LG NP8350B User Guide

SMART Hi-Fi AUDIO

Wireless Multi-room

Model : NP8350 / NP8350W

NP8350B / NP8350D

ENGLISH | SIMPLE MANUAL

The actual product may dier from the image.

ENG

FRE

1 Getting Started

Getting Started

2

Safety Information

1

Getting Started

CAUTION: TO REDUCE THE RISK OF ELEC TRIC SHOCK DO NOT REMOVE

COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING

WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT
EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

CAUTION: The apparatus shall not be exposed to water (dripping or
splashing) and no objects lled with liquids, such as vases, shall be placed
on the apparatus.

WARNING: Do not install this equipment in a conned space such as a
book case or similar unit.

CAUTION: Do not use high voltage products around this product. (ex.
Electrical swatter) This product may malfunction due to electrical shock.

CAUTION: Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions.
Slots and openings in the cabinet are provided for ventilation and to
ensure reliable operation of the product and to protect it from over
heating. The openings shall be never be blocked by placing the product
on a bed, sofa, rug or other similar surface. This product shall not be
placed in a built-in installation such as a bookcase or rack unless proper
ventilation is provided or the manufacturer’s instruction has been
adhered to.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

TO QUALIFIED SERVICE PERSONNEL.

This lightning ash with arrowhead symbol within
an equilateral triangle is intended to alert the user
to the presence of uninsulated dangerous voltage
within the product’s enclosure that may be of
sucient magnitude to constitute a risk of electric
shock to persons.

The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
product.

Getting Started

NOTICE: For safety marking information including product identication
and supply ratings, please refer to the main label on the bottom or rear of
the apparatus.

CAUTION : Only use the AC adapter supplied with this device. Do not
use a power supply from another device or another manufacturer. Using
any other power cable or power supply may cause damage to the device
and void your warranty. If you do not use supplied adapter, charging is
unavailable or charging time may dier.

CAUTION concerning the Power Cord

Most appliances recommend they be placed upon a dedicated circuit;

That is, a single outlet circuit which powers only that appliance and
has no additional outlets or branch circuits. Check the specication
page of this owner’s manual to be certain. Do not overload wall outlets.
Overloaded wall outlets, loose or damaged wall outlets, extension
cords, frayed power cords, or damaged or cracked wire insulation are
dangerous. Any of these conditions could result in electric shock or re.
Periodically examine the cord of your appliance, and if its appearance
indicates damage or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an exact replacement part
by an authorized service center. Protect the power cord from physical
or mechanical abuse, such as being twisted, kinked, pinched, closed in
a door, or walked upon. Pay particular attention to plugs, wall outlets,
and the point where the cord exits the appliance. The Power Plug is the
disconnecting device. In case of an emergency, the Power Plug must
remain readily accessible.

This device is equipped with a portable battery or accumulator.

Safety way to remove the battery or the battery from the
equipment: Remove the old battery or battery pack, follow the steps

in reverse order than the assembly. To prevent contamination of the
environment and bring on possible threat to human and animal health,
the old battery or the battery put it in the appropriate container at
designated collection points. Do not dispose of batteries or battery
together with other waste. It is recommended that you use local, free
reimbursement systems batteries and accumulators. The battery should
not be exposed to excessive heat such as sunshine, re or the like.

CAUTION when using this product in environments of low humidity

yIt may cause static electricity in environments of low humidity.
yIt is recommended to use this product after touching any metal object

which conducts electricity.

3

1

Getting Started

Getting Started

4

WARNING: This unit contains magnets which can be harmful to some
kind of object ( Ex : Magnetic card, Pacemaker etc..).

Industry Canada Statement:

1

This device complies with RSS-210 of the Industry Canada
Rules. Operation is subject to the following two conditions:

Getting Started

1) this device may not cause interference and

2) this device must accept any interference, including
interference that may cause undesired operation of the
device

This class B digital apparatus complies with Canadian ICES­003

CAN ICES-3 (B)/NMB-3(B)
IC Radiation Exposure Statement:

This equipment complies with IC radiation exposure limits
set forth for an uncontrolled environment.

NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY
RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED
MODIFICATIONS TO THIS EQUIPMENT. SUCH
MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO
OPERATE THE EQUIPMENT.

