LG NP8350 Owner’s Manual

SMART Hi-Fi AUDIO

Wireless Multi-room

Model : NP8350 / NP8350B

NP8350W / NP8350D NA9350

ENGLISH | OWNER’S MANUAL Please read this manual carefully before operating your speaker and retain it for future reference.

www.lg.com

Getting Started2

Safety Information

Getting Started

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK DO NOT REMOVE COVER (OR BACK) NO

USER-SERVICEABLE PARTS INSIDE REFER SERVICING

TO QUALIFIED SERVICE PERSONNEL.

enclosure that may be of sucient magnitude to constitute a risk of electric shock to persons.

in the literature accompanying the product.

WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

WARNING: Do not install this equipment in a conned space such as a book case or similar unit.

NOTICE: For safety marking information including product identication and supply ratings, please refer to the main label on the bottom or rear of the apparatus.

For models using an adapter

Only use the AC adapter supplied with this device. Do not use a power supply from another device or another manufacturer. Using any other power cable or power supply may cause damage to the device and void your warranty.

CAUTION concerning the Power Cord

The Power Plug is the disconnecting device. In case of an emergency, the Power Plug must remain readily accessible.

Check the specication page of this owner’s manual to be certain of the current requirements.

Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

This lightning ash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions

conditions could result in electric shock or re. Periodically examine the cord of your device, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the device, and have the cord replaced with an exact replacement part by an authorized service center. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the device.

CAUTION:

yThe apparatus should not be exposed to water

(dripping or splashing) and no objects lled with liquids, such as vases, should be placed on the apparatus.

yNo naked ame sources, such as lighted candles,

should be placed on the apparatus.

yTo avoid re or electric shock, do not open the

unit. Contact to qualied personnel only.

yDo not leave the unit in a place near the heating

appliances or subject to direct sunlight, moisture, or mechanical shock.

yTo clean the unit, use a soft, dry cloth. If the

surfaces are extremely dirty, use a soft cloth lightly moistened with a mild detergent solution. Do not use strong solvents such as alcohol, benzine, or thinner, as these might damage the surface of the unit.

yDo not use volatile liquids such as insecticide

spray near the unit. Wiping with strong pressure may damage the surface. Do not leave rubber or plastic products in contact with the unit for a long period of time.

yDo not place the unit over the vehicle’s air bag.

When the air bag deploys, it may result in injury. Before using in the car, x the unit.

yDo not leave the unit on an unstable place such

as high shelves. It may fall down because of the vibration of the sound.

Removal of waste batteries and accumulators

(Product with embedded battery ONLY)

In case this product contains a battery incorporated within the product which cannot be readily removed by endusers, LG recommends that only qualified professionals remove the battery, either for replacement or for recycling at the end of this product’s working life. To prevent damage to the product, and for their own safety, users should not attempt to remove the battery and should contact LG Service Helpline, or other independent service providers for advice. Removal of the battery will involve dismantling of the product case, disconnection of the electrical cables/ contacts, and careful extraction of the battery cell using specialized tools. If you need the instructions for qualified professionals on how to remove the battery safely, please visit http://www.lge.com/global/ sustainability/environment/take-back-recycling.

CAUTION: Internal lithium battery in the unit should not be replaced by user because of danger of explosion if battery is incorrectly replaced ,and must be replaced with the same type battery by expert.

This device is equipped with a portable battery or accumulator.

Safety way to remove the battery or the battery from the equipment: Remove the

old battery or battery pack, follow the steps in reverse order than the assembly. To prevent contamination of the environment and bring on possible threat to human and animal health, the old battery or the battery put it in the appropriate container at designated collection points. Do not dispose of batteries or battery together with other waste. It is recommended that you use local, free reimbursement systems batteries and accumulators. The battery should not be exposed to excessive heat such as sunshine, re or the like.

CAUTION when using this product in environments of low humidity

yIt may cause static electricity in environments of

low humidity.

yIt is recommended to use this product after

touching any metal object which conducts electricity.

