LG SN05LPBX, SN09LPBX, SN07LV-1, SN18LPB Manual book

OWNER’S MANUAL

AIR CONDITIONER

Please read this manual carefully before operating your set and retain it for future reference.

P/NO : MFL66102305

www.lge.com

TYPE : WALL MOUNTED

MODELS :

S05LPBX

S07LPB

S07LV-1

S09LVX

S09LPBX

S18LPB

E N

G L SI

DNI O N

SE AI

S05LVX

2 Room Air Conditioner

Room Air Conditioner Owner’s Manual

TABLE OF CONTENTS

FOR YOUR RECORDS

Write the model and serial numbers here:

Model #

Serial #

You can find them on a label on the side of each unit.

Dealer's Name

Date Purchased

Staple your receipt to this page in the event you need it to prove date of purchase or for warranty issues.

READ THIS MANUAL

Inside you will find many helpful hints on how to use and

maintain your air conditioner properly. Just a little

preventive

care on your part can save you a great deal

of time and money over the life of your air conditioner.

You'll

find many answers to common problems in the

chart of troubleshooting tips. If you review our chart of

Troubleshooting

Tips first, you may not need to call

for service at all.

PRECAUTION

• Contact the authorized service technician for

repair or maintenance of this unit.

• Contact the installer for installation of this unit.

• The ai r condi tione r is no t intended for use by young children or invalids without supervision.

• Young children should be supervised to ensure that they do not play with the air conditioner.

• Wh e n th e po w er c ord is to be re p l ace d , re p l ace m e nt

wo r k sh a ll be per f o rme d by

aut horized

perso nnel only us ing only genu ine

replacement parts.

• In s t all a t ion w o r k must b e p erf o r m ed in accordance

with the Na tio nal El ect ric Code by

qualified and authorized personnel only.

Safety Precautions.........................3

Prior to Operation ..........................9

Introduction ..................................10

Electrical Safety ...........................11

Operating Instructions.................13

Maintenance and Service ............26

Owner's Manual 3

Safety Precautions

HSI

GNE

Safety Precautions

To prevent the injury of the user or other people and property damage, the following instructions must be followed.

Incorrect operation due to ignoring instruction will cause harm or damage. The seriousness is classified by the following indications.

This symbol indicates the possibility of death or serious injury.

This symbol indicates the possibility of injury or damage to properties only.

The meanings of the symbols used in this manual are as shown below.

Be sure not to do.

Be sure to follow the instruction.

Installation

Do not use damaged power cords, plugs, or a loose socket.

• There is risk of fire or electric shock.

For electrical work, contact the dealer, seller, a qualified electrician, or an Authorized Service Center.

• There is risk of fire or electric shock.

Always use the power plug and socket with the ground terminal.

• There is risk of electric shock.

Install the panel and the cover of control box securely.

• There is risk of fire or electric shock.

Do not modify or extend the power cord.

• There is risk of fire or electric shock.

Do not install, remove, or re-install the unit by yourself (customer).

• There is risk of fire, electric shock, explosion, or injury.

4 Room Air Conditioner

Safety Precautions

Be cautious when unpacking and installing the product.

• Sharp edges could cause injury. Be especially careful of the case edges and the fins on the condenser and evaporator.

For installation, always contact the dealer or an Authorized Service Center.

• There is risk of fire, electric shock, explosion, or injury.

Do not install the product on a defective installation stand.

• It may cause injury, accident, or damage to the product.

Be sure the installation area does not deteriorate with age.

•

If the base collapses, the air conditioner could fall with it, causing property damage, product failure, and personal injury.

Do not let the air conditioner run for a long time when the humidity is very high and a door or a window is left open.

• Moisture may condense and wet or damage furnishings.

Take care to ensure that power cords could not be pulled out or damaged during operation.

• There is risk of fire or electrical shock.

Do not place anything on the power cord.

• There is risk of fire or electric shock.

Do not turn the air-conditioner ON or OFF by plugging or unplugging the power plug.

• There is risk of fire or electrical shock.

Operation

Owner's Manual 5

Safety Precautions

Use a dedicated outlet for this appliance.

• There is risk of fire or electrical shock.

Grasp the plug to remove the cord from the outlet. Do not touch it with wet hands.

• There is risk of fire or electrical shock.

Do not place a heater or other appliances near the power cable.

• There is risk of fire and electric shock.

Do not allow water to run into electric parts.

• It may cause There is risk of fire, failure of the product, or electric shock.

Do not store or use flammable gas or combustibles near the air conditioner.

• There is risk of fire or failure of product.

Do not use the product in a tightly closed space for a long time.

• Oxygen deficiency could occur.

When flammable gas leaks, turn off the gas and open a window for ventilation before turn the product on. DO NOT use the telephone or turn switches on or off.

