LG T90SJSF1Z, T70SJAS1Z, T90SJAS1Z Owner’s Manual

OWNER'S MANUAL

WASHING MACHINE

Please read this manual carefully before operating washing machine and retain it for future reference

T65SJ T70SJ T80SJ T90SJ T10SJ

T65SN

T70SN

T80SN

* * *

MFL68486520

Rev.00_150720

* * *

T65SP

T70SP

T7288

www.lg.com

ontents

READ THIS MANUAL

Inside you will find many helpful hints on how to use and maintain your washer properly. Just a little preventive care on your part can save you a great deal of time and money over the life of your washer. You will find many answers to common problems in the Troubleshooting section. If you review our chart of Troubleshooting Tips first, you may not need to call for service at all.

Introduction

Installation

Before Starting to Wash

Washing Programs

Additional Function Program

Care and Maintenance

Troubleshooting

Installation Check sheet Terms of Warranty

Features & Specifications

Safety Information

Product Feature

Identification of Parts

Placing, Leveling & Installation

Connecting water supply Hose & Drain Hose

Preparation Before Washing

Use of Water, Detergent, Bleach and Softener

Special Guide for Stain Removal 15

Control Panel

Other Useful Functions

Normal

Quick Wash

Gentle (Wool/Saree)

Turbo Wash

Strong ( Jeans)

Tub Clean

Aqua Reserve Wash

Pre Wash Normal Wash

Favourite Wash

AIR DRY ENERGY SAVING GUIDE Smart Closing Door

Soak Wash

Option Washing

DELAY START (RESERVATION) Wash Cleaning and Maintenance

Common Washing Problems

Troubleshooting

Earthing Smart Diagnosis

Disposal of old appliance

Installation Check sheet

Warranty

Features & Specifications

Page No

20 21 22

* Product feature may vary according to different models. Refer page 35 for modelwise features for your purchased model.

afety Information

Read carefully and thoroughly go through this booklet as it contains important safety information that will protect the user from unexpected dangers and prevent potential damages to the product.

This booklet is divided into 2 parts : Warning and Caution.

: This is a warning sign specifying user’s applications which might be dangerous.

: This is a sign specifying ‘Strictly Forbidden’ applications.

Failure to comply with the instructions under this

WARNING

sign may result in major physical injuries or death.

CAUTION

Disclaimer : The user should follow the instructions as per the owner’s manual to avoid any malfunctioning of the product, accident or damage.

The manufacturer is not liable for any accident or consequential or resulting liability, damage or loss to property or life arising directly or indirectly from the product. The manufacturer's liability is limited only to the extent of repair or replacement of the product as per the terms and condition mentioned elsewhere in the document.

: Failure to comply with the instructions under this sign may result in minor physical injuries or damages to the product.

WARNING

•

Make sure the plug is completely pushed into the outlet.

Failure to do so may cause electric shock and fire due to overheating.

PROPER INSTALLATION

CAUTION

•

Machine must be positioned so that the plug is accessible.

If the plug is placed between the wall and the machine, it may get damaged, possibly causing fire or electric shock.

• Washer shall be placed in dry areas specifically during rainy season.

• Washer shall be placed in dry areas specifically during rainy season. Humid conditions may cause rusting which may result in product failure.

• •

The base opening must not be obstructed by carpeting when the washing machine is installed on a carpeted floor.

•

Install or store where it will not be exposed to temperature below freezing or exposed to the weather (Rain/Water Splash/ Direct Sunlight).

If the product is exposed to such conditions, electric shock, fire, break down or deformation may occur.

afety Information

• Keep the area underneath and around your appliances free of combustible materials such as lint, paper, rags, chemical, etc.

Operating with such materials around the machine may trigger explosion or fire.

• Close supervision is necessary if this appliance is used by or near children.

Do not allow children to play on, with, or inside this or any other appliance.

There is potential danger that children might drown in the tub.

YOUR LAUNDRY AREA

WARNING

Do not touch the Power Plug with a wet hand.

It will cause electric shock

CAUTION

Do not put your hand, foot or anything under the washing machine while the washing machine is in operation.

There is a rotating mechanism under the machine, so you could be injured.

• Do not put or keep any magnet near Lid of Washer, it will result in Malfunctioning of the Product.

