LG MDD-104K, MDD-64K, RDD-264K User Manual

MDD64K (MDD64K, MDS64V)
MDD104K (MDD104K, MDS104V)
MDT354K (MDT354K, MDS354V/W)
RDD264K (RDD264K, RDS264V)

P/NO : MFL41698470

R

êYCCKNâ

ENGLISH

Қазақ тілі

O'ZBEK

мдкД∫злъдД

àÌÚÂÌÂÚ ‡‰ÂÒ : http://www.lge.com

àÌÙÓχˆËÓÌ̇ ÒÎÛÊ·‡ LG :

- Russia : 7-[phone]

- Ukraine : (380-44)490-7777, 8-800-303-0000

- Kazakhstan : 7-[phone], 8-8000-805-805
ëÓÍ ÒÎÛÊ·˚ ÔË·Ó‡ — 7 ÎÂÚ ÒÓ ‰Ì ÔÂ‰‡˜Ë ÚÓ‚‡‡ ÔÓÚ·ËÚÂβ.

MDD64-A5U_ENG.indd 1 2009.5.1 12:45:47 PM

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE
COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.

This lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of uninsulated dangerous voltage
within the product’s enclosure that may be of sufficient magnitude to consti­tute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the product.

WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT
EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
WARNING: Do not install this equipment in a confined space such as a book case or
similar unit.

CAUTION: Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions.

Slots and openings in the cabinet are provided for ventilation and to ensure reliable
operation of the product and to protect it from over heating. The openings shall be
never be blocked by placing the product on a bed, sofa, rug or other similar surface.
This product shall not be placed in a built-in installation such as a bookcase or rack
unless proper ventilation is provided or the manufacturer's instruction has been
adhered to.

CAUTION: This product employs a Laser System.

To ensure proper use of this product, please read this owner’s manual carefully and
retain it for future reference. Shall the unit require maintenance, contact an authorized
service center.

Use of controls, adjustments or the performance of procedures other than those
specified herein may result in hazardous radiation exposure.

To prevent direct exposure to laser beam, do not try to open the enclosure. Visible
laser radiation when open. DO NOT STARE INTO BEAM.

CAUTION: The apparatus shall not be exposed to water (dripping or splashing) and
no objects filled with liquids, such as vases, shall be placed on the apparatus.

CAUTION concerning the Power Cord

Most appliances recommend they be placed upon a dedicated circuit; That is, a

single outlet circuit which powers only that appliance and has no additional outlets or
branch circuits. Check the specification page of this owner's manual to be certain.

Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets,
extension cords, frayed power cords, or damaged or cracked wire insulation are
dangerous. Any of these conditions could result in electric shock or fire. Periodically
examine the cord of your appliance, and if its appearance indicates damage or dete­rioration, unplug it, discontinue use of the appliance, and have the cord replaced with
an exact replacement part by an authorized service center.

Protect the power cord from physical or mechanical abuse, such as being twisted,
kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs,
wall outlets, and the point where the cord exits the appliance.

To disconnect power from the mains, pull out the mains cord plug. When installing the
product, ensure that the plug is easily accessible.

Disposal of your old appliance

1.

When this crossed-out wheeled bin symbol is attached to a product it
means the product is covered by the European Directive 2002/96/EC.

2. All electrical and electronic products should be disposed of separately from
the municipal waste stream via designated collection facilities appointed by
the government or the local authorities.

3. The correct disposal of your old appliance will help prevent potential
negative consequences for the environment and human health.

4. For more detailed information about disposal of your old appliance, please
contact your city office, waste disposal service or the shop where you
purchased the product.

2

Safety Precaution

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

As an Energy Star® Partner,
LG has determined that this
product or product models meet
the Energy Star® guidelines for
energy efficiency.

Energy Star® is a U.S. registered mark.

MDD64-A5U_ENG.indd 2 2009.5.1 12:45:52 PM

3

Safety Precaution 2
Contents 3

Setting up 4
Hooking up the unit 5
Main Unit 6
Remote control 7
Initial Setting the Area Code 8
Adjust the general settings 8-10
Setting the sound mode 10-11
Setting the clock 11

Displaying Disc Information 12
Playing a Disc 12-14
Viewing photo files 14
Listening to the radio 15
Listening to the cassette tapes 15
Listening to music from your external device 16
Using an USB device 16

Contents

Recording to USB 17
Recording to TAPE 18
Synchronized Recording from CD to TAPE 18

Karaoke Basic Playback 19
Reserving the Song 19
Karaoke Menu Playback 20

Language Codes 21
Area Codes 21
Troubleshooting 22
Types of Playable Discs 23
Specifications 24

MDD64-A5U_ENG.indd 3 2009.5.1 12:45:54 PM

4

Setting up

Attaching the speakers to the unit

Connect the black end of each wire to the terminals marked - (minus) and the
other end to the terminals marked + (plus).
To connect the cable to the each speakers, press each plastic finger pad to
open the connection terminals on the back of each speaker. Insert the wire and
release the finger pad.

Be careful of the following

• Be careful to make sure children not to put their hands or any objects into the
*speaker duct.

* Speaker duct : A hole for plentiful bass sound on speaker cabinet (enclosure).

Red

White

Orange

Front

Front

Sub Woofer

In front of you, to the right of the screen.

In front of you, to the le ft of the screen.

This can be placed in any front position.

POSITION

SPEAKER

COLOUR

MDT354 (2.1 channel)

Red

White

Front

Front

In front of you, to the right of the screen.

In front of you, to the left of the screen.

POSITION

SPEAKER

COLOUR

MDD64/MDD104/RDD264 (2 channel)

Remote control Operation

Point the Remote Control at the display window and press the buttons.

Remote control Battery Installation
1 Detach the battery cover on the rear of the remote control.

2 Insert the R03 (size AAA) battery with 3 and # aligned correctly.

MDD64-A5U_ENG.indd 4 2009.5.1 12:45:56 PM

5

Hooking up the unit

COMPONENT VIDEO OUT
(PROGRESSIVE SCAN) jacks
connection

Connect one end of the component
(Y PB PR) cable to the COMPONENT
VIDEO OUT (PROGRESSIVE SCAN)
jack on the unit and other end to the
COMPONENT INPUT jack on your TV.

VIDEO OUT jack connection

Connect the VIDEO OUT jack on the unit
to the corresponding input jacks on your TV
using a Video cable.

