LG MDD-D710A User Manual
MDS712_ENG_TASHKENT_MFL37207011
Mini Home Theater
OWNER’S MANUAL
MODEL : MDD-D710A
MDD-D710A,
MDS712V, MDS712S, MDS712C, MDS712W
Before connecting, operating or adjusting this product, please read this instruction booklet carefully and completely.
USB 
R
Safety Precautions
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: TO REDUCE THE RISK
OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
CAUTION: Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from over heating.
The openings should be never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instruction have been adhered to.
CAUTION:
This Product employs a Laser System.
To ensure proper use of this product, please read this owner’s manual carefully and retain for future reference, should the unit require maintenance, contact an authorized service locationsee service procedure.
Use of controls, adjustments or the performance of procedures other than those specified herein may result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM.
CAUTION: The apparatus shall not be exposed to water, dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.
CAUTION:
VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon a dedicated circuit;
That is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain.
Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer.
Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance.
Disposal of your old appliance
1.When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC.
2.All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities.
3.The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health.
4.For more detailed information about disposal of your old appliance, please contact your city office, waste disposal service or the shop where you purchased the product.
Power Save Mode - OPTIONAL
You can set up the unit into an economic power save mode.
In power-on status, press and hold POWER ( 
/[) button for about 3 seconds.
-Nothing is displayed in the display window when the unit is turned off.
To cancel, press 
/[ (POWER), CLOCK, TIMER or PLAY MODE(DEMO).
2
Table of Contents |
|
Before Use |
Introduction
Safety Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Table of Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Before Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Front Panel/ Rear Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Preparation
Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-9
Before Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-16
Operation
Operation with DVD and Video CD . . . . . . . . . . . . . . . . 17-18 Operation with Audio CD and MP3/WMA Disc . . . . . . . . . . 19 Operation with JPEG Disc . . . . . . . . . . . . . . . . . . . . . . . . . 20 Operation with DivX Disc . . . . . . . . . . . . . . . . . . . . . . . . . 21 Operation with RADIO . . . . . . . . . . . . . . . . . . . . . . . . . 22-23 Operation with TAPE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Reference
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Language Code List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Area Code List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Specifications
About Symbols
About the 
symbol display
“ 
” may appear on the TV screen during operation. This icon means the function explained in this owner’s manual is not available on that specific DVD video disc.
About the disc symbols for instructions
A section of which title has one of the following symbols is applicable only to the disc represented by the symbol.
DVD DVD
Video CDs
Audio CDs
MP3 file
WMA file
JPEG file
the symbols for instructions
Caution Indicates hazards likely to cause harm to the unit itself or other material damage.
Indicates special operating features of this unit.
Indicates tips and hints to make the task easier.
Playable Discs
DVD |
INTRODUCTION |
SVCD, and CD-R or CD-RW that contains audio titles, |
|
(8 cm / 12 cm disc) |
|
Video CD (VCD) |
|
(8 cm / 12 cm disc) |
|
Audio CD |
|
(8 cm / 12 cm disc) |
|
In addition, this unit can play a DVD±R, DVD±RW, |
|
MP3, WMA, JPEG or DivX files. |
|
Notes
•Depending on the conditions of the recording equipment or the CD-R/RW (or DVD±R/RW) disc itself, some CD-R/RW (or DVD±R/RW) discs cannot be played on the unit.
•Do not attach any seal or label to either side (the labeled side or the recorded side) of a disc.
•Do not use irregularly shaped CDs (e.g., heart-shaped or octagonal). It may result in malfunctions.
Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic”, and the double-D symbol are trademarks of Dolby Laboratories. Confidential Unpublished works. Copyright 19921997 Dolby Laboratories. All rights reserved.
Manufactured under license from Digital Theater Systems, Inc. U.S. Pat. No’s. 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535 and other U.S. and world-wide patents issued and pending. "DTS" and "DTS Digital Surround” are registered trademarks of Digital Theater Systems, Inc. Copyright 1996, 2003 Digital Theater Systems, Inc. All Rights Reserved."
