LG Nite, MMBB0382401 User Manual

Nite

P/NO : MMBB0382401(1.1)

Copyright ©2010 LG Electronics, Inc. All rights reserved. LG and the LG logo are registered trademarks of LG Group and its related entities. All other trademarks are the property of their respective owners.

Important Safety Precautions

Read these instructions. Breaking the rules may be dangerous or illegal. Further detailed information is given in this user guide.

WARNING! Violation of the instructions may cause serious injury or death.

1. Never use an unapproved battery since this could damage the phone and/or battery and could cause the battery to explode.

2. Never place your phone in a microwave oven as it will cause the battery to explode.

3. Never store your phone in temperatures less than

-4°F or greater than 122°F.

4. Do not dispose of your battery by fire or with hazardous or flammable materials.

5. When riding in a car, do not leave your phone or set up the hands-free kit near to the air bag. If wireless equipment is improperly installed and the air bag is deployed, you may be seriously injured.

6. Do not use a hand-held phone while driving.

7. Do not use the phone in areas where its use is prohibited. (For example: aircraft)

Important Safety Precautions

1. Do not expose the battery charger or adapter to direct sunlight or use it in places with high humidity, such as a bathroom.

2. Do not use harsh chemicals (such as alcohol, benzene, thinners, etc.) or detergents to clean your phone. This

Important Safety Precautions

could cause a fire.

3. Do not drop, strike, or shake your phone severely. It may harm the internal circuit boards of the phone.

4. Do not use your phone in high explosive areas as the phone may generate sparks.

5. Do not damage the power cord by bending, twisting, pulling, or heating. Do not use the plug if it is loose as it may cause a fire or electric shock.

6. Do not place any heavy items on the power cord. Do not allow the power cord to be crimped as it may cause electric shock or fire.

7. Do not handle the phone with wet hands while it is being charged. It may cause an electric shock or seriously damage your phone.

8. Do not disassemble the phone.

1. Do not place or answer calls while charging the phone as it may short-circuit the phone and/or cause electric shock or fire.

2. Do not hold or let the antenna come in contact with your body during a call.

3. Make sure that no sharp-edged items such as animal’s teeth or nails, come into contact with the battery. This could cause a fire.

4. Store the battery out of reach of children.

5. Be careful that children do not swallow any parts (such as rubber plugs, earphone, connection parts of the phone, etc.) This could cause asphyxiation or suffocation resulting in serious injury or death.

6. Unplug the power cord and charger during lightning storms to avoid electric shock or fire.

7. Only use the batteries and chargers provided by LG. The warranty will not be applied to products provided by other suppliers.

8. Only authorized personnel should service the phone and its accessories. Faulty installation or service may result in accidents and consequently invalidate the warranty.

9. Your service provider programs one or more emergency phone numbers, such as 911, that you can call under any circumstances, even when your phone is locked. Your phone’s preprogrammed emergency number(s) may not work in all locations, and sometimes an emergency call cannot be placed due to network, environmental, or interference issues.

Important Safety Precautions

Table of Contents

Important Safety Precautions 1

Table of Contents 4

Welcome 9

Technical Details 10

Important Information 10

Table of Contents

FCC Part 15 Class B Compliance 10

Technical Details 10

FCC RF Exposure Information 11

Bodily Contact During Operation 13

Vehicle-Mounted the External Antenna 13

FCC Notice and Cautions 13

Caution 14

Part 15.19 statement 14

Part 15.21 statement 15

Part 15.105 statement 15

Phone Overview 16

Menus Overview 18

Getting Started with Your Phone 21

The Battery 21

Installing the Battery 21

Removing the Battery 21

Charging the Battery 22

Battery Charge Level 22

Turning the Phone On and Off 23

Turning the Phone On 23

Turning the Phone Off 23

Signal Strength 23

Screen Icons 24

Making Calls 24

Correcting Dialing Mistakes 25

Redialing Calls 25

Receiving Calls 25

Quick Access to Convenient Features26

Lock Mode 26

Mute Function 26

Quick Volume Adjustments 26

Call Waiting 26

Caller ID 27

Speed Dialing 27

Entering and Editing Information 28

Text Input 28

Key Functions 28

Contacts in Your Phone’s Memory 29

The Basics of Storing Contacts Entries 29

Phone Numbers With Pauses 29

Searching Your Phone’s Memory 31

Contacts Options 31

Making a Call From Your Phone’s Memory 32

Phone Menus 34

Messaging 34

1. New Text Message 34

2. New Picture Message 36

3. Inbox 38

4. Sent 39

5. Drafts 40

6. Voicemail 41

7. Templates 41

8. Settings 42

9. Delete All 43

BREW 44

1. BREW Apps 45

2. BREW Info 45

Web 46

1. Start Browser 46

2. Web Settings 48

Multimedia 48

1. Take Photo 48

2. Record Voice 49

3. Images 50

4. Audios 51

Contacts 52

Table of Contents

1. New Contact 52

2. Contact List 53

3. Groups 54

4. Speed Dials 54

5. My Name Card 55

Call History 55

1. Missed Calls 55

2. Received Calls 56

3. Dialed Calls 56

Table of Contents

4. All Calls 56

5. Call Timer 56

6. Data Counter 56

Bluetooth 57

1. Paired Devices 57

2. Power 59

3. My Visibility 59

4. My Bluetooth Name 59

5. My Bluetooth Info 59

Tools 60

1. Voice Command 60

1.1 Start Command 60

1.1.1 Call <Name> or <Number> 60

1.1.2 Voicemail 61

1.1.3 Missed Calls 61

1.1.4 Messages 61

1.1.5 Time & Date 61

1.1.6 Help 61

1.2 Command Mode 62

1.3 Announce Alert 62

1.4 Train Word 62

1.5 Best Match 63

2. My Menu 63

3. Alarm Clock 63

4. Calendar 64

5. Ez Tip Calc 65

6. Notepad 65

7. Calculator 66

8. World Clock 66

9. Stopwatch 67

0. Unit Converter 67

Settings 67

1. Sound 67

1.1 Ringers 67

1.2 Volume 68

1.3 Message Alerts 68

1.4 Alert Type 68

1.5 Service Alerts 69

1.6 Power On/Off Tone 69

1.7 Flip Tone 69

2. Display70

2.1 Wallpaper 70

2.2 Banner 70

2.3 Backlight 71

2.4 Menu Style 71

2.5 Languages71

2.6 Clocks & Calendar 72

2.7 Font Settings 72

2.8 Name Match for Dialing 73

3. Security 73

3.1 Lock Phone 73

3.2 Restrictions 74

3.3 Emergency #s 74

3.4 Change Lock Code 75

3.5 Reset Default 75

4. Call Settings 76

4.1 Answer Options 76

4.2 Auto Retry 76

4.3 One-Touch Dial 76

4.4 Voice Privacy 76

4.5 Airplane Mode 77

4.6 TTY Mode 77

5. System 78

5.1 Network 78

5.2 Location 79

6. Memory 79

7. Phone Info. 79

Safety 80

TIA Safety Information 80

Exposure to Radio Frequency Signal 80

Antenna Care 81

Phone Operation 81

Tips on Efficient Operation 81

Table of Contents

Driving 81

Electronic Devices 81

Pacemakers 82

Persons with pacemakers: 82

Hearing Aids 82

Other Medical Devices 82

Health Care Facilities 83

Vehicles 83

Posted Facilities 83

Table of Contents

Aircraft 83

Blasting Areas 83

Potentially Explosive Atmosphere 83

For Vehicles Equipped with an Air Bag 84

Safety Information 84

Charger and Adapter Safety 85

Battery Information and Care 86

Explosion, Shock, and Fire Hazards 87

General Notice 87

Warning! Important safety information 89

Avoiding hearing damage 89

Using your phone safely 89

Using headsets safely 90

FDA Consumer Update 90

10 Driver Safety Tips 101

Consumer Information on SAR 104

FCC Hearing-Aid Compatibility (HAC) Regulations for Wireless Devices 107

Accessories 111

Limited Warranty Statement 112

Index 116

Some content in this user guide may differ from your phone depending on the phone software. Features and specifications are subject to change without prior notice.

Welcome

Thank you for choosing the cellular phone, designed to operate with the latest digital mobile communication technology, Code Division Multiple Access (CDMA). Along with the many advanced features of the CDMA system, such as greatly enhanced voice clarity, this compact phone offers:

●

Slim and sleek design with internal antenna.

●

Large, easy-to-read, backlit LCD with status icons.

●

Messaging, voice mail, and caller ID.

●

24-key keypad.

●

Speakerphone feature.

●

Menu-driven interface with prompts for easy operation and configuration.

Nite

●

Any Key answer, Auto Answer, Auto Retry, One-Touch Dial, and Speed Dials with 99 memory locations.

●

Bilingual (English and Spanish) capabilities.

●

Bluetooth®wireless technology.

Note

The Bluetooth®word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by LG Electronics is under license. Other trademarks and trade names are those of their respective owners.

Welcome

Technical Details

Important Information

This user’s guide provides important information on the use and operation of your phone. Please read all the information carefully prior to using the phone for the best performance and to prevent any damage to or misuse of the phone. Any unapproved changes or modifications will void your

Technical Details

warranty.

FCC Part 15 Class B Compliance

This device and its accessories comply with part 15 of FCC rules. Operation is subject to the following two conditions: (1) This device and its accessories may not cause harmful interference, and (2) this device and its accessories must accept any interference received,

including interference that causes undesired operation.

Technical Details

The

Nite

is a trimode phone that operates on among (Code Division Multiple Access CDMA) frequencies: cellular services at 800 MHz, (Personal Communication Services PCS) at

1.9 GHz and AWS (Advanced Wireless Services).

CDMA technology uses a feature called DSSS (Direct Sequence Spread Spectrum) that enables the phone to keep communication from being crossed and to use one frequency channel by multiple users in the same specific area. This results in a 10-fold capacity increase when compared with analog mode. In addition, features such as soft / softer

handoff, hard handoff, and dynamic RF power control technologies combine to reduce call interruptions.

The Cellular and PCS CDMA networks consist of MSO (Mobile Switching Office), BSC (Base Station Controller), BTS (Base Station Transmission System), , MS (Mobile Station) and AWS (Advanced Wireless Services).

* TSB-74: Protocol between an

IS-95A system and ANSI J-STD008

1xRTT system receives twice as many subscribers in the wireless section as IS-95. Its battery life is twice as long as IS-95. Highspeed data transmission is also possible.

The table on the following page lists some major CDMA standards.

FCC RF Exposure Information

WARNING! Read this information before operating the phone.

