<![endif]>HISGLNE
OWNER’S MANUAL
AIR CONDITIONER
Please read this manual carefully before operating your set and retain it for future reference.
TYPE : WALL MOUNTED
Skincare
MODELS :
S05DLG-2 S07DLG-2 S09DLG-2
*MFL67658910*
P/NO : MFL67658910 |
www.lg.com |
<![endif]>ENGLISH
2 |
TIPS FOR SAVING ENERGY |
|
|
|
TIPS FOR SAVING ENERGY
Here are some tips that will help you minimize the power consumption when you use the air
below:
•Do not cool excessively indoors. This may be harmful for your health and may consume more electricity.
•Block sunlight with blinds or curtains while you are operating the air conditioner.
•Keep doors or windows closed tightly while you are operating the air conditioner.
y to circulate indoor air.
•Speed up the fan to cool or warm indoor air quickly, in a short period of time.
•Open windows regularly for ventilation as the indoor air quality may deteriorate if the air conditioner is used for many hours.
impurities collected in the
ng / dehumidifying functions.
For your records
Staple your receipt to this page in case you need it to prove the date of purchase or for warranty purposes. Write the model number and the serial number here:
Model number :
Serial number :
Dealer’s name :
Date of purchase :
IMPORTANT SAFETY INSTRUCTIONS |
3 |
|
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.
Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product
! WARNING
It can result in serious injury or death when the directions are ignored
! CAUTION
It can result in minor injury or product damage when the directions are ignored
! WARNING
in hazards to you and others.
•Air conditioner Shall be installed in accordance with national wiring regulations.
•If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
•The information contained in the manual is intended for use b
familiar with safety procedures and equipped with the proper tools and test instruments.
•Failure to carefully read and follow all instructions in this manual can result in equipment malfunction, property damage, personal injury and/or death.
•This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
•Children should be supervised to ensure that they do not play with the appliance.
•When the power cord is to be replaced, replacement work shall ve performed by authorized personnel only using only genuine replacement parts.
Installation
•Use a standard circuit breaker and fuse conforming with the rating of the air conditioner. Failure to do so may result in electric shock or product failure.
•Contact an authorized service center when you install or relocate the air conditioner. Failure to do so may result in serious injury or product failure.
•Always use a power plug and socket with a ground terminal. Failure to do so may result in electric shock or product failure
•Install the panel and the cover of the control box safely. Failure to do so may result in explo-
•Install a dedicated electric outlet and circuit breaker before you use the air conditioner. Failure to do so may result in electric shock or product failure.
•Use a standard circuit breaker and fuse conforming with the rating of the air conditioner. Failure to do so may result in electric shock or product failure.
•Do not modify or extend the power cable. If the power cable or cord has scratches or skin peeled o or deteriorated then it must be replaced. It may resu
•Be cautious when you unpack or install the air conditioner. Failure to do so may result in serious injury or product failure.
•Contact an authorized service center when you install or relocate the air conditioner. Failure to do so may result in serious injury or product failure.
<![endif]>ENGLISH
|
4 |
IMPORTANT SAFETY INSTRUCTIONS |
||
<![if ! IE]> <![endif]>ENGLISH |
||||
|
|
|||
|
falling. It may result in death, serious injury, or product failure. |
|||
|
|
• Do not install the air conditioner on an unstable surface or where there may be a danger of it |
||
|
|
|
|
Operation
•Do not let the air conditioner run for a long time when the humidity is very high or when a door or window has been left open. Failure to do so may result in product failure.
•Make sure that the power cord is not pulled or damaged while the air conditioner is operating. Fail-
ure.
•Do not place any objects on the power cord. It may result in electric shock or product failure.
•Do not turn on or o the air conditioner by plugging in or unplugging the power plug. It may result in
•Do not touch, operate or repair the air conditioner with wet hands. It may result in electric shock or product failure.
•Do not place a heater or other heating appliances near the po
shock, or product failure.
