LG NP8540 User manual

SMART Hi-Fi AUDIO

Wireless Multi-room

Model : NP8740 (H7)

NA9740 (H7) NP8540 (H5) NA9540 (H5)

ENGLISH | OWNER’S MANUAL

Please read this manual carefully before operating your speaker and retain it for future reference.

Getting Started2

Safety Information

Getting Started

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK DO NOT REMOVE COVER (OR BACK) NO

USER-SERVICEABLE PARTS INSIDE REFER SERVICING

TO QUALIFIED SERVICE PERSONNEL.

enclosure that may be of sucient magnitude to constitute a risk of electric shock to persons.

in the literature accompanying the product.

WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

WARNING: Do not install this equipment in a conned space such as a book case or similar unit.

CAUTION: Do not use high voltage products around this product. (ex. Electrical swatter) This product may malfunction due to electrical shock.

NOTICE: For safety marking information including product identication and supply ratings, please refer to the main label on the bottom or rear of the apparatus.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

This lightning ash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions

For models using an adapter

Only use the AC adapter supplied with this device. Do not use a power supply from another device or another manufacturer. Using any other power cable or power supply may cause damage to the device and void your warranty.

CAUTION concerning the Power Cord

Most appliances recommend they be placed upon a dedicated circuit;

That is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specication page of this owner’s manual to be certain. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or re. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized service center. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. To disconnect power from the mains, pull out the mains cord plug. When installing the product, ensure that the plug is easily accessible.

Getting Started 3

CAUTION:

yThe apparatus should not be exposed to water

(dripping or splashing) and no objects lled with liquids, such as vases, should be placed on the apparatus.

yNo naked ame sources, such as lighted candles,

should be placed on the apparatus.

yTo avoid re or electric shock, do not open the

unit. Contact to qualied personnel only.

yDo not leave the unit in a place near the heating

appliances or subject to direct sunlight, moisture, or mechanical shock.

yTo clean the unit, use a soft, dry cloth. If the

surfaces are extremely dirty, use a soft cloth lightly moistened with a mild detergent solution. Do not use strong solvents such as alcohol, benzine, or thinner, as these might damage the surface of the unit.

yDo not use volatile liquids such as insecticide

spray near the unit. Wiping with strong pressure may damage the surface. Do not leave rubber or plastic products in contact with the unit for a long period of time.

yDo not place the unit over the vehicle’s air bag.

When the air bag deploys, it may result in injury. Before using in the car, x the unit.

yDo not leave the unit on an unstable place such

as high shelves. It may fall down because of the vibration of the sound.

Disposal of your old appliance

1. This crossed-out wheeled bin symbol indicates that waste electrical and electronic products (WEEE) should be disposed of separately from the municipal waste stream.

2. Old electrical products can contain hazardous substances so correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health. Your old appliance may contain reusable parts that could be used to repair other products, and other valuable materials that can be recycled to conserve limited resources.

3. You can take your appliance either to the shop where you purchased the product, or contact your local government waste office for details of your nearest authorised WEEE collection point. For the most up to date information for your country please see www.lg.com/global/ recycling

Getting Started

Getting Started4

Declaration of Conformity

Hereby, LG Electronics European Shared Service

Center B.V., declares that this Wireless Multi-room

Getting Started

Audio is compliant with the essential requirements and other relevant provisions of Directive 1999/5/ EC. The complete Declaration of Conformity may be requested through the following postal address:

LG Electronics European Shared Service Center B.V.

or can be requested at our dedicated DoC website: http://www.lg.com/global/support/cedoc/cedoc#

This device is a 2.4 GHz and 5 GHz wideband transmission system, intended for use in all EU member states and EFTA countries, with indoor use restriction for 5 GHz band. (5150 – 5250 MHz) This device should be installed and operated with minimum distance 20 cm between the device and your body. And this phrase is for the general statement for consideration of user environment.

European Standard Team

Krijgsman 1

1186 DM Amstelveen

The Netherlands

Table of Contents 5

Table of Contents

1 Getting Started

2 Safety Information 7 Main Features 7 Accessories 7 Introduction 8 Top Panel 9 Rear Panel

2 Connecting

10 Connecting the AC Adapter 11 Initial Multi-Room Setup 11 – Wired connection (MUSICflow Mesh

Network Connection)

11 – Wireless connection (Standard

Wireless Connection) 12 Installing “Music Flow Player” App 13 – Starting with Music Flow Player app 14 – Simple Connection (EZ Setup) 15 Using Media Server for PC 15 – Music Flow PC Software for windows 16 – Nero MediaHome 4 Essentials for