WARNING:

i. the device for operation in the band 5150–5250 MHz is

only for indoor use to reduce the potential for harmful
interference to co-channel mobile satellite systems;

ii. the maximum antenna gain permitted for devices in

the bands 5250–5350 MHz and 5470–5725 MHz shall
comply with the e.i.r.p. limit; and

iii. the maximum antenna gain permitted for devices in

the band 5725–5825 MHz shall comply with the e.i.r.p.
limits specied for point-to-point and non point-to­point operation as appropriate.

iv. High-power radars are allocated as primary users

(i.e. priority users) of the bands 5250–5350 MHz and
5650–5850 MHz and that these radars could cause
interference and/or damage to LE-LAN devices.

Getting Started

IMPORTANT SAFETY
INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other.
A grounding type plug has two blades and a third grounding prong.
The wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly
at plugs, convenience receptacles, and the point where they exit
from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to
avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or
when unused for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power­supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to

rain or moisture, does not operate normally, or has been dropped.

5

1

Getting Started

Table of Contents

6

Table of Contents

1 Getting Started

2 Safety Information
5 – IMPORTANT SAFETY INSTRUCTIONS
8 Unpacking
8 Product Overview
9 Charging the Unit
9 Basic Operations
9 – Using 1/! button
9 – Changing the mode

2 Using Multi-Room

10 Multi-Room Network Setup
10 – Step 1. Home Network Requirement
11 – Step 2. Installing “Music Flow Player” App and Media

Server
13 – Step 3. Initial Multi-Room Setup
16 – Step 4. Adding Speakers (Optional)
18 – Using the Bridge
19 Enjoying Multiple MUSICow Product
19 – 1. Home Cinema Mode
20 – 2. Grouping Mode
20 – 3. L/R Stereo Mode

Table of Contents

7

3 Using External Device

21 Using External device
21 – 1. PORTABLE IN connection
21 – 2. BLUETOOTH® connection

4 Troubleshooting

22 Troubleshooting

5 Appendix

27 About Status LED’s Condition
28 About Ferrite Core (Optional)
28 – How to attach the ferrite core
29 Specication
30 Open source software notice

yTo view the instructions of advanced features, visit

http://www.lg.com and then download Owner’s
Manual. Some of the content in this manual may dier
from your unit.

yDepending on the region, Music Flow Player application

and series of MUSICow product, some of the content
in this manual may dier.

1

2

3

4

5

Getting Started

8

Unpacking

1

Getting Started

Unit

AC Adapter

Product Overview

(Standby/On)

a 1/!

F (Function): Selects the function and input source.

b

-/+ (Volume)

c

(Play/Pause): Starts playback or pauses playback.

d

Speaker

e

(Wi-Fi): Connects initial MUSICflow product to your

f

network wirelessly.

(Add): Adds the additional MUSICflow product to your

g

network. (In case that one or more MUSICflow product is
connected)

(Portable Input): Connects the external device.

h

DC IN 12 V: Connects the supplied AC adapter.

i

Simple
manual

Charging the Unit

This unit uses built-in battery.
Before using it, charge the
battery by connecting the AC
Adapter.

Getting Started

9

1

Getting Started

Checking the charging

1/!

Approx.
3 hours

status

Charging :

button turns red.

1/!

Fully charged :

button turns white.

1/!

Note

,

How to check the battery life:

when the unit is turned on, press the

(White) : More than 60 %

1/!

(Amber) : More than 15 %

1/!

(Amber Blinking) : Less than 15 %

1/!

Basic Operations

Note

1/!

1/!

button

1/!

Using

On : Press
Off : Press and hold

Changing the mode

Press F (Function) button repeatedly. Then the mode is changed.

(Wi-Fi à Bluetooth à Wi-Fi)

,

When you connect the portable cable, the function is changed
as below. (Wi-Fi à Bluetooth à Portable In à Wi-Fi)

2 Using Multi-Room

Using Multi-Room

10

Multi-Room Network Setup

Step 1. Home Network Requirement

d

a

c

2

Using Multi-Room

Make sure that wireless network environment using a

a

router is installed at your home. The home router should be
connected to the internet.

Connect your smart device to your home network.

b

Connect the speaker to the power supply.

c

If you want to enjoy the music on media server (PC, Mac or

d

Network Storage), connect the media server to your home
network.

