<![endif]>ESPAÑOL ENGLISH
OWNER’S MANUAL
STYLER
Read this owner’s manual thoroughly before operating the appliance and keep it handy for reference at all times.
S3*F**
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
MFL66101258 |
|
|
|
|
www.lg.com |
|||||||||||||||||||
|
Rev00_020119 |
|
|
|
Copyright © 2019 LG Electronics Inc. All Rights Reserved. |
MFL66101258_EN.indd 1 |
2019. 2. 11. 10:55 |
2 TABLE OF CONTENTS
TABLE OF CONTENTS
3 |
PRODUCT FEATURES |
|
25 |
Loading the Styler |
|
|
Hangers |
||||
4 |
IMPORTANT SAFETY INSTRUCTIONS |
|
|||
|
Using the Moving Hanger |
||||
4 |
Safety Instructions for Installation |
|
|
Pants Hanger or Pants Crease Care |
|
5 |
Safety Instructions for Connecting Electricity |
|
Shelf |
||
6 |
Basic Safety Precautions |
29 |
Control Panel |
||
7 |
Grounding Instructions |
|
Control Panel Features |
||
8 |
PRODUCT OVERVIEW |
|
31 |
Cycle Guide |
|
|
Cycle Processes |
||||
8 |
Parts |
|
|||
32 |
Choosing a Cycle |
||||
9 |
Accessories |
||||
33 |
Cycle Settings and Options |
||||
10 |
The Moving Hanger |
||||
34 |
EXTRA Functions |
||||
10 |
The Pants Crease Care |
||||
|
Locking the Controls |
||||
11 |
The Shelf |
|
|||
|
Setting a Delayed Start Time |
||||
11 |
Choosing Styler Features |
|
|||
|
Smart Diagnosis™ |
||||
12 |
|
|
|
||
INSTALLATION |
|
|
Night Care |
||
12 |
Installation Overview |
36 |
SMART FUNCTIONS |
||
12 |
Product Specifications |
||||
36 |
LG SmartThinQ Application |
||||
13 |
Unpacking the Styler |
||||
39 |
Smart Diagnosis™ Function |
||||
13 |
Choosing the Proper Location |
||||
40 |
|
||||
14 |
Installation Location Requirements |
MAINTENANCE |
|||
14 |
Clearances |
40 |
Regular Cleaning |
||
16 |
Leveling the Styler |
|
Cleaning the Interior and Exterior |
||
17 |
Reversing the Door |
|
Cleaning the Lint Filter |
||
17 |
Installing on Carpeting |
|
Cleaning the Aroma Filter |
||
18 |
Installing the Anti-Tip Device |
|
Cleaning the Water Tanks |
||
18 |
Assembling the Drip Tray |
42 |
TROUBLESHOOTING |
||
18 |
Installing Cap Covers |
||||
18 |
Installing Hinge Covers |
42 |
FAQs |
||
43 |
Before Calling for Service |
||||
19 |
OPERATION |
|
|||
44 |
Error Codes |
19Before Use
20Using the Styler
21Sorting Loads
Fabric Care Labels
Grouping Similar Items
Choosing Styler-Safe Clothing
22 Fabric Care Guide
24Checking the Filters Before Every Load Checking the Lint Filter Changing the Aroma Sheet
25Checking the Water Tanks
MFL66101258_EN.indd 2 |
2019. 2. 11. 10:55 |
PRODUCT FEATURES 3
PRODUCT FEATURES
REMOVE ODORS
the Styler's Refresh cycle to quickly and easily remove odors from clothes.
REFRESH CLOTHING OR ADD AN AROMA
Infuse items with the aroma from your favorite dryer fabric softener sheets to keep clothes and accessories looking, feeling, and smelling refreshed.
REDUCE WRINKLES
The Refresh cycle also uses steam and a moving hanger that vibrates approximately 180 times per minute to reduce the wrinkles in clothing. Performance may vary depending on fabric type.
SHARPEN CREASES IN PANTS
Hang dress trousers flat in the Styler's Pants Crease Care feature. It will crease the pants legs and reduce wrinkles elsewhere.
GENTLY AND EFFECTIVELY DRY
heat pump drying technology of the Gentle Dry cycle provides low-heat drying which moisture from clothes without the shrinking or damage associated with hot-air
drying. Gently and safely dry alpaca, camelhair and other non-washable fabrics that have become damp from rain or snow, and wool sweaters, hand-washable knits, and other dryflat items after washing.
SANITIZE AND REDUCE ALLERGENS
The Styler's Sanitary cycle uses TrueSteam™ to destroy bacteria and other microorganisms without damaging clothes. It maintains the optimal temperature necessary to sanitize each garment, destroying bacteria that persist even when clothes are dried in sunlight.
SMART DIAGNOSIS™
Should you experience any technical difficulty with the Styler, it has the capability of transmitting data by phone to the Customer Information Center. The call center agent records the data transmitted from your machine and uses it to analyze the issue, providing a fast and effective diagnosis. (Refer to page 38.)
Wi-Fi CYCLE DOWNLOAD
Download additional Styler cycles to meet individual needs. Download one new cycle at a time.
<![endif]>ENGLISH
MFL66101258_EN.indd 3 |
2019. 2. 11. 10:55 |
4 IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.
There are many important safety messages in this manual and on your appliance. Always read and obey all safety messages.
This is the safety alert symbol. This symbol alerts you to potential hazards that can result in product damage, property damage, or serious bodily harm or death.
The safety alert symbol will be followed by either the hazard signal word WARNING or CAUTION. These words mean:
WARNING Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION Indicates a hazardous situation which, if not avoided, may result in minor or moderate injury, or product damage.
WARNING
To reduce the risk of fire or explosion, electric shock, property damage, injury to persons or death when using this appliance, follow basic safety precautions, including the following:
SAFETY INSTRUCTIONS FOR INSTALLATION
•Contact an authorized service center before installing or relocating the Styler to avoid injury or product damage when moving the product.
•When moving the Styler away from the wall, be careful not to roll over or damage the power cord.
•The appliance is heavy.Two or more people are necessary to move and install the appliance to prevent damage or injury.
•Prior to use, ensure that you are connecting this product to a dedicated grounded electrical outlet rated for use with this product. It is the user’s responsibility to replace a standard 2-prong wall outlet with a standard 3-prong wall outlet.
•Before use, the appliance must be properly installed as described in this manual.
Electric shock can result if the appliance is not properly grounded.
•Do not install the Styler where there may be a danger of the unit falling.The product is not designed for use on ships or airplanes. Check with an authorized LG service center for use under other special circumstances.
•Do not tamper with controls.
•Install the product where the floor is firm and level. The product may vibrate excessively and eventually fall if installed on
an unstable surface, causing damage or injury.
•Keep the front side protected when transporting the appliance. Do not truck from the front. The tempered glass panel on the front of the appliance may break, causing damage or injury.
•Properly ground the appliance to conform with all governing codes and ordinances.
Follow the details in the installation instructions. Electric shock can result if the appliance is not properly grounded.
•Install and store the appliance where it will not be exposed to temperatures below freezing or exposed to the weather. Allow the product to warm to room temperature before use if it was delivered in winter or at sub-sero temperature.
•Do not repair or replace any part of the appliance or attempt any servicing unless specifically recommended in the usermaintenance instructions or in published user-repair instructions that you understand and have the skills to carry out. Failure to follow this warning can cause serious injury, fire, electric shock, or death.
MFL66101258_EN.indd 4 |
2019. 2. 11. 10:55 |
IMPORTANT SAFETY INSTRUCTIONS 5
WARNING
For your safety, the information in this manual must be followed to minimize the risk of fire, explosion, or electric shock, or to prevent property damage, injury to persons, or death.
