<![endif]>INDONESIAN ENGLISH
OWNER’S MANUAL
COMMERCIAL
DRYER
Before beginning installation, read these instructions carefully. this will simplify installation and ensure that the dryer is installed correctly and safely. leave these instructions near the dryer after
installation for future reference.
RP1329A7S
Original instructions
www.lg.com
MFL67863730 |
Copyright © 2019 LG Electronics Inc. All Rights Reserved. |
Rev.01_050919 |
|
2 CONTENTS
CONTENTS
3 |
PRODUCT FEATURES |
43 |
MAINTENANCE |
||
|
|
|
|
|
|
4 |
IMPORTANT SAFETY |
44 |
STACK MACHINE INSTALLATION |
||
|
INSTRUCTIONS |
|
|
INSTRUCTIONS |
|
|
|
|
|
|
|
5 |
BASIC SAFETY PRECAUTIONS |
44 |
Suitable model for stacking |
||
7 |
GROUNDING INSTRUCTIONS |
44 |
Sliding kit |
||
7 |
SAFETY INSTRUCTIONS FOR INSTALLATION |
44 |
Stacking kit |
||
9 |
SAFETY INSTRUCTIONS FOR CONNECTING |
45 |
Stacking the machine |
||
|
ELECTRICITY |
45 |
Stacking bracket installation |
||
11 |
INTRODUCING YOUR DRYER |
46 |
ERROR MODE |
||
|
|
|
|
|
|
11 |
Specifications |
|
|
|
|
12 |
Control panel feature |
46 |
POWER FAIL RECOVERY |
||
|
|
||||
14 |
OPERATING YOUR DRYER |
|
|
|
|
|
|
|
|||
|
|
46 |
DEFAULT DRYER SETTINGS |
||
15 |
PROGRAMMING MODE |
||||
|
|
|
|||
|
|
|
|||
|
|
47 |
WARRANTY |
||
18 |
Programming Mode - Setup Mode |
||||
|
|
|
181. How to change regular price.
192. How to change special price
203. How to enter the FEA1
24 4. How to enter the special price day setup
265. Special price beginning time setup
276. Special price ending time setup
287. Regular priced dryer cycle time
298. Special priced dryer cycle time
309. Value of coin 1
3110. Value of coin 2
(Set up for top off price and e-suds coin pulse)
3211. Top off time
3312. Beep volume
3413. Time to keep the coin (Use only for coin type)
3514. Product type setup – coin/card type or OPL setup
36Programming Mode - Test Mode
361. Lqc1
372. Factory reset - EEPt
383. Time Set Up
394. Courtesy cycle
405. Cycle Kill
41Programming Mode - Collect Mode
PRODUCT FEATURES |
3 |
PRODUCT FEATURES
OUTSTANDING PERFORMANCE
The dryer features the largest capacity, quick drying times, quiet operation, and an energy-saving system.
ARTISTIC DESIGN
Modern front panel look and big clear glass door make your dryer look stylish
EASY OF USE
An entire selection of user-friendly functions makes operating the dryer easy.
ULTRA CAPACITY
The larger drum enables better tumbling and less tangling and wrinkling of the laundry.
<![endif]>ENGLISH
4 IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
Warning
For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, Injury to persons, or death.
Your Safety and the safety of others is very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word DANGER, WARNING, or CAUTION. These words mean:
DANGER
You will be killed or seriously injured if you don’t immediately follow instructions.
Warning
You can be killed or seriously injured if you don’t follow instructions.
caution
You may be slightly injured or cause damage to the product if you do not follow instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.
The instructions shall state the substance of the following: This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for
their safety.
Children should be supervised to ensure that they do not play with the appliance.
IMPORTANT SAFETY INSTRUCTIONS |
5 |
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
BASIC SAFETY PRECAUTIONS
Warning
To reduce the risk of fire, electric shock, or injury to persons when using this appliance, follow basic precautions, including the following:
•Readallinstructionsbeforeusingthedryer.
•Beforeuse,thedryermustbeproperlyinstalledasdescribedin this manual.
•Donotplaceitemsexposedtocookingoilsinyourdryer.Items contaminated with cooking oils may contribute to a chemical reaction that could cause a load to catch fire.
