LG V-CD201N Series, V-CD261H Series, V-CD281H Series, V-CD281N Series, V-CD261N Series Owner's Manual

Model

Language

Page

Material Size(W*H)

Designer

Designer

Confirm

Color(cover/body)

Part No. Description

Date

No. Date

Chage Record

Change content

ECO No.

Weight

1

2

3

4

5

6

7

8

9

ＣＫ３

ＥＮＧＬＩＳＨ

１６　ＰＡＧＥ

１００Ｇ

２／２

１９０＊２６０

２００６．０９．０４

ＭＦＬ３２９３０８０１　　　　　　　　　　　　　　　　　　　　　　　　　ＭＡＮＵＡＬ，ＯＷＮＥＲＳ

Ｗａｎｇｚｈｅｎｚｈｏｎｇ

drawing realization ACTT702608 2007.04.14 SONG1 CUIYT
drawing realization ACTT703604 2007.06.01 SONG1 CUIYT

V-CD201H*
V-CD201N*
V-CD281H*
V-CD281N*
V-CD261H*
V-CD261N*
V-CD241H*
V-CD241N*
V-CD211H*
V-CD211N*

Table of contents

2

Safety Information.....................................................................................................3

How to Use.................................................................................................................4

Assembling cleaner...............................................................................................................4

Using the cleaning head and Accessory Nozzles..................................................................6

Emptying the Dust Chamber .................................................................................................8

Operating the cleaner............................................................................................................9

Cleaning the Filter ................................................................................................................10

Cleaning the Exhaust Filter ....................................................................................................11

Troubleshooting...................................................................................................................12

Safety Information

3

Please read the following information, which contains important instructions for
the use and maintenance of the appliance.
This appliance complies with the following EC Directives: -73/23/EEC,
93/68/EEC-Low Voltage Directive-89/336EEC -EMC Directive.

Do not use the appliance if the power cord is damaged or faulty.
If the power cord is damaged, it must be replaced by an approved LG Electronics Service Centre.
Always switch the vacuum cleaner off before:

Emptying the dust chamber.

Cleaning or changing the filters.
Do not vacuum flammable or explosive substances(liquids or gases).
Do not vacuum hot ash, embers etc. nor sharp objects.
Do not vacuum water or other liquids.
Do not unplug by pulling on cord.
Use only LG's recommended filters.
When you vacuum with an attachment appliance that has a rotating brush roller:

Do not reach into the running brush roller.
The application is not intended for use by young children or infirm persons without supervision.

Thermal protector: This vacuum cleaner has a special thermostat that protects the cleaner in
case of motor overheating. If the cleaner suddenly shuts off, turn off the switch and unplug the
cleaner. Check the cleaner for a possible source of overheating such as a full dust chamber, a blocked
hose or clogged filter. If blockage or obstruction is located, remove and wait at least 30 minutes
before attempting to use the cleaner. After the 30 minutes period, plug the cleaner back in and
turn on the switch. If the cleaner still does not run, please contact your approved LG service centre.

The appliance is not intended for use by young children or infirm persons without supervision.
Young Children should be supervised to ensure that they do not play with appliance.
If the appliance is supplied from a cord extension set or an electrical portable outlet device,
the cord extension set on electrical portable outlet device must be positioned so that it is not subject to splashing
or ingress of moisture.

Assembling Cleaner

Fit the large cleaning head into the end of the tube.

Spring latch

Elbow

Telescopic
tube

2

1

NT**
NE**

HT**
HE**

1

The 2 position head
(depending on model)

2

Telescopic tube
(depending on model)

Push telescoopic tube into
nozzle outlet.

• Press the spring latch to release.

• Pull out the tube to the desired length.

• Release spring latch to lock the tube in
position.

• Push telescopic tube into hose handle firmly.

4

3

5

Connecting the flexible hose

• Push the end of the head on the flexible hose
into the attachment point on the vacuum cleaner.

• To remove the flexible hose from the vacuum
cleaner, press on the button situated on the head,
then pull the head out of the vacuum cleaner.

CAUTION

• Suction power may be weakened when insignificant dusts
are sucked. In this case, clean the filter.

• Make the dust box empty if dusts are filled to the maximum
degree and then clean the filter when it becomes 5 times.

Attachment Point

Head

Button

Flexible Hose

HT**
HE**

NT**
NE**