LG MDS714 Owner’s Manual [fr]

MDS714 (MDS714-A0U, MDS714V/C/S/W) MDT364 (MDT364-A0U, MDS364V/W) MDD264 (MDD264-A0U, MDS264V)

As an Energy Star® Partner, LG has determined that this product or product models meet the Energy Star® guidelines for energy efficiency.

Energy Star® is a U.S. registered mark.

PORTUGUÊS

ENGLISH

Français

P/NO : MFL41698458

MDS714-A0U_FOUANI_ENG_8458.indd 1 2009.2.25 5:26:24 PM

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING: Do not install this equipment in a confined space such as a book case or similar unit.

CAUTION: Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.

Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from over heating. The openings shall be never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product shall not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instruction has been adhered to.

CAUTION: This product employs a Laser System. To ensure proper use of this product, please read this owner’s manual carefully and

retain it for future reference. Shall the unit require maintenance, contact an authorized service center.

Use of controls, adjustments or the performance of procedures other than those specified herein may result in hazardous radiation exposure.

To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM.

CAUTION: The apparatus shall not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, shall be placed on the apparatus.

CAUTION concerning the Power Cord Most appliances recommend they be placed upon a dedicated circuit; That is, a

single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain.

Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized service center.

Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance.

To disconnect power from the mains, pull out the mains cord plug. When installing the product, ensure that the plug is easily accessible.

Safety Precaution

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

POWER: This unit operates on a mains supply of 200-240V, 50/60Hz. WIRING :

This unit is supplied with a BSI 1363 approved 13 amp mains plug, fused at 3 amp. When replacing the fuse always use a 3 amp BS 1362, BSI or ASTA approved type. Never use this plug with the fuse cover omitted. To obtain a replacement fuse cover contact your dealer. If the type of plug supplied is not suitable for the mains sockets in your home, then the plug should be removed and a suitable type fitted. Please refer to the wiring instructions below:

WARNING:

A mains plug removed from the mains lead of this unit must be destroyed.

A mains plug with bared wires is hazardous if inserted in a mains socket. Do not connect either wire to the earth pin, marked with the letter E or with the earth

symbol or coloured green or green and yellow. If any other plug is fitted, use a 3 amp fuse, either in the plug, or at the distribution

board.

IMPORTANT:

The wires in this mains lead are coloured in accordance with the fol-

lowing codes:

- BLUE: NEUTRAL, BROWN: LIVE - As the colours of the wires in the mains lead of this unit may not correspond with the coloured marking identifying the terminals in your plug, proceed as follows: The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black. The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red.

in NIGERIA

MDS714-A0U_FOUANI_ENG_8458.indd 2 2009.2.25 5:26:26 PM

Safety Precaution 2 Contents 3

Setting up 4 Hooking up the unit 5 Main Unit 6 Remote control 7 OSD Initial language setting - Optional 8 Initial Setting the Area Code 8 Adjust the general settings 8-10 Setting the sound mode 10-11 Setting the clock 11

Displaying Disc Information 12 Playing a Disc 12-14 Viewing photo files 14 Listening to the radio 15 Listening to the cassette tapes 15 Listening to music from your portable player

or external device 16 Using an USB device 16

Power Save Mode

You can set up the unit into an economic power save mode. In power-on status, press and hold

1/\

button for about 3 seconds.

- Nothing is displayed in the display window when the unit is turned off. To cancel, press

1/\

Recording to USB 17 Recording to TAPE 18 Synchronized Recording from CD to TAPE 18

Language Codes 19 Area Codes 19 Troubleshooting 20 Types of Playable Discs 21 Specifications 22

Contents

MDS714-A0U_FOUANI_ENG_8458.indd 3 2009.2.25 5:26:27 PM

Attaching the speakers to the unit

Setting up

Remote control Operation

Point the Remote Control at the display window and press the buttons.

Remote control Battery Installation 1 Detach the battery cover on the rear of the remote control

2 Insert the R03 (size AAA) battery with 3 and # aligned correctly.

Be careful of the following

• Be careful to make sure children not to put their hands or any objects into the *speaker duct.

* Speaker duct : A hole for plentiful bass sound on speaker cabinet (enclosure).

Grey

Red

Green

Orange

Blue

White

Rear

Front

Center

Sub Woofer

Rear

Front

Behind you and to your right.

In front of you, to the right of the screen.

Above screen, directly in front of you.

This can be placed in any front position.

Behind you and to your left.

In front of you, to the left of the screen.

POSITION

SPEAKER

COLOUR

Connect the black end of each wire to the terminals marked - (minus) and the other end to the terminals marked + (plus). To connect the cable to the each speakers, press each plastic finger pad to open the connection terminals on the back of each speaker. Insert the wire and release the finger pad.

MDS714 (5.1 channel)

Red

White

Orange

Front

Sub Woofer

In front of you, to the right of the screen.

In front of you, to the left of the screen.

This can be placed in any front position.

