LG V-CP663STR, V-CP663ST, V-CP663STS User Manual

V-CP663ST/STR/STS
English Deutsch
E D
LG Service Hotline Tel.: 01805-47378423 (0180-LGSERVICE)
–2–
2
3
7
6
1
9
10
6
7
8
10
9
11
12
18
8
4
45
5
– 3 –
12
11
13
14
MAX
16
22
17
18
20
21
23
24
25
15
19
– 4 –
E
Information for your safety
Information for your safety which contains important instructions for the safety, the use and the maintenance of the appliance. This appliance complies with the following EC Directives: -73/23/EEC, 93/68/EEC-Low Voltage Directive-89/336EEC -EMC Directive.
Never allow children to use the appliance unsupervised.
Do not use the appliance If the supply cord is damaged or faulty.
If the mains lead is damaged, it must be replaced by an approved LG Electronics Service Agent in order to avoid a hazard.
Always switch the vaccum cleaner off before :
changing the dust bag.
changing or cleaning the filters.
If no dustbag is inserted, the cover cannot be closed. Please do not use force!
Do not vacuum flammable or explosive substances(liquids or gases).
Do not vacuum hot ash, embers etc. nor sharp objects.
Do not vacuum water or other liquids.
How to Use
Connecting the flexible hose
Push the end of the head(1) on the flexible hose(2) into the attachment point on the vac­uum cleaner. Toremovetheflexiblehosefromvacuum cleaner, press on the button(3) situated on the head, then pull upwards.
Assembling the tubes
• Telescopic tube(4)
- Push spring latch(5) forward.
- Pull out tube to required length.
- Release spring latch to lock.
Using the cleaning head and Accessory Nozzles (depending on model)
Fit the large cleaning head onto the end of the tube.
The 2 position head(6) is equipped with a pedal(7) which allows you to alter its position according to the type of floor to be cleaned. Hard floor position(tiles, parquet floors...). Press on the pedal to lower the brush. Carpet or rug position. Press on the pedal to lift the brush up.
Crevice Tool(8)
For vacuuming in those normally inaccess­ible places i.e. reaching cobwebs, or down thesideofasofa!
Dusting brush(9)
For vacuuming picture frames furniture outlines, books and other uneven objects.
Upholstery Nozzle(10)
For vacuuming uphostery, mattresses, etc. The thread collectors help to pick up the threads and fluff.
Howtopluginanduse
Pull out the supply cord to the desired length and plug into the socket. Press button (12) to start the vacuum cleaner. To stop it press the button (12) again.
Adjusting the power level
If your appliance is equipped with an electronic variable power control(15),you can choose the power appropriated for the task. (depending on model)
The flexible hose handle(13) has a manual air flow regulator(14) which allows you to briefly reduce the suction level.
Park-System(16)
For short breaks during vacuuming, for example to move a small piece of furniture or arug,usethe
Park system to support the
flexible hose and cleaning head.
Slide the hook attached to the large cleaning tool into the slot on the rear of the appliance.
Storage(17)
When you have switched off and unplugged the appliance, press on the handle (11) to automatically rewind the cord. You can move or store your appliance in a vertical position by sliding the hook on the large cleaning head into the clip on the underside of the appliance.
Loading...
+ 8 hidden pages