Mac OS 17 Connecting the speaker to your Home

Network

17 – Connecting the speaker to your

network with a LAN cable 20 – Connecting the speaker to your

Network via the Wi-Fi Setup Method

(Android) 23 – Connecting the speaker to your

Network via the Wi-Fi Setup Method

(iOS) 27 Connecting the speakers to your Home

Network (Additional)

27 – Connecting the additional speaker to

your network with a LAN cable 29 – Connecting the additional speaker

to your network via the Wi-Fi Setup

Method (Android) 31 Using the Bridge

31 – Use as a root device

(wired to the home router) 33 – Use as a wireless extender 35 Basic Operations 35 – Using 1/!/F button 35 – Using volume button

3 Operating

36 Enjoying the Music with Music Flow Player

app 36 – Overview of Home menu 37 – Overview of the side menu 38 – Playing a song 39 – Overview of Playback 41 – Group Playback 42 – Seamless playback 44 Using LG HomeChat 44 – About LG HomeChat 44 – How to start LG HomeChat 46 – Usage Examples 47 Setting the Speaker with Music Flow

Player app 47 – Overview of setting menu 48 – [General] Menu 48 – [Speakers] Menu 49 – [Alarms/Sleep Timer] Menu 49 – [Music Library] Menu 49 – [Account management] Menu 49 – [Time Zone] Menu 50 – [Advanced Settings] Menu 52 – [Google Cast] Menu 52 – [Version Info.] Menu 52 – [Open source licenses] Menu 53 Using a Bluetooth Wireless Technology 53 – About Bluetooth 53 – Bluetooth profiles 53 – Listening to Music of a Bluetooth

Device

54 – NFC for Easy Pairing

(Android Only)

55 Listening to Music from Your External

Device 55 Standby mode 55 – Standby mode 55 – Network standby mode

Table of Contents6

56 Reset the Speaker 56 – Resetting the speaker 56 – Resetting the Music Flow R1

4 Troubleshooting

57 Troubleshooting 57 – General 58 – Network 59 – Application and PC Software

5 Appendix

60 File requirement 60 Trademarks and Licenses 61 About Status LED’s Condition 62 Specifications 63 Handling the Speaker 63 Important Information Relating to

Network Services

64 TERMS OF USE

Some of the content in this manual may dier from Music Flow Player app depending on the application’s version.

Getting Started 7

Main Features

Made for iPod/iPhone/iPad or Android device

Enjoys music from iPod/iPhone/iPad or Android device with simple connection.

Portable In

Listens to music from your portable device.

Music Flow Player application

Listens to music stored on your smart device.

You can control this speaker with your iPod touch/ iPhone/iPad or Android device via Music Flow Player app. This speaker and your smart device must be connected to the same network. Visit “iTunes store” or “Google Play Store” or use the QR code shown below to search for “Music Flow Player” app. For detailed information, refer to page 12.

(Android OS)

yDepending on the application’s version and the

settings of smart device, Music Flow Player app may not be operated normally.

ySome smart devices may not be compatible with

this speaker.

(Apple iOS)

Accessories

Please check and identify the supplied accessories.

AC adapter (1) Power cord (1)

Introduction

Symbol used in this manual

Note

Indicates special notes and operating features.

Caution

Indicates cautions for preventing possible damages from abuse.

Getting Started

Top Panel

Getting Started

Getting Started8

a 1/!/

- Power On / Changing the mode

- Switching to the standby mode (page 35)

Volume wheel

Turn the wheel clockwise to increase volume, or counterclockwise to decrease volume.

button

Bluetooth status LED (page 61)

Portable In status LED (page 61)

Network status LED (page 61)

NFC Tag (page 54)

Speaker

Rear Panel

Getting Started 9

Getting Started

Speaker duct

A hole for plentiful bass sound on speaker

cabinet.

Wi-Fi SETUP button

Connects initial MUSICow product to your network wirelessly. (page 20)

ADD button

Adds additional MUSICow products to your network. (In case one or more MUSICow products are connected) (page 27)

DC IN (AC adapter input)

PORTABLE IN

Listens to music from your portable device.

ETHERNET

Connects the speaker to your network using a LAN cable.

Connecting10

Connecting the AC Adapter

Connect the speaker to the power supply with the supplied AC adapter.

1. Connect the supplied AC power cord to the AC adapter.

2. Connect the AC adapter cable to DC. IN adapter

Connecting

input.

3. Plug the AC power cord into an AC outlet.

AC Adapter

AC power cord

Caution

Only use the AC adapter supplied with this device. Do not use a power supply from another device or manufacturer. Using any other power cable or power supply may cause damage to the device and void your warranty.

Connecting 11

Initial Multi-Room Setup

When installing the MUSICow product for the rst time, you can choose two types of connection as below.

Wired connection (MUSICflow Mesh Network Connection)

Connect your speaker to the home router using LAN cable.