• There is risk of explosion or fire.

Unplug the unit if strange sounds, odors, or smoke comes from it.

• There is risk of electrical shock or fire

Stop operation and close the window in storm or hurricane. If possible, remove the air conditioner from the window before the hurricane arrives.

• There is risk of property damage, failure of product, or electric shock.

ENGLISH

Thinner

6 Room Air Conditioner

Safety Precautions

Always check for gas (refrigerant) leakage after installation or repair of product.

• Low refrigerant levels may cause failure of product.

Install the drain hose to ensure that water is drained away properly.

• A bad connection may cause water leakage.

Keep level even when installing the product.

• To avoid vibration or water leakage.

Installation

Unplug the appliance before performing cleaning or maintenance.

• There is risk of electrical shock.

When the product is not be used for a long time, disconnect the power supply plug or turn off the breaker.

• There is risk of product damage or failure, or unintended operation.

Take care to ensure that nobody could step on or fall onto the outdoor unit.

• This could result in personal injury and product damage.

Do not open the inlet grill of the product during operation. (Do not touch the electrostatic filter, if the unit is so equipped.)

• There is risk of physical injury, electric shock, or product failure.

When the product is soaked (flooded or submerged), contact an Authorized Service Center.

• There is risk of fire or eletric shock.

Ventilate the product from time to time when operating it together with a stove, etc.

• There is risk of fire or electrical shock.

90˚

Owner's Manual 7

Safety Precautions

Do not install the product where the noise or hot air from the outdoor unit could damage the neighborhoods.

• It may cause a problem for your neighbors.

Use two or more people to lift and transport the air conditioner.

• Avoid personal injury.

Do not install the product where it will be exposed to sea wind (salt spray) directly.

•

It may cause corrosion on the product. Corrosion, particularly on the condenser and evaporator fins, could cause product malfunction or inefficient operation.

Do not direct airflow at room occupants. (Don't sit in the draft.)

• This could damage your health.

Do not use the product for special purposes, such as preserving foods, works of art, etc. It is a consumer air conditioner, not a precision refrigeration system.

• There is risk of damage or loss of property.

Do not block the inlet or outlet of air flow.

• It may cause product failure.

Use a soft cloth to clean. Do not use harsh detergents, solvents, etc.

• There is risk of fire, electric shock, or damage to the plastic parts of the product.

Do not touch the metal parts of the product when removing the air filter. They are very sharp!

• There is risk of personal injury.

Do not step on or put anyting on the product. (outdoor units)

• There is risk of personal injury and failure of product.

Operation

ENGLISH

8 Room Air Conditioner

Safety Precautions

Do not recharge or disassemble the batteries. Do not dispose of batteries in a fire.

• They may burn or explode.

If the liquid from the batteries gets onto your skin or clothes, wash it well with clean water. Do not use the remote if the batteries have leaked.

• The chemicals in batteries could cause burns or other health hazards.

Always insert the filter securely. Clean the filter every two weeks or more often if necessary.

• A dirty filter reduces the efficiency of the air conditioner and could cause product malfunction or damage.

Do not insert hands or other objects through the air inlet or outlet while the air conditioner is plugged in.

• There are sharp and moving parts that could cause personal injury.

Do not drink the water drained from the unit.

• It is not sanitary and could cause serious health issues.

Disuse

Use a firm stool or ladder when cleaning or maintaining the air conditioner.

• Be careful and avoid personal injury.

Replace the all batteries in the remote control with new ones of the same type. Do not mix old and new batteries or different types of batteries.

• There is risk of fire or explosion

Owner's Manual 9

Prior to Operation

1. Contact an installation specialist for installation.

2. Plug in the power plug properly.

3. Use a dedicated circuit.

4. Do not use an extension cord.

5. Do not start/stop operation by plugging/unplugging the power cord.

If the cord/plug is damaged, replace it with only an authorized replacement part.

Being exposed to direct airflow for a long time may be hazardous to your health. Do not expose

occupants, pets, or plants to direct airflow for a long time.

Due to the possibility of oxygen deficiency, ventilate the room when using the appliance together with

stoves or other heating devices.

Do not use this air conditioner for non-specified special purpose (e.g. preserving precision devices,

food, pets, plants, or art objects). Such use may damage your properties.

Do not touch the metal parts of the unit when removing the filter. Injury can occur.

Do not use water to clean inside the air conditioner. Exposure to water can destroy the insulation,

leading to electric shock.

When cleaning the unit, first make sure that the power and breaker are turned off. The fan rotates at a

very high speed during operation. There is a possibility of injury if the unit

’s power is triggered while

cleaning inner parts of the unit.

For repair and maintenance, contact your authorized service dealer.

