LG T1066NEFVF2 Owner’s Manual
global_main.book.book Page 1 Monday, May 25, 2020 9:40 AM
OWNER'S MANUAL
WASHING MACHINE
Before beginning installation, read these instructions carefully. This will simplify installation and ensure that the product is installed correctly and safely. Leave these instructions near the product after installation for future reference.
EN ENGLISH FR FRANÇAIS PT PORTUGUÊS
T1066NEFVF2
www.lg.com
MFL70702223 |
|
Rev.02_110520 |
Copyright © 2020 LG Electronics Inc. All Rights Reserved. |
global_main.book.book Page 2 Monday, May 25, 2020 9:40 AM
TABLE OF CONTENTS
This manual may contain images or content that may be different from the model you purchased.
This manual is subject to revision by the manufacturer.
SAFETY INSTRUCTIONS |
|
READ ALL INSTRUCTIONS BEFORE USE........................................................... |
3 |
WARNING............................................................................................................ |
3 |
INSTALLATION |
|
Parts and Specifications .................................................................................... |
8 |
Installation Place Requirements .................................................................... |
10 |
Connecting the Water Inlet Hoses................................................................. |
11 |
Installing the Drain Hose ................................................................................ |
12 |
Levelling the Appliance ................................................................................... |
12 |
OPERATION |
|
Operation Overview......................................................................................... |
14 |
Preparing Laundry ........................................................................................... |
14 |
Adding Detergents, Softeners and Bleaches................................................ |
16 |
Control Panel .................................................................................................... |
18 |
Programme....................................................................................................... |
19 |
Extra Options and Functions .......................................................................... |
20 |
SMART FUNCTIONS |
|
LG ThinQ Application....................................................................................... |
24 |
Smart Diagnosis ............................................................................................... |
24 |
MAINTENANCE |
|
Cleaning after Every Wash.............................................................................. |
25 |
Cleaning the Appliance Periodically .............................................................. |
25 |
TROUBLESHOOTING |
|
Before Calling for Service................................................................................ |
29 |
global_main.book.book Page 3 Monday, May 25, 2020 9:40 AM
SAFETY INSTRUCTIONS 3 EN
SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
The following safety guidelines are intended to prevent unforeseen risks or damage from unsafe or incorrect operation of the appliance.
The guidelines are separated into ‘WARNING’ and ‘CAUTION’ as described below.
Safety Messages
This symbol is displayed to indicate matters and operations that can cause risk.
Read the part with this symbol carefully and follow the instructions in order to avoid risk.
WARNING
This indicates that the failure to follow the instructions can cause serious injury or death.
CAUTION
This indicates that the failure to follow the instructions can cause minor injury or damage to the product.
WARNING
WARNING
To reduce the risk of explosion, fire, death, electric shock, injury or scalding to persons when using this product, follow basic precautions, including the following:
Technical Safety
•This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision
global_main.book.book Page 4 Monday, May 25, 2020 9:40 AM
EN 4 SAFETY INSTRUCTIONS
or instruction concerning use of the appliance by a person responsible for their safety.
•Children should be supervised to ensure that they do not play with the appliance.
•Cleaning and user maintenance shall not be made by children without supervision.
•If the power cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
•Ventilation openings must not be obstructed by a carpet.
•This appliance is intended to be used in household only.
•Use a new hose or hose-set supplied with the appliance. Reusing old hoses can cause a water leak and subsequent property damage.
•The inlet water pressure must be between 50 and 800 kPa.
Maximum Capacity
The maximum capacity in some cycles for dry clothes to be washed is
10.0 kg.
Installation
•Never attempt to operate the appliance if it is damaged, malfunctioning, partially disassembled, or has missing or broken parts, including a damaged cord or plug.
•This appliance should only be transported by two or more people holding the appliance securely.
•Do not install the appliance in a damp and dusty place. Do not install or store the appliance in any outdoor area, or any area that is subject to weathering conditions such as direct sunlight, wind, rain, or temperatures below freezing.
•Make sure the power plug is completely pushed into the power outlet.
•Do not plug the appliance into multiple outlet sockets or an extension power cable.
global_main.book.book Page 5 Monday, May 25, 2020 9:40 AM
SAFETY INSTRUCTIONS 5 EN
•Do not modify the power plug provided with the appliance. If it does not fit the power outlet, have a proper outlet installed by a qualified electrician.
•This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current.
•This appliance is equipped with a power cord having an equipmentgrounding conductor and a grounding power plug. The power plug must be plugged into an appropriate outlet socket that is installed and grounded in accordance with all local codes and ordinances.
•Improper connection of the equipment-grounding conductor can result in risk of electric shock. Check with a qualified electrician or service personnel if you are in doubt as to whether the appliance is properly grounded.
•Tighten and secure the drain hose at connecting ends to avoid separation.
•For models with only one inlet water supply valve, do not connect to hot water. Connect to cold water only.
Operation
•Do not apply any sharp objects to the control panel in order to operate the appliance.
•Do not attempt to separate any panels or disassemble the appliance.
•Do not repair or replace any part of the appliance. All repairs and servicing must be performed by qualified service personnel unless specifically recommended in this Owner's Manual. Use only authorized factory parts.
•Do not put animals, such as pets into the appliance.
•Keep the area underneath and around the appliance free of combustible materials such as lint, paper, rags, chemicals, etc.
•Do not leave the appliance door open. Children may hang on the door or crawl inside the appliance, causing damage or injury.
