LG NP8350 Quick Guide
ENG
DEU
FRE
DUT
SLN
ITA
SPA
SMART Hi-Fi AUDIO
Wireless Multi-room
Model :
NP8350 / NP8350W
NP8350B / NP8350D
NA9350 / NA9350W
NA9350B / NA9350D
ENGLISH | SIMPLE MANUAL
The actual product may dier from the image.
GRE
POR
1 Getting Started
Getting Started
2
Safety Information
1
Getting Started
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE
COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT
EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
CAUTION: The apparatus shall not be exposed to water (dripping or
splashing) and no objects lled with liquids, such as vases, shall be placed
on the apparatus.
WARNING: Do not install this equipment in a conned space such as a
book case or similar unit.
CAUTION: Do not use high voltage products around this product. (ex.
Electrical swatter) This product may malfunction due to electrical shock.
CAUTION: Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions.
Slots and openings in the cabinet are provided for ventilation and to
ensure reliable operation of the product and to protect it from over
heating. The openings shall be never be blocked by placing the product
on a bed, sofa, rug or other similar surface. This product shall not be
placed in a built-in installation such as a bookcase or rack unless proper
ventilation is provided or the manufacturer’s instruction has been
adhered to.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
TO QUALIFIED SERVICE PERSONNEL.
This lightning ash with arrowhead symbol within
an equilateral triangle is intended to alert the user
to the presence of uninsulated dangerous voltage
within the product’s enclosure that may be of
sucient magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
product.
Getting Started
NOTICE: For safety marking information including product identication
and supply ratings, please refer to the main label on the bottom or rear of
the apparatus.
CAUTION : Only use the AC adapter supplied with this device. Do not
use a power supply from another device or another manufacturer. Using
any other power cable or power supply may cause damage to the device
and void your warranty. If you do not use supplied adapter, charging is
unavailable or charging time may dier.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon a dedicated circuit;
That is, a single outlet circuit which powers only that appliance and
has no additional outlets or branch circuits. Check the specication
page of this owner’s manual to be certain. Do not overload wall outlets.
Overloaded wall outlets, loose or damaged wall outlets, extension
cords, frayed power cords, or damaged or cracked wire insulation are
dangerous. Any of these conditions could result in electric shock or re.
Periodically examine the cord of your appliance, and if its appearance
indicates damage or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an exact replacement part
by an authorized service center. Protect the power cord from physical
or mechanical abuse, such as being twisted, kinked, pinched, closed in
a door, or walked upon. Pay particular attention to plugs, wall outlets,
and the point where the cord exits the appliance. The Power Plug is the
disconnecting device. In case of an emergency, the Power Plug must
remain readily accessible.
This device is equipped with a portable battery or accumulator.
Safety way to remove the battery or the battery from the
equipment: Remove the old battery or battery pack, follow the steps
in reverse order than the assembly. To prevent contamination of the
environment and bring on possible threat to human and animal health,
the old battery or the battery put it in the appropriate container at
designated collection points. Do not dispose of batteries or battery
together with other waste. It is recommended that you use local, free
reimbursement systems batteries and accumulators. The battery should
not be exposed to excessive heat such as sunshine, re or the like.
CAUTION when using this product in environments of low humidity
yIt may cause static electricity in environments of low humidity.
yIt is recommended to use this product after touching any metal object
which conducts electricity.
3
1
Getting Started
Getting Started
4
WARNING: This unit contains magnets which can be harmful to some
kind of object ( Ex : Magnetic card, Pacemaker etc..).
Disposal of your old appliance
1
Getting Started
1. All electrical and electronic products should be
disposed of separately from the municipal waste stream
via designated collection facilities appointed by the
government or the local authorities.
2. The correct disposal of your old appliance will help
prevent potential negative consequences for the
environment and human health.
3. For more detailed information about disposal of your
old appliance, please contact your city office, waste
disposal service or the shop where you purchased the
product.
Disposal of waste batteries/accumulators
1. This symbol may be combined with chemical symbols
for mercury(Hg), cadmium(Cd) or lead(Pb) if the battery
Contains more that 0.0005% of mercury,0.002% of
cadmium or 0.004% of lead.
2. All batteries/accumulators should be disposed
separately from the municipal waste stream via
designated collection facilities appointed by the
government or the local authorities.
3. The correct disposal of Your old batteries/accumulators
will help to prevent potential negative consequences for
the environment, animal and human health.
4. For more detailed information about disposal of Your old
Pb
batteries/accumulators, please contact Your city office,
waste disposal service or the shop where You purchased
the product.
