LG MD9800DV User manual

MD9800DV
P/NO : MFL42956122
R
As an Energy Star® Partner, LG has determined that this product or product models meet the Energy Star® guidelines for energy efficiency.
Energy Star® is a U.S. registered mark.
MD9800DV-A0U_DKENHL_ENG_6122.ind1 1 2009.5.13 5:23:30 PM
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to consti­tute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING: Do not install this equipment in a confined space such as a book case or similar unit.
CAUTION: Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from over heating. The openings shall be never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product shall not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instruction has been adhered to.
CAUTION: This product employs a Laser System.
To ensure proper use of this product, please read this owner’s manual carefully and retain it for future reference. Shall the unit require maintenance, contact an authorized service center.
Use of controls, adjustments or the performance of procedures other than those specified herein may result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM.
CAUTION: The apparatus shall not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, shall be placed on the apparatus.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon a dedicated circuit; That is, a
single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain.
Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or dete­rioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized service center.
Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance.
To disconnect power from the mains, pull out the mains cord plug. When installing the product, ensure that the plug is easily accessible.
This product is manufactured to comply with EMC Directive 2004/108/ EC and Low Voltage Directive 2006/95/EC.
European representative : LG Electronics Service Europe B.V.
Veluwezoom 15, 1327 AE Almere, The Netherlands (Tel : +31-036-547-8940)
2
Safety Precaution
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
MD9800DV-A0U_DKENHL_ENG_6122.ind2 2 2009.5.13 5:23:32 PM
3
Safety Precaution 2 Contents 3
Setting up 4 Hooking up the unit 5 Main Unit 6 Remote control 7 OSD Initial language setting - Optional 8 Initial Setting the Area Code 8 Adjust the general settings 8-10 Enjoying a pre-programmed sound field 11 Setting the clock 11
Displaying Disc Information 12 Playing a Disc 12-14 Viewing photo files 14 Listening to the radio 15 Listening to the cassette tapes 15 Listening to music from your portable player
or external device 16 Using an USB device 16
Power Save Mode
You can set up the unit into an economic power save mode. In power-on status, press and hold
1/\
button for about 3 seconds.
- Nothing is displayed in the display window when the unit is turned off. To cancel, press
1/\
.
Recording to USB 17 Recording to TAPE 18 Synchronized Recording from CD to TAPE 18
Language Codes 19 Area Codes 19 Troubleshooting 20 Types of Playable Discs 21 Specifications 22
Contents
MD9800DV-A0U_DKENHL_ENG_6122.ind3 3 2009.5.13 5:23:33 PM
4
Attaching the speakers to the unit
Setting up
Remote control Operation
Point the Remote Control at the display window and press the buttons.
Remote control Battery Installation
1 Detach the battery cover on the rear of the remote control 2 Insert the R03 (size AAA) battery with 3 and # aligned correctly.
Be careful of the following
• Be careful to make sure children not to put their hands or any objects into the *speaker duct.
* Speaker duct : A hole for plentiful bass sound on speaker cabinet (enclosure).
Grey
Red
Green
Orange
Blue
White
Rear
Front
Center
Sub Woofer
Rear
Front
Behind you and to your right.
In front of you, to the right of the screen.
Above screen, directly in front of you.
This can be placed in any front position.
Behind you and to your left.
In front of you, to the left of the screen.
POSITION
SPEAKER
COLOUR
Connect the black end of each wire to the terminals marked - (minus) and the other end to the terminals marked + (plus). To connect the cable to the each speakers, press each plastic finger pad to open the connection terminals on the back of each speaker. Insert the wire and release the finger pad.
MD9800DV-A0U_DKENHL_ENG_6122.ind4 4 2009.5.13 5:23:34 PM
5
Hooking up the unit
COMPONENT VIDEO OUT (PROGRESSIVE SCAN) jacks connection
Connect one end of the component(Y PB PR) cable to the COMPONENT VIDEO OUT (PROGRESSIVE SCAN) jack on the unit and other end to the COMPONENT INPUT jack on your TV.
VIDEO OUT jack connection
Connect the VIDEO OUT jack on the unit to the corresponding input jacks on your TV using a Video cable.
AUX IN (L/R) jacks connection
Connect a VCR or Auxiliary device, etc. to the INPUT jack of this unit.
Press the FUNCTION button on the remote control until the “AUX” indicator is displayed in the display window.
Antenna connection
Fit the AM loop aerial to its stand
Connect the AM loop aerial to the unit.
Connect the FM aerial
The reception will be at its best when the two loose ends of the aerial are in a straight line and horizontal.
MD9800DV-A0U_DKENHL_ENG_6122.ind5 5 2009.5.13 5:23:35 PM
1
1/\ Turn ON/ OFF.
2
Display window
3
Disc tray
4
- z/\\ Recording/Pauses
- ./> REWIND or FAST FORWARD Auto Tuning/ SCAN/ Setting clock
- b/B PRESET FORWARD/ REVERSE PLAY
- x STOP/CLEAR
5
USB direct recording
6
PRO EQ
BASS (100 Hz)/ MIDDLE (1 KHz)/ TREBLE (10 KHz)
7
CD OPEN
8
DISC SKIP
Choose a desired disc.
9
DUBB. Recording from tape to tape.
CD SYNC. CD to Tape Synchronized.
ST./MO. To improve the FM reception
on TUNER.
10
SET Confirms the settings.