•Donotdryarticlesthathavebeenpreviouslycleanedin,washed in, soaked in, or spotted with gasoline, dry-cleaning solvents, or other flammable or explosive substances as they give off vapors that could ignite or explode.
•Donotreachintothedryerifthedrumoranyotherpartis moving.
•Donotrepairorreplaceanypartofthedryerorattemptany servicing unless specifically recommended in this Owner’s Manual or in published user-repair instructions that you understand and have the skills to carry out.
•Donottamperwithcontrols.
•Beforethedryerisremovedfromserviceordiscarded,remove the door to the drying compartment.
•Donotallowchildrentoplayonorinthedryer.Closesupervision of children is necessary when the dryer is used near children.
•Donotusefabricsoftenersorproductstoeliminatestaticunless recommended by the manufacturer of the fabric softener or product.
•Donotuseheattodryarticlescontainingfoamrubberor similarly textured rubber-like materials.
•Keepareaaroundtheexhaustopeningandadjacentsurrounding areas free from the accumulation of lint, dust, and dirt.
•Theinteriorofthedryerandexhaustventshouldbecleaned periodically by qualified service personnel.
•Donotinstallorstorethedryerwhereitwillbeexposedtothe weather.
•Alwayschecktheinsideofthedryerforforeignobjects.
•Cleanlintscreenbeforeoraftereachload.
•Do not dry unwashed items in the tumble dryer.
Warning
Never stop a tumble dryer before the end of the drying cycle unless all items are quickly removed and spread out so that the heat is dissipated.
•The lint trap has to be cleaned frequently.
•Lint must not to be allowed to accumulate around the tumble dryer.
•Adequate ventilation has to be provided to avoid the back flow of gases into the room from appliances burning other fuels, including open fires.
• Electric Dryer Max capacity is 10kg
• Gas Dryer Max capacity is 10,2kg
•This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised not to play with the appliance.
• The tumble dryer is not to be used if industrial chemicals have been used for cleaning
<![endif]>ENGLISH
6 IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
■What is not covered.
Service trips to your home to instruct you on the product.
If the product is connected to any voltage other than that shown on the rating plate. If the fault is caused by accidents, neglects, misuses of Acts of God.
If the fault is caused by reasons except for normal domestic use or use in accordance with the owner’s manual. If the fault is caused by pests, for example, rats or cockroaches etc..
Noise or vibration that is considered normal,for example, water drain sound, spin sound or warning beeps. Correcting the installation for example, leveling the product, adjustment of drain.
Normal maintenance recommended by the owner’s manual.
Removal of foreign objects/substances from the machine including the pump and inlet hose filter, for example, grit,nails, bra wires and buttons etc..
Replace fuses in or correct wiring or correct house plumbing. Correction of unauthorized repairs.
Incidental or consequential damage to personal property caused by possible defects with this appliance.
If the product is installed outside the normal service area, any cost of transportation involved in the repair of the products, or the replacement of a defective part, shall be borne by the owner.
READ ALL INSTRUCTIONS BEFORE USE
Warning
For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, Injury to persons, or death.
• Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this appliance or any other appliances.
• Installation and service must be performed by a qualified installer, service agency, or the gas supplier.
WHATTO DO IFYOU SMELL GAS: (Applicable for Gas models)
1.Do not try to light a match or cigarette, or turn on any gas or electrical appliance.
2.Do not touch any electrical switches. Do not use any phone in your building.
3.Clear the room, building, or area of all occupants.
4.Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions carefully.
5.If you cannot reach your gas supplier, call the fire department.
IMPORTANT SAFETY INSTRUCTIONS |
7 |
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
Warning
For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, injury to persons, or death.
GROUNDING INSTRUCTIONS
This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance must be equipped with a cord having an equipmentgrounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. Do not use an adapter or extension cord. Do not remove ground prong. If you don’t have the proper outlet, consult an electrician. Do not modify the plug provided with the appliance.
If it will not fit the outlet, have a proper outlet installed by a qualified electrician.