POSITION

SPEAKER

COLOUR

MDT364 (2.1 channel)

Red

White

Front

In front of you, to the right of the screen.

In front of you, to the left of the screen.

POSITION

SPEAKER

COLOUR

MDD264 (2 channel)

MDS714-A0U_FOUANI_ENG_8458.indd 4 2009.2.25 5:26:28 PM

Hooking up the unit

COMPONENT VIDEO OUT (PROGRESSIVE SCAN) jacks connection

Connect one end of the component(Y PB PR) cable to the COMPONENT VIDEO OUT (PROGRESSIVE SCAN) jack on the unit and other end to the COMPONENT INPUT jack on your TV.

VIDEO OUT jack connection

Connect the VIDEO OUT jack on the unit to the corresponding input jacks on your TV using a Video cable.

AUX IN (L/R) jacks connection

Connect a VCR or Auxiliary device, etc. to the INPUT jack of this unit.

Press the FUNCTION button on the remote control until the “AUX” indicator is displayed in the display window.

Antenna connection

Fit the AM loop aerial to its stand

Connect the AM loop aerial to the unit.

Connect the FM aerial

The reception will be at its best when the two loose ends of the aerial are in a straight line and horizontal.

MDS714-A0U_FOUANI_ENG_8458.indd 5 2009.2.25 5:26:29 PM

1/\ Turn ON/ OFF.

Display window

Disc tray

- z/\\ Recording/Pauses

- ./> REWIND or FAST FORWARD Auto Tuning/ SCAN/ Setting clock

- b/B PRESET FORWARD/ REVERSE PLAY

- x Stop

USB direct recording

PRO EQ

BASS (100 Hz)/ MIDDLE (1 KHz)/ TREBLE (10 KHz)

CD OPEN

DISC SKIP

Choose a desired disc.

DUBB. Recording from tape to tape.

CD SYNC. CD to Tape Synchronized.

ST./MO. To improve the FM reception

on TUNER.

SET Confirms the settings.

(TIMER/ CLOCK/ PRO EQ)

CD II Pauses

REV. MODE

Scroll through a selection of cassette playing options. DEMO In power off state to demonstrate the function on display window. To cancel it, press 1/\ or this button again.

AUX/PORT.

Auxiliary device/ Portable in.

Main unit

Selects TUNER function.

Selects TAPE function.

Selects DVD/CD function.

Selects USB function.

PRO EQ

Volume control

19 20

Cassette Door 1, 2

TIMER

(

Use your player as an alarm clock.)

CLOCK (

See setting the Clock )

23 24

EQ./LG EQ

You can choose fixed sound impression.

25 XDSS plus

Reinforce the treble, bass and surround effect.

USB connector

PHONES Headphone jack

PORT. IN For connecting a portable

device and playing it through this system’s speakers.

29 30

MIC 1, 2

ECHO VOL. U/u

Adjust microphone echo volume.

MIC VOL. U/u

Adjust microphone volume.

1 2 43 5

26 27 28 29 30

31 32

MDS714-A0U_FOUANI_ENG_8458.indd 6 2009.2.25 5:26:34 PM

Remote control

POWER: Switches the unit ON or OFF.

FUNCTION: Changes the function. SLEEP:

Sets the System to turn off automatically at a specified time. (Dimmer : Dims the LED (Light-emitting diode) of front panel by half in power-on status.)

Z OPEN/CLOSE: Open or close your CD door. TITLE: If the current DVD title has a menu, the title menu

appears on the screen. Otherwise, the disc menu may appear.

DISPLAY: Accesses On-Screen Display. MENU: Accesses the menu on a DVD disc. SETUP: Accesses or removes setup menu.

I i U u (left/right/up/down): Used to navigate on-screen displays.

ENTER: Acknowledges menu selection. PRESET (U u): Selects programme of Radio.

TUN. +/- (I i): Tunes in the desired radio station.

RETURN (O): Moving back wards in the menu. REC (z): Recording to USB/ TAPE. STOP (x): Stops playback or recording. PLAY (B): Starts playback. MO./ST.: MONO/STEREO FM mode state, selects MONO

or STEREO by pressing this button.

PAUSE/STEP(X): Pausing playback. SCAN(bb/BB): Search backward or forward.

SKIP(./>): Go to next or previous chapter/track/Title.

D.SKIP: Choose a desired disc. MUTE: To mute the sound. VOL (Volume) +/-: Adjusts speaker volume. EQ/ LG EQ (

EQUALIZER Effect): You can choose sound

impressions.

0-9 numerical buttons: Selects numbered options in a menu. REPEAT/RANDOM : To select a play mode. (Random,

repeat) SUBTITLE: During playback, you can select a desired

subtitle language.

TV Control buttons : Controls the TV. (LG TV only)

PROG./MEMO.: Accesses or removes Program menu. MIC VOL.(+/ - ): Adjusts microphone volume. ECHO VOL.(+/ - ): Adjusts echo volume. VOCAL FADER: You can enjoy the function as karaoke, by

reducing singer vocal of music in the various source.