(TIMER/ CLOCK/ PRO EQ)
CD II Pauses
11
REV. MODE
Scroll through a selection of cassette playing options. DEMO In power off state to demonstrate the function on display window. To cancel it, press 1/\ or this button again.
12
AUX/PORT.
Auxiliary device/ Portable in.
6
Main unit
6
7
8
13
Selects TUNER function.
14
Selects TAPE function.
15
Selects DVD/CD function.
16
Selects USB function.
17
PRO EQ
18
Volume control
19 20
Cassette Door 1, 2
21
TIMER
(
Use your player as an alarm clock.)
22
CLOCK (
See setting the Clock )
23 24
EQ./LG EQ
You can choose fixed sound impression.
25 XDSS plus
Reinforce the treble, bass and surround effect.
26
USB connector
27
PHONES Headphone jack
28
PORT. IN For connecting a portable
device and playing it through this system’s speakers.
29 30
MIC 1, 2
31
ECHO VOL. U/u
Adjust microphone echo volume.
32
MIC VOL. U/u
Adjust microphone volume.
9
1 2 43 5
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26 27 28 29 30
31 32
MD9800DV-A0U_DKENHL_ENG_6122.ind6 6 2009.5.13 5:23:40 PM
7
Remote control
a
b
c
d
2
1
POWER: Switches the unit ON or OFF. FUNCTION: Changes the function. SLEEP:
Sets the System to turn off automatically at a specified time. (Dimmer : Dims the LED (Light-emitting diode) of front panel by half in power-on status.)
Z OPEN/CLOSE: Open or close your CD door. TITLE: If the current DVD title has a menu, the title menu
appears on the screen. Otherwise, the disc menu may appear.
DISPLAY: Accesses On-Screen Display. MENU: Accesses the menu on a DVD disc. SETUP: Accesses or removes setup menu.
I i U u (left/right/up/down): Used to navigate on-screen displays.
ENTER: Acknowledges menu selection. PRESET (U u): Selects programme of Radio.
TUN. -/+ (I i): Tunes in the desired radio station.
RETURN (O): Moving back wards in the menu. REC (z): Recording to USB/ TAPE. STOP (x): Stops playback or recording. PLAY (B): Starts playback. MO./ST.: MONO/STEREO FM mode state, selects
MONO or STEREO by pressing this button.
PAUSE/STEP(X): Pausing playback. SCAN(bb/BB): Search backward or forward.
SKIP(./>):
Go to next or previous chapter/track/Title.
D.SKIP: Choose a desired disc. MUTE: To mute the sound. VOL (Volume) +/-: Adjusts speaker volume. EQ/ LG EQ (
EQUALIZER Effect): You can choose sound
impressions.
0-9 numerical buttons: Selects numbered options in a menu. REPEAT/RANDOM : To select a play mode. (Random,
repeat) SUBTITLE: During playback, you can select a desired
subtitle language.
TV Control buttons : Controls the TV. (LG TV only)
PROG./MEMO.: Accesses or removes Program menu. MIC VOL.(+/ - ): Adjusts microphone volume. ECHO VOL.(+/ - ): Adjusts echo volume. VOCAL FADER: You can enjoy the function as karaoke,
by reducing singer vocal of music in the various source.
CLEAR: Removes a track number on the Program List.
Controlling the TV.
You can control the sound level, input source, and power switching of LG TVs as well. Hold POWER (TV) and press PR/CH (+/–) button repeatedly until the TV turns on or off.
1 3
4
MD9800DV-A0U_DKENHL_ENG_6122.ind7 7 2009.5.13 5:23:43 PM
8
Adjust the general settings
ON REMOTE
1 Display setup menu SETUP
2 Select a desired option on the first level
U u
3 Move to second level
i
4 Select a desired option on the second level
U u
5 Move to third level
i
6 Change the setting U u and ENTER
OSD Initial language setting - Optional
1 Turn the power on
The language list appears POWER
2 Select the language
U u I i
3 Press ENTER
4 To confirm press
I i and ENTER
During the first use of this unit, the initial language setup menu appears on your TV screen. You must complete initial language selection before using the unit. English will be selected as the initial language.
ON REMOTE
Initial Setting the Area Code
1 Display setup menu SETUP
2 Select LOCK menu on the first level
U u
3 Move to second level
The activated Area Code appears on the second level.
i
4 Move to the third level
i
5 Enter a new password numerical buttons
(0-9) and ENTER
6 Recheck the entered new password numerical buttons
(0-9) and ENTER
7 Select a code for a geographic area
After select, Rating and Password will be
U u I i and
activated. (page 19) ENTER
8 To confirm what you press
Make sure to finish setting the Area Code before leaving the setup menu if you cannot set the rating and Password
ENTER
When you use this unit for the first time, you have to set the Area Code as shown below.
ON REMOTE
Adjust the general settings - More you can do
Adjust the language settings
OSD – Selects a language for the Setup menu and on-screen display.
Disc Audio/ Disc Subtitle/ Disc Menu –
Selects a language for the Audio/ Menu/ Subtitle.
[Original]: Refers to the original language in which the disc was recorded. [Others]: To select another language, press number buttons then ENTER to
enter the corresponding 4-digit number according to the language code list in the reference chapter. Refer to the language code on Page 19.
[OFF] (for Disc Subtitle): Turn off Subtitle.
MD9800DV-A0U_DKENHL_ENG_6122.ind8 8 2009.5.13 5:23:43 PM
Loading...
+ 16 hidden pages