Getting Started 3

Getting Started

Table of Contents4

Table of Contents

1 Getting Started

2 Safety Information 6 Main Features 6 Accessories 6 Introduction 7 Product Overview

2 Connecting

8 Charging the Unit 8 – Checking the charging status 8 Initial Multi-Room Setup 8 – Wireless connection

(Standard Wireless Connection) 9 Installing “Music Flow Player” App 10 – Starting with Music Flow Player app 11 Connecting the speaker to your Home

Network 11 – Simple Connection (EZ Setup) 12 – Connecting the speaker to your

Network via the Wi-Fi Setup Method (Android)

15 – Connecting the speaker to your

Network via the Wi-Fi Setup Method (iOS)

19 Connecting the speakers to your Home

Network (Additional) 19 – Connecting the additional speaker to

your network with a LAN cable

21 – Connecting the additional speaker

to your network via the Wi-Fi Setup

Method (Android) 23 Using the Bridge 23 – Use as a root device (wired to the

home router) 24 – Use as a wireless extender 26 Using Media Server for PC 26 – Music Flow PC Software for windows 27 – Nero MediaHome 4 Essentials for

Mac OS

3 Operating

28 Basic Operations 28 – Using 1/! button 28 Enjoying the Music with Music Flow Player

app 29 – Overview of Home menu 30 – Overview of the side menu 30 – Playing a song 32 – Overview of Playback 33 – Group Playback 35 – Seamless playback 36 Setting the Speaker with Music Flow

Player app 37 – Overview of setting menu 37 – [General] Menu 38 – [Speakers] Menu 38 – [Alarms/Sleep Timer] Menu 39 – [Account management] Menu 39 – [Time Zone] Menu 39 – [Advanced Settings] Menu 41 – [Chromecast] Menu 42 – [Version Info.] Menu 42 – [Open source licenses] Menu 42 Using a Bluetooth Wireless Technology 42 – About Bluetooth 42 – Bluetooth profiles 42 – Listening to Music of a Bluetooth

Device

44 Listening to Music from Your External

Device 44 Standby mode 44 – Standby mode 44 – Network standby mode 45 Reset the Speaker 45 – Resetting the speaker 45 – Resetting the Music Flow R1

4 Troubleshooting

46 Troubleshooting 46 – General 47 – Network 48 – Application and PC Software

5 Appendix

49 File requirement 49 Trademarks and Licenses 50 About Status LED’s Condition 51 Specifications 52 Handling the Speaker 52 Important Information Relating to

Network Services

53 TERMS OF USE

Table of Contents 5

Some of the content in this manual may dier from Music Flow Player app depending on the application’s version.

Getting Started6

Main Features

Made for iPod/iPhone/iPad or

Android device

Getting Started

Enjoys music from iPod/iPhone/iPad or Android device with simple connection.

Portable In

Listens to music from your portable device.

Music Flow Player application

Listens to music stored on your smart device.

You can control this speaker with your iPod touch/ iPhone/iPad or Android device via Music Flow Player app. This speaker and your smart device must be connected to the same network. Visit Apple “App Store” or Google “Play Store” or use the QR code shown below to search for “Music Flow Player” app. For detailed information, refer to page

(Android OS)

yDepending on the application’s version and the

settings of smart device, Music Flow Player app may not be operated normally.

ySome smart devices may not be compatible with

this speaker.

(Apple iOS)

Accessories

Please check and identify the supplied accessories.

AC adapter (1)

Introduction

Symbol used in this manual

Note

Indicates special notes and operating features.

Caution

Indicates cautions for preventing possible damages from abuse.

Product Overview

Getting Started 7

Getting Started

(Standby/On)

a 1/!

F (Function): Selects the function and input

source.

-/+ (Volume)

(Play/Pause) : Starts playback or pauses

playback.

Speaker

(Wi-Fi): Connects initial Music Flow product

to your network wirelessly. (page 12)

(Add): Adds additional Music Flow products

to your network. (In case one or more Music Flow products are connected)

(Portable Input): Connects the external

device.

DC IN 12V: Connects the supplied AC adapter.

Connecting8

Charging the Unit

This unit uses built-in battery. Before using it, charge the battery by connecting the AC Adapter.

Connecting

Caution

Only use the AC adapter supplied with this device. Do not use a power supply from another device or manufacturer. Using any other power cable or power supply may cause damage to the device and void your warranty.

Checking the charging status

Charging :

Fully charged :

button turns red.

1/!

button turns white.

Initial Multi-Room Setup

Wireless connection (Standard Wireless Connection)

Music Flow products oer music streaming service within home router’s Wi-Fi coverage.

Connect one of the your speaker to the home router wirelessly.

Then you can connect the additional Music Flow products (Optional) to your home network wirelessly. Refer to “Connecting the speakers to your Home Network (Additional)” on page 19.

Wireless signal

Note

How to check the battery life:

when the unit is turned on, press the

(White) : More than 60 %

1/!

(Amber) : More than 15 %

1/!

(Amber Blinking) : Less than 15 %

1/!