•Do not put in, wash or dry articles that have been cleaned in, washed in, soaked in, or spotted with combustible or explosive substances
global_main.book.book Page 6 Monday, May 25, 2020 9:40 AM
EN 6 SAFETY INSTRUCTIONS
(such as waxes, wax removers, oil, paint, gasoline, degreasers, drycleaning solvents, kerosene, petrol, spot removers, turpentine, vegetable oil, cooking oil, acetone, alcohol, etc.). Improper use can cause fire or explosion.
•Do not use or store flammable or combustible substances (ether, benzene, alcohol, chemical, LPG, combustible spray, insecticide, air freshener, cosmetics, etc.) near the appliance.
•Never reach into the appliance while it is operating. Wait until the drum has completely stopped.
•In case of a water leak from the appliance, disconnect the power plug and contact the LG Electronics customer information centre.
•Turn off water taps to relieve pressure on hoses and valves and to minimize leakage if a break or rupture should occur. Check the condition of the fill hoses; they may need replacement after 5 years.
•If there is a gas leakage (isobutane, propane, natural gas, etc.) within the home, do not touch the appliance or power plug and ventilate the area immediately.
•If the drain hose or inlet hose is frozen during winter, use it only after thawing.
•Keep all washing detergents, softener and bleach away from children.
•Do not touch the power plug or the appliance controls with wet hands.
•Do not bend the power cable excessively or place a heavy object on it.
•Do not put your hand, foot or anything under the appliance while the appliance is in operation.
•Avoid touching any water that is drained from the appliance during the wash.
•Make sure that drainage is working properly. If water is not drained properly, your floor may get flooded.
•If, during spinning, opening the door does not stop the drum within about 10 seconds, immediately discontinue operating the appliance and contact your dealer or LG Electronics service centre.
global_main.book.book Page 7 Monday, May 25, 2020 9:40 AM
SAFETY INSTRUCTIONS 7 EN
•Do not use a power outlet, wiring equipment and extension cord of which the electric capacity is lower than the appliance's rated capacity.
•When the air temperature is high and the water temperature is low, condensation may occur and thus wet the floor.
•Wipe off dirt or dust on the contacts of the power plug.
Maintenance
•Disconnect the appliance from the power supply before cleaning the appliance. Setting the controls to the OFF or stand by position does not disconnect this appliance from the power supply.
•Securely plug the power plug in the outlet socket after completely removing any moisture and dust.
•Do not spray water inside or outside the appliance to clean it.
•Never unplug the appliance by pulling on the power cable. Always grip the power plug firmly and pull straight out from the outlet socket.
•Only qualified service personnel from LG Electronics service centre should disassemble, repair, or modify the appliance. Contact an LG Electronics customer information centre if you move and install the appliance in a different location.
Disposal
•Before discarding an old appliance, unplug it. Cut off the cable directly behind the appliance to prevent misuse.
•Dispose of all packaging materials (such as plastic bags and styrofoam) away from children. The packaging materials can cause suffocation.
•Remove the door before disposing of or discarding this appliance to avoid the danger of children or small animals getting trapped inside.
global_main.book.book Page 8 Monday, May 25, 2020 9:40 AM
EN 8 INSTALLATION
INSTALLATION
Parts and Specifications
NOTE
• Appearance and specifications may change without notice to improve the quality of the appliance.
Front View
* This feature is only available on some models.
a Door |
k Power Cord |
b Tempered Glass |
l Hot and Cold Water Inlets |
cDetergent Dispenser Drawer
dFabric Softener Dispenser
eBleach Dispenser
fDrum
gLevelling Feet
hDrain Hose*
iControl Panel
jLint Filter*
global_main.book.book Page 9 Monday, May 25, 2020 9:40 AM
INSTALLATION 9 EN
Accessories
*1 The included accessories vary depending on the model you purchased.
aCold and Hot Water Inlet Hoses*1
bDrain Hose*1
cTie Strap*1
dAnti-Rat Cover*1
eScrew for Anti-Rat Cover
Specifications
Model |
T1066NEFVF2 |
Power Supply |
220 V~, 50 Hz |
Product Weight |
Approx. 39 kg |
Dimension(mm) |
|
|
D’ |
W |
D |
|
H’ |
|
H |
W |
590 |
D |
610 |
H |
965 |
|
|
|
|
|
|
D' |
625 |
H' |
1310 |
|
|
|
|
|
|
|
|
global_main.book.book Page 10 Monday, May 25, 2020 9:40 AM
EN 10 INSTALLATION
Installation Place Requirements
Before installing the appliance, check the following information in order to install the appliance in a correct place.
Installation Location
•Install the appliance on a flat floor of hard material that is strong enough to support a fully loaded appliance. (Allowable slope under the appliance: 1º)
•Never try to level any uneven floor by putting pieces of wood, cardboard or similar materials under the appliance.
•If it is impossible to avoid positioning the appliance next to a gas cooker or coal burning stove, an insulation (85 X 60 cm) covered with aluminium foil on the side facing the cooker or stove must be inserted between the two appliances.
•Ensure that when the appliance is installed, it is easily accessible for a service technician in the event of a breakdown.
•Additional clearance for the wall should have 10 cm for the rear and 2 cm for right and left side.
10 cm 2 cm |
2 cm |
WARNING
•This appliance must only be used for domestic household purposes and should not be used in mobile applications.
Ventilation
•Make sure that air circulation around the appliance is not impeded by carpets, rugs, etc.
Ambient Temperature
•Do not install the appliance in rooms where freezing temperatures may occur. Frozen hoses may burst under pressure. The reliability of the electronic control unit may be impaired at temperatures below freezing point.
•If the appliance is delivered in winter and temperatures are below freezing, place the appliance at room temperature for a few hours before putting it into operation.
Electrical Connection
•Do not use an extension cord or double adapter.