Then you can connect the additional MUSICow products (Optional) to your home network wirelessly. Refer to “Connecting the speakers to your Home Network (Additional)” on page 27.

LAN Cable

Wireless connection (Standard Wireless Connection)

When the wired connection is unavailable between your speaker and home router, this unit oers music streaming service within home router’s Wi-Fi coverage.

Connect one of the your speaker to the home router wirelessly.

Then you can connect the additional MUSICow products (Optional) to your home network wirelessly. Refer to “Connecting the speakers to your Home Network (Additional)” on page 27.

Wireless signal

Connecting

Connecting12

Installing “Music Flow Player” App

Through “iTunes store” or “Google Play Store”

1. Tap the “iTunes store” icon or “Google Play Store”

Connecting

icon.

2. Type in “Music Flow Player” in the search bar and tap “Search”.

3. Select “Music Flow Player” in the search result list to download.

Note

yMusic Flow Player app will be available in

version of the software as follow; Android O/S : Ver 4.0 (or later) iOS O/S : Ver 6.0 (or later)

yDepending on the device, “Music Flow

Player” app may not work.

Through QR code

Install “Music Flow Player” app through QR code. Scan the QR code using the scanning application.

(Android OS)

Note

yMake sure that your smart device is

connected to the internet.

Make sure that your smart device has a

scanning application. If you don’t have, download it from “iTunes store” or “Google Play Store”.

(Apple iOS)

Connecting 13

Starting with Music Flow Player app

When you launch Music Flow Player app for the rst time, the terms of use and Google Cast Service appear on the screen.

1. Check the contents of terms of use and select [Accept].

2. Check the contents of Google Cast Service and select [Accept].

3. Select [Connect product] to install the speaker you’ve purchased.

Refer to “Connecting the speaker to your Home

Network” on page 17.

Note

If you want to return to the terms of use screen, initialize the Music Flow Player app on the smart device’s setting menu.

Connecting

Connecting14

Simple Connection (EZ Setup)

Preparation

yFor Simple Connection, Wi-Fi network condition

is needed.

yMake sure that the Bluetooth setting on your

smart device in on.

Note

Connecting

ySimple Connection is supported by

Bluetooth Ver 4.0 (or higher).

yIf Simple Connection screen is not displayed

on the screen, refer to “Connecting the speaker to your Home Network” on page 17.

1. Plug in the desired device, and tap [Next].

3. If the network password is set, security screen is displayed. Type the password.

4. After typing password, tap [Next].

5. Tap [Finish] to finish making the connection.

2. App searches for the speaker and connects it automatically, Tap [Next].

Using Media Server for PC

Media server Software allows users to access audio files stored in media server and enjoy them on this speaker via home networking.

Before connecting to PC to play a le, Media server Software should be installed on your PC.

Note

Make sure that wireless network environment using a router is installed at your home.

yWindows : Music Flow PC Software

yMac OS : Nero MediaHome 4 Essentials

Music Flow PC Software for windows

About Music Flow PC Software

Music Flow PC Software makes you enjoy the audio les stored on your media server (PC) via the speaker.

Downloading Music Flow PC Software

1. Start up your computer, visit http://www.lg.com. If necessary, select your region.

2. Click support tab.

3. Fill your model name on the cover of owner’s manual in search bar.

4. Find and download the “Music Flow PC Software” file.

Installing Music Flow PC Software

1. Before installation, close all running programs including firewall and Anti-Virus programs.

2. Unzip and double-click “Setup.exe” to install Music Flow PC Software. The installation is prepared and the installation wizard appears.

3. Follow the directions of the installation wizard displayed on the screen.

4. Click the [Exit] button to complete the installation.

Connecting 15

Note

yMusic Flow PC Software is not supported

with Mac OS. In case of Mac OS, you can use the Nero MediaHome.

yThe Music Flow PC Software is a customized

software edition only for sharing les and folders to this speaker.

yIf you want a full explanation about Music

Flow PC Software, click the question marked icon on home menu.

System requirements (Windows PC)

yCPU : Intel® 2.0 GHz or AMD Sempron™ 2000+

processors

yMemory : 1 GB of free RAM

yGraphics card : 64 MB video memory, minimum

resolution of 1024 x 768 pixels, and 16 bit color settings

yFree Disk Space : 200 MB

yWindows® XP (Service Pack 2 or higher), Windows

Vista®, Windows® 7, Windows® 8.0, Windows® 8.1

yWindows® Media Player® 11.0 or higher

yNetwork environment: 100 MB Ethernet, WLAN

Sharing music files

On your computer, you must share the folder contained music les to play them on this speaker.

This parts explains the procedure for selecting the shared folders on your computer.