This appliance must be connected to a grounded metal, permanent wiring system or an equipmentgrounding conductor must be run with the circuit conductors and connected to the equipmentgrounding terminal or lead on the appliance. Electric shock can result if the dryer
is not properly grounded. The appliance may only be installed in a room if the room meets the appropriate ventilation requirements specified in the national installation regulations. Minimum required spacing of
2,54cm to adjacent appliances, walls and furniture.
Warning
Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or service person if you are in doubt as to whether the appliance is properly grounded.
SAFETY INSTRUCTIONS FOR INSTALLATION
Warning
To reduce the risk of fire, electric shock, or injury to persons when using this appliance, follow basic precautions, including the following:
•Properly ground dryer to conform with all governing codes and ordinances. Follow details in the installation instructions. Electric shock can result if the dryer is not properly grounded.
•Before use, the dryer must be properly installed as described in this manual. Electric shock can result if the dryer is not properly grounded.
•Install and store the dryer where it will not be exposed to temperatures below freezing or exposed to the weather.
•All repairs and servicing must be performed by an authorized servicer unless specifically recommended in this Owner’s Manual. Use only authorized factory parts. Failure to follow this
warning can cause serious injury, fire, electric shock, or death.
•To reduce the risk of electric shock, do not install the dryer in humid spaces. Failure to follow this warning can cause serious injury, fire, electric shock, or death.
•Connect to a properly rated, protected, and sized power circuit to avoid electrical overload. Improper power circuit can melt, creating electric shock and/or fire hazard.
•Remove all packing items and dispose of all shipping materials properly. Failure to do so can result in death, explosion, fire, or burns.
•Place dryer at least 18 in. above the floor for a garage installation. Failure to do so can result in death, explosion, fire, or burns.
•Keep all packaging from children. Packaging material can be dangerous for children. There is a risk of suffocation.
•Keep the area underneath and around your appliances free of combustible materials such as lint, paper, rags, chemicals, etc. Failure to do so can result in fire.
•Do not place candles, smoking materials, or other flammables on to top of the product. Dripping wax, smoke, or fire can result.
•Remove all protective vinyl film from the product.
Failure to do so can cause product damage, smoke or fire.
•Means for disconnection with contact separation at least 3mm is that the means for disconnection must be incorporated in the fixed wiring according to the wiring rules.
<![endif]>ENGLISH
8 IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
Warning
For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, injury to persons, or death.
SAFETY INSTRUCTIONS FOR INSTALLATION
•The appliance is not to be used by children or persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction.
Children being supervised not to play with the appliance.
Exhaust/Ducting:
•Gas dryers MUST be exhausted to the outside.
Failure to follow these instructions can result in fire or death.
•The dryer exhaust system must be exhausted to the outside of the dwelling. If the dryer is not exhausted outdoors, some fine lint and large amounts of moisture will be expelled into the laundry area. An
accumulation of lint in any area of the home can create a health and fire hazard.
• Use only rigid metal or flexible metal 4-inch (10.2 cm) diameter ductwork inside the dryer cabinet or for exhausting to the outside. Use of plastic or other combustible ductwork can cause a fire. Punctured ductwork can cause a fire if it collapses or becomes otherwise restricted in use or during installation.
• Ductwork is not provided with the dryer, and you should obtain the necessary ductwork locally. The end cap should have hinged dampers to prevent backdraft when the dryer is not in use. Failure to follow these instructions can result in fire or death.
• Exhaust air must not be discharged into a flue which Is used for exhausting fumes from appliances burning gas or other fuels.
•That the appliance must not be installed behind a lockable door, a sliding door or a door with a hinge on the opposite side to that of the tumble dryer, in such a way that a full opening of the tumble dryer door is restricted.
•The exhaust duct must be 4 inches (10.2 cm) in
diameter with no obstructions. The exhaust duct should be kept as short as possible. Make sure to clean any old ducts before installing your new
dryer. Failure to follow these instructions can result in fire or death.
• DO NOT use sheet metal screws or other fasteners which extend into the duct that could catch lint and reduce the efficiency of the exhaust system. Secure all joints with duct tape. For complete details, follow the Installation Instructions. Failure to follow these instructions can result in fire or death.
•In the appliance enclosure or in the built-in structure, keep ventilation opening clear of obstruction.
•Adequate ventilation has to be provided to avoid the back flow of gases into the room from appliances burning other fuels, including open fires Do not dry unwashed items in the tumble dryer.