AUX IN (L/R) jacks connection

Connect a VCR or Auxiliary device, etc. to the
INPUT jack of this unit.

Press the FUNCTION button on the remote control
until the “AUX” indicator is displayed in the display
window.

Antenna connection

Fit the AM loop aerial to its stand

Connect the AM loop aerial to the unit.

Connect the FM aerial

The reception will be at its best when the two loose ends of
the aerial are in a straight line and horizontal.

MDD64-A5U_ENG.indd 5 2009.5.1 12:45:58 PM

1

Disc tray

2

1/\ Turn ON/ OFF.

3

Display window

4

CLOCK

5

TIMER

6

USER EQ

7

Selects KARAOKE DVD/CD function.

Selects TUNER function.
Selects TAPE function.
Selects AUX function.

8

SET Confirms the settings.

(TIMER/ CLOCK)

CD II Pauses
RDS (optional) Radio data system
USB Selects USB function
DEMO In power off state to

demonstrate the function on display
window. To cancel it, press 1/\ or
this button again.

PRESET (-)
.m TUNING(-)

9

Headphone jack

10

USB connector

11

Cassette Door 1, 2

6

Main unit

12

Z OPEN/CLOSE: Open or close your CD
door.

13

DISC SKIP

Choose a desired disc.

14

EQ

You can choose fixed sound
impression

15

XDSS

Extreme Dynamic Sound System
Reinforce the treble, bass and
surround effect.

MP3 OPT

Optimizes compressible MP3 files so
that it improves the bass sound.

16

REC/PAUSE(USB/TAPE)

17

LG EQ

You can choose fixed sound
impression

18

DUBB. Recording from tape to tape.

CD SYNC. CD to Tape Synchronized.

B PRESET (+)
M> TUNING(+)
x STOP

19

MIC VOL.

Adjust microphone volume.

20

MIC 1, 2

21

Volume control

22

0-9 numerical buttons: Selects

numbered options in a menu.

Power Save Mode

You can set up the unit into an economic
power save mode.
In power-on status, press and hold

1/\

button for about 3 seconds.

- Nothing is displayed in the display win

-

dow when the unit is turned off.

To cancel, press

1/\

.

2

19

3
4
5

6

1

7

8

10

9

22

13
14
15

16

17
18

20

11

21

12

MDD64-A5U_ENG.indd 6 2009.5.1 12:46:1 PM

7

Remote control

a

b

c

d

1

POWER: Switches the unit ON or OFF.
FUNCTION: Selects the function..
SLEEP:

Sets the System to turn off automatically at a
specified time. (Dimmer : Dims the LED (Light-emitting
diode) of front panel by half in power-on status.)

Z OPEN/CLOSE: Open or close your CD door.
TITLE: If the current DVD title has a menu, the title menu

appears on the screen. Otherwise, the disc menu may appear.

DISPLAY: Accesses On-Screen Display.
MENU: Accesses the menu on a DVD disc.
SETUP: Accesses or removes setup menu.

I i U u (left/right/up/down): Used to navigate
on-screen displays.

ENTER: Acknowledges menu selection.
PRESET (U u): Selects programme of Radio.
TUN. -/+ (I i): Tunes in the desired radio station.

*

a

RETURN (O): Moving back wards in the menu.
REC (z): Recording to USB/ TAPE.
STOP (x): Stops playback or recording.
PLAY (B): Starts playback.
MO./ST.: MONO/STEREO FM mode state, selects MONO

or STEREO by pressing this button.

PAUSE/STEP(X): Pausing playback.
KEY CON.(b/#): You can change the key to suit your

vocal range in KARAOKE mode.
TEMPO (-/+): This function enable you to play fast or slow

the music speed in KARAOKE mode.

SCAN(bb/BB): Search backward or forward.
SKIP(./>): Go to next or previous chapter/track/Title.

b

D. SKIP(DISC SKIP): Choose a desired disc.
MUTE: To mute the sound.
VOL (Volume) +/-: Adjusts speaker volume.
EQ/ LG EQ (EQUALIZER Effect): You can choose sound

impressions.

0-9 numerical buttons: Selects numbered options in a menu.
TONE CONTROL( ): Adjusts man’s or woman’s key in the

karaoke mode.

REPEAT: To select a play mode.(Random, Repeat)
SHADOW: It will be highlighted by background shadow.
S-TITLE: During playback, you can select a desired

subtitle language.

c

d

TV Control buttons: Controls the TV. (LG TV only)

PROG./MEMO.: Accesses or removes Program menu.
CLEAR: Removes a track number on the Program List.
KARAOKE: In DVD Function, it can change to Karaoke

function.

MIC VOL.(+/ - ): Adjusts microphone volume.
ECHO VOL.(+/ - ): Adjusts echo volume.
VOCAL FADER: You can enjoy the function as karaoke,

by reducing singer vocal of music in the various source.

: This button is not available.

Controlling the TV.

You can control the sound level, input source, and
power switching of LG TVs as well. Hold POWER (TV)
and press PR/CH (+/–) button repeatedly until the TV
turns on or off.

MDD64-A5U_ENG.indd 7 2009.5.1 12:46:6 PM

8

Adjust the general settings

ON REMOTE

1 Display setup menu SETUP

2 Select a desired option on the first level

U u

3 Move to second level

i

4 Select a desired option on the second level

U u

5 Move to third level

i

6 Change the setting U u and ENTER

Initial Setting the Area Code

1 Display setup menu SETUP

2 Select LOCK menu on the first level

U u

3 Move to second level

The activated Area Code appears on the
second level. i

4 Move to the third level

i

5 Enter a new password numerical buttons

(0-9) and ENTER

6 Recheck the entered new password numerical buttons

(0-9) and ENTER

7 Select a code for a geographic area

After select, Rating and Password will be U u I i and
activated. (page 21) ENTER

8 To confirm what you press

Make sure to finish setting the Area Code
before leaving the setup menu if you cannot
set the rating and Password ENTER

When you use this unit for the first time, you have to set the Area
Code as shown below.

ON REMOTE

Adjust the general settings - More you can do

Adjust the language settings

OSD – Selects a language for the Setup menu and on-screen display.

Disc Audio/ Disc Subtitle/ Disc Menu –

Selects a language for the Audio/ Menu/
Subtitle.