Caution for Home Network Requirement

.

yMUSICow system communicates over both 2.4 GHz and

5 GHz home network supporting 802.11b/g/n wireless
technology.

yWireless signal interference may lead to disconnection of

network or stopping playback.

yDepending on the speed of your network, playback of online

contents may not work well.

yNetwork connection may not be made with some routers

(or modem) from certain internet communication service
providers. In such case, purchase a router from general
market and use.

yBecause of a rewall on your PC, Music Flow PC Software may

not work well. In this case, disable all your rewalls and try to
connect again. Refer to your rewall’s instruction or website.

b

Using Multi-Room

Step 2. Installing “Music Flow Player”
App and Media Server

Installing “Music Flow Player” App

Download “Music Flow Player” on the App store or Google Play
Store.

A B

OR

A

Type “Music Flow Player” in the search bar and tap “Search”.

B

Scan the QR code using the scanning application.

Note for “Music Flow Player” App

,

yDepending on the device, “Music Flow Player” app may not

work.

yMusic Flow Player app will be available in version of the

software as follow;
Android O/S : Ver 4.0 (or later)
iOS O/S : Ver 6.0 (or later)

11

2

Using Multi-Room

Using Multi-Room

12

Installing Media Server software on your PC or
Mac

Media server software allows you to access audio les stored in
media server (PC, Mac or Network storage) and enjoy them on
your speaker via home networking. On www.lg.com website,
type model name in the search bar and nd media server
software on support tab.

yWindows : Music Flow PC Software

2

Using Multi-Room

yMac OS : Nero MediaHome 4 Essentials

Note for using Media Server

,

yOn your PC or Mac, you must share the folder contained

Audio content to play them on MUSICow system.

yOn your NAS Device, you must also need to change the

settings of your NAS device to ensure that DLNA server is
enabled.

yOn your Firewall software, you may also need to change the

settings of your rewall software to ensure that Windows le
sharing is not blocked.

Using Multi-Room

Step 3. Initial Multi-Room Setup

Wireless connection
(Standard Wireless Connection)

MUSICow product oers music streaming service within home
router’s Wi-Fi coverage.

Connect the one of MUSICow products (sound bar, speaker or
bridge) to the home router wirelessly.

(Option)
Then you can connect the additional MUSICow products to
your home Wi-Fi network wirelessly.
Refer to “Step 4. Adding Speakers (Optional)” on page 16.

Wireless signal

13

2

Using Multi-Room

Using Multi-Room

14

Simple Setup Guide (Wireless Connection)

1. Ensure your smart device is connected to your Wi-Fi

network.

2. Select the product you want to connect.

3. Launch Music Flow Player App and follow “Wireless

Connection” instructions on set-up wizard.

4. Press

2

Using Multi-Room

5. Check if the F (Function) indicator LED is blinking in a white

6. Please input the password of Home Router for connecting

If you have iOS device, you must take the three steps
below

6-1. Press home button of iOS device and go to [Settings].

6-2. Move to Music Flow Player App and input the password of

6-3. Press home button of iOS device and go to [Settings].

7. If you installed successfully. Update speaker software to the

button on the MUSICflow product (sound bar,

speaker or bridge).

and red color.

MUSICflow product to home router.

If you can select “MusicFlow_Setup” in Wi-Fi settings. The
App and MUSICflow product will be connected.

home router for connecting MUSICflow product to home
router.

Reconnect to your Home Wi-Fi network. And move to
Music Flow Player App again.

latest:
[Home à Settings à Version Info]

Using Multi-Room

Note

,

If you failed for “Wireless connection” conguration. It seems
that location is too far from the router, it may not be connected.
Place and use it at a location that is close enough to router.

m Tip

Oers music streaming service in MUSICow system within
home router’s Wi-Fi coverage.

In the below case, Standard wireless connection is
recommended.

1. When all speakers are within the home router’s Wi-Fi
coverage.
(your home router supports 802.11n 2.4/5 GHz )

2. When you want to use in below mode.

1) when you use single speaker MUSICflow system.

2) Group-play in the Wi-Fi coverage of the home router

3) L/R stereo Mode.

15

2

Using Multi-Room

Using Multi-Room

16

Step 4. Adding Speakers (Optional)

If you connect the initial MUSICow product to your home
network, you can connect the additional MUSICow products
(sound bar, speaker or bridge) to your home network.