IMPORTANT SAFETY INSTRUCTIONS |
9 |
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
Warning
For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, injury to persons, or death.
SAFETY INSTRUCTIONS FOR CONNECTING ELECTRICITY
Warning
To reduce the risk of fire, electric shock, or injury to persons when using this appliance, follow basic precautions, including the following:
•Do not, under any circumstances, cut or remove the ground prong from the power cord. To prevent injury to persons or damage to the dryer, the electrical power cord must be plugged into a properly grounded outlet.
•For personal safety, this dryer must be properly grounded. Failure to do so can result in electric shock or injury.
•Refer to the installation instructions in this manual for specific electrical requirements for your model.
Failure to follow these instructions can create an electric shock hazard and/or a fire hazard.
•This dryer must be plugged into a properly grounded outlet. Electric shock can result if the dryer is not properly grounded. Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded.
Failure to follow these instructions can create an electric shock hazard and/or a fire hazard.
•The dryer should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating plate. This provides the best performance and also prevents overloading house wiring circuits which could cause a fire hazard from overheated wires.
•Never unplug your dryer by pulling on the power cord. Always grip plug firmly and pull straight out from the outlet. The power cord can be damaged, resulting in a risk of fire and electric shock.
•Repair or replace immediately all power cords that have become frayed or otherwise damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either end. The power cord can melt, creating electric shock and/or fire hazard.
•When installing or moving the dryer, be careful not to pinch, crush, or damage the power cord. This will prevent injury and prevent damage to the dryer from fire and electric shock.
•To reduce the risk of injury to persons, adhere to all industry recommended safety procedures
including the use of long sleeved gloves and safety glasses. Failure to follow all of the safety warnings in this manual could result in property damage, injury to persons or death.
•The final part of the tumble dryer cycle occurs without heat (cool down cycle) to ensure that the items are left at a temperature that ensures that the items will not be damaged.
<![endif]>ENGLISH
SAVE THESE INSTRUCTIONS
10 IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
CAUTION
These instructions are only valid if the following country code is on the appliance. If this code is not present on the appliance, it is necessary to refer to the technical instructions which will provide the necessary information concerning the modification of the appliance to the condition of use for the country Before installation, check that the local distribution conditions, nature of gas and pressure, and the adjustment of the appliance are compatible.
•the method of connection and the installation regulations in the country where the appliance is to be installed
(if such regulations exist); also the ventilation dimensions shall be given for the purposes of installation in those countries where there are no appropriate regulations.
Warning
Never stop a tumble dryer before the end of the drying cycle unless all items are quickly removed and spread out so that the heat is dissipated.
SAVE THESE INSTRUCTIONS
INTRODUCING YOUR DRYER
Specifications
INTRODUCING YOUR DRYER 11
<![if ! IE]><![endif]>ENGLISH
Model |
RP1329A7S |
|
|
|
|
Type |
Gas Dryer |
|
|
|
|
Specification |
Please refer to the rating label regarding detailed information |
|
|
|
|
Rating |
220-240V~,50Hz |
|
|
|
|
Size |
686 mm (P) x 764 mm (L) x 983 mm (T) (Single Dryer) |
|
686 mm (P) x 764 mm (L) x 1954 mm (T) (Stack Dryer) |
||
|
||
|
|
|
Capacity |
10.2 kg |
|
|
|
|
Weight |
59.4 kg |
|
|
|
|
BTU |
21,000 BTU/hr |
|
|
|
NOTE
Specifications subject to change by manufacturer.
12 INTRODUCING YOUR DRYER
Control panel features
■OPL type
-Stack Upper (RP1329A7S)
4 |
1 |
2 |
|
|
3 |
1. Display LED |
3. Start/Pause button |
2. Cycle button |
4. Status LED |
|
|
INTRODUCING YOUR DRYER |
13 |
Status LED |
Display LED |
Cycle button |
|
|
|
|
<![if ! IE]> <![endif]>ENGLISH |
Start/Pause button
Display LED
The Display shows the vend price, remaining time, and programming options.
Error codes are also displayed here.
