LG MD9350DV, MD9700DV User manual

R

As an Energy Star® Partner,
LG has determined that this
product or product models meet
the Energy Star® guidelines for
energy efficiency.

Energy Star® is a U.S. registered mark.

P/NO : MFL42956121

ENGLISH

MD9350DV
MD9700DV

MD9350DV-A0U_DKENHL_ENG_6121.ind1 1 2009.5.13 5:24:43 PM

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE
COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.

This lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of uninsulated dangerous voltage
within the product’s enclosure that may be of sufficient magnitude to consti­tute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the product.

WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT
EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
WARNING: Do not install this equipment in a confined space such as a book case or
similar unit.

CAUTION: Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions.

Slots and openings in the cabinet are provided for ventilation and to ensure reliable
operation of the product and to protect it from over heating. The openings shall be
never be blocked by placing the product on a bed, sofa, rug or other similar surface.
This product shall not be placed in a built-in installation such as a bookcase or rack
unless proper ventilation is provided or the manufacturer's instruction has been
adhered to.

CAUTION: This product employs a Laser System.

To ensure proper use of this product, please read this owner’s manual carefully and
retain it for future reference. Shall the unit require maintenance, contact an authorized
service center.

Use of controls, adjustments or the performance of procedures other than those
specified herein may result in hazardous radiation exposure.

To prevent direct exposure to laser beam, do not try to open the enclosure. Visible
laser radiation when open. DO NOT STARE INTO BEAM.

CAUTION: The apparatus shall not be exposed to water (dripping or splashing) and
no objects filled with liquids, such as vases, shall be placed on the apparatus.

CAUTION concerning the Power Cord

Most appliances recommend they be placed upon a dedicated circuit; That is, a

single outlet circuit which powers only that appliance and has no additional outlets or
branch circuits. Check the specification page of this owner's manual to be certain.

Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets,
extension cords, frayed power cords, or damaged or cracked wire insulation are
dangerous. Any of these conditions could result in electric shock or fire. Periodically
examine the cord of your appliance, and if its appearance indicates damage or dete­rioration, unplug it, discontinue use of the appliance, and have the cord replaced with
an exact replacement part by an authorized service center.

Protect the power cord from physical or mechanical abuse, such as being twisted,
kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs,
wall outlets, and the point where the cord exits the appliance.

To disconnect power from the mains, pull out the mains cord plug. When installing the
product, ensure that the plug is easily accessible.

This product is manufactured to comply with EMC Directive 2004/108/
EC and Low Voltage Directive 2006/95/EC.

European representative :
LG Electronics Service Europe B.V.

Veluwezoom 15, 1327 AE Almere, The Netherlands
(Tel : [phone])

2

Safety Precaution

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

MD9350DV-A0U_DKENHL_ENG_6121.ind2 2 2009.5.13 5:24:45 PM

3

Safety Precaution 2
Contents 3

Setting up 4
Hooking up the unit 5
Main Unit 6
Remote control 7
OSD Initial language setting - Optional 8
Initial Setting the Area Code 8
Adjust the general settings 8-10
Setting the sound mode 10-11
Setting the clock 11

Displaying Disc Information 12
Playing a Disc 12-14
Viewing photo files 14
Listening to the radio 15
Listening to the cassette tapes 15
Listening to music from your external device 16
Using an USB device 16

Recording to USB 17
Recording to TAPE 18
Synchronized Recording from CD to TAPE 18

Language Codes 19
Area Codes 19
Troubleshooting 20
Types of Playable Discs 21
Specifications 22

Contents

MD9350DV-A0U_DKENHL_ENG_6121.ind3 3 2009.5.13 5:24:46 PM

4

Attaching the speakers to the unit

Setting up

Be careful of the following

• Be careful to make sure children not to put their hands or any objects into the
*speaker duct.

* Speaker duct : A hole for plentiful bass sound on speaker cabinet (enclosure).