CLEAR: Removes a track number on the Program List.

Controlling the TV.

You can control the sound level, input source, and power switching of LG TVs as well. Hold POWER (TV) and press PR/CH (+/–) button repeatedly until the TV turns on or off.

1 3

MDS714-A0U_FOUANI_ENG_8458.indd 7 2009.2.25 5:26:36 PM

Adjust the general settings

ON REMOTE

1 Display setup menu SETUP

2 Select a desired option on the first level

U u

3 Move to second level

4 Select a desired option on the second level

U u

5 Move to third level

6 Change the setting U u and ENTER

OSD Initial language setting - Optional

1 Turn the power on

The language list appears POWER

2 Select the language

U u I i

3 Press ENTER

4 To confirm press

I i and ENTER

During the first use of this unit, the initial language setup menu appears on your TV screen. You must complete initial language selection before using the unit. English will be selected as the initial language.

ON REMOTE

Initial Setting the Area Code

1 Display setup menu SETUP

2 Select LOCK menu on the first level

U u

3 Move to second level

The activated Area Code appears on the second level.

4 Move to the third level

5 Enter a new password numerical buttons

(0-9) and ENTER

6 Recheck the entered new password numerical buttons

(0-9) and ENTER

7 Select a code for a geographic area

After select, Rating and Password will be

U u I i and

activated. (page 19) ENTER

8 To confirm what you press

Make sure to finish setting the Area Code before leaving the setup menu if you cannot set the rating and Password

ENTER

When you use this unit for the first time, you have to set the Area Code as shown below.

ON REMOTE

Adjust the general settings - More you can do

Adjust the language settings

OSD – Selects a language for the Setup menu and on-screen display.

Disc Audio/ Disc Subtitle/ Disc Menu –

Selects a language for the Audio/ Menu/ Subtitle.

[Original]: Refers to the original language in which the disc was recorded. [Others]: To select another language, press number buttons then ENTER to

enter the corresponding 4-digit number according to the language code list in the reference chapter. Refer to the language code on Page 19.

[OFF] (for Disc Subtitle): Turn off Subtitle.

MDS714-A0U_FOUANI_ENG_8458.indd 8 2009.2.25 5:26:37 PM

Adjust the display settings

TV Aspect – Select which screen aspect to use based on the shape of your TV

screen.

[4:3]: Select when a standard 4:3 TV is connected. [16:9]: Select when a 16:9 wide TV is connected.

Display Mode –

If you selected 4:3, you’ll need to define how you would like widescreen programs and films to be displayed on your TV screen.

[Letterbox]: This displays a widescreen picture with black bands at the top

and bottom of the screen.

[Panscan]: This fills the entire 4:3 screen, cropping the picture as necessary

Progressive Scan

Progressive Scan Video provides the high quality pictures with less flickering. If you are using the Component Video jacks for connection to a TV or monitor that is compatible with a progressive scan signal, set [Progressive Scan] to [On]. Press ENTER to confirm your selection

- If you not press ENTER within 10 seconds it will be [OFF].

Adjust the audio settings

DRC (Dynamic Range Control) – Make the sound accurate when the volume

is turned down (Dolby Digital only). Set to [On] for this effect.

Vocal – Select [On] to mix karaoke channels into normal stereo. This function is

effective for multi-channel karaoke DVDs only.

5.1 Speaker Setup (MDS714)

ON REMOTE

1 Open the settings menu SETUP

2 Select the audio icon

U u

3 Select right to enter the audio menu, then

select 5.1 Speaker Setup i ENTER

4 Select the speaker you want to adjust

I i

5 Select an option and change the settings

U u I i

6 Set the output level (volume) of a speaker

from -5dB to +5dB. I i

7 If you connect speakers to your unit,

setting the Distance lets the speakers to know how far the sound has to travel to reach your set listening point. This allows the sound from each speaker to reach the listener at the same time.

I i

8 Test the signals of each speaker

Adjust the volume to your taste according to these signals. I i

9 Save your settings and exit the Setup

menu O RETURN

MDS714-A0U_FOUANI_ENG_8458.indd 9 2009.2.25 5:26:37 PM

Adjust the lock settings

To access the lock options, you must enter the 4-digit password. If you have not yet entered a password you are prompted to do so. Enter a 4-digit password. Enter it again to verify. If you make a mistake while entering number, press CLEAR to delete numbers then correct it.

If you forget your password you can reset it. Press SETUP and Input ‘210499’ and press ENTER. The password has now been cleared.

Area code – Select a code for a geographic area as the playback rating level.

This determines which area’s standards are used to rate DVDs controlled by the parental lock. See the Area Codes on Page 19.

Rating – Select a rating level. The lower the level, the stricter the rating. Select

[UNLOCK] to deactivate the rating.

Password – Sets or changes the password for lock settings.

[New]: Enter a new 4-digits password using the numerical buttons then press

ENTER. Enter the password again to confirm.