Start/Pause button
The Start LED flashes when the full vend price has been satisfied then the cycle has been chosen or the machine is paused.
The Start LED flashes when a card is inserted to add time to the current cycle.
If you press the Start/Pause button while dryer is working, machine will be paused.
Cycle button
Press the cycle button to Select the desired cycle based on laundry types and conditions.
High Temp.
Use this cycle to get high heat for heavy fabrics, such as jeans corduroys or work clothes (High heat).
Med Temp.
Use for drying sturdy fabrics such as work casual clothes (Medium heat).
Low Temp.
Use for drying synthetic fabrics,washable knit fabrics and noiron finishes (Low heat).
No Heat
Status LED
LED |
Description |
LED flashes whenever the heating cycle is in operation.
LED flashes whenever the cool down cycle is in operation.
Use for items that require heat-free drying such as plastics or rubber.
14 OPERATING YOUR DRYER
OPERATING YOUR DRYER
1. Ready mode
1)Coin / Card type
-The cycle LEDs flash at the same time, when the price of cycles are equal.
2)OPL type
-The cycle LEDs is lit at the same time, and displayed
‘PUSH’.
2.Insert card/coin/Token (not for OPL type)
■Insert a cash card that has a sufficient balance. The card balance should be more than the programmed vend price for a selected cycle.
NOTE
When the card balance is not enough, machine displays the balance for 5 seconds and then displays
message repetitively
■Insert a sufficient amount of change that is a more than the programmed vend price for a selected cycle.
NOTE
When the coin amount is not enough, the machine will not start.
4. Top off (To add more time)
■After a debit card is inserted, the operating time can be increased to 10 minutes/10p (default), when the
Start button or the chosen course button has been pressed.
(The card should have enough balance to satisfy increasing time.)
■The operating time can be increased to 10 minutes/10p (default) by adding more coins.
NOTE
Owner can control the additional time and money setting (top off price).
When the COOL DOWN has been working, if time is added, it goes back to the DRYING.
Time can be added up 99 minutes.
5. Change cycle
■You cannot change the cycle while the machine is running.
■But if the door is opened, the machine stops temporarily and the cycle can be changed.
■Press the Pause button then you can change the cycle.
3. Select the cycle
Press the desired cycle and the start button. The display LED will show the remaining time and the selected cycle starts.
NOTE
The last 2 minutes of the remaining time are always for the cool down portion.
6. Cycle finish
■After the COOL DOWN of cycle, the machine stops and LED display shows End.
If you press any key or open the door, the dryer defaults to the ready mode.
PROGRAMMING MODE 15
PROGRAMMING MODE
1. Programming mode
You can check machine information or change setting on Program setup or Diagnostic test. There are two methods that you can enter programming mode.
■ How to enter “Programming mode”
You can enter programming mode only for Idle state and pause state.
- Card Type
1)Insert service card.
2)Display will show
- Coin Type
1)Dissemble upper coin box key.
2)Take out the coin drop from the coin box.
3)Turn on/off the toggle switch at the back of the coin box.
4)Display will show“ ”.
- OPL/Coin Type
1)Push the HighTemp. and LowTemp. button at the same time.
2)Push the MedTemp. button 3 times.
3)Push the Start button.
4)Display will show“ ”
■ How to use button
You can change Dryer vend price, cycle time and Cycle parameters, etc.
Press button |
Description |
|
|
|
|
HighTemp. |
Move to upper level |
|
|
|
|
Med Temp. |
Move to the mode in the |
|
same level (+) |
||
|
||
|
|
|
Low Temp. |
Move to the modes in the |
|
same level (-) |
||
|
||
|
|
|
No Heat |
- |
|
|
|
|
Start |
Enter the selected mode |
|
|
|
<![endif]>ENGLISH
Coin Box Key
CoinVault |
Insert debit card |
Coin type |
Card type |
OPL type |
NOTE
•If you turn on the power without connecting the meter case for the first time, the machine will display .
•When the machine comes from the factory, it is set in the coin type.You can change Card/Coin type by button.
(For more information refer to SETUP mode’s /
.)
•The machine will display“PUSH”for OPL type
16 PROGRAMMING MODE
Card / Coin type
■Algorithm Flow Chart shows how to control programming mode.