SAFETY INSTRUCTIONS FOR INSTALLATION
•To reduce the risk of electric shock, do not install the appliance in humid spaces such as a bathroom. Failure to follow this warning can cause death, serious injury, fire, electric shock, or product deformation or malfunction.
•Remove all packing items and dispose of all shipping materials properly. Failure to do so can result in burns, fire, explosion, or death.
•Connect to a properly rated, protected, and sized power circuit to avoid electrical overload. Improper power circuits can melt, creating electric shock and/or fire hazard.
•Keep all packaging from children. Packaging material can be dangerous for children. There is a risk of suffocation.
•Do not install near another heat source such as a stove, oven or heater. Failure to follow this warning can cause product deformation, smoke, or fire.
•Do not place candles, smoking materials, or other flammables on top of the product.
Dripping wax, smoke, or fire can result.
•Remove all protective vinyl film from the product. Failure to do so can cause product damage, smoke, or fire.
SAFETY INSTRUCTIONS FOR CONNECTING ELECTRICITY
•Do not, under any circumstances, cut or remove the ground prong from the power cord. To prevent personal injury or damage to the appliance, the electrical power cord must be plugged into a properly grounded outlet.
•This appliance must be plugged into a 120V, 60-Hz grounced outlet protected by a 15-ampere fuse or circuit breaker. Failure to follow these instructions can result in fire, explosion, or death.
•This appliance must be plugged into a properly grounded outlet. Electrical shock can result if the appliance is not properly grounded. Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded. Failure to follow these instructions can create an electric shock hazard and/or a fire hazard.
•Install the appliance where the plug is easily accessible. Unplug the appliance when not in use to avoid risk of fire or electric shock.
•Unplug the appliance before disassembly or repair to avoid risk of electric shock.
•The appliance should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating plate.
This provides the best performance and also prevents overloading house wiring circuits which could cause a fire hazard from overheated wires.
•Do not use an extension cord to connect to an outlet. Doing so could result in a fire or electric shock.
•Never unplug your appliance by pulling on the power cord. Always grip the plug firmly and pull straight out from the outlet. The power cord can be damaged, resulting in a risk of fire and electric shock.
•Contact LG or a qualified repair person immediately to repair or replace all power cords that have become frayed or otherwise damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either end. The power cord can melt, creating electric shock and/or fire hazard.
•When installing or moving the appliance, be careful not to pinch, crush, or damage the power cord. This will prevent injury and damage to the appliance from fire and electric shock.
•Do not use a multi socket outlet which is not properly grounded (portable). Upon using
a properly-grounded multi socket outlet (portable), use a product with the current capacity of 15A or higher alone. Failure to do so may result in electric shock or fire due to the heat of multi socket outlet. The power may be shut off when the circuit breaker is operated.
<![endif]>ENGLISH
MFL66101258_EN.indd 5 |
2019. 2. 11. 10:55 |
6 IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.
WARNING
To reduce the risk of fire or explosion, electric shock, property damage, injury to persons or death when using this appliance, follow basic safety precautions, including the following:
USE
•Do not allow children to play on or in the appliance. Close supervision of children is necessary when the appliance is used near children.
•Do not climb, stand, or hang on the Styler door or on the shelf or anywhere inside the appliance. The appliance could fall over or
be damaged, or other damage or injury could occur.
•Do not step on the doors to the water tanks. The Styler could fall and cause damage and injury.
•Do not place heavy or dangerous objects on top of the Styler.
•Do not put live animals inside the Styler.
•Do not allow children to climb into the product when it is in use.
•In the event of a gas leak (propane/LPG), ensure adequate ventilation and contact an authorized service center before resuming use. Do not touch or disassemble the electrical outlet of the Styler.
•Do not use or place flammable substances (chemicals, medicine, cosmetics, etc) near the Styler or store them inside the Styler.
Do not place the Styler in the vicinity of flammable gas.
•Disconnect the power cord immediately if you hear a noise, smell a strange odor or detect smoke coming from the appliance.
•In the event of a flood: Do not go near the product when its base is submerged under water. Contact the service center. There is a risk of electric shock or fire.
•Do not use fabric softeners or products to eliminate static unless recommended by the manufacturer of the fabric softener or product.
•Do not place hands or body near steam nozzle during operation. The steam is hot and could cause an injury.
•Do not insert objects into the steam nozzle. Excessive noise and fire could result.
•Do not drink the water from the water supply or drain tanks.
•Do not disassemble or modify the Styler.
•Do not put hands, feet, or metal objects below the Styler.
•Do not operate the Styler or touch the power cord with wet hands.
•Keep fingers out of pinch point areas; clearances between the door and cabinet are necessarily small. Be careful closing door when children are nearby.
•This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision
or instruction concerning the use of the appliance by a person responsible for their safety.
•Do not place items exposed to cooking oils in the Styler. Items contaminated with cooking oils may contribute to a chemical reaction that could cause a load to catch fire.
•Do not dry articles that have been previously cleaned in, washed in, soaked in, or spotted with gasoline, dry-cleaning solvents, or other flammable or explosive substances, as they give off vapors that could ignite or explode.
•Do not use heat to dry articles containing foam rubber or similarly textured rubber-like materials.
MFL66101258_EN.indd 6 |
2019. 2. 11. 10:55 |
IMPORTANT SAFETY INSTRUCTIONS 7
WARNING
To reduce the risk of fire or explosion, electric shock, property damage, injury to persons or death when using this appliance, follow basic safety precautions, including the following:
•Do not open door during operation. The performance of the product may be adversely affected. If the product is installed on or near carpet, condensation from escaping hot air or steam may stain or damage the carpet.
•Do not use the product for other than the intended purposes. Damage incurred by using the product for purposes other than those specified in this user manual are not covered by the warranty.
MAINTENANCE AND DISPOSAL
•Wipe foreign objects (such as dust and water) off the prongs of the power plug and contact areas regularly. Do not use a wet or damp cloth when cleaning the plug.
•Do not use an appliance to dry the interior. Do not light a candle to remove interior odors.
•Do not spray water onto the product directly when cleaning. A fire or electric shock may occur.
•Wipe the interior with a dry cloth after use.
•Clean the lint screen before or after each load.
GROUNDING INSTRUCTIONS
yy This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric
shock by providing a path of least resistance for electric current.
yy This appliance must be equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate
outlet that is properly installed and grounded in accordance with all local codes and ordinances.
yy Do not modify the plug. If it will not fit the outlet, have a proper outlet installed by a qualified electrician.
•Do not use a bleaching agent such as oxygen or chlorine-based bleaches on the exterior of the product. Clorox or OxiClean may cause discoloration when applied to the surface of the product.
•Do not use sharp objects when cleaning or operating the controls. An electric shock may occur.
•Avoid hitting the front glass panel with heavy objects. Although it is made of tempered glass, the panel may break in the event of a strong impact and cause injury.
•Keep product free from rodents, insects, and other foreign objects. They may damage wires, causing fire or electric shock.
•Before the appliance is removed from service or discarded, remove the door to the drying compartment. Cut off the power plug and destroy the button section to prevent reuse.
yy This appliance must be connected to a grounded metal, permanent wiring system or an equipment-grounding conductor must be run with the circuit conductors and connected to the
equipment-grounding terminal or lead on the appliance. Electric shock can result if the appliance is not properly grounded.
WARNING
Improper connection of the equipmentgrounding conductor can result in a risk of electric shock. Check with a qualified electrician or service person if you are
in doubt that the appliance is properly grounded.