Connect the black end of each wire to the terminals marked - (minus) and the
other end to the terminals marked + (plus).
To connect the cable to the each speakers, press each plastic finger pad to
open the connection terminals on the back of each speaker. Insert the wire and
release the finger pad.

Red

White

Front

Front

In front of you, to the right of the screen.

In front of you, to the left of the screen.

POSITION

SPEAKER

COLOUR

MD9350DV/ MD9700DV (2 channel)

MD9350DV-A0U_DKENHL_ENG_6121.ind4 4 2009.5.13 5:24:47 PM

5

Hooking up the unit

COMPONENT VIDEO OUT
(PROGRESSIVE SCAN) jacks
connection

Connect one end of the component
(Y PB PR) cable to the COMPONENT
VIDEO OUT (PROGRESSIVE SCAN)
jack on the unit and other end to the
COMPONENT INPUT jack on your TV.

VIDEO OUT jack connection

Connect the VIDEO OUT jack on the unit
to the corresponding input jacks on your TV
using a Video cable.

AUX IN (L/R) jacks connection

Connect a VCR or Auxiliary device, etc. to the
INPUT jack of this unit.

Press the FUNCTION button on the remote control
until the “AUX” indicator is displayed in the display
window.

Antenna connection

Fit the AM loop aerial to its stand

Connect the AM loop aerial to the unit.

Connect the FM aerial

The reception will be at its best when the two loose ends of
the aerial are in a straight line and horizontal.

MD9350DV-A0U_DKENHL_ENG_6121.ind5 5 2009.5.13 5:24:48 PM

1

Disc tray

2

1/\ STANDBY/ON

3

Display window

4

CLOCK

5

TIMER

6

USER EQ

7

Selects DVD/CD function.

Selects TUNER function.
Selects TAPE function.
Selects AUX function.

8

SET Confirms the settings.

(TIMER/ CLOCK)

CD II Pauses
PRESET(-)
.m TUNING(-)
USB Selects USB function.
DEMO In power off state to

demonstrate the function on display
window. To cancel it, press 1/\ or
this button again.

9

Headphone jack

10

USB connector

11

Cassette Door 1, 2

6

Main unit

12

Z OPEN/CLOSE: Open or close your CD
door.

13

DISC SKIP

Choose a desired disc.

14

EQ

You can choose fixed sound
impression

15

XDSS

Extreme Dynamic Sound System
Reinforce the treble, bass and
surround effect.

MP3 OPT

Optimizes compressible MP3 files so
that it improves the bass sound.

16

REC/PAUSE(USB/TAPE)

17

LG EQ

You can choose fixed sound
impression

18

CD SYNC. CD to Tape Synchronized.

DUBB. Recording from tape to tape.

B PRESET (+)

M> TUNING(+)
x STOP

19

MIC VOL.

Adjust microphone volume.

20

MIC 1, 2

21

Volume control

2

19

3
4
5

6

1

7

8

10

9

12

13
14
15

16

17
18

20

11

21

Power Save Mode

You can set up the unit into an economic power save mode.
In power-on status, press and hold

1/\

button for about 3 seconds.

- Nothing is displayed in the display window when the unit is turned off.
To cancel, press

1/\

.

MD9350DV-A0U_DKENHL_ENG_6121.ind6 6 2009.5.13 5:24:49 PM

7

Remote control

Remote control Operation

Point the Remote Control at the display window and press
the buttons.

Remote control Battery Installation
1 Detach the battery cover on the rear of the remote control.

2 Insert the R03 (size AAA) battery with 3 and # aligned

correctly.

a

b

c

d

2

1

POWER: Switches the unit ON or OFF.
FUNCTION: Changes the function.
SLEEP:

Sets the System to turn off automatically at a
specified time. (Dimmer : Dims the LED (Light-emitting
diode) of front panel by half in power-on status.)

Z OPEN/CLOSE: Open or close your CD door.
TITLE: If the current DVD title has a menu, the title menu

appears on the screen. Otherwise, the disc menu may
appear.