[Change]: Enter the new password twice after entering the current password.

Adjust the others settings

DivX (R) Registration - We provide you with the DivXR VOD (Video on

demand) registration code that allows you to rent and purchase videos using the DivXR VOD service. For more information, visit www.divx.com/vod. Press ENTER when [Select] icon is highlighted and you can view the registration code of the unit.

Semi Karaoke -

When a chapter/ title/ track is fully finished, this function shows the score in the screen with a fanfare sound.

Setting the sound mode

PRO EQ

1 Press PRO EQ. 2 “PRO EQ” is displayed. 3 Select the sound effect you want among BASS (100 Hz), MIDDLE (1 kHz),

TREBLE (10 kHz).

4 Adjust sound level turning each band control knob. 5 To finish the setting, press SET/CD II.

- This function is not available when a microphone is connected.

VOCAL FADER

You can enjoy the function as karaoke, by reducing singer vocal of music in the various source. (MP3/ WMA/ CD/ Dolby Digital/ etc.) Press the VOCAL FADER, and “FADE ON” will appear in display window. To cancel it, press VOCAL FADER again.

- This function is available to use only when a microphone is connected.

- The quality of the VOCAL FADER may be different depending on the recording conditions of music files.

- It is not available on the MONO mode.

MDS714-A0U_FOUANI_ENG_8458.indd 10 2009.2.25 5:26:37 PM

Using your player as an alarm clock

Press and hold TIMER. Each functions flashes(Ex. TUNER, USB, ...)

2 Press SET when the function you want to be woken by is showing.

If you choose TUNER, “PLAY” and “REC” flashes in the display window alternately.

3 Choose one of them by pressing the SET. 4 “ON TIME” will be displayed. This is where you set the time you want the

alarm to start. Use ./> to change the hours and minutes and SET to save.

5 The “OFF TIME” will be displayed. This is where you set the time you

want the function to stop.

6 Use ./> to change the hours and minutes and press SET to save. 7 You will be shown the volume (VOL) you want to be woken by. Use

./> to change the volume and SET to save. Switch the system off.

The clock icon “ ” shows that the alarm is set.

8 When the system is turned off you can check the time the alarm and turn

the alarm on and off by pressing TIMER.

Fall asleep while listening to your player

Press SLEEP one or more times to select delay time between 10 and 180 minutes, after the player will turn off. To check the remaining time, press SLEEP.

Enjoying a pre-programmed sound field

The system has a number of pre-set surround sound fields. You can select a desired sound mode by using EQ/ LG EQ. The displayed items for the Equalizer may be different depending on sound sources and effects.

NATURAL You can enjoy comfortable and natural sound. Local Regionally optimized sound effect.(DANGDUT/ ARABIC/

Specialization PERSIAN/ INDIA/ REGUETON/ MERENGUE/ SAMBA/ equalizer SALSA)

AUTO EQ Realizes the sound equalizer that is the most similar to the

genre of which is included in the MP3 ID3 tag of song files.

POP This program lends an enthusiastic atmosphere to the CLASSIC sound, giving you the feeling you are at an actual rock ROCK , pop, jazz or classic concert. JAZZ

MP3 OPT This function is optimized for compressible MP3/WMA file.

It improves the bass sound.

XDSS ON Reinforce the treble, bass and surround sound effect. VIRTUAL You can enjoy more virtual surround sound. NORMAL(OFF) You can enjoy the sound without equalizer effect. PLII MOVIE Dolby Pro Logic II enables you to play stereo source on

PLII MUSIC 5.1-channel. PLII MTRX(matrix)

ON DISPLAY Description

Setting the Clock

1 Turn the power on 2 Press for at least 2 seconds 3 Choose from either

AM 12:00 (for an AM and PM display) or 0:00 (for a 24 hour display)

4 Confirm your selection 5 Select the hours 6 Press 7 Select the minutes 8 Press

ON PLAYER

1/ |

CLOCK

./>

SET

./>

SET

./>

SET

MDS714-A0U_FOUANI_ENG_8458.indd 11 2009.2.25 5:26:38 PM

Displaying Disc Information - More you can do

You can select an item by pressing U u and change or select the setting by pressing I i.

urrent title (or track/ file)

number/total number of titles (or tracks/ files)

Current chapter number/total number of chapters Elapsed playing time Selected audio language or channel

Selected subtitle Selected angle/total number of angles

Selected

Sound/EQ mode

Symbol Used in this Manual

All discs and file listed below

ALL

MP3 files

MP3

DVD and finalized DVD±R/RW

DVD

WMA files

WMA

DivX files

DivX

Audio CDs

ACD

Displaying Disc Information

1 Press DISPLAY

2 Select an item

U u

3 Adjust the Display menu settings

I i

4 To return the exit DISPLAY

ON REMOTE

Playing a Disc - More you can do

Playing a DVD that has a menu

DVD

Most DVDs now have menus which load first before the film begins to play. You can navigate these menus using I i U u to highlight an option. Press ENTER to select.