<![endif]>ENGLISH
MFL66101258_EN.indd 7 |
2019. 2. 11. 10:55 |
8 PRODUCT OVERVIEW
PRODUCT OVERVIEW
PARTS |
|
interior light |
hooks for |
|
|
|
Pants Crease Care |
moving hanger |
|
interior light |
Pants Crease Care |
|
|
shelf holder |
|
|
door* |
shelf |
|
aroma filter |
clip |
|
|
|
steam nozzle |
hot air |
|
circulation vent |
|
water |
water |
drain tank |
supply tank |
drip tray |
|
* The door swing can be reversed by the installer to fit the installation location.
MFL66101258_EN.indd 8 |
2019. 2. 11. 10:55 |
PRODUCT OVERVIEW 9
Accessories
Included Accessories
<![endif]>ENGLISH
shelf |
drip tray |
|
||
|
|
|
|
|
|
|
|
|
|
|
|
2 rear leveling feet |
2 hangers* |
pants hanger* |
|
|
|
4 carpet install spikes |
|
2 non-skid pads |
2 rear cap covers |
|
|
2 hinge covers |
anti-tip kit |
|
wrench |
*An ordinary metal/plastic hanger can be used if the hook is less than 5/32 in. (4 mm) thick. The hook must fit in the indentation in the moving hanger snugly. If the fit is too loose, it may result in vibration, noise, and damage to clothing.
Note
yy Contact the store where the product was purchased or LG customer service at Mexico : 5321 1919, Colombia : 01-8000-910-683, Panama : 805-5454 if any accessories are damaged or missing. Accessories can be purchased separately online at http://www.lg.com
yy For your safety and for extended product life, use only authorized components. The manufacturer is not responsible for product malfunction or accidents caused by the use of separately purchased unauthorized components or parts.
yy The images in this guide may be different from the actual components and accessories, which are subject to change by the manufacturer without prior notice for product improvement purposes.
MFL66101258_EN.indd 9 |
2019. 2. 11. 10:55 |
10 PRODUCT OVERVIEW
THE MOVING HANGER |
• Open the door to the Pants Crease Care by |
Hang clothes on the moving hanger using the |
pressing the icon on the front. |
|
|
hangers provided with the Styler, or use any |
|
plastic or metal hanger that hooks snugly into the |
|
indentations in the moving hanger. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
• Use the moving hanger for suits, coats, |
• The Pants Crease Care keeps pants legs |
|||||||||
jackets, blouses, dresses, skirts, and pants |
creased while reducing wrinkles elsewhere. |
|||||||||
that don’t require a crease. Use the Pants |
• Pants can be pressed while refreshing other |
|||||||||
Crease Care to crease pants. |
||||||||||
items in the same cycle. |
||||||||||
|
|
|
|
|
|
|
||||
• Anything that can be securely placed on a |
• For optimum results, use the Extra Pants |
|||||||||
hanger and steamed or dried without retaining |
||||||||||
hanger marks or other damage can be placed |
Care cycle which is designed for use with |
|||||||||
the Pants Crease Care feature. This cycle can |
||||||||||
on the moving hanger. |
||||||||||
be downloaded using the LG SmartThinQ |
||||||||||
|
|
|
|
|
|
|
||||
• Dry sweaters or knits on the shelf to avoid |
app and used as the Downloaded cycle. For |
|||||||||
hanger marks. |
instructions, see Smart Functions, page 36, |
|||||||||
• Clothing should be securely fastened, with |
and the instructions in the application. |
|||||||||
|
|
|
||||||||
zippers and buttons closed, so that it does not |
Note |
|||||||||
fall off the moving hanger during the cycle. |
||||||||||
• Arrange clothing so it does not touch the sides |
To avoid double creases, run a steam cycle using |
|||||||||
or rear of the cabinet, if possible. Condensation |
the moving hanger to reduce any existing knife |
|||||||||
may form on the interior surface of the cabinet, |
pleats, and then use the pants press. |
|||||||||
and items in contact with the surface may |
||||||||||
|
|
|
||||||||
remain damp at the end of the cycle. Hang |
caution |
|||||||||
larger items on the diagonal indentations on |
||||||||||
the moving hanger. |
• Do not lean on or hang heavy items on the |
|||||||||
|
|
|
|
|
|
|
||||
|
caution |
door of the Pants Crease Care. The unit may |
||||||||
• Do not lean or pull on the moving hanger. |
tip, resulting in damage or injury. |
|||||||||
• Do not allow children to play with or hang |
||||||||||
Do not allow children play with or hang |
||||||||||
onto the door of the Pants Crease Care. The |
||||||||||
onto the moving hanger. The unit could tip, |
||||||||||
unit may tip, resulting in damage or injury. |
||||||||||
resulting in damage or injury. |
||||||||||
• Keep fingers out of pinch point areas when |
||||||||||
|
|
|
|
|
|
|
||||
THE PANTS CREASE CARE |
closing the door of the Pants Crease Care. |
|||||||||
Supervise nearby children to prevent injuries. |
||||||||||
|
|
|
|
|
|
|
Hang clothes in the Pants Crease Care using the pants hanger provided with the Styler or any pants hanger that fits into the hooks above the door to the Pants Crease Care.
MFL66101258_EN.indd 10 |
2019. 2. 11. 10:55 |
PRODUCT OVERVIEW 11
THE SHELF
Use the shelf when styling clothes or other items that are difficult to hang or that may be damaged by hang drying.
•Use the shelf for stuffed toys, pillows, hats, and other accessories.
•Use the shelf for sweaters, knits, lingerie, or delicate blouses that can show hanger marks, stretching, or other damage if dried on a hanger.
•For best drying performance, do not stack items on the shelf. Dry single items or place items side by side with space between.
•When not in use, store the shelf on the shelf holder knobs in the back of the cabinet.
•For instructions on installing the shelf, see
Assembling the Shelf, page 28. Do not use the shelf for storing heavy items.
•Arrange items on the shelf so they do not touch the sides or rear of the cabinet, if possible. Condensation may form on the interior surface of the cabinet, and items in contact with the surface may remain damp at the end of the cycle.
caution
CHOOSING STYLER FEATURES
item |
how to style it |
|
|
|
|
suit coat, blazer |
moving hanger |
|
|
||
coat, jacket (short) |
||
|
||
|
|
|
coat (long) |
moving hanger |
|
(remove shelf) |
||
|
||
|
|
|
dress (short) |
moving hanger |
|
|
|
|
dress (long) |
moving hanger |
|
(remove shelf) |
||
|
||
|
|
|
skirt |
|
|
|
|
|
lightweight blanket, throw |
|
|
|
|
|
baby blanket |
moving hanger |
|
|
||
pants (not creased) |
||
|
||
|
|
|
shorts |
|
|
|
|
|
children’s clothes |
|
|
|
|
|
scarf |
moving hanger |
|
|
||
tie |
||
or shelf |
||
|
||
shawl |
||
|
||
|
|
|
lingerie |
moving hanger or |
|
shirt, blouse |
shelf (if delicate) |
|
|
|
|
pants (creased) |
Pants Crease |
|
Care |
||
|
||
|
|
|
cap, hat |
|
|
|
|
|
stuffed toys |
|
|
|
|
|
pillow |
shelf |
|
|
||
sweater |
||
|
||
|
|
|
knitwear |
|
|
|
|
|
infant clothes |
|
|
|
|
•Do not use the shelf to store heavy items.
The shelf may fall, resulting in damage or injury.
•Do not step or sit on the shelf. The shelf may fall or the unit may tip, resulting in damage or injury.
<![endif]>ENGLISH
MFL66101258_EN.indd 11 |
2019. 2. 11. 10:55 |
12 INSTALLATION
INSTALLATION
INSTALLATION OVERVIEW
Please read the following installation instructions first after purchasing this product or transporting it to another location.