WHEN USING THE WASHER

Children should be supervised to ensure that they do not operate or play with the appliance. Inconstancy to this may damage machine,

serious injury and electrical shock.

Do not use power plug, power socket outlet and wiring equipment for more than their rated capacity.

for laundry

or Tub Wash.

afety Information

• Disconnect the Washer from the household distribution panel by removing the Power Plug from Power Socket outlet before attempting any maintenance or cleaning

Inconstancy to this may Cause electrical shock

• Make sure that drainage is working properly.

If water is not drained properly, your floor may get flooded. Flooded floors may induce electricity leakage, further resulting in electric shock or fire.

• If, during spinning, opening the lid does not stop the tub within about 15 second, immediately discontinue operating the machine.

Call for repair. A machine that spins with its door open may cause injuries.

WHEN USING THE WASHER

Do not use washer for any other purpose other than its intended purpose.

- Use this appliance only for household purpose. Do not use water hotter than 60°C.

Do not connect washer to hot water supply.

WARNING

Never reach into the machine while it is running. Wait until the machine has completely stopped before opening the lid.

Even slow rotation can cause injury.

Never attempt to operate this appliance if it is damaged, malfunctioning, partially disassembled, or has missing or broken parts, including a damaged cord or plug.

Operating with a damaged plug may cause electric shock.

CAUTION

Use of excessively hot water may cause damage to fabrics or cause leakage of water.

Ensure No water logging near or below washer to prevent rusting.

Rusting on certain parts may result in product failure

WHEN NOT IN USE

WARNING

Customer may Slip too.

Using unclean power socket plug may cause fire.

Do not use wet cloth to clean the machine, Always use dry cotton cloth.

Turn off the water faucets to relieve pressure on hoses; they may need Replacement after 5 Years Inconstancy to this may rupture hose which leads to water Leakage.

roduct Features

Pre Wash Normal



The purpose of this program is to deliver best Wash Performance by adding extra 8 min of uniquely designed washing pattern before the main wash cycle.

Jet Spray+



A technology uniquely designed to spray inlet water with greater force to penetrate deep into the clothes to bring out the best washing and rinsing performance.

Smart Closing Door



Smart hinge prevents sudden closing of the door. Gives you a soft and safe door closing.

Turbowash*



Turbowash program delivers high wash performance in least cycle time using revolutionary Jetspray+ technology which optimizes water & energy consumption.

Normal logic control



A built-in load sensor automatically detects the laundry load and a microprocessor optimizes washing conditions such as ideal WATER LEVEL and washing time.



Advanced technology is built into the Electronic Control System which ensures the best washing result.

TurboDrum washing



When "Punch + 3" washing wings turn, the washing tub turns in the opposite direction. This makes the both sides current of water which improve wash-performance by rubbing clothes strongly.

Washer doesn't operate while the lid is opened. If the lid is opened during the wash, rinse or spin cycles, the operation stops for safety.

SENSING

START

Laundry Sensor

Water Level Sensor

SETTING

Optimum Washing Condition

WASHING

AUTO

POWER

OFF

3 Step washing



3 step washing makes the best washing performance with low tangling.

Rubbing

Rubbing and

Shaking

Shaking and

Disentangling

Smart Diagnosis



It is the technology to transmit the anomalies to the service center when there is a problem with the washer. It provides the service that gives faith and trust to the customers through precise and fast analysis.

Auto Restart



Auto Restart allows the program to restart all by itself in case of power failure. It resumes from stage where it stopped, however, the wash cycle time may vary.

# Works during Wash cycle in Normal, Pre Wash+ Normal, Turbo Wash & Aqua Reserve from WL1 to 7 and during Rinse cycle in Normal, Pre Wash+ Normal, Turbo Wash & Aqua Reserve Programs at all water levels. Jet Spray performance may vary with Inlet water pressure, for optimum results pressure should be > 0.9 Bar

Product feature may vary according to different models. Refer page 35 for modelwise features for your purchased model.

Body

dentification of Parts

Smart Hinge

POWDER DETERGENT BOX

MAGIC FILTER

Clean regularly to stop linting on the clothes load.

SOFTENER INLET

BLEACH DISPENSER

FUNCTION SELECTOR

TUB

START/PAUSE BUTTON

Use to start or stop the washing machine temporarily.

