LG MAX220UBP1A User Guide

OWNER’S MANUAL

DIGITAL MEDIA RECEIVER

Please read this manual carefully before operating your set and retain it for future reference.

MAX220UB / MAX221UB

ENGLISH

www.lg.com.mx

Getting Started2

Safety Information

CAUTION

Getting Started

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This lightning  ash with arrowhead symbol within an equilateral triangle is intended to alert the user to

dangerous voltage within the product’s enclosure that may be of su cient magnitude to constitute a risk of electric shock to persons.

(servicing) instructions in the literature accompanying the product.

WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

WARNING: Do not install this equipment in a con ned space such as a book case or similar unit.

driving, and always be fully aware of all driving condition. Do not change settings,

the presence of uninsulated

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance

Always operate the vehicle in a safe manner. Do not become distracted by the vehicle while

or any functions. Pull over in a safe and legal manner before attempting such operations.

Do not use for many hours at extremely low or high temperature. (-10 °C to 60 °C)

To reduce the risk of electric shock, do not remove the cover

or back of this product. There are no user-serviceable parts inside. Refer servicing to quali ed service personnel.

To reduce the risk of  re or

electric shock, do not expose this

product to dripping or splashing water, rain, or moisture.

The temperature of unit’s outside

can be extremely high, please use

the unit after proper installation in your vehicle.

While driving, keep the sound

volume at a proper level.

Do not drop it and avoid heavy

impacts at anytime.

This unit is for vehicles with a

12-volt battery and negative

grounding. Before installing it in a recreational vehicle, lorry or bus, check the battery voltage. To avoid shorts in the electrical system, be sure to disconnect the E battery cable before beginning the installation.

This device is equipped with a portable battery or accumulator.

Safe way to remove the battery or the battery from the equipment:

Remove the old battery or battery pack, follow the steps in reverse order than the assembly. To prevent contamination of the environment and bring on possible threat to human and animal health, the old battery or the battery put it in the appropriate container at designated collection points. Do not dispose of batteries or battery together with other waste. It is recommended that you use local, free reimbursement systems batteries and accumulators. The battery shall not be exposed to excessive heat such as sunshine,  re or the like.

Table of Contents 3

Table of Contents

1 Getting Started

2 Safety Information

4 Front panel

4 Remote control

(Optional)

5 – Battery Installation

2 Connecting

5 Installation

5 – Basic Installation

5 – Removing the existing

receiver unit

5 – ISO-DIN Installation

6 About detachable control

panel

7 Connection

7 – Connecting to a car

3 Operating

8 Operation

8 – Basic operations

8 – Turning off the sound

temporarily

8 – Using EQ (Equalizer)

8 – Using 3D SOUND

8 – Checking the clock

8 – Turning off the display light

8 – Resetting the unit

8 – Adjusting the general

settings

9 Listening to music from an

external device

9 – Preventing radical changes

in volume as switching

sources

9 Listening to the radio

9 – Storing desired

frequencies manually

10 – Listening to a preset

station

10 – Adjusting TUNER settings

11 Using an USB device

11 – Pausing or restarting USB

playback

11 – Searching for a section

within a file

11 – Skipping to another file

11 – Moving to another MP3/

WMA file/folder

11 – Checking information

about your music

11 – Playing back files in a way

you want

11 – Moving to another drive

11 – Quick search of a desired

file

11 – Playable USB device

Requirement

4 Troubleshooting

12 Troubleshooting

5 Appendix

13 Specifications

Getting Started4

Getting Started

Front panel

SRC / • OFF

- When pressed, selects function sources.

- When pressed and held, powers unit on or o .

b T

Plays and pauses playback.

MUTE

Temporarily stops the sound.

PRESET/LIST/ENTER

(Volume knob)

- Adjusts volume level.

- Confirms the settings.

- Checks  les or preset stations.

DISP

- Press it, you can check the clock time.

- Press and hold it, you can turn on/o the display window and the light of LED buttons.

BAND

- Selects a band in Tuner mode.

- Moves to a next USB drive.

• TA (Optional)

- Searches stations that have TA / TP information, when it is pressed and held.

Remote Sensor (Optional)

Display window

USB port

h i

Returns to the previous step.

j Y/U

Skip / Search / Seek / Tune

• MENU

Activates setting menu.

FUNC In each mode, sets playback items.

l W/S

- Moves to the previous or next preset station in TUNER

- Moves 10 MP3 / WMA  les backward or forward if there is no folder or one folder on an USB.

- Moves to the previous or next folder if there are more than 2 folders on an USB.

EQ • 3D

Improves sound quality.

- When pressed, selects the EQ function.

- When pressed and held, selects the 3D SOUND function.

n 6

Opens the front panel.

AUX

If connected to other portable player, you can enjoy music from it on the unit.

Remote control (Optional)

SRC / • OFF

- When pressed, selects function sources.

- When pressed and held, powers unit o .

FUNC

When pressed, sets playback items in each mode.

• MENU

When pressed and held, activates setting menu.

BAND

Selects a band in Tuner mode.

DRV

Moves to a next USB drive.

d d/M e f g

Plays or pauses playback.

SHF Shu es playback.

MUTE Temporarily stops the sound.

VOLUME W /

Adjusts volume level.

Connecting 5

h c

Skip / Search / Seek / Tune

Returns to the previous step.

- List up / down

- Adjusts settings.

- Moves 10 MP3 / WMA  les backward or forward if there is no folder or one folder on an USB.

- Moves to the previous or next folder if there are more than 2 folders on an USB.

ENTER / LIST

- Con rms the settings.

Checks  les or preset stations.

DISP

- Press it, you can check the clock time.

- Press and hold it, you can turn on/ o the display window and the light of LED buttons.

RPT

Repeats playback.

INT

Intro scan.

Numeric buttons (1 to 6)

Selects a numbered preset station in TUNER.

Battery Installation

Type 1

Type 2

Note

Use only one CR2025 (3 V) lithium

battery.

Remove the battery if the remote

control is not used for a long period of time.

Do not leave the product in a hot

or humid place.

Do not handle the battery with

metallic tools.

Do not store the battery with

metallic materials.

Installation

Basic Installation

Before installing, make sure that the ignition-switch is set to OFF and remove the terminal of the car battery to avoid short-circuiting.

Bend the claws according to the thickness of the dashboard.

Control panel

1. Remove the existing receiver unit.

2. Make the necessary connections.

3. Install the installation sleeve.

4. Install the unit into the installation sleeve.

Removing the existing receiver unit

If there is already an installation sleeve for the receiver unit in the dashboard, it must be removed.

1. Remove the rear support from the unit.

2. Remove the control panel and trim ring from the unit.

3. Insert the lever into the hole on one side of the unit. Perform the same operation on the other side and pull the unit out from the mounting sleeve.

ISO-DIN Installation

Connecting

Control panel

1. Slide the unit into the ISO-DIN frame.

2. Fit screws removed from the old unit.

3. Slide the unit and frame into the dash opening.

4. Install the dash panel or adapter plate.

(According to models, this step may

not be needed.)

5. Install the trim ring to the unit.

6. Install the control panel to the unit.

+ 10 hidden pages