7 |
/4 |
in. |
|
3 |
|
20cm |
2 in. 5cm
Remove material from inside and outside of cabinet
2 in. 5cm
Unpack and remove |
|
Check and choose the |
Level the Styler |
||||||
shipping material |
|
proper location |
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
100–130V ~ |
Install carpet spikes |
Reverse the door swing |
Connect to grounded outlet |
(if needed) |
(if needed) |
|
PRODUCT SPECIFICATIONS
The appearance and specifications listed in this manual may vary due to constant product improvements.
steam clothing care |
S3*F** |
|
|
|
|
description |
electric machine for maintaining clothing |
|
|
|
|
electrical requirements |
120V ~ 60Hz 1 500W |
|
|
|
|
|
17 ½ in. (W) X 23 in. (D) X 72 13/16 in. (H), 39 ¾ in. (D with door |
|
dimensions |
open) |
|
445 mm (W) X 585 mm (D) X 1850 mm (H), 1010 mm (D with |
||
|
||
|
door open) |
|
|
|
|
net weight |
183 lb (83 kg) |
|
|
|
|
maximum capacity |
4 items |
|
|
|
|
power consumption |
1500 W |
|
|
|
|
safety device |
double overheating safety device, thermal fuse, programming |
|
|
|
MFL66101258_EN.indd 12 |
2019. 2. 11. 10:55 |
|
|
INSTALLATION 13 |
||
|
|
|
|
|
UNPACKING THE Styler |
• Remove tape and any temporary labels |
|||
|
|
|||
|
|
from the Styler before using. |
||
|
Warning |
Do not remove any warning labels, the model |
||
yyUse two or more people to move and |
and serial number label, or the Tech Sheet |
|||
that is located under the front of the Styler. |
||||
|
install the Styler. Failure to do so can result |
|||
|
• To remove any remaining tape or glue, rub |
|||
|
in back injury or other injury. |
|||
yyThe Styler is heavy. Use the wheels at the |
the area briskly with your thumb. |
|||
|
bottom of the product to move it. Push the |
Tape or glue residue can also be easily |
||
|
Styler slowly from about halfway down the |
removed by rubbing a small amount of liquid |
||
|
front side. |
dish soap over the adhesive with your fingers. |
||
yyKeep the Styler upright when moving it. If |
Wipe with warm water and dry. |
|||
|
you lay the Styler on its side, refrigerant may |
• Do not use sharp instruments, rubbing |
||
|
leak and cause the appliance to malfunction. |
alcohol, flammable fluids, or abrasive |
||
yyKeep flammable materials and vapors, |
cleaners to remove tape or glue. |
|||
|
such as gasoline, away from the Styler. |
These products can damage the surface of |
||
|
Failure to do so can result in fire, explosion, |
the Styler. |
||
|
or death. |
|
|
<![endif]>ENGLISH
CHOOSINGTHE PROPER LOCATION
Electricity
Floor
Ambient temperature
Clearances
Install where an outlet is easily accessible.
Use an individual, grounded outlet:120 V ~ 60Hz 15A minimum.
Warning: Do not plug in multiple appliances in the same outlet with the Styler. Overloading house wiring can cause a fire hazard.
To reduce the risk of electric shock, do not install the Styler in a wet or damp area.
Floor must be level and solid enough to support 183 lb (83 kg).
Adjust the leveling legs to compensate for any unevenness in the floor.
Do not install on a platform or a weakly supported structure. If installing on carpeting, see Installing on Carpeting, page 17.
Temperature must be between 50°F (10°C) and 95°F (35°C).
If the ambient temperature is too low or high, performance may be affected. Do not install in direct sunlight or where the temperature may fall below 32°F (0°C).
Allow at least 18 in. (46 cm) in front to open the door.
Allow at least 2 in. (5 cm) on both sides and between the back of the Styler and the wall. Allow at least 7 3/4 in. (20 cm) between the top of the Styler and any overhanging shelves or cabinets.
If the Styler is too close to adjacent items, performance may decrease and electricity consumption may increase.
MFL66101258_EN.indd 13 |
2019. 2. 11. 10:55 |
14 INSTALLATION
INSTALLATION LOCATION REQUIREMENTS
Warning Read all installation instructions completely before installing and operating the Styler. It is important to review this entire manual before installing and using the Styler.
The installation requires:
yy A grounded electrical outlet located within 2 ft. (61 cm) of either side of the appliance.
yy A sturdy floor to support the total appliance weight of 183 lbs (83 kg). The combined weight of any other laundry appliances should also be considered.
WARNING
•Do not install or store the Styler in an area where it will be exposed to water and/or weather. Failure to follow this warning could result in risk of electric shock, injury, or product damage or malfunction.
Clearances
CAUTION
•The floor must be level, with a maximum slope of 1 inch (2.5 cm) under the Styler. If the slope is greater than 1 inch (2.5 cm), the appliance cannot be leveled properly.
•Do not install the Styler on a hollow or flexible platform. Doing so may cause excessive noise and vibration and result in damage or injury if the product tips over.
56½ in. (1435 mm)
16 5/16 in.
(415 mm)
|
2 3/64 in. |
|
15 5/32 in. (385 mm) |
(52 mm) |
|
|
|
72 13/16 in. |
|
|
(1850 mm) |
|
23 in. |
17 1/2 in. |
|
(585 mm) |
(445 mm) |
MFL66101258_EN.indd 14 |
2019. 2. 11. 10:55 |
INSTALLATION 15
Recommended Installation Spacing
The following clearances are recommended for the Styler. Although the Styler has been tested for clearances of 13/16 inch (3 cm) on the sides and rear, recommended clearances should be considered for the following reasons:
Additional space should be considered for ease of installation and servicing.
Additional space might be required for wall, door and floor moldings.
Additional space should be considered on all sides of the Styler to reduce noise transfer.
Additional laundry appliance spacing should also be considered.
7 3/4 in.
(20 cm)
2 in.
(5 cm) 2 in. (5 cm)
18 in. (46 cm) in front
Installation Spacing for Recessed Area or Closet Installation
There should be at least a little space around the Styler (or any other appliance) to avoid contact with walls, furniture, or other appliances during operation. Allow a minimum of 1 3/16 inch (3 cm) on all sides of the Styler to avoid increased noise or damage.
For closet installation, with a door, |
Minimum vent opening for built-in |
|
minimum ventilation openings in the |
installation is 31 ½ sq. in. (200 cm2). |
|
top and bottom of the door are required. |
Built-In Installation |
|
Louvered doors with equivalent ventilation |
Wall |
|
openings are acceptable. |
||
|
Closet Ventilation Requirements
Closets with doors must have both an upper and lower vent to prevent heat and moisture buildup in the closet. One upper vent opening with a minimum opening of 48 sq. in. (310 cm2) must be installed no lower than 6 feet above the floor. One lower vent opening with a minimum opening of 24 sq. in. (155 cm2) must be installed no more than one foot above the floor. One example shown uses vent grilles in the door.
<![if ! IE]> <![endif]>(650mm) |
10 in. (250mm) |
<![if ! IE]> <![endif]>25in.½ |
|
18 in. (455mm) |
|
<![endif]>Wall
15.75 in. (400 mm)
2 in. (50 mm)
Ceiling
2 in. (50 mm)
1 in. (25 mm)
3"in. |
|
|
|
(7.6 cm) |
|
|
|
Vent |
73.8 in. (1,875 mm) |
|
|
|
|
|
|
48 sq. in. |
|
|
13/16in. (30 mm) |
(310 sq. cm) |
|
74.4 in. (1, |
<![if ! IE]> <![endif]>Wall |
|
|
||
|
18 in. (455 mm) |
|
|
Vent |
|
|
|
24 sq. in. |
|
|
|
(155 sq. cm) |
|
|
|
3"in. |
|
|
|
(7.6 cm) |
|
|
|
closet door vent |
19 in. (485 mm) |
24.8 in. (630 mm) |
13/16in. (30 mm) |
|
|
||
requirements |
|
|
|
<![endif]>ENGLISH
MFL66101258_EN.indd 15 |
2019. 2. 11. 10:55 |
16 INSTALLATION
leveling the styler
Warning
yy To reduce the risk of injury to persons, adhere to all industry recommended safety procedures including the use of long-sleeved gloves and safety glasses.