Regional Code
This unit has a regional code printed on the rear of the unit. This unit can play only DVD discs labelled as the same as the rear of the unit or “ALL”.
Notes on Regional Codes
•Most DVD discs have a globe with one or more numbers in it clearly visible on the cover. This number must match your unit’s regional code or the disc cannot play.
•If you try to play a DVD with a different regional code from your player, the message “Check Regional Code” appears on the TV screen.
3
Front Panel/ Rear Panel
1 |
14 |
|
|
2 |
|
|
|
13 |
|
|
|
|
|
|
|
|
12 |
15 |
19 |
3 |
11 |
|
|
4 |
10 |
16 |
|
|
18 |
||
5 |
9 |
|
|
6 |
|
|
|
7 |
8 |
17 |
|
|
|
|
1.DISPLAY WINDOW
2.• ( 
/[)POWER button
•CLOCK button
•TIMER button
•DUBBING (DUBB.)/ CD SYNCHRO RECORDING (CD SYNC.)/ (ST./MO.) button
3.MULTI JOG
•MANUAL TUNING
•CD SKIP
•CLOCK ADJUST
4.HEADPHONE Jack (PHONES): 
3.5 mm
5.USB 
connector
6.• FUNCTION SELECT buttons
(TUNER,TAPE, DVD/CD,AUX)
•EQ. button
•XTS Pro button
•USB button
•XDSS plus button
7.Z PUSH EJECT position (TAPE 1)
8.Z PUSH EJECT position (TAPE 2)
9.• RECORD/RECORD PAUSE (zREC/[]) button
•TUN.(-/+) buttons -AUTO TUNING/
REWIND/ FAST FORWARD (FF/GG) -TAPE/ SCAN (FF/GG) buttons -CD
•PRESET (-/+) buttons/ TAPE REVERSE PLAY (b) button (OPTIONAL) /TAPE FORWARD PLAY (B) button
•STOP (xSTOP) button
10.MIC JACKS (MIC1, MIC2):
6.3 mm : OPTIONAL
11.MIC VOLUME (MIC VOL.)knob
12.Remote control sensor
13.• OPEN/CLOSE (ZOP/CL) button
•DISC SKIP (D.SKIP) button
•PLAY MODE, DEMO button
•SET/CD[], RDS (OPTIONAL) button
14.DISC DOOR
15.• COMPONENT VIDEO OUT (PROGRESSIVE SCAN) (Y PB PR) Connector
•VIDEO OUT Connector
16.• FM/AM ANTENNA Connector
•AUXILIARY INPUT (AUX IN) connector
17.POWER CORD
18.SPEAKER Connectors
19.OPTICAL IN Connector
4
Remote Control
1 |
POWER |
|
|
D.SKIP |
|
|
|
|
|
2 |
TUNER/BAND |
DVD |
AUX |
USB |
|
|
|
|
|
|
|
|
|
SLEEP |
3 |
|
|
|
DIMMER |
|
|
|
|
|
4 |
|
|
|
|
|
1 - TAPE - 2 |
|
|
|
5 |
SETUP |
PRESET + |
DISPLAY |
|
|
|
|
|
|
|
TUN. - |
|
|
TUN. + |
6 |
|
SELECT |
|
|
|
|
/ENTER |
|
|
7 |
MENU |
|
|
TITLE |
8 |
|
|
|
|
9 |
|
PRESET - |
|
|
STOP PAUSE/STEP |
PLAY |
|
||
|
|
|
|
|
|
PROG./MEMO. |
SCAN |
|
|
10 |
REPEAT |
SKIP |
|
|
|
|
|
|
|
|
REPEAT A-B |
MARKER |
SEARCH |
MUTE |
|
EQ |
XTS Pro |
XDSS plus |
VSM |
11 |
SOUND |
AUDIO |
RETURN |
ZOOM |
|
|
|
|
|
|
S-TITLE |
CLEAR |
RDS |
PTY |
|
ECHO VOL. |
MIC VOL. |
||
12
1.POWER button
222. FUNCTION SELECT buttons (TUNER/BAND,DVD, AUX, USB)
3.NUMERIC buttons (0-9)
4.TAPE FUNCTION buttons
21• REVERSE PLAY (F)
• PLAY (G)
20• REWIND/ FAST FORWARD PLAY (FF/GG)
•TAPE 1-2 SELECT buttons (1-TAPE-2)
•RECORD/ RECORD PAUSE (z/[])
•TAPE STOP (x)
5.SETUP button
6.• ARROW buttons (
/ 
/ 
/ 
)
(Selects an option in the menu)
19• PRESET (-/+) buttons (
/ 
)
• TUN. (-/+) buttons (
/ 
)
7.SELECT/ENTER button
8.MENU button
(Use the MENU button to display the menu screen included on DVD video discs.)