Skipping to the next/previous chapter/ track/ file

ALL

Press > to move to the next chapter/ track/ file. Press . to return to the beginning of the current chapter/ track/ file. Press . twice briefly to step back to the previous chapter/ track/ file.

Pausing a playback

ALL

Press PAUSE/STEP (X) to pause playback. Press B to continue playback.

Frame-by-Frame playback

DVD DivX

Press PAUSE/STEP (X) repeatedly to play Frame-by-Frame playback.

Playing repeatedly or randomly

ALL

1 Press REPEAT/RANDOM repeatedly. The current track/ file will be played

back repeatedly or randomly.

2 To return to normal playback, press REPEAT/RANDOM repeatedly to select

[Off].

Selecting a subtitle language

DVD DivX

During playback, press SUBTITLE on the remote control repeatedly.

Fast forward or fast reverse

ALL

1 Press m or M on remote control during playback. 2 You can change the various playback speed by pressing m or M

repeatedly.

3 Press B to continue play at normal speed.

Playing a Disc

ON REMOTE

1 Open the disc tray

2 Insert a disc

3 Close the disc tray

4 To Start playback

5 To stop playback

Z OPEN/CLOSE

B x

ON PLAYER

CD OPEN

B x

MDS714-A0U_FOUANI_ENG_8458.indd 12 2009.2.25 5:26:40 PM

1.5 times faster playback

DVD

1 Press B when a disc is already playing to watch and listen. 2 B x1.5 will appear on the screen. 3 Press B again to return to normal playback speed.

Slow down the playing speed

DVD DivX

1 While playback is paused, press m/M. 2 You can change the various playback speed by pressing m/M repeatedly. 3 Press B to continue play at normal speed.

Starting play from selected time

DVD DivX

Searches for the starting point of entered time code.

1 Press DISPLAY then select clock icon. and then press ENTER. 2 Enter a time then press ENTER.

For example, to find a scene at 1 hour, 10 minutes, and 20 seconds, enter “11020” by using numerical buttons and press ENTER. If you enter the wrong number, press CLEAR to enter again.

Last Scene Memory

DVD

This unit memorizes last scene from the last disc that is viewed. The last scene remains in memory even if you remove the disc from the player or switch off the unit. If you load a disc that has the scene memorized, the scene is automatically recalled.

Screen Saver

The screen saver appears when you leave the unit in Stop mode for about five minutes.

System Select - Optional

You must select the appropriate system mode for your TV system. In DVD/CD fanction, remove any disc that might be in the unit, press and hold PAUSE/STEP (X) for more than five seconds to be able to select a system (PAL, NTSC, AUTO).

Mixed disc or USB Flash Drive – DivX, MP3/WMA and JPEG

When playing a disc or USB Flash Drive contained with DivX, MP3/WMA and JPEG files together, you can select file type with MENU button on the remote control.

Changing the character set to display DivX® subtitle correctly

DivX

1 If the subtitle dose not display properly, press and hold SUBTITLE about 3

seconds to display the language code menu.

2 Press SUBTITLE repeatedly to change the language code until the subtitle is

displayed properly.

DivX disc compatibility with this player is limited as follows

DivX

• Available resolution size of the DivX file is under 800x600 (W x H) pixel.

• The file name of the DivX subtitle is available by 45 characters.

• If there is impossible code to express in the DivX file, it may be displayed as

“ _ ” mark on the display.

•

If the number of the screen frame is over 30 per 1 second, this unit may not operate normally.

• If the video and audio structure of recorded files are not interleaved, either video or audio is outputted.

Playable DivX file : “.avi ”, “.mpg ”, “.mpeg ”, “.divx” Playable Subtitle format : SubRip(*.srt/*.txt) ,SAMI(*.smi), SubStation

Alpha(*.ssa/*.txt) MicroDVD(*.sub/*.txt) SubViewer 2.0(*.sub/*.txt) VobSub(*.sub) Playable Codec format : “DIVX3.xx ”, “DIVX4.xx ”, “DIVX5.xx ”, “MP4V3 ”, “3IVX ”. Playable Audio format : “AC3 ”, “PCM ”, “MP3 ”, “WMA ”.

MDS714-A0U_FOUANI_ENG_8458.indd 13 2009.2.25 5:26:40 PM

Creating your own program

WMA MP3

You can play the contents of a disc in the order you want by arranging the order of the songs on the disc. The program is cleared when the disc is removed. 1 Select a desired music then press PROG./MEMO. or select “ ” and then

press ENTER to add the music to the program list.

2 To add all music in the disc, select “ ” and then press ENTER. 3 Select a music from the program list then press ENTER to start programmed

playback.

4 To clear a music from the program list, select the music you want to clear

then press CLEAR or select “” icon and then press ENTER. To clear all music from the program list, select “ ” then press ENTER.

Displaying file information (ID3 TAG )

MP3

While playing a MP3 file containing file information, you can display the information or time by pressing DISPLAY repeatedly.