Preparing for Operation

Usage

Cleaning and Maintenance

Service

ENGLISH

Air Intake Vents

Air Outlet Vents

Air Intake Vents

Air Outlet Vents

Connecting Wires

Piping

Drain Hose

Base Plate

Front Panel

Air Inlet

Signal Receptor

Air Filter

Introduction

Symbols used in this Manual

This symbol alerts you to the risk of electric shock.

This symbol alerts you to hazards that may cause harm to the air conditioner.

NOTICE

Features

This appliance should be installed in accordance with national wiring regulations. This guide acts as a guide to help to explain product features.

INDOOR

OUTDOOR

This symbol indicates special notes.

10 Room Air Conditioner

Electrical Safety

WARNING: This appliance must be properly grounded.

To minimize the risk of electric shock, you must alway plug into a grounded oulet.

WARNING: Do not cut or remove the grounding prong from the power plug.

WARNING: Attaching the adapter ground terminal to the wall receptacle cover screw does not ground the appliance unless the cover screw is metal and not insulated, and the wall receptacle is grounded through the house wiring.

WARNING: If you have any doubt whether the air conditioner is properly grounded, have the wall receptacle and circuit checked by a qualified electrician.

Preferred method

Ensure proper ground

exists before use

Safety Precautions

ENGLISH

Owner's Manual 11

Introduction

Temporary Use of an Adapter

We strongly discourage the use of an adapter due to potential safety hazards. For temporary connections, use only a UL-listed adapter, available from most local hardware stores. Ensure that the large slot in the adapter is aligned with the large slot in the receptacle for a proper polarity connection.

To disconnect the power cord from the adapter, use one hand on each to avoid damaging the ground terminal. Avoid frequently unplugging the power cord as this can lead to eventual ground terminal damage.

WARNING: Never use the appliance with a broken adapter.

We strongly discourage the use of an extension cord due to potential safety hazards. For temporary situations, use only CSA certified and UL listed 3-wire grounded extension cords, rated 15 A, 125 V.

Temporary Use of an Extension Cord

Temporary method

Adapter Plug

Receptacle Cover

Metal Screw

12 Room Air Conditioner

Introduction

OFF

CANCEL

AUTO CLEAN

SET

14 16

Cooling Operation

Auto Operation or Auto Changeover

Healthy Dehumidification Operation

Flip-up door (opened)

Heating Operation

Signal transmitter

•

Cooling Model( ), Heat Pump Model( )

Operation Mode

Controls

The controls will look like the following.

Remote Control Operations

1. START/STOP BUTTON

Operation starts when this button is pressed and stops when the button is pressed again.

2. OPERATION MODE SELECTION BUTTON

Used to select the operation mode.

3. ROOM TEMPERATURE SETTING BUTTONS

Used to select the room temperature.

4. INDOOR FAN SPEED SELECTOR

Used to select fan speed in four steps low, medium, high and CHAOS.

JET COOL

Used to start or stop the speed cooling.(speed cooling operates super high fan speed in cooling mode.)

6. CHAOS SWING BUTTON

Used to stop or start louver movement and set the desired up/down airflow direction.

7. ON/OFF TIMER BUTTONS

Used to set the time of starting and stopping operation. (See page 23)

8. TIME SETTING BUTTONS

Used to adjust the time. (See page 23)

9. TIMER SET/CANCEL BUTTON

Used to set the timer when the desired time is obtained and to cancel the Timer operation. (See page 23)

10. SLEEP MODE AUTO BUTTON

Used to set Sleep Mode Auto operation. (See page 23)

11. AIR CIRCULATION BUTTON

Used to circulate the room air without cooling or heating. (See page 24)

12. ROOM TEMPERATURE CHECKING

BUTTON

Used to check the room temperature.

13. NEO PLASMA(OPTIONAL)

Used to start or stop the plasma-purification function. (See page 21)

14. HORIZONTAL AIRFLOW DIRECTION

CONTROL BUTTON (OPTIONAL)

Used to set the desired horizontal airflow direction.

15. RESET BUTTON

Used prior to resetting time.

16. 2nd F Button

Used prior to using modes printed in blue at the bottom of buttons. (See page 22)

17. AUTO CLEAN (OPTIONAL)

Used to set Auto Clean mode.

14 Room Air Conditioner

Cooling

Healthy

Dehumidification

Auto

Changeover

Heating

(Heat pump model only)

To lower the temperature

To raise the temperature

Press the Start/Stop button. The unit will respond with a beep.

Open the door of the remote controller. To select Cooling Operation, press the Operation Mode Selection button. Each time the button is pressed, the operation mode is shifted in the direction of the arrow.

the door of the remote controller. Set the temperature

lower

than the room temperature. The temperature can be

set within a range of 18

°C~30°C at intervals of 1°C.