•Always unplug the appliance and turn off the water supply after use.
•Connect the appliance to an earthed socket in accordance with current wiring regulations.
•The appliance must be positioned so that the plug is easily accessible.
•Power outlet must be within 1.5 meters of either side of the appliance.
WARNING
•Repairs to the appliance must only be carried out by qualified personnel. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Contact your local authorised LG repairer.
•The power plug must be plugged into an appropriate outlet socket that is installed and grounded/earthed in accordance with all local codes and ordinances.
NOTE
•Do not install this appliance on a raised surface or platform, plinth or stand. It may cause injury or serious malfunctioning.
global_main.book.book Page 11 Monday, May 25, 2020 9:40 AM
INSTALLATION 11 EN
Connecting the Water Inlet Hoses
Before connecting the water inlet hose to the water tap, check the hose fitting type and then choose the correct instruction.
Connecting the Hose to the Water Tap
Connecting Screw-Type Hose to Tap with Thread
Screw the hose connector onto the water supply tap. Hand tighten only with the aid of a soft cloth.
Note for Connection
•Water supply pressure must be between 50 kPa and 800 kPa (0.5 - 8.0 kgf / cm²). If the water supply pressure is more than 800 kPa, a decompression device should be installed.
•Do not overtighten the water inlet hose to the valve.
•Periodically check the condition of the hose and replace the hose if necessary.
Checking the Rubber Seal
Two rubber seals aare supplied with the water inlet hoses. They are used to prevent water leaks. Connection to taps is sufficiently tight.
•Do not use mechanical devices such as multi grips to tighten the inlet hoses. Ensure that the curved end of the water inlet hose is connected to the appliance.
NOTE
•After connecting the water inlet hose to the water tap, turn on the water tap to flush out foreign substances (dirt, sand, sawdust, and etc.) in the water lines. Let the water drain into a bucket, and check the water temperature.
Connecting the Hose to the Appliance
Screw the water inlet hose to the water inlet valve on the back of the appliance.
•Do not connect the hose to the hot water supply for models with one water inlet. Connect to the cold water supply only.
global_main.book.book Page 12 Monday, May 25, 2020 9:40 AM
EN 12 INSTALLATION
NOTE
•After completing connection, if water leaks from the hose, repeat the same steps. Use the most conventional type of tap for the water supply. In case that the tap is square or too big, remove the guide plate before inserting the tap into the adaptor.
Installing the Drain Hose
Before connecting the drain hose, check your drain hose model and choose the correct instruction.
Installing the Drain Hose with the Elbow Bracket
The drain hose must not be placed higher than 120 cm above the floor. Water in the appliance may not drain or may drain slowly.
•Securing the drain hose correctly will protect the floor from damage due to water leakage.
| <![if ! IE]> <![endif]>FP |
<![if ! IE]> <![endif]>FP |
•If the drain hose is too long, do not force the drain hose further into the drain outlet. This will cause abnormal noise.
•When installing the drain hose to a sink, secure it tightly with the some string, cable tie, or chain.
NOTE
•The discharge height should be approximately 90 - 120 cm from the floor.
Levelling the Appliance
Checking the Level
Levelling the appliance prevents unnecessary noise and vibration. Check whether the appliance is perfectly level after installation.
•If the appliance rocks when pushing the top plate of the appliance diagonally, adjust the feet again.
Adjusting and Levelling the Feet
When the appliance is not perfectly level, turn the adjustable feet until the appliance no longer wobbles.
•Turn the adjustable feet clockwise to raise or turn the adjustable feet counterclockwise to lower from front-to-back, side-to-side and corner-to-corner.
NOTE
•Do not insert pieces of wood etc. under the feet.
•Timber or suspended type flooring will contribute to excessive vibration and unbalance. Reinforcing or bracing the timber floor may need to stop or reduce excessive noise and vibration.
global_main.book.book Page 13 Monday, May 25, 2020 9:40 AM
INSTALLATION 13 EN
•Do not install the appliance on any elevated surface or platform, as it may become unstable and cause serious injury and damage.
•If the appliance is installed on a uneven, weak or tilted floor causing excessive vibration, spin failure or UE error can occur. It must be placed on a firm and level floor to prevent spin failure.
Assembling the Anti-Rat Cover
You can insert the anti-rat cover according to the type to protect the appliance from the rat.
Flat Type
Insert the flat type of the anti-rat cover to the assembling hole from the front of the appliance.
global_main.book.book Page 14 Monday, May 25, 2020 9:40 AM
EN 14 OPERATION
OPERATION
Operation Overview
Using the Appliance
Before the first wash, select the Normal programme and add a half amount of detergent. Start the appliance without laundry.
•This will remove residue and water from the drum that may have been left during manufacturing.
1 Sort laundry and load items.
•Sort laundry by fabric type, soil level, colour and item size as needed. Open the door and load items into the appliance.
2 Add detergent, fabric softener and/or bleach.
•Add the proper amount of detergent to the detergent dispenser drawer. If desired, add bleach or fabric softener to the appropriate areas of the dispenser.
3 Turn on the appliance.
•Press the POWER button to turn on the appliance.
4 Choose the desired wash cycle.
•Press the Program button repeatedly until the desired programme is selected.
•Select the option button to adjust wash temperature, spin speed, etc. Refer to a fabric care label of your clothes for any warning or special instructions.
5 Begin cycle.
•Press the START/PAUSE button to begin the cycle.
•The appliance will agitate briefly without water to measure the weight of the laundry.
•If the START/PAUSE button is not pressed within a certain time, the appliance will shut off and all settings will be lost.