[Original]: Refers to the original language in which the disc was recorded.
[Others]: To select another language, press number buttons then ENTER to

enter the corresponding 4-digit number according to the language
code list in the reference chapter.
Refer to the language code on Page 21.

[Off] (for Disc Subtitle): Turn off Subtitle.

MDD64-A5U_ENG.indd 8 2009.5.1 12:46:7 PM

9

Adjust the display settings

TV Aspect – Select which screen aspect to use based on the shape of your TV

screen.

[4:3]: Select when a standard 4:3 TV is connected.
[16:9]: Select when a 16:9 wide TV is connected.

Display Mode –

If you selected 4:3, you’ll need to define how you would like
widescreen programs and films to be displayed on your TV
screen.

[Letterbox]: This displays a widescreen picture with black bands at the top

and bottom of the screen.

[Panscan]: This fills the entire 4:3 screen, cropping the picture as necessary.

Progressive Scan

Progressive Scan Video provides the high quality pictures with less flickering. If
you are using the Component Video jacks for connection to a TV or monitor that
is compatible with a progressive scan signal, set [Progressive Scan] to [On].
Press ENTER to confirm your selection

- If you not press ENTER within 10 seconds it will be [Off].

Adjust the audio settings

DRC (Dynamic Range Control) – Make the sound accurate when the volume

is turned down (Dolby Digital only). Set to
[On] for this effect.

Vocal – Select [On] to mix karaoke channels into normal stereo. This function is

effective for multi-channel karaoke DVDs only.

2.1 Speaker Setup (MDT354)

ON REMOTE

1 Open the settings menu SETUP

2 Select the audio icon

U u

3 Select right to enter the audio menu, then

select 2.1 Speaker Setup i ENTER

4 Select the speaker you want to adjust

I i

5 Select an option and change the settings U u I i

6 Set the output level (volume) of a speaker

from -5dB to +5dB. I i

7 Test the signals of each speaker

Adjust the volume to your taste
according to these signals. I i

8 Save your settings and exit the Setup

menu O RETURN

MDD64-A5U_ENG.indd 9 2009.5.1 12:46:8 PM

10

Adjust the lock settings

To access the lock options, you must enter the 4-digit password. If you have not
yet entered a password you are prompted to do so. Enter a 4-digit password.
Enter it again to verify. If you make a mistake while entering number, press
CLEAR to delete numbers then correct it.

If you forget your password you can reset it. Press SETUP and Input ‘210499’
and press ENTER. The password has now been cleared.

Rating – Select a rating level. The lower the level, the stricter the rating. Select

[Unlock] to deactivate the rating.

Password – Sets or changes the password for lock settings.

[New]: Enter a new 4-digits password using the numerical buttons then press

ENTER. Enter the password again to confirm.

[Change]: Enter the new password twice after entering the current password.

Area code – Select a code for a geographic area as the playback rating level.

This determines which area’s standards are used to rate DVDs
controlled by the parental lock. See the Area Codes on Page 21.

Adjust the others settings

DivX (R) Registration - We provide you with the DivXR VOD (Video on

demand) registration code that allows you to rent and purchase videos using the
DivXR VOD service.
For more information, visit www.divx.com/vod.
Press ENTER when [Select] icon is highlighted and you can view the
registration code of the unit.

Semi Karaoke - When a chapter/ title/ track is fully finished, this function shows
the score in the screen with a fanfare sound.

SSR (Real Time Score) - This function will be show the Score to real time by

checking interval and beat during sing a song in the
karaoke mode only.

Selects the [On]: Score bar shows levels while checking the interval and beat.
Selects the [Off]: Score bar are not display on the screen.

-This function is not supported the Semi karaoke mode.

Setting the sound mode

USER EQ

1

Press USER EQ.
2 "USER EQ" is displayed.
3 Press SET.
4

Select the sound effect you want among BASS(100HZ), MIDDLE(1kHz),

TREBLE(10kHz) by pressing PRESET(-)/ PRESET(+).

5 Adjust sound level by pressing .m/M>.
6 To finish the setting, press SET.

- This function is not available when a microphone is connected.

VOCAL FADER

You can enjoy the function as karaoke, by reducing singer vocal of music in the
various source. (MP3/ WMA/ CD/ Dolby Digital/ etc.) Press the VOCAL FADER,
and “FADE ON” will appear in display window.
To cancel it, press VOCAL FADER again.

- This function is available to use only when a microphone is connected.

- The quality of the VOCAL FADER may be different depending on the

recording conditions of music files.

- It is not available on the MONO mode.

MDD64-A5U_ENG.indd 10 2009.5.1 12:46:8 PM

11

Enjoying a pre-programmed sound field

Using your player as an alarm clock

1

Press and hold TIMER. Each functions flashes(Ex. TUNER, USB, ...)

2 Press SET when the function you want to be woken by is showing.

If you choose TUNER, “PLAY” and “REC” flashes in the display window
alternately.

3 Choose one of them by pressing the SET.
4 “ON TIME” will be displayed. This is where you set the time you want the

alarm to start. Use .m/M> to change the hours and minutes
and SET to save.

5 The “OFF TIME” will be displayed. This is where you set the time you

want the function to stop.

6 Use .m/M> to change the hours and minutes and press SET

to save.

7 You will be shown the volume (VOL) you want to be woken by. Use

.m/M> to change the volume and SET to save. Switch the
system off. The clock icon “ ” shows that the alarm is set.

8 When the system is turned off you can check the time the alarm and turn

the alarm on and off by pressing TIMER.

Fall asleep while listening to your player

Press SLEEP one or more times to select delay time between 10 and 180 minutes,
after the player will turn off. To check the remaining time, press SLEEP..

The system has a number of pre-set surround sound fields. You can select a
desired sound mode by using EQ/ LG EQ.
The displayed items for the Equalizer may be different depending on sound
sources and effects.

NATURAL You can enjoy comfortable and natural sound.
Local Regionally optimized sound effect.(DANGDUT/ ARABIC/

Specialization PERSIAN/ INDIA/ REGUETON/ MERENGUE/ SAMBA/
equalizer SALSA)

AUTO EQ Realizes the sound equalizer that is the most similar to the

genre of which is included in the MP3 ID3 tag of song files.

POP This program lends an enthusiastic atmosphere to the
CLASSIC sound, giving you the feeling you are at an actual rock,
JAZZ pop, jazz or classic concert.
ROCK

MP3 OPT This function is optimized for compressible MP3/WMA file.