Set the fan speed again with the door of the remote controller still closed. You can select the fan speed in four steps-low, medium, high and CHAOS. Each time the button is pressed, the fan speed mode is shifted.

Natural wind by the CHAOS logic

For fresher feeling, press the Indoor fan speed selector and set to CHAOS mode. In this mode, the wind blows like a natural breeze by automatically changing fan speed according to the CHAOS logic.

Cooling operation

Safety Precautions

ENGLISH

Owner's Manual 15

Cooling

Healthy

Dehumidification

Auto

Heating

(Heat pump model only)

To lower the temperature

To raise the temperature

Press the Start/Stop button. The unit will respond with a beep.

Open the door of the remote controller. To select Auto Operation, press the operation mode selection button. Each time the button is pressed, the operation mode is shifted in the direction of the arrow.

The

temperature and fan speed are automatically set by the

electronic

controls based on the actual room temperature. If

you

want to change the set temperature, press the Room

Temperature

Setting buttons. The cooler or warmer you feel,

the

more times (up to two times) you should press the button.

The set temperature will be changed automatically.

During Auto Operation

You cannot control the indoor fan speed. It has already been set by the Fuzzy rule. If the system is not operating as desired, manually switch to another mode. The system will not

automatically

switch from the cooling mode to the heating mode, or from heating mode to cooling

mode, it must be done by manually resetting. During Auto Operation, pressing the chaos swing button makes the horizontal louvers swing up and

down automatically. If you want to stop auto-swing, press the chaos swing button again.

Auto operation (Optional)

Introduction

16 Room Air Conditioner

Cooling

Healthy

Dehumidification

Auto

Changeover

Heating

(Heat pump model only)

To lower the temperature

To raise the temperature

Auto changeover operation(Optional)

Press the Start/Stop button. The unit will respond with a beep.

Open the door of the remote controller. To select Auto Changeover Operation, press the Operation Mode Selection button. Each time the button is pressed, the operation mode is shifted in the direction of the arrow.

Close the door of the remote controller. Set the temperature lower

than the room temperature. The temperature can be

set within a range of 18

°C~30°C at intervals of 1°C.

During Auto changeover Operation

The air conditioner changes the operation mode automatically to keep indoor temperature. When room temperature

vary over ±2°C with respect to setting temperature, air conditioner keeps the room

temperature within ±2

°C with respect to setting temperature by auto changeover mode.

Safety Precautions

ENGLISH

Owner's Manual 17

Cooling

Healthy

Dehumidification

Heating

(Heat pump model only)

Auto

Changeover

Press the Start/Stop button. The unit will respond with a beep.

Open the door of the remote controller. To select Healthy Dehumidification Operation, press the Operation Mode Selection button. Each time the button is pressed, the operation mode is shifted in the direction of the arrow.

Set the fan speed again with the door of

the remote controller still closed.

You

can select the fan speed in four

steps-low,

medium, high, or CHAOS.

Each

time the button is pressed, the

fan speed mode is shifted.

Natural wind by the CHAOS logic

For fresher feeling, press the Indoor Fan Speed Selector and set to CHAOS mode. In this mode, the wind blows like a natural

breeze

by automatically changing fan speed according to the

CHAOS logic.

Healthy dehumidification operation

During Healthy Dehumidification Operation

If you select the dehumidification mode on the operation selection button, the product starts to run the dehumidification function. It automatically sets the room temp. and airflow volume to the best condition for dehumidification, based on the sensed current room temp.

In this case, however, the setting temp. is not displayed on the remote controller and you are not able to control the room temp. either.

During the healthy dehumidification function, the airflow volume is automatically set according to the optimization

algorithm responding to the current room temp. status, so that the room condition is kept

healthy and comfortable even in the very humid season.

Introduction

18 Room Air Conditioner

Cooling

Healthy

Dehumidification

Heating

(Heat pump model only)

To lower the temperature

To raise the temperature

Auto

Changeover

Heating operation (Heat pump model only)

Press the Start/Stop button. The unit will respond with a beep.

Open the door of the remote controller. To select Heating Operation, press the Operation Mode Selection button. Each time the button is pressed, the operation mode is shifted in the direction of the arrow.

Close the door of the remote controller. Set the temperature higher than the room temperature. The temperature can be set within a range of 16

°C~30°C at

intervals of 1

°C.

Set

the fan speed again with the door of the

re mot e

control ler still clos ed. You can

lect the fan speed i n four steps–low,

medium,

high and CHAOS. Each time the

button

is pressed, the fan speed mode is

shifted.

Natural wind by the CHAOS logic

For fresher feeling, press the Indoor Fan Speed Selector and set to CHAOS mode. In this mode, the wind blows like a natural breeze by automatically changing fan speed according to the CHAOS logic.

Safety Precautions

ENGLISH

Owner's Manual 19

+ 43 hidden pages