6 End of cycle.
•When the cycle is finished, a melody will sound. Immediately remove your clothing from the appliance to reduce wrinkling.
NOTE
•The Auto Restart function allows the cycle to restart by itself in case of power failure. It resumes from the stage where it stopped.
Preparing Laundry
Sort laundry for best washing results, and then prepare laundry according to the symbols on the care labels.
Sorting the Clothes
•For best washing results, sort your clothes according to a care label stating fabric type and washing temperature. Adjust the spin speed to wash them.
•Soil level (Heavy, Normal, Light): Separate clothes according to soil level. If possible, do not wash heavily soiled items with lightly soiled ones.
•Colour (White, Lights, Darks): Wash separately dark or dyed clothes from whites or light colours. Mixing dyed clothes with light clothes can result in dye transfer or discolouration of lighter clothes.
•Lint (Lint producers, Collectors): Wash separately lint producing fabrics from lint collecting fabrics. Lint producers can result in pilling and linting on the lint collectors.
global_main.book.book Page 15 Monday, May 25, 2020 9:40 AM
OPERATION 15 EN
Checking the Fabric Care Label
This will tell you about the fabric content of your clothes and how it should be washed.
Symbols on the Care Labels
Symbol |
Wash / Fabric type |
• Normal Wash
• Cotton, Mixed Fabrics
•Easy Care
•Synthetic, Mixed Fabrics
•Special Delicate Wash
• Delicates
• Hand Wash Only
• Wool, Silk
• Do not wash
NOTE
•The dashes under the symbol give you information about the type of fabric and the maximum allowance of mechanical stress.
Checking the Laundry before Loading
•Combine large and small items in a load. Load large items first. Large items should not be more than half of total load.
•Do not wash single small items. Add 1 - 2 similar items to the load to prevent an out-of-balance load.
•Make sure to empty all pockets. Items such as hair clips, lighters, pens, coins and keys can
cause irreparable damage to both your appliance and clothes.
•Wash delicates (stockings, underwired bras) in a wash net.
•Close zippers, hooks and strings to make sure that these items do not snag other clothes.
•Pre-treat dirt and stains by saturating the dirt and stains with dissolved detergent and brushing them in order to remove dirt.
CAUTION
•Do not wash or spin any item labelled or known to be water-proof or water-resistant, even if the product care label on the item permits machine washing. Failure to follow these instructions could result in severe damage to your washing load, your appliance and/or property damage as a result of abnormal load friction or vibration of the appliance.
-Examples of water-proof or water-resistant items include certain mattress pads, mattress covers, rain gear, camping gear, skiing apparel, outdoor gear and similar items.
global_main.book.book Page 16 Monday, May 25, 2020 9:40 AM
EN 16 OPERATION
Adding Detergents,
Softeners and Bleaches
Detergent Dosage
•Detergent should be selected according to fabric type, colour, soil level and washing temperature and should be used according to the detergent manufacturer’s instructions.
•Too much detergent results in excessive suds which cause poor washing.
•When you use liquid detergent, follow the guidelines provided by the detergent manufacturer.
•You can pour liquid detergent directly into the main detergent drawer if you are starting the wash cycle immediately. It is also recommended that it be added into the drum when loading the clothes.
•Do not use liquid detergent if you are using delay or pre-wash function as the liqluid may harden.
•Reduce the amount of detergent if too many suds are formed.
•Detergent usage may need to be adjusted for water temperature, water hardness, size and soil level of the laundry. For best results, avoid oversudsing.
•Refer to the label of the clothes, before choosing the detergent and water temperature.
•Use only suitable detergents for the respective type of clothing:
-General powdered detergents for all types of fabric
-Powdered detergents for delicate fabric
-Liquid detergents for all types of fabric or designated detergents only for wool
•For better washing performance and whitening, use detergent that contains general powdered bleach.
•Detergent is dispensed from the dispenser at the beginning of the cycle.
•Dilute liquid detergent with water, pour into the drum and start the cycle.
CAUTION
•Using liquid detergent without diluting, or leaving laundry for a long time after pouring diluted liquid detergent into the drum might cause the clothes to be damaged, bleached, discoloured.
NOTE
•Do not let the detergent harden. Doing so may lead to blockages, poor rinse performance or odour.
•Full load: According to manufacturer’s recommendation.
•Part load: 3/4 of the normal amount
•Minimum load: 1/2 of full load
Adding Detergents
•Add the measured amount of detergent into the detergent compartment a.
•Use more detergent if you have hard water, large items, greasy or oily soils or lower water temperature.
•Soap flakes or granulated soap powders should not be used in the appliance. When washing woollens, remember to use detergent suitable for washing woollens.
NOTE
•Use the appropriate amount of detergent. Too much detergent, bleach or softener may cause an overflow or a malfunction.
global_main.book.book Page 17 Monday, May 25, 2020 9:40 AM
OPERATION 17 EN
Adding Fabric Softeners
•Dilute fabric softener with water. Undiluted fabric softener may result in spots that look like oil stain.
•Measure and add the recommended amount of fabric softener into the compartment marked with the symbol on the top tub.
-Follow manufacturer’s direction.
-Fabric softener is automatically dispensed in the final rinse with indication beep.
-If you want extra rinse, you must add fabric softener manually when indication beep rings in the final rinse. This maximizes the fabric softener function.
•Do not overfill. The dispenser holds max 35 mL. Never add more than 35 mL. Overfilling can cause early dispensing of the fabric softener which could result in stained clothes. A cup with a pouring spout will help you avoid spelling.