MP3 / WMA disc compatibility with this player is limited as follows

WMA MP3

• Sampling frequency: within 32 - 48 kHz (MP3/ WMA)

• Bit rate: within 32 - 320kbps (MP3), 40 - 192kbps (WMA)

• The unit cannot read an MP3/WMA file that has a file extension other than “.mp3” / “.wma”.

• CD-R physical format should be ISO 9660 LEVEL 1/ JOLIET

• If you record MP3 / WMA files using software that cannot create a file system (eg. Direct-CD) it is impossible to playback MP3 / WMA files. We recommend that you use Easy-CD Creator, which creates an ISO 9660 file system.

• File names should have a maximum of 8 letters and must incorporate an .mp3 or .wma extension.

• They should not contain special letters such as / ? * : “ < > l etc.

• The total number of files on the disc should be less than 999.

This unit requires discs and recordings to meet certain technical standards in order to achieve optimal playback quality. Pre-recorded DVDs are automatically set to these standards. There are many different types of recordable disc formats (including CD-R containing MP3 or WMA files) and these require certain pre-existing conditions (see above) to ensure compatible playback.

Customers should note that permission is required in order to download MP3 / WMA files and music from the Internet. Our company has no right to grant such permission. Permission should always be sought from the copyright owner.

Viewing photo files

ON REMOTE

1 Open the disc tray

2 Insert a Disc

3 Close the disc tray

4 Select a photo file on

the menu

5 Display the selected

file in full screen

6 To stop playblack

CD OPEN

Z OPEN/CLOSE

U u

ENTER

ON PLAYER

Viewing photo files - More you can do

Viewing photo files as a slide show

1 Use I i U u to highlight ( ) icon then press ENTER to start slide show. 2 You can change slide show speed (3, 5, 8 seconds) using I i when ( )

icon is highlighted.

Skipping to the next/previous photo

Press . or > to view the previous/next photo.

Rotating a photo

Use U u to rotate the photo in full screen.

Pausing a slide show

1 Press PAUSE/STEP (X). 2 Press B or X to continue the slide show.

JPEG disc compatibility with this player is limited as follows:

• Normal: 5120 x 3840, Progressive: 2043 x 1536

• Recording condition: ISO9660 LEVEL 1/ JOLIET

• Maximum files : Under 999.

• Some discs may not operate due to a different recording format or the condition of disc.

• File extensions: “.jpg

MDS714-A0U_FOUANI_ENG_8458.indd 14 2009.2.25 5:26:42 PM

Listen to the cassette tapes - More you can do

Playing Fast backward or Forward

After pressing ./> (bb/BB on the remote control) during playback, press B at a point you want.

Auto Reverse Deck 1 Press TAPE to select “TAPE-2”.

You can set the tape to play one side , both sides one time , or both sides repeatedly , by pressing REV. MODE one or more times.

Dubbing

This function allows you to record from tape to tape.

1 Press TAPE to select “TAPE-1”. 2 Insert the tape as follows.

TAPE1 - Insert a playback tape to dub. TAPE2 - Insert a blank tape.

3 Press DUBB. “DUBBING” shows. Dubbing starts. 4 To stop dubbing, press x.

Listening to the cassette tapes

1 Open the tape door 2 Insert the tape 3 Close the tape door 4 Select the TAPE function 5 Start the tape playing 6 To stop a tape playing

ON PLAYER

Z PUSH EJECT

TAPE

ON REMOTE

FUNCTION

B x

Listening to the radio - More you can do

Looking for radio stations automatically

Press ./>

on the front panel (

TUN.- /TUN.+ on the

remote control)

for more than 0.5 second. The tuner will scan automatically and stop when it finds a radio station.

Deleting all the saved stations 1 Press and hold PROG./MEMO. “ERASE ALL” shows.

2 Press PROG./MEMO. to erase all the saved stations.

Improving poor FM reception

Press PLAY (B) (MO./ST.) on the remote control. This will change the tuner from stereo to mono and usually improve the reception.

Listening to the radio

1 Select FM/ AM

2 Select the radio station

3 To ‘save’ a radio station

A preset number will show in the display.

4 Select the preset number

5 To confirm

press Up to 50 radio stations can be saved

6 To select a ‘saved’ station

press

TUNER

./>

b / B

FUNCTION

TUN. +/-

PROG./MEMO.

PRESET U u

PROG./MEMO.

PRESET U u

ON PLAYER

ON REMOTE

MDS714-A0U_FOUANI_ENG_8458.indd 15 2009.2.25 5:26:43 PM

Listening to music from your portable player or external device

The unit can be used to play the music from many types of portable player or external device.

1 Connect the portable player to the

PORT.IN(PORTABLE IN) connector of

the unit.

Connect the external device to the AUX

connector of the unit. > If your TV has only one output for

audio(MONO), connect it to the left(white) audio jack on the unit.

2 Turn the power on.

3 Select the PORTABLE or AUX

function.

Turn on the portable player or external device and start it playing.