In August 1996, the Federal Communications Commission (FCC) of the United States, with its action in Report and Order FCC 96-326, adopted an updated safety standard for human exposure to Radio Frequency (RF) electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies. The design of this phone complies with the FCC guidelines and these international standards.

Technical Details

CDMA Standard

Basic Air Interface

Network

Service

Performance

Designator

TIA/EIA-95A TSB-74 ANSI J-STD-008 TIA/EIA-IS2000 ANSI TIA/EIA 553A

TIA/EIA/IS-634 TIA/EIA/IS/651 TIA/EIA/IS-41-C TIA/EIA/IS-124

TIA/EIA/IS-96-B TIA/EIA/IS-637 TIA/EIA/IS-657 IS-801 TIA/EIA/IS-707-A

TIA/EIA/IS-97 TIA/EIA/IS-98 ANSI J-STD-018 ANSI J-STD-019 TIA/EIA/IS-125

Description

CDMA Dual Mode Air Interface

14.4kbps radio link protocol and interband operations IS-95 adapted for PCS frequency band cdma2000 1xRTT AirInterface

MAS-BS PCSC-RS Intersystem operations Non-signaling data comm.

Speech CODEC Short message service Packet Data Position Determination Service (gpsOne) High Speed Packet Data

Cellular base station Cellular mobile station PCS personal station PCS base station Speech CODEC

Bodily Contact During Operation

This device was tested for typical use with the back of the phone kept 0.79 inches (2.0 cm) from the body. To comply with FCC RF exposure requirements, a minimum separation distance of

0.79 inches (2.0 cm) must be maintained between the user’s body and the back of the phone, including the antenna, whether extended or retracted. Thirdparty belt-clips, holsters, and similar accessories containing metallic components should not be used. Avoid the use of accessories that cannot maintain

0.79 inches (2.0 cm) distance between the user’s body and the back of the phone and have not been tested for compliance with FCC RF exposure limits.

Vehicle-Mounted the External Antenna

(Optional, if available.)

To satisfy FCC RF exposure requirements, keep 8 inches (20 cm) between the user / bystander and vehicle-mounted the external antenna. For more information about RF exposure, visit the FCC website at www.fcc.gov.

FCC Notice and Cautions

Technical Details

Any changes or modifications not expressly approved in this user guide could void your warranty for this equipment. Use only the supplied antenna. Use of unauthorized antennas (or modifications to the antenna) could impair call quality, damage the phone, void your warranty and/or violate FCC regulations.

Don't use the phone with a

Technical Details

damaged antenna. A damaged antenna could cause a minor skin burn. Contact your local dealer for a replacement antenna.

Caution

Use only the supplied and approved antenna. Use of unauthorized antennas or modifications could impair call quality, damage the phone, void your warranty and/or result in violation of FCC regulations. Do

not use the phone with a damaged antenna. If a damaged antenna comes into contact with the skin a minor burn may result. Contact your local dealer for a replacement antenna.

Part 15.19 statement

This device and its accessories comply with part15 of FCC rules. Operation is subject to the following two conditions:

(1) This device & its accessories

may not cause harmful interference.

(2) This device & its accessories

must accept any interference received, including interference that may cause undesired operation.

Part 15.21 statement

Change or Modifications that are not expressly approved by the manufacturer could void the user's authority to operate the equipment.

Part 15.105 statement

This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference

will not occur in a particular installation. if this equipment does cause harmful interference or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

Technical Details

Phone Overview

1. Earpiece Lets you hear the caller.

2. LCD Screen Displays messages and indicator icons.

3. Left Soft Key Use to access the Messaging menu

from the standby screen or the function immediately above it.

4. Speakerphone Key Use to turn the Speakerphone

On or Off.

5. SEND Key Use to place or answer calls.

6. Alphanumeric Keypad Use to enter numbers and

characters and select menu items.

Vibrate Mode Key

from standby mode; press and hold for about 2 seconds.

8. Navigation Key Use to navigate through menus and

options. When on the standby screen, use for quick access to Browser, My Menu, Calendar, and BREW.

9. Right Soft KeyUse to access the Contact List from

the standby screen or the function immediately above it.

10.

Menu/OK

Menu, selects the highlighted choice when navigating through a menu or function, or selects the function displayed at the bottom center of the LCD screen.

11. Voice Command Key When in standby mode, use

to start the Voice Command feature.

12. PWR/END Key Use to turn the power on/off and

to end a call. Also, use to exit from any function or menu and return to the standby screen.

13. CLR Key Deletes single spaces or characters with a

quick press; press and hold to delete the entire text entered in a text field. Will also back you out of menus, one level at a time.

14.

Lock Mode Key

standby mode; press and hold for about 2 seconds.

Use to set the vibration mode

Key Lets you access the phone's main

Use to lock the phone from

1. Headset Jack Allows the use of a hands-free

headset.

2. Side Volume Keys Use to adjust the ringer volume

in standby mode and the earpiece volume during a call.

3. Charger/Accessory Port Connects the phone to

the battery charger or other available accessories.

4. Camera Key Press and hold to activate the camera

function.

5. Camera Lens Lets you take pictures.

Charging with PC USB

You can use your computer to charge your phone. Connect one end of a USB cable to the charging accessory port on your phone and the other end to a high-power USB port on your PC.

Phone Overview

Menus Overview

Menu Access

While in standby mode, press Menu to access the main phone menus. There are two methods of accessing menus and submenus:

●

Use the navigation key to highlight a menu/option and press to select it.

●

Press the number key on the keypad to activate the corresponding menu/option.

Messaging

1. New Text Message

2. New Picture

Menus Overview

3. Inbox

4. Sent

5. Drafts

6. Voicemail

7. Templates

8. Settings

9. Delete All

Message

1. All Messages

2. Text Messages

3. Picture Messages

4. Edit Voicemail#

1. Inbox

2. Sent

3. Drafts

4. All Messages

BREW

1. BREW Apps

2. BREW Info

Web

1. Start Browser

2. Web Settings

Multimedia

1. Take Photo

2. Record Voice

3. Images

4. Audios

Contacts

1. New Contact

2. Contact List

3. Groups

4. Speed Dials

5. My Name Card

Call History

1. Missed Calls

2. Received Calls

3. Dialed Calls

4. All Calls

5. Call Timer

6. Data Counter

Bluetooth

1. Paired Devices

2. Power

3. My Visibility

4. My Bluetooth Name

5. My Bluetooth Info

Tools

1. Voice Command

1. Start Command

2. Command

Mode

3. Announce Alert

4. Train Word

5. Best Match

2. My Menu

3. Alarm Clock

4. Calendar

5. Ez Tip Calc

6. Notepad

7. Calculator

8. World Clock

9. Stopwatch

0. Unit Converter

Settings

1. Sound

1. Ringers

1. All Calls

2. Caller ID

3. No Caller ID

4. Restricted Calls

5. Shuffle

2. Volume

1. Master Volume

2. Keypad

3. Earpiece

4. Speaker

3. Message Alerts

1. Text Message

2. Picture Message

3. Voicemail

4. All Messages

5. Message Reminder

4. Alert Type

5. Service Alerts

1. Minute Beep

2. Call Connect

3. Back to Top

4. Low Battery

6. Power On/Off Tone

7. Flip Tone

2. Display

1. Wallpaper

1. Main Screen

2. Front Screen

3. Shuffle

2. Banner

3. Backlight

1. Display

2. Keypad

4. Menu Style

5. Languages

6. Clocks & Calendar

Menus Overview

1. Main Screen

2. Front Screen

7. Font Settings

1. Font Type

2. Dial Font Size

8. Name Match for Dialing

3. Security

1. Lock Phone

2. Restrictions

3. Emergency #s

4. Change Lock Code

5. Reset Default

4. Call Settings

1. Answer Options

2. Auto Retry

3. One-Touch Dial

4. Voice Privacy

5. Airplane Mode

6. TTY Mode

5. System

1. Network

1. System Select

2. Set NAM

3. Auto NAM

4. Serving System

2. Location

6. Memory

1. Reserved Memory

2. Multimedia

7. Phone Info.

1. My Number

2. ESN/MEID

3. Icon Glossary

4. Version

Getting Started with Your Phone

o n

a tt

3 .

7 V

The Battery

The phone comes with a rechargeable battery. The battery charge level is shown at the top of the LCD screen.

Note

It is important to fully charge the battery before initial use of the phone.

Installing the Battery

Remove the battery cover by pressing down on the indentation near the top of the battery cover and sliding it down (1). Align the battery with the terminals near the bottom of the phone, then snap the rest of the battery into place(2). Align the battery cover then slide it upward until it clicks into place(3).

Removing the Battery

Turn the phone off. Slide the battery cover downward to remove it. Use the opening near the top of the battery to lift the battery out.

Getting Start ed with Your Phone

Getting Started with Your Phone

Charging the Battery

Use the charger provided with your phone.

Warning! Use only the charger provided with the phone. Using

Getting Start ed with Your Phone

any charger other than the one included with the Nite may damage your phone or battery.

Notice

Please make sure that the 'B' Side faces up before inserting a charger or data cable into the charger port of your phone.

1. Plug the end of the adapter into the phone’s charger port and the other end into an electrical outlet.

The charge time varies depending upon the battery level.

Battery Charge Level

The battery charge level is shown at the top right of the LCD screen. When the battery charge level becomes low, the low battery sensor alerts you in up to three ways: sounding an audible tone, blinking the battery icon, and displaying a warning message. If the battery charge level becomes exceedingly low, the phone automatically switches off and any function in progress is not saved.

Turning the Phone On and Off

Turning the Phone On

1. Install a charged battery or connect the phone to an external power source if the battery is low.

2. Press for about 2 seconds until the LCD screen lights up.

Turning the Phone Off

1. Press and hold until the display turns off.

Signal Strength

Call quality depends on the signal strength in your area. The signal strength is indicated on the screen as the number of bars next to the signal strength icon

-- the more bars, the better the signal strength. If the signal quality is poor, move to an open area. If you are in a building, the reception may be better near a window.

Note

The call quality may also be affected by the places where you are and weather/ambient conditions.

Getting Start ed with Your Phone

Getting Started with Your Phone

Screen Icons

To see the icon glossary, go to

Settings

Icon Glossary

Getting Start ed with Your Phone

Making Calls

1. With the phone turned on, open the flip.

2. Enter the phone number (include the area code if needed).

3. Press .

4. Press to end the call.

Phone Info

on your phone.

Note

If outgoing calls are restricted, you can only dial phone numbers saved in the Emergency Numbers or your Contact List. To turn off this function:

Menu -> Settings ->

Security -> Enter the Lock

-> -> Restrictions ->

Code

Enter the Lock Code -> ->

Outgoing Calls -> Allow All

Correcting Dialing Mistakes

If you make a mistake while dialing a number, press once to erase the last digit entered, or hold down for at least 2 seconds to go back to standby mode.

