LG T65SKSF1Z, T7585NDDLGA Owner’s Manual

OWNER'S MANUAL

WASHING MACHINE

ENGLISH

Please read this manual carefully before operating Washing Machine and retain it for future reference

T60SK

T65SK

T7585

T70SK

MFL68486521

Rev.00_210720

www.lg.com

ontents

Inside you will find many helpful hints on how to use and maintain your washer properly. Just a little preventive care on your part can save you a great deal of time and money over the life of your washer. You will find many answers to common problems in the Troubleshooting section. If you review our chart of Troubleshooting Tips first, you may not need to call for service at all.

I ro on

Installation

B St rt Wash

Washing Programs

Additional Function Program

Care,Maintenance & Troubleshooting

Terms of Warranty

Installation Check Sheet Features & Specifications

Safety Information

Product Features Identification of Parts 7

Placing, Leveling and Installation

Connecting water supply Hose & Drain Hose

Preparation Before Washing

Use of Water, Detergent, Bleach and Softener

Special Guide for Stain Removal

Control Panel

Normal Gentle (Wool)

Quick Wash Strong (Jeans) Wash

Pre Wash + Normal wash

Aqua Reserve

Rinse+

Option Washing

Tub Clean

Other Useful Function

Earthing

Smart Diagnosis Cleaning and Maintenance

Use of Handle Locker Disposal of old appliance

Common washing problems Troubleshooting Warranty

Installation Check Sheet Features & Specifications

Page No

18 18

25 26 27 29

* Product feature may vary according to diﬀerent models. Refer page 31 for modelwise features for your purchased model.

afety Information

Read carefully and thoroughly go through this booklet as it contains important safety information that will protect the user from unexpected dangers and prevent potential damages to the product.

This booklet is divided into 2 parts : Warning and Caution.

: This is a warning sign specifying user’s applications which might be dangerous.

: This is a sign specifying ‘Strictly Forbidden’ applications.

Failure to comply with the instructions under this

WARNING

sign may result in major physical injuries or death.

CAUTION

Disclaimer : The user should follow the instructions as per the owner’s manual to avoid any malfunctioning of the product, accident or damage.

The manufacturer is not liable for any accident or consequential or resulting liability, damage or loss to property or life arising directly or indirectly from the product. The manufacturer's liability is limited only to the extent of repair or replacement of the product as per the terms and condition mentioned elsewhere in the document.

: Failure to comply with the instructions under this sign may result in minor physical injuries or damages to the product.

WARNING

•

Make sure the plug is completely pushed into the outlet.

Failure to do so may cause electric shock and fire due to overheating.

PROPER INSTALLATION

CAUTION

•

Machine must be positioned so that the plug is accessible.

If the plug is placed between the wall and the machine, it may get damaged, possibly causing fire or electric shock.

• Washer shall be placed in dry areas specifically during rainy season.

• Washer shall be placed in dry areas specifically during rainy season. Humid conditions may cause rusting which may result in product failure.

• •

The base opening must not be obstructed by carpeting when the washing machine is installed on a carpeted floor.

•

Install or store where it will not be exposed to temperature below freezing or exposed to the weather (Rain/Water Splash/ Direct Sunlight).

If the product is exposed to such conditions, electric shock, fire, break down or deformation may occur.

afety Information

• Keep the area underneath and around your appliances free of combustible materials such as lint, paper, rags, chemical, etc.

Operating with such materials around the machine may trigger explosion or fire.

• Close supervision is necessary if this appliance is used by or near children.

Do not allow children to play on, with, or inside this or any other appliance.

There is potential danger that children might drown in the tub.

YOUR LAUNDRY AREA

WARNING

Do not touch the Power Plug with a wet hand.

It will cause electric shock

CAUTION

Do not put your hand, foot or anything under the washing machine while the washing machine is in operation.

There is a rotating mechanism under the machine, so you could be injured.

• Do not put or keep any magnet near Lid of Washer, it will result in Malfunctioning of the Product.

WHEN USING THE WASHER

Children should be supervised to ensure that they do not operate or play with the appliance. Inconstancy to this may damage machine,

serious injury and electrical shock.