1/ |

AUX PORT.

POWER

FUNCTION

ON PLAYER ON REMOTE

PORT. IN (PORTABLE IN)

Your unit

VCR, TV, ...

Using an USB device

ON PLAYER ON REMOTE

You can enjoy media files saved on an USB device by connecting the USB device to the USB port of the unit. If you want to operate other function, see the CD playback section.

1 Connect the USB device to the USB

port of the unit.

2 Select the USB function.

3 Select a file you want to play.

4 Start your media playing.

5 To stop, press

6 Before disconnecting the portable

USB device, change to any other function.

USB

./>

TUNER/TAPE/...

FUNCTION

U u

B / ENTER

FUNCTION

Compatible USB Devices

• MP3 Player : Flash type MP3 player.

• USB Flash Drive : Devices that support USB 2.0 or USB 1.1.

• This USB Function may not be available depending on devices.

USB device requirement

• Devices which require additional program installation when you have connected it to a computer, are not supported.

Look out for the follows.

• Do not extract the USB device while in operation.

• For a large capacity USB, it may take longer than a few minute to be searched.

• To prevent data loss, back up all data.

• If you use a USB extension cable or USB hub, the USB device is not recognized.

• Using NTFS file system is not supported. (Only FAT(16/32) file system is supported.

• This unit is not supported when the total number of files is 1000 or more.

• External HDD, Locked devices or hard type USB devices are not supported.

• The unit can not be used as a storage device.

• USB port of the unit can not be connected to PC.

MDS714-A0U_FOUANI_ENG_8458.indd 16 2009.2.25 5:26:44 PM

Recording to USB

You can record a various sound source to USB.

1 Connect the USB device to the unit.

2 Select a mode in which you want to

record. (TUNER/ CD/ ....)

Play back a sound source first.

3 Start the recording.

> If you press the button on the remote

control, the display changed in the following order, “USB REC” <-> “TAPE REC”. Then press the button on “USB REC” once more.

4 To stop recording, press :

ON PLAYER ON REMOTE

TUNER/TAPE/...

R (USB REC)

FUNCTION

z REC

Recording to USB - More you can do

Recording Music file in disc source to USB

One track recording

If the USB recording is played during playback of the CD, the one track/ file would be recording into the USB.

All tracks recording

If the recording button is pressed at the CD stop, all tracks/ files would be recording.

Program list recording

USB records after creating your own program if you want to record the track you want (Audio CD only).

When you are recording, look out for the following

• You can check the recording percentage rate for the USB record on the

screen during the recording. (AUDIO, MP3/ WMA CD only)

• During recording MP3/ WMA, there is no sound.

• When you stop recording during playback, the file that has been recorded at

that time will be stored.(Audio CD only)

• Do not remove the USB device or turn off during USB recording. If not, an

incomplete file may be made and not deleted on PC.

• Recording through microphones is not available.

• If USB recording does not work, the message like “NO USB”, “ERROR”,

“USB FULL” or “NO REC” is displayed on the display window.

• The file number is saved automatically.

•

It’ll be stored as follows.

The making of unauthorized copies of copy-protected material, including

computer programs, files, broadcasts and sound recordings, may be an

infringement of copyrights and constitute a criminal offence.

This equipment should not be used for such purposes.

Be responsible

Respect copyrights

AUDIO CD

MP3/ WMA

the other sources

MDS714-A0U_FOUANI_ENG_8458.indd 17 2009.2.25 5:26:45 PM

Recording to TAPE

You can record a various sound source to TAPE.

1 Open the tape deck.

> There are 2 tape decks on the unit, open

the second one.

2 Insert a blank tape and close the door.

3 Select a mode in which you want to

record.

4 Play back a sound source first.

5 Press

> The display changed in the following

order, “USB REC” <-> “TAPE REC”

6 Press the button once more when

“TAPE REC” is displayed.

> Recording starts.

7 To stop recording, press

PUSH EJECT

TUNER/USB/...

FUNCTION

z REC

ON PLAYER ON REMOTE

Synchronized Recording from CD to Tape

1 Open the tape deck and then insert

a blank tape.

2 Close the door and insert a CD.

> Audio CD only

3 To select CD function, press

4 Press the button on a stop status to

move to CD synchronizing mode.

> Recording automatically starts 7

seconds later after “CD SYNC” blinks.

5 To stop, press

PUSH EJECT

CD OPEN

DVD/CD

CD SYNC.

Z OPEN/CLOSE

FUNCTION

ON PLAYER

ON REMOTE

MDS714-A0U_FOUANI_ENG_8458.indd 18 2009.2.25 5:26:46 PM

Area Codes

Choose a area code from this list.