Failure to follow this warning can cause serious injury or death.
yy The appliance is heavy. Two or more people are required when installing the Styler. Failure to follow this warning can cause serious injury or death.
yy To ensure that the Styler provides optimal performance, it must be level. To minimize vibration, noise, and unwanted movement, the floor must be a perfectly level, solid surface.
Note
Adjust the leveling feet only as far as necessary to level the Styler. Extending the leveling feet more than necessary can cause the Styler to vibrate.
1Position the Styler in the final location. Check to make sure it is level. If installing on carpet, see Installing on Carpeting first.
yy All leveling feet must rest solidly on the floor. Gently push on the corners of the Styler to make sure that it does not rock from corner to corner. Make sure there are no gaps between the front leveling feet and the floor.
Warning
yyThe Styler is heavy. Use two or more people if installing the rear leveling feet.
Failure to do so can result in back injury or other injury.
yyKeep the Styler upright when moving and installing it. If you lay the Styler on its side, refrigerant may leak and cause the appliance to malfunction.
2Use the wrench (packaged with the manual) to turn the leveling feet.
Unscrew the front feet to raise the Styler or screw in the feet to lower it. If unable to level the unit using only the front feet, install the two rear leveling feet by tipping the unit. Do not lay the unit down to install the leveling feet.
Raise or lower the unit using the leveling feet until the Styler is level from side to side and front to back.
CAUTION
Make sure that all leveling feet are in firm contact with the floor. If the
Styler is used without leveling, it may fall, causing injury, damage, or product malfunction.
3When the Styler is completely stable and all leveling feet are resting solidly on the floor, tighten the locking nuts.
locking nut
MFL66101258_EN.indd 16 |
2019. 2. 11. 10:55 |
|
|
INSTALLATION 17 |
||
|
|
|
|
|
installing on carpeting |
5 After the spikes have been installed, the |
|||
If installing the Styler on carpeting, follow these |
Styler may need to be leveled again. |
|||
If the carpet has very deep pile or padding, |
||||
instructions. |
||||
the front feet may need to be extended |
||||
|
Warning |
|||
|
slightly to install the drip tray. |
|||
yyThe Styler is heavy. Use two or more |
Warning |
|||
|
people to install the rear leveling feet and |
|||
|
yyTake care when handling the carpet spikes. |
|||
|
carpet spikes. Failure to do so can result in |
|||
|
They are designed to pierce through the |
|||
|
back injury or other injury. |
|||
|
carpet backing and pad and are very sharp. |
|||
yyKeep the Styler upright when moving |
||||
yyKeep fingers and hands out from under |
||||
|
and installing it. If you lay the Styler on |
|||
|
the spikes when setting the unit in place to |
|||
|
its side, refrigerant may leak and cause the |
|||
|
avoid personal injury or product damage. |
|||
|
appliance to malfunction. |
|||
|
|
|
||
1 Move the unit into its final location using |
• Be sure to check and empty the drip tray often. |
|||
|
the back rollers. |
• Do not open the unit during operation to avoid |
||
|
|
|||
2 Install the two rear leveling feet. |
condensation forming on carpet surface, |
|||
|
Tip the unit, do not lay it down, to install the |
which may result in surface mold or mildew. |
||
|
leveling feet. |
|
|
3 |
Level the unit following the instructions in |
• Keep the bottom of the cabinet dry when |
||
filling or emptying water tanks. Keep the |
||||
|
Leveling the Styler. |
|
||
|
|
outside of the water tanks clean and dry to |
||
|
|
|
||
4 |
Install the four carpet spikes |
|
discourage growth of mold or mildew. |
|
|
on the ends of the leveling |
front |
Using Non-Skid Pads |
|
|
feet, with the shorter, |
|
octagonal faces toward the |
(optional) |
|
front. |
||
|
||
|
Non-skid pads prevent the product from shaking |
|
|
or shifting when opening or closing the door. |
|
|
1 Clean the floor to attach the non-skid |
|
|
pads. Use a dry rag to remove and clean |
|
|
foreign objects or moisture. If moisture |
|
|
remains, the non-skid pads may slip. |
|
|
2 Adjust the level after placing the Styler in |
|
|
the installation area. |
<![endif]>ENGLISH
MFL66101258_EN.indd 17 |
2019. 2. 11. 10:55 |
18 INSTALLATION
3 Place the adhesive side of the non-skid |
ASSEMBLING the DRIP Tray |
|
|
pad on the floor. |
|
This side up
|
|
|
Adhesive |
|
|
|
|
|
|
|
|
|
|
|
|||||
|
|
|
side |
|
|
|
|
B |
|
|
|
|
|
||||||
|
|
|
|
|
|
|
|
|
|
Remove |
|
|
|||||||
backing |
|
|
4Recheck the Styler's levelness.
Push or rock the edges of the appliance gently to make sure that the Styler does not rock. If the Styler rocks, level the appliance again.
•The pads may leave a sticky residue when they are removed. The residue can be removed with alcohol.
installing the anti-tip device
•Appliances can tip, resulting in damage or injuries. Do not operate the unit without the anti-tip device in place and engaged.
If an anti-tip device is not properly installed, the appliance could be unexpectedly tipped by a child or adult standing, sitting, leaning, or placing excessive weight on an open door or the interior parts.
•Install the anti-tip device packed with the Styler to reduce the risk of tipping.
Refer to the instructions provided with the antitip kit for proper anti-tip device installation.
•Check that the anti-tip device is properly installed.
With the appliance in its final location, make sure that the slide adjuster on the cord is adjusted until there is about one inch of slack in the cord.
•The use of the anti-tip device does not preclude tipping of the appliance when it is not properly installed.
Before using the Styler, insert the drip tray onto the bottom of the cabinet.
1Hold the tray so the arrow and letter on the front of the tray face up.
2Insert one side of the tray first, then the other. Push the tray until it slides completely in.
3To detach, pull one side out then the other.
If the tray collects water, detach it and empty the water. After emptying it, re-assemble the tray.
•Do not operate the Styler without installing the drip tray. Doing so could lead to water damage caused by leaking.
INSTALLING CAP COVERS
1 Line up the nubs on the cap cover with the holes in the top
corner of the cabinet.
2 Snap the cap cover into place. Repeat with the remaining cap cover on the other corner.
INSTALLING HINGE COVERS
1Open the Styler door.
2Snap the hinge cover onto the lower hinge assembly with the bent edge on the far side from the hinge.
3Repeat with the remaining hinge cover on the upper hinge assembly.
MFL66101258_EN.indd 18 |
2019. 2. 11. 10:55 |
OPERATION 19
OPERATION
BEFORE USE
Clean the Styler.
Clean the Styler thoroughly and wipe off all dust that accumulated during shipping.
See Maintenance, page 38. Do not plug in or operate the appliance until the interior and exterior have thoroughly dried.
Caution
yy Do not scratch the Styler with a sharp object or use a detergent that contains alcohol, bleach, a flammable liquid or an abrasive when removing any tape or adhesive from the Styler,.
yy Do not peel off the model or serial number label or the technical information on the rear surface of the Styler.
Note
Remove adhesive residue by wiping it off with your thumb or dish detergent.
Unpack accessories.