2

Using Multi-Room

Simple Setup Guide (Add Speakers)

1. If you have additional speakers, power on the speaker.

2. Launch smart device or PC application and follow
instructions on set-up wizard.
[Home à Add Speakers]

3. Press

4. Check if F (Function) LED is blinking in a red color.

5. If you installed successfully. Update speaker software to the

Note

,

If you failed for “Add Speaker” conguration. It seems that
location is too far from between speakers, it may not be
connected. Place and use it at a location that is close enough to
router and each speakers.

button on the MUSICflow product (sound bar,

speaker or bridge) which is you want to connect.

latest:
[Home à Settings à Version Info]

Using Multi-Room

Note for Multi-Room Setup

,

yYou can make all wireless/wired connection according to the

location of the router. But we recommend that you connect
the bridge to the router using LAN cable and connect
additional speakers for network stability.

yWhen the “Firmware update” pop-up appears on Music Flow

Player App, touch to start updating.

yIf you connected a speaker with a LAN cable and installed

other speakers additionally: If the speaker with frequent
sound breaking is not close enough with the cable connected
speaker, additionally install Bridge or other speaker in the
middle location between the speaker connected with LAN
cable and the speaker with sound breaking, and try again.

yEven if you connected speakers with MUSICow mesh

network, music sound breaks by ambient signal interference
causing Wi-Fi network defect. In this case, you can try to
change Mesh network channel of MUSICow system at the
[Settings à Advanced settings à Mesh Network Channel].

yWhen making connection, “Mesh network composition” may

appear and it takes about 30 seconds. This message appears
once in rst installation but appear again when you change
network environment.

17

2

Using Multi-Room

Using Multi-Room

18

Using the Bridge

1. Use as a root device

(wired to the home router)

When your home router is located far from speaker location to
be connected in wired mode:

Connect the bridge to your home router with LAN cable.

a

2

According to “Simple Setup Guide (Add Speakers)“, add

b

Using Multi-Room

MUSICflow products to your home network.

a

2. Use as a wireless extender

When you want to expand MUSICow mesh network coverage:

Preparation: Initial MUSICow product is connected to your
home router with LAN cable.

According to “Simple Setup Guide (Add Speakers)“, add the

a

Bridge to your home network

According to “Simple Setup Guide (Add Speakers)“, add

b

MUSICflow products to your home network.

b

Bridge

b

a

Bridge

Using Multi-Room

Enjoying Multiple MUSICflow
Product

1. Home Cinema Mode

Simply add a LG MUSICow sound bar to your network and
synchronize it with your LG MUSICow speakers to enjoy a
home cinema system experience.

Note

,

If you connect the MUSICow Speakers to your Home Cinema,
those speakers must be same model.

Requirement

yMUSICow Sound Bar x 1

yMUSICow Speaker x 2 (Same model)

yNetwork Bridge (optional)

19

2

Using Multi-Room

Using Multi-Room

3 Using External Device

20

2. Grouping Mode

Speakers placed in separate rooms can play the same music or
dierent music based on your needs.
Synchronize your multi-room speakers together to play the
same song in every room.

2

Using Multi-Room

Requirement

yMore than 2 MUSICow

yNetwork Bridge (optional)

3. L/R Stereo Mode

Set your speakers to stereo sound with Music Flow Player Apps
to enjoy movies and your favourite tracks.

Requirement

yMUSICow Speaker x 2

yNetwork Bridge

(optional)

3 Using External Device

Using External device

1. PORTABLE IN connection

1. Connect any device which
has portable out (

(Portable Input)

the
connector of the unit by
using a 3.5 mm stereo
cable.

2. Select the input source of
this unit to portable input
using F (Function) button.

2. BLUETOOTH® connection

1. Press F (Function)
repeatedly to select
Bluetooth mode with
blue light on F (Function)
button.

2. On your Bluetooth
device, make sure that
Bluetooth is on and select
"LG Music Flow H4 (XX)"

3. Play music on your
Bluetooth device.

) to

Using External Device

21

3

Using External Device

4 Troubleshooting

Troubleshooting

22

Troubleshooting

Software Update

When the MUSICow product is connected to your home
network, check whether the rmware version is the latest on all
speakers and the Music Flow Player application.

MUSICow product might require recent rmware to be
installed for optimal operation.