DISPLAY: Accesses On-Screen Display.
MENU: Accesses the menu on a DVD disc.
SETUP: Accesses or removes setup menu.

I i U u (left/right/up/down): Used to navigate
on-screen displays.

ENTER: Acknowledges menu selection.
PRESET (U u): Selects programme of Radio.

TUN. -/+ (I i): Tunes in the desired radio station.

RETURN (O): Moving back wards in the menu.
REC (z): Recording to USB/ TAPE.
STOP (x): Stops playback or recording.
PLAY (B): Starts playback.
MO./ST.: MONO/STEREO FM mode state, selects MONO

or STEREO by pressing this button.

PAUSE/STEP(X): Pausing playback.
SCAN(bb/BB): Search backward or forward.

SKIP(./>): Go to next or previous chapter/track/Title.

D.SKIP: Choose a desired disc.
MUTE: To mute the sound.
VOL (Volume) +/-: Adjusts speaker volume.
EQ/ LG EQ (

EQUALIZER Effect): You can choose sound

impressions.

0-9 numerical buttons: Selects numbered options in a menu.
REPEAT/RANDOM : To select a play mode. (Random,

repeat)
SUBTITLE: During playback, you can select a desired

subtitle language.

TV Control buttons : Controls the TV. (LG TV only)

PROG./MEMO.: Accesses or removes Program menu.
MIC VOL.(+/ - ): Adjusts microphone volume.
ECHO VOL.(+/ - ): Adjusts echo volume.
VOCAL FADER: You can enjoy the function as karaoke, by

reducing singer vocal of music in the various source.

CLEAR: Removes a track number on the Program List.

Controlling the TV.

You can control the sound level, input source, and
power switching of LG TVs as well. Hold POWER (TV)
and press PR/CH (+/–) button repeatedly until the TV
turns on or off.

1 3

4

MD9350DV-A0U_DKENHL_ENG_6121.ind7 7 2009.5.13 5:24:51 PM

8

Adjust the general settings

ON REMOTE

1 Display setup menu SETUP

2 Select a desired option on the first level

U u

3 Move to second level

i

4 Select a desired option on the second level

U u

5 Move to third level

i

6 Change the setting U u and
ENTER

OSD Initial language setting - Optional

1 Turn the power on

The language list appears POWER

2 Select the language

U u I i

3 Press ENTER

4 To confirm press

I i and ENTER

During the first use of this unit, the initial language setup menu
appears on your TV screen. You must complete initial language selec­tion before using the unit. English will be selected as the initial lan­guage.

ON REMOTE

Initial Setting the Area Code

1 Display setup menu SETUP

2 Select LOCK menu on the first level

U u

3 Move to second level

The activated Area Code appears on the
second level.

i

4 Move to the third level

i

5 Enter a new password numerical buttons

(0-9) and ENTER

6 Recheck the entered new password numerical buttons

(0-9) and ENTER

7 Select a code for a geographic area

After select, Rating and Password will be

U u I i and

activated. (page 19) ENTER

8 To confirm what you press

Make sure to finish setting the Area Code
before leaving the setup menu if you cannot
set the rating and Password

ENTER

When you use this unit for the first time, you have to set the Area
Code as shown below.

ON REMOTE

Adjust the general settings - More you can do

Adjust the language settings

OSD – Selects a language for the Setup menu and on-screen display.

Disc Audio/ Disc Subtitle/ Disc Menu –

Selects a language for the Audio/ Menu/
Subtitle.

[Original]: Refers to the original language in which the disc was recorded.
[Others]: To select another language, press number buttons then ENTER to

enter the corresponding 4-digit number according to the language
code list in the reference chapter.
Refer to the language code on Page 19.

[Off] (for Disc Subtitle): Turn off Subtitle.

MD9350DV-A0U_DKENHL_ENG_6121.ind8 8 2009.5.13 5:24:51 PM