•The effect of adding fabric softener may vary according to its viscosity. The sticker fabric softener makes its effect lower. For a sticky softener it is recommended that it be diluted with water, then be manually put during the time when the washer beeps several times before the final rinse. This function informing correct time dispense manually is optionally applied to some models. Please keep it in mind that fabric softener has to be diluted with water before dispensed and poured directly on clothes.
•Option washing is not designed to be used with fabric softener dispenser.
Adding Liquid Bleaches
•Before starting the appliance, pour the measured amount of bleach directly into the bleach dispenser a. Avoid splashing or overfilling.
•Mix powdered bleach with water to a liquid consistency and pour it into the bleach dispenser.
•Check clothing care label for special instructions and separate the laundry to be bleached.
•Dilute liquid chlorine bleach with water.
•Measure the recommended amount of liquid bleach carefully according to instructions on the bottle.
CAUTION
•Never pour undiluted liquid bleach directly onto laundry or into the wash basket. This may cause change of colour or damage to the laundry.
•Do not pour powdered bleach into the bleach dispenser. Powdered bleach may harden, so it will block the bleach dispenser.
NOTE
•Do not mix with detergent or bleach.
•Never pour fabric softener directly on clothes. It may stain them.
•Do not stop the washer during the first spin for timely dispensing.
global_main.book.book Page 18 Monday, May 25, 2020 9:40 AM
EN 18 OPERATION
Control Panel
Control Panel Features
Extra Function : Hold 3 seconds |
aPOWER Button
•Press this button to turn on or off the appliance.
•The appliance automatically turns off once a certain time has passed after the wash has completed.
bSTART/PAUSE Button
•Press this button to start or pause a wash cycle.
•Press this button to stop a wash cycle temporarily.
NOTE
•If the wash is not recommenced within 60 minutes when in pause, then the appliance will automatically turn off.
cProgram Button
•Programmes are available according to the laundry type.
•The lamp will light up to indicate the selected programme.
dExtra Options and Functions
•You can use the extra options and functions to customize the programmes.
eCycle Status Indicator
•The cycle status indicator is turned on before the start.
•The cycle status indicator blinks during that process, and then the indicator turns off when that process has completed.
fDisplay
•The display shows the settings, remaining estimated time, options, and status messages. When the appliance is turned on, the default settings in the display will light up.
•18:88 : When a programme is selected, the default time for that programme is displayed. The time can change as options are selected.
global_main.book.book Page 19 Monday, May 25, 2020 9:40 AM
OPERATION 19 EN
-If the display shows -:--, then the time will be displayed after the load sensing has detected the laundry size.
-The time shown is only an estimate. Several external factors (laundry size, room temperature, incoming water temperature, etc.) can affect the actual time.
•i : This icon turns on when the Child Lock function is selected to lock the controls.
•z: This icon turns on when the Delay button is pressed to set a time delay.
Programme
Wash programmes are designed for the best wash performance for different types of clothes.
•Press the Program button to select the desired programme.
•When you select a wash programme, the light for the corresponding wash programme will turn on.
Normal
Use this programme to wash normal laundry. The built-in sensor detects the weight of the laundry, calculating wash, rinse and, spin settings accordingly.
•If water or wet laundry is already in the drum before the start, the water level will be increased.
•For lightweight and bulky items, the water level may be too low. Increase the water level manually.
Wool
Use this programme to wash delicate fabrics such as lingerie and woollens. Before washing, check the care label for the washing instructions.
•This programme uses a slow spin to prevent the clothes from being damaged, so the laundry has more moisture than normal.
Duvet
Use this programme to wash a blanket or bedclothes that have the hand wash sign on the care label.
•Cashmere bedclothes, acrylic blanket, mixed spinning blanket, woollen blanket, infilling (polyester 101), and bed sheets might be damaged if they are allowed to float. It is recommended to purchase a separate laundry net to wash.
•Separate bed clothes from general clothes. It might cause laundry to be unbalanced, which results in abnormal washing.
•Spin dry might take longer to redistribute the laundry evenly if bedclothes are lumped to a side.
•Never wash an electric blanket, carpets, rugs, pet accessories, soft toys or shoes. It can cause damage to the appliance and other items in the wash.
•Put bedclothes into a laundry net and then soak and sink them in water so that they are less likely to float. If the items float during the wash or spin, it may damage the appliance and the clothes.
•Regardless of size, we recommend washing bedclothes individually. If two bedclothes with different materials are washed at the same time, it might cause a spin malfunction due to imbalance.
NOTE
•Hang or lay your delicates flat when you dry them.
•Only cold water will be used for this programme as hot water may damage laundry.
global_main.book.book Page 20 Monday, May 25, 2020 9:40 AM
EN 20 OPERATION
CAUTION
•When putting a blanket into the drum, do not load it over the maximum line a. The blanket must also be submerged in the water. Failure to do so or overloading the blanket in the appliance will result in damage to the wash load and the appliance.
Extra Clean
Use this programme to increase rinsing performance.
•This programme is recommended for underwear and baby clothes.
•If someone has sensitive skin or skin trouble, use this programme.
Silent
Use this programme to wash clothes quietly especially during late night and dawn.
•This programme has a longer washing time than the Normal programme.
•To reduce noise in spinning, this programme uses a slow spin to prevent the clothes from being damaged, so the laundry has more moisture than normal.
Pre Wash+Normal
Use this programme to pretreat immediate stain without handwash.
•It is necessary for clothes which could smell bad if they are not washed promptly.
Quick Wash
Use this programme to wash lightly soiled clothes for a short time.
NOTE
•This programme's recommended amount of laundry is under 3 kg.
Tub Clean
This is a special function to clean inside the drum of your appliance.
•To use this function, refer to the MAINTENANCE for details.