ADJUSTABLE LEGS

Use to level the washing machine for correct balance & spin operation.

Accessories

WATER SUPPLY HOSE

Make sure the water does not leak.

POWER PLUG

If the supply cord is damaged, it must be

Do not open

replaced by the manufacturer or its service agents or similarly qualified person in order to avoid a hazard.

JET SPRAY NOZZLE

Depending upon the Inlet Water Pressure, performance of Jet Spray may vary. (Works in Normal, Turbo Wash,

Pre Wash Normal & Aqua Reserve Wash Programs).

CASTORS

Use for easy translocation (at rear bottom edge)

DRAIN HOSE

Keep the drain hose flipped down while washing is in progress.

BASE

Water supply hose

Drain hose

Anti-rat cover

For Cold Water

Snap Ring

NOTE

“ ” Parts can be different as per purchased model.

Please do not match this figure with model as it may be different from your model .These are schematic diagrams only. Due to continuous improvements at LG, specification of washing machine are subject to change without prior notice.

lacing, Leveling and Installation

Improper installation of the washer may cause noise and malfunctioning.

Note :

The ventilating openings in the base area must not be obstructed by carpeting when the washing machine is

installed on a carpeted floor.

Install the washing machine on a level and firm

2. surface.

3. Handle all packaging materials (such as plastic

bags and thermacol) to keep away from children. The packaging materials can cause suffocation.

How to adjust leveling

Adjustable leg

Turn the adjustable legs to set the washer horizontal (Both the front legs).



Don't add anything under back side legs.

Distance between drain hose and the wall

Distance between drain hose and the wall should be more than 10cm, and the distance between the other part or the rear part and the wall should be more than 2 cm.

More than 10cm

Installation area

Install the washer on flat and firm surface.

Checking level

The Basement is not flat, fill the water just touching the Pulsator and see uniform distribution. If not, adjust the legs as shown in the figure.

Checking Proper placement

Top View

More than 2cm

Press the corners of the machine diagonally as shown in the figure, If any movement is observed, adjust the legs for proper leveling.

# Moving of the Machine

Anti-rat cover installation

Insert the Anti rat cover firmly from back side side of washing machine.

Be sure to remove the product from the carton base, otherwise the machine will not be able to operate properly.

# Product feature may vary according to different models. Refer page 35 for model wise features for your purchased model. Please do not match the figures with model as it may be different from your model. These are schematic diagrams only.

Casters are provided for easy translocation of your machine

* Grip the machines properly as shown in fig. * Tilt the machine towards your side at a angle

O O

45 ~ 55 .

Casters

Note : * Be careful that you should not drop the machine.

* Never move the machine on casters when there is load inside.

onnecting Water Supply Hose & Drain Hose

Water Supply Hose

Normal Type

Separate Middle connector from Water Supply Hose

Separate Middle connector from the Water Supply Hose by pulling the Pressing Rod and the Pressing Handle that is attached to the Water Supply Hose

Loosen the fixed nuts to connect the connector to the tap

Untighten the screw of the connector so that the tap can be placed in the middle.

NOTE

(Normal tap without thread & one touch type inlet hose.)

Middle connector

In case tap is too large.

If the tap diameter is too large or is square, untighten the 4 screws and remove the guide plate. Then follow step1

Fixing Connectors to the Tap

Push the upper connector up till the rubber packing is in tight contact with the tap. Then tighten the 4 screws

Fixing Upper Connector and Middle Connector

Remove the fixed sticker in between the Upper and Middle Connectors. Tighten the connectors by holding one connector and twist middle connector to the right.

Guide plate

Connector

Pressing Handle

Pressing Rod

Water Supply Hose

Rubber packing

Middle Connector

Rubber packing screw

Connector Middle Connector

Connecting Middle Connector and Water Supply Hose

Press down the pressing rod of the Water Supply Hose which was separated from middle connector (refer to Step1) and then join it to the middle connector.

Water Supply Hose

Check for water leakage

After connecting the check for any water leakage.

If the connection leaks, close the tap and start again from step 1. If you skip step 1, water leakage may occur.

other end of hose to machine open the tap to

Pressing rod

Pressing handle

After connecting inlet hose to water faucets, turn on the water faucets to flush out foreign substances (dirt, sand, or sawdust) in the water lines. Let water drain into a bucket, and check the water condition.