Redialing Calls

1. Press twice to redial the last number you dialed. The last 120 calls (40 missed, 40 received, and 40 dialed) are stored in the call history list and you can also select any of these to redial.

Receiving Calls

1. When the phone rings and/or vibrates, press to answer, or open the flip (depending on your Answer Options).

2. Press to end the call.

Tip

To change Answer Options:

Menu -> Settings ->

Call Settings ->

Answer Options.

Choose from the following options:

Flip Open/ Any Key/ SEND Key Only/ Auto Answer

Note

If you press once or (the side volume keys) while the phone is ringing, the ringing and/or vibration is muted for that call.

Getting Start ed with Your Phone

Quick Access to Convenient Features

Lock Mode

The Lock Mode function sets your phone to require a 4-digit password in order to use it.

Quick Access to Convenient Features

To quickly lock your phone press

for 3 seconds. To unlock,

press the Left Soft Key Unlock, enter the Lock Code, and press .

Note

The default Lock Code is the last 4 digits of your phone number until you manually change it.

Mute Function

The Mute function can be used during a phone call. To quickly activate Mute, press the Left Soft

Mute

Key the Left Soft Key

. To cancel, press

Unmute.

Quick Volume Adjustments

Use the side volume keys to adjust the Master Volume while in standby mode and the earpiece volume during a phone call. The upper volume key increases the volume and the lower volume key decreases the volume.

Note

Keypad Volume is adjusted through the Sound Volume menu:

Menu -> Settings ->

Sound -> Volume ->

Keypad -> Use to adjust

volume and press .

Call Waiting

Your cellular service may offer call waiting. While a call is in progress, a beep indicates an incoming call. When call waiting is enabled, you may put the active call on hold while you

answer the incoming call. Check with your cellular service provider for information about this function.

1. During a call, press to answer the incoming call.

2. Press again to switch between calls.

Caller ID

Caller ID displays the phone number or name of the incoming call. If the caller’s identity is stored in Contacts, the name will appear along with the phone number. Check with your service provider to ensure they offer this feature.

Speed Dialing

Speed dialing is a convenient feature that allows you to make phone calls quickly. A number key can be assigned to a specific phone number. By pressing and

holding down a number key, your phone will recall the phone number associated from the Contact List and dial that phone number for you. Speed Dial Number 1 is set to Voice Mailbox by default and is unchangeable.

Dialing Single Digit Speed Dials (from 2 to 9)

Press and hold the Speed Dial number.

Enter the Speed Dial number and press .

Dialing Double Digit Speed Dials (from 10 to 99)

Press the first digit and then press and hold the key of the second digit.

Enter the first and second digits and press .

Quick Access to Convenient Features

Entering and Editing Information

Text Input

You can customize and enter text in many of the functions in your phone, including, but not limited to, the Banner, Calendar,

Entering and Editing Information

Contacts, and messages. While entering text, the following are your options:

Key Functions

Left Soft Key: Press to choose from the following text input modes: T9 Word: T9WORD/ T9Word/ T9word

Abc: ABC/ Abc/ abc 123 Symbols

Shift Key

text entry capitalization. T9 text : T9Word -> T9WORD -> T9word Abc : Abc -> ABC -> abc

Next: In T9 mode, press to display other matching words.

Space: Press to complete a word and insert a space.

Clear: Press to delete a single space or character. Press and hold to delete all of the entered text.

Punctuation: Press to enter punctuation marks or some of the available special characters.

: Press to change

Contacts in Your Phone’s Memory

The Basics of Storing Contacts Entries

1. From standby mode, enter the phone number you want to save (up to 48 digits).

2. Press the Left Soft Key Save.

3. Select either Update Existing.

4. Use to highlight a Label and press .

Mobile 1/Home/Work Mobile 2/Fax

5. Enter a name for the phone number (up to 22 characters) and press . A confirmation message is displayed briefly.

Note

Use

Update Existing

another phone number to a contact already stored in memory.

Save New or

to add

Phone Numbers With Pauses

When you call automated systems, such as voice mail or credit billing numbers, you often have to enter a series of numbers to navigate through the system. Instead of entering these numbers by hand, you can store the numbers in your Contacts separated by special pause characters (W, P). There are two different types of pauses you can use when storing a number:

Wait (W)

The phone stops dialing until you press the Left Soft Key

Release

to advance to the next

string of digits.

Pause (P)

The phone waits 2 seconds before sending the next string of digits.

Contacts in Your Phone’s Memory

Storing a Number with Pause or Wait

1. Press

2. Press

Contacts in Your Phone’s Memory

3. Press

4. Enter a name (up to 22 characters) and enter a number.

5. While entering a number, press the Right Soft Key

Options.

6. Press

Pause

7. Enter additional number(s), then press

Contacts

New Contact

Wait

Save

Adding a Pause or Wait to an Existing Number

1. While in standby mode, press the Right Soft Key

Contacts

your Contacts alphabetically.

2. Use to highlight the Contact entry to edit, then press

3. Press the Left Soft Key

Edit

4. Use to highlight the number.

5. Press the Right Soft Key

Options

6. Press

Pause

7. Enter additional number(s), then press

to display

View

Wait

Save

Searching Your Phone’s Memory

The

Nite

phone is able to perform a dynamic search of the contents in your phone’s Contact List. A dynamic search compares entered letters or numbers on the keypad against the entries in your Contacts. A matching list is displayed in descending order. You can then select a number from the list to call or view.

Searching by Letter

1. Press the Right Soft Key

Contacts

to display your

Contacts alphabetically.

2. Start entering the Contact

name. The matching entries will be automatically highlighted.

Scrolling Through Your Contacts

1. Press the Right Soft Key

Contacts

to display your

Contacts alphabetically.

2. Use to scroll through the list.

Contacts Options

1. Press the Right Soft Key

Contacts

2. Highlight a contact and press the Right Soft Key

Options

3. Use to highlight an option, then press or press the corresponding number on the keypad to select from the following options:

Contacts in Your Phone’s Memory

Send Message

message or picture message to the selected contact.

: Send a text

Delete: Delete the selected

entry from your Contact List.

Edit

: Edit the selected

contact's information.

Delete Multiple

from

Selective/All

delete multiple entries at one time.

Send via Bluetooth

a contact(vCard) via Bluetooth.

Change Search Type

Choose from

: Choose

: Send

Default Searching Style/ Secondary Searching Style

to search entries.

Set Speed Dial/ Remove Speed Dial

selected contact as a Speed Dial or remove the contact's Speed Dial assignment.

: Set the

Making a Call From Your Phone’s Memory

Once you have stored phone numbers in your Contacts, you can place calls to those numbers quickly and easily.

●

By pressing the Right Soft Key

Contacts

number, and pressing .

●

By using Speed Dialing.

, highlighting a

From Contacts

1. Press the Right Soft Key

Contacts

to display your

Contacts.

2. Use to highlight the Contact entry, then press .

3. Use to highlight the phone number.

4. Press to place the call.

From Call History

1. Press

2. Press

3. Use to highlight the type of recent call, then press .

Call History

Missed Calls/Received Calls/Dialed Calls/All Calls

4. Use to highlight the phone number.

5. Press to place the call.

Speed Dialing

For a single-digit Speed Dial, press and hold the digit or press the digit, then press . For a double-digit Speed Dial, press the first digit and hold the second digit or press the first and second digits, then press

Contacts in Your Phone’s Memory

Phone Menus

Messaging

The phone can store up to 535 messages (including a maximum of 200 SMS and 200 MMS in the Inbox). The information stored in the message is determined by phone model and service capability. Other limits, such as available characters per message, may exist. Please check with your service provider for system features and capabilities.

Messaging

1. New Text Message

Allows you to send text messages and e-mail transmissions. Each message will be formatted and sent according to the destination address.

The Basics of Sending a Text Message

1. Press , , .

2. Enter the recipient's address.

3. Press to access the text field.

Type your message (text or e-mail).

5. Press Send.

A confirmation message is displayed.

Select Recipient(s) Using Options

1. Press , , .

2. Press the Right Soft Key

Options

while in the

3. Use to highlight an option and press .

To:

field.

Contacts

from your Contact List.

Recent Calls

recipient from your Recent Calls.

Recent Messages

Inbox/ Sent

from your Recent Messages.

Groups

your Groups.

Cancel

4. Complete your message and

To select a recipient

To select a

Choose

to select a recipient

Select a recipient from

Cancels your message.

send or save it.

Customize Your Text Message

Using Options

You have various options to customize the text while you are composing a message.

1. Press , , .

2. Enter the recipient's address.

3. Press to access the text field.

4. Press the Right Soft Key

Options

5. Select from the following options:

Add Templates/Signature

Save As Draft

Priority Level Normal

Callback # On

Templates

Off

High

Delivery Notice Enhanced/

Normal

Cancel

Cancels your message.

6. Complete your message and send or save it.

Messaging

Message Icon Reference

Inbox

New/Unread Text/Picture Message

Opened/Read Text/Picture Message

New/Unread Notification Message

Opened/Read Notification Message

High Priority

New/Read High Priority MMS

Sent

Failed Text/Picture Message

Messaging

Multiple Failed Text/Picture Messages

Sent Text/Picture Message

Multiple Sent Text/Picture Messages

Drafts

Draft Text Message

Draft Picture Message

2. New Picture Message

Allows you send messages with Text, Images, and Audio.

1. Press , , .

2. Enter the recipient's address, or press the Right Soft Key

Options

to search recent

contacts.

3. Press to access the text field.

4. Type your message, then use

to highlight other fields.

5. With the

6. Use to highlight a picture,

Image

field

highlighted, press the Left Soft

Add

Key

and press

to select:

Image / Take Photo

then press the Left Soft Key

Set.

7. With the

8. Use to highlight a sound,

9. Use to highlight the

10. When editing a field, the

* Editing the To: field

Audio

field highlighted, press the Left Soft Key

then press the Left Soft Key

Subject

subject.

following options are available by pressing the Right Soft Key

Add

Set

field and enter your

Options

Contacts/ Recent Calls/ Recent Messages/ Groups/ Cancel

* Editing the Text field

Preview/ Add/ Go to/ Save As/ Priority Level/ Delivery Notice/ Remove/ Cancel

* Editing the Image field

Preview/Add Slide/ Go to Save As Draft/ Priority Level/ Delivery Notice/ Remove/ Cancel

* Editing the Audio field

Preview/Add Slide/Go to

Save As Draft/Priority Level Delivery Notice/ Remove Cancel

* Editing the Subject field

Preview/Add/Go to/Save

Priority Level/Delivery

As Notice/ Remove

11. Press

Send

Cancel

Messaging

3. Inbox

The phone can alert you in several ways when you receive a new message, including:

●

Displaying a notification message on the screen.