■Before program set, check the structure of programming mode.
1.Turn on/off toggle switch or Insert the service card to entering set up mode.
2.Press HighTemp. button to move the upper level.
3.Press MedTemp.(+) or LowTemp.(-) button if you want to be at the same level.
4.Press Start button to enter the details of Set up, DiagnosticTests mode.
is to set price value, time value and vend type etc.
consists of line test, reset, free cycle and kill cycle.
Is to collect the usage data.
■ Structure of Programming mode |
NOTE
•Do not use ,
.
•It is only used in inspecting the machine.
PROGRAMMING MODE 17
OPL type
■Algorithm Flow Chart shows how to control programming mode.
■Before program set, check the structure of programming mode.
OPL/Coin Type
1)Push the HighTemp. and LowTemp. button at the same time.
2)Push the MedTemp. button 3 times.
3)Push the Start button.
4)Display will show“ “
is to set price value, time value and vend type etc.
consists of line test, reset, free cycle and kill cycle.
Is to collect the usage data.
■ Structure of Programming mode |
NOTE
•Do not use ,
.
•It is only used in inspecting the machine.
<![endif]>ENGLISH
18 PROGRAMMING MODE
PROGRAMMING MODE - Setup Mode
Setup Mode : (display)
■ You can change dryer vend price, cycle time, and cycle parameters, etc. ■ Entering set up mode
•Coin type -Turn on/off toggle switch.
•Card type - Insert the service card.
•Stack type -Take off control panel, and turn on/off toggle switch.
•OPL/CoinType – Push“HighTemp.”+“LowTemp.”and the‘3’.
•Then, dryer displays .
1. How to change regular price.
Entering set up mode.
You will see LqC1
Button |
Display |
Press the High Temp. button.
Press the Med Temp. or the Low Temp. button until appears in the display.
Press the Start button.
Press the Start button.
Display previous regular price.
Press Med Temp.(+) or Low Temp.(-) button to set regular price.
(The vend price can be set from 0 to 9.90 in 0.1 increments.)
Press the Start button.
The machine sets up the regular price, then advances to the next process automatically.
1.Continue to set up the next price.
2.Stop the change of setup value and go back to ready mode.
•Coin type -Turn on/off toggle switch.
•Card type - Pull the service card.
•Stack type - 1. Control panel open.
2.Turn on/off toggle switch.
•OPL/CoinType – Press“HighTemp.”twice.
NOTE
•rgCP (regular cold price) is not available in dryer.
•rgrP (regular warm price) is not available in dryer.
•rgHP (regular hot price) is not available in dryer.
PROGRAMMING MODE 19
2. How to change special price
Entering set up mode.
You will see LqC1
Button |
Display |
Press the High Temp. button.
Press the Med Temp. or the Low Temp. button until appears in the display.
Press the Start button.
Press the Med Temp. or the Low Temp. button until appears in the display.
Press the Start button.
Display previous special price.
Press Med Temp.(+) or Low Temp.(-) button to set special price.
(The vend price can be set from 0 to 9.90 in 0.1 increments.)
Press the Start button.
The machine sets up the regular price, then advances to the next process automatically.
1.Continue to set up the next price.
2.Stop the change of setup value and go back to ready mode.
•Coin type -Turn on/off toggle switch.
•Card type - Pull the service card.
•Stack type - 1. Control panel open.
2.Turn on/off toggle switch.
•OPL/CoinType – Press“HighTemp.”twice.
<![endif]>ENGLISH
NOTE
•SPCP (special cold price) is not available in dryer.
•SPrP (special warm price) is not available in dryer.
•SPHP (special hot price) is not available in dryer.
•SCPA (add super cycle price) is not available in dryer.
•SPCt (add super wash type) is not available in dryer.
20 PROGRAMMING MODE
3. How to enter the
Entering set up mode.
You will see LqC1
Button |
Display |
Press the High Temp. button.
Press the Med Temp. or the Low Temp. button until appears in the display.
Press the Start button.
Press the Med Temp. or the Low Temp. button until appears in the display.