For your safety and for extended product life, use only authorized components. The manufacturer is not responsible for product malfunction or accidents caused by the use of separately purchased unauthorized parts.

Use new hoses when you install the washing machine. Do not reuse old hoses. Use only the inlet hoses provided with the washer . LG does not recommend the use of aftermarket hoses.

Periodically check the hoses for cracks, leaks and wear, and replace the hoses every 5 years. Do not stretch the water hoses intentionally, and make sure that they are not crushed by other objects.

Connecting Water Supply Hose to Washer

Check to see if there is a rubber seal inside the connector. Connect the water supply hose to inlet valve of the washing machine, and then lock it by turning the hose connecting part.

Drain Hose

Connecting the Drain Hose to Washer

Insert the drain hose to the connecting area at the body.

1 2

Press the hose clip. While pressing, push the hose towards

the body. Release the hose clip after pushing the

hose.

Less than 2m

The hose is placed over a doorsill.

The hose is clogged by

alien substances.

Make sure that the hose is not crushed.

Less than 3m

If Extension hose is used

should be less than 3m

Less than 6cm

Less than 10cm

Make sure that the hose is not crushed between the wall and the washer

Avoid submerging the end of hose.

reparation Before Washing

Care Labels

Look for a care label on your clothes. This will tell you about the fabric content of your garment and how it should be washed. Sort clothes into loads that can be washed with the same wash cycle.

Sorting

To get the best results, different fabrics need to be washed in different ways.

• SOIL (Heavy, Normal, Light) COLOR (Whites, Lights, Darks)

• LINT (Lint Producers, Collectors)

•

Lint Producers Lint Collectors

Check before Loading

• Check all pockets to make sure that they are emtpy. Things such as nails, hairclips, matches, pens, coins, and keys can damage both your washer and your clothes.

• Mend any torn garments or loose buttons. Tears or holes may become larger during washing.

• Remove belts, underwires, etc. to prevent damage to the machine or your clothes.

• Pretreat any dirt and stains.

• Make sure the clothes are washable in water.

• Check the washing instructions.

• Remove tissue from pockets.

Do not wash or spin any item labeled or known to be water-proof or water-resistant, even if the product care label on the item permits machine washing. Failure to follow these instructions could result in severe damage to your laundry, your washer and/or

property damage as a result of abnormal vibration of the washer.

- Examples of water-proof or water-resistant items include certain mattress pads, mattress covers, rain gear, camping gear, skiing apparel, outdoor gear and similar items.

Pretreatment on stains or heavy soil

• Pretreat shirt collars and cuffs with a pre-wash product or liquid Detergent when placing them in the washer. Before washing treat special stains with bar soaps, liquid Detergent or a paste of water and granular Detergent.

• Use a pretreat soil and stain remover. Treat stains AS SOON AS POSSIBLE. The longer they are left the harder they are to remove.

(For more detail refer to page15)

Do not wash fabrics containing flammable materials

(waxes, cleaning fluids, etc.)

Load Size

The WATER LEVEL should just cover the clothes. Adjust the load size accordingly. Loosely load clothes not higher than the top row of holes in the washer tub. To add items after washer has started, press Start button and submerge additional items. Close the lid and press Start button again to restart.

Separate clothes according to the type and amount of soil. Separate white fabrics from colored fabrics. Separate lint producers and lint collectors.

Terry cloth, Towels, Nappies, Diapers Synthetics, Socks

CAUTION

Fire Hazard

Never place items in the washer that are dampened with gasoline or other flammable fluids. No washer can completely remove oil. Do not dry anything that has ever had any type of oil on it (including cooking oils). Doing so can result in death, explosion, or fire.

WIRE

WARNING

Light and Large-sized clothing

Clothes like downs and woollens are light weight, large and float easily. Use a nylon net and wash them in a small amount of water. If the laundry floats during the wash cycle, it may become damaged. Use dissolved Detergent to prevent the Detergent from clumping.

Long laundry items

Use nylon nets for long, DELICATE items. For laundry with long strings or long length , a net will prevent tangling during washing. Fasten zippers, hook, and strings to make sure that these items don't snag on other clothes.

Nylon net is not supplied by LG.

+ 25 hidden pages