• Do not allow water to run into the air conditioner. It may re
d thinner near the air conditioner.
•Do not use the air conditioner for an extended period of time in a small place without ventilation. Ventilate the place regularly. Failure to do so may result in e
•When there is a gas leak, ventilate su ciently before using the air conditioner again. Failure to do so
•Unplug the power plug if there is a noise, smell or smoke coming from the air conditioner. Failure to
•Stop operating and close the window in strom or hurricane. If possible remove the product from the window before hurricane arrives
grille. Failure to do so may result in elec-
tric shock or product failure.
•Contact an authorized service center when the air conditioner
•Be cautious water could not enter the product.
•Make sure to ventilate su ciently when this air conditioner and a heating appliance such as a heater
rious injury, or product failure.
•Turn the main power o and unplug the power plug when you clean or repair the air conditioner. Failure to do so may result in death, serious injury, or product failure.
•Unplug the power plug when the air conditioner is not used for an extended period of time. Failure to do so may result in product failure.
•Do not place any objects on the air conditioner. It may result in product failure.
!WARNING
•For inner cleaning, contact an Authorized Service Center or a dealer. Do not use harsh detergent
that causes corrosion or damage on the unit. Harsh detergent ma or electronic shock.
IMPORTANT SAFETY INSTRUCTIONS |
5 |
|
! CAUTION
Installation
•Make sure to check if there is a refrigerant leak after you install or repair the air conditioner. Failure to do so may result in product failure.
•Install the drain hose properly for smooth drainage of condensed water. Failure to do so may result in product failure.
•Keep level even when installing the product.
•Install the air conditioner where the noise from the outdoor unit or the exhaust gas will not incon-
between neighbors.
•When transporting the equipment, there should be at least 2 or more people, or a forklift. It may result in serious injury.
•Do not install the air conditioner where it will be exposed to sea wind (salt spray) directly. It may result in product failure.
Operation
•Do not expose people, animals or plants to the cold or hot wind from the air conditioner. It may result in serious injury.
•Do not use the product for special purposes, such as preserving foods, works of art, etc. It is a con-
sumer air conditioner, not a precision refrigeration system. It shock.
explosion or product failure.
•Do not use strong cleaning agents or solvents when you clean the air conditioner, or spray water. Use a smooth cloth. It may result in serious injury or product failure.
•Never touch the metal parts of the air conditioner when you r
rious injury or product failure.
• Do not place any objects on the air conditioner. It may result in product failure.
ter every two weeks or more often if
necessary.
•Do not insert hands or other objects through the air inlet or outlet while the air conditioner is operating. It may result in electric shock.
•Do not drink the water drained from the air conditioner. It may result in serious health complications.
•Use a sturdy stool or ladder when you clean, maintain or repair the air conditioner at a height. Failure to do so may result in serious injury or product failure.
•Do not mix the batteries for the remote control with other types of batteries or mix new batteries with used batteries. Failure to do so may result in product failure.
•Do not recharge or disassemble the batteries. Failure to do s
injury.
. If your cloth or skin is exposed to the
to do so may result in serious injury.
ide of your mouth thoroughly and then consult a doctor. Failure to do so may result in serious health complications.