Extra Options and Functions
You can use the extra options and functions on some programmes to customize the cycle.
•The extra options and functions can be changed when the START/PAUSE button is pressed during operation depending on the selected programmes, options and functions.
Soil Level
Use this option to select the wash strength.
•3 levels are selected for Heavy, Normal and
Light.
Temp.
Use this option to change water temperature.
• 3 levels are selected for Warm, Hot and Cold.
Water Level
This appliance detects the amount of laundry automatically, then sets the water level. However, manually increasing the water level may be required and recommended to avoid linting and unbalanced errors when the load is bulky but lightweight.
global_main.book.book Page 21 Monday, May 25, 2020 9:40 AM
OPERATION 21 EN
•Press Water Level option to adjust water level.
•When you select a wash programme, the water level will be shown on the control panel.
•When water level is automatically detected, it may differ depending on the amount of laundry even though the same water level is indicated on the control panel.
NOTE
•Always keep the laundry amount to 2 kg or less and make sure to redistribute the laundry evenly.
•Select 60 minutes for cotton laundry and 120 minutes for synthetic fibre laundry for effective moisture reduction.
Wash
Adjusting the wash time setting modifies the cycle times and/or wash actions.
•Press Wash button until the desired wash time is selected.
Rinse
Use this option to change the number of rinses.
•Press Rinse button to change the number of rinses.
•When the Rinse option is selected, licon is lit.
•If selecting the maximum number of rinses, then this option is deactivated.
NOTE
•This option is only available on some programmes.
Spin
Use this option to change the spin strength. When you press the START/PAUSE button after selecting this option, the remaining time is indicated on the display.
To Use the Air Dry Function
When you select Air Dry, you can reduce the drying time by minimizing the moisture that remains within the clothes.
•Press the Spin button for 3 seconds to select and press the POWER button to deselect.
Delay
Use this function to delay ending time. The appliance will start automatically and finish after a specified time interval.
1 Press the POWER button.
2 Select a washing programme.
3 Press the Delay button to set the required delay ending time.
4 Press the START/PAUSE button.
NOTE
•This function is the time to the end of the programme, not the start. The actual running time may vary due to water temperature, wash laundry and other factors.
•Reservation can be made up to 18 hours;
-1 hour interval up to 3 - 12 hours
-2 hours interval up to 12 - 18 hours
•This function cannot be set for less than 3 hours.
•To cancel this function, press Delay button repeatedly until the reservation is cancelled or press the POWER button to turn off and on power.
Soak
This option can be selected to wash heavily soiled clothes by soaking them in water for some time to loosen dirt and grime.
global_main.book.book Page 22 Monday, May 25, 2020 9:40 AM
EN 22 OPERATION
•Press the Wash button until uand kicons turn on simultaneously.
Locking/Unlocking the Control Panel
Use Child Lock function to disable the controls. This function can prevent children from changing programmes or operating this appliance.
NOTE
•Once this function is set, all buttons are locked except the POWER button.
•When the controls are locked, CL and the remaining time are alternatively shown on the display during the wash while the child lock is engaged.
•Turning off the power will not reset this function. You must deactivate this function before you can access any other options and functions.
Locking the Control Panel
1 Turn on the power.
2 Press and hold the Temp. and Rinse buttons simultaneously for 3 seconds to activate this function.
Unlocking the Control Panel
1
2
Turn on the power.
Press and hold the Temp. and Rinse buttons simultaneously for 3 seconds to deactivate this function.
•When this function is deactivated, a beeper will sound and the remaining time for the current cycle will reappear on the display.
global_main.book.book Page 23 Monday, May 25, 2020 9:40 AM
OPERATION 23 EN
Manual Washing
When you need a rinse and spin, spin only, rinse only or wash only cycle, these can be set manually.
|
Rinse and Spin |
|
Spin only |
|
Rinse only |
Wash only |
|
|
|
|
|
|
|
1 |
|
|
s or t |
|
||
|
|
Press the POWER button. |
|
|||
|
|
|
|
|||
|
|
|
|
|
|
|
2 |
l |
|
p |
|
l |
k |
Press the Rinse |
|
Press the Spin |
|
Press the Rinse |
Press the Wash |
|
|
button. |
|
button. |
|
button. |
button. |
|
|
|
|
|
|
|
|
Rinse and spin are |
|
Press the Spin button |
|
Press the Spin |
Rinse and spin are |
3 |
automatically |
|
to adjust spin |
|
button until the spin |
automatically |
|
selected. |
|
strength. |
|
function is cancelled. |
selected. |
|
|
|
|
|
|
|
|
land p |
|
|
|
l |
land p |
|
Press the Rinse or |
|
|
|
Press the Rinse and |
|
4 |
Spin buttons to |
|
|
|
Press the Rinse |
Spin buttons until the |
adjust the number |
|
|
|
button to adjust the |
rinse and spin |
|
|
|
|
|
|||
|
of rinses or spin |
|
|
|
number of rinses. |
functions are |
|
strength. |
|
|
|
|
cancelled. |
|
|
|
|
|
|
|
5 |
|
|
|
u |
|
|
|
Press the START/PAUSE button to start the cycle(s). |
|||||
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
NOTE
•When you set a washing cycle manually such as rinse only, wash only or wash and rinse, the water will not be drained out after the wash is completed. If you wish to drain the water, select a spin only cycle after the wash has completed.
•If a rinse only cycle is selected, the water supply begins after detecting the load and the cycle will start. However the water will still fill to the selected water level even if there is water already in the tub.