Area Code

Afghanistan AFT Argentina AR Australia AU Austria AT Belgium BE Bhutan BT Bolivia BO Brazil BR Cambodia KH Canada CA Chile CL China CN Colombia CO Congo CG

Area Code

Costa Rica CR Croatia HR Czech Republic CZ Denmark DK Ecuador EC Egypt EG El Salvador SV Ethiopia ET Fiji FJ Finland FI France FR Germany DE Great Britain GB Greece GR

Area Code

Greenland GL Hong Kong HK Hungary HU India IN Indonesia ID Israel IL Italy IT Jamaica JM Japan JP Kenya KE Kuwait KW Libya LY Luxembourg LU Malaysia MY

Area Code

Maldives MV Mexico MX Monaco MC Mongolia MN Morocco MA Nepal NP Netherlands NL Netherlands Antilles AN New Zealand NZ Nigeria NG Norway NO Oman OM Pakistan PK Panama PA

Area Code

Paraguay PY Philippines PH Poland PL Portugal PT Romania RO Russian Federation RU Saudi Arabia SA Senegal SN Singapore SG Slovak Republic SK Slovenia SIB South Africa ZA South Korea KR Spain ES

Area Code

Sri Lanka LK Sweden SE Switzerland CH Taiwan TW Thailand TH Turkey TR Uganda UG Ukraine UA United States US Uruguay UY Uzbekistan UZ Vietnam VN Zimbabwe ZW

Language Codes

Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu.

Language Code

Afar 6565 Afrikaans 6570 Albanian 8381 Ameharic 6577 Arabic 6582 Armenian 7289 Assamese 6583 Aymara 6588 Azerbaijani 6590 Bashkir 6665 Basque 6985 Bengali, Bangla 6678 Bhutani 6890 Bihari 6672 Breton 6682 Bulgarian 6671 Burmese 7789 Byelorussian 6669 Chinese 9072

Language Code

Croatian 7282 Czech 6783 Danish 6865 Dutch 7876 English 6978 Esperanto 6979 Estonian 6984 Faroese 7079 Fiji 7074 Finnish 7073 French 7082 Frisian 7089 Galician 7176 Georgian 7565 German 6869 Greek 6976 Greenlandic 7576 Guarani 7178 Gujarati 7185

Language Code

Hausa 7265 Hebrew 7387 Hindi 7273 Hungarian 7285 Icelandic 7383 Indonesian 7378 Interlingua 7365 Irish 7165 Italian 7384 Javanese 7487 Kannada 7578 Kashmiri 7583 Kazakh 7575 Kirghiz 7589 Korean 7579 Kurdish 7585 Laothian 7679 Latin 7665 Latvian, Lettish 7686

Language Code

Lingala 7678 Lithuanian 7684 Macedonian 7775 Malagasy 7771 Malay 7783 Malayalam 7776 Maori 7773 Marathi 7782 Moldavian 7779 Mongolian 7778 Nauru 7865 Nepali 7869 Norwegian 7879 Oriya 7982 Panjabi 8065 Pashto, Pushto 8083 Persian 7065 Polish 8076 Portuguese 8084

Language Code

Quechua 8185 Rhaeto-Romance 8277 Rumanian 8279 Russian 8285 Samoan 8377 Sanskrit 8365 Scots Gaelic 7168 Serbian 8382 Serbo-Croatian 8372 Shona 8378 Sindhi 8368 Singhalese 8373 Slovak 8375 Slovenian 8376 Spanish 6983 Sudanese 8385 Swahili 8387 Swedish 8386 Tagalog 8476

Language Code

Tajik 8471 Tamil 8465 Telugu 8469 Thai 8472 Tonga 8479 Turkish 8482 Turkmen 8475 Twi 8487 Ukrainian 8575 Urdu 8582 Uzbek 8590 Vietnamese 8673 Volapük 8679 Welsh 6789 Wolof 8779 Xhosa 8872 Yiddish 7473 Yoruba 8979 Zulu 9085

MDS714-A0U_FOUANI_ENG_8458.indd 19 2009.2.25 5:26:47 PM

Troubleshooting

Symptom

Cause Correction

No power

POWER

The power cord is not plugged in.

Plug in the power cord.

No sound

Some noise occurs.

RADIO

The function switch is not set to the Radio mode. There are electronic devices near the unit.

The antenna is positioned or connected poorly

Set the switch to the Radio mode. Set the unit far from the devices.

Check the antenna connection and adjust its position

The unit does not start playback

No picture

DVD/CD

An unplayable disc is inserted. The disc is placed upside down. The disc is not placed within the guide.

The TV is not set to receive the video signal

Insert a playable disc. Place the disc with the playback side down. Place the disc on the disc tray correctly inside the guide.

Clean the disc. Select the appropriate video input model on the TV so the

picture from the unit appears on the TV

Unable to record

TAPE

Record protect tabs are removed. Cover holes on back edge of tape with tap.

REMOTE CONTROL

The remote control is not pointed at the remote sensor of the unit directly.

Point the remote control to remote sensor directly of the unit.

The remote control does not work properly.

The battery in the remote control is exhausted. Replace the battery with new ones.

MDS714-A0U_FOUANI_ENG_8458.indd 20 2009.2.25 5:26:47 PM

+ 46 hidden pages