Unpack the shelf and hangers. For instructions on installing or using accessories, see Loading the Styler, pages 25-28. Accessories can be purchased separately from the LG Customer Information Center. Call Mexico : 5321 1919, Colombia :
01-8000-910-683, Panama : 805-5454.
Assemble the drip tray.
Insert the drip tray at the bottom of the cabinet. See
Assembling the DripTray, page 18.
Connect the power supply.
Check if the power supply is connected before use.
Wash dirty clothes if necessary before putting them in the Styler.
The Styler does not have a washing function. Stains and loose dirt from one item may transfer to others during a cycle. Wash or brush off dust and dirt, or spot-clean items, to avoid setting stains or transferring dirt or odors.
<![endif]>ENGLISH
MFL66101258_EN.indd 19 |
2019. 2. 11. 10:55 |
20 OPERATION
using the styler
1 PREPARE ITEMS
• Wash clothes first, if needed.
• No heat-sensitive items or items that can be damaged by exposure to water. See Choosing Styler-Safe Clothing, page 21.
• Place items on hangers or the shelf.
• Fasten buttons and close zippers to keep items on moving hangers and prevent damage.
2 CLEAN LINT FILTER, CHANGE SHEET IN AROMA FILTER
Lift out filter and remove lint from last load for faster and more efficient performance. Reinstall filter, checking alignment when closing grill. Do not operate the Styler without the lint filter in place. See Checking the Lint Filter, page 24. If using a fabric softener sheet in the aroma filter, change it after every use. See Changing the Aroma Sheet, page 24.
3 CHECK WATER TANKS
Fill water supply tank if needed. Empty water drain tank if needed. Use clean tap water in the supply tank for better product performance and lifespan. Do not use distilled water or reuse water from the drain tank. See Checking theWaterTanks, page 25.
4 LOAD STYLER
Pay attention to fabric care labels and cycle choice. If clothing is not appropriate for the cycle selected, it may shrink or be seriously damaged. See Loading the Styler, page 25.
Remove all empty hangers to avoid noise, friction, and damage to clothing.
5 TURN ON STYLER
Touch Power to turn on the Styler.
6 SELECT CYCLE
Touch icons to select desired cycle and settings. See the Cycle Guide, page 31.
7 BEGIN CYCLE
Touch and hold Start/Pause to begin cycle. Pause cycle at any time by touching Start/Pause again. Restart cycle within four minutes of pausing it, or the Styler shuts off and settings are lost. Do not open door during cycle. If steam or hot air escape from open door, condensation may collect on floor or walls, resulting in damage or mold.
8 END OF CYCLE
Remove items when cycle finishes. Leave door open to let hot air escape. Interior light shuts off after 4 minutes if door is left open.
MFL66101258_EN.indd 20 |
2019. 2. 11. 10:55 |
OPERATION 21
SORTING LOADS
Fabric Care Labels
Most articles of clothing feature fabric care labels that include instructions for proper care. Below are some of the symbols that are relevant to choosing appropriate items for the Styler.
fabric care labels that can be used with the |
|||
category |
label |
meaning |
Styler |
|
|
hand wash |
|
|
|
machine wash, |
|
|
|
normal cycle |
|
|
|
perm press/wrinkle |
|
washing |
|
resistant |
|
labels |
|
gentle/delicate |
|
|
|
||
|
|
do not wash |
* |
|
|
normal |
|
|
|
permanent press/ |
|
|
|
wrinkle resistant |
|
|
|
gentle/delicate |
|
|
|
do not tumble dry |
|
drying |
|
do not dry |
NO |
labels |
|
||
|
|
line/hang dry |
|
|
|
drip dry |
|
|
|
dry flat |
|
|
|
high |
|
|
|
medium |
|
dryer |
|
|
|
heat setting |
|
low |
|
labels |
|
|
NO |
|
|
no heat/air dry |
*Some items such as fur and leather which are labeled as do not wash can be used with the Styler. See the
Fabric Care Guide on pages 22–23.
Grouping Similar Items
•For best fabric care results, always treat fabrics with similar care requirements together.
•Different fabrics have different care requirements, and some fabrics cannot be treated in certain Styler cycles or should be treated separately.
Choosing Styler-Safe Clothing
Some items are not appropriate for use with this product.
•Do not put the following items in the Styler.
category |
non-Stylable items |
|
|
clothes |
starched clothes, vinyl |
|
|
bedding/ |
electric blankets, heavy blankets |
blankets |
(double layer or over 3.3 lb [1.5 |
|
kg]) |
|
|
other |
shoes, items made with sponge |
|
rubber, items with adhesives |
|
|
•Follow fabric care labels.
•Don’t put items that are sensitive to heat or are not suitable for washing with water in Styler cycles that use steam. Use the Gentle Dry cycle only.
•Fur, leather (only 100% natural leather), and silk items should only be treated with the Air Fresh cycle. This cycle is a downloadable cycle. See Downloading Cycles, page 32.
•Using the wrong cycle for items can result in damage to fabrics.
•Wash heavily soiled or stained clothes before putting them in the Styler. The Styler does not have a washing function. Loose
soil or stains can be transferred between garments during cycles.
•Treat items with an unpleasant odor in a separate load. Odors can be transferred between items during cycles.
•Some odors can be difficult to remove.
Odors from oily substances may be difficult for the steam to penetrate. Odors from extended storage may also be difficult to remove.
•Wrinkles may remain in some items.
Wrinkles caused by extended storage may be difficult to reduce. Wrinkles in cotton or linen may not be reduced completely.
