LG myTouch Q, C800F Operator's Manual

LGC800F Operator’ s Guide

February 26, 1999

Terminal Research Institute Software Development Sector

Chan-yong Park

Terminal Development Center

1

LGIC

Call Status Functions

1. Memo (Menu Soft Key 1 + 1)

*

Function to store a telephone number while calling

l Select Menu + 1 and enter the telephone number to store.
l Press Store (Soft Key 2) key. (Name is not stored)

2. Record While Calling (Menu Soft Key 1 + 2)

*

Function to record the conversation while calling

3. MIC Volume Control (Menu Soft Key 1 + 2)

*

Function to control the sensitivity of MIC while calling

l You can select ‘ High’ or ‘ Low’

4. Fault Man Ring Back Feature (Menu Soft Key 1 + 4)

*

Function to transmit her/his own number while calling

l You can transmit your own number while calling by pressing menu Soft Key 1 + 4.

5. Volume Control (Soft Key2)

*

Function to control the volume while calling

l You can control the volume by pressing Soft Key 2.

Select the volume using the next setup key (Soft Key 1)

6. Mute Feature (DEL key)

*

Function to mute the speech voice while calling

l If you press DEL key, the speech tone is muted immediately.

If you want to deactivate this mute function, press DEL key again.

Terminal Development Center

2

LGIC

Stand-by Status Menu Set-up and Its Functions

1. Cion Secretary [Menu + 1]

*

Telephone Directory / Scheduler / Alarm / Call Reserve / World Time

1.1 Contact Secretary [Menu + 1 + 1 ]

1.1.1 Telephone Directory Register [Menu + 1 + 1 + 1 ]

1.1.2 Telephone Directory Search [Menu + 1 + 1 + 2 ]

1.1.3 Telephone Directory Delete [Menu + 1 + 1 + 3 ]

- See the manual on the telephone directory function.

1.2 Schedule Management Secretary [Menu + 1 + 2 ]

- See the manual on the diary function

1.3 Alarm Secretary [Menu + 1 + 3 ]
Alarm Time

* User can set an alarm to the desired time.

l Select Menu + 5 + 1.
l Select one of ‘ Release / Once / Daily’ .
l If you select ‘ Release’ , it becomes the state of stand-by. In case an alarm time was set previously,

that setting time will be deleted.

l When ‘ Once / Daily’ is selected, you just enter the alarm time in the order of hour and minute.
l In case the alarm time has been set already, the set alarm time and the soft keys of EDIT/OK are

displayed.

- If you select EDIT here, the soft key 1 of EDIT is displayed in ‘ AM’ or ‘ PM” mode for editing the
input.

l ‘ AM’ and ‘ PM’ mode can be switched with Soft Key1[AM/PM]
l You can edit the entered contents using DEL key.
l Press OK key to store the entered alarm time.

¢Ñ Note: The alarm bell is triggered at the set alarm time with the message of “Alarming Now”

displayed on the display.

¢Ñ Note: In case ‘ Once’ is selected, if the END key is pressed or 1minute is passed, the alarm time is
deleted.

Terminal Development Center

3

LGIC

1.4 Call Reservation Secretary [Menu + 1 + 4 ]
Call Reserve

* Function to originate a call to the reserved number automatically at the reserved time.

l Select Menu + 5+ 2.
l Enter the reservation time in the order of “Hour : Minute”.
l ‘ AM’ and ’ PM’ mode can be switched with Soft Key 1[AM/PM].
l Press OK key to store the entered reserved call time.
l Enter the reservation telephone number. [Up to 32 characters acceptable]
l Store the entered telephone number using STORE key.

¢Ñ Note: Telephone rings at the reserved time with the message of “Time for Reserved Call” on the
display.

¢Ñ Note: If the END key is pressed or one minute is passed, the reserved call time is automatically
deleted and stored in the last call list.

1.5 World Time Secretary [Menu + 1 + 4]
World Time

* Function to confirm the standard time of major cities in the world based on GPC time.

This function is available in CDMA mode only.

l Select Menu + 5 + 3.
l Select the city you want to check using ‘ Soft Key1’ or ‘ V/#’ key and press OK key.

Then, the international standard time of the selected city is appeared.

¢Ñ Cities applicable
Guam / New York / Dacca / Dallas / Denver / Delhi / Tokyo / Detroit / London / Rome / Los Angeles /
Lisbon / Riode Janeiro / Manila / Madrid / Mexico / Moscow / Montreal / Bangkok / Berlin / Beijing /
Beirut / Boston / Buenos Aires / Vienna / Sydney / Seattle / Chicago / Singapore / Athens / Abu Dhabi /
Ajoles / Amsterdam / Anchorage / Oakland / Washington / Jakarta / Jedda / Kabul / Cairo / Caracas /
Colombo / Kuwait / Taipei / Tehran / Paris / Hanoi / Helshinki / Honolulu / Hongkong

2. Volume Control [Menu + 1]

*

Function to control Ring / Key Tone / Call Volume

2.1 Receiver Volume Control [4-step + Mute]
l Select Menu + 1 + 1.

Terminal Development Center

4

LGIC

l Select the volume using the next setup key (Soft Key 1).
l Select the volume you want using V/# keys.
l Store the selected volume using the selection key.