Do not use power plug, power socket outlet and wiring equipment for more than their rated capacity.

for laundry

or Tub Wash.

afety Information

• Disconnect the Washer from the household distribution panel by removing the Power Plug from Power Socket outlet before attempting any maintenance or cleaning

Inconstancy to this may Cause electrical shock

• Make sure that drainage is working properly.

If water is not drained properly, your floor may get flooded. Flooded floors may induce electricity leakage, further resulting in electric shock or fire.

• If, during spinning, opening the lid does not stop the tub within about 15 second, immediately discontinue operating the machine.

Call for repair. A machine that spins with its door open may cause injuries.

WHEN USING THE WASHER

Do not use washer for any other purpose other than its intended purpose.

- Use this appliance only for household purpose. Do not use water hotter than 60°C.

Do not connect washer to hot water supply.

WARNING

Never reach into the machine while it is running. Wait until the machine has completely stopped before opening the lid.

Even slow rotation can cause injury.

Never attempt to operate this appliance if it is damaged, malfunctioning, partially disassembled, or has missing or broken parts, including a damaged cord or plug.

Operating with a damaged plug may cause electric shock.

CAUTION

Use of excessively hot water may cause damage to fabrics or cause leakage of water.

Ensure No water logging near or below washer to prevent rusting.

Rusting on certain parts may result in product failure

WHEN NOT IN USE

WARNING

Customer may Slip too.

Using unclean power socket plug may cause fire.

Do not use wet cloth to clean the machine, Always use dry cotton cloth.

Turn off the water faucets to relieve pressure on hoses; they may need Replacement after 5 Years Inconstancy to this may rupture hose which leads to water Leakage.

roduct Features

Pre Wash Normal

The purpose of this program is to deliver best Wash Performance by adding extra 8 min of uniquely designed washing pattern before the main wash cycle.

Normal logic control

A built-in load sensor automatically detects the laundry load and a microprocessor optimizes washing conditions such as ideal WATER LEVEL and washing time.

Advanced technology is built into the Electronic Control System which ensures the best washing result.

Turbo Drum washing

When Washing Pulsator turn, the washing tub turns in the opposite direction. This makes the both sides current of water which improve wash-performance by rubbing clothes strongly.

3 Step washing

3 step washing makes the best washing performance with low tangling.

Washer doesn't operate while the lid is opened. If the lid is opened during the wash, rinse or spin cycles, the operation stops for safety.

SENSING

START

Laundry Sensor

Water Level Sensor

SETTING

Optimum Washing Condition

WASHING

AUTO

POWER

OFF

Rubbing

Rubbing and

Shaking

Shaking and

Disentangling

Smart Diagnosis

It is the technology to transmit the anomalies to the service center when there is a problem with the washer. It provides the service that gives faith and trust to the customers through precise and fast analysis.

Auto Restart

Auto Restart allows the program to restart all by itself in case of power failure. It resumes from stage where it stopped, however, the wash cycle time may vary.

Product feature may vary according to different models. Refer page 31 for modelwise features for your purchased model.

dentification of Parts

Body

POWDER DETERGENT BOX

MAGIC FILTER

Clean regularly to stop linting on the clothes load.

SOFTENER INLET

BLEACH DISPENSER

FUNCTION SELECTOR

TUB

START/PAUSE BUTTON

Use to start or stop the washing machine temporarily.

ADJUSTABLE LEGS

Use to level the washing machine for correct balance & spin operation.

Accessories

WATER SUPPLY HOSE

Make sure the water does not leak.

POWER PLUG

If the supply cord is damaged, it must be

Do not open

replaced by the manufacturer or its service agents or similarly qualified person in order to avoid a hazard.

CASTORS

Use for easy translocation (at rear bottom edge)

DRAIN HOSE

Keep the drain hose flipped down while washing is in progress.

BASE

Water supply hoses

NOTE

“ ” Parts can be different according to the model.

Please do not match this figure with model as it may be different from your model .These are schematic diagrams only. Due to continuous improvements at LG, specification of washing machine are subject to change without prior notice.

Drain hose

Snap Ring

Anti-rat cover

lacing, Leveling and Installation

Improper installation of the washer may cause noise and malfunctioning.

Note :

The ventilating openings in the base area must not be obstructed by carpeting when the washing machine is

installed on a carpeted floor.

Install the washing machine on a level and firm

2. surface.