Getting Started
Removal of waste batteries and accumulators
(Product with embedded battery ONLY)
In case this product contains a battery incorporated within the product
which cannot be readily removed by endusers, LG recommends that only
qualified professionals remove the battery, either for replacement or for
recycling at the end of this product’s working life. To prevent damage
to the product, and for their own safety, users should not attempt to
remove the battery and should contact LG Service Helpline, or other
independent service providers for advice. Removal of the battery will
involve dismantling of the product case, disconnection of the electrical
cables/
contacts, and careful extraction of the battery cell using specialized tools.
If you need the instructions for qualified professionals on how to remove
the battery safely, please visit http://www.lge.com/global/sustainability/
environment/take-back-recycling.
CAUTION: Internal lithium battery in the unit should not be replaced by
user because of danger of explosion if battery is incorrectly replaced ,and
must be replaced with the same type battery by expert.
Declaration of Conformity
Hereby, LG Electronics European Shared Service Center B.V., declares
that this Wireless Multi-room Audio is compliant with the essential
requirements and other relevant provisions of Directive 1999/5/EC. The
complete Declaration of Conformity may be requested through the
following postal address:
LG Electronics European Shared Service Center B.V.
European Standard Team
Krijgsman 1
1186 DM Amstelveen
The Netherlands
or can be requested at our dedicated DoC website:
http://www.lg.com/global/support/cedoc/cedoc#
5
1
Getting Started
This device is a 2.4 GHz and 5 GHz wideband transmission system,
intended for use in all EU member states and EFTA countries, with indoor
use restriction for 5 GHz band. (5150 – 5250 MHz)
This device should be installed and operated with minimum distance
20 cm between the device and your body. And this phrase is for the
general statement for consideration of user environment.
Table of Contents
6
Table of Contents
1 Getting Started
2 Safety Information
8 Unpacking
8 Product Overview
9 Charging the Unit
9 Basic Operations
9 – Using 1/! button
9 – Changing the mode
2 Using Multi-Room
10 Multi-Room Network Setup
10 – Step 1. Home Network Requirement
11 – Step 2. Installing “Music Flow Player” App and Media
Server
13 – Step 3. Initial Multi-Room Setup
16 – Step 4. Adding Speakers (Optional)
18 – Using the Bridge
19 Enjoying Multiple MUSICow Product
19 – 1. Home Cinema Mode
20 – 2. Grouping Mode
20 – 3. L/R Stereo Mode
Table of Contents
7
3 Using External Device
21 Using External device
21 – 1. PORTABLE IN connection
21 – 2. BLUETOOTH® connection
4 Troubleshooting
22 Troubleshooting
5 Appendix
27 About Status LED’s Condition
28 About Ferrite Core (Optional)
28 – How to attach the ferrite core
29 Specication
30 Open source software notice
yTo view the instructions of advanced features, visit
http://www.lg.com and then download Owner’s
Manual. Some of the content in this manual may dier
from your unit.
yDepending on the region, Music Flow Player application
and series of MUSICow product, some of the content
in this manual may dier.
1
2
3
4
5
Getting Started
8
Unpacking
1
Getting Started
Unit
AC Adapter
Product Overview
(Standby/On)
a 1/!
F (Function): Selects the function and input source.
b
-/+ (Volume)
c
(Play/Pause): Starts playback or pauses playback.
d
Speaker
e
(Wi-Fi): Connects initial MUSICflow product to your
f
network wirelessly.
(Add): Adds the additional MUSICflow product to your
g
network. (In case that one or more MUSICflow product is
connected)
(Portable Input): Connects the external device.
h
DC IN 12 V: Connects the supplied AC adapter.
i
Simple
manual
Charging the Unit
This unit uses built-in battery.
Before using it, charge the
battery by connecting the AC
Adapter.
Getting Started
9
1
Getting Started
Checking the charging
1/!
Approx.
3 hours
status
Charging :
button turns red.
1/!
Fully charged :
button turns white.
1/!
Note
,
How to check the battery life:
when the unit is turned on, press the
(White) : More than 60 %
1/!
(Amber) : More than 15 %
1/!
(Amber Blinking) : Less than 15 %
1/!
Basic Operations
Note
1/!
1/!
button
1/!
Using
On : Press
Off : Press and hold
Changing the mode
Press F (Function) button repeatedly. Then the mode is changed.
(Wi-Fi à Bluetooth à Wi-Fi)
,
When you connect the portable cable, the function is changed
as below. (Wi-Fi à Bluetooth à Portable In à Wi-Fi)
Loading...