It improves the bass sound.

XDSS ON Reinforce the treble, bass and surround sound effect.
VIRTUAL You can enjoy more virtual surround sound.
NORMAL(OFF) You can enjoy the sound without equalizer effect.

Description

Setting the Clock

1 Turn the power on
2 Press for at least 2 seconds
3 Choose from either

AM 12:00 (for an AM and PM display) or 0:00 (for
a 24 hour display)

4 Confirm your selection
5 Select the hours
6 Press
7 Select the minutes
8 Press

ON UNIT

1/ |

CLOCK

.m/M>

SET

.m/M>

SET

.m/M>

SET

ON DISPLAY

MDD64-A5U_ENG.indd 11 2009.5.1 12:46:10 PM

12

Displaying Disc Information - More you can do

You can select an item by pressing U u and change or select the setting by
pressing I i.

C

urrent title (or track/ file)

number/ total number of titles (or tracks/ files)

Current chapter number/total number of chapters

Elapsed playing time

Selected audio language or channel

Selected subtitle

Selected angle/ total number of angles

Selected

Sound/ EQ mode

Symbol Used in this Manual

All discs and file listed below

ALL

MP3 files

MP3

DVD and finalized DVD±R/RW

DVD

WMA files

WMA

DivX files

DivX

Audio CDs

ACD

Displaying Disc Information

1 Press DISPLAY

2 Select an item

U u

3 Adjust the Display menu settings

I i

4 To return the exit DISPLAY

ON REMOTE

Playing a Disc - More you can do

Playing a DVD that has a menu

DVD

Most DVDs now have menus which load first before the film begins to play. You
can navigate these menus using I i U u to highlight an option. Press PLAY
to select.

Skipping to the next/previous chapter/ track/ file

ALL

Press > to move to the next chapter/ track/ file.
Press . to return to the beginning of the current chapter/ track/ file.
Press . twice briefly to step back to the previous chapter/ track/ file.

Pausing a playback

ALL

Press PAUSE/STEP (X) to pause playback. Press B to continue playback.

Frame-by-Frame playback

DVD DivX

Press PAUSE/STEP (X) repeatedly to play Frame-by-Frame playback.

Playing repeatedly or randomly

ALL

1 Press REPEAT repeatedly. The current track/ file will be played back

repeatedly or randomly.

2 To return to normal playback, press REPEAT repeatedly to select [Off].

Selecting a subtitle language

DVD DivX

During playback, press S-TITLE on the remote control repeatedly.

Fast forward or fast reverse

ALL

1 Press m or M on remote control during playback.
2 You can change the various playback speed by pressing m or M

repeatedly.

3 Press B to continue play at normal speed.

Playing a Disc

ON REMOTE

1 Open the disc tray

2 Insert a disc

3 Close the disc tray

4 To Start playback

5 To stop playback

Z OPEN/CLOSE

Z OPEN/CLOSE

B
x

ON UNIT

Z OPEN/CLOSE

Z OPEN/CLOSE

B

STOP

MDD64-A5U_ENG.indd 12 2009.5.1 12:46:17 PM

13

1.5 times faster playback

DVD

1 Press B when a disc is already playing to watch and listen.
2 B x1.5 will appear on the screen.
3 Press B again to return to normal playback speed.

Slow down the playing speed

DVD

1 While playback is paused, press m/M.
2 You can change the various playback speed by pressing m/M repeatedly.
3 Press B to continue play at normal speed.

Starting play from selected time

DVD DviX

Searches for the starting point of entered time code.

1 Press DISPLAY then select clock icon. and then press ENTER.
2 Enter a time then press ENTER.

For example, to find a scene at 1 hour, 10 minutes, and 20 seconds, enter
“11020” by using numerical buttons and press ENTER. If you enter the wrong
number, press CLEAR to enter again.

Last Scene Memory

DVD

This unit memorizes last scene from the last disc that is viewed. The last scene
remains in memory even if you remove the disc from the player or switch
off the unit. If you load a disc that has the scene memorized, the scene is
automatically recalled.

Screen Saver

The screen saver appears when you leave the unit in stop mode for about five
minutes.

System Select - Optional

You must select the appropriate system mode for your TV system. If “NO DISC”
appears in the display window, press and hold PAUSE/STEP (X) for more than
five seconds to be able to select a system. (PAL/ NTSC/ AUTO)

Mixed disc or USB Flash Drive – DivX, MP3/ WMA and JPEG

When playing a disc or USB Flash Drive contained with DivX, MP3/ WMA and
JPEG files together, you can select file type with MENU button on the remote
control.

Changing the character set to display DivX® subtitle correctly

DviX

1 If the subtitle does not display properly, press and hold S-TITLE about 3

seconds to display the language code menu.

2 Press S-TITLE repeatedly to change the language code until the subtitle is

displayed properly.

DivX disc compatibility with this player is limited as follows

DviX

• Available resolution: within 800x600 (W x H) pixels

• The file name of the DivX subtitle should be entered within 45 characters.

• If there is impossible code to express in the DivX file, it may be displayed as
" _ " mark on the display.

• If the video and audio structure of recorded files is not interleaved,

either video or audio is outputted.

•

Playable DivX file : ".avi", ".mpg", ".mpeg", ".divx"

• Playable Subtitle format : SubRip (*.srt/ *.txt), SAMI (*.smi), SubStation
Alpha (*.ssa/ *.txt), MicroDVD (*.sub/ *.txt), SubViewer 2.0 (*.sub/ *.txt).

• Playable Codec format : "DIVX3.xx", "DIVX4.xx", "DIVX5.xx", "MP4V3",
"3IVX".

• Playable Audio format : "AC3", "PCM", "MP3", "WMA".

• For Discs formatted in Live file system, you can not it on this player.

• If the name of movie file is different from that of the subtitle file, during
playback of a DivX file, subtitle may not be display.

• If you play a DivX file differ from DivXspec, it may not operate normally.

MDD64-A5U_ENG.indd 13 2009.5.1 12:46:17 PM

14

Creating your own program

WMA

MP3

You can play the contents of a disc in the order you want by arranging the order
of the songs on the disc. The program is cleared when the disc is removed.
1 Select a desired music then press PROG./MEMO. or select “ ” and then

press ENTER to add the music to the program list.