■ Structure of |
■ Content of |
• Special price days apply or not
• Disabled
• Add super wash apply or not
• Select vend type
•This function is not available
• Pre-wash apply or not
•Top off apply or not (only for dryer)
• Disable
• Enable
PROGRAMMING MODE 21
3-1. Special price day setup
Entering set up mode.
You will see LqC1
Button |
Display |
Press the High Temp. button.
Press the Med Temp. or the Low Temp. button until appears in the display.
Press the Start button.
Press the Med Temp. or the Low Temp. button until |
|
||
appears in the display. |
|
||
|
|
||
Press the Start button. |
|
||
Display |
. |
|
|
|
|
|
|
Press the Start button. |
One or the other will |
||
display. |
|||
Press Med Temp. or Low Temp. button and then select |
|||
|
|||
or |
. |
|
Coin type
Card type
Press the Start button.
The machine sets up the special price, then advances to the next process automatically.
1.Continue to set up the next mode.
2.Stop the change of setup value and go back to ready mode.
•Coin type -Turn on/off toggle switch.
•Card type - Pull the service card.
•Stack type - 1. Control panel open.
2.Turn on/off toggle switch.
•OPL/CoinType - Press“HighTemp.”twice.
<![endif]>ENGLISH
NOTE
•CLEE (clear escrow enable or not) is not available in dryer.
•SUUE (add super wash apply or not) is not available in dryer.
22 PROGRAMMING MODE
3-2. Vend type setup - card type or coin type setup
Entering set up mode.
You will see LqC1
Button |
Display |
Press the High Temp. button.
Press the Med Temp. or the Low Temp. button until appears in the display.
Press the Start button.
Press the Med Temp. or the Low Temp. button until appears in the display.
Press the Start button.
Display .
Press the Med Temp. or the Low Temp. button until appears in the display.
One or the other will Press the Start button. display.
Press Med Temp. or Low Temp. button and then select or
.
Coin type
Card type
Press the Start button.
The machine sets up the vend type, then go to the idle mode automatically.
NOTE
•SEdE (sensor dry apply or not) is not available in dryer.
•PrSH (Pre-wash apply or not) is not available in dryer.
PROGRAMMING MODE 23
3-3. Top off apply or not setup
Entering set up mode.
You will see LqC1
Button |
Display |
Press the High Temp. button.
Press the Med Temp. or the Low Temp. button until appears in the display.
Press the Start button.
Press the Med Temp. or the Low Temp. button until |
|
||
appears in the display. |
|
||
|
|
||
Press the Start button. |
|
||
Display |
. |
|
|
|
|
||
Press the Med Temp. or the Low Temp. button until |
|
||
appears in the display. |
|
||
|
|
|
|
Press the Start button. |
One or the other will |
||
display. |
|||
Press Med Temp. or Low Temp. button and then select |
|||
|
|||
or |
. |
|
Disable
Enable
Press the Start button.
The machine sets up theVend type, then advances to the next process automatically.
1.Continue to set up the next mode.
2.Stop the change of setup value and go back to ready mode.
•Coin type -Turn on/off toggle switch.
•Card type - Pull the service card.
•Stack type - 1. Control panel open.
2.Turn on/off toggle switch.
•OPL/CoinType - Press“HighTemp.”twice.
<![endif]>ENGLISH
24 PROGRAMMING MODE
4. How to enter the special price day setup
Entering set up mode.
You will see LqC1
Button |
Display |
Press the High Temp. button.
Press the Med Temp. or the Low Temp. button until appears in the display.
Press the Start button.
Press the Med Temp. or the Low Temp. button until appears in the display.
Press the Start button.
Display .
■ Structure of
Sunday
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
PROGRAMMING MODE 25
4-1. How to change sunday
Entering set up mode.
You will see LqC1
Button |
Display |
Press the High Temp. button.
Press the Med Temp. or the Low Temp. button until appears in the display.
Press the Start button.
Press the Med Temp. or the Low Temp. button until |
|
||
appears in the display. |
|
||
|
|
||
Press the Start button. |
|
||
Display |
. |
|
|
|
|
|
|
Press the Start button. |
One or the other will |
||
display. |
|||
Press Med Temp.(+) or Low Temp. button and then select |
|||
|
|||
or |
. |
|
Disable
Enable
Press the Start button.
The machine sets up the special price day (Sunday), then advances to the next process automatically.