189. STOP (x), PAUSE([])/ STEP, PLAY (G) buttons
10.PROG./MEMO., REPEAT, REPEAT A-B buttons
11.EQ, XTS Pro, SOUND, AUDIO, SUBTITLE
17(S-TITLE), CLEAR buttons
12.ECHO VOL. ( 
/ 
) buttons
13.MIC VOL. ( 
/ 
) buttons
14.RDS, PTY buttons - OPTIONAL
16 |
15. |
XDSS plus, VSM (Virtual Sound Matrix), ZOOM, |
||||
|
|
RETURN ( |
|
) buttons |
||
|
|
|
||||
15 |
16. |
• MARKER, SEARCH, MUTE( |
|
) buttons |
||
|
||||||
|
||||||
• - SCAN + (FF/GG)/ - SKIP+ (./>)
17.VOLUME -/+ buttons
14 18. TITLE button
(Use the TITLE button to display the title screen
13included on DVD video discs.)
19.DISPLAY button
20.DIMMER button
21.SLEEP button
22.DISC SKIP (D.SKIP) button
INTRODUCTION
Remote Control Operation Range
Point the remote control toward the remote sensor and press the buttons.
•Distance: About 23 ft (7 m) from the front of the remote sensor
•Angle: About 30° in each direction of the front of the remote sensor
Remote control battery installation
Detach the battery cover on the rear of the remote control, and insert two R03 (size AAA) batteries with 
and 
aligned correctly.
Caution
Do not mix old and new batteries. Never mix different types of batteries (standard, alkaline, etc.).
5
Connections
Connecting to a TV
Make one of the following connections, depending on the capabilities of your existing equipment.
Tips
•Depending on your TV and other equipment you wish to connect, there are various ways you could connect the unit. Use one of the connections described below.
•Please refer to the manuals of your TV, VCR, Stereo System or other devices as necessary to make the best connections.
Caution
•Make sure the unit is connected directly to the TV. Select the correct AV input on your TV.
•Do not connect your unit to TV via your VCR. The DVD image could be distorted by the copy protection system.
Video connection
Connect the VIDEO OUT jack from the unit to the VIDEO IN jack on the TV using the video cable supplied
(V).
Component Video connection
Connect the COMPONENT VIDEO OUT (PROGRESSIVE SCAN) (Y PB PR) jacks from the unit to the corresponding jacks on the TV using a Y PB PR cable (C).
Progressive Scan connection
•If your television is a high-definition or “digital ready” television, you may take advantage of this unit’s progressive scan output for higher video resolution.
•If your TV does not accept the Progressive Scan format, the picture will appear scrambled if you try Progressive Scan on the unit.
Connect the COMPONENT VIDEO OUT (PROGRESSIVE SCAN) (Y PB PR) jacks from the unit to the corresponding jacks on the TV using an optional Y PB PR cable (C).