2 To add all music in the disc, select “ ” and then press ENTER.
3 Select a music from the program list then press ENTER to start programmed

playback.

4 To clear a music from the program list, select the music you want to clear

then press CLEAR or select “” icon and then press ENTER.
To clear all music from the program list, select “ ” then press ENTER.

Displaying file information (ID3 TAG)

MP3

While playing a MP3 file containing file information, you can display the
information or time by pressing DISPLAY repeatedly.

MP3 / WMA disc compatibility with this player is limited as follows

WMA

MP3

• Sampling frequency : within 32 - 48 kHz (MP3/ WMA)

• Bit rate : within 32 - 320kbps (MP3), 40 - 192kbps (WMA)

• File extensions : “.mp3”/ “.wma”

• CD-ROM file format : ISO9660/ JOLIET

• We recommend that you use Easy-CD Creator, which creates an ISO 9660
file system.

• They should not contain special letters such as / ? * : “ < > l etc.

• The total number of files on the disc should be less than 999.

This unit requires discs and recordings to meet certain technical standards
in order to achieve optimal playback quality. Pre-recorded DVDs are
automatically set to these standards. There are many different types of
recordable disc formats (including CD-R containing MP3 or WMA files) and
these require certain pre-existing conditions (see above) to ensure compatible
playback.

Customers should note that permission is required in order to download
MP3 / WMA files and music from the Internet. Our company has no right
to grant such permission. Permission should always be sought from the
copyright owner.

Viewing photo files

ON REMOTE

1 Open the disc tray

2 Insert a Disc

3 Close the disc tray

4 Select a photo file on

the menu

5 Display the selected

file in full screen

6 To stop playblack

Z OPEN/CLOSE

-

Z OPEN/CLOSE

-

B

STOP

Z OPEN/CLOSE

Z OPEN/CLOSE

U u

ENTER

x

ON UNIT

Viewing photo files - More you can do

Viewing photo files as a slide show

1 Use I i U u to highlight icon then press ENTER to start slide show.

2 You can change slide show speed using I i when icon is highlighted.

Skipping to the next/ previous photo

Press . or > to view the previous/ next photo.

Rotating a photo

Use U u to rotate the photo in full screen.

Pausing a slide show

1 Press PAUSE/STEP (X).
2 Press B or X to continue the slide show.

JPEG disc compatibility with this player is limited as follows

• Normal: 5120 x 3840, Progressive jpeg: 2043 x 1536

• Recording condition: ISO9660 LEVEL 1/ JOLIET

• Maximum files : Under 999.

• Some discs may not operate due to a different recording format or the
condition of disc.

• File extensions: “.jpg”

ACD

MDD64-A5U_ENG.indd 14 2009.5.1 12:46:21 PM

15

Listen to the cassette tapes - More you can do

Playing Fast backward or Forward

After pressing .m/M> (bb/BB on the remote control) during
playback, press B at a point you want.

Dubbing

This function allows you to record from tape to tape.

1 Press TAPE to select “TAPE-1”.
2 Insert the tape as follows.

TAPE1 - Insert a playback tape to dub.
TAPE2 - Insert a blank tape.

3 Press DUBB. “DUBBING” shows. Dubbing starts.
4 To stop dubbing, press x.

Listening to the cassette tapes

1 Open the tape door
2 Insert the tape
3 Close the tape door
4 Select the TAPE function
5 Start the tape playing
6 To stop a tape playing

ON UNIT

Z PUSH EJECT

Z PUSH EJECT

TAPE

B

STOP

ON REMOTE

FUNCTION

B
x

Listening to the radio - More you can do

Looking for radio stations automatically

Press TUNING(-) /TUNING(+)

on the front panel (

TUN.- /TUN.+ on the

remote control)

for more than 0.5 second. The tuner will scan automatically

and stop when it finds a radio station.

Deleting all the saved stations

1 Press and hold PROG./MEMO. “ERASE ALL” shows.
2 Press PROG./MEMO. to erase all the saved stations.

Improving poor FM reception

Press PLAY (B) (MO./ST.) on the remote control.

Listening to the radio

1 Select FM/ AM

2 Select the radio station

3 To ‘save’ a radio station

A preset number will show in
the display.

4 Select the preset number

5 To confirm

press

Up to 50 radio stations can
be saved

6 To select a ‘saved’ station

input the preset number

TUNER

TUNING(-/+)

PRESET(-/+)

PRESET(-/+)

FUNCTION

TUN. -/+

PROG./MEMO.

PRESET U u

PROG./MEMO.

PRESET U u

ON UNIT

ON REMOTE

MDD64-A5U_ENG.indd 15 2009.5.1 12:46:22 PM

16

Listening to music from your
external device

The unit can be used to play the music from many types of external device.

1 Connect the external device to the AUX

connector of the unit.
> If your TV has only one output for

audio(MONO), connect it to the
left(white) audio jack on the unit.

2 Turn the power on.

3 Select the AUX

function.

4

Turn on the external device and start it
playing.

1/ |

AUX

POWER

FUNCTION

ON UNIT ON REMOTE

Your unit

VCR, TV, ...

Using an USB device

ON UNIT ON REMOTE

You can enjoy media files saved on an USB device by connecting the
USB device to the USB port of the unit.
If you want to operate other function, see the CD playback section.

1 Connect the USB device to the USB

port of the unit.

2 Select the USB function.

3 Select a file you want to play.

4 Start your media playing.

5 To stop, press

6 Before disconnecting the portable

USB device, change to any other
function.

USB

./>

B

STOP

TUNER/TAPE/...

FUNCTION

U u

B / ENTER

x

FUNCTION

Compatible USB Devices

• MP3 Player : Flash type MP3 player.

• USB Flash Drive : Devices that support USB 2.0 or USB 1.1.

• This USB Function may not be available depending on devices.

USB device requirement

• Devices which require additional program installation when you have

connected it to a computer, are not supported.

Look out for the follows

• Do not extract the USB device while in operation.

• For a large capacity USB, it may take longer than a few minute to be

searched.

• To prevent data loss, back up all data.

• If you use a USB extension cable or USB hub, the USB device is not

recognized.

• Using NTFS file system is not supported. (Only FAT(16/32) file system is

supported.)

• This unit is not supported when the total number of files is 1000 or more.

• External HDD, Locked devices or hard type USB devices are not supported.

• The unit can not be used as a storage device.