•If you do not select or change the Water Level, the water level will be set automatically.
global_main.book.book Page 24 Monday, May 25, 2020 9:40 AM
EN 24 SMART FUNCTIONS
SMART FUNCTIONS
LG ThinQ Application
The LG ThinQ application allows you to communicate with the appliance using a smartphone.
LG ThinQ Application Features
Smart Diagnosis
This function provides useful information for diagnosing and solving issues with the appliance based on the pattern of use.
•Launch the LG ThinQ application and select the Smart Diagnosis feature in the menu. Follow the instructions for audible diagnosis provided in the LG ThinQ application.
1 Press the POWER button to turn on the appliance.
• Do not press any other buttons.
2 Place the mouthpiece of your smartphone close to the c or d logo.
Installing the LG ThinQ Application
Search for the LG ThinQ application from the Google Play Store or Apple App Store on a smartphone. Follow instructions to download and install the application.
Smart Diagnosis
This feature is only available on models with the c or d logo.
Use this feature to help you diagnose and solve problems with your appliance.
|
. |
|
. |
Max |
Max |
||
10 |
mm |
10 |
mm |
|
|
||
3 Press and hold the Temp. button for 3 seconds or longer while holding the smartphone mouthpiece to the logo until the data transfer is complete.
•Keep the smartphone in place until the data transfer has finished. Time remaining for data transfer is displayed.
4 After the data transfer is complete, the diagnosis will be displayed in the application.
NOTE
•For reasons not attributable to LGE’s negligence, the service may not operate due to external factors such as, but not limited to, Wi-Fi unavailability, Wi-Fi disconnection, local app store policy, or app unavailability.
•The feature may be subject to change without prior notice and may have a different form depending on where you are located.
Using Audible Diagnosis to Diagnose Issues
NOTE
•For best results, do not move the smartphone while the tones are being transmitted.
Follow the instructions below to use the audible diagnosis method.
global_main.book.book Page 25 Monday, May 25, 2020 9:40 AM
MAINTENANCE 25 EN
MAINTENANCE
WARNING
•Unplug the appliance before cleaning to avoid the risk of electric shock. Failure to follow this warning may result in serious injury, fire, electric shock, or death.
•Never use harsh chemicals, abrasive cleaners, or solvents to clean the appliance. They may damage the finish.
Cleaning after Every Wash
What to Clean
•If you always use cold water, we recommend that a warm or hot wash be used at regular intervals e.g. every 5th wash should be at least a warm one.
•Turn off taps after use to prevent the chance of flooding, otherwise an inlet hose may burst.
•Always unplug the power cord after use.
•After the cycle is finished, wipe the door and the inside of the door to remove any moisture.
•Clean around the bleach dispenser with water to flush any residual bleach from the dispenser opening as bleach can be corrosive if left undiluted.
WARNING
•Leave the door open to dry the drum interior but only if it is safe and any children are supervised.
Dispenser Drawer
Detergent may build up in the dispenser drawer. Remove the drawer and inserts from the dispenser drawer and clean any buildup once or twice a month.
Cleaning the Appliance Periodically
Tub Clean
This is a special function to help clean the inside of the appliance by soaking, washing, rinsing and spinning.
Run this function once a month (or more often if needed) to reduce build-up of detergent and softener and other residue.
•If there is a bad smell or mildew inside the appliance, run this function once a week for 3 weeks in addition to the regularly prompted intervals.
Cleaning the Exterior
Proper care of the appliance can extend the service life.
Exterior
•Immediately wipe off any spills.
•Wipe with a damp cloth and then again with a dry cloth ensuring there is no moisture in cabinet joints or crevices.
•Do not press on the surface or the display with sharp objects.
NOTE
•For models with a lint filter, remove lint or dirt from the inside of the lint filter before and after using this programme.
•For models without a lint filter, the lint is discharged when the water drains during washing.
1 Remove any clothing or items from the appliance.
global_main.book.book Page 26 Monday, May 25, 2020 9:40 AM
EN 26 MAINTENANCE
2 Open the dispenser drawer and add antilimescale to the main wash compartment.
1 Turn off the power and the water tap and then unscrew the water inlet hose.
WARNING
•Do not add any detergent to the detergent dispenser drawer for this function. Doing so may generate excessive suds and leak out from the appliance and cause damage to property.
3 Close the dispenser drawer slowly and close the door.
4 Press the POWER button.
5 Turn the knob to select Tub Clean.
6 Press the START/PAUSE button to start.
7 Leave the door open to dry the inside of the appliance completely.
•When the inside of the appliance is not dried completely, it may cause a bad smell or mildew.
WARNING
•Leave the door open to dry the drum interior but only if it is safe and any children are supervised.
Cleaning the Water Inlet Filter
Water inlet filter collects lime or any small objects that may be in water supplied to the appliance. Clean the water inlet filter regularly.
•Turn off the water taps to the appliance if the appliance is to be left for any length of time (e.g. holiday), especially if there is no floor drain (gully) in the immediate vicinity.
•IE error message will be displayed on the control panel when water is not entering the detergent drawer.
•If the water is very hard or contains traces of limescale, the filter on the water inlet may be clogged.
2 Remove the water inlet filter with small pliers and then clean the filter using a medium bristle tooth brush.
Cleaning the Lint Filter
The filter is an important part for an efficient washing performance result, so take a special care. Clean the filter regularly.
CAUTION
•Clean the lint filter after at least 2 - 3 washes.
•Do not drop the filter on the floor.
•Be careful not to get your fingernails caught in the filter when you handle the filter.
•The lint filter should be back into its original position after being washed to avoid damage to your laundry items. Do not operate the appliance with the lint filters removed.
•If the mesh hole of the lint filter is clogged, foreign objects in the laundry may not be filtered.