3. Handle all packaging materials (such as plastic

bags and thermacol) to keep away from children. The packaging materials can cause suffocation.

How to adjust leveling

Adjustable leg

Turn the adjustable legs to set the washer horizontal (Both the front legs).

Don't add anything under back side legs.

Distance between drain hose and the wall

Distance between drain hose and the wall should be more than 10cm, and the distance between the other part or the rear part and the wall should be more than 2 cm.

More than 10cm

Installation area

Install the washer on flat and firm surface.

Checking level

The Basement is not flat, fill the water just touching the Pulsator and see uniform distribution. If not, adjust the legs as shown in the figure.

Checking Proper placement

Top View

More than 2cm

Press the corners of the machine diagonally as shown in the figure, If any movement is observed, adjust the legs for proper leveling.

# Moving of the Machine

Anti-rat cover installation

Insert the Anti rat cover firmly from back side side of washing machine.

Be sure to remove the product from the carton base, otherwise the machine will not be able to operate properly.

# Product feature may vary according to different models. Refer page 31 for model wise features for your purchased model. Please do not match the figures with model as it may be different from your model. These are schematic diagrams only.

Casters are provided for easy translocation of your machine

* Grip the machines properly as shown in fig. * Tilt the machine towards your side at a angle

O O

45 ~ 55 .

Casters

Note : * Be careful that you should not drop the machine.

* Never move the machine on casters when there is load inside.

onnecting Water Supply Hose & Drain Hose

Water Supply Hose

Normal Type

Separate Middle connector from Water Supply Hose

Separate Middle connector from the Water Supply Hose by pulling the Pressing Rod and the Pressing Handle that is attached to the Water Supply Hose

Loosen the fixed nuts to connect the connector to the tap

Untighten the screw of the connector so that the tap can be placed in the middle.

NOTE

In case tap is too large.

If the tap diameter is too large or is square, untighten the 4 screws and remove the guide plate. Then follow step1

Fixing Connectors to the Tap

Push the upper connector up till the rubber packing is in tight contact with the tap. Then tighten the 4 screws

Fixing Upper Connector and Middle Connector

Remove the fixed sticker in between the Upper and Middle Connectors. Tighten the connectors by holding one connector and twist middle connector to the right.

(Normal tap without thread & one touch type inlet hose.)

Middle connector

Guide plate

Connector

Pressing Handle

Pressing Rod

Water Supply Hose

Rubber packing screw

Rubber packing

Middle Connector

Connector Middle Connector

Connecting Middle Connector and Water Supply Hose

Press down the pressing rod of the Water Supply Hose which was separated from middle connector (refer to Step1) and then join it to the middle connector.

Water Supply Hose

Check for water leakage

After connecting the check for any water leakage.

If the connection leaks, close the tap and start again from step 1. If you skip step 1, water leakage may occur.

other end of hose to machine open the tap to

Pressing rod

Pressing handle

After connecting inlet hose to water faucets, turn on the water faucets to flush out foreign substances (dirt, sand, or sawdust) in the water lines. Let water drain into a bucket, and check the water condition.

For your safety and for extended product life, use only authorized components. The manufacturer is not responsible for product malfunction or accidents caused by the use of separately purchased unauthorized parts.

Use new hoses when you install the washing machine. Do not reuse old hoses. Use only the inlet hoses provided with the washer . LG does not recommend the use of aftermarket hoses.

Periodically check the hoses for cracks, leaks and wear, and replace the hoses every 5 years. Do not stretch the water hoses intentionally, and make sure that they are not crushed by other objects.

Connecting Water Supply Hose to Washer

Check to see if there is a rubber seal inside the connector. Connect the water supply hose to inlet valve of the washing machine, and then lock it by turning the hose connecting part.

Drain Hose

Connecting the Drain Hose to Washer

Insert the drain hose to the connecting area at the body.

1 2

Press the hose clip. While pressing, push the hose towards

the body. Release the hose clip after pushing the

hose.

The hose is placed over a doorsill.

The hose is clogged by

alien substances.

Make sure that the hose is not crushed.

If Extension hose is used

should be less than 3m

Less than 10cm

Make sure that the hose is not crushed between the wall and the washer

Avoid submerging the end of hose.

+ 22 hidden pages