• USB port of the unit can not be connected to PC.

MDD64-A5U_ENG.indd 16 2009.5.1 12:46:23 PM

17

Recording to USB - More you can do

Recording Music file in disc source to USB

One track recording

If the USB recording is played during playback of the CD, the one track/ file
would be recording into the USB.

All tracks recording

If the recording button is pressed at the CD stop, all tracks/ files would be
recording.

Program list recording

USB records after creating your own program if you want to record the track you
want (Audio CD only).

The making of unauthorized copies of copy-protected material, including
computer programs, files, broadcasts and sound recordings, may be an

infringement of copyrights and constitute a criminal offence.

This equipment should not be used for such purposes.

Be responsible

Respect copyrights

Recording to USB

You can record a various sound source to USB.

1 Connect the USB device to the unit.

2 Select a mode in which you want to

record. (TUNER/ CD/ ....)

Play back a sound source first.

3 Start the recording.

> If you press the button on the remote

control, the display changed in the
following order,
“USB REC” <-> “TAPE REC”. Then press
the button on “USB REC” once more.

4 To stop recording, press

ON UNIT ON REMOTE

TUNER/TAPE/...

REC/PAUSE

STOP

FUNCTION

z REC

x

MP3/ WMA

the other sources

AUDIO CD

When you are recording, look out for the following

• You can check the recording percentage rate for the USB record on the

screen during the recording. (AUDIO, MP3/ WMA CD only)

• During recording MP3/ WMA, there is no sound.

• When you stop recording during playback, the file that has been recorded at

that time will be stored. (AUDIO CD Only)

• Do not remove the USB device or turn off during USB recording. If not, an

incomplete file may be made and not deleted on PC.

• If USB recording does not work, the message like “NO USB”, “ERROR”,

“USB FULL” or “NO REC” is displayed on the display window.

• Multi card reader device or External HDD can not be used for USB

recording.

• A file is recoreded by 128Mbyte when you record for a long term.

• When you stop recording during playback, the file will not be stored.

• In the state CD-G, DTS disc USB record is not operated.

• You may not record more than 999 files.

• The numbering of the recording file is entered from the lowest number.

So if you delete some of the recording files, the next recording file could be
the lowest number among them.

• It’ll be stored as follows.

MDD64-A5U_ENG.indd 17 2009.5.1 12:46:25 PM

18

Synchronized Recording from
CD to Tape

1 Open the tape deck and then insert

a blank tape.

> There are 2 tape decks on the unit,

open the second one.

2 Close the door and insert a CD.

> Audio CD only

3 To select CD function, press

4 Press the button on a stop status to

move to CD synchronizing mode.

> Recording automatically starts

7 seconds later after “CD SYNC” blinks.

5 To stop, press

PUSH EJECT

OPEN/CLOSE

KARAOKE

DVD/CD

CD SYNC.

x

Z OPEN/CLOSE

FUNCTION

x

ON UNIT

ON REMOTE

Recording to TAPE

You can record a various sound source to TAPE.

1 Open the tape deck.

> There are 2 tape decks on the unit, open

the second one.

2 Insert a black tape and close the door.

3 Select a mode in which you want to

record.

4 Play back a sound source first.

5 Press

> The display changed in the following

order, “USB REC” <-> “TAPE REC”

6 Press the button once more when

“TAPE REC” is displayed.

> Recording starts.

7 To stop recording, press

PUSH EJECT

TUNER/USB/...

B

REC/PAUSE

REC/PAUSE

x

FUNCTION

B

z REC

z REC

x

ON UNIT ON REMOTE

MDD64-A5U_ENG.indd 18 2009.5.1 12:46:26 PM

19

Karaoke Basic Playback - More you can do

You can change the key to suit your vocal range with Key Control

You can adjust the key to 13 steps (6 steps higher, 6 steps lower and the
original key).

- The setting appears on the screen.

• To flatten the key one by one, press the KEY CON.(b) repeatedly during

playback.

• To sharp the key one by one, press the KEY CON.(#) repeatedly during

playback.

- Press

TONE CONTROL( ) on remote control repeatedly to change MAN’s

or WOMEN’s tone.

To change tempo

You can use this function when you want to play fast or slow.

1 Press TEMPO + repeatedly during singing to play faster.
2 Press TEMPO - repeatedly during singing to play slower.

Shadow Function

If KARAOKE CD caption and the song’s subtitle are mixed up, the song’s
subtitle may be invisible. In this case, to highlight the song’s subtitle, press
SHADOW.

- It will be highlighted by background shadow image.

To adjust ECHO Volume

You can give an echo effect to the sound from the microphones.
Press the ECHO VOL. + on the remote control to increase the echo volume or

ECHO VOL. - decrease it. (MIN, 1~14, MAX steps)

Using Microphone

1 Connect your microphone to the MIC1/ MIC 2 Jacks.

“MIC IN” will be shown in the display window.

2 Play the music you want.
3 Sing along with the accompaniment.

Adjust the microphone volume by pressing MIC VOL.(+/-) button.

Notes:

• When not using the microphone, set the MIC VOL.(+/-) button to minimum or

turn off the MICs and remove the microphone from the MIC Jacks.

• If the microphone is set too near the speaker, a howling sound may be

produced. In this case, move the microphone away from the speaker or
decrease the sound level by using the MIC VOL.(+/-) button.

• If sound through the microphone is extremely loud, it may be distorted. In this

case, press the MIC VOL.(+/-) button toward minimum.-

Reserving the Song - More you can do

To cancel the reserved song

Each time you press CLEAR, the reserved song will be cancelled one by one.

To cancel or change the wrong reserved song

Press the PROG./MEMO. to move to the desired position, then press the
CLEAR to cancel the reserved song.

Karaoke Basic Playback

ON REMOTE

1 Check if the system is connected. (Page 4)

2 Turn on the power of TV and unit.

1 POWER

3 Open the disc tray and insert supplied

karaoke disc. Z OPEN/CLOSE

4 Close the disc tray.

Z OPEN/CLOSE

5

To enter to the DVD/CD(karaoke) mode.

KARAOKE

6 Connect the microphone to the MIC jacks.

7 Press the melody number you want.

If you

want to cancel the selected melody number,
press the CLEAR. NUMERIC No. 0 ~ 9

8 To start, press ENTER or

B PLAY

9 To stop, press

x STOP

Reserving the Song

ON REMOTE

1 To reserve melody number you want in the

karaoke disc play mode, press NUMERIC No. 0 ~ 9

2

To reserve, press
The melody number is reserved PROG./MEMO.