Connecting 9

Installing “Music Flow Player” App

Through Apple “App Store” or Google “Play Store”

1. Tap the Apple “App Store” icon or Google “Play Store” icon.

2. Type in “Music Flow Player” in the search bar and tap “Search”.

3. Select “Music Flow Player” in the search result list to download.

Note

yMusic Flow Player app will be available in

version of the software as follow; Android O/S : Ver 4.0 (or later) iOS O/S : Ver 6.0 (or later)

yDepending on the device, “Music Flow

Player” app may not work.

Through QR code

Install “Music Flow Player” app through QR code. Scan the QR code using the scanning application.

(Android OS)

Note

yMake sure that your smart device is

connected to the internet.

yMake sure that your smart device has a

scanning application. If you don’t have, download it from Apple “App Store” or Google “Play Store”.

(Apple iOS)

Connecting

Connecting10

Starting with Music Flow Player app

When you launch Music Flow Player app for the rst time, the terms of use and Chromecast Service appear on the screen.

1. Check the contents of terms of use and select [Accept].

Connecting

2. Check the contents of Chromecast Service and select [Accept].

3. Select [Connect product] to install the speaker you’ve purchased.

Refer to “Connecting the speaker to your Home

Network” on page 11.

Note

If you want to return to the terms of use screen, initialize the Music Flow Player app on the smart device’s setting menu.

Connecting 11

Connecting the speaker to your Home Network

Please refer to the documentation for your network device for further instructions.

Preparation

yMake sure that wireless network environment

using a router is installed at your home.

yMake sure that the speaker and the smart device

are connected to the same router.

Requirements

yWireless router ySmart device (Android or iOS)

Note

yMake sure that DHCP’s server is activated on

wireless router.

yIf you cannot connect the speaker with your

router, go to setting of the router and then make sure that “Allow wireless client to see each other and access my local network” box is unchecked.

Simple Connection (EZ Setup)

Preparation

yFor Simple Connection, Wi-Fi network condition

is needed.

yMake sure that the Bluetooth setting on your

smart device in on.

Note

ySimple Connection is supported by

Bluetooth Ver 4.0 (or higher).

yIf Simple Connection screen is not displayed

on the screen, connect the unit by the other way. Please refer to “Connecting the speaker to your Network via the Wi-Fi Setup Method” (page 12 or page 15)

1. Plug in the desired device, and tap [Next].

Connecting

2. App searches for the speaker and connects it automatically, Tap [Next].

Connecting12

3. If the network password is set, security screen is displayed. Type the password.

Connecting

4. After typing password, tap [Next].

5. Tap [Finish] to finish making the connection.

Connecting the speaker to your Network via the Wi-Fi Setup Method (Android)

Connection overview

Broadband service

Router

Connecting 13

1. Plug the speaker into an electrical outlet. The F (Function) LED starts to blink white.

2. On your smart device, launch Music Flow Player app. Select [Connect product] to install the speaker.

3. Select the product you want to connect and tap [Next] on the screen.

5. Then select [Next] on the screen.

Connecting

6. If you have a password for your network, the security screen appears on your smart device. Enter your password.

4. Press the button on the side of the speaker.

Then F (Function) LED blinks white and red alternately.

Connecting14

7. Then select [Next] on the screen.

Connecting

8. Select [Finish] to complete the connection.

(If there is an update)

9. This application is checking the Version of software of your speaker and then shows the version.

Select [Next] after checking the version

information.

Note

If the speaker fails to connect to your network or its network connection operates abnormally, place the speaker closer to your router and try again.

Connecting 15

Connecting the speaker to your Network via the Wi-Fi Setup Method (iOS)

Connection overview

Broadband service

Router

1. Plug the speaker into an electrical outlet. The F (Function) LED starts to blink white.

2. On your smart device, launch Music Flow Player app. Select [Connect product] to install the speaker.

Connecting

3. Select the product you want to connect and tap [Next] on the screen.

Connecting16

4. Press the button on the side of the speaker.

Then F (Function) LED blinks white and red alternately.

Connecting

5. Then select [Next] on the screen.

6. On your iOS device, go to iOS setting -> WiFi setting and select “MusicFlow_Setup” to connect.

Note

yIf “MusicFlow_Setup” is not on the list, scan

for available Wi-Fi networks again.

yWhen your smart device is connected to

“MusicFlow_Setup”, you cannot use the internet.

Connecting 17

7. If you have a password for your network, the security screen appears on your smart device. Enter your password.

8. Then select [Next] on the screen.

10. Select [Finish] to complete the connection.

Note

If the speaker fails to connect to your network or its network connection operates abnormally, place the speaker closer to your router and try again.

Connecting

9. Then select [Next] on the screen.

+ 39 hidden pages