1. Double-click the “Music Flow PC Software” icon.

2. Click [ ] icon in the upper-right-hand corner of the screen. The setting menu appears.

3. On the setting menu, click [ ] icon on the left to go to the sharing le menu.

4. On the sharing le menu, Click [ ] icon to open the [Browse Folder] window.

5. Select the folder containing the les you want to share. The selected folder is added to the list of shared folders.

Connecting

Connecting16

Nero MediaHome 4 Essentials for Mac OS

About Nero MediaHome Essentials

Nero MediaHome 4 Essentials is a software for sharing video, audio and photo les stored on your computer to this speaker as a digital media server.

Downloading Nero MediaHome

Essentials

Connecting

1. Start up your computer, visit http://www.lg.com. If necessary, select your region.

2. Click support tab.

3. Fill your model name on the cover of owner’s manual in search bar.

4. Find and download the “Nero MediaHome 4 Essentials” file.

Installing Nero MediaHome Essentials

1. Before installation, close all running programs including firewall and Anti-Virus programs.

2. Unzip and double-click NeroMediaHome. dmg file, In the Nero MediaHome window, drag the Nero MediaHome icon either to the Applications folder within the window or to any other desired location.

3. Follow the directions of the installation wizard displayed on the screen.

4. Click the [Exit] button to complete the installation.

System requirements (Macintosh)

yMac OS X 10.5 (Leopard) or 10.6 (Snow Leopard)

yMacintosh computer with an Intel x86 processor

yHard drive space: 200 MB hard drive space

for a typical installation of Nero MediaHome standalone

yMemory: 256 MB RAM

Sharing music files

On your computer, you must share the folder contained music les to play them on this speaker.

This parts explains the procedure for selecting the shared folders on your computer.

1. Double-click the “Nero MediaHome 4 Essentials” icon.

2. Click [Network] icon on the left and dene your network name in the [Network name] eld. The Network name you enter will be recognized by your player.

3. Click [Shares] icon on the left.

4. Click [Local Folders] tab on the [Shares] screen.

5. Click [Add] icon to open the [Browse Folder] window.

6. Select the folder containing the les you want to share. The selected folder is added to the list of shared folders.

7. Click [Start Server] icon to start the server.

Connecting 17

Connecting the speaker to your Home Network

Using a wired network provides the best performance, because the attached devices connect directly to the network without radio frequency interference.

Please refer to the documentation for your network device for further instructions.

Preparation

yMake sure that wireless network environment

using a router is installed at your home.

yMake sure that the speaker and the smart device

are connected to the same router.

Requirements

yWireless router ySmart device (Android or iOS)

Note

yMake sure that DHCP’s server is activated on

wireless router.

yIf you cannot connect the speaker with your

router, go to setting of the router and then make sure that “Allow wireless client to see each other and access my local network” box is unchecked.

Connecting the speaker to your network with a LAN cable

Connection overview

Broadband service

Connecting

Router

LAN

Rear of the speaker

Connecting18

1. Plug the speaker into an electrical outlet. The

Network status LED starts to blink white.

2. On your smart device, launch Music Flow Player app. Select [Connect product] to install the speaker.

Connecting

3. Select the product you want to connect and tap [Next] on the screen.

5. Connect one end of the LAN cable to the speaker’s ETHERNET port and connect the other end to your wireless router. Wait a moment until Network status LED stops blinking and stays white.

6. Then select [Next] on the screen.

4. Select [Wired connection] on the screen.

Connecting 19

7. Select [Finish] to complete the connection.

(If there is an update)

8. This application is checking the Version of software of your speaker and then shows the version.

Note

yYou cannot use the speaker without a

router. When using the wired router, you can control the speaker with Music Flow PC Software. (page 15)

yThe speaker and the smart device should be

connected to the same router.

Connecting

Select [Next] after checking the version

information.

9. Select [Start] to curate your music on your smart device.

Connecting20

Connecting the speaker to your Network via the Wi-Fi Setup Method (Android)

Connection overview

Connecting

1. Plug the speaker into an electrical outlet. The

Network status LED starts to blink white.

2. On your smart device, launch Music Flow Player app. Select [Connect product] to install the speaker.

Broadband service

Router

3. Select the product you want to connect and tap [Next] on the screen.

Rear of the speaker

4. Select [Wireless connection] on the screen.

5. Then select [Next] on the screen.

Connecting 21

6. Press the Wi-Fi SETUP button on the rear of

the speaker. Then Network status LED blinks white and red alternately.

7. Then select [Next] on the screen.

8. If you have a password for your network, the security screen appears on your smart device. Enter your password.

9. Then select [Next] on the screen.

Connecting

10. Select [Finish] to complete the connection.

+ 47 hidden pages