3 Repeat steps 1-2.

You can reserve at most 8 songs

MDD64-A5U_ENG.indd 19 2009.5.1 12:46:27 PM

20

Karaoke MENU playback - More you can do

1. SETUP

Select one you want to activate/deactivate among the following functions.

1. SCORE

2. FANFARE

3. LYRIC

4. CHORUS

Select ON/OFF to activate/deactivate.

2. MUSIC LIST

You can select a desired song on each music list.

1. LOCAL SONG

2. POP SONG

3. CLASSIC

Select one among followings when you selected LOCAL SONG / POP SONG in
the previous step.

1. SONG LIST

2. SINGER LIST

Select one among followings when you selected CLASSIC LIST in the previous
step.

1. CLASSIC LIST

2. COMPOSER LIST

Select initial of song title or entire title.

3. RANDOM

You can enjoy songs randomly.

4. CHALLENGE

You can enjoy a song game dividing by two teams of red team & blue team.

Karaoke MENU Playback

ON REMOTE

1 To move to the main menu, press MENU

The main menu appears on the screen.

2 Select a desired option on the menu.

U u I i

3 Adjust the menu settings

ENTER

or Select a option from the menu.

4

To move the previous mode. O

1 Select .

2 Select .

3 Press .

4 Select number to sing along

with the accompaniment.

5 Repeat the step 4.

Change the team of
red or blue team alternately.

6 When reaching the targeted

winning number, will be
shown on the TV screen.

7 Whether you keep going the

song game or not,
select or .

MDD64-A5U_ENG.indd 20 2009.5.1 12:47:44 PM

21

Area Codes

Choose a area code from this list.

Area Code

Afghanistan AF
Argentina AR
Australia AU
Austria AT
Belgium BE
Bhutan BT
Bolivia BO
Brazil BR
Cambodia KH
Canada CA
Chile CL
China CN
Colombia CO
Congo CG

Area Code

Costa Rica CR
Croatia HR
Czech Republic CZ
Denmark DK
Ecuador EC
Egypt EG
El Salvador SV
Ethiopia ET
Fiji FJ
Finland FI
France FR
Germany DE
Great Britain GB
Greece GR

Area Code

Greenland GL
Hong Kong HK
Hungary HU
India IN
Indonesia ID
Israel IL
Italy IT
Jamaica JM
Japan JP
Kenya KE
Kuwait KW
Libya LY
Luxembourg LU
Malaysia MY

Area Code

Maldives MV
Mexico MX
Monaco MC
Mongolia MN
Morocco MA
Nepal NP
Netherlands NL
Netherlands Antilles AN
New Zealand NZ
Nigeria NG
Norway NO
Oman OM
Pakistan PK
Panama PA

Area Code

Paraguay PY
Philippines PH
Poland PL
Portugal PT
Romania RO
Russian Federation RU
Saudi Arabia SA
Senegal SN
Singapore SG
Slovak Republic SK
Slovenia SI
South Africa ZA
South Korea KR
Spain ES

Area Code

Sri Lanka LK
Sweden SE
Switzerland CH
Taiwan TW
Thailand TH
Turkey TR
Uganda UG
Ukraine uaw
United States US
Uruguay UY
Uzbekistan UZ
Vietnam VN
Zimbabwe ZW

Language Codes

Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu.

Language Code

Afar 6565
Afrikaans 6570
Albanian 8381
Ameharic 6577
Arabic 6582
Armenian 7289
Assamese 6583
Aymara 6588
Azerbaijani 6590
Bashkir 6665
Basque 6985
Bengali; Bangla 6678
Bhutani 6890
Bihari 6672
Breton 6682
Bulgarian 6671
Burmese 7789
Byelorussian 6669
Chinese 9072

Language Code

Croatian 7282
Czech 6783
Danish 6865
Dutch 7876
English 6978
Esperanto 6979
Estonian 6984
Faroese 7079
Fiji 7074
Finnish 7073
French 7082
Frisian 7089
Galician 7176
Georgian 7565
German 6869
Greek 6976
Greenlandic 7576
Guarani 7178
Gujarati 7185

Language Code

Hausa 7265
Hebrew 7387
Hindi 7273
Hungarian 7285
Icelandic 7383
Indonesian 7378
Interlingua 7365
Irish 7165
Italian 7384
Japanese 7465
Kannada 7578
Kashmiri 7583
Kazakh 7575
Kirghiz 7589
Korean 7579
Kurdish 7585
Laothian 7679
Latin 7665
Latvian, Lettish 7686

Language Code

Lingala 7678
Lithuanian 7684
Macedonian 7775
Malagasy 7771
Malay 7783
Malayalam 7776
Maori 7773
Marathi 7782
Moldavian 7779
Mongolian 7778
Nauru 7865
Nepali 7869
Norwegian 7879
Oriya 7982
Panjabi 8065
Pashto, Pushto 8083
Persian 7065
Polish 8076
Portuguese 8084

Language Code

Quechua 8185
Rhaeto-Romance 8277
Rumanian 8279
Russian 8285
Samoan 8377
Sanskrit 8365
Scots Gaelic 7168
Serbian 8382
Serbo-Croatian 8372
Shona 8378
Sindhi 8368
Singhalese 8373
Slovak 8375
Slovenian 8376
Spanish 6983
Sudanese 8385
Swahili 8387
Swedish 8386
Tagalog 8476

Language Code

Tajik 8471
Tamil 8465
Telugu 8469
Thai 8472
Tonga 8479
Turkish 8482
Turkmen 8475
Twi 8487
Ukrainian 8575
Urdu 8582
Uzbek 8590
Vietnamese 8673
Volapük 8679
Welsh 6789
Wolof 8779
Xhosa 8872
Yiddish 7473
Yoruba 8979
Zulu 9085

MDD64-A5U_ENG.indd 21 2009.5.1 12:47:46 PM

22

Troubleshooting

Symptom

Cause Correction

No power

POWER

The power cord is not plugged in.

Plug in the power cord.

No sound

Some noise occurs.

RADIO

The function switch is not set to the Radio mode.

There are electronic devices near the unit.

The antenna is positioned or connected poorly

Set the switch to the Radio mode.