<![endif]>ENGLISH
<![endif]>ENGLISH
6 |
TABLE OF CONTENTS |
|
|
|
TABLE OF CONTENTS
2TIPS FOR SAVING ENERGY
3IMPORTANT SAFETY INSTRUCTIONS
7 BEFORE USE
7Components
8Using the remote control
9- Inserting batteries
12 ADVANCED FUNCTIONS
12Changing room temperature quickly
13Indoor air purification
13- Auto Clean operation
13Skin Care operation
13Plasma Purification operation
14Auto operation
14Energy saving cooling mode
14Display screen brightness
14°C / °F conversion
15Operating the air conditioner without the remote control
9 |
- Installing the remote control holder |
15 |
Restarting the air conditioner automat- |
|
|
ically
10 BASIC FUNCTIONS
10Cooling your room
10Removing humidity
10Airing your room
10Adjusting the fan speed
11Adjusting the air flow direction
11Setting the timer
11- Setting the current time
11 |
- Turning on the air conditioner |
|
|
automatically at a set time |
|
11 |
- T |
to- |
|
matically at a set time |
|
12 |
- Canceling the timer setting |
|
12 |
- Setting sleep mode |
|
16 MAINTENANCE
17
17 Cleaning the triple lter(Optional)
18 TROUBLESHOOTING
18 Self-diagnosis function
18 Before requesting service
|
|
BEFORE USE |
7 |
|
|
|
|
BEFORE USE |
|
|
|
Components |
|
Air inlet |
|
|
|
|
|
Indoor unit |
Dual Protection Filter |
ON/OFF button |
|
|
|
||
Fron |
|
|
|
|
|
Skincare Ionizer |
|
Operation lampSignal Receiver
Air outlet |
Horizontal vane |
|
Vertical louver |
* The feature can be changed according a type of model.
! NOTE
The number of operation lamps and their locations may vary, depending on the model of the air conditioner.
Outdoor unit
Air inlet vents
Air outlet vents
Coolant piping Drain hose
Connection wire
Base plate
* The feature can be changed according a type of model.
<![endif]>ENGLISH
<![endif]>ENGLISH
8 |
BEFORE USE |
|
|
|
Using the remote control
buttons for the additional functions under the cover of the remote control.
Wireless remote control |
|
|
|
|
|
Control |
Display |
|
Description |
|
|
panel |
screen |
|
|
||
|
|
|
|
||
|
|
Plasma button* : |
|
|
|
|
|
moving particles that enter the indoor |
|||
|
|
unit. |
|
|
|
Display |
|
Energy saving button : Operates |
|
||
|
energy saving cooling |
|
|||
screen |
|
|
|||
|
|
|
|
|
|
|
- |
Skin Care button : keeps skin moisturized. |
|||
|
- |
On/Off button: |
|
|
|
|
|
Temperature adjustment buttons: |
|||
|
|
Adjusts the room temperature when |
|||
|
|
cooling. |
|
|
|
Control |
|
Operation mode selection button* : Se- |
|||
panel |
|
lects the operation mode. |
|
||
|
Cooling operation ( |
) / |
|
||
|
|
|
|||
|
|
Auto operation ( |
) / Dehumidifying |
||
|
|
operation ( |
) /Air circulation( |
) |
|
|
|
J et cooling button |
: Cools down the |
||
|
|
indoor temperature within a short period |
|||
|
|
of time. |
|
|
|
|
|
Indoor fan speed button: Adjusts the |
|||
|
|
fan speed. |
|
|
|
A/CLEAN |
|
Air flow direction button: Adjusts the air |
|||
|
|
|
horizontally. |
|
|
|
- |
Light button : Adjusts the brightness |
|||
|
of the indoor unit display |
|
|||
|
|
|
|||
|
|
Temperature display button: Displays |
|||
|
|
the room temperature and also changes |
|||
|
|
unit from oC to oF if pressed for 5 seconds. |
S leep mode auto button : Sets the
hr sleep mode auto operation.
Timer button: Sets the current time and the start / end time.
Auto clean button : Remove moisture
and clean inside of the indoor unit when
A/CLEAN
- |
S et/clear button: Sets or cancels func- |
|
tions. |
||
|
||
- |
R eset button: Initialize the air condi- |
|
tioner settings. |
||
|
*Some functions may not be supported, depending on the model.
|
BEFORE USE |
9 |
|
Inserting batteries |
2 Fix the holder by fastening the 2 screws |
||
|
Insert batteries before using the remote control. The battery type used is AAA (1.5 V).
1 Remove the battery cover.
2Insert the new batteries and make sure that the + and - terminals of the batteries are installed correctly.
3 Reattach the battery cover.
! NOTE
If the display screen of the remote control starts to fade, replace the batteries.