[Settings à Version Info]: you can check if your speaker has the
latest rmware.

How can I initialize speaker?

If you press down (ADD) button until Beep sounds once,
the network related settings are initialized. (For sound bar,

4

“DISABLED” is displayed in the display window.)

Troubleshooting

If you press down
factory initialization is performed. (For sound bar “RESET” is
displayed in the display window.)

Speaker is not connected.

1. For speaker that is already connected, check if the phone is
connected to the same router as the speaker, then connect
to the same router, and check the followings.
1-1. Set Power off / on, and check the connection.

1-2. If it is not solved by 1-1, close the application and run

again.

1-3. If it is not solved by 1-2, reset the Speaker and

reconnect.

1-4. If it is not solved by 1-3, delete the App, reinstall, and

try again. To reset, press and hold the
for 8 seconds until you hear one beep.

(ADD) button until Beep sounds twice,

(ADD) button

Troubleshooting

2. If you change the location of the speaker that is in use,

2-1. If the changed location is too far from the home router,

it may not be connected. Place and use it at a location
that is close enough to router.

2-2. Connect the speaker with a LAN cable, and for

additionally installed speakers, if they are not close
enough to the speaker connected with a LAN cable,
additionally install Bridge or another speaker in the
middle location between the speaker connected
with LAN cable and the speaker with sound being
disconnected.

There are times that speaker disappears from
the application

1. If the speaker blinking lamp is not blinking, and stays
as white: Even after the speaker power off and on, if the
problem continues, in this case you have to reset the speaker
(To reset, press and hold the (ADD) button for 8 seconds
until you hear one beep.) and need to register again. Carry
out speaker installation or additional procedures.

2. If the speaker blinking lamp blinks white - network signal is
unstable. Wait for a while, or move the speaker to another
location closer to other speaker or router.

3. Press menu key or menu at the top right side of Home
screen to end Music Flow Player app and run again.

Music sound breaks and unstable MUSICflow
system

1. If speaker with breaking sound is connected through
wireless connection mode,

yIf the distance between speaker and home router is not

close enough, the corresponding condition may occur.
Move speaker closer to home router and try again.

23

4

Troubleshooting

Troubleshooting

24

y If the device with sound source to play (Ex. phone or

laptop) is at a place without uent home router signal,
move the corresponding device closer to the home
router and try again.

2. If you connected a speaker with a cable and installed other
speakers additionally:
If the speaker with frequent sound breaking is not close
enough with the cable connected speaker, additionally
install Bridge or other speaker in the middle location
between the cable connected speaker and the speaker with
sound breaking speaker, and try again.

3. Even if you connected speakers with MUSICflow mesh
network, music sound breaks by ambient signal interference
causing Wi-Fi network defect. In this case, you can try to
change Mesh network channel of MUSICflow system at the

4

[Settings à Advanced settings à Mesh Network Channel].

Troubleshooting

How can I compose Music Library? / Song is not
added even though library is updated.

Just by adding a song to DLNA server, Music Library is not
automatically updated. When you add a song to the server, in
[Settings à Music Library à Synchronization], run Music Library
synchronization again. Even after Music Library synchronization,
if song is not added, check the followings.

1. Check if DLNA server or PC SW shared folder is designated.

2. Check if DLNA server contents list is renewed.

yEven if you copy the le into the server, server contents

list may not be immediately renewed, so check the server
setting.

yIf you copy a song into the phone with a method other

than MTP, it may not be reected to the server contents
list. In such case, rescan the contents in the phone, or turn
o and start the phone again.

3. The sharing may be blocked, so check DLNA server program
setting or firewall setting.

Troubleshooting

yIf you are using LG Musicow PC software, when you

designate shared folder, the corresponding folder will be
automatically added to Music Library in a minute.

LG MUSICflow product is turned off
automatically.

There are some cases that power o will occur if not receiving
sound signal:

yBluetooth, Wi-Fi (DLNA) mode: if there is no sound signal

during 20 minutes.

yPortable-In : no sound signal during 6 hours.

-In case of Network connected, it will go to Network standby
mode (White LED)

-In case of Network disconnected, it will go to Standby mode
(Red LED)

What is the type of music file that can be
played?

yYou can play the les with extension mp3, wma, ac, m4a,

aac, ogg, and wav.

yFor mp3 and wma, sampling frequency is 32- 48 kHz, and for

ac, it supports up to 192 kHz, 24 bit.

yEven if the above conditions are satised, it may not be

played according to the characteristics of the le or media
server.

yDRM applied le cannot be played.