<![endif]>ENGLISH
MFL66101258_EN.indd 21 |
2019. 2. 11. 10:55 |
22 OPERATION
Fabric Care Guide
= yes
§ = check label
<![endif]>natural fibers
|
fabric |
|
|
|
cotton |
|
|
|
<![if ! IE]> <![endif]>fibers |
|
|
<![if ! IE]> <![endif]>vegetable |
|
hemp, |
|
|
linen, |
|
|
ramie |
|
|
alpaca, |
|
|
camel hair, |
|
|
cashmere |
|
|
fur, |
|
|
leather |
<![if ! IE]> <![endif]>fibers |
|
|
<![if ! IE]> <![endif]>animal |
|
silk |
|
|
|
|
|
wool |
|
|
|
|
Refresh cycle |
Sanitary |
Gentle |
|
||
|
|
|
|
|||
clothes |
reducing |
removing |
cycle |
Dry |
comments |
|
|
cycle |
|
||||
|
wrinkles |
odors |
|
|
||
towels, socks, |
|
|
|
|
Wrinkles may |
|
underwear, |
|
|
|
|
remain in 100% |
|
jeans, |
|
|
|
|
cotton fabrics. |
|
sportswear, |
|
|
|
|
Iron after cycle, if |
|
t-shirts, blankets |
|
|
|
|
desired. |
|
|
|
|
|
|
Some wrinkles |
|
|
|
|
|
|
may remain. Make |
|
|
|
|
|
|
sure fabrics are |
|
|
|
|
|
|
washable/hand |
|
summer clothes, |
|
|
|
|
washable if using |
|
tablecloths |
|
Refresh/Sanitary |
||||
|
|
|
|
|||
|
|
|
|
|
cycles. Lay clothes |
|
|
|
|
|
|
on shelf if delicate. |
|
|
|
|
|
|
Do not style |
|
|
|
|
|
|
starched clothes. |
|
coats, suits |
§ |
§ |
§ |
|
Lay knits on the |
|
shelf. Alpaca and |
||||||
|
|
|
|
|
||
scarves, |
|
§ |
|
|
camel hair shrink in |
|
knitwear |
|
|
hot water. |
|||
|
|
|
|
|
*Only use |
|
|
|
|
|
|
downloaded Air |
|
|
|
|
|
|
Fresh cycle (low |
|
coats, scarves |
|
|
|
* |
temperature drying). |
|
|
|
|
But, leather is |
|||
|
|
|
|
|
||
|
|
|
|
|
only 100% Natural |
|
|
|
|
|
|
leather (No artificial |
|
|
|
|
|
|
leather) |
|
silk neckties, |
|
|
|
|
*Only use |
|
ribbons, scarves, |
|
|
|
|
downloaded Air |
|
blouses, silk |
|
|
|
|
Fresh cycle (low |
|
velvet/plush |
|
|
|
|
temperature drying). |
|
sweaters, |
|
§ |
|
|
Lay knits on shelf. |
|
|
|
|
Some wool shrinks |
|||
knitwear |
|
|
||||
|
|
when washed in |
||||
|
|
|
|
|
||
|
|
|
|
|
hot water. Make |
|
|
|
|
|
|
||
|
|
|
|
|
sure fabrics are |
|
winter |
|
|
|
|
washable/hand |
|
|
|
|
|
washable if using |
||
coats, suits, |
|
|
|
|
||
|
|
|
|
Refresh/Sanitary |
||
sportswear, |
||||||
|
|
|
|
cycles. Gentle Dry |
||
uniforms |
|
|
|
|
||
|
|
|
|
cycle is safe for |
||
|
|
|
|
|
||
|
|
|
|
|
most. |
|
|
|
|
|
|
|
MFL66101258_EN.indd 22 |
2019. 2. 11. 10:55 |
OPERATION 23
Fabric Care Guide (continued)
|
|
|
|
|
|
|
|
= yes |
|
|
|
|
|
|
|
|
§ = check label |
|
|
|
|
|
|
|
|
|
|
|
|
|
Refresh cycle |
Sanitary |
Gentle |
|
|
|
|
|
|
|
|
|
||
|
fabric |
clothes |
reducing |
removing |
cycle |
Dry |
comments |
|
|
|
|
|
cycle |
|
|||
|
|
|
|
wrinkles |
odors |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
suit lining, |
|
|
|
|
|
|
|
acetate |
blouses, neckties, |
|
|
|
|
|
|
|
|
pajamas |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
thermal |
|
|
|
|
|
|
|
acrylic |
underwear, |
|
|
|
|
Lay clothes on shelf |
|
|
|
knitwear |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
<![if ! IE]> <![endif]>fibers |
|
nylon |
stockings, |
|
|
|
|
Lay clothes on shelf |
|
lingerie |
|||||||
|
|
|
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
<![if ! IE]> <![endif]>made- |
|
|
sportswear, |
|
|
|
|
|
|
|
curtains |
|
|||||
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
<![if ! IE]> <![endif]>man |
|
|
stretchable |
|
|
|
|
If the item contains |
|
|
|
|
|
|
more than 5% |
||
|
|
|
|
|
|
|
||
|
|
polyure- |
clothing |
|
|
|
|
|
|
|
|
|
|
|
polyurethane |
||
|
|
thane |
(containing less |
|||||
|
|
|
|
|
|
(swimwear), check |
||
|
|
|
than 5%) |
|
|
|
|
|
|
|
|
|
|
|
|
label for care |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
rayon |
suit lining |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
<![endif]>ENGLISH
•Fabrics come in a wide variety of weights and finishes and can have different care requirements for each variety. It is difficult to cover them adequately in this manual. Before using the Styler with any item, check the care label before proceeding. Do not put items that are not colorfast, are heat-
sensitive, or are not suitable for washing with water in the Refresh or Sanitary cycles. Do a water blot test on a small, inconspicuous spot (an inside seam) to determine if the fabric is colorfast. For further assistance, consult the clothing manufacturer, a dry cleaning professional, or a more detailed fabric care guide.
•Using the Styler with items that are very wet or are not colorfast may result in damage to the items and staining from fabric dyes on the interior of the cabinet. These stains will not affect the operation of the Styler. Use toothpaste to remove stains from interior of cabinet.
•The Styler does not have a washing function. Wash soiled items before use.
MFL66101258_EN.indd 23 |
2019. 2. 11. 10:55 |
24 OPERATION
CheckING the filters before every load
Checking the Lint Filter
Always make sure the lint filter is clean before starting a new load; a clogged lint filter will increase drying times.
1Open the front grill and take out the lint filter.
Changing the Aroma Sheet
Use a dryer fabric softener sheet to add a refreshing aroma to items. Replace the fabric softener sheet after every use.
1Remove the aroma filter from the Styler.
2Open the aroma filter and insert a dryer fabric softener sheet into it.
2Brush the filter with a soft brush or clean it with a vacuum cleaner.
If the lint filter is torn or damaged, replace it with a new filter.
3Reinstall the filter.
CAUTION
•Check that the sides are aligned correctly when inserting the grill.
3Close the aroma filter and insert it back in the Styler.
Insert the aroma filter in the direction of the arrow. You can adjust the opening of the perfume filter using the adjustment lever. The more open the aroma filter is, the richer the aroma gets.
Left |
Right |
Closed |
Open |
4When the cycle is complete, remove the aroma filter and discard the fabric softener sheet.
Tip : To use your favorite perfume, spray it 4-5 times on a cotton pad and place the pad in the aroma filter. The strength of the resulting fragrance may vary depending on the scent used.
MFL66101258_EN.indd 24 |
2019. 2. 11. 10:55 |
OPERATION 25
checking the water tanks
Check the water in the water tanks before use. The water supply tank must be filled with water before using the Styler. The Styler does not work without water. The water drain tank should be emptied before each use.
1Pull the handle of each tank forward to remove the tank and check the level of water.
water supply tank water drain tank
2Make sure the water supply tank is filled with water.
The full water supply tank can be used approximately four times, depending on the cycles used. Use clean tap water or bottled water for best performance and longer product life. Do not use distilled water or reuse the water from the drain tank.
The first time the Styler is used, 2/3 of the water in the fully filled water supply tank is used. Less water is used in following cycles.
CAUTION
•Only use water when filling the water supply tank. Any other substance, such as detergent or fabric softener, may damage the Styler.
•Use only clean tap water or bottled water. Foreign materials in the water may shorten the lifespan of the Styler.
•Do not use distilled water. The water sensor may not work.
•Do not reuse the water in the drain tank to fill the water supply tank.
3Make sure the water drain tank is empty.
The drain tank will be filled after about three uses. The tank fills more quickly during drying cycles. The Styler does not work if the drain tank is full.
•Some discoloration of the water drain tank may occur over time. This is normal and will not affect product performance.
Loading the styler
CAUTION
yy Check all pockets to make sure that they are empty. Items such as clips, pens, coins, and keys can damage both the Styler and your clothes. Flammable objects such as lighters or matches could ignite, causing a fire. Failure to do so can result in fire, explosion, or death.
yy Never dry clothes that have been exposed to oil, gasoline, or other flammable substances. Washing clothes will not completely remove oil residues. Failure to obey this warning can result in fire, explosion, or death.
yy Remove empty hangers from the moving hanger and place them on the shelf before starting the cycle. Empty hangers may cause unnecessary noise, friction, and damage to fabrics. See Storing Hangers, page 28.
yy Hang hangers in the same direction on the moving hanger to prevent collisions.
accessory |
items to use it with |
|
|
|
|
|
shirts, dresses, suits, coats, |
|
hangers |
skirts, pants without creases |
|
or too large for pants press, or |
||
|
||
|
any item that can use a hanger |
|
|
|
|
Pants Crease |
pants when creases are desired |
|
Care |
||
|
||
|
|
|
|
sweaters, wool, knitwear, |
|
shelf |
lingerie, shoes, hats, toys, and |
|
other clothing or items that |
||
|
||
|
cannot use hangers |
|
|
|
<![endif]>ENGLISH
MFL66101258_EN.indd 25 |
2019. 2. 11. 10:55 |
26 OPERATION
Hangers
The hangers that come with the Styler are for use with the Styler only. Any plastic or metal hanger that has a hook less than 5/32 in. (4 mm) thick and hooks snugly into the indentations in the moving hanger can be used in the Styler.