Set the unit far from the devices.

Check the antenna connection and adjust its position

The unit does not start
playback

No picture

DVD/CD

An unplayable disc is inserted.

The disc is placed upside down.

The disc is not placed within the guide.

The TV is not set to receive the video signal

Insert a playable disc.

Place the disc with the playback side down.

Place the disc on the disc tray correctly inside the guide.
Clean the disc.

Select the appropriate video input model on the TV so the
picture from the unit appears on the TV

Unable to record

TAPE

Record protect tabs are removed. Cover holes on back edge of tape with tap.

REMOTE CONTROL

The remote control is not pointed at the remote sensor of
the unit directly.

Point the remote control to remote sensor directly of the
unit.

The remote control does
not work properly.

The battery in the remote control is exhausted. Replace the battery with new ones.

MDD64-A5U_ENG.indd 22 2009.5.1 12:47:46 PM

23

About the x Symbol Display

“ x ” may appear on your TV display during operation and indicates that the
function explained in this owner’s manual is not available on that specific DVD
video disc.

Regional code

This unit has a regional code printed on the rear of the unit. This unit can play
only DVD discs labeled same as the rear of the unit or “ALL”.

• Most DVD discs have a globe with one or more numbers in it clearly visible on
the cover. This number must match your unit’s regional code or the disc can­not play.

• If you try to play a DVD with a different regional code from your player, the
message “Check Regional Code” appears on the TV screen.

Copyrights

It is forbidden by law to copy, broadcast, show, broadcast via cable, play in
public, or rent copyrighted material without permission. This product features
the copy protection function developed by Macrovision. Copy protection sig­nals are recorded on some discs. When recording and playing the pictures
of these discs picture noise will appear. This product incorporates copyright
protection technology that is protected by U.S. patents and other intellectual
property rights. Use of this copyright protection technology must be authorized
by Macrovision, and is intended for home and other limited viewing uses only
unless otherwise authorized by Macrovision. Reverse engineering or disas­sembly is prohibited.

CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION
TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT
AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN
CASE OF 525 OR 625 PROGRESSIVE SCAN PICTURE PROBLEMS, IT
IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO
THE ‘STANDARD DEFINITION’ OUTPUT. IF THERE ARE QUESTIONS
REGARDING OUR TV SET COMPATIBILITY WITH THIS MODEL 525p AND
625p UNIT, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER.

Types of Playable Discs

DVD-VIDEO: Discs such as movies that can

be purchased or rented.

DVD-R: Video mode and finalized only

DVD-RW: Video mode and finalized only

DVD VR format that have been finalized can not be
played in this unit.

DVD+R: Video mode only
Supports the double layer disc also.

DVD+RW: Video mode only

Audio CD: Music CDs or CD-R/ CD-RW in music CD

format that can be purchased.

In addition, this unit can play a DVD±R/RW and CD-R or CD-RW that
contains audio titles, MP3, WMA, JPEG files.
Depending on the conditions of the recording equipment or the CD-R/RW
(or DVD±R/RW) disc itself, some CD-R/RW (or DVD±R/RW) discs may
not be played on the unit due to the recording quality or physical condi­tion of the disc, or the characteristics of the recording device and author­ing software. The disc will not play if it has not been correctly finalized.
Player does not support these kinds of discs.

Logo

Type

“Dolby”, “Pro Logic”, and the double-D symbol are trademarks of Dolby
Laboratories.
Manufactured under license from Dolby Laboratories.

MDD64-A5U_ENG.indd 23 2009.5.1 12:47:51 PM

24

Designs and specifications are subject to change without prior notice.

Specifications

General

Power supply Refer to main label.
Power consumption Refer to main label.
Net Weight MDD64: 5.4 kg MDD104: 5.5 kg MDT354: 5.8 kg RDD264: 5.7 kg
External dimensions (W x H x D) 272 x 334 x 344 mm
Operating conditions Temperature: 5°C to 35°C, Operation status: Horizontal
Operating humidity 5% to 85%

Tuner

FM Tuning Range 87.5 - 108.0 MHz or 87.50 - 108.00 MHz
Intermediate Frequency 128 KHz
AM Tuning Range 522 - 1,620 KHz or 522 - 1,710 KHz or 520 - 1,710 KHz
Intermediate Frequency 45 KHz

Amplifier

OUTPUT POWER MDD64: 30 W x 2 (4 Ω)

MDD104: 50 W x 2 (4 Ω)
RDD264: 130 W x 2 (4 Ω)
MDT354: Front 100 W x 2 (4 Ω)

Subwoofer: 150 W (3 Ω)

DVD/CD player

Frequency response (audio) 40 - 20000 Hz
Signal-to-noise ratio (audio) More than 75 dB (1 kHz)
Signal-to-noise ratio (video) More than 55 dB (1 kHz)
Dynamic range (audio) More than 80 dB

Video output 1.0 V (p-p), 75 Ω
Component Video output (Y) 1.0 V (p-p), 75 Ω

(Pb)/(Pr) 0.7 V (p-p), 75 Ω

Speakers

MDS64V MDS104V MDS354V MDS354W RDS264V
Front Speaker Front Speaker Front Speaker Subwoofer

Front Speaker

Type 2 way 2 speaker

2 Way 2 Speaker 2 way 2 speaker 1 Way 1 Speaker 2 way 2 speaker

Impedance 4 Ω 4 Ω

4 Ω 3 Ω 4 Ω

Rated Input Power 30 W 50 W

100 W 150 W 130 W
Max. Input Power 60 W 100 W 200 W 300 W 260 W
Net Dimensions (W x H x D)

220 x 333 x 253 mm 220 x 333 x 253 mm 220 x 333 x 283 mm 274 x 333 x 342 mm 214 x 382 x 301 mm

Net Weight 3.0 kg 3.2 kg 3.7 kg 5.9 kg 4.1 kg

Cassette tape player

F.F/REW Time 120 sec (C-60)
Frequency Response 250 - 8000 Hz
Signal to Noise Ratio 43 dB
Channel Separation 50 dB (P/B)/45 dB (R/P)
Erase Ratio 55 dB (MTT-5511)

Notice (the date of the production of goods).
First figure ( of the left ) of series number means Year, next 2 figures

- Month of the production of this goods.

MDD64-A5U_ENG.indd 24 2009.5.1 12:47:52 PM