LG Multi V PRHR023, Multi V PRHR083, Multi V PRHR043, Multi V PRHR033, Multi V PRHR063 Installation Manual

INSTALLATION MANUAL
AIR CONDITIONER
www.lg.com
MFL32987320
Rev.01_011719
Please read this installation manual completely before installing the product. Installation work must be performed in accordance with the national wiring standards by authorized personnel only. Please retain this installation manual for future reference after reading it thoroughly.
[
Representative] LG Electronics Inc. EU Representative : LG Electronics European Shared Service Center B.V.
Krijgsman 1, 1186 DM Amstelveen, The Netherlands
[
Manufacturer] LG Electronics Inc. Changwon 2nd factory 84, Wanam-ro, Seongsan-gu, Changwon-si,
Gyeongsangnam-do, KOREA
PRHR083/PRHR063/PRHR043/PRHR033/PRHR023 (Heat Recovery Unit) Original instruction
Copyright © 2017 - 2019 LG Electronics Inc. All Rights Reserved.
РУССКИЙ ЯЗЫК
ENGLISH
УКРАÏНСЬКА
ITALIANO ESPAÑOL
ҚАЗАҚ ТІЛІ
БЕЛАРУСКАЯ МОВА
FRANÇAIS DEUTSCH
OZBEK TILI
ΕΛΛΗΝΙΚΆ
ČEŠTINA
NEDERLANDS
POLSKI
LIMBA ROMÂNĂ
TIPS FOR SAVING ENERGY
2
ENGLISH
TIPS FOR SAVING ENERGY
Here are some tips that will help you minimize the power consumption when you use the air conditioner. You can use your air conditioner more efficiently by referring to the instructions below:
• Do not cool excessively indoors. This may be harmful for your health and may consume more electricity.
• Block sunlight with blinds or curtains while you are operating the air conditioner.
• Keep doors or windows closed tightly while you are operating the air conditioner.
• Adjust the direction of the air flow vertically or horizontally to circulate indoor air.
• Speed up the fan to cool or warm indoor air quickly, in a short period of time.
• Open windows regularly for ventilation as the indoor air quality may deteriorate if the air conditioner is used for many hours.
• Clean the air filter once every 2 weeks. Dust and impurities collected in the air filter may block the air flow or weaken the cooling / dehumidifying functions.
For your records
Staple your receipt to this page in case you need it to prove the date of purchase or for warranty purposes. Write the model number and the serial number here:
Model number :
Serial number :
You can find them on a label on the side of each unit.
Dealer’s name :
Date of purchase :
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.
Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product
WARNING
!
It can result in serious injury or death when the directions are ignored
CAUTION
!
It can result in minor injury or product damage when the directions are ignored
WARNING
!
• Installation or repairs made by unqualified persons can result in hazards to you and others.
• The information contained in the manual is intended for use by a qualified service technician familiar with safety procedures and equipped with the proper tools and test instruments.
• Failure to carefully read and follow all instructions in this manual can result in equipment malfunction, property damage, personal injury and/or death.
3
ENGLISH
WARNING
!
• Have all electric work done by a licensed electrician according to "Electric Facility Engineering Standard" and "Interior Wire Regulations" and the instructions given in this manual and always use a special circuit.
- If the power source capacity is inadequate or electric work is
performed improperly, electric shock or fire may result.
• Ask the dealer or an authorized technician to install the HR unit.
- Improper installation by the user may result in water
4
ENGLISH
IMPORTANT SAFETY INSTRUCTIONS
leakage, electric shock, or fire.
• Always ground the product.
- There is risk of fire or electric shock.
• Make the connections securely so that the outside force of the cable may not be applied to the terminals.
- Inadequate connection and fastening may generate heat and
cause a fire.
• For re-installation of the installed product, always contact a dealer or an Authorized Service Center.
- There is risk of fire, electric shock, explosion, or injury.
• Do not install, remove, or re-install the unit by yourself (customer).
- There is risk of fire, electric shock, explosion, or injury.
• Do not store or use flammable gas or combustibles near the HR Unit.
- There is risk of fire or failure of product.
• Use the correctly rated breaker or fuse.
- There is risk of fire or electric shock.
• Do not damage or use an unspecified power cord.
- There is risk of fire, electric shock, explosion, or injury.
• Do not touch the power switch with wet hands.
- There is risk of fire, electric shock, explosion, or injury.
• Securely install the cover of control box and the panel.
- If the cover and panel are not installed securely, dust or
water may enter the HR unit and fire or electric shock may result.
• Be cautious when unpacking and installing the product.
- Sharp edges could cause injury. Be especially careful of the
case edges.
• Safely dispose of the packing materials.
- Packing materials, such as nails and other metal or wooden
parts, may cause stabs or other injuries.
- Tear apart and throw away plastic packaging bags so that
children may not play with them. If children play with a plastic bag which was not torn apart, they face the risk of suffocation.
IMPORTANT SAFETY INSTRUCTIONS
CAUTION
!
