only Model

This mode automatically sets the fan speed and temperature depending on the room temperature.

Turn the appliance on.

Press MODE button repeatedly to select the

Auto Operation.

•

is displayed on the display screen.

Press or button to select the desired operation code if the temperature is higher or lower than the desired temperature.

Code Description

2 Cool 1 Cool slightly 0 Maintain room temperature

-1 Heat slightly

-2 Heat

NOTE

• In this mode, you cannot adjust the fan speed, but you can set the air deflector to rotate automatically.

Using the Jet Mode Function

Changing Room Temperature Quickly

This function allows you to cool indoor air quickly during the summer or warm it quickly during winter.

• Cooling & Heating model : The Jet Mode function is available with Cooling, Heating and Dehumidification Mode.

• Cooling Only model : The Jet Mode function is available with Cooling, Dehumidification, Fan, Auto Operation Mode and Air Purification function.

Turn the appliance on.

Press MODE button repeatedly to select the

desired mode.

Press JET MODE button.

is displayed on the display screen.

•

NOTE

• Jet Heating Mode is not available on some models.

• In Jet Cooling Mode, strong air blows out at temperature of 18 °C for 30 minutes.

• After 30 minutes later, setting temperature is maintaining 18 °C If you want to change the temperature,

Press temperature.

• In Jet Heating Mode, strong air blows out at temperature of 30 °C for 30 minutes.

• After 30 minutes later, setting temperature is maintaining 30 °C If you want to change the temperature,

Press temperature.

• This function may operate differently from the remote control display.

or button to set the desired

→ →

→ → → →

SWING

Using the Fan Speed Function

Adjusting the Fan Speed

• Press FAN SPEED button repeatedly to adjust

the fan speed.

Display Screen Speed

High

Medium - High

Medium

Medium - Low

Low

- Natural Wind

NOTE

• The fan speed of natural air adjusts automatically.

• The fan speed icons are displayed on some indoor units.

• Indoor unit display is displayed only 5 seconds and return to the setting temperature on some models.

Using the Air Flow Direction Function

This function adjusts the direction of the air flow vertically (horizontally).

(

• Press the desired direction.

− Select air flow automatically.

NOTE

• Adjusting the air flow direction horizontally may not be supported, depending on the model.

• Adjusting the air deflector arbitrarily may cause product failure.

• If you restart the air conditioner, it starts to operate with the previously set direction of air flow, so the air deflector may not match the icon displayed on the remote control. When this occurs, press the direction of the air flow again.

• This function may operate differently from the remote control display.

) button repeatedly and select

( ) to adjust the direction of the

button to adjust

TIMER

CANCEL

Setting the On/Off Timer

This function sets the air conditioner to turn on/ off automatically at desired time.

Setting the On Timer

Press

• The icon below blinks at the bottom of the display screen.

Press or button to select the

minutes.

Press SET/CANCEL button to finish.

• After setting the timer, current time and icon are displayed on the display screen indicating that the desired time is set.

Canceling the On Timer

Press

• The icon below blinks at the bottom of the display screen.

button repeatedly.

Setting the Off Timer

Press

• The icon below blinks at the bottom of the display screen.

Press or button to select the

minutes.

Press SET/CANCEL button to finish.

• After setting the timer, current time and icon are displayed on the display screen indicating that the desired time is set.

NOTE

• This function is disabled when you set Simple Timer.

button repeatedly.

Canceling the Off Timer

Press

• The icon below blinks at the bottom of the display screen.

button repeatedly.

Press SET/CANCEL button to cancel the

setting.

Press SET/CANCEL button to cancel the

setting.

Canceling the Timer Setting

• Press

button to cancel all timer settings.

TIMER

Using the Sleep Function (Optional)

This function turns off the air conditioner automatically when you go to sleep.

Turn the appliance on.

Press

• The icon below blinks at the bottom of the display screen.

Press or button to select the hour

(up to 7 hours).

Press SET/CANCEL button to finish.

•

NOTE

• is displayed on some indoor units.

• Indoor unit display is displayed from 1H to 7H which is displayed only 5 seconds and then return to the setting temperature.

• In the Cooling and Dehumidification Mode, the temperature increases by 1 °C after 30 minutes and additional 1 °C after another 30 minutes for a more comfortable sleep.

• The temperature increases up to 2 °C from the preset temperature.

• Although the remark for fan speed on the display screen may be changed, the fan speed is adjusted automatically.

button repeatedly.

is displayed on the display screen.

Using the Simple Timer Function (Optional)

This function turns off the air conditioner automatically when you go to sleep.

Turn the appliance on.

Press

• The icon below blinks at the bottom of the display screen.

Press or button to select the hour

(up to 7 hours).

Press SET/CANCEL button to finish.

•

NOTE

• This function is disabled when you set Off Timer.

button repeatedly.

is displayed on the display screen.

kW [3 s]

kW kWh

kW [3 s]

kW kWh

℃↔℉ [5 s]

SWING

Using the Energy Display Function (Optional)

This function displays the amount of electricity generated on the indoor display as the product operates.

Display the Current Energy Usage

Turn the appliance on.

Press

seconds.

• The instantaneous power consumption (

Display the Cumulative Energy Usage (Optional)

Turn the appliance on.

Press

seconds twice.

• The cumulative power consumption (

NOTE

• It is not displayed on the wireless remote control.

• kW refers to instantaneous power consumption.

• kWh refers to cumulative power consumption.

• If it is more than 99 kWh which is the range of expression, maintain it as 99 kWh

• Power off resets its value.

• Display wattage under 10 kW with 0.1 kW(h) unit, and display one over 10 kW with 1 kW(h) unit.

• The actual power may differ from the power displayed.

button and hold it about 3

some indoor units.

) is displayed for a while on some indoor units.

) is displayed for a while on

button and hold it about 3

Using the Light Off Function (Optional)

Display Screen Brightness

You can set the brightness of the indoor unit display screen.

• Press LIGHT OFF button.

NOTE

• Turn on/off the Display screen.

Using the Comfort Air Function (Optional)

Comfort Vane Operation

This function conveniently sets the vane to a preset position to deflect the supply air away from blowing directly onto the occupants in the room.

Turn the appliance on.

Press COMFORT AIR button repeatedly and

select the desired direction.

•

or is displayed on the display

screen.

NOTE

• or is displayed on some indoor units.

• This function is disabled when you press

MODE or JET MODE button.

• This function is disabled and auto swing of

vertical direction is set up when you press button.

• When this function is off, the horizontal vane operates automatically depending on the set mode.

+ 53 hidden pages