OWNER’S MANUAL
Magic Remote
Please read this manual carefully before operating your set and retain it for future reference.
AN-MR400
Remote control (AN-MR400G)
RF Dongle (AN-MR400D)
www.lg.com (Brazil : www.lge.com)
2
/Q.MENU
YRO FK
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Magic Remote Control and |
|
|
|
|
|||
Alkaline Batteries (AA) |
Owner’s Manual |
RF Dongle |
RF Dongle Cable |
Velcro |
|||
(Depending on |
|||||||
|
|
|
|
||||
country) |
|
|
|
|
Wheel (OK)
Selects menus or options and confirms your input. Scrolls through the saved channels.
If you press the navigation button while moving the pointer on the screen, the pointer disappears, and the Magic Remote Control works as a regular remote control.
To display the pointer again, shake the Magic Remote control from side to side.
BACK
Returns to the previous screen.
Voice recognition
Network connection is required to use the voice recognition function.
1.Press the Voice recognition button.
2.Speak when the voice display window appears on the left of the TV screen.
* Use the Magic remote control no further than
10 cm from your face. The voice recognition may fail when you speak too fast or too slow.
The recognition rate may vary depending on the user’s characteristics (voice, pronunciation, intonation, and speed) and the environment (noise and TV volume).
Used for viewing 3D video.
EDFN |
VPDUW |
/Q.MENU
YRO FK
POWER
Turns the TV on or off.
, , ,
Navigation (up/down/left/right)
Scrolls through menus or options.
SMART
Accesses the Smart Home menu.
/Q.MENU
Accesses the Universal Control Menu. Accesses the quick menu.
MUTE
Mutes all sounds.
VOL/ (+/-)
Adjusts the volume level.
CH/P(/ )
Scrolls through the saved channels.
*Image shown may differ from your product.
*If the TV you purchased does not support 3D, the 3D button has no function.
-Non 3D models: LN**, PN**, MS53*, MS73*
Installing Batteries
Please read this manual carefully and use the TV correctly.
Press the end of the battery cover, slide it back and lift the cover as shown below.
To replace batteries, open the battery cover, replace Alkaline batteries (1.5 V AA)
matching and ends to the label inside the compartment, and close the battery cover. Be sure to point the remote control at the remote control sensor on the TV.
To remove the batteries, perform the installation actions in reverse. Don’t mix old or used batteries with new ones. Close the cover securely.