●

Displaying the message icon

on the status bar (It

blinks when the message is urgent).

●

Messaging

Ringing and/or Vibrating (depending on the Master Volume settings).

Received messages are displayed from newest to oldest.

Viewing Your Inbox

Up to 500 (200 SMS, 100 MMS, and 100 MMS Notifications) messages can be stored in the Inbox.

1. Press , , .

2. Use to highlight a message.

3. Press the Left Soft Key

to reply to the message,

View

to view the message,

or the Right Soft Key

Options

to access additional

options.

The following options are available:

For text messages:

Delete/ Forward/ Save Contact/ Lock (Unlock)/ Delete Multiple/ Message Info

For picture messages:

Delete/ Forward/ Save Contact/ Lock (Unlock)/ Delete Multiple/ Message Info

4. Once you select the option for the message, press the Left Soft Key to reply or the Right Soft Key

Options

additional options.

View

to view

Delete

Deletes the selected

message from the Inbox.

Forward

Forwards a received message to other destination address(es).

Save Contact Stores or updates

the phone numbers and e-mail addresses in the received message into your Contacts.

Save as Templates

Stores the message as a template for future messages.

Call Back

Calls the number in

the received message.

Go to Website

Opens the browser and directs you to the URL included in the message.

Lock/Unlock

Locks or unlocks

the selected message.

Message Info

Shows the message type, priority, and status.

Note

For Picture Messages:

Delete/ Forward/ Save Contact/ Save Media/ Lock (Unlock)/ Message Info

4. Sent

Up to 100 sent messages (50 SMS and 50 MMS) can be stored in the Sent folder. View the contents of sent messages and verify whether the transmission was successful.

1. Press , , .

2. Use to highlight a sent message. Press the Left Soft Key

Resend

to resend the

message to the recipient,

View

to view the message, or

the Right Soft Key

Options

to access the

following options:

Delete/ Forward/ Save

Messaging

Contact/ Lock (Unlock)/ Delete Multiple/ Message Info

3. While viewing the selected sent message, press the Left Soft Key resend the message to the recipient or the Right Soft Key

Options

following options:

Delete

Deletes the selected

Messaging

message from the Sent folder.

Forward

message to other destination address(es).

Save Contact

updates the phone numbers and e-mail addresses in the sent message into your Contacts.

Save as Templates

message as a template for future messages.

Resend

to access the

Forwards a received

Stores or

Stores the

Lock/Unlock

the selected message.

Message Info

message type, priority, and status.

Note

For picture messages:

Delete/ Forward/ Save Contact/ Save Media/ Lock (Unlock)/ Message Info

Locks or unlocks

Shows the

5. Drafts

Displays saved draft messages.

1. Press , , .

2. Use to highlight a

Edit

message. Press the message or the Right Soft Key following options:

Options

to edit

for the

Delete

Deletes the selected

message from the Drafts folder.

Save Contact

Stores or updates the phone numbers and e-mail addresses in the draft message into your Contacts.

Lock/Unlock

Locks or unlocks

the selected message.

Delete Multiple

Allows you to delete multiple messages at one time.

6. Voicemail

Allows you to access new voice messages recorded in your voicemail box. Your phone will notify you when you receive a new voice message.

Checking Your Voicemail Box

1. Press , , .

2. Choose from the following options:

●

Press the Left Soft Key Clear to clear the voicemail counter.

●

Press to listen to the message(s).

●

Press the Right Soft Key

Exit

to return to the Messaging

menu.

7. Templates

Allows you to display, edit, and add text phrases. These text strings allow you to reduce manual text input into messages.

1. Press , , .

2. Press the Left Soft Key

New

to create a new template.

Messaging

3. Enter the desired text and press template.

4. Use to highlight a template and press the Right Soft Key highlight an option and press

Edit/ Delete

Save

to select it.

8. Settings

Messaging

Allows you to configure Messaging settings.

1. Press , , .

2. Use to highlight

Messages Picture Messages/ Edit Voicemail #

3. Use to highlight one of the submenus and press to select it.

/ Text Messages/

to save the

Options

, then

All

then press .

Message Settings Sub-Menu Descriptions

All Messages

1. Auto Save (Auto Save/ Prompt/ Do Not Save)

With this feature on, messages are automatically saved in the Sent folder when transmitted.

2. Auto Delete (On/ Off)

With this feature on, read messages are automatically deleted when you exceed the storage limit.

3. Entry Mode (T9Word/ABC/123)

Allows you to select the default input method.

4. Signature (On/ Off/ Edit)

Allows you to create and edit a signature to automatically send with your messages.

Text Messages

1. Callback # (On/ Off/ Edit)

With this feature on, you can input the callback number that will be automatically included when you send a message.

Picture Messages

1. Auto Receive (On/ Off)

With this feature on, attached content will automatically download when a new picture message is received.

Edit Voicemail #

Allows you to manually enter the access number for Voicemail Service. This feature should only be used when a VMS (Voicemail Service) access number is not provided from the network.

9. Delete All

Allows you to erase the messages stored in your Inbox, Sent, or Drafts message folders. You can also erase all messages at the same time.

1. Press , , .

2. Use to highlight Inbox/ Sent/ Drafts/ All Messages, then press .

Ye s

3. Use to highlight

and press .

Messaging

BREW

BREW allows you to do more than just talk on your phone. BREW is a technology and service that allows you to download and use applications on your phone. With BREW, it is quick and easy to personalize your phone to suit your lifestyle and tastes. Just download the applications that appeal to you. With a wide range of software available, from ringtones to games to productivity tools, you

BREW

can be assured that you will find something useful, practical, or down right entertaining.

Downloading Applications

You can download applications and use BREW anywhere on the network as long as your handset has a digital signal available.

Incoming Calls

While downloading an application, incoming calls will automatically be sent to your voicemail, if available. If you do not have voicemail, downloading will not be interrupted by an incoming call and the caller will receive a busy signal. When using applications, an incoming call will automatically pause the application and allow you to answer the call. When you complete your call, you can resume using the application.

1. BREW Apps

Allows you to download applications.

1. Press , , .

2. Highlight to confirm.

Use to highlight

MobileShop

4. Use to highlight and press to select.

Note

If you attempt to download an application when the file memory is full, the following message will be displayed: "Sorry, not enough memory to complete download. You will not be charged for this item. Please try again later." If you select Yes, the app(s) will be temporarily disabled.

Ye s

and press

and press .

Catalog

2. BREW Info

Allows you to set the Airtime Charge Warning message that pops up when BREW Apps is started to ON or OFF.

1. Press , , .

2. Press the Left Soft Key

Yes

to confirm.

Managing Your BREW Apps Applications

Download new applications and delete old ones at anytime.

Deleting Applications

Only removing an application deletes it completely from the memory of the phone. To restore an application once it has been deleted, you will be charged to download it again.

BREW

Web

The Web feature allows you to view Internet content. Accessibility and selections within this feature are dependent upon your service provider. For specific information on Web, contact your service provider.

1. Start Browser

Allows you to initiate an Web session.

1. Press , , .

Web

2. An airtime charges prompt can appear if the setting is enabled. Highlight press to continue.

3. After a few seconds, you will see the home page.

Ye s and

Ending an Web Session

End an Web session by pressing

Navigating Through the Browser

On-screen items may be presented in one of the following ways:

●

Numbered options

You can use your numeric keypad or you can select the items by highlighting the link and pressing the appropriate numeric key(s).

Scrolling

Use to scroll through the content if the current page does not fit on one screen. The currently selected item will be highlighted.

Fast Scrolling

Press and hold to quickly move the screen up and down.

Soft Keys

The Left Soft Key is used primarily for first options or selecting an item, but its function may change depending on the content displayed.

The Right Soft Key is used primarily for secondary options or a menu of secondary options.

Entering Text, Numbers, or Symbols

When prompted to enter text, the current text entry method appears above the Right Soft Key as To change the input mode, press the Right Soft Key . To change to upper case, press

abc, Sym, 123, etc

Clearing Out Text/Numbers

Entered

When entering text or numbers, press to clear the last number, letter, or symbol. Press and hold to clear the input field completely.

Web

Web/ Multimedia

Initiating a Phone Call From Web

You can make a phone call from the Web if the site you are using supports the feature. The browser connection is terminated when you initiate the call. After you end the call, your phone returns to the screen from which you initiated the call.

Web/ Multimedia

2. Web Settings

Allows you to configure the settings for the Web.

1. Press , , .

●

Prompt

At Start/At End/Both None

●

Alert Beep

Mute/ 2 Beeps/ 4 Beeps

Multimedia

View, take, and trade your digital pictures right from your wireless phone.

1. Take Photo

1. Press , , .

2. Press to set the brightness, to Zoom in and out, the Left Soft Key

Gallery

to view

, or press the Right

Images

Options

Soft Key change the following settings:

View Mode

Landscape

Resolution

320X240/ 176X144/ 16 0 X 12 0

Quality

Economy

Fit to Screen/

640X480/

Fine/ Normal/

Zoom

Brightness

Night Mode

Self Timer

On/ Off

Off/ 3 Seconds/

5 Seconds/ 10 Seconds

White Balance Auto/ Sunny/

Cloudy/ Tungsten/ Fluorescent

Color Effects

Color/ Sepia/

Mono/ Negative

Template

Shutter Sound

On/ Off

None/ Sound

1/ Sound 2/ Sound 3

Multishot

Off/ 3 shots/

6 shots

Auto-Save

3. Take a picture by pressing

Ta k e

4. Select

Send

Message and

Enable/ Disable

Save,Send

will open a new Picture

, or

Delete

will

delete the picture and return to camera mode. If you choose

Save

, the following

options are available:

●

Save

●

Set As

1. Main Screen

2. Front Screen

3. Picture ID

Saved pictures are stored in

Images.

2. Record Voice

Allows you to add, listen to, and erase short verbal reminders.

1. Press , , .

2. Press new voice memo.

3. Talk into the microphone, then press

Record

Stop

Multimedia

to record a

Multimedia

4. Once you've stopped the recording, press the Right Soft

Options

Key the following:

Set As/ Rename/Delete

Press the Left Soft Key

Save to save the memo. The

default memo title is the date and time of recording.

3. Images

Multimedia

Allows you to view the saved images on your phone. You can also select images to customize your phone's Main Screen, Front Screen, or Picture ID.

1. Press , , .

2. Use to highlight My

/ Default then press

Images

to access

3. Use to highlight an image. Once you have an image highlighted, you can:

●

Press the Right Soft Key

Options to access

additional options. Use to highlight an option and press to select it. The following options are available:

Send/ Set As/ Delete/ Rename/ Lock (Unlock)/ List View (Icon View)/ Information/ Delete Multiple/ Sort by/ Send via Bluetooth

●

Press highlighted image.