• Avoid a place where rain may enter since the HR unit is for indoor.
- There is risk of property damage, failure of product, or
electric shock.
• Do not install a HR unit in a space where persons exists such as living room, office or meeting room with not only low but also open ceiling.
• Always check for gas (refrigerant) leakage after installation or repair of product.
- Low refrigerant levels may cause failure of product.
• Keep level even when installing the product.
- To avoid vibration or water leakage.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not
play with the appliance.
• Means for disconnection must be incorporated in the fixed wiring in accordance with the wiring rules.
5
ENGLISH
TABLE OF CONTENTS
6
ENGLISH
TABLE OF CONTENTS
2 TIPS FOR SAVING ENERGY
3 IMPORTANT SAFETY INSTRUCTIONS
7 FEATURES
9 INSTALLATION PART
10 INSTALLATION
10 Selection of the best location
10 Dimensional drawings
13 HR Unit Installation
16 Insulation
17 Wiring Connection
18 HR Unit PCB
19 Setup the switch of HR Unit
26 COIL EXCHANGING METHOD
27 JOINT METHOD OF HR UNIT
FEATURES
Control Box
Connection Pipe (to outdoor unit)
Connection Pipe (to outdoor unit)
Connection Pipe (to indoor unit)
FEATURES
7
ENGLISH
Model
Max. Connectable No. of Indoor Units
Max. Connectable No. of Indoor Units of a branch
Nominal Input
Net. Weight
Dimensions (WxHxD)
Casing
Connecting Pipes
Sound Absorbing Insulation Material
Current
Power Supply
Cooling [W]
Heating [W]
kg
lbs
mm
Inch
Indoor side
Outdoor side
Minimum circuit Amps(MCA)
Maximum fuse Amps(MFA)
Liquid Pipe [mm]
Gas Pipe [mm]
Liquid [mm]
Low Pressure
[mm]
High Pressure
[mm]
PRHR023 PRHR033 PRHR043
16 24 32
88 8
39.8
37.2
14.9 16.7 18.2
32.8 36.8 40.1
786 X 218 X 657
30.9 X 8.6 X 25.9
Galvanized steel plate
Ø 9.52 – Ø 6.35
Ø 15.88 – Ø 12.7
Ø 9.52 Ø 12.7 Ø 15.88
Ø 22.2 Ø 28.58 Ø 28.58
Ø 19.05 Ø 22.2 Ø 22.2
Polyethylene Foam
0.17
15
220-240 V~ 50/60 Hz
8
Control Box
Connection Pipe (to outdoor unit)
Connection Pipe (to outdoor unit)
Connection Pipe (to indoor unit)
ENGLISH
FEATURES
Model
Max. Connectable No. of Indoor Units
Max. Connectable No. of Indoor Units of a branch
Nominal Input
Net. Weight
Dimensions (WxHxD)
Casing
Connecting Pipes
Sound Absorbing Insulation Material
Current
Power Supply
Cooling [W]
Heating [W]
kg
lbs
mm
Inch
Indoor side
Outdoor side
Minimum circuit Amps(MCA)
Maximum fuse Amps(MFA)
Liquid Pipe [mm]
Gas Pipe [mm]
Liquid [mm]
Low Pressure [mm]
High Pressure [mm]
PRHR063 PRHR083
48 64
88
75.9
72.1
27.2 30.7
60 67.7
1 113 X 218 X 657
43.8 X 8.6 X 25.9
Galvanized steel plate
Ø 9.52 – Ø 6.35
Ø 15.88 – Ø 12.7
Ø 15.88
Ø 28.58
Ø 22.2
Polyethylene Foam
0.27
15
220-240 V ~ 50/60 Hz
INSTALLATION PART
INSTALLATION PART
- Installation Manual
- Hanging bolts (4 x M10 or M8), Nut(8 x M10 or M8), Flat washers(8 x M10)
- Reducers
[Unit : mm(inch)]
9
ENGLISH
MOD els
HR unit reducer
PRHR023
PRHR033/ PRHR043/ PRHR063/ PRHR083
Liquid pipe
OD 15.88(5/8)
Ø 12.7(1/2)
OD 12.7(1/2) Ø 9.52(3/8)
Ø 6.35(1/4) OD 9.52(3/8)
Ø 9.52(3/8)
Gas pipe
High pressure
OD 19.05(3/4) Ø 15.88(5/8)
OD 12.7(1/2)
OD 22.2(7/8) Ø 19.05(3/4) Ø 15.88(5/8)
OD 15.88(5/8) Ø 12.7(1/2)
Ø 12.7(1/2)
Ø 9.52(3/8)
Low pressure
OD 22.2(7/8) Ø 19.05(3/4) Ø 15.88(5/8)
OD 15.88(5/8) Ø 12.7(1/2)
OD 28.58(1-1/8) Ø 22.2(7/8) Ø 19.05(3/4)
OD 19.05(3/4) Ø 15.88(5/8)
Loading...
+ 19 hidden pages