LG MCV904-A0P Owner's Manual

LGEPS_MCV904P_ENG_3937.qxd 4/20/09 1:54 PM Page 1

ENGLISH

MCV904P (MCV904-A0P

MCS904F, MCS904S, MCS904W/ AW)

MCT704P (MCT704-A0P

MCS704F, MCS704W)

MCD504P (MCD504-A0P, MCS504F)

As an ENERGY STAR® Partner, LG has determined that this product or product models meet the ENERGY STAR® guidelines for energy efficiency.

ENERGY STAR® is a U.S. registered mark.

iPhone is a trademark of Apple Inc.

iPod is a trademark of Apple Computer, Inc, registered in the U.S. and other countries.

LGEPS_MCV904P_ENG_3937.qxd 4/20/09 1:54 PM Page 2

Safety Precaution

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

WARNING: Do not install this equipment in a confined space such as a book case or similar unit.

CAUTION: Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.

Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from over heating. The openings should be never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instruction has been adhered to.

CAUTION: This product employs a Laser System.

To ensure proper use of this product, please read this owner’s manual carefully and retain it for future reference. Should the unit require maintenance, contact an authorized service center. Use of controls, adjustments or the performance of procedures other than those specified herein may result in hazardous radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM.

CAUTION: The apparatus should not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, should be placed on the apparatus.

CAUTION concerning the Power Cord

Most appliances recommend they be placed upon a dedicated circuit

That is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain.

Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer.

Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance.

To disconnect power from the mains, pull out the mains cord plug. When installing the product, ensure that the plug is easily accessible.

2

LGEPS_MCV904P_ENG_3937.qxd 4/20/09 1:54 PM Page 3

There is so much your Hi-Fi system can do ENGLISH

Contents

Setting up	4
Main Unit	5
About Remote control	6
Listening to CDs	7
Listening to the radio	7
Listening to cassette tapes	8
Using an USB device	8
Listening to music from your portable player
or external device	9
Enjoying a pre-programmed sound field	9
PRO EQ	10
Synchronized Recording from CD to Tape	10
Recording to TAPE	10
Recording to USB	11
Setting the Clock	12
Using an iPod (optional)	13
Troubleshooting	14
Specifications	15

Put the battery into the remote control

Make sure for the + (plus) and – (minus) on the battery to be matched on the remote control. (size AAA)

The making of unauthorized copies of copy-protected material, including computer programs, files, broadcasts and sound recordings, may be an infringement of copyrights and constitute a criminal offense. This equipment should not be used for such purposes.

Be responsible Respect copyrights

Before connecting, operating or adjusting this product, please read this instruction booklet carefully and completely.

3

LGEPS_MCV904P_ENG_3937.qxd 4/20/09 1:54 PM Page 4

Setting up

(FM - aerial)

Using the subwoofer MCV904P
You can use the sound of the subwoofer
the bass. Press “SUB WOOFER” on
repeatedly, the display changes in
order, SUB_WOOFER ON - SUB_	.

(AM - aerial)

1 Connection of the front speakers

Connect the speaker cables to the front speaker terminals.

Connect the black end of each wire to the terminals marked - (minus) and the other end to the terminals marked + (plus).

2 Connection		MCV904P
Connect the speaker cables to the surround		.
3 Connection of the subwoofer
Connect the subwoofer(A) cables to the		terminals.
MCV904P
Connect the	speaker cables to the
subwoofer(A)	. MCV904P

4 Fit the AM loop aerial to its

Connect the AM loop aerial to

5

4

MCV904P

Be careful of the following

Be careful to make sure children not to put their hands or any objects into the *speaker duct.

*speaker duct : A hole for plentiful bass sound on speaker cabinet(enclosure).

Connecting to AUDIO OUT

You can enjoy music by connecting external device.

subwoofer (A) subwoofer (B)

3

3

MCT704P/ MCD504P

5 Connect the FM aerial

The reception will be at its best when the two loose ends of the aerial are in a straight line and horizontal.

6 Plug the power plug into a wall socket

NOTES:

•If TV screen becomes discolored do not place speakers within 30cm from TV.

•Be sure to match the speaker cord to the appropriate terminal on the components: + to + and – to –. If the cords are reversed, the sound will be distorted and will lack base.

4

LGEPS_MCV904P_ENG_3937.qxd 4/20/09 1:54 PM Page 5

Main Unit

	1	1/] POWER on/off			14	You can select the CD function.
		POWER SAVE MODE			15	CD/ TAPE Synchronized Recording
	2 Choose a desired CD					Starts playback/ Clock setting/ CD
						pause
	3	DISPLAY WINDOW
					16 You can select the TAPE function.
	4	OPEN / CLOSE
					17	Stops playback or recording
	5 R (REC) (USB REC/ TAPE REC)				18	MIC VOL.
						Adjusts the microphone volume by
	6	XDSS				turning MIC VOL.
					19	MIC
		Extreme Dynamic Sound System
						You can sing to a music source by
		Reinforce the treble, bass and surround
						connecting a microphone (not supplied)
		effect.
			23	24		to the unit.
		MP3 OPT.
					20	PORT. IN
		Optimizes compressible MP3 files so	25
						For connecting a portable device and
		that it improves the bass sound.
						playing it through the system’s speakers.
	7	PRO EQ	26
					21	USB port
	8 To select TUNER function
						Connect a USB compatible device
	9	VOCAL FADER	27		22	here.
		When you listen to music, it reduce		18		Cassette door
		the vocal of file.
			28	19	23	LG EQ/ DEMO
	10	You can select the USB (iPod) function.
					24	SUB WOOFER MCV904P MCT704P
	11	PORTABLE		20
		The unit can be used to play the music		21		(Optional)/ AM NOISE
		from many types of portable player.			25	PRESET + (CD PLAY, TAPE FWD PLAY)
		AUX				PRESET - (TAPE RVS PLAY)
		You can connect many other types of			26	VOLUME
		audio or audio visual device to the		22		Controls the volume when using any
		system via the auxiliary sockets			27	function.
		(AUX IN) on the back of the unit.				TUNING (+) (CD Next/ TAPE FF)
	12 CLOCK					TUNING (-) (CD Prev/ TAPE REW)
					28	PRO EQ
		For setting the clock and checking the
		time.				Controls sound register
	13 TIMER					(Low→BASS (100 Hz),
		With the TIMER function you can turn				Middle→Middle (1 KHz),
		CD, tape, USB play and TUNER				Highe→TREBLE (10 KHz))
		reception on or off at a desired time.

5