●

Press the Left Soft Key

Send

image to somebody else. (This option is only available in My Images).

View

to view the

to send the highlighted

4. Audios

Allows you to access saved audio clips on your phone.

1. Press , , .

2. Press the Left Soft Key

Voice

to record an audio clip.

●

Press the Left Soft Key

Audio

to access

●

Press recording.

●

While recording, press the Left Soft Key pause or recording.

Record

Stop

My Audios

to begin

Pause

to stop

●

When you are finished recording, press the Left Soft Key

Save to save

the audio clip.

●

Press the Right Soft Key

Options to access

additional options. Use to highlight an option and

press .

Set As

(Ringtone/ Ringer

ID/ Message Alerts)/

Rename/Delete

2. Use to highlight /

Default

Audios

and press

3. Use to highlight an audio

clip.

Multimedia

Multimedia/ Contacts

●

Press the Left Soft Key

Send

to send the selected audio clip to somebody else. Please note that this option is not available for files in the Default folder.

●

Press highlighted audio clip.

●

Press the Right Soft Key

additional options. Use to highlight an option and press .

For

Play

Options

My Audios

to play the

to access

files:

Send/ Set As/ Record Voice/ Delete/ Rename/ Lock (Unlock)/ Information/ Delete Multiple/ Sort By/ Send via Bluetooth

For

Default

files:

Set As/ Information

Contacts

The Contacts Menu allows you to store names, phone numbers and other information in your phone’s memory. When you access your Contacts, the number in parentheses represents the number of entries you have stored (up to 1000).

1. New Contact

Allows you to add a new contact to your Contact List.

Note

Using this submenu, the number is saved as a new Contact. To save the number into an existing Contact, edit the Contact entry.

1. Press , , .

2. Enter the name, then press to highlight the field you

wish to store the contact information in.

3. Enter the phone number or

e-mail address.

4. When you are finished

entering the desired contact information, press

Save

save the entry into your Contact List.

2. Contact List

Allows you to view your Contact List.

1. Press , , .

2. Choose from the following options:

●

Press to scroll through your Contacts alphabetically.

●

Press the Right Soft Key

Options

of the following options:

Send Message/ Delete/

Edit/ Delete Multiple/ Send via Bluetooth/ Change Search Type/ Set Speed Dial (Remove Speed Dial)

●

Press highlighted contact's information.

●

Press the Left Soft Key

New

Contact.

to select one

View

to view the

to create a new

Contacts

3. Groups

Allows you to view your grouped Contacts, add a new group, change the name of a group, or delete a whole group.

1. Press , , .

2. Choose from the following options:

●

Use to highlight a group, then press to view the contacts in the

Contacts

selected group.

●

Press the Left Soft Key

New

to add a new group.

●

Use to highlight a group, then press the Right Soft Key choose from the following options:

Delete/ Send Message/ Rename Group/ Set Ringtone

/ Delete All

Options

4. Speed Dials

Allows you to view your Speed Dials list, designate new Speed Dials, or remove Speed Dial designations entered in your Contacts.

1. Press , , .

2. Use to highlight the desired Speed Dial location

View

(or enter the Speed Dial digit) and press

3. Use to highlight the Contact.

4. Use to highlight the number (if applicable), then press .

A confirmation message is displayed.

Assign

Contacts/ Call History

5. My Name Card

Allows you to view all of your personal Contact information, including name and phone numbers.

1. Press , , .

2. Use to highlight the field you wish to edit and press the Left Soft Key

3. Edit the information as desired and press .

Note

You cannot edit the Mobile 1 field, but you can add additional contact info.

Edit

Call History

The Call History menu has lists of phone numbers and/or Contacts entries for calls you missed, received, or dialed. It is continually updated as new numbers are added to the beginning of the list and the oldest entries are removed from the bottom of the list.

Note

To quickly view a list of all your recent calls, press from standby mode.

1. Missed Calls

Allows you to view the list of missed calls; up to 40 entries.

1. Press , , .

2. Use to highlight an entry.

Contacts/ Call History

Call History

2. Received Calls

Allows you to view the list of incoming calls; up to 40 entries.

1. Press , , .

2. Use to highlight an entry.

3. Dialed Calls

Allows you to view the list of outgoing calls; up to 40 entries.

1. Press , , .

Call History

2. Use to highlight an entry.

4. All Calls

Allows you to view the list of missed, received, and dialed calls; up to 120 entries.

1. Press , , .

2. Use to highlight an entry.

5. Call Timer

Allows you to view the duration of selected calls, by type.

1. Press , , .

2. Use to highlight a call

type, then press .

Last Call/Home Calls/Roam

All Calls

Calls

6. Data Counter

Allows you to view the amount of Received and Sent data.

1. Press , , .

2. Use to highlight a type of

data, then press .

Received Data/Sent Data All Data

Bluetooth

The

Nite

is compatible with

devices that support the

Bluetooth Object Push, and Phonebook Access profile(s). You may create and store 20 pairings within the

Nite

at a time. The approximate communication range for Bluetooth up to 30 feet (10 meters).

Bluetooth QD ID B015489

Headset, Hands-Free,

and connect to one device

wireless technology is

Note

Read the user guide of each

accessory that you are

Bluetooth trying to pair with your phone because the instructions may be different.

The Bluetooth this handset may not be compatible with all Bluetooth Your service provider or handset manufacturer cannot be held responsible for compatibility issues with devices not sold by the service provider or handset manufacturer.

features available on

enabled devices.

1. Paired Devices

Pairing is the process that allows the handset to locate, establish and register 1-to-1 connection with the target device.

For pairing new Bluetooth device

1. Press , , .

Bluetooth

Follow the Bluetooth accessory instructions to set the device to pairing mode.

2. Press the Left Soft Key

3. If Bluetooth off, you will be prompted to turn the power on. Highlight Ye s and press .

4. Select

Bluetooth

in the Add New Device menu once it has been located. Highlight the device and press

Pair

5. Depending on the type device:

- The phone will Auto-pair.

- You will need to confirm

matching codes.

power is set to

New Search/Last

. The device will appear

- You will need to enter a passkey. Consult the Bluetooth

accessory instructions for the appropriate passkey (typically “0000” - 4 zeroes). Enter the passkey and press .

6. The handset will prompt you for your connection preferences. Highlight

Always Connect

Ask

Always

and

press .

Once connected, you will see the device listed in the Paired Devices menu.

2. Power

Allows you to set the power On/Off.

1. Press , , .

2. Use to highlight a setting, then press .

On/Off

Note

By default, your device’s Bluetooth functionality is turned off.

3. My Visibility

Allows you to set the visibility of your

Bluetooth®function.

1. Press , , .

2. Use to highlight a setting, then press .

Visible/Hidden

Note

If you turn on My Visibility, your device is able to be discovered by other in-range Bluetooth one minute.

devices for

4. My Bluetooth Name

Allows you to edit the name of the Bluetooth

1. Press , , .

2. Hold down to clear the existing name.

3. Use the alphanumeric keypad to enter a new alias.

4. Press exit or the Right Soft Key

Cancel

device.

Save

to save and

to cancel editing.

5. My Bluetooth Info

Allows you to view the information of the Bluetooth function.

1. Press , , .

Bluetooth

Tools

Your phone tools include: Voice Command, My Menu, Alarm Clock, Calendar, Ez Tip Calc, Notepad, Calculator, World Clock, Stopwatch, and Unit Converter.

1. Voice Command

Allows you to make phone calls quickly and easily by voice commands. This menu also includes a feature for those who may be driving or blind. It

Tools

delivers time information and allows you to check missed calls, messages and voicemails.

Shorcut

When in standby mode, press to quickly and easily access Voice Command.

1.1 Start Command

1. Press , , , .

From the standby mode, press the Voice Command Key .

1.1.1 Call <Name> or <Number>

1. Press , , , ,

From the standby mode, press the Voice Command Key and say "Call".

2. Say name (and phone type, if

applicable) or number.

1.1.2 Voicemail

Press , , ,

From the standby mode, press the Voice Command Key and say "Voicemail".

2. Press to call Voicemail.

1.1.3 Missed Calls

Press , , ,

From the standby mode, press the Voice Command Key and say "Missed Calls".

2. The handset will prompt you to dial each number. Say or No to proceed.

Yes

1.1.4 Messages

Press , , ,

From the standby mode, press the Voice Command Key and say "Messages".

1.1.5 Time & Date

Press , , ,

From the standby mode, press the Voice Command Key and say "Time & Date".

1.1.6 Help

Press , , ,

From the standby mode, press the Voice Command Key and say "Help".

Tools

1.2 Command Mode

Allows you to set command mode to Normal or Speed (The Speed setting allows you to access and use the Voice Command functions more quickly with a faster, non-verbal prompt).

1. Press , , , .

2. Use to highlight an option and press .

Normal/ Speed

1.3 Announce Alert

Tools

Allows you to customize Announce Alert. Announce Alert lets your hear more information about an incoming call or message instead of, or along with, your ringtone.

1. Press , , , .

2. Use to highlight an option and press .

Disable/ Announce/ Announce + Ring

1.4 Train Word

Allows you to train words for improved Voice Command responses.

1. Press , , , .

2. Use to highlight an option and press .

Voice Command/ Answer/ Digit Dial

1.5 Best Match

Allows you to choose whether the phone displays the 4 closest matches or only the closest match when using the "Call <Name> or <Number>" function.

1. Press , , , .

2. Use to highlight an option and press .

1 Match/ 4 Matches

2. My Menu

Allows you quick access to your favorite menus. A maximum of 12 items can be stored in My Menu.

1. Press , , .

2. Use to highlight the location of your choice, then press

Assign.

3. Use to highlight the menu you wish to add to My Menu, then press

Assign.

3. Alarm Clock

Allows you to set up to five alarms. At the alarm time, any set alarm will sound (depending on your Master Volume settings) the tone of your choice and an alarm message will be displayed on the LCD screen.

1. Press , , .

2. Use to highlight the alarm you wish to set, then press to select it.

3. Press the Left Soft Key

Set

to set the alarm time.

Press when you are done.

4. Use to highlight (recurrence setting).

Repeat

Tools

5. Use to select one of the following settings:

Once/Daily/Mon - Fri Weekends

6. Use to highlight

Ringtones, press the Left Soft

Key

Set and browse for a

ringtone.

7. Press

Save

4. Calendar

Allows you to store and access your agenda(s). Simply enter

Tools

your appointments in the Calendar and your phone can (depending on your settings) alert you with a reminder.

1. Press , , .

2. Use to highlight the scheduled day.

Moves to the previous day.