Installing the remote control holder
Install the holder where there is no direct sunlight to protect the remote control.
1 Choose a safe and easily-accessible place.
3 Slide the remote control into the holder.
Operating method
Point the remote control towards the signal receiver at the bottom of the air conditioner to operate it.
!NOTE
•The remote control may operate other electronic devices if pointed towards them. Make sure to point the remote control towards the signal receiver of the air conditioner.
•For proper operation, use a soft cloth to clean the signal transmitter and receiver.
<![endif]>ENGLISH
<![endif]>ENGLISH
10 BASIC FUNCTIONS
BASIC FUNCTIONS
Cooling your room
(Cool ing operation)
1Press to turn on the power.
2Press repeatedly to select the cooling
operation.
- is displayed on the display screen.
3Press or to set the desired temperature.
-The temperature range is 18°C (64°F) ~ 30°C (86°F).
Removing humidity
(Dehumidifying operation)
This mode removes excess moisture from an environment with high humidity or in the rainy season, in order to prevent mold from setting in. This mode adjusts the room temperature and the fan speed automatically to maintain the optimal level of humidity.
1Press to turn on the power.
2Press repeatedly to select the dehumidifying operation.
- is displayed on the display screen.
Airing your room
(Air Circulation operation)
This mode only circulates the indoor air without changing the room temperature.
1Press to turn on the power.
2Press repeatedly to select the air circulation operation.
- is displayed on the display screen.
3 Press to adjust the fan speed.
Adjusting the fan speed
1Press repeatedly to adjust the fan speed.
-Select if you want natural air. The fan speed adjusts automatically.
Remark |
Speed |
High
Medium
Low
Natural Wind
!NOTE
•In this mode you cannot adjust the desired temperature, as it is adjusted automatically. Also, the desired temperature is
not displayed on the display screen.
BASIC FUNCTIONS |
11 |
|
Adjusting the air flow direction
1
zontally, press repeatedly and select the desired direction.
-Select to adjust the direction of the air
!NOTE
2 |
Press |
or |
to select the minutes. |
3 |
Press |
|
|
Turning on the air conditioner automatically at a set time
1 Press .
the display screen.
vertically may not be supported, depending on the model.
cause product failure.
•If you restart the air conditioner, it starts to operate with the previously set direc-
not match the icon displayed on the re- mote control. When this occurs, press
again.
2Press or to select the minutes.
3Press
4When setting the timer, current time and ON icon are displayed on the display screen indicating that the desired time is set.
Setting the timer
You can use the timer function to save energy
Setting the current time
1Press and hold it for longer than 3 seconds.
the display screen.
Ttomatically at a set time
1 Press .
the display screen.
2 Press or to select the minutes.
3Press
4When setting the timer, current time and OFF icon are displayed on the display screen indicating that the desired time is set.
<![endif]>ENGLISH
<![endif]>ENGLISH
12 ADVANCED FUNCTIONS
Canceling the timer setting |
ADVANCED FUNCTIONS |
|
|
1 Press . |
|
- To cancel all timer settings, press . |
|
|
vanced functions. |
Setting sleep mode
tioner automatically when you go to sleep.
1Press to turn on the power.
2Press
3Press or to select the hour (up to 7 hours).
4Press
- is displayed on the display screen in sleep mode.
Changing room temperature quickly
(Jet Cool operation)
This mode allows you to cool indoor air quickly in summer .
1Press to turn on the power.
2Press .
-In jet cooling mode, strong air blows out at a temperature of 18°C (64°F) for 30 minutes.
! NOTE
In the Cooling and Dehumidifying modes, the temperature increases by 1°C after 30 minutes and by a further 1°C after another 30 minutes for a more comfortable sleep. The temperature increases with up to 2°C from the preset temperature.
!NOTE
•Powerful Cooling
-C/O Model
Enable in Cooling/Dehumidifying/Fan/
•This function may not be supported, depending on the model.