Notes
Set the Progressive to “On” in the Setup menu for progressive signal, see the page 14.
Rear of TV
VIDEO |
COMPONENT VIDEO / |
IN |
PROGRESSIVE SCAN INPUT |
|
Y |
V C
COMPONENT VIDEO OUT |
(PROGRESSIVE SCAN) |
6
Connections
Connecting to Antenna
Connect the supplied FM/AM antennas to listen to the radio.
•Connect the AM loop antenna to the AM antenna connector.
•Connect the FM wire antenna to the FM antenna connector.
AM(MW) loop antenna (aerial) (Supplied)
Connecting to Auxiliary Equipment
You can use VCR or other unit connected to the AUX connector.
For AM(MW) reception, connect |
|
the loop antenna (aerial) to the |
To AUDIO IN |
terminal marked AM |
|
|
|
IN |
OUT |
|
|
|
VIDEO |
|
|
FM wire |
|
AUDIO (L) |
|
|
antenna |
|
AUDIO (R) |
To AUDIO OUT |
|
(supplied) |
|
|
|
|
|
|
VCR (or Auxiliary |
||
|
|
Device, etc) |
|
|
|
1 |
Connect a VCR or auxiliary device, etc to the |
||
|
AUX connector. |
|
||
AUX IN |
|
Press the AUX button on the front panel or the |
||
2 remote control until the “AUX” indicator is |
||||
|
||||
|
|
displayed in the display window. |
||
PREPARATION
Notes
•To prevent noise pickup, keep the AM loop antenna away from the unit and other component.
•Be sure to fully extend the FM wire antenna.
•After connecting the FM wire antenna, keep it as horizontal as possible.
7
Connections
USB Function
You can enjoy the media files such as tunes (MP3/WMA) saved in an MP3 player or USB memory by connecting the storage device to the USB port of this unit.
Connecting to Optional Equipment
You can use an optical output of a Digital Device to the OPTICAL IN connector.
This unit receives the optical digital signal from optional equipment.
USB Memory, MP3 Player
(or Memory Card Reader, etc.)
Compatible Devices
1.Devices which require additional program installation when you have connected it to a computer, are not supported.
2.MP3 Player : Flash type MP3 player.
The MP3 player requiring installation of a driver is not supported.
3.USB Flash Drive : Devices that support USB2.0 or
USB1.1.
To Remove the USB from the unit
1.Choose the other functions except USB function in order to remove the USB.
2.Remove the USB from the unit.
Note
Besides Basic Playback, if you want to operate other functions, see the CD Playback section.
Notes
•Do not extract the USB device in operating.
•Music files (MP3/WMA),Image Files (JPEG) and Video Files can be played.
•A back up demands to prevent a data damage.
•If you use a USB extension cable or USB hub, the USB device might not be recognized.
•A device using NTFS file system is not supported. (Only FAT (16/32) file system is supported.)
•The USB function of this unit does not support all USB devices.
•Digital camera and mobile phone are not supported.
•This unit is not supported when the total number of files is 1000 or more..
OPTICAL
OUT
Connect an optical output of DVD Player (or
1 Digital Device etc) to the OPTICAL IN connector.
Press the AUX button on the front panel or the 2 remote control until the “ AUX OPT ” indicator
is displayed in the display window.
8
Connections
Speaker System Connection
Connect the speakers using the supplied speaker cables by matching the colors of the terminals and those of the cords. To obtain the best possible surround sound, adjust the speaker parameters (distance, level, etc.).
PREPARATION
Notes
•Be sure to match the speaker cable to the appropriate terminal on the components: + to + and – to –. If the cables are reversed, the sound will be distorted and will lack base.
•If you use front speakers with low maximum input rating, adjust the volume carefully to avoid excessive output on the speakers.
•Connect the Front Left/Right speaker correctly. If it is reversed, the sound may be distorted.
9
Loading...