2.2 Key Tone Volume Control [4-step + Mute]

l Select Menu + 1 + 2.
l Select the volume using the next setup key (Soft Key 1).
l Select the volume you want using V/# key.
l Store the selected volume using the selection key.

2.3 Volume Control [8-step + Low]

l Select Menu + 1 + 3.
l Select the volume using the next setup key (Soft Key 1).
l Select the volume you want using V/# key.
l Store the selected volume using the selection key.

3. Bell Selection [Menu + 2 ]

*

Function to select the bell type for the incoming call.

3.1 Types of Bell [Ring / Vibration / Vibration + Ring]

l Select Menu + 2 + 1.
l Select the bell type using the next setup key (Soft Key 1).
l Select the type of bell you want using V/# key.
l Store the selected status using the selection key.

3.2 Bell Selection (17 types)
[General / Sound of glass bead / Kung-tha-ri Shabara / Rise tone / Alarm tone / Chime bell / Code
tone / Tune of Japanese apricot tree / Pathetic sonata / Bolero of love/ Tune of bird / Father’ s
face / Small fountain / Edelweiss / A happy home / Nostalgia / Mail carriage]

l Select Menu + 2 + 2
l Select the type of bell using the next setup key (Soft Key 1).
l Select the bell you want using V/# key.
l Store the selected status using the selection key.

Terminal Development Center

5

LGIC

4. Call Time [Menu + 4]

*

Function to verify the record on the call time

4.1 Last Call Time

* Function to show the last call time

l Select Menu + 4 + 1.
l Press OK key to return to the stand-by state.

4.2 Total Call Time

* Function to show the number of call and the call time for all calls of receiving and transmitting.
User can verify the total number of calls made and the call time through this function.

l Select Menu + 4 + 2.
l If you select OK key (Soft Key2), it returns to the stand-by status and if you select DEL key (Soft

Key1), you can delete the accumulated total call time.

4.3 Originating Call Time

* Function to show the number of call and the call time for the originated calls.
User can verify the number of calls she/he originated and the call time through this function.

l Select Menu + 4 + 3.
l If you select OK key (Soft Key2), it returns to the stand-by status and if you select DEL key (Soft

Key1), you can delete the accumulated total call time.

5. Secret Function [Menu + 6 + Password 4-digit]

*

Lock mode setup / Call list delete / Private information delete / Voice list delete /
Emergency phone number store / Password change / International call restrict /
Automatic PIN transmit / Software version confirm functions can be performed in this menu.

5.1. Lock Mode

* Function to restrict the originating and storing functions.
* You can select ‘ Release / Power-On / Always’

l Press Menu + 6 + Password 4-digit + 1
l Select one of ‘ Release / Power-On / Always’ using ‘ Soft Key1’ or ‘ V/#’ key and press the store

key.

l If you select ‘ Always’ , the phone falls in the lock mode always, and [Select] menu and the calling

are locked.

Terminal Development Center

6

LGIC

- If you try to call in this case, you are prompted for the password and if the entered password is
identified, the call is established. In the lock mode, if you press [Locking Release] button, the
locking on the [Select] key is released and the [Locking Release] button is changed to [Select]
button.

- Even in this case, whenever you try to call, the password is required.

- If you want the locking release, you should release this setup from the [Menu].

l If you select ‘ Power-On’ , the locking function is not immediately executed but when the phone is

switched on, it is automatically set to the lock mode and at the same time, the soft key is changed
to [Menu], [Locking Release].

¢Ñ Default password is ‘ 0000’ .

5.2. Call List Delete

* Function to delete all the telephone numbers stored in the last call list.

l Select Menu + 6 + Password 4-digit + 2
l Select ‘ Yes’ from Yes/No using the next setup key (Soft Key1) or ‘ V/#’ key and press the

SELECT key.

5.3. Private Information Delete

* Function to delete all the contents stored in the memory address 01 ~ 200.

l Select Menu + 6 + Password 4-digit + 3.
l Select ‘ Yes’ from Yes/No using the next setup key (Soft Key1) or ‘ V/#’ key and press the

SELECT key.

¢Ñ During the deletion, a message of ‘ Please, wait’ appears and after the completion of the deletion
it returns to the stand-by status.

5.4 Voice List Delete

* Function to delete all the voice items (20 entities) from the memory addresses where voice is

stored of memory address 01 ~ 200.

l Select Menu +5+ Password 4-digit + 4.
l Select ‘ Yes’ from Yes/No using the next setup key (Soft Key1) or ‘ V/#’ key and press the

STORE key.

5.5. Emergency Phone Number Store

* Function used to enter the emergency telephone number [Up to 3 numbers ]