•Do not use hangers with wool, knitwear, or delicate lingerie. The garments may stretch or be left with hanger marks.
•Wrinkles may appear at the back of the collar on some garments.
•Use the diagonal hanger grooves in the moving hanger for large or bulky items.
•Remove empty hangers or store them in the shelf during operation. See Storing Hangers, page 28.
1Select an appropriate hanger.
Choose the Styler hanger that fits the item you are hanging up.
2Fasten the buttons and zippers on all garments and hang them on hangers.
Doing so helps keep the garments from falling or becoming more wrinkled during the cycle. If a garment has no buttons or zipper, fasten it with a cotton string around the collar area.
3Place the hangers into the slots of the moving hanger
Using the Moving Hanger
1Insert hangers into slots and pull down to secure the hook snugly.
Hooks should fit down in the slots snugly to prevent noise, vibration, or damage to items during operation.
2Use the diagonal slots (2 and 4) for bulky items.
Do not use diagonal slots and standard slots during the same cycle. The hangers may knock into each other and damage clothing.
3Do not overcrowd items.
The fewer items, the better the drying performance. Items that touch the sides of the cabinet may pick up condensation from the cabinet and fail to dry completely.
Pants Hanger or Pants Crease Care
Place pants either on the moving hanger or in the Pants Crease Care, depending on whether maintaining the creases on the pants legs is desired.
•Hanging pants on the moving hanger may reduce the creases on pants legs.
•To maintain the creases on pants legs, use the Pants Crease Care.
•The Pants Crease Care is not designed to work with pants that are wider than 38 in. (96 cm) or longer than 43 5/16 in. (110 cm). Check the size of the pants before using the Pants Crease Care. If pants are too large, use the moving hanger.
•The fabric content of the garments affects how well wrinkles are reduced.
•Use the default downloaded Extra Pants Care cycle for the most effective wrinkle reduction for pants. See Downloading Cycles, page 32.
MFL66101258_EN.indd 26 |
2019. 2. 11. 10:55 |
OPERATION 27
Opening and Closing the Pants Hanger
1To open, fold the hook down toward the hanger blades to unlock and separate the blades.
hook
hanger
blades
2Once pants are inserted, bring the blades together and rotate the hook up and away from the blades to lock them in place.
Hanging Pants On the Pants Hanger
1Remove all objects from pants pockets and button the back pockets.
2 Fold pants along crease lines (or where crease lines would be), and attach the pants hanger at the ends of the pants legs.
3Tug gently on the sides of the pants legs. Make sure pants are stretched tight within the hanger, with no wrinkles, and will not fall out of the hanger during the cycle.
4Place the pants hanger on the moving hanger or in the Pants Crease Care.
Using the Pants Crease Care
1Open the Pants Crease Care by pressing on the icon on the side.
2Hang the pants hanger on the hook above the Pants Crease Care that best fits the length of the pants being pressed.
If the pants are longer, use the higher hooks to keep the pants from hitting the floor of the cabinet.
The Pants Crease Care is not designed to work with pants that are wider than 38 in. (96 cm) or longer than 43 5/16 in. (110 cm). Check the size of the pants before using the Pants Crease Care. If pants are too large, use the moving hanger.
3 Make sure the pants are hanging straight.
Check the creases on the legs to make sure they are lined up. Fix the pants with 2 clips before closing the Pants Crease Care. If the pants legs are not aligned properly or the pants are not
hanging straight, double lines may appear at the pants' edges, or the pants may be wrinkled.
4 Close the Pants Crease Care, then straighten the pants once more.
Gently tug the edges of the pants to smooth out any wrinkles. Make sure the pants are hanging straight in the Pants Crease Care.
<![endif]>ENGLISH
MFL66101258_EN.indd 27 |
2019. 2. 11. 10:55 |
28 OPERATION
Shelf |
• Hang the shelf on the shelf holder when |
Use the shelf for clothes and items that cannot be |
treating long clothes such as coats or dresses. |
|
|
placed on hangers. Do not stack items on the shelf. |
|
For best drying performance, use the shelf for a |
|
single item or smaller items with space between. |
|
Assembling the Shelf
1 Hold the shelf so that the gray trim is toward the front.
Front
|
41.3 in. |
51.2 in. |
Bottom |
105 cm |
130 cm |
2Insert the left shelf groove into the left shelf support, then lower the right shelf groove onto the right shelf support.
Storing Hangers
Remove unused hangers from the moving hanger and store them in the shelf during operation. This prevents noise and damage to clothing.
1Insert the hangers between the rails of the shelf.
Left |
Right |
3To disassemble, lift up the right side of the shelf, then pull out the left side of the shelf from the shelf support.
CAUTION
•The shelf cannot be assembled by sliding it into the cabinet. It will fall if not assembled properly.
•Do not place heavy objects on the shelf or use it to store objects. Doing so can cause the product to malfunction.
•Do not allow children to climb on or hang on the shelf. They could be injured.
2When styling long clothes, if the shelf is stored on the shelf holder, store the
hangers outside the unit during operation.
3Do not use the shelf to store heavy items.
MFL66101258_EN.indd 28 |
2019. 2. 11. 10:55 |
OPERATION 29
CONTROL PANEL
The control panel responds to touch using static electricity. A light touch is enough to operate it. Use a cloth when cleaning the controls to avoid contacting and activating the keys. Foreign substances on the control, wearing gloves, or touching the keys through cloth may prevent the keys from activating.
Control Panel Features
Depending on the model, some of the following functions may not be available.
|
|
|
|
|
|
|
|
|||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
<![endif]>ENGLISH
SMART DIAGNOSIS™ ICON
Place the phone over this icon when diagnosing problems with Smart Diagnosis. See Using Smart Diagnosis, page 38.
POWER ON/OFF
Touch Power to turn the Styler ON/OFF. Once the cycle is complete, the Styler automatically turns off after a few seconds if no keys are touched.
NOTE: Touching Power during a cycle will cancel that cycle and the cycle settings will be lost.
CYCLE COMPLETION INDICATOR
This portion of the display shows which stage of the styling cycle is currently underway (Preparing, Steaming, Drying, Sanitizing, or Night Care).
OPTION AND ALERT INDICATORS
Delay On: lights when the Delay Start feature is set.
Fill Water: lights when the water supply tank is missing or empty.
Empty Water: lights when the water drain tank is missing or full.
Night Care: lights when the Night Care feature is set.
Remote: lights when the Remote Start function is set.
Wi-Fi: lights when the Wi-Fi function is set.
TIME DISPLAY
The display shows the estimated time remaining and error messages for the Styler.
The cycle time may vary by usage conditions.
START/PAUSE
Touch and hold to START the selected cycle. If the Styler is running, touch to PAUSE the cycle without losing the current settings.
NOTE: If you do not touch Start/Pause to resume a cycle within an hour of pausing it, the Styler turns off automatically.
SmartThinQ
Search for the LG SmartThinQ application from the Google Play Store or Apple App Store on a smart phone. See Smart Functions, page 36.
REFRESH / *Remote Start
Touch the icon to select a Refresh cycle. Touch repeatedly to toggle through the settings. See the
Cycle Guide, page 31.
Press and hold for three seconds to activate the Remote function. See Smart Functions, page 36.
MFL66101258_EN.indd 29 |
2019. 2. 11. 10:55 |