LG MCD212-A0U Owner’s Manual

ENGLISH

MODEL : MCD112

MCD212

FOUANI_MCD212_ENG_MFL40387021

MINI Hi-Fi SYSTEM ] USER GUIDE

There is so much your Hi-Fi system can do

Lull me to sleep

and wake me up

Go to page 9

Play CDs and

cassettes

Go to pages 6 & 7

Record from a CD, AUX, USB or radio

to cassette

Go to pages 8

Contents

Setting up 3 About Player 4 About Remote control 5 Listening to CDs 6 Connecting your portable USB player

- OPTIONAL 6 Listening to the radio 7 Listen to cassette tapes 7 Recording 8 USER EQ 8 Setting the Clock 8 Use your player as an alarm clock 9 About MP3/WMA 9 Safety Precaution 10 Troubleshooting 11 Specifications 11

Before connecting, operating or adjusting this product, please read this instruction booklet carefully and completely.

Setting up

Connect the speaker cables to the player

Cables from the left-hand speaker connect to the terminal marked L (left) + (plus) and - (minus). Cables from the right-hand speaker are connected to the terminal marked R (right) + (plus) and - (minus). To connect the cable to the player, press each of the four square plastic finger pads on the rear of the player. The connector will open ready to receive a cable.

Fit the AM loop aerial to its stand

Connect the AM loop aerial to the player.

Connect the FM aerial

The reception will be at its best when the two loose ends of the aerial are in a straight line and horizontal.

Plug the power plug into a wall socket

Put the batteries in the remote control

Make sure that the + (plus) and

- (minus) on the batteries match those on the remote control.

MINI Hi-Fi SYSTEM ] USER GUIDE

About Player

POWER

You can set up the unit into an economic power save mode. In the power-on status, press and hold 1/] (POWER) for about 3 seconds. To cancel power save mode, press 1/] (POWER).

ST./MONO

Press ST./MONO. This will change the tuner from stereo to mono and usually improve the reception.

Headphone jack

Connect a headphone plug ( 3,5 mm) into the jack to listen to the sound through headphones (not supplied).

MP3 OPT. (MP3 Optimizer)

This function is optimized for compressible MP3 files so that it improves the bass sound.

DEMO

Press DEMO in power off state to demonstrate the function on display window. To cancel it, press

11/]]

or DEMO again.

CD tray

XTS - PRO

The function creates the optimum sound for

you to play of the original sound. Each time you press XTS - PRO, “XTS -- PRO ON” or

“XTS -- PRO OFF” is displayed in turn. (The

XTS Pro function will not be operated when a

headphone has been connected.)

VOLUME

Control the volume when using any function.

USB connector - OPTIONAL

Connect a remote USB compatible player

here.

AUX

You can connect many other types of audio or audio visual device to the system via the

auxiliary sockets (AUX IN) on the back of the

player.

D.SKIP

If more than one portable USB player is

connected to the system at the same time,

press D.SKIP to select one of them.

+ 8 hidden pages