•Do not leave iron objects (such as clothes pins, hairpins, etc.) in the lint filter as they promote rust.
global_main.book.book Page 27 Monday, May 25, 2020 9:40 AM
MAINTENANCE 27 EN
1
2
3
4
Push down on the release tabs on both sides of the filter cover and pull forward.
Open the lid and remove the lint.
Wash the filter.
Close the lid and then insert the lower part of the filter into the wash drum. Press the top of the filter until you hear a click sound.
Cleaning the Drain Pump Filter
The drain filter collects threads and small objects left in the laundry. Check regularly that the filter is clean to ensure smooth running of the appliance.
1 Turn on the appliance.
2 Press the Spin button to empty all the water from the drum.
3 Turn off the appliance and unplug it from the power outlet socket.
4 Place a towel on the floor under the drain pump cap.
•Residual water may remain in the drain hose and the water may leak from the drain hose.
5 Turn the cap a on the rear of the appliance counter-clockwise and pull it out.
6 Remove any foreign objects and fluff inside pump casing and from the filter.
7 Insert the filter along the guide ribs inside the pump casing and turn the cap clockwise to refit the cap.
global_main.book.book Page 28 Monday, May 25, 2020 9:40 AM
EN 28 MAINTENANCE
•Securely turn the cap clockwise until it is tight.
8 Turn on the power and check for leaks before repositioning the appliance.
CAUTION
•Be careful when draining, as any residual water may be hot.
global_main.book.book Page 29 Monday, May 25, 2020 9:40 AM
TROUBLESHOOTING 29 EN
TROUBLESHOOTING
Before Calling for Service
Operation of the appliance can lead to errors and malfunctions. The following tables contain possible causes and notes for resolving an error message or malfunction. You can remedy most of the problems by yourself, consequently save time and money, since you do not need to call LG Electronics service centre. The following table should assist you by troubleshooting.
Error Messages
The appliance is equipped with an automatic error-monitoring system to detect and diagnose problems at an early stage. If this appliance does not function properly or does not function at all, check the following before you call LG Electronics service centre.
Symptoms |
Possible Cause & Solution |
|
|
dE |
The door is not closed properly. |
DOOR ERROR |
• Close the door completely. If the error code is still displayed, call for |
|
service. |
|
|
dL |
Door is not locked properly. |
DOOR LOCK ERROR |
• Check nothing is caught under the door, including shipping materials or |
|
clothing. |
|
• Close the door completely. If the error code is still displayed, call for |
|
service. |
|
|
dr |
The appliance is paused during a cycle for a few minutes. |
DRAIN FEATURE |
• The cycle will be cancelled and any water remaining in the drum will be |
|
drained. |
|
|
1E |
Water supply tap(s) are not completely open. |
INLET ERROR |
• Fully open tap. |
|
|
|
Water supply hose(s) are kinked, pinched, or crushed. |
|
• Straighten or reinstall the water supply hose(s). |
|
|
|
The filter of the supply hose(s) are clogged. |
|
• Check and clean the filter of the supply hose(s). |
|
|
|
Water supply pressure to tap or house is too low or too high. |
|
• Contact a plumber to have the water pressure checked or restored to the |
|
operating requirements. |
|
|
|
Water supply is connected with leak limiting hose(s). |
|
• Do not use leak limiting hose(s). |
|
|
global_main.book.book Page 30 Monday, May 25, 2020 9:40 AM
EN 30 TROUBLESHOOTING
Symptoms |
Possible Cause & Solution |
|
|
LE1 |
Foreign objects, such as coins, pins, clips, etc.,are caught between the |
FOREIGN OBJECTS |
pulsator and the inner drum. |
ERROR |
• Turn off the appliance and then press the POWER button. Press the Spin |
|
button without selecting a cycle to drain and spin the laundry. When the |
|
spin is complete, remove the clothes and then find and remove any objects |
|
caught in the pulsator gap. |
|
|
OE |
Drain hose is kinked, pinched, or clogged. |
WATER OUTLET ERROR |
• Clean and straighten the drain hose. |
|
|
|
Drain discharge is more than 1.2 m above the bottom of the appliance. |
|
• Adjust the hose or reconfigure the drain pipe. Maximum drain height is 1.2 |
|
m. |
|
|
UE |
Rebalancing operation is not successful. |
UNBALANCE ERROR |
• The automatic attempt to rebalance the laundry was not successful. The |
|
cycle has been paused to allow the laundry to be manually adjusted. |
|
|
|
The load is too small. |
|
• Add more items to allow the appliance to balance the laundry. |
|
|
|
Heavy items are mixed with lighter items. |
|
• Wash items of somewhat similar weight. |
|
|
|
The load is out of balance. |
|
• Manually redistribute the laundry if laundry have become tangled. |
|
|
tE |
Control error. |
TEMPERATURE SENSOR |
• Unplug the appliance and wait 60 seconds. Reconnect power and try |
ERROR |
again. |
|
• If the error code is still displayed, call for service. |
|
|
FE |
Water overfills due to the faulty water valve. |
OVERFLOW ERROR |
• Close the water taps, unplug the appliance, and call for service. |
|
|
PE |
The water level sensor is not working correctly. |
PRESSURE SENSOR |
• Close the water taps, unplug the appliance, and call for service. |
ERROR |
|
|
|
LE |
A motor error has occurred. |
MOTOR LOCKED ERROR |
• Allow the appliance to stand for 30 minutes and then restart the cycle. |
|
• If the error code is still displayed, call for service. |
|
|
AE |
Clutch error. |
CLUTCH ERROR |
• Unplug the appliance and call for service. |
|
|
Loading...