
Upgrading map N10
The product is made for upgrading map and navigation of N10.
Please read this instruction booklet carefully and completely
before connecting, operating or adjusting this product.
PND_ENG_MFL41647957

2
Step1: Installing the
Navigator “PC
Portal” software
1. Insert the Navigator CD into
the PC's CD-ROM drive. The
“PC Portal” Installation wizard prompts you to select
the language used for the
installation process. When
you have selected a language, click “OK”.
2. Read the Welcome message
and click “Next”.
3. From the Select Directory
screen, either accept the
recommended default directory or browse to a
different directory to install
the “PC Portal”.
Click “Next”.
4. If you want to change the
directory location before
installing, click “Back”. When
you are ready to install the
“PC Portal”, click “Next”.
5. When the installation is complete, click the “Finish” button.
Note
If the previous version of software had been installed in your
PC, please uninstall the previous one from your PC.
Step2: Connecting the
Navigator to a PC
1. Connect the Navigator to
your PC via USB cable provided with package.
2. Check the status of the USB
connection on the screen
displayed such like “Built-in
memory”.
Note
Please make sure that a SD
memory card is not inserted in
the Navigator.