1.Continue to set up the next mode.
2.Stop the change of setup value and go back to ready mode.
•Coin type -Turn on/off toggle switch.
•Card type - Pull the service card.
•Stack type - 1. Control panel open.
2.Turn on/off toggle switch.
•OPL/CoinType - Press“HighTemp.”twice.
<![endif]>ENGLISH
NOTE
As explained on the previous page, other days can be set up by the same method.
26 PROGRAMMING MODE
5. Special price beginning time setup
Entering set up mode.
You will see LqC1
Button |
Display |
Press the High Temp. button.
Press the Med Temp. or the Low Temp. button until appears in the display.
Press the Start button.
Press the Med Temp. or the Low Temp. button until appears in the display.
Press the Start button.
Display previous special price beginning time.
Press Med Temp.(+) or Low Temp.(-) button to select time between 0 and 23.
Press the Start button.
The machine sets up the special price beginning time, then advances to the next process automatically.
1.Continue to set up the next mode.
2.Stop the change of setup value and go back to ready mode.
•Coin type -Turn on/off toggle switch.
•Card type - Pull the service card.
•Stack type - 1. Control panel open.
2.Turn on/off toggle switch.
•OPL/CoinType - Press“HighTemp.”twice.
PROGRAMMING MODE 27
6. Special price ending time setup
Entering set up mode.
You will see LqC1
Button |
Display |
Press the High Temp. button.
Press the Med Temp. or the Low Temp. button until appears in the display.
Press the Start button.
Press the Med Temp. or the Low Temp. button until appears in the display.
Press the Start button.
Display previous special price ending time.
Press Med Temp.(+) or Low Temp.(-) button to select time between 1 and 24.
Press the Start button.
The machine sets up the special price ending time, then advances to the next process automatically.
1.Continue to set up the next mode.
2.Stop the change of setup value and go back to ready mode.
•Coin type -Turn on/off toggle switch.
•Card type - Pull the service card.
•Stack type - 1. Control panel open.
2.Turn on/off toggle switch.
•OPL/CoinType - Press“HighTemp.”twice.
<![endif]>ENGLISH
NOTE
When setting up a special price period, the ending time must be later than the beginning time.
28 PROGRAMMING MODE
7. Regular priced dryer cycle time
Entering set up mode.
You will see LqC1
Button |
Display |
Press the High Temp. button.
Press the Med Temp. or the Low Temp. button until appears in the display.
Press the Start button.
Press the Med Temp. or the Low Temp. button until appears in the display.
Press the Start button.
Display previous regular priced dryer cycle time.
Press Med Temp.(+) or Low Temp.(-) button to select time between 10 and 99.
Press the Start button.
The machine sets up the regular priced dryer cycle time, then advances to the next process automatically.
1.Continue to set up the next mode.
2.Stop the change of setup value and go back to ready mode.
•Coin type -Turn on/off toggle switch.
•Card type - Pull the service card.
•Stack type - 1. Control panel open.
2.Turn on/off toggle switch.
•OPL/CoinType - Press“HighTemp.”twice.
PROGRAMMING MODE 29
8. Special priced dryer cycle time
Entering set up mode.
You will see LqC1
Button |
Display |
Press the High Temp. button.
Press the Med Temp. or the Low Temp. button until appears in the display.
Press the Start button.
Press the Med Temp. or the Low Temp. button until appears in the display.
Press the Start button.
Display previous special priced dryer cycle time.
Press Med Temp.(+) or Low Temp.(-) button to select time between 10 and 99.
Press the Start button.
The machine sets up the special priced dryer cycle time, then advances to the next process automatically.
1.Continue to set up the next mode.
2.Stop the change of setup value and go back to ready mode.
•Coin type -Turn on/off toggle switch.
•Card type - Pull the service card.
•Stack type - 1. Control panel open.
2.Turn on/off toggle switch.
•OPL/CoinType - Press“HighTemp.”twice.
<![endif]>ENGLISH
NOTE
•CCCC (washing time) is not available in dryer.
•nrPC (rinsing times per cycle) is not available in dryer.
•rt (rinsing time setup) is not available in dryer.
•tSSd (top spin speed) is not available in dryer.