Moves to the next day.

Moves to the previous week.

Moves to the next week.

3. Press the Left Soft Key

New

4. Use to highlight the field you wish to edit, then press the Left Soft Key

Set

to edit your schedule information.

●

Set Time

●

Reminder●Repeat

●

Repeat End●Ringtone

5. Press

Save

●

Subject

5. Ez Tip Calc

Allows you to quickly and easily estimate the tip and total amount of a bill by inputting the bill amount before tip, the tip percentage, and dividing it by the number of people paying.

1. Press , , .

6. Notepad

Allows you to add, read, edit, and erase notes.

1. Press , , .

2. Press the Left Soft Key

New to write a new note.

3. Type the note, then press

Save

A confirmation message displays briefly, then displays your list of notes.

Viewing and Editing a Notepad Entry

1. Access Notepad and highlight a saved note.

2. Press the Right Soft Key

Options

and choose from the

following options:

●

Delete Delete All

●

Edit

Press the Left Soft Key

View

, then press

Edit

the Right Soft Key

Delete

Tools

7. Calculator

Allows you to perform simple mathematical calculations.

1. Press , , .

2. Enter data.

●

Use keypad to enter numbers.

●

Use to enter decimals.

●

Use to set as negative or positive.

●

Tools

Press the Left Soft Key Clear to clear the entry.

●

Press the Right Soft Key

Operator for additional

calculating options.

●

Use the Navigation Keys to enter functions.

3. Press to complete the equation.

8. World Clock

Allows you to determine the current time in cities in another time zone or country.

1. Press , , .

2. Press the Right Soft Key

Cities

to select a specific city and display the date/time in that location.

3. Use to scroll through all available cities on the map.

4. Press to select the highlighted city.

5. Press the Left Soft Key

Set DST

to set Daylight

Savings Time.

Tools/ Settings

9. Stopwatch

Allows you to use your phone as a stopwatch.

1. Press , , .

2. Press stopwatch and press to stop it.

●

3. Press the Right Soft Key

Reset to reset.

Start to start the

Stop

You can use the Lap function by pressing the Left Soft Key up to 20 laps and lap times.

Lap

to record

0. Unit Converter

Allows you to convert units of Area, Lenght, Temperature, Mass, Volume, and Velocity.

1. Press , , .

2. Highlight a unit type and enter the unit amount. The conversions will be calculated automatically.

Settings

1. Sound

The Sound menu allows you to customize your phone sounds.

1.1 Ringers

Allows you to assign ringtones for incoming calls.

1. Press , , , .

2. Use to highlight

Caller ID/No Caller ID Restricted Calls/Shuffle

press .

3. Use to highlight or

Audios

4. Use to highlight the

ringtone and press preview the ringtone or the Left Soft Key ringtone to your phone.

Default

All Calls

, then

, then press

Play

Set

to set as

Tools/ Settings

Settings

1.2 Volume

Allows you to set various volume settings.

1. Press , , , .

2. Use to highlight

Keypad/Earpiece

Volume Speaker

, then press .

3. Use to adjust the volume of the ringer, then press to save the setting.

1.3 Message Alerts

Settings

Allows you to select the alert tone for a new message and set the frequency of the Message Reminder.

1. Press , , , .

2. Use to highlight

Message Voicemail/All Messages Message Reminder

press .

Picture Message

Master

Te x t

, then

3. Use to browse the folders and highlight a file, then press the Left Soft Key

Set

to set the tone as

your alert.

1.4 Alert Type

Allows you to select the alert types.

1. Press , , , .

2. Use to highlight the alert you wish to edit.

Call Alert/ Message Alert/ Schedule Alert/ Alarm Alert/ Emergency Alert

3. Use to scroll through the alert types.

Ring Only/ Vibrate Only/

Ring & Vib

4. Press

Save

to save.

1.5 Service Alerts

Allows you to set any of the Service Alert preferences.

1. Press , , , .

2. Highlight one of the following alert types, then press :

1.5.1 Minute Beep

Alerts you 10 seconds before the end of every minute during a call.

1.5.2 Call Connect

Alerts you when the call is connected.

1.5.3 Back to Top

Alerts you when you scroll through the end of a menu list.

1.5.4 Low Battery

Alerts you when the battery charge level is low.

3. Use to highlight then press (For Low Battery, options are:

Announce/Tone

On/Off

1.6 Power On/Off Tone

Allows you to set the phone to sound a tone when the phone is powered on and off.

1. Press , , , .

2. Use to highlight

Off

, then press .

1.7 Flip Tone

Allows you to set a flip tone that will play when you flip your phone open or closed.

1. Press , , , .

2. Use to highlight

Off

, then press .

Settings

2. Display

The Display menu allows you to customize your phone’s display screen.

2.1 Wallpaper

Allows you to choose the kind of background to be displayed on the phone.

1. Press , , , .

2. Use to highlight

Front Screen

Settings

Screen Shuffle,

then press .

2.1.1 Main Screen

Use to highlight an image from

Default

view the image or the Left Soft Key the wallpaper.

My Images

and press

Set

Main

View

to set it as

2.1.2 Front Screen

Use to highlight an image

My Images or Default

from and press View to view the image or the Left Soft Key

Set to set it as the

wallpaper.

2.1.3 Shuffle

Set Shuffle to Onor

Main Screen

the

Front Screen Repeat

frequency.

2.2 Banner

Allows you to enter a string of characters which display on the LCD screen.

1. Press , , , .

2. Use to scroll between

On/Off

Off

and/or

and set the

for

3. Use to highlight the text field.

4. Enter your desired text and press the Left Soft Key

Abc

to change text entry options, the Right Soft Key to cancel editing your banner.

Save

to save, or

Cancel

2.3 Backlight

Allows you to set the duration for illuminating the backlight.

1. Press , , , .

2. Use to highlight a submenu, then press .

Display/ Keypad

3. Use to highlight a setting, then press .

7 Seconds/ 10 Seconds/ 15 Seconds/ 30 Seconds/ Always On/ Always Off

2.4 Menu Style

Allows you to display the main Menu in either Icon or List view.

1. Press , , , .

2. Use to highlight

Icon or

List, then press .

2.5 Languages

Allows you to use the bilingual feature according to your preference. Choose between English and Spanish.

1. Press , , , .

2. Use to highlight or

Spanish

, then press .

English

Settings

2.6 Clocks & Calendar

Allows you to select the type of clocks displayed on the main LCD and the external LCD.

1. Press , , , .

2. Use to highlight a submenu, then press .

Main Screen/Front Screen

3. Use to highlight an option and press .

Settings

Options for Main Screen:

Normal Clock/ Analog Clock/ Digital Clock/ Dual Clock/ Calendar/ Clock & Keymap

Options for Front Screen:

Minimize/ Digital Clock

2.7 Font Settings

Allows you to select the type of font displayed on the LCD.

1. Press , , , .

2. Use to highlight a submenu, then press .

Font Type/ Dial Font Size

3. Use to highlight an option, then press .

Options for Font Type

LG Gothic/ LG Secret/ LG Greentea

Options for Dial Font Size

Normal/Large

2.8 Name Match for Dialing

Allows you to turn Name Match for Dialing On or Off.

1. Press , , , .

2. Use to highlight a

setting, then press .

3. Security

The Security menu allows you to secure the phone electronically.

3.1 Lock Phone

Keeps your phone from unauthorized use. Once the phone is locked, it is in restricted mode until the Lock Code is entered. You can still receive phone calls and make emergency calls. You can modify the Lock Code in the Change Lock Code submenu within the Security menu.

1. Press , , .

2. Enter the four-digit Lock Code and press .

The default Lock Code is usually the last 4 digits of your phone number.

3. Press

4. Use to highlight an

option, then press .

Unlock

unlocked by default until it is locked manually.

Lock Phone

The phone remains

Lock Locks the phone. When

locked, you can receive incoming calls and only make calls to Emergency Numbers (

Menu > Settings >

Security

> Enter your

Lock Code > >

Emergency #s

Settings

On Power Up

locked when it is powered on.

3.2 Restrictions

Allows you to restrict Calls, Messaging, Camera, or Data.

Note

You can receive the incoming calls from saved contacts on your phone when Contacts Only is on.

1. Press , , .

2. Enter the four-digit Lock Code

Settings

and press .

3. Press

4. Enter the four-digit Lock Code and press .

5. Use to highlight

Restrictions.

Calls/ Outgoing Calls/ Incoming Messages/ Outgoing Messages/ Camera/

, then press .

Data

The phone is

Incoming

3.3 Emergency #s

Allows you to enter 3 emergency numbers. You can call these emergency numbers and 911, even when the phone is locked or restricted.

1. Press , , .

2. Enter the four-digit Lock Code and press .

3. Press

4. Use to highlight one of the 3 options, then press to edit the emergency numbers.

5. When you are finished editing the number, press to save or the Right Soft Key

Emergency #s

Cancel

to cancel editing.

Save

3.4 Change Lock Code

Allows you to enter a new fourdigit lock code.

1. Press , , .

2. Enter the four-digit Lock Code and press .

3. Press

Code

4. Use to highlight an option, then press .

Phone Only Allows you to change the Lock Code used to lock/unlock the phone.

Call & Applications Allows you to change the Service Lock Code that is used to access the Restrictions menu (see page 73).

5. Enter a new four-digit Lock Code and press .

Change Lock

6. For confirmation, it will ask you to enter the new Lock Code again.

3.5 Reset Default

Allows you to reset your phone settings to the factory default settings.

1. Press , , .

2. Enter the four-digit Lock Code and press .

3. Press

4. Read the displayed message, then press to continue.

5. A message will pop-up. Use

then press .

Revert/

Reset Default

to highlight an option,

Cancel

Settings

4. Call Settings

The Call Settings menu allows you to designate how the phone handles both incoming and outgoing calls.

4.1 Answer Options

Allows you to determine how to answer an incoming call.

1. Press , , , .

2. Use to highlight a setting, then press .

Settings

Flip Open/Any Key/SEND

Key Only

Auto Answer

4.2 Auto Retry

Allows you to set the length of time the phone waits before automatically redialing a number when the attempted call fails.

1. Press , , , .

2. Use to highlight a setting, then press .

Off/Every 10 Seconds Every 30 Seconds/Every 60 Seconds

4.3 One-Touch Dial

Allows you to initiate a Speed Dial call by pressing and holding the Speed Dial digit. If set to Off, Speed Dial numbers designated in your Contacts will not function.

1. Press , , , .

2. Use to highlight a setting, then press .

On/Off

4.4 Voice Privacy

Allows you to set the voice privacy feature for CDMA calls as Enhanced or Standard. CDMA offers inherent voice privacy. Check with your service provider for availability.