25

4

Troubleshooting

Troubleshooting

26

How can I use Spotify?

LG MUSICow product supports Spotify connect method
provided by Spotify. Through this, you can use the function
supported by Spotify by connecting to the speaker through
Spotify application. If Music Flow speaker is in the network
composed of the same router, Spotify application Speaker
shape Icon is changed, and when you press this Icon, you can
check and select the speakers in the same network. ( When the
speaker is selected, the icon changes to green.)

How can I use HomeChat?

After HomeChat device registration, you can use Home Chat.

Each of the family members can register and use one speaker in
HomeChat, and one person can register several speakers.

For details, refer to http://www.lghomechat.com.

4

Note

,

Troubleshooting

Depending on the region, some services (ex. Spotify, Homechat,
etc.) are unavailable.

What is Wi-Fi Disable mode?

This unit provides the wi- disable mode to save battery life. If
you do not use the Wi-Fi function, set it o.

Wi-Fi disable

Press and hold the
LED turns dimmed white.

Wi-Fi enable

Press the

button for 5 second. Then the F (Function)

or button.

5 Appendix

About Status LED’s Condition

Color Status

The unit is waiting for

(O ) (Blue)

(Blue)

Bluetooth pairing

Bluetooth connection is paired

Appendix

Bluetooth

mode

27

(White)

(O ) (White)

(White) (Red)

(White)

(O ) (Red)

(Red)

(Dimmed

(White)

(Dimmed

white)

white)

Portable cable is connected

The unit is waiting for network

connection

The initial unit is being

connected to the network

( button is pressed)

The unit is connected to the

network

The additional unit is being

connected to the network

( button is pressed)

Network standby mode

(Battery : Charging)

Network standby mode

(Battery : Full Charged)

Portable in

mode

Network

Status

Standby

Mode Status

5

Appendix

Appendix

28

Note for Status LED’s Condition

,

yWhen you set the group at rst, F (Function) LED turns green.

yThe additional groups are set, the F (Function) LED color is

changed in group order.
[Green > Magenta > Cyan > Blue > Yellow]

yIf the grouped speakers switch to the network standby mode,

the brightness of F (Function) LED gets dark.

About Ferrite Core (Optional)

This ferrite core can reduce or eliminate electrical interference.

How to attach the ferrite core

1. Pull the stopper [a] of the
ferrite core to open.

2. Wind the power cord twice

5

Appendix

on the ferrite core.

3. Close the ferrite core until
it clicks.

Appendix

Specification

Power supply:

-12 V 0 1.0 A (AC Adapter)

-Built-in rechargeable battery

Power consumption: 12 W

-Networked standby : 3.7 W
(If all network ports are activated.)

AC Adapter:

-Model: WA-12M12FU

-Manufacturer: Yang Ming Industrial

-Input: AC 100 - 120 V, 50/60 Hz

-Output: 12 V 0 1.0 A

Dimensions (W x H x D):
194 mm x 64 mm x 70 mm (without foot)

Bluetooth

Codec : SBC

Battery :

-Battery capacity : 2600 mAh

-Operating time is approx. 4 hours. (Wi-Fi O Status: 6 hours)
It may vary depending on the battery status and operational
conditions. (Based on 26 volume, 1kHz signal, 400 mV
portable input and fully charged status)

Net Weight (Approx.): 0.8 kg

yDesign and specications are subject to change without

notice.

29

5

Appendix

Appendix

30

Open source software notice

To obtain the source code under GPL, LGPL, MPL and other
open source licenses, that is contained in this product, please
visit http://opensource.lge.com.
In addition to the source code, all referred license terms,
warranty disclaimers and copyright notices are available for
download.
LG Electronics will also provide open source code to you on
CD-ROM for a charge covering the cost of performing such
distribution (such as the cost of media, shipping and handling)
upon email request to [e-mail]. This oer is valid
for three (3) years from the date on which you purchased the
product.

5

Appendix

LG Customer Information Center

1-888-542-2623 CANADA

Register your product Online!

www.lg.com

For more product details check the following webpage

Canada http://www.lg.com/ca_en/musicow