1. Press , , , .

2. Use to highlight a setting, then press .

Enhanced/Standard

4.5 Airplane Mode

Turns off the wireless communications and allows you to use features on your phone that do not require wireless communications.

1. Press , , , .

2. Read the displayed message, then press to continue.

3. Use to highlight a setting, then press .

On/Off

4.6 TTY Mode

Allows you to attach a TTY (Teletype writer) device, enabling you to communicate with parties also using a TTY device. A phone with TTY support is able to translate typed characters to voice. Voice can also be translated into characters and then displayed on the TTY.

1. Press , , , .

2. Read the displayed message, then press to continue.

3. Use to highlight a setting, then press .

TTY Full/TTY + Talk/TTY +

TTY Off

Hear

Settings

5. System

The System menu allows you to designate specific system network settings.

5.1 Network

5.1.1 System Select

Allows you to set up the phone producer’s management environment. Leave this setting as the default unless you want to alter system selection as instructed by your service

Settings

provider.

1. Press , , , , .

2. Use to highlight

Only/ Automatic A/ Automatic B

Home

, then press .

5.1.2 Set NAM

Allows you to select the phone’s NAM (Number Assignment Module) if the phone is registered with multiple service providers.

1. Press , , , , .

NAM1

2. Use to highlight

NAM2

, then press .

5.1.3 Auto NAM

Allows the phone to automatically switch between programmed telephone numbers corresponding to the service provider area.

1. Press , , , ,

2. Use to highlight

Off

, then press .

5.1.4 Serving System

Identifies the Serving System Channel Number and SID Number. This information should only be used for technical support.

1. Press , , , , .

5.2 Location

Allows you to turn On or Off the Location function on your phone. If set to On, locationbased services are able to access your GPS (Global Positioning System) satellite-assisted location information.

1. Press , , , .

2. Use to highlight

setting,

then press .

Location On/E911 Only

Note

GPS satellite signals are not always transmitted, especially under bad atmospheric and environmental conditions, indoors, etc.

6. Memory

Allows you to check the memory status of your phone.

1. Press , , .

2. Use to highlight

Reserved Memory/ Multimedia

, then press .

7. Phone Info.

The Phone Info menu provides you with specific information pertaining to your handset.

1. Press , , .

2. Use to highlight an option and press .

My Number/ESN/MEID/ Icon Glossary/ Version

Settings

Safety

TIA Safety Information

The following is the complete TIA Safety Information for wireless handheld phones.

Exposure to Radio Frequency Signal

Your wireless handheld portable phone is a low power radio transmitter and receiver. When ON, it receives and sends out Radio Frequency (RF) signals.

In August, 1996, the Federal

Safety

Communications Commissions (FCC) adopted RF exposure guidelines with safety levels for handheld wireless phones. Those guidelines are consistent with the safety standards previously set by both U.S. and international standards bodies:

ANSI C95.1 (1992) *

NCRP Report 86 (1986)

ICNIRP (1996)

* American National Standards Institute; National Council on Radiation Protection and Measurements; International Commission on Non-Ionizing Radiation Protection.

Those standards were based on comprehensive and periodic evaluations of the relevant scientific literature. For example, over 120 scientists, engineers, and physicians from universities, government health agencies, and industry reviewed the available body of research to develop the ANSI Standard (C95.1).

The design of your phone complies with the FCC guidelines (and those standards).

Antenna Care

Use only the supplied or an approved replacement antenna. Unauthorized antennas, modifications, or attachments could damage the phone and may violate FCC regulations.

Phone Operation

NORMAL POSITION: Hold the phone as you would any other telephone with the antenna pointed up and over your shoulder.

Tips on Efficient Operation

For your phone to operate most efficiently:

Don’t touch the antenna unnecessarily when the phone is in use. Contact with the antenna affects call quality and may cause the phone to operate at a higher power level than otherwise needed.

Driving

Check the laws and regulations on the use of wireless phones in the areas where you drive and always obey them. Also, if using your phone while driving, please observe the following:

●

Give full attention to driving -driving safely is your first responsibility;

●

Use hands-free operation, if available;

●

Pull off the road and park before making or answering a call if driving conditions or the law require it.

Electronic Devices

Most modern electronic equipment is shielded from RF signals. However, certain electronic equipment may not be shielded against the RF signals from your wireless phone.

Safety

Pacemakers

The Health Industry Manufacturers Association recommends that a minimum separation of six (6) inches be maintained between a handheld wireless phone and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research by and recommendations of Wireless Technology Research.

●

Should turn the phone OFF immediately if there is any reason to suspect that interference is taking place.

Hearing Aids

Some digital wireless phones may interfere with some hearing aids. In the event of such interference, you may want to consult your service provider (or call the customer service line to discuss alternatives).

Persons with pacemakers:

Safety

●

Should ALWAYS keep the phone more than six (6) inches from their pacemaker when the phone is turned ON;

●

Should not carry the phone in a breast pocket;

●

Should use the ear opposite the pacemaker to minimize the potential for

interference;

Other Medical Devices

If you use any other personal medical device, consult the manufacturer of your device to determine if it is adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this information.

Health Care Facilities

Turn your phone OFF in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may use equipment that could be sensitive to external RF energy.

Vehicles

RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles. Check with the manufacturer or its representative regarding your vehicle. You should also consult the manufacturer of any equipment that has been added to your vehicle.

Posted Facilities

Turn your phone OFF in any facility where posted notices so require.

Aircraft

FCC regulations prohibit using your phone while in the air. Switch OFF your phone before boarding an aircraft.

Blasting Areas

To avoid interfering with blasting operations, turn your phone OFF when in a “blasting area” or in areas posted: “Turn off two-way radio”. Obey all signs and instructions.

Potentially Explosive Atmosphere

Turn your phone OFF when in any area with a potentially explosive atmosphere and obey all signs and instructions. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death.

Safety

Areas with a potentially explosive atmosphere are often, but not always marked clearly. Potential areas may include: fueling areas (such as gasoline stations); below deck on boats; fuel or chemical transfer or storage facilities; vehicles using liquefied petroleum gas (such as propane or butane); areas where the air contains chemicals or particles (such as grain, dust, or metal powders); and any other area where you would normally be advised to turn off your vehicle

Safety

engine.

For Vehicles Equipped with an Air Bag

An air bag inflates with great force. DO NOT place objects, including either installed or portable wireless equipment, in the area over the air bag or in

the air bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result.

Safety Information

Please read and observe the following information for safe and proper use of your phone and to prevent damage. Also, keep the user guide in an accessible place at all times after reading it.

CCaauuttiioonn!

instructions may cause minor or serious damage to the product.

●

Do not disassemble or open crush, bend or deform, puncture or shred.

●

Do not modify or remanufacture, attempt to insert foreign objects into the

Violation of the

battery, immerse or expose to water or other liquids, expose to fire, explosion or other hazard.

●

Only use the battery for the system for which it is specified.

●

Only use the battery with a charging system that has been qualified with the system per IEEE-Std-1725-2006. Use of an unqualified battery or charger may present a risk of fire, explosion, leakage, or other hazard.

●

Do not short circuit a battery or allow metallic conductive objects to contact battery terminals.

●

Replace the battery only with another battery that has been qualified with the system per this standard, IEEE-Std-1725-

2006. Use of an unqualified battery may present a risk of fire, explosion, leakage or other hazard.

●

Promptly dispose of used batteries in accordance with local regulations.

●

Battery usage by children should be supervised.

●

Avoid dropping the phone or battery. If the phone or battery is dropped, especially on a hard surface, and the user suspects damage, take it to a service center for inspection.

●

Improper battery use may result in a fire, explosion or other hazard.

●

The phone shall only be connected to USB products that bear the USB-IF logo or have completed the USB-IF compliance program.

Charger and Adapter Safety

●

The charger and adapter are intended for indoor use only.

Safety

●

Insert the battery pack charger vertically into the wall power socket.

●

Use the correct adapter for your phone when using the battery pack charger abroad.

●

Only use the approved battery charger. Otherwise, you may cause serious damage to your phone.

Battery Information and Care

●

Please dispose of your battery properly or take it to your

Safety

local wireless carrier for recycling.

●

The battery doesn't need to be empty before recharging.

●

Use only LG-approved chargers specific to your phone model since they are designed to maximize battery life.

●

Do not disassemble or shortcircuit the battery.

●

Keep the battery’s metal contacts clean.

●

Replace the battery when it no longer provides acceptable performance. The battery can be recharged several hundred times before replacement.

●

Recharge the battery after long periods of non-use to maximize battery life.

●

Battery life will vary due to usage patterns and environmental conditions.

●

Use of extended backlighting, Browser, and data connectivity kits affect battery life and talk/standby times.

●

The self-protection function of the battery cuts the power of the phone when its operation is in an abnormal state. In this case, remove the battery from the phone, reinstall it, and turn the phone on.

Explosion, Shock, and Fire Hazards

●

Do not put your phone in a place subject to excessive dust and keep the minimum required distance between the power cord and heat sources.

●

Unplug the power cord prior to cleaning your phone, and clean the power plug pin when it’s dirty.

●

When using the power plug, ensure that it’s firmly connected. If not, it may cause excessive heat or fire.

●

If you put your phone in a pocket or bag without covering the receptacle of the phone (power plug pin), metallic articles (such as a coin, paperclip or pen) may short-circuit the phone. Always cover the receptacle when not in use.

●

Don’t short-circuit the battery. Metallic articles such as a coin, paperclip or pen in your pocket or bag may shortcircuit the + and – terminals of the battery (metal strips on the battery) upon moving. Short-circuit of the terminal may damage the battery and cause an explosion.

●

Do not disassemble or crush the battery. It may cause a fire.

General Notice

●

Using a damaged battery or placing a battery in your mouth may cause serious injury.

●

Do not place items containing magnetic components such as a credit card, phone card, bank book, or subway ticket near your phone. The magnetism of the phone may damage the data stored in the magnetic strip.

Safety

●

Talking on your phone for a long period of time may reduce call quality due to heat generated during use.

●

When the phone is not used for a long period time, store it in a safe place with the power cord unplugged.

●

Using the phone in proximity to receiving equipment (i.e., TV or radio) may cause interference to the phone.

●

Do not use the phone if the antenna is damaged. If a damaged antenna contacts skin, it may cause a slight burn. Please contact an LG Authorized Service Center to replace the damaged antenna.

●

Do not immerse your phone in water. If this happens, turn it off immediately and remove the battery. If the phone does not work, take it to an LG Authorized Service Center.

●

Do not paint your phone.

●

The data saved in your phone might be deleted due to careless use, repair of the phone, or upgrade of the software. Please backup your important phone numbers. (Ring tones, text messages, voice messages, pictures, and videos could also be deleted.) The manufacturer is not liable for damage due to the loss of data.

●

When you use the phone in public places, set the ringtone to vibration so you don't disturb others.

●

Do not turn your phone on or off when putting it to your ear.

●

Use accessories, such as earphones and headsets, with caution. Ensure that cables are tucked away safely and do not touch the antenna unnecessarily.

Warning! Important safety information

Avoiding hearing damage

Permanent hearing loss may occur if you use your phone and/or headset at a high volume. Set the volume to a safe level. You can adapt over time to a higher volume of sound that may sound normal but can be damaging to your hearing. If you experience ringing in your ears or muffled speech, stop listening and have your hearing checked. The louder the volume, the less time is required before your hearing could be affected. Hearing experts suggest that to protect your hearing:

●

Limit the amount of time you use your phone and/or headset at high volume.

●

Avoid turning up the volume to block out noisy surroundings.

●

Turn the volume down if you can’t hear people speaking near you.

For information about how to set a maximum volume limit on your phone, see the features guide for your phone.

Using your phone safely

Use of your phone while operating a vehicle is not recommended and is illegal in some areas. Be careful and attentive while driving. Stop using your phone if you find it disruptive or distracting while operating any type of vehicle or performing any other activity that requires your full attention.

Safety

Using headsets safely

Use of headsets to listen to music while operating a vehicle is not recommended and is illegal in some areas. Be careful and attentive while driving. Stop using this device if you find it disruptive or distracting while operating any type of vehicle or performing any other activity that requires your full attention.

FDA Consumer

Safety

The U.S. Food and Drug Administration’s Center for Devices and Radiological Health Consumer Update on Mobile Phones:

Update

1. Do wireless phones pose a health hazard?

The available scientific evidence does not show that any health problems are associated with using wireless phones. There is no proof, however, that wireless phones are absolutely safe. Wireless phones emit low levels of Radio Frequency (RF) energy in the microwave range while being used. They also emit very low levels of RF when in standby mode. Whereas high levels of RF can produce health effects (by heating tissue), exposure to low level RF that does not produce heating effects causes no known adverse health effects. Many studies of low level RF exposures have not found any biological effects. Some studies have suggested that some biological effects may occur, but such findings have not been confirmed

by additional research. In some cases, other researchers have had difficulty in reproducing those studies, or in determining the reasons for inconsistent results.

2. What is the FDA's role concerning the safety of wireless phones?

Under the law, the FDA does not review the safety of radiationemitting consumer products such as wireless phones before they can be sold, as it does with new drugs or medical devices. However, the agency has authority to take action if wireless phones are shown to emit Radio Frequency (RF) energy at a level that is hazardous to the user. In such a case, the FDA could require the manufacturers of wireless phones to notify users of the health hazard and to repair, replace, or recall the phones so that the

hazard no longer exists.

Although the existing scientific data do not justify FDA regulatory actions, the FDA has urged the wireless phone industry to take a number of steps, including the following:

●

Support needed research into possible biological effects of RF of the type emitted by wireless phones;

●

Design wireless phones in a way that minimizes any RF exposure to the user that is not necessary for device function; and

●

Cooperate in providing users of wireless phones with the best possible information on possible effects of wireless phone use on human health.

The FDA belongs to an interagency working group of the federal agencies that have

Safety

responsibility for different aspects of RF safety to ensure coordinated efforts at the federal level. The following agencies belong to this working group:

●

National Institute for Occupational Safety and Health

●

Environmental Protection Agency

●

Occupational Safety and Health Administration

●

Safety

National Telecommunications and Information Administration

The National Institutes of Health participates in some interagency working group activities, as well.

The FDA shares regulatory responsibilities for wireless phones with the Federal Communications Commission

(FCC). All phones that are sold in the United States must comply with FCC safety guidelines that limit RF exposure. The FCC relies on the FDA and other health agencies for safety questions about wireless phones.

The FCC also regulates the base stations that the wireless phone networks rely upon. While these base stations operate at higher power than do the wireless phones themselves, the RF exposures that people get from these base stations are typically thousands of times lower than those they can get from wireless phones. Base stations are thus not the subject of the safety questions discussed in this document.

3. What kinds of phones are the subject of this update?

The term “wireless phone” refers here to handheld wireless phones with built-in antennas, often called “cell”, “mobile”, or “PCS” phones. These types of wireless phones can expose the user to measurable Radio Frequency (RF) energy because of the short distance between the phone and the user’s head.

These RF exposures are limited by FCC safety guidelines that were developed with the advice of the FDA and other federal health and safety agencies. When the phone is located at greater distances from the user, the exposure to RF is drastically lower because a person's RF exposure decreases rapidly with increasing distance from the source. The so-called “cordless phones,” which have a base unit

connected to the telephone wiring in a house, typically operate at far lower power levels, and thus produce RF exposures far below the FCC safety limits.

4. What are the results of the research done already?

The research done thus far has produced conflicting results, and many studies have suffered from flaws in their research methods. Animal experiments investigating the effects of Radio Frequency (RF) energy exposures characteristic of wireless phones have yielded conflicting results that often cannot be repeated in other laboratories. A few animal studies, however, have suggested that low levels of RF could accelerate the development of cancer in laboratory animals. However, many of the studies that showed increased tumor development used animals that

Safety

had been genetically engineered or treated with cancer-causing chemicals so as to be predisposed to develop cancer in the absence of RF exposure. Other studies exposed the animals to RF for up to 22 hours per day. These conditions are not similar to the conditions under which people use wireless phones, so we do not know with certainty what the results of such studies mean for human health. Three large epidemiology studies have been published since

Safety

December 2000. Between them, the studies investigated any possible association between the use of wireless phones and primary brain cancer, glioma, meningioma, or acoustic neuroma, tumors of the brain or salivary gland, leukemia, or other cancers. None of the studies demonstrated the existence of any harmful health effects from wireless phone RF exposures.

However, none of the studies can answer questions about longterm exposures, since the average period of phone use in these studies was around three years.

5. What research is needed to decide whether RF exposure from wireless phones poses a health risk?

A combination of laboratory studies and epidemiological studies of people actually using wireless phones would provide some of the data that are needed. Lifetime animal exposure studies could be completed in a few years. However, very large numbers of animals would be needed to provide reliable proof of a cancer promoting effect if one exists. Epidemiological studies can provide data that is directly applicable to human populations, but ten or more

years follow-up may be needed to provide answers about some health effects, such as cancer. This is because the interval between the time of exposure to a cancer-causing agent and the time tumors develop — if they do — may be many, many years. The interpretation of epidemiological studies is hampered by difficulties in measuring actual RF exposure during day-to-day use of wireless phones. Many factors affect this measurement, such as the angle at which the phone is held, or which model of phone is used.

6. What is the FDA doing to find out more about the possible health effects of wireless phone RF?

The FDA is working with the U.S. National Toxicology Program and with groups of investigators around the world to ensure that

high priority animal studies are conducted to address important questions about the effects of exposure to Radio Frequency (RF) energy.

The FDA has been a leading participant in the World Health Organization International Electro Magnetic Fields (EMF) Project since its inception in

1996. An influential result of this work has been the development of a detailed agenda of research needs that has driven the establishment of new research programs around the world. The project has also helped develop a series of public information documents on EMF issues.

The FDA and the Cellular Telecommunications & Internet Association (CTIA) have a formal Cooperative Research And Development Agreement (CRADA) to do research on

Safety

wireless phone safety. The FDA provides the scientific oversight, obtaining input from experts in government, industry, and academic organizations. CTIAfunded research is conducted through contracts with independent investigators. The initial research will include both laboratory studies and studies of wireless phone users. The CRADA will also include a broad assessment of additional research needs in the context of the latest research developments

Safety

around the world.

7. How can I find out how much Radio Frequency energy exposure I can get by using my wireless phone?

All phones sold in the United States must comply with Federal Communications Commission (FCC) guidelines that limit Radio

Frequency (RF) energy exposures. The FCC established these guidelines in consultation with the FDA and the other federal health and safety agencies. The FCC limit for RF exposure from wireless phones is set at a Specific Absorption Rate (SAR) of 1.6 watts per kilogram (1.6 W/kg). The FCC limit is consistent with the safety standards developed by the Institute of Electrical and Electronic Engineering (IEEE) and the National Council on Radiation Protection and Measurement. The exposure limit takes into consideration the body’s ability to remove heat from the tissues that absorb energy from the wireless phone and is set well below levels known to have effects. Manufacturers of wireless phones must report the RF exposure level for each model

of phone to the FCC. The FCC website (

http://www.fcc.gov/oet/rfsafety)

gives directions for locating the FCC identification number on your phone so you can find your phone’s RF exposure level in the online listing.

8. What has the FDA done to measure the Radio Frequency energy coming from wireless phones?

The Institute of Electrical and Electronic Engineers (IEEE) is developing a technical standard for measuring the Radio Frequency (RF) energy exposure from wireless phones and other wireless handsets with the participation and leadership of FDA scientists and engineers. The standard, “Recommended Practice for Determining the Spatial-Peak Specific Absorption

Rate (SAR) in the Human Body Due to Wireless Communications Devices: Experimental Techniques”, sets forth the first consistent test methodology for measuring the rate at which RF is deposited in the heads of wireless phone users. The test method uses a tissue-simulating model of the human head. Standardized SAR test methodology is expected to greatly improve the consistency of measurements made at different laboratories on the same phone. SAR is the measurement of the amount of energy absorbed in tissue, either by the whole body or a small part of the body. It is measured in watts/kg (or milliwatts/g) of matter. This measurement is used to determine whether a wireless phone complies with safety guidelines.

Safety

9. What steps can I take to reduce my exposure to Radio Frequency energy from my wireless phone?

If there is a risk from these products — and at this point we do not know that there is — it is probably very small. But if you are concerned about avoiding even potential risks, you can take a few simple steps to minimize your exposure to Radio Frequency (RF) energy. Since time is a key factor in how much exposure a person receives,

Safety

reducing the amount of time spent using a wireless phone will reduce RF exposure. If you must conduct extended conversations by wireless phone every day, you could place more distance between your body and the source of the RF, since the exposure level drops off dramatically with distance. For

example, you could use a headset and carry the wireless phone away from your body or use a wireless phone connected to a remote antenna. Again, the scientific data do not demonstrate that wireless phones are harmful. But if you are concerned about the RF exposure from these products, you can use measures like those described above to reduce your RF exposure from wireless phone use.

10. What about children using wireless phones?

The scientific evidence does not show a danger to users of wireless phones, including children and teenagers. If you want to take steps to lower exposure to Radio Frequency (RF) energy, the measures described above would